Üdvözöljük az NVDA kiegészítők weboldalánNVDA Community Addonshttp://addons.nvda-project.org/index.hu.htmlNVDA Community Addonsikiwiki2024-03-26T20:46:22ZCustom Browse Modehttp://addons.nvda-project.org/addons/customBrowseMode.hu.html2024-03-11T05:29:28Z2024-03-10T19:16:56Z
<ul>
<li>Author: Noelia Ruiz Martínez, Ever Solis</li>
</ul>
<p>This add-on is used to activate or deactivate profiles deppending on the
state of browse mode.</p>
<p>Currently, when browse mode is active, a profile named browseMode will be
activated, and it will be deactivated when browse mode becomes inactive.</p>
<p>The browseMode profile will be automatically created if it doesn't exist.</p>
Perky Duckhttp://addons.nvda-project.org/addons/perky.hu.html2024-03-10T19:12:06Z2024-02-15T09:04:01Z
<ul>
<li>Authors: Alejandro Iván Castro Orozco, Noelia Ruiz Martínez</li>
</ul>
<p>This add-on is used to improve the reading experience with Perky Duck,
available at <a href="https://www.duxburysystems.com">https://www.duxburysystems.com</a>.</p>
<h3>Features</h3>
<ul>
<li>Enables NVDA to detect selection changes when UI Automation is disabled in
Perky Duck. Without the add-on, NVDA detects these changes only when UI
Automation is enabled.</li>
<li>Adds the possibility of using the speak typed characters feature of NVDA
in Perky Duck documents.</li>
</ul>
<h3>Commands</h3>
<p>The following commands can be assigned from NVDA's menu, Preferences
submenu, Input gestures dialog, Perky Duck category. This will be available
from Perky Duck documents:</p>
<ul>
<li>Opens the symbols dialog for reading characters typed in Perky. From this
dialog, you can save and choose symbols dictionaries.</li>
<li>Shows the selected text converted to braille using symbols for the current
language.</li>
<li>Shows the selected text in browse mode.</li>
</ul>
Custom Notificationshttp://addons.nvda-project.org/addons/customNotifications.hu.html2024-02-13T14:38:14Z2024-02-08T18:50:45Z
<ul>
<li>Authors: José Fischer, Noelia Ruiz Martínez</li>
</ul>
<p>This add-on is used to customize toast notifications.</p>
<p>You can choose to read the whole notification or just the application which
sends it, and if notifications will be spoken, displayed in braille or both.</p>
<h2>Settings</h2>
<p>Go to NVDA's menu, Preferences submenu, Settings, and select the Custom
Notifications category. There you'll find the following controls:</p>
<ul>
<li>A checkbox to choose if notifications should be truncated, checked by
default.</li>
<li>An edit box to set the start limit of notifications, empty by default.</li>
<li>An edit box to set the end limit of notifications, ", " (comma space) by
default.</li>
<li>A list of checkboxes to select if notifications should be spoken and
displayed in braille, both checked by default.</li>
<li>An edit box to type a text to send a test notification, to get an idea of
how NVDA will present toasts.</li>
<li>If the previous edit box contains text, a button to send a notification,
so you can test if your selected settings work fine for you.</li>
</ul>
<p>You can assign a gesture to open the add-on settings panel, and to toggle
various add-on settings, from NVDA's menu, Preferences submenu, Input
gestures dialog, Configuration category.</p>
<h2>Changes for 2.0.0</h2>
<ul>
<li>In the add-on settings panel, added an edit box to set the start limit of
notifications.</li>
</ul>
Remote Desktop Accessibilityhttp://addons.nvda-project.org/addons/rdAccess.hu.html2023-08-29T16:58:22Z2023-07-27T14:08:30Z
<ul>
<li>Authors: <a href="https://github.com/leonardder/">Leonard de Ruijter</a></li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=rdAccess">latest stable version</a></li>
<li>NVDA compatibility: 2023.2 and later</li>
</ul>
<p>The RDAccess add-on (Remote Desktop Accessibility) adds support to access
remote desktop sessions to NVDA using Microsoft Remote Desktop, Citrix or
VMware Horizon. When installed in NVDA on both the client and the server,
speech and braille generated on the server will be spoken and brailled by
the client machine. This enables a user experience where managing a remote
system feels just as performant as operating the local system.</p>
<h2>Features</h2>
<ul>
<li>Support for Microsoft Remote Desktop, Citrix and VMware Horizon</li>
<li>Speech and braille output</li>
<li>Automatic detection of remote braille using NVDA's automatic braille
display detection</li>
<li>Automatic detection of remote speech using a dedicated detection process
that can be disabled in NVDA's settings dialog</li>
<li>Support for portable copies of NVDA running on a server (additional
configuration required for Fitrix)</li>
<li>Full support for portable copies of NVDA running on a client (no
additional administrative privileges required to install the add-on)</li>
<li>Multiple active client sessions at the same time</li>
<li>Remote desktop instantly available after NVDA start</li>
<li>Ability to control specific synthesizer and braille display settings
without leaving the remote session</li>
<li>Ability to use speech and braille from the user session when accessing
secure desktops</li>
</ul>
<h2>Changelog</h2>
<h3>Version 1.0</h3>
<p>Initial stable release.</p>
<h2>Getting started</h2>
<ol>
<li>Install RDAccess in both a client and server copy of NVDA.</li>
<li>The remote system should automatically start speaking using the local
speech synthesizer. If not, in the NVDA instance on the server, select
the remote speech synthesizer from NVDA"s synthesizer selection dialog.</li>
<li>To use braille, enable automatic braille display detection using the
braille display selection dialog.</li>
</ol>
<h2>Configuration</h2>
<p>After installation, the RDAccess add-on can be configured using NVDA's settings dialog, which can be accessed from the NVDA Menu by choosing Preferences > Settings...
After that, choose the Remote Desktop category.</p>
<p>This dialog contains the following settings:</p>
<h3>Enable remote desktop accessibility for</h3>
<p>This list of check boxes controls the operating mode of the add-on. You can
choose between:</p>
<ul>
<li>Incoming connections (Remote Desktop Server): Choose this option if the
current instance of NVDA is running on a remote desktop server</li>
<li>Outgoing connections (Remote Desktop Client): Choose this option if the
current instance of NVDA is running on a remote desktop client that
connects to one or more servers</li>
<li>Secure Desktop pass through: : Choose this option if you want to use
braille and speech from the user instance of NVDA when accessing the
secure desktop. Note that for this to work, you need to make the RDAccess
add-on available on the secure desktop copy of NVDA. For this, choose "Use
currently saved settings during sign-in and on secure screens (requires
administrator privileges)" in NVDA's general settings.</li>
</ul>
<p>To ensure a smooth start with the add-on, all options are enabled by
default. You are however encouraged to disable server or client mode as
appropriate.</p>
<h3>Automatically recover remote speech after connection loss</h3>
<p>This option is only available in server mode. It ensures that the connection
will automatically be re-established when the Remote Speech synthesizer is
active and the connection is lost. The behavior is very similar to that of
braille display auto detection. This also clarifies why there is only such
an option for speech. The reconnection of the Remote Braille display is
automatically handled when choosing the Automatic option from the Braille
Display Selection dialog.</p>
<p>This option is enabled by defalt. You are strongly encouraged to leave this
option enabled if the Remote Desktop server has no audio output.</p>
<h3>Allow remote system to control driver settings</h3>
<p>This client option, when enabled, allows you to control driver settings
(such as synthesizer voice and pitch) from the remote system. This is
especially useful when you have difficulties accessing the local NVDA menu
when controlling a remote system. Changes performed on the remote system
will automatically be reflected locally.</p>
<p>While enabling this option implies some performance degradation, you are yet
advised to enable it. When this option is disabled, speech synthesizer
ppitch changes for capitals don't work.</p>
<h3>Persist client support when exiting NVDA</h3>
<p>This client option is only available on installed copies of NVDA. When
enabled, it ensures that the client portion of NVDA is loaded in your remote
desktop client, even when NVDA is not running.</p>
<p>To use the client portion of RDAccess, several changes have to be maede in
the Windows Registry. The add-on ensures that these changes are made under
the profile of the current user. These changes don't require administrative
privileges. Therefore, NVDA can automatically apply the necessary changes
when loaded, and undo these changes when exiting NVDA. This ensures that
the add-on is fully compatible with portable versions of NVDA.</p>
<p>This option is disabled by default. However, if you are running an
installed copy and you are the only user of the system, you are advised to
enable this option. This ensures smooth operation in case NVDA is not
active when connecting to a remote system and is then started afterwards.</p>
<h3>Enable Microsoft Remote Desktop support</h3>
<p>This option is enabled by default and ensures that the client portion of
RDAccess is loaded in the Microsoft Remote Desktop client (mstsc) when
starting NVDA. Unless persistent client support is enabled by enabling the
previous option, these changes will be automatically undone when exiting
NVDA.</p>
<h3>Enable Citrix Workspace support</h3>
<p>This option is enabled by default and ensures that the client portion of
RDAccess is loaded in the Citrix Workspace app when starting NVDA. Unless
persistent client support is enabled by enabling the previous option, these
changes will be automatically undone when exiting NVDA.</p>
<p>This option is only available in the following cases:</p>
<ul>
<li>Citrix Workspace is installed. Note that the Windows Store version of the
app is not supported due to limitations in that app itself</li>
<li>It is possible to register RDAccess under the current user context. After
installing the app, you have to start a remote session once to make this
possible</li>
</ul>
<h2>Citrix specific instructions</h2>
<p>There are some important points of attention when using RDAccess with the
Citrix Workspace app.</p>
<h3>Client side requirements</h3>
<ol>
<li>The Windows Store variant of the app is <em>not</em> supported.</li>
<li>After installing Citrix Workspace, you have to start a remote session
once to allow RDAccess registering itself. The reason behind this is that
the application copies the system configuration to the user configuration
when it establishes a session for the first time. After that, RDAccess
can register itself under the current user context.</li>
</ol>
<h3>Server side requirement</h3>
<p>In Citrix Virtual Apps and Desktops 2109, Citrix enabled the so called
virtual channel allow list. This means that third party virtual channels,
including the channel required by RDAccess, is not allowed by default. For
more information, <a href="https://www.citrix.com/blogs/2021/10/14/virtual-channel-allow-list-now-enabled-by-default/">see this Citrix blog
post</a></p>
<p>Explicitly allowing the RdPipe channel required by RDAccess is not yet
tested. For now, it is probably your best bet to disable the allow list
altogether. If your system administrator is unhappy with this, feel free to
<a href="https://github.com/leonardder/rdAccess/issues">drop a line in the devoted issue</a></p>
<h2>Issues and contributing</h2>
<p>If you want to report an issue or contribute, take a look at <a href="https://github.com/leonardder/rdAccess/issues">the issues
page on Github</a></p>
<h2>External components</h2>
<p>This add-on relies on <a href="https://github.com/leonardder/rd_pipe-rs">RD Pipe</a>, a library written in Rust backing the
remote desktop client support. RD Pipe is redistributed as part of this
add-on under the terms of <a href="https://github.com/leonardder/rd_pipe-rs/blob/master/LICENSE">version 3 of the GNU Affero General Public
License</a> as published by the Free Software Foundation.</p>
WhatsAppPlushttp://addons.nvda-project.org/addons/whatsAppPlus.hu.html2023-06-12T14:03:02Z2023-06-11T16:37:15Z
<ul>
<li>Author: Kostya Gladkiy (Ukrain)</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=whatsAppPlus">stable version</a> (Compatible with NVDA 2021.2 to 2023.1)</li>
<li><a href="https://t.me/unigramPlus">Telegram channel</a></li>
</ul>
<h2>About</h2>
<p>This add-on makes it easy to use the UWP version of the WhatsApp app,
allowing users to easily interact with chats, messages, context menu items,
and more.</p>
<h3>General features</h3>
<ul>
<li>When replying to a message, the edit field will change the title.</li>
<li>Added accessibility labels for some WhatsApp elements.</li>
<li>A large number of keyboard shortcuts have been added to work productively
and comfortably in WhatsApp, which can be found below.</li>
</ul>
<h2>Keyboard shortcuts:</h2>
<ul>
<li>ALT+1: Move focus to chat list.</li>
<li>ALT+2: Move focus to the last message in an open chat.</li>
<li>ALT+D: Move the focus to the edit field. If the focus is already in the
edit field, then after pressing the hotkey, it will move to where it was
before.</li>
<li>ALT+T: Announce the name and status of an open chat.</li>
<li>ALT+shift+C: Make a voice call to a group or contact, or join an ongoing
voice call in a group.</li>
<li>ALT+shift+V: Make a video call to a contact or group.</li>
<li>ALT+shift+Y: Accept call.</li>
<li>ALT+shift+N: Decline an incoming call or leave the current call.</li>
<li>ALT+A: Turn the microphone on/off.</li>
<li>ALT+V: Turn video on/off.</li>
<li>ALT+O: Press more options button.</li>
<li>control+R: Record and send a voice message.</li>
<li>control+D: Discard reply to a message or currently recorded voice message.</li>
<li>control+shift+D: Pause/resume voice message recording.</li>
<li>ALT+delete: Delete a message or chat.</li>
<li>control+shift+P: Open current chat profile.</li>
<li>control+shift+E: Toggles the feature that removes the reading of the user
number in messages from users whose number is not saved in the contact
list.</li>
<li>ALT+S: Star message.</li>
<li>ALT+F: Forward message.</li>
<li>ALT+R: Reply to message.</li>
<li>ALT+shift+R: Mark a chat as read.</li>
<li>control+C: Copy the message if it contains text.</li>
<li>ALT+C: Show message text in popup window.</li>
<li>NVDA+control+W: Open WhatsAppPlus settings window.</li>
<li>ALT+3: Move focus to "unread messages" label.</li>
<li>control+shift+A: Press the attach file button.</li>
<li>ALT+L: Enable automatic reading of new messages in the current chat.</li>
<li>control+S: Increase/decrease the playback speed of voice messages.</li>
<li>ALT+P: Play/pause a voice message that is playing.</li>
<li>ALT+U: announce the current value of a progress bar. If pressed twice,
turns on/off the automatic announcement of progress bars.</li>
<li>control+space: Switch to selection mode.</li>
</ul>
<h3>Information about the opportunity to donate to the developer:</h3>
<p>If you have a desire, and most importantly, the opportunity to support the
developer of this add-on, you can do it using the following details:</p>
<ul>
<li>PayPal: gladkiy.kostya@gmail.com.</li>
<li><a href="https://unigramplus.diaka.ua/donate">Ukrainian donation system</a></li>
<li>Card number: 5169360009004502 (Gladkiy Constantine).</li>
</ul>
<h2>Changelog</h2>
<h3>Version 1.9.0</h3>
<ul>
<li>Added a keyboard shortcut that opens a list of all WhatsAppPlus keyboard
shortcuts. By default, this function is assigned to ALT+H gesture.</li>
<li>Fixed a bug where ALT+2 and ALT+3 gestures didn't work.</li>
<li>Fixed a bug where it was impossible to activate some functions from the
context menu using gestures.</li>
<li>Fixed an issue where changing voice message playback speed and pausing
voice message playback did not always work.</li>
<li>Fixed a bug where in chats when focusing on your sent messages, instead of
the word "you", the screen reader announced a personal number. To avoid
this, you need to specify the phone number in the WhatsAppPlus settings
and after that the add-on will not report it on your messages.</li>
<li>Fixed an issue where WhatsAppPlus prompted to update on secure screens. To
prevent this from happening again, you need to click on the "Use currently
saved settings during sign-in and on secure screens (requires
administrator privileges)" button in the NVDA general settings.</li>
<li>The gesture to accept a call has been changed to ALT+shift+Y, and the
gesture to decline a call has been changed to ALT+shift+N. This is to
ensure that these gestures do not conflict with UnigramPlus gestures.</li>
<li>Microphone and camera on/off gestures during a call now work correctly.</li>
<li>Removed gesture to set reaction to messages, since in the latest versions
of WhatsApp, reactions are available directly from the context menu.</li>
</ul>
<h3>Version 1.8.0</h3>
<ul>
<li>The add-on has been tested to ensure compatibility with NVDA-2023.</li>
<li>Added a keyboard shortcut for selecting messages. To enter selection mode,
press Ctrl+Space, and then use Space to select the next message.</li>
<li>A new function has been added to automatically announce activity in an
open chat. By default, this feature is enabled by double-pressing the
ALT+T gesture. This helps users stay up to date with new messages and
other chat activities.</li>
<li>The automatic reading of new chat messages has been significantly
redesigned to be more stable. This ensures that users are alerted to new
messages accurately and reliably.</li>
<li>Added labels for some unlabeled buttons.</li>
</ul>
<h3>Version 1.7.0</h3>
<ul>
<li>Added a function that automatically announces the progress bar if the
focus is on a message.</li>
<li>Added a keyboard shortcut to report the value of the progress bar when the
focus is on a message. By default, the ALT+U gesture is assigned to this
feature. If the gesture is pressed twice, the automatic announcement of
the progress bar values will be enabled.</li>
<li>Fixed an issue where focus could not be moved to the chat list.</li>
<li>Added labels to some elements.</li>
</ul>
<h3>Version 1.6.0</h3>
<ul>
<li>Added ability to quickly reply to group members. To enter a message, it is
enough to write the symbol "@" in the message entry field, use the up and
down arrows to select who you want to reply to, and then press the Enter
key.</li>
<li>Added ability to quickly insert emoticons. To do this, you must write a
colon and the name of the emoticon you want to find in the message input
field. Later, use the left and right arrow keys to find the desired
emoticon and use the Enter key to insert it into the message input field.</li>
<li>In the WhatsAppPlus settings, an option has been added to enable the
playback of sounds when recording, pausing and sending voice messages.</li>
<li>Changed the keyboard shortcut for opening the profile of the current
conversation to Control+Shift+P.</li>
<li>Added Nepali localization.</li>
<li>Fixed several bugs, including an issue where automatic reading of new
messages in an open conversation was not working for some users.</li>
</ul>
<h3>Version 1.5.0</h3>
<ul>
<li>Added a keyboard shortcut to change the speed of the voice message being
played. The default gesture is ctrl+s. The gesture will only work when a
voice message is playing in an open chat.</li>
<li>Added a keyboard shortcut to pause a voice message that is playing. The
default gesture is alt+p. The function will only work when a voice message
is playing in an open chat.</li>
<li>Now the announcement of a new message in an open chat can be enabled not
only until NVDA is restarted, but also forever.</li>
</ul>
<h3>Version 1.4.0</h3>
<ul>
<li>Adapted to the latest version of WhatsApp.</li>
<li>Added automatic reading of new messages in open chat. By default, this
feature is activated by pressing ALT+L. The feature remains active only
until NVDA is restarted. May have stability issues if there are too many
new messages.</li>
<li>Added French localization.</li>
</ul>
<h3>Version 1.3.0</h3>
<ul>
<li>The description of the links attached to the message will now be read.</li>
<li>Now the duration of voice messages will be announced.</li>
<li>You can now open links attached to messages with the spacebar</li>
<li>Added labels for some interface elements</li>
<li>Adapted to the latest version of WhatsApp so that all functions work
properly.</li>
<li>Fixed some bugs</li>
</ul>
<h3>Version 1.2.0</h3>
<ul>
<li>Now, when you focus on a message written in reply to another message, the
text of that message will be spoken first and then the text of the message
to which it was sent.</li>
<li>The name and type of files sent in the conversation will now be spoken.</li>
<li>ALT+1 now works even when the chat archive or the selected messages
section is open.</li>
<li>ALT + left arrow helps to close the chat archive or the selected messages
list if they are open.</li>
<li>Now, pressing control+D, in addition to cancelling voice messages, also
cancels the reply to the message.</li>
<li>Information about the impossibility of recording a voice message will now
be reported when the message input field is not empty. This will fix an
issue where pressing Ctrl+R would send a text message instead of starting
to record a voice message.</li>
<li>Added labels for unlabeled elements.</li>
</ul>
<h3>Version 1.1.0</h3>
<ul>
<li>Added keyboard shortcut to navigate to unread messages. Since this feature
is language dependent, this feature can be configured in the WhatsAppPlus
settings.</li>
<li>Added keyboard shortcut for pressing the new chat button.</li>
<li>Added keyboard shortcut for pressing the attach file button.</li>
<li>NVDA will no longer announce the recording control buttons when recording
a voice message.</li>
<li>Added Arabic, Italian, Romanian, Serbian, Croatian, Spanish and Turkish
localizations.</li>
<li>Added labels for some unlabeled elements.</li>
<li>Now information about the reaction to the message will be announced when
focusing on the message.</li>
<li>Now, when playing your own voice messages using the spacebar, a pop-up
window will not appear.</li>
<li>Fixed minor bugs.</li>
</ul>
NVDA Dev & Test Toolboxhttp://addons.nvda-project.org/addons/nvdaDevTestToolbox.hu.html2024-02-16T08:51:25Z2023-06-05T11:56:08Z
<ul>
<li>Author: Cyrille Bougot</li>
<li>NVDA compatibility: 2019.2 and beyond</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=nvdaDevTestToolbox">stable version</a></li>
</ul>
<p>This add-on gathers various features for NVDA debugging and testing.</p>
<h2>Features</h2>
<ul>
<li>An enhanced restart dialog to specify some extra options when restarting
NVDA.</li>
<li>Various features related to logged errors.</li>
<li>An object property explorer.</li>
<li>An extended script description mode: when enabled input help mode report
information on scripts that have no description.</li>
<li>Commands to help log reading and analyzing.</li>
<li>Backups of old logs</li>
<li>In the Python console workspace, a function to open the source code of an
object.</li>
<li>A custom startup script for the Python console</li>
<li>A command to log the stack trace of the speech.speak function.</li>
</ul>
<h2>Enhanced restart dialog</h2>
<p>The NVDA+shift+Q command opens a dialog to specify some extra options before
restarting NVDA. The options that can be specified correspond to the
<a>command line options</a> that can be used with <code>nvda.exe</code>, e.g. <code>-c</code> for
config path, <code>--disable-addons</code> to disable add-ons, etc.</p>
<h2>Features related to logged errors</h2>
<h3>Report last logged error</h3>
<p>Pressing NVDA+shift+alt+E allows to report the last error logged without
needing to open the log. A second press clears the memorized last error.</p>
<h3>Play a sound for logged errors</h3>
<p>The <a>"Play a sound for logged errors" setting</a> has been introduced in
NVDA 2021.3 and allows to specify if NVDA will play an error sound in case
an error is logged.</p>
<p>This add-on provides an additional command (NVDA+control+alt+E) to toggle
this setting. You can choose:</p>
<ul>
<li>"Only in test versions" (default) to make NVDA play error sounds only if
the current NVDA version is a test version (alpha, beta or run from
source).</li>
<li>"Yes" to enable error sounds no matter your current NVDA version.</li>
</ul>
<p>For NVDA prior to 2021.3, this add-on provides the backport of this feature
and the possibility to control it with the keyboard command. The checkbox
in the Advanced settings panel is not backported however.</p>
<h2>Object property explorer</h2>
<p>This feature allows to report some properties of the current navigator
object without opening the log viewer.</p>
<p>To list the properties of an object, move the navigator object to it and use
the following commands:</p>
<ul>
<li>Selects the previous property and reports it for the navigator object.</li>
<li>Selects the next property and reports it for the navigator object.</li>
<li>Reports the currently selected property for the navigator object; two
presses displays this information in a browseable message.</li>
</ul>
<p>The list of the supported properties is the following: name, role, state,
value, windowClassName, windowControlID, windowHandle, location, Python
class, Python class mro.</p>
<p>When using object navigation commands, you can also choose to have the
currently selected property reported instead of NVDA usual object
reporting. A toggle command allows to switch between this custom reporting
of objects and NVDA usual reporting.</p>
<p>For exemple, you may select "windowClassName" property and enable custom
object reporting. Then when moving the navigator object to next or previous
object, you will hear the object's windowClassName instead of usual
reporting.</p>
<p>All the commands of the Object property explorer are unassigned by default;
you will have to assign them a shortcut in the Input gesture dialog to use
them.</p>
<h2>Extended script description mode</h2>
<p>When the Extended script description mode is active, the input help mode
(NVDA+1) is modified as follows. If a script has no description, the
script's name and class are reported. If a script has a description, its
description is reported as usual. The gesture to activate or deactivate
this feature is NVDA+control+alt+D.</p>
<p>Executing a gesture bound to a script without description in input help mode
also create an entry for this script in the gesture management dialog. This
entry is located in a dedicated category called "Scripts without description
(modify at your own risk!)". This allow to easily add, delete or change the
native NVDA gestures for these script. Be aware however that it is often
intended that such script do not have any description to prevent the user to
modify the associated gesture. Indeed, the gesture may be defined to match
an application shortcut key. For example the script script_toggleItalic on
NVDAObjects.window.winword.WordDocument is bound to control+I and this
should not be modified since the gesture is passed to the application to
actually execute the shortcut key.</p>
<h3>Usage example</h3>
<p>Control+shift+I also toggle italic in Word, even if it is not natively
reported by NVDA. To have the control+shift+I result reported by NVDA as
control+I, you should perform the following steps:</p>
<ul>
<li>Open a Word document.</li>
<li>Enable the extended script description mode with NVDA+control+alt+D.</li>
<li>Enter input help mode with NVDA+1.</li>
<li>Press control+I to report the italic script and have it added in the
gesture dialog.</li>
<li>Exit input help mode with NVDA+1.</li>
<li>Open the input gestures dialog.</li>
<li>In the category "Scripts without description (modify at your own risk!)",
select the command "toggleItalic on
NVDAObjects.window.winword.WordDocument".</li>
<li>Add the control+shift+I shortcut and validate.</li>
<li>If you want, exit the extended script description mode with
NVDA+control+alt+D.</li>
</ul>
<p>Known bug: A script added for a specific class is visible even if gesture
manager is opened in another context.</p>
<h2>Log reading and analyzing features</h2>
<p><a id="logPlaceMarkers"></a></p>
<h3>Place markers in the log</h3>
<p>While testing or working, you may want to mark a specific moment in the log, so that you can turn to it easily later when reading the log.
To add a marker message in the log, press NVDA+control+K.
A message as follows will be logged at INFO level:<br />
<code>-- NDTT marker 0 --</code><br />
You can add as many markers as you want in the log. The marker's number
will be incremented each time you place a marker in the log; it will only be
reset when NVDA is restarted.</p>
<h3>Log reader mode</h3>
<p>A log reader mode provides commands to ease log reading and analyzing. In
the log viewer window the log reader is enabled by default, thus log reading
commands are available immediately. In another text reading area such as an
editor (e.g. Notepad++) or a webpage (e.g. GitHub issue), you need to press
NVDA+control+alt+L to enable log reader mode and use its commands. When you
are done with log reading and analyzing tasks, you can disable again
NVDA+control+alt+L to disable the log reader mode.</p>
<p>The commands available in log reader mode are described hereafter.</p>
<p><a id="logReaderQuickNavigationCommands"></a></p>
<h4>Quick navigation commands</h4>
<p>Single letter command similar to browse mode quick navigation keys allow to
move to various type of log messages:</p>
<ul>
<li>m: any message</li>
<li>e: error messages (<code>ERROR</code> and <code>CRITICAL</code>)</li>
<li>w: warning messages (<code>WARNING</code>)</li>
<li>f: info messages (<code>INFO</code>)</li>
<li>k: markers previously <a href="http://addons.nvda-project.org/index.hu.html#logPlaceMarkers">placed in the log</a></li>
<li>g: debug warning messages (<code>DEBUGWARNING</code>)</li>
<li>i: input/output messages (<code>IO</code>)</li>
<li>n: input messages</li>
<li>s: speech messages</li>
<li>d: debug messages (<code>DEBUG</code>)</li>
</ul>
<p>Pressing the single letter moves to the next occurrence of this
message. Combining the letter with the shift key moves to the previous
occurrence of this message.</p>
<h4>Translation of speech message</h4>
<p>Sometimes, you may have to look at a log taken on a system in a foreignh
language that you do not understand. E.g. the log was taken on a Chinese
system / NVDA, whereas you only understand French. If you have <a href="https://addons.nvda-project.org/addons/instantTranslate.en.html">Instant
Translate</a> add-on installed, you may use it in conjonction with <a href="http://addons.nvda-project.org/index.hu.html#logReaderQuickNavigationCommands">quick
log navigation commands</a> to have speech
messages translated.</p>
<ul>
<li>First configure Instant Translate's languages. The source language should
be the language of the system where the log has been taken
(e.g. Chinese). The target language should be your language (e.g. French).</li>
<li>Open the log</li>
<li>Press T to enable automatic speech translation in the log</li>
<li>Use Quick navigation commands in the log, e.g. S, I, etc. Whenever a
speech message is encountered, it will be spoken in your language (French
in our previous example)</li>
</ul>
<p>If you want to disable speech translation, press T again.</p>
<p><a id="logReaderOpenSourceFile"></a></p>
<h4>Open the file of the source code in your editor</h4>
<p>In the log some line may refer to the source code:</p>
<ul>
<li>A line belonging to a traceback contains the path and the line in a file,
e.g.:
<code> File "virtualBuffers\__init__.pyc", line 226, in _getStoryLength</code></li>
<li>The header line of a logged message contains the function which has logged
this message, e.g.:
<code>INFO - config.ConfigManager._loadConfig (22:45:26.145) - MainThread (16580):</code></li>
<li>The content of a message logged in input help mode (logged at info level):
Input help: gesture kb(desktop):NVDA+t, bound to script title on globalCommands.GlobalCommands`</li>
</ul>
<p>You may want to open the file containing this code to understand the context
of the traceback or the logged message. Just press C to open this file.</p>
<p>For this feature to work, you need to have configured your <a href="http://addons.nvda-project.org/index.hu.html#settingsOpenCommand">favorite
editor's command</a> in the add-on's settings. If you
are not running NVDA from source, the <a href="http://addons.nvda-project.org/index.hu.html#settingsNvdaSourcePath">location of NVDA source
code</a> should also have been configured.</p>
<p><a id="oldLogsBackup"></a></p>
<h2>Backup of old logs</h2>
<p>NVDA already provides a backup of the log of the previous session of NVDA;
the file is called <code>nvda-old.log</code>. Sometimes however you may want to access
older logs, e.g. because you have had to restart NVDA again before looking
at <code>nvda-old.log</code>. This add-on allows you to configure if you want to
backup old logs and how many of them; this is done in the <a href="http://addons.nvda-project.org/index.hu.html#settingsLogsBackup">add-on's
settings</a>.</p>
<p>A log manager dialog allows to view the backed up logs.
It can be opened going to NVDA menu -> Tools -> Logs manager
In this dialog, you can see the list of all the backup logs, open or delete them.
To be able to open a log, you should first have configured the <a href="http://addons.nvda-project.org/index.hu.html#settingsOpenCommand">Command to open a file in your favorite editor</a>.</p>
<h2>Python console extension</h2>
<p><a id="pythonConsoleOpenCodeFile"></a></p>
<h3><code>openCodeFile</code> function</h3>
<p>In the console, you can call the following function to view the source code that defines the variable <code>myVar</code>:<br />
<code>openCodeFile(myVar)</code></p>
<p>For this feature to work, you need to have configured your <a href="http://addons.nvda-project.org/index.hu.html#settingsOpenCommand">favorite
editor's command</a> in the add-on's settings. If you
are not running NVDA from source, the <a href="http://addons.nvda-project.org/index.hu.html#settingsNvdaSourcePath">location of NVDA source
code</a> should also have been configured.</p>
<p>The <code>openCodeFile</code> functions can be called on objects defined in NVDA's code
or on objects defined by add-ons. It cannot be called on objects whose
source code is not available such as python builtins.</p>
<p>If you have not yet imported the object in the console, you can also pass
its name as parameter to the <code>openCodeFile</code> function.</p>
<p>Below are examples of call in NVDA's code:</p>
<ul>
<li>View the definition of the function <code>speech.speech.speak</code>:
<code>openCodeFile(speech.speech.speak)</code><br />
or with the name passed as parameter:<br />
<code>openCodeFile("speech.speech.speak")</code></li>
<li>View the definition of the class <code>TextInfo</code>:
<code>openCodeFile(textInfos.TextInfo)</code></li>
<li>View the definition of the method <code>copyToClipboard</code> of the class
<code>TextInfo</code>:
<code>openCodeFile(textInfos.TextInfo.copyToClipboard)</code></li>
<li>View the definition of the class of the focused object:
<code>openCodeFile(focus)</code></li>
<li>Open the file <code>api.py</code> defining the module <code>api</code>:
<code>openCodeFile(api)</code></li>
</ul>
<h3>Python console startup script</h3>
<p>You can define a custom script which will be executed in the Python
console's namespace when it is first opened, or if the add-on is reloaded
(NVDA+F3) after the console has already been opened.</p>
<p>For example, the script allows you to execute new imports and define aliases that you will be able to use directly in the console, as shown below:</p>
<pre><code># Various import that I want in the console.
import globalVars as gv
import core
import ui
# Aliases
ocf = openCodeFile
</code></pre>
<p>The Python console script should be placed in the following location: <code>pathToNVDAConfig\ndtt\consoleStartup.py</code><br />
For example:
<code>C:\Users\myUserName\AppData\Roaming\nvda\ndtt\consoleStartup.py</code></p>
<h2>Log the stack trace of the speech function</h2>
<p>Sometimes, you may want to see which part of the code is responsible for
speaking something. For this, you can enable the stack trace logging of the
speech function pressing NVDA+control+alt+S. Each time NVDA speaks, a
corresponding stack trace will be logged in the log.</p>
<p>Note: You may modify the script's file directly to patch another function.
See all instructions in the file for details on usage.</p>
<p><a id="settings"></a></p>
<h2>Settings</h2>
<p>Some features of the add-on may require a specific configuration.
A settings panel allows to enable them or to control how they work.
To view and modify these settings, go to NVDA menu -> Preferences and select the category NVDA Dev & Test Toolbox.
This settings dialog can also be accessed directly from the Logs Manager dialog.</p>
<p>These settings are global and can only be configured when the default
profile is active.</p>
<p><a id="settingsOpenCommand"></a></p>
<h3>Command to open a file in your favorite editor</h3>
<p>Some features allow to see content in your favorite editor. This includes
the commands to view the source file <a href="http://addons.nvda-project.org/index.hu.html#logReaderOpenSourceFile">from a log</a>
or <a href="http://addons.nvda-project.org/index.hu.html#pythonConsoleOpenCodeFile">from an object in the console</a> as well as
the <a href="http://addons.nvda-project.org/index.hu.html#oldLogsBackup">log manager</a>'s Open button.</p>
<p>To use them, you first need to configure the command that will be called to open the file in your favorite editor.
The command should be of the form:<br />
<code>"C:\path\to\my\editor\editor.exe" "{path}":{line}</code><br />
You should of course modify this line according to the real name and location of your editor and the syntax used by it to open files.
<code>{path}</code> will be replaced by the full path of the file to open and <code>{line}</code> by the line number where you want the cursor to be set.
For Notepad++ for example the command to type in the console would be:<br />
<code>"C:\Program Files\Notepad++\notepad++.exe" "{path}" -n{line}</code></p>
<p><a id="settingsNvdaSourcePath"></a></p>
<h3>NVDA source code path</h3>
<p>When using a command to <a href="http://addons.nvda-project.org/index.hu.html#logReaderOpenSourceFile">view the source file from a log</a> or <a href="http://addons.nvda-project.org/index.hu.html#pythonConsoleOpenCodeFile">from an object in the console</a>, the file may belong to NVDA itself.
If you are not running NVDA from source, your NVDA only contains compiled files.
Thus you may specify here an alternate location where the corresponding source file will be found, e.g. the place where you have cloned NVDA source files, so that a source file can be opened anyway.
The path should be such as:<br />
<code>C:\pathExample\GIT\nvda\source</code><br />
Of course, replace the path of NVDA source with the correct one.</p>
<p>Be sure however that the version of your source file (e.g. GIT commit) is
the same as the one of the running instance of NVDA.</p>
<p><a id="settingsLogsBackup"></a></p>
<h3>Backup of old logs</h3>
<p>The combobox Backup of old logs allows to enable or disable the
<a href="http://addons.nvda-project.org/index.hu.html#oldLogsBackup">feature</a>. If it is enabled, you can also specify below in
"Limit the number of backups" the maximum number of backups you want to
keep. These settings only take effect at next NVDA startup when the backup
takes place.</p>
<h2>Change log</h2>
<h3>Version 6.2</h3>
<ul>
<li>Restores console opening for NVDA < 2021.1.</li>
<li>Addresses potential security issues related to <a>GHSA-xg6w-23rw-39r8</a>
when using the add-on with older versions of NVDA. However, it is
recommended to use NVDA 2023.3.3 or higher.</li>
</ul>
<h3>Version 6.1</h3>
<ul>
<li>Opening the source file of an object located in the submodule of a package
is now working.</li>
<li>Bugfix: The enhanced exit dialog can now be reopened and used as expected
after having been closed. (contribution from Łukasz Golonka)</li>
</ul>
<h3>Version 6.0</h3>
<ul>
<li>While using object navigation commands, a specific object property can be
reported instead of NVDA usual object reporting.</li>
<li>In log reading mode, the "C" key to open a code file from the log now also
works on an input help message.</li>
<li>Bugfix: The add-on can now start successfully when the number of logs to
save is set to its maximum value.</li>
<li>Bugfix: Python console startup script's output does not prevent anymore to
jump to the first result in the console when using result navigation
commands.</li>
<li>Note: From now on, localization updates will not appear anymore in the
change log.</li>
</ul>
<h3>Version 5.0</h3>
<ul>
<li>If Instant Translate add-on is installed, it is now possible to have
speech messages translated on the fly when using log reading commands.</li>
<li>While in log reading mode, pressing E or shift+E now jumps to CRITICAL
erorr messages as well as normal ERROR messages.</li>
<li>New log quick navigation commands have been added to jump to input and to
speech messages.</li>
<li>A new command allow to place a marker in the log; and specific quick
navigation commands in log reading mode allow to jump to them. Credit: the
initial idea for this feature comes from Debug Helper add-on by Luke
Davis.</li>
<li>Bubfix: The memorization of the last error do not fail anymore in some
cases.</li>
<li>Bugfix: The add-on can initialize again with NVDA 2019.2.1.</li>
<li>Bugfix: Log saving feature will not fail anymore with non-ASCII logs.</li>
</ul>
<h3>Version 4.2</h3>
<ul>
<li>Fixed an error with NVDA version below 2021.3.</li>
<li>Fixed the stack trace log formatting.</li>
<li>First localizations.</li>
</ul>
<h3>Version 4.1</h3>
<ul>
<li>Fixed a bug occurring in some situations while logging an error.</li>
<li>The add-on's settings can now be modified only when the default profile is
active to avoid config issues.</li>
</ul>
<h3>Version 4.0</h3>
<ul>
<li>Possibility to back up old logs and introduction of a logs manager.</li>
<li>Added a script to report the last logged error.</li>
<li>Fixed a bug preventing last log message to be read in older NVDA versions.</li>
</ul>
<h3>Version 3.2</h3>
<ul>
<li>Compatibility with NVDA 2023.1.</li>
</ul>
<h3>Version 3.1</h3>
<ul>
<li>Fixed an error occurring when requesting unavailable information on an
object.</li>
</ul>
<h3>Version 3.0</h3>
<ul>
<li>In a log, you can now press C on a message's header line to open the
function/module which has emitted it.</li>
<li>In the console, <code>openCodeFile</code> function can now receive as parameter the
object or a string containing its name.</li>
<li>New feature: NVDA console startup file: If it exists, the file
YourNVDAConfigFolder\ndtt\consoleStartup.py will be executed when NVDA
console is first opened or when add-ons are reloaded.</li>
<li>Various minor fixes for <code>openCodeFile</code> Python console's function and the
command to open the source file corresponding to a line in the log.</li>
<li>Fixed an issue when trying to report roles/states for object explorer in
older version of NVDA.</li>
<li>The add-on does not cause a problem anymore with the tree interceptor when
using UIA in Edge.</li>
</ul>
<h3>Version 2.1</h3>
<ul>
<li>Various bugfixes and code refactoring/cleaning to address all use cases:
all supported versions, installed vs. run from source, etc. (contribution
from Łukasz Golonka)</li>
<li>Rewriting of the compa module (contribution from Łukasz Golonka)</li>
<li>The restart dialog can now be opened only once.</li>
<li>The object explorer shortcuts are now unassigned by default and need to be
mapped by the user.</li>
<li>With the object explorer, a double-press to call the script to report the
current object's property now displays the reported information in a
browseable message.</li>
</ul>
<h3>Version 2.0</h3>
<ul>
<li>New feature: Enhanced restart dialog to specify some extra options when
restarting NVDA.</li>
<li>New feature: extended description mode.</li>
<li>Play error sound feature harmonized between pre and post 2021.3 versions
of NVDA.</li>
<li>New feature: Log reader commands are now available in the log viewer and
also optionally in edit fields or webpages.</li>
<li>New feature: In the Python console, an <code>openCodeFile</code> function is
available to view the source code of an object.</li>
<li>Some features are now disabled in secure mode for security reasons.</li>
<li>The add-on's compatibility range has been extended (from 2019.2 to
2021.1).</li>
<li>Releases are now performed with GitHub action instead of appVeyor.</li>
</ul>
<h3>Version 1.0</h3>
<ul>
<li>Initial release.</li>
</ul>
<p>https://www.nvaccess.org/files/nvda/documentation/userGuide.html#CommandLineOptions</p>
<p>https://www.nvaccess.org/files/nvda/documentation/userGuide.html#PlayErrorSound</p>
<p>https://github.com/nvaccess/nvda/security/advisories/GHSA-xg6w-23rw-39r8#event-132994</p>
TesseractOCR: An OCR add-onhttp://addons.nvda-project.org/addons/tesseractOCR.hu.html2024-02-13T14:38:18Z2023-05-12T09:37:38Z
<ul>
<li>Authors: Rui Fontes, Ângelo Abrantes and Abel Passos do Nascimento Jr.</li>
<li>Updated in 04/05/2023</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=tesseractOCR">stable version</a></li>
<li>Compatibility: NVDA version 2019.3 and beyond</li>
</ul>
<h2>Information</h2>
<p>This add-on uses the free and open source Tesseract OCR engine, to perform
optical character recognition on an image file, PDF, JPG, TIF or other,
without the need to open it.</p>
<p>It also allows access to WIA enabled scanners to perform OCR to a paper
document.</p>
<p>In the NVDA menu, Preferences, a TesseractOCR section is added, where you
can configure the following:</p>
<ul>
<li>languages to be used in recognition;</li>
<li>the type of documents to be recognized;</li>
<li>if should be asked or not a PDF password. If you have this option checked,
and the PDF does not have a password, just press Enter in the dialog
asking for password;</li>
<li>Select the scanner to be used;</li>
<li>set the scanner resolution between 150 and 400 dpi.</li>
</ul>
<p>With the exception of English and Portuguese, which are already included in
add-on, the other languages will be downloaded and installed when you select
a language that does not already exist in the add-on.</p>
<p>Note that as the number of selected recognition languages increases, the OCR
process will take longer.</p>
<p>We therefore recommend that you use only the languages you need.</p>
<p>Note also that the quality of recognition may vary according to the order of
languages.</p>
<p>Therefore, if the recognition result is not satisfactory, you may want to
try another language ordering.</p>
<h2>Shortcut</h2>
<p>The default commands are:</p>
<ul>
<li>Windows+Control+r - to recognize the selected document;</li>
<li>Windows+Control+w - to scan and recognize a document through the scanner;</li>
<li>Windows+Control+c - To cancel the scanning process.</li>
</ul>
<p>Please note: It must be issued before the dialog asking if you want to scan
more pages appear!</p>
<p>Then just wait the browseable message appears with the recognized text.</p>
<p>If you want to preserve the recognized text, don't forget to save it in some
folder, as the results are deleted at the start of the next OCR process!</p>
<p>This commands can be modified in the "Input gestures" dialog in the
"TesseractOCR" section.</p>
<h2>Known problems</h2>
<p>When selecting the "Various" option in the "Documents type" combobox, the
recognized text probably appear with many blank lines</p>
<p>This is a known problem with Tesseract, and, without consumming lots of
processing time, I haven't yet found any solution. But, I still haven't
given up!</p>
<h2>Languages supported</h2>
<p>The supported languages in this version are:</p>
<ul>
<li>Afrikans</li>
<li>Albanian</li>
<li>Amharik</li>
<li>Arabic</li>
<li>Armenian</li>
<li>Assamese</li>
<li>Azerbaijani (Latin)</li>
<li>Basque</li>
<li>Belarusian</li>
<li>Bengali</li>
<li>Bosnian</li>
<li>Breton</li>
<li>Bulgarian</li>
<li>Burnese</li>
<li>Catalan/Valencian</li>
<li>Cebuano</li>
<li>Cherokee</li>
<li>Chinese simplified</li>
<li>Chinese traditional</li>
<li>Corsican</li>
<li>Croatian</li>
<li>Czech</li>
<li>Dannish</li>
<li>Deutch</li>
<li>Dhivehi</li>
<li>Dutch (Flemish)</li>
<li>Dzongkha</li>
<li>English</li>
<li>Esperanto</li>
<li>Estonian</li>
<li>Faroese</li>
<li>Filipino</li>
<li>Finnish</li>
<li>French</li>
<li>Galician</li>
<li>Georgian</li>
<li>Greek</li>
<li>Gujarati</li>
<li>Haitian</li>
<li>Hebrew</li>
<li>Hindi</li>
<li>Hungarian</li>
<li>Icelandic</li>
<li>Indonesian</li>
<li>Inuktitut</li>
<li>Irish</li>
<li>Italian</li>
<li>Javanese</li>
<li>Japanese</li>
<li>Kannada</li>
<li>Kazakh</li>
<li>Khmer (Central)</li>
<li>Kirghiz</li>
<li>Korean</li>
<li>Kurdish Kurmanji</li>
<li>Lao</li>
<li>Latin</li>
<li>Lativia</li>
<li>Lituanian</li>
<li>Luxembourgish</li>
<li>Macedonian</li>
<li>Malay</li>
<li>Malayalam</li>
<li>Maltese</li>
<li>Maori</li>
<li>Marathi</li>
<li>Math / equation detection module</li>
<li>Mongolian</li>
<li>Nepali</li>
<li>Norwegian</li>
<li>Occitan</li>
<li>Oriya</li>
<li>Panjabi</li>
<li>Pashto</li>
<li>Persian</li>
<li>Polish</li>
<li>Portuguese</li>
<li>Quechua</li>
<li>Romanian/Moldave</li>
<li>Russian</li>
<li>Sanskrit</li>
<li>Scottish Gaelic</li>
<li>Serbian (Latin)</li>
<li>Slovak)</li>
<li>Slovenian)</li>
<li>Sindhi</li>
<li>Sinhalese</li>
<li>Spanish</li>
<li>Sundanese</li>
<li>Swahili</li>
<li>Swedish</li>
<li>Syriac</li>
<li>Tajik</li>
<li>Tamil</li>
<li>Tatar</li>
<li>Telugu</li>
<li>Thai</li>
<li>Tibetan</li>
<li>Tigrinya</li>
<li>Tonga</li>
<li>Turkish</li>
<li>Uighur</li>
<li>Ukrainian</li>
<li>Urdu</li>
<li>Uzbek (Latin)</li>
<li>Vietnamese</li>
<li>Welsh</li>
<li>West Frisian</li>
<li>Yiddish</li>
<li>Yoruba</li>
</ul>
<h2>Image types supported</h2>
<p>This add-on supports the following types of files:</p>
<ul>
<li>PDF</li>
<li>jpg</li>
<li>tif</li>
<li>png</li>
<li>bmp</li>
<li>pnm</li>
<li>pbm</li>
<li>pgm</li>
<li>jp2</li>
<li>gif</li>
<li>jfif</li>
<li>jpeg</li>
<li>tiff</li>
<li>spix</li>
<li>webp</li>
</ul>
UnigramPlushttp://addons.nvda-project.org/addons/unigramPlus.hu.html2024-02-13T14:35:58Z2023-05-10T21:27:46Z
<ul>
<li>Author: Kostya Gladkiy (Ukrain)</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=unigramPlus">stable version</a> (Compatible with NVDA 2021.2 to 2023.1)</li>
<li><a href="https://t.me/unigramPlus">Telegram channel</a></li>
<li><a href="https://unigramplus.diaka.ua/donate">Donation link</a></li>
<li>PayPal: gladkiy.kostya@gmail.com</li>
</ul>
<h2>about</h2>
<p>Use Unigram in a more comfortable and productive way. This addon provides
many hotkeys for a quick and comfortable use of Unigram and makes a lot of
small improvements.</p>
<h2>Some of the major improvements are:</h2>
<ul>
<li>Adds a significant improvement to the display of messages such as a poll,
a link, or a message with attached media.</li>
<li>When focus enters the list of chats, it removes such phrases as: "chats,
tab, selected list". And when the focus hits the list of messages, the
phrase "list".</li>
<li>The name and size of the file will be spoken when the cursor is focused on
the "Open File" button or the "Download File" button, and when the cursor
is focused on the play button of the audio file, you will hear its name
and duration.</li>
<li>When focus is placed on a voice message that is currently being played,
first information about the time of its playback is announced, and then
all other information.</li>
<li>When the focus is on a message that contains information about a call, the
duration of this call is announced.</li>
<li>When focusing on a selected message in a chat, you will first hear the
information that it is selected, and then the content of the message.</li>
<li>Now, when moving in the chat, the phrase "Seen" will not be pronounced at
all, and the phrase "Not seen" will be pronounced before the content of
the message. This feature currently only works in English, Russian,
Ukrainian, Spanish, Portuguese, Polish, Croatian, Turkish, and Persian.</li>
<li>Significantly improved the function of recording voice
messages. Recording, sending and canceling the recording of a voice
message are accompanied by characteristic sounds.</li>
<li>Also, when performing these functions, the focus remains in its position
and does not jump to either the record button or the message input field.</li>
<li>If the media attached to the message is opened using the spacebar, then
after closing it, the focus will return to the last element that was in
focus.</li>
<li>The add-on allows you to completely disable the announcement of progress
bars, as well as disable only the announcement of the progress bar for
playing voice messages.</li>
</ul>
<h2>Information about the opportunity to donate to the developer:</h2>
<p>If you really like this add-on and you have the desire, and most importantly
the opportunity, to financially support the developer and thereby motivate
him to further develop this add-on, you can do this by transferring a small
amount to the following bank details: <a href="https://unigramplus.diaka.ua/donate">donation link</a>, or card number is
5169360009004502(Ukraine).</p>
<p>And remember that everyone who read this line thought that someone will
definitely support the developer, but it will not be me.</p>
<h2>Hotkey list:</h2>
<ul>
<li>ALT+1: Move focus to chat list;</li>
<li>ALT+2: Move focus to the last message in an open chat;</li>
<li>ALT+3: Move focus to "unread messages" label;</li>
<li>ALT+D: Move the focus to the edit field. If the focus is already in the
edit field, then after pressing the hotkey, it will move to where it was
before;</li>
<li>ALT+T: Announce the name and status of an open chat;</li>
<li>space: Play/stop the focused voice or video message, or open a media file
attached to the current message;</li>
<li>ALT+P: Play/pause the voice message currently playing;</li>
<li>ALT+S: Increase/decrease the playback speed of voice messages;</li>
<li>ALT+E: Close audio player;</li>
<li>control+C: Copy the message if it contains text. If the focus is on a
link, the link will be copied;</li>
<li>ALT+shift+C: Call if it's a contact, or enter a voice chat if it's a
group;</li>
<li>ALT+shift+V: Press the video call button;</li>
<li>ALT+Y: Accept call;</li>
<li>ALT+N: Press the \"Decline call\" button if there is an incoming call, the
\"End call\" button if the call is in progress, or leave the voice chat if
it is active;</li>
<li>ALT+A: Press \"Mute/unmute microphone\" button;</li>
<li>ALT+C: Press "Enable/disable camera" button;</li>
<li>ALT+Q: Press \"Instant view\" button, if it is included in the current
message;</li>
<li>ALT+O: Press "More Options" button in an open chat, voice chat, or call
window;</li>
<li>ALT+M: Open navigation menu;</li>
<li>control+R: Start/stop voice message recording;</li>
<li>control+D: If pressed once, cancels the recording of a voice message. If
pressed twice, changes the notification type when starting, sending, or
canceling a voice message recording;</li>
<li>ALT+U: Toggle progress bar announcements;</li>
<li>control+P: Open current chat profile;</li>
<li>delete: Delete a message or chat;</li>
<li>shift+delete: Delete message or chat from both sides;</li>
<li>control+ALT+C: Open comments;</li>
<li>Unassigned: Reply to message;</li>
<li>ALT+F: Forward message;</li>
<li>Unassigned: Edit message;</li>
<li>ALT+shift+R: Mark a chat as read;</li>
<li>control+space: Switch to selection mode;</li>
<li>control+shift+C: Copy messages with formatting preserved;</li>
<li>ALT+shift+L: Copy data for broadcasting to the clipboard;</li>
<li>control+ALT+right arrow: Fast forward a voice message.</li>
<li>control+ALT+left arrow: Rewind voice message.</li>
<li>ALT+C: Show message text in popup window.</li>
<li>NVDA+control+U: Open UnigramPlus settings window</li>
<li>ALT+4: Move focus to list of chat folders.</li>
<li>control+shift+A: Press "Attach file" button.</li>
<li>control+N: Press "New chat" button.</li>
<li>Unassigned: Pin a message or chat.</li>
<li>ALT+5: Move focus to open profile.</li>
<li>ALT+L: Enable automatic reading of new messages in the current chat.</li>
<li>NVDA+ALT+R: Convert voice message to text.</li>
<li>Left arrow: Announce the original message, the message that was replied
to.</li>
<li>ALT+6: Move focus to the list of group threads.</li>
<li>ALT+H: Show a list of all UnigramPlus keyboard shortcuts.</li>
</ul>
<h3>Note</h3>
<ul>
<li>All hotkeys can be reassigned in NVDA menu, preferences, input gestures.</li>
<li>The fact that the function that focuses the cursor on the "unread message"
label can sometimes react with a delay is a known issue. This may depend
on the number of cash messages at the moment.</li>
</ul>
<h2>List of changes:</h2>
<h3>Version 4.9.0</h3>
<ul>
<li>Added an option to change the behavior when pressing the up arrow in an
empty message edit field. You can choose from the following options:
activate the function of editing the last sent message, move the focus to
the last message in the chat or do nothing.</li>
<li>Fixed answering and rejecting calls using hotkeys.</li>
<li>Fixed minor issues such as the ALT+H key combination not working And an
issue when the message to which the reply was written was not spoken when
pressing the left arrow.</li>
<li>Fixed display of some elements.</li>
</ul>
<h3>Version 4.8.3</h3>
<p>Fixed an issue that caused the keyboard shortcut to open the navigation menu
to not work.</p>
<h3>Version 4.8.1</h3>
<ul>
<li>UnigramPlus has been adapted to be compatible with the NVDA add-on store
format.</li>
<li>Minor fixes in the English documentation.</li>
</ul>
<h3>Version 4.8.0</h3>
<ul>
<li>Now in the Unigram settings, the settings categories can be opened by
pressing Enter. When you open any category of settings, the focus will be
placed on that category.</li>
<li>Now, when clicking the "Explanation" button in quizzes, the explanation
text will open in a separate window for convenient viewing.</li>
<li>Fixed an issue where chat folder names were not spoken when switching
between them.</li>
<li>Fixed a bug that made it impossible to disable or change the order of
speaking the chat type and name.</li>
<li>Fixed the issue when it was not possible to find out the correct answer in
quizzes.</li>
<li>Fixed the problem with copying a message using the control+shift+C
combination.</li>
<li>Made several minor fixes, improvements, and code optimizations.</li>
</ul>
<h3>Version 4.7.0</h3>
<ul>
<li>UnigramPlus is now adapted to the latest version of Unigram.</li>
<li>Compatibility with NVDA-2023 is now ensured.</li>
<li>The keyboard shortcut ALT+1 now moves focus not only to the chat list, but
also to the contact list and settings section list.</li>
<li>The automatic announcement of new messages in chat, as well as the
announcement of chat actions, have been significantly redesigned,
resulting in improved stability.</li>
<li>A keyboard shortcut has been added to display all UnigramPlus commands. By
default, this function is assigned to ALT+H.</li>
<li>Several minor issues have also been fixed.</li>
</ul>
<h3>Version 4.6.0</h3>
<ul>
<li>Added a keyboard shortcut to move focus to list of group threads. By
default, this function is assigned to the ALT+6 combination. Please note
that often when pressing the enter key on the group that we want to open,
the list of threads may not be displayed and then it is necessary to set
the focus on this group again and press the enter key. As a rule, after
the second press, a list of threads is displayed, and after that we can
press a key combination that will move the focus to this list.</li>
<li>Now the ALT+2 combination moves the focus not only to the list with
messages, but also to the open profile, to the open list of group threads,
or to the open section with settings.</li>
<li>Now in the UnigramPlus settings, you can disable the pronunciation of the
phrases "Admin" and "Owner" on messages in groups.</li>
<li>Hotkeys for accepting and declining calls now work correctly.</li>
<li>Now the automatic announcement feature for new messages and the chat
activity will not turn off when NVDA is restarted, but will work until you
turn it off yourself.</li>
<li>Improved display of some interface elements.</li>
</ul>
<h3>Version 4.5.0</h3>
<ul>
<li>Adapted to the latest version of Unigram</li>
<li>Now if a message was sent in response to another message, by pressing the
left arrow key, you can hear the text of the message in response to which
it was sent</li>
<li>Added French localization</li>
<li>Removed the ability to add reactions to messages with keyboard shortcuts,
since I was unable to adapt this function to changes in the Unigram
interface</li>
<li>Fixed some minor bugs</li>
</ul>
<h3>Version 4.4.0</h3>
<ul>
<li>The function of announcing activity in chats has been added. By default,
this function is activated by double-pressing the ALT+T combination. The
function remains active only until NVDA is restarted.</li>
<li>The function of automatic announcements of new messages in the chat has
been added. By default, this function is activated by pressing ALT+L. The
feature remains active only until NVDA is restarted. There may be
stability issues if too many new messages quicly appear in the chat.</li>
<li>Added a keyboard shortcut for the function of converting voice messages to
text. By default, this function is assigned to the NVDA+ALT+R
combination. Please note that in cases where the voice message is very
long, then the conversion to text takes place in parts. That is, it may
happen that when Unigramplus notifies you that the conversion is complete,
only part of the voice message will actually be converted. And after a few
seconds, this text will be added.</li>
<li>Now, when navigating through the chat list, UnigramPlus reports
information about premium accounts and verified accounts.</li>
</ul>
<h3>Version 4.3.0</h3>
<ul>
<li>Now UnigramPlus works correctly when several chats are open in different
windows.</li>
<li>Added keyboard shortcut to move focus to user profile area if it is
open. The default gesture is alt+5.</li>
<li>Fixed minor bugs.</li>
</ul>
<h3>Version 4.4.0</h3>
<ul>
<li>The mechanism for saving UnigramPlus settings has been significantly
redesigned. Now the settings will not be stored in the NVDA config file,
but will be stored in its own config file. This should solve the problem
when users after an update or just suddenly UnigramPlus stopped working,
due to problems accessing the NVDA config file. Unfortunately, users will
have to re-configure UnigramPlus for themselves, as after installing this
update, all settings will be reset.</li>
<li>Fixed UnigramPlus compatibility issue with BluetoothAudio add-on.</li>
<li>Now the information that the message is not selected will not be
reported. If a message is selected, information about it will be announced
before the message content.</li>
<li>Now the order number of the elements in the chat will be announced if you
have enabled the element position in the NVDA settings.</li>
<li>Added labels to some buttons.</li>
</ul>
<h3>Version 4.1.0</h3>
<ul>
<li>Added a gesture to pin a message or chat. By default, no keyboard shortcut
are assigned to this feature.</li>
<li>Added a keyboard shortcut for pressing the "New conversation" button. The
default gesture for this feature is ctrl+n.</li>
<li>Added a keyboard shortcut for pressing the "Attach media" button. The
default gesture is ctrl+shift+a.</li>
<li>Added a keyboard shortcut to go to the list of chat folders. The default
gesture is alt+4. This feature will be useful for those who use more than
nine chat folders.</li>
<li>Now, when switching between folders using the arrows, the focus will not
jump anywhere.</li>
<li>Now, when switching between folders using hotkeys, in addition to the name
of the active folder, the number of unread chats in this folder will be
announced.</li>
<li>Now features such as "Mark a chat as read" and "Pin a message or chat"
will also work in reverse.</li>
<li>Added Romanian localization.</li>
</ul>
<h3>Version 4.0.0</h3>
<ul>
<li>Provided compatibility with Unigram 8.8. Since the Unigram interface has
changed, I had to rewrite a significant part of the addon code.</li>
<li>Added the ability to rewind and fast forward voice messages. To fast
forward, use the combination control+right arrow, and to rewind, use
control+left arrow.</li>
<li>Now UnigramPlus will report not only the presence of reactions in
messages, but also announce detailed information about reactions.</li>
<li>Added the ability to view the text of the message in the popup window. The
default gesture for this feature is ALT+C.</li>
<li>Added keyboard shortcut to open UnigramPlus settings window. The default
gesture for this feature is NVDA+control+U</li>
<li>Added Czech and Romanian localizations.</li>
<li>Fixed issue with UnigramPlus update for Ukrainian residents.</li>
</ul>
<h3>Version 3.2.3</h3>
<ul>
<li>Added Chinese localization.</li>
<li>Updated existing localizations, including English.</li>
<li>Fixed minor bugs.</li>
</ul>
<h3>Version 3.2.0</h3>
<ul>
<li>Removed features such as "Chat activity tracking" and "Read new messages
in open chat" because I was unable to get them to work properly in NVDA
2022.1.</li>
<li>Improved accessibility of mute / unmute and turn on / off camera in
calls. Now, after pressing the shortcut for both functions, their status
will be announced.</li>
<li>Fixed an issue where the Enter key was not working properly on some
elements. Now you can still record voice messages by holding the Enter key
on the record button.</li>
<li>You can now reassign keyboard shortcuts to features such as "Reply to
message" and "Edit message". You can also assign these functions to keys
such as Enter, Backspace or even left or right arrows, and it won't
interfere with those keys on other items. Note that no keys will be
assigned to these features at first, but you will only be able to assign
them when the focus is on one of the chat messages.</li>
<li>Now the function "Say the sender's name" should work more correctly.</li>
<li>When you focus on a link contained in a message, the message text will not
be spoken first, but the link text will be spoken immediately.</li>
<li>made many small improvements and fixed many bugs and shortcomings.</li>
<li>Now UnigramPlus should run noticeably faster.</li>
</ul>
<h3>Version 3.1.0</h3>
<ul>
<li>Poll announcement has been improved. The names of users who have taken
surveys are now announced in the results window. Polls will also provide
information on which option was correct.</li>
<li>The ability to react to messages has been added, but only in private
chats. This feature will not work properly in groups and channels. In
private chats, by pressing NVD + ALT + numbers from 1 to 5, you can type
the following reactions: 1 - 👍, 2 - 👎, 3 - ❤, 4 - 🔥, 5 - 🥰.</li>
<li>Added the ability to announce information about existing replies to
messages. Unfortunately, it is not yet possible to announce the name of
the available reactions.</li>
<li>Added hotkey to quickly copy data needed for broadcasts.</li>
<li>Fixed an issue with displaying inline results that appeared in the latest
versions of Unigram.</li>
</ul>
<h3>Version 3.0.0</h3>
<p>Warning! UnigramPlus will now support NVDA versions no older than 21.2.0. *
Added labels for many UI elements. * Fixed some bugs.</p>
<h3>Version 2.9.0</h3>
<ul>
<li>Now the edit field will change its label depending on whether we are
replying to the message or editing it.</li>
<li>Added the ability to enable a confirmation dialog for deleting messages or
chats using hotkeys in the settings.</li>
<li>Added Serbian localization.</li>
<li>Fixed small issues.</li>
</ul>
<h3>Version 2.8.0</h3>
<ul>
<li>Added the ability to update the add-on from within the add-on. Now, in
order to check for updates and install them, just open the UnigramPlus
settings and click the appropriate button. You can also enable automatic
check for updates on NVDA startup.</li>
<li>Added Arabic localization.</li>
</ul>
<h3>Version 2.7.0</h3>
<ul>
<li>You will now be notified that the message has been forwarded.</li>
<li>Improved message copy function. Now, if the text contains a clickable link
and the focus is on that link, pressing CTRL+C will copy the link instead
of the entire text.</li>
<li>Added hotkey for copying messages while maintaining text formatting. This
function emulates the activation of the corresponding item in the
application menu. The default hotkey for this feature is
CTRL+shift+C. Because of this feature, the hotkey for opening comments has
been changed to CTRL+ALT+C.</li>
<li>Added the ability to automatically announce new messages in open chat. By
default, it can be enabled by pressing ALT + L.</li>
<li>Added hotkeys for quick viewing of chat messages. Press NVDA + CTRL + the
number corresponding to the number of a particular message in reverse
order, that is, if you want to view the last message, press 1, if you want
to view the previous message, press 2, etc.</li>
<li>Now pressing ALT+T will give you information about the active voice chat
in the current group.</li>
</ul>
<h3>Version 2.6.0</h3>
<ul>
<li>Provided compatibility with NVDA 21.3.</li>
<li>Added hotkey to enable selecting messages or chats.</li>
<li>Added hotkey for forwarding messages.</li>
<li>Added hotkey for marking a chat as read.</li>
<li>Improved performance of the existing features.</li>
</ul>
<h3>Version 2.5.0</h3>
<ul>
<li>There is now a checkbox that, if checked, fixes the voice message
recording issue that some users are experiencing.</li>
<li>Added a hotkey for replying to a message. You can do it by pressing Enter
on the message or you can reassign the alternative hotkeys for this
feature to something else.</li>
<li>Added hotkey for editing messages. The default keyboard shortcut is
ALT+Backspace.</li>
</ul>
<h3>Version 2.4.0</h3>
<ul>
<li>You will now hear the sender's name when focusing on a message.</li>
<li>When focusing on a group chat that contains unread messages, you will be
notified if there are replies for you in that group.</li>
<li>The performance of features added in the previous update has also been
improved.</li>
</ul>
<h3>Version 2.3.0</h3>
<ul>
<li>Improved accessibility of messages containing multiple media
attachments. Previously, the caption of a message containing more than one
media attachment could only be accessed using object navigation. Now this
caption will be read immediately after focusing on such a message.</li>
<li>Improved accessibility of messages containing polls. Now when you focus on
such a message, you will hear the number of people who have already voted,
as well as all the answer options with the result for each option.</li>
<li>Improved accessibility of messages containing URLs. Now, if the URL has a
description, it will also be read, i.e., for example, if the message has a
URL for YouTube, the title and description for that video will be read
right after the URL itself. Also, if the URL is longer than 30 characters,
it will be shortened to make the following description easier to read.</li>
<li>Improved accessibility of the inline query results panel.. To navigate
through the results of inline queries, use the following combinations:
control+up and control+down.</li>
<li>Added hotkey to open comments.</li>
</ul>
<h3>Version 2.2.0</h3>
<ul>
<li>Added hotkey to delete messages or chats just for you and also on both
sides. This function is related to the Unigram interface language, so it
may not work in some localizations. In the settings you can choose the
type of notifications, text or sound.</li>
<li>Added the ability to specify which interface language you use in Unigram
in settings. This is necessary for the correct operation of functions
associated with certain localizations.</li>
<li>Added hotkey to open current chat profile.</li>
<li>Now, after closing a chat, the focus will move to the list of chats, and
not to the button "Open navigation menu".</li>
</ul>
<h3>Version 2.1.0</h3>
<ul>
<li>When switching between folders in the chat list, the name of the current
folder will be announced.</li>
<li>In the chat list, you hear the name of the chat, followed by its type.</li>
<li>Improved the function of moving focus to the list of chats. Now it should
work more accurately and without delays.</li>
<li>Now the add-on settings have become even more flexible, because a section
with some UnigramPlus options has appeared in the NVDA Preferences menu.</li>
<li>Added Polish localization.</li>
<li>Many small fixes and improvements.</li>
</ul>
<h3>Version 2.0.0</h3>
<ul>
<li>The feature where the word "Seen" is not announced and the word "Not seen"
is spoken before the message content is read now works in Spanish,
Portuguese, Croatian, Turkish and Persian localizations.</li>
<li>Improved the function of progress bar announcements. Now, when this mode
is enabled, not all progress indicators are announced, but only those that
are in focus.</li>
<li>If you press the spacebar in a message that contains a file that has not
completed downloading, you will be notified that the download has been
paused.</li>
<li>Added Portuguese localization.</li>
<li>Fixed some small issues and improved performance.</li>
</ul>
<h3>Version 1.9.0</h3>
<ul>
<li>A hotkey has been added that toggles the level of progress bar
announcement between values such as: "Announce all progress bars",
"Announce some progress bars", "Announce all progress bars except the
voice message playback progress bar" and "Do not announce any progress
bars".</li>
<li>For those users who have automatic media downloads disabled in Unigram,
the progress bar announcement level can be set to "Announce all progress
bars except the voice message playback progress bar", and for those who
have it enabled, it is better to set it to "Do not announce progress
bars".</li>
<li>Added Spanish, Croatian and Persian localizations.</li>
<li>Fixed minor bugs from previous versions.</li>
</ul>
<h3>Version 1.8.0</h3>
<ul>
<li>The name and size of the file will be spoken when the cursor is focused on
the "Open File" button or the "Download File" button, and when the cursor
is focused on the play button of the audio file, you will hear its name
and duration.</li>
<li>Added hotkey to move focus to edit field. If the focus is already in the
edit field, then after pressing the hot key, it will move to where it was
before.</li>
<li>The chat activity tracking feature is now enabled by double pressing ALT +
T. You can simply turn it on or turn it on temporarily until the next time
you close the application.</li>
<li>Added the ability to select the type of notification for recording voice
messages. This is done by double pressing the control+d hotkey. There you
can choose between sound, text notification, or return to the standard
voice message recording behavior.</li>
</ul>
<h3>Version 1.7.0</h3>
<ul>
<li>Significantly improved the function of recording voice
messages. Recording, sending and canceling the recording of a voice
message are accompanied by characteristic sounds.</li>
<li>Also, when performing these functions, the focus remains in its position
and does not jump to either the record button or the message input field.</li>
</ul>
<h3>Version 1.7.0</h3>
<ul>
<li>Added the ability to track chat activity. This option can be enabled by
pressing ALT+shift+T and remains active until Unigram is closed or NVDA is
next restarted.</li>
<li>The hotkey that activates the "More Options" button now works in the voice
chat window and the call window.</li>
</ul>
<h3>Version 1.6.0</h3>
<ul>
<li>If the media attached to the message is opened using the spacebar, after
closing it, the focus will return to the last element that was in focus.</li>
<li>Now you can return to the active voice chat not only from the current
group, but also from any other chat.</li>
<li>Pressing ALT+shift+C in an open chat will return you to the voice chat
instead of calling the contact.</li>
<li>If a message has not been sent, you will be notified as soon as that
message has been focused.</li>
<li>If the focused message contains a link, you'll only hear the text of the
link itself, not the entire message.</li>
<li>Fixed an issue where status changes for buttons such as Mute/Unmute Mic
and Enable/Disable Camera were not reported in private calls and voice
chats.</li>
<li>Now the message copy function allows you to copy the contents of items in
the message quick view window.</li>
</ul>
<h3>Version 1.5.1</h3>
<p>This update fixes a huge number of bugs and improves the performance of the
add-on.</p>
<h3>Version 1.5.0</h3>
<ul>
<li>This update adds a hotkey that clicks the "Instant View" button in a
message if included in the message.</li>
<li>By default, this feature is activated with the ALT+Q hotkey.</li>
<li>After opening such an article, the focus will automatically go to the
first element of this article, and after closing, the focus will return to
the last viewed message.</li>
<li>We also fixed an issue where not all article elements in the Instant View
window were readable, even if they contained text content.</li>
</ul>
<h3>Version 1.1.7</h3>
<p>Added Turkish localization.</p>
Thunderbird+http://addons.nvda-project.org/addons/thunderbirdPlus.hu.html2023-08-08T16:02:07Z2023-05-10T20:38:33Z
<ul>
<li>Authors: Pierre-Louis Renaud (From Thunderbird 78 to 102) & Cyrille Bougot
(TB 102), Daniel Poiraud (From TB 78 to 91), Yannick (TB 45 to 60);</li>
<li>URL: <a href="https://www.rptools.org/NVDA-Thunderbird/get.php?pg=manual&lang=en">User manual</a> ; <a href="https://www.rptools.org/NVDA-Thunderbird/get.php?pg=changes&lang=en">History of changes at RPTools.org</a> ; <a href="https://www.rptools.org/NVDA-Thunderbird/toContact.html">Contact
in French or English</a> ;</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=thunderbirdPlus">stable version</a></li>
<li>Download <a href="https://www.rptools.org/?p=8610">Latest version from RPTools.org</a> ;</li>
<li>NVDA compatibility: 2019.3 and later;</li>
<li>Thunderbird compatibility: versions 102.x;</li>
<li><a href="https://github.com/RPTools-org/ThunderbirdPlus/">Source code on gitHub</a></li>
</ul>
<h2>Description</h2>
<p>This add-on greatly improves the Mozilla Thunderbird messaging client's
comfort and efficient use with NVDA.</p>
<p>Improvements relate to the following aspects:</p>
<h3>Auditory Comfort</h3>
<ul>
<li>Alerts such as "so-and-so requested a return receipt" can be deactivated
via an option;</li>
<li>The alerts "This is a draft" and "Thunderbird thinks this message is
fraudulent" are simply dismissed in silence;</li>
<li>Options allow you to disable mailing list names announcement, remove or
group "RE" mentions and clean up the names of correspondents by removing
numbers and other annoying special characters;</li>
</ul>
<h3>Navigating The Main Window</h3>
<ul>
<li>Moving to the next panel is done using the TAB key, while the Escape key
returns to the previous panel. This is more comfortable than through F6
and Shift+F6.</li>
<li>The selection of tabs with Control+Tab and Control+number is spoken as in
this example: Tab 1 of 4, inbox;</li>
<li>A keyboard shortcut allows you to list tabs in a menu in order to easily
activate one of them;</li>
<li>A keyboard shortcut is used to display the context menu of the tabs bar;</li>
</ul>
<h3>The Folder Tree view</h3>
<ul>
<li>Alt+Down Arrow and Alt+Up Arrow let you navigate among folders containing
unread messages;</li>
<li>Typing a letter or number selects the next folder whose name begins with
that character. With the Shift key, the move occurs from bottom to
top. Besides, the name of the account to which the folder belongs is
announced;</li>
<li>Pressing Space bar on a folder containing unread messages selects the
first unread message of the message list;</li>
<li>Two dialogs for accounts and their associated folders allow you to filter
them by keyword or display only folders with unread messages;</li>
</ul>
<h3>The Message List</h3>
<ul>
<li>Choosing columns and their layout within the message list is made
accessible through a simple dialog;</li>
<li>Viewing the columns of the message list: shortcuts allow you to easily
listen to, spell or copy the sender's name, the message subject or its
date by typing a digit on the alphanumeric keypad. For instance, a single
press on 1 or & announces the sender, two presses spell the name and three
presses copy it to the clipboard;</li>
<li>Viewing the headers in the header pane displayed using F8: with Alt+ a
digit, 1 press announces any header containing the sender's addresses or
recipients, 2 presses open a dialog to copy them, 3 presses open the
native Thunderbird context menu associated with the header;</li>
<li>Cleaned quick message text preview via space key, Alt+down arrow or F4:
Large header blocks in message quotes are replaced by the phrase "Sender
name wrote". NVDA will also announce "clickable link" instead of the long
address of the link.</li>
<li>Quick overview of quotes in chronological order, from bottom to top, via
Shift+Space, Alt+up arrow or Shift+F4;</li>
<li>Easy access to attachments using the shortcut Alt+page down or via number
1 of alphanumeric keypad;</li>
</ul>
<h3>Quick Filter Bar And Priority Tag Management</h3>
<ul>
<li>It is possible to navigate filtering options with the vertical arrows. The
Enter key is used to check or uncheck a filter;</li>
<li>Adding or removing tags is done by simply pressing Shift+ a digit on the
alphanumeric keyboard. For example, press Shift+4 to add the "To Do" tag
to a message. You can then filter the message list by tag via the quick
filter bar which is hence accessible;</li>
</ul>
<h3>The Message Write Window</h3>
<p>Alt+1 announces the Sender, Alt+2 announces the Recipient, Alt+3 announces
the Attachments, etc. Two presses place the focus on one of these fields;</p>
<h3>Spell-check Dialog</h3>
<ul>
<li>The misspelled word is announced with or without spelling before the
suggested word. The shortcuts NVDA+Tab or Alt+up arrow announce misspelled
and replacement words: 1 press spells the words at normal speed, 2 presses
spell them quickly, 3 presses copy the misspelled word to the clipboard
for analysis in another edit field;</li>
<li>Various combinations involving the Enter key trigger the Replace, Replace
All, Ignore, Ignore All, or Add Word to Dictionary buttons have been added
for even more convenience within this dialog;</li>
</ul>
<h3>Automatic Update</h3>
<p>ThunderbirdPlus contains an independent auto-update system with
deactivation/reactivation and postponement features;</p>
<h3>Side-to-side Operation with Chichi</h3>
<p>ThunderbirdPlus is designed to work seamlessly with Chichi, an add-on that
installs directly onto Thunderbird.</p>
<p>Read about this on the <a href="https://www.rptools.org/NVDA-Thunderbird/get.php?pg=chichi&lang=en">page of Chichi</a> ;</p>
<p>And many other things that you will discover by reading the <a href="https://www.rptools.org/NVDA-Thunderbird/get.php?pg=manual&lang=en">user manual</a>
;</p>
URL Shortenerhttp://addons.nvda-project.org/addons/urlShortener.hu.html2024-03-10T18:40:21Z2023-04-16T09:27:21Z
<ul>
<li>Author: Noelia Ruiz Martínez</li>
</ul>
<p>This add-on is used to shorten URLs from NVDA through <a href="https://is.gd">is.gd</a>.</p>
<h2>Shorten URL dialog</h2>
<p>Go to NVDA's menu, Tools submenu, and activate the Shorten URL item.</p>
<p>Alternatively, you can assign a gesture from the Input gestures dialog of
NVDA.</p>
<p>The Shorten URL dialog includes the following controls:</p>
<ul>
<li>A list to select one of the saved URLs. From this list, Press shift+tab to
search, and tab to press one of the following buttons.</li>
<li>Copy shortened URL. This can also be activated by pressing Enter from the
URLs list.</li>
<li>A readonly box showing details about the selected URL.</li>
<li>Set of controls to shorten a new URL: Provide the new URL; optionally, you
can set a display name and a custom subfix for the shortened URL. Finally,
press the Shorten URL button.</li>
<li>Rename: opens a dialog to provide a new name to display the selected URL
on the list.</li>
<li>Delete: opens a dialog to delete the selected URL.</li>
<li>Remove saved URLs: opens a dialog to remove the saved URLs from the
configuration folder.</li>
<li>Close.</li>
</ul>
<h2>Changes for 8.0.0</h2>
<ul>
<li>Added a readonly box with details about the selected URL.</li>
</ul>
<h2>Changes for 5.0.0</h2>
<ul>
<li>The new URL dialog has been replaced with a set of controls in the main
dialog, so that the focus can be placed in the relevant field to fix
possible errors.</li>
</ul>
<h2>Changes for 2.0.0</h2>
<ul>
<li>The Shorten URL option won't appear multiple times in Tools submenu when
reloading plugins.</li>
<li>The New URL dialog includes an edit box to provide a custom subfix for the
shortened URL.</li>
</ul>
<h2>Changes for 1.0.0</h2>
<ul>
<li>Initial version.</li>
</ul>
TeleNVDAhttp://addons.nvda-project.org/addons/TeleNVDA.hu.html2024-02-13T14:37:04Z2023-03-28T10:35:29Z
<ul>
<li>Authors: Asociación Comunidad Hispanohablante de NVDA and other
contributors. Original work by Tyler Spivey and Christopher Toth</li>
<li>NVDA Compatibility: 2019.3 and beyond</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=TeleNVDA">stable version</a></li>
</ul>
<p>Note: in order to make download easier for users who need assistance or
training and have limited computing skills, we provide an alternate link to
the latest stable version which is easy to remember and share. You can go to
<a href="https://nvda.es/tele">nvda.es/tele</a> and download the add-on directly,
without intermediate web pages.</p>
<p>Welcome to the TeleNVDA addon, which will allow you to connect to another
computer running the free NVDA screen reader. With this add-on, you can
connect to another person's computer, or allow a trusted person to connect
to your system to perform routine maintenance, diagnose a problem, or
provide training. This add-on is a modified version of the <a href="https://nvdaremote.com">NVDA Remote
add-on</a>, and is maintained by the NVDA spanish
community. It's fully compatible with NVDA Remote. These are the current
differences:</p>
<ul>
<li>An option allows blocking remote speech commands different from text.</li>
<li>An option to mute remote speech when controlling the local machine and
unmute it when controlling the remote machine.</li>
<li>Improved support for proxy servers and TOR hidden services (<a href="https://addons.nvda-project.org/addons/proxy.en.html">Proxy support
add-on</a> is
required).</li>
<li>Ability to change the f11 key to another gesture. Now this works as a
common script so, you can assign gestures in the "Input Gestures" dialog.</li>
<li>a gesture (unassigned by default) to open the addon options</li>
<li>Ability to assign a gesture to the send ctrl+alt+delete option in the
input Gestures dialog. Warning! you shouldn't assighn the ctrl+alt+delete
keys to this option. Doing it will stil work normally, but anytime you
press ctrl+alt+delete keys to send the ctrl+alt+delete to the remote
machine, your own machine will also be affected by the ctrl+alt+delete
function, which is likely not what you expect!</li>
<li>Ability to ignore the next immediate gesture completely, it is useful if
you need to send to the remote machine the gesture used to toggle between
host and remote machine.</li>
<li>Ability to exchange small files (up to 10 MB) among users connected to the
same session.</li>
<li>Ability to forward ports via UPNP.</li>
<li>Ability to use a custom portcheck service.</li>
<li>Some GUI tweaks.</li>
<li>Several bug fixes.</li>
</ul>
<h2>Before You Begin</h2>
<p>You will need to have installed NVDA on both computers, and obtain the
TeleNVDA addon.</p>
<p>The installation of both NVDA and the TeleNVDA addon are standard. If you
need more information, this can be found in NVDA's User Guide.</p>
<h2>Updating</h2>
<p>When updating the addon, if you have installed TeleNVDA on the secure
desktop, it is recommended that you also update the copy on the secure
desktop.</p>
<p>To do this, first update your existing addon. Then open the NVDA menu,
preferences, General settings, and press the button labeled "Use currently
saved settings on the logon and other secure screens (requires administrator
privileges)".</p>
<h2>Starting a remote session through a relay server</h2>
<h3>On the computer to be controlled</h3>
<ol>
<li>Open the NVDA menu, Tools, Remote, Connect. Or directly press
NVDA+alt+page up. This gesture can be modified from the NVDA input
gestures dialog.</li>
<li>Choose client in the first radio button.</li>
<li>Select Allow this machine to be controlled in the second set of radio
buttons.</li>
<li>In the host field, enter the host of the server you are connecting to,
for example remote.nvda.es. When the particular server uses an
alternative port, you can enter the host in the form
<host>:<port>, for example remote.nvda.es:1234. If you are
connecting to an IPV6 address, enter it between square brackets, for
example [2603:1020:800:2::32].</li>
<li>Enter a key into the key field, or press the generate key button. The key
is what others will use to control your computer. The machine being
controlled and all its clients need to use the same key.</li>
<li>Press ok. Once done, you will hear a tone and connected. If the server
includes a message of the day, it will be displayed in a dialog box. You
will see this dialog everytime you connect or only the first time,
depending on the server configuration.</li>
</ol>
<h3>On the machine that is to be the controlling computer</h3>
<ol>
<li>Open the NVDA menu, Tools, Remote, Connect. Or directly press
NVDA+alt+page up. This gesture can be modified from the NVDA input
gestures dialog.</li>
<li>Choose client in the first radio button.</li>
<li>Select Control another machine in the second set of radio buttons.</li>
<li>In the host field, enter the host of the server you are connecting to,
for example remote.nvda.es. When the particular server uses an
alternative port, you can enter the host in the form
<host>:<port>, for example remote.nvda.es:1234. If you are
connecting to an IPV6 address, enter it between square brackets, for
example [2603:1020:800:2::32].</li>
<li>Enter a key into the key field, or press the generate key button. The
machine being controlled and all its clients need to use the same key.</li>
<li>Press ok. Once done, you will hear a tone and connected. If the server
includes a message of the day, it will be displayed in a dialog box. You
will see this dialog everytime you connect or only the first time,
depending on the server configuration.</li>
</ol>
<h3>Connection security warning</h3>
<p>If you connect to a server without a valid SSL certificate, you will receive
a connection security warning.</p>
<p>This may mean that your connection is insecure. If you trust this server
fingerprint, you can press "Connect" to connect once, or "Connect and do not
ask again for this server" to connect and save the fingerprint.</p>
<h2>Direct connections</h2>
<p>The server option in the connect dialog allows you to set up a direct
connection.</p>
<p>Once selecting this, select which mode your end of the connection will be
in.</p>
<p>The other person will connect to you using the opposite.</p>
<p>Once the mode is selected, you can use the Get External IP button to get
your external IP address and make sure the port which is entered in the port
field is forwarded correctly. If enabled on your router, you can forward the
port using UPNP before performing portcheck.</p>
<p>If portcheck detects that your port (6837 by default) is not reachable, a
warning will appear.</p>
<p>Forward your port and try again. Also, ensure that the NVDA process is
allowed through Windows firewall.</p>
<p>Note: The process for forwarding ports, enabling UPNP or configuring Windows
firewall is outside of the scope of this document. Please consult the
information provided with your router for further instruction.</p>
<p>Enter a key into the key field, or press generate. The other person will
need your external IP along with the key to connect. If you entered a port
other than the default (6837) in the port field, make sure that the other
person appends the alternative port to the host address in the form
<external ip>:<port>.</p>
<p>If you want to forward the chosen port using UPNP, enable the "Use UPNP to
forward this port if possible" checkbox.</p>
<p>Once ok is pressed, you will be connected. When the other person connects,
you can use TeleNVDA normally.</p>
<h2>Controlling the remote machine</h2>
<p>Once the session is connected, the user of the controlling machine can press
f11 to start controlling the remote machine (e.g. by sending keyboard keys
or braille input). This gesture can be changed from NVDA Input Gestures
Dialog.</p>
<p>When NVDA says controlling remote machine, the keyboard and braille display
keys you press will go to the remote machine. Furthermore, when the
controlling machine is using a braille display, information from the remote
machine will be displayed on it. Press f11 again to stop sending keys and
switch back to the controlling machine.</p>
<p>For best compatibility, please ensure that the keyboard layouts on both
machines match.</p>
<h2>Sharing your session</h2>
<p>To share a link so someone else can easily join your TeleNVDA session,
select Copy Link from the Remote menu. You can also assign gestures from the
NVDA Input Gestures dialog to speed up this task.</p>
<p>You can choose between two link formats. First one is compatible with both
NVDA Remote and TeleNVDA, and is the most recommended for now. Second one is
compatible only with TeleNVDA.</p>
<p>IF you are connected as the controlling computer, this link will allow
someone else to connect and be controlled.</p>
<p>If instead you have set up your computer to be controlled, the link will
allow people who you share it with to control your machine.</p>
<p>Many applications will allow users to activate this link automatically, but
if it does not run from within a specific app, it can be coppied to the
clipboard and run from the run dialog.</p>
<p>Note that the shared link may not work if you copy it from a server running
in direct connection mode.</p>
<h2>Send Ctrl+Alt+Del</h2>
<p>While sending keys, it is not possible to send the CTRL+Alt+del combination
normally.</p>
<p>If you need to send CTRL+Alt+del, and the remote system is on the secure
desktop, use this command. You can also assighn a gesture for this command
in the input Gestures dialog.</p>
<h2>Send toggle key between local and remote computer</h2>
<p>Usually when you press the assigned gesture to switch between the local and
the remote machine, it won't be sent to the remote machine; it will switch
between the local machine and the remote machine instead.</p>
<p>If you need to send this or any gesture to the remote machine, you can
override this behavior for the next immediate gesture by activating the
ignore next gesture script.</p>
<p>By default, this script is assigned to the control + f11 key. This gesture
can be changed from NVDA Input Gestures Dialog.</p>
<p>When this script is called, the next gesture will be ignored and will be
sent to the remote machine, including the gesture to activate the ignore
next gesture script. Once the next gesture has been sent, it will return to
the usual behavior.</p>
<h2>Remotely Controlling an Unattended Computer</h2>
<p>Sometimes, you may wish to control one of your own computers remotely. This
is especially helpful if you are traveling, and you wish to control your
home PC from your laptop. Or, you may want to control a computer in one room
of your house while sitting outside with another PC. A little advanced
preparation makes this convenient and possible.</p>
<ol>
<li>Enter the NVDA menu, and choose Tools, then Remote. Finally, press Enter
on Options.</li>
<li>Check the box that says, "Auto connect to control server on startup".</li>
<li>Select whether to use a remote relay server or to locally host the
connection. If you decide to host the connection, you can try to forward
ports using UPNP by checking the provided checkbox.</li>
<li>Select Allow this machine to be controlled in the second set of radio
buttons.</li>
<li>If you host the connection yourself, you will need to ensure that the
port entered in the port field (6837 by default) on the controlled
machine can be accessed from the controlling machines.</li>
<li>If you wish to use a relay server, Fill in both the Host and Key fields,
tab to OK, and press Enter. The Generate Key option is not available in
this situation. It is best to come up with a key you will remember so you
can easily use it from any remote location.</li>
</ol>
<p>For advanced use, you can also configure NVDA Remote to automatically
connect to a local or remote relay server in controlling mode. If you want
this, select Control another machine in the second set of radio buttons.</p>
<p>Note: The autoconnect at startup-related options in the options dialog do
not apply until NVDA is restarted.</p>
<h2>Muting Speech on the Remote Computer</h2>
<p>If you do not wish to hear the remote computer's speech or NVDA specific
sounds, simply access the NVDA menu, Tools, and Remote. Arrow down to Mute
Remote, and press Enter. You can assign a gesture to this option from the
NVDA Input Gestures dialog. Please note that this option will not disable
remote braille output to the controlling display when the controlling
machine is sending keys.</p>
<p>You can mute permanently the remote speech while you work on your local
machine by enable that setting from the TeleNVDA category on the NVDA
settings dialog.</p>
<h2>Ending a remote Session</h2>
<p>To end a remote session, do the following:</p>
<ol>
<li>On the controlling computer, press F11 to stop controlling the remote
machine. You should hear or read the message: "Controlling local
machine." If you instead hear or read a message that you are controlling
the remote machine, press F11 once more.</li>
<li>Access the NVDA menu, then Tools, Remote, and press Enter on Disconnect.</li>
</ol>
<p>Alternatively, you can press NVDA+alt+page down to directly disconnect the
session. This gesture can be changed from NVDA Input Gestures Dialog. To
keep the other end safe, you may press this gesture while sending keys to
disconnect the remote computer.</p>
<h2>Push clipboard</h2>
<p>The Push clipboard option in the remote menu allows you to push text from
your clipboard.</p>
<p>When activated, any text on the clipboard will be pushed to the other
machines.</p>
<h2>Sending files</h2>
<p>The Send file option in the remote menu allows you to send small files to
all session members, including the controlled machine. Please note, you can
only send files smaller than 10 MB. Sending or receiving files on secure
screens is not allowed.</p>
<p>Also note that sending files may consume too much network traffic on the
server, depending on the file size, the computers connected to the same
session and the amount of files sent. Contact your server administrator and
ask them if the traffic is billed. In that case, consider using another
platform to exchange files.</p>
<p>When the file is received on the remote machines, a Save as dialog will pop
up, allowing you to choose where to save the file.</p>
<h2>Configuring TeleNVDA to Work on a Secure Desktop</h2>
<p>In order for TeleNVDA to work on the secure desktop, the addon must be
installed in the NVDA running on the secure desktop.</p>
<ol>
<li>From the NVDA menu, select Preferences, then General Settings.</li>
<li>Tab to the Use Currently Saved Settings on the Logon and Other Secure
Screens (requires administrator privileges) button, and press Enter.</li>
<li>Answer Yes to the prompts regarding copying your settings and about
copying plugins, and respond to the User Account Control prompt that may
appear.</li>
<li>When settings are copied, press Enter to dismiss the OK button. Tab to OK
and Enter once more to exit the dialog.</li>
</ol>
<p>Once TeleNVDA is installed on the secure desktop, if you are currently being
controlled in a remote session, you will have speech and braille access to
the secure desktop when switched to.</p>
<h2>Clearing SSL certificate fingerprints</h2>
<p>If you no longer want to trust the server fingerprints you've trusted, you
can clear all of the trusted fingerprints by pressing the "Delete all
trusted fingerprints" button in the Options dialog.</p>
<h2>Using a custom portcheck service</h2>
<p>By default, TeleNVDA checks open ports using a service provided by the NVDA
spanish community. You can change the service URL from the options
dialog. Ensure that the port to check is part of the custom URL and the
results are returned in the expected format. A portcheck sample script is
distributed in TeleNVDA repository, so you can host your own copy if
desired.</p>
<h2>Altering TeleNVDA</h2>
<p>This project is covered by the GNU General Public License, version 2 or
later. You may clone <a href="https://github.com/nvda-es/TeleNVDA">this repo</a> to make alteration to TeleNVDA, provided
that you read, understand and respect the license terms. The MiniUPNP module
is licensed under a BSD-3 clause license.</p>
<h3>3rd Party dependencies</h3>
<p>These can be installed with pip:</p>
<ul>
<li>Markdown</li>
<li>scons</li>
</ul>
<p>In order to build the URL handler executable, you need Visual Studio 2019 or
later.</p>
<h3>To package the add-on for distribution:</h3>
<ol>
<li>Open a command line, change to the root of <a href="https://github.com/nvda-es/TeleNVDA">this repo</a></li>
<li>Run the <strong>scons</strong> command. The created add-on, if there were no errors,
is placed in the current directory.</li>
</ol>
Nuance Vocalizer serieshttp://addons.nvda-project.org/addons/vocalizer.hu.html2023-05-10T20:38:32Z2023-02-22T16:54:31Z
<ul>
<li>Authors: Nuance Communications (distributor: Tiflotecnia, LDA)</li>
<li>download <a href="https://www.nvaccess.org/addonStore/legacy?file=vocalizerautomotive">Vocalizer Automotive driver</a></li>
<li>download <a href="https://www.nvaccess.org/addonStore/legacy?file=vocalizerexpressive">Vocalizer Expressive driver</a></li>
<li>NVDA compatibility: 2019.3 (2022.1 for Expressive) and later</li>
</ul>
<p>Vocalizer synthesizer series (Automotive and Expressive) are a series of
commercial synthesizers from Nuance Communications, with the add-ons
licensed, packaged, and distributed by Tiflotecnia, LDA. These add-ons
include:</p>
<ul>
<li>Vocalizer Automotive (driver 2.x)</li>
<li>Vocalizer Expressive (driver 3.x)</li>
</ul>
<p>For more information and to purchase the package, visit <a href="https://vocalizer-nvda.com/">Tiflotecnia
website</a>.</p>
Virtual Audio Cablehttp://addons.nvda-project.org/addons/virtualAudioCable.hu.html2023-05-10T20:38:32Z2023-02-21T18:28:24Z
<ul>
<li>Author: Doug Lee.</li>
<li>download <a href="https://www.dlee.org/vac/NVDA/vac.nvda-addon">stable version</a></li>
</ul>
<p>This add-on improves usage of Virtual Audio Cable with NVDA. For more
information about this add-on, visit <a href="https://www.dlee.org/vac/NVDA/">TeamTalk add-on homepage</a>.</p>
Skypehttp://addons.nvda-project.org/addons/skype.hu.html2023-05-10T20:38:32Z2023-02-21T18:28:13Z
<ul>
<li>Author: Doug Lee.</li>
<li>download <a href="https://www.dlee.org/skype/NVDA/skype.nvda-addon">stable version</a></li>
</ul>
<p>This add-on improves usage of Skype with NVDA. For more information about
this add-on, visit <a href="https://www.dlee.org/skype/NVDA/">Skype add-on homepage</a>.</p>
Enhanced Annotationshttp://addons.nvda-project.org/addons/enhancedAnnotations.hu.html2024-02-13T14:38:05Z2022-09-04T19:23:14Z
<ul>
<li>Authors: George Kerscher, Noelia Ruiz Martínez</li>
</ul>
<p>In the DAISY Consortium, best practices are developed for publishers and
authors for providing extended (long) descriptions.</p>
<p>The best practices use the HTML details element that follows the image, or a
link to another file that contains the extended description.</p>
<p>In both options, the user would need to move to the details or the link and
activate it.</p>
<p>Having a keystroke to put focus on the details or the link is ideal.</p>
<p>Our best practices recommend that the details or the link immediately
follows the image, and if the link is followed, a back link to the exact
location must be provided. This makes it certain that the user will not get
lost.</p>
<p>However it is probable that authors in the wild will place the extended
(long) description almost anywhere. In these cases, the user would want to
return to the image and hence the need for a way to return to the original
image.</p>
<p>This add-on provides both features, in support of this <a href="https://github.com/nvaccess/nvda/issues/13940">issue opened in
NVDA's repository</a>.</p>
<h2>Commands</h2>
<ul>
<li>NVDA+alt+d: moves the cursor to the element identified with aria-details.</li>
<li>NVDA+alt+shift+d: moves the cursor to the original element, for example,
an image with furter details like a long description. If NVDA+alt+d has
been pressed several times to move to related annotations, it'll be
possible to go back to each origin.</li>
</ul>
<p>The above commands can be modified from NVDA's menu, Preferences submenu,
Input gestures dialog, Browse mode category.</p>
<h2>Changes for 2.0</h2>
<ul>
<li>Added ability to move back through multiple annotation origins.</li>
<li>Requires NVDA 2023.1 or later.</li>
</ul>
MathCAThttp://addons.nvda-project.org/addons/MathCAT.hu.html2024-03-23T11:29:06Z2022-06-08T22:52:29Z
<ul>
<li>Author: Neil Soiffer</li>
<li>NVDA compatibility: 2018.1 or later (untested in earlier versions)</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=mathcat">stable version</a></li>
</ul>
<p>MathCAT is designed to eventually replace MathPlayer because MathPlayer is
no longer supported. MathCAT generates speech and braille from MathML. The
speech for math produced by MathCAT is enhanced with prosody so that it
sounds more natural. The speech can be navigated in three modes using the
same commands as MathPlayer. In addition, the navigation node is indicated
on a braille display. Both Nemeth and UEB technical are supported.</p>
<p>MathCAT has a number of configuration options that control speech,
navigation, and braille. Many of these can be set in the MathCAT settings
dialog (found NVDA Preferences menu). For more information on these
settings, see the <a href="https://nsoiffer.github.io/MathCAT/users.html">MathCAT
documentation</a>. The
documentation includes a link to <a href="https://nsoiffer.github.io/MathCAT/nav-commands.html">a table listing all of the navigation
commands in MathCAT</a>.</p>
<p>Note: MathCAT is a general library for generating speech and braille from
MathML. It is used by other AT projects besides NVDA. For information on the
MathCAT project in general, see the main <a href="https://nsoiffer.github.io/MathCAT">MathCAT Documentation
page</a>.</p>
<p>Who should use MathCAT:</p>
<ul>
<li>Those who need high quality Nemeth braille (MathPlayer's Nemeth is based
on liblouis' Nemeth generation which has a number of significant bugs that
are technically difficult to fix).</li>
<li>Those who need UEB technical braille</li>
<li>Those who want to try out the latest technology and are willing to help by
reporting bugs</li>
<li>Those who use Eloquence as a voice</li>
</ul>
<p>Who should NOT use MathCAT:</p>
<ul>
<li>Anyone who uses MathPlayer with a non-English language (translations exist
for Indonesian and Vietnamese; translations will be coming in the future)</li>
<li>Anyone who uses MathPlayer with a non-Nemeth/non-UEB braille output
(contact me if you want to help out with a braille translation)</li>
<li>Anyone who prefers Access8Math to MathPlayer (for speech or other
features)</li>
</ul>
<p>MathCAT's rules for speech are not yet as extensive as MathPlayer's rules --
that may be another reason to stick with MathPlayer. MathCAT is being used
as a testbed for ideas for MathML 4 that allow authors to express their
intent so that ambiguous notations can be spoken correctly and not guessed
at. I have held off on adding too many rules since the architecture of
MathCAT is centered around using and inferring author intent and these are
not fully settled yet.</p>
<h2>MathCAT Update Log</h2>
<h3>Version 0.5.0</h3>
<ul>
<li>Added German LaTeX braille code. Unlike other braille codes, this
generates ASCII chars and uses the current braille output table to
translate the characters to braille.</li>
<li>Added (expermental) ASCIIMath braille code. Like the LaTeX braille code,
this generates ASCII chars and uses the current braille output table to
translate the characters to braille.</li>
<li>Added "CopyAs" preference that supports copying as MathML, LaTeX, or
ASCIIMath using cntl+C when focused on MathML (as before). The currently
focused node is copied. Note: this is only listed in the prefs.yaml file
and is not exposed (yet) in the MathCAT Preferences dialog.</li>
</ul>
<h3>Version 0.4.2</h3>
<ul>
<li>Fixed language switching when voice changes and MathCAT language is "Auto"</li>
<li>Added more checks for $Impairments to improve reading when it is not set
for those who are blind</li>
<li>Nemeth: fix for "~" when it isn't part of an mrow</li>
<li>UEB: character additions, "~" spacing fix if prefix, xor fix,</li>
<li>MathML cleanup for accented vowels (mainly for Vietnamese)</li>
<li>Major rewrite of preference reading/updating code with big speedup --
added <code>CheckRuleFiles</code> pref to control which files are checked for updates</li>
<li>Added two new interface calls -- enables setting the navigaton location
from the braille cursor (not part of MathCAT addon yet)</li>
</ul>
<h3>Version 0.3.11</h3>
<ul>
<li>Upgraded to python 3.11 and verified working with NVDA 2024.1</li>
<li>Fix bugs in Vietnamese braille and also in Speech, mostly for chemistry.</li>
<li>Fix broken braille when braille code and dependent language don't match
(specifically Vietnam braille and Vietnamese speech)</li>
<li>Fix whitespace bug in HTML inside of tokens</li>
<li>Improve roman numeral detection</li>
</ul>
<h3>Version 0.3.9</h3>
<ul>
<li>Added Traditional Chinese translation (thanks to Hon-Jang Yang)</li>
<li>Fixed bug with navigating into the base of a scripted expression that has
parenthesis</li>
<li>Significantly changed the way whitespace is handled. This mainly affects
braille output (spaces and "omission" detection).</li>
<li>Improved recognition of chemistry</li>
<li>UEB braille fixes that came up from adding chemistry examples</li>
<li>UEB fixes for adding auxillary parenthesis in some cases</li>
</ul>
<h3>Version 0.3.8</h3>
<p>Braille:</p>
<ul>
<li>Dialog has been internationalized for several languages (many thanks to
the translators!)</li>
<li>Initial implementation of CMU -- the braille code used in Spanish and
Portuguese speaking countries</li>
<li>Fix some UEB bugs and added some characters for UEB</li>
<li>Significant improvements to Vietnamese braille</li>
</ul>
<p>Other fixes:</p>
<ul>
<li>Change relative rate dialog slider to have a maximum value of 100% (now
only allows setting slower rates). Also, added step sizes so it is easier
to raise/lower the rate significantly.</li>
<li>Fix eSpeak bug that sometimes cut off speech when the relative rate was
changed</li>
<li>Improvements to Vietnamese speech</li>
<li>Fixed bug with OneCore voices saying "a"</li>
<li>Fixed some navigation bugs when <code>AutoZoomOut</code> is False (not the default)</li>
<li>Fix updating around language changes and some other dialog changes so they
take effect immediately upon clicking "Apply" or "OK".</li>
<li>Added an "Use Voice's Language" option so that out of the box, MathCAT
will speak in the right language (if there is a translation)</li>
<li>Several improvements for cleaning up poor MathML code</li>
</ul>
<h3>Version 0.3.3</h3>
<p>This release has a number of bug fixes in it. The major new features and bug
fixes are:</p>
<ul>
<li>Added Spanish Translation (thanks to Noelia Ruiz and María Allo Roldán)</li>
<li>Modified navigation so that it starts zoomed in one level</li>
<li>Added cntrl+alt+arrow as a way to navigate tabular structures. These keys
should be more memorable because they are used for table navigation in
NVDA.</li>
<li>Worked around NVDA bug for eSpeak voices that caused them to slow down
when the relative MathRate was set to be slower than the text speech rate.</li>
<li>Worked around a OneCore voice problem so that they will speak the long 'a'
sound.</li>
</ul>
<p>There are lots of small tweaks to the speech and some bug fixes for both
Nemeth and UEB.</p>
<p>Note: there is now an option to get Vietnam's braille standard as braille
output. This is still a work in progress and is too buggy to be used other
than for testing. I expect the next MathCAT release will contain a reliable
implementation.</p>
<h3>Version 0.2.5</h3>
<ul>
<li>More improvements chemistry</li>
<li><p>Fixes for Nemeth:</p>
<ul>
<li>Added "omission" rules</li>
<li>Added some rules for English Language Indicators</li>
<li>Added more cases where the Mulitpurpose indicator is needed</li>
<li>Fixes related to Nemeth and punctuation</li>
</ul>
</li>
</ul>
<h3>Version 0.2</h3>
<ul>
<li>Lots of bug fixes</li>
<li>Improvements to speech</li>
<li>A preference setting to control the duration of pausing (works with
changes to relative speech rate for math)</li>
<li>Support to recognize chemistry notation and speak it appropriately</li>
<li>Translations to Indonesian and Vietnamese</li>
</ul>
Speech Loggerhttp://addons.nvda-project.org/addons/speechLogger.hu.html2024-03-22T17:51:48Z2022-05-24T08:27:00Z
<h3>NVDA Speech Logger add-on</h3>
<ul>
<li>Author: Luke Davis, with contributions by James Scholes</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=speechLogger">stable version</a></li>
<li>NVDA compatibility: 2019.3.1 and later</li>
</ul>
<p>An <a href="https://nvaccess.org/">NVDA</a> add-on to log speech to a file or files. It can log speech
generated on the local machine into a text file. It can also log speech
from a remote machine received through the <a href="https://nvdaremote.com/">NVDA Remote</a> add-on, either
to the same or a different file.</p>
<h3>Configuration</h3>
<p>To configure this add-on, open the NVDA menu, go to Preferences, then
Settings, then Speech Logger (NVDA+N, P, S, then press S until you get
there, on a default U.S. English keyboard). There is also an unassigned
gesture in the Input Gestures "Configuration" category, which you can assign
and use to quickly open the add-on's settings directly. Note: the add-on
can only be configured while in the Normal Configuration profile of NVDA.
The add-on is not profile-aware. If you can think of some use case that
requires it to operate differently in different profiles, please contact the
author or file an issue on the <a href="https://github.com/opensourcesys/speechLogger/issues/new">GitHub repo</a>.</p>
<h3>The following settings are available:</h3>
<ul>
<li>The log directory. You can enter or browse for your desired destination
directory, which must already exist. System variables such as %temp%,
%userprofile%, etc., can be used in this field.</li>
<li>Local log filename. The created file will be placed in the above
directory. This will contain speech logged while the local log mode is
engaged. This can be the same as the remote log file. Leave blank to
disable this kind of logging completely.</li>
<li>Remote log filename. The created file will be placed in the above
directory. This will contain speech logged while the remote log mode is
engaged. It can be the same as the local log file. Leave blank to disable
this kind of logging completely.</li>
<li>Separator. This combobox lets you choose one of the available utterance
separators. See below for more information.</li>
<li>Custom separator. This field lets you enter a custom utterance separator
(see below), which is used if "custom" is chosen in the combobox.</li>
<li>Timestamp mode. This combobox allows you to choose between no timestamps,
and a timestamp at the start and end of each log session.</li>
<li>Log speech during say-all (read to end) mode. This add-on logs speech
generated when you press NVDA+DownArrow (NVDA+a in laptop layout). If you
would rather not have that kind of narrative long reading logged, un-check
this box.</li>
<li>Begin logging at startup. You can set this option to "Always", if you want
speech to be logged automatically when NVDA starts. This only applies to
local speech, and the default is "never".</li>
</ul>
<h4>Utterance separator</h4>
<p>When NVDA speaks something such as "<code>recycle bin 1 of 55</code>" while it's
reading your desktop, this is considered two separate utterances. The first
one is the item name ("<code>Recycle bin</code>", in this example), and the second is
the object position information ("<code>1 of 55</code>", in this example).</p>
<p>Depending on what you are reading, and how you have NVDA configured, there
can be several separate utterances that happen during a single speech
sequence.</p>
<p>In the normal NVDA log at debug level, each individual utterance is
separated with two spaces, as it is written in the example above.</p>
<p>Speech Logger allows you to separate utterances in the same way NVDA does
(with two spaces), or by one of a few reasonable alternatives (a newline, a
comma and a space, a tab, two underscores), or by a custom sequence of your
own devising.</p>
<p>If, for example, you wanted your utterance separator to be two dollar signs
(<code>$$</code>), you would set the combobox to "custom", and enter "<code>$$</code>" (without
the quotes), in the custom separator field. If you wanted it to be a
newline followed by a tab, you could enter "<code>\n\t</code>".</p>
<h3>Controls:</h3>
<p>This add-on has two keyboard shortcuts set by default, and one that is
unassigned.</p>
<p>The default gestures, which you can change in the NVDA Input Gestures
"<code>Speech Logger</code>" category, are:</p>
<ul>
<li>NVDA+Alt+L: start/stop logging of local speech.</li>
<li>NVDA+Shift+Alt+L: start/stop logging of remote speech.</li>
</ul>
<p>These are listed as "Toggles logging of local speech" and "Toggles logging
of remote speech", respectively.</p>
<p>Additionally, it has one unassigned gesture for opening its configuration
panel, which you may assign from the <code>Speech Logger</code> category in NVDA's
Input Gestures.</p>
<h3>A note on remote speech logging</h3>
<p>This add-on is intended to work with the NVDA Remote add-on, for logging of
remote speech.</p>
<p>It is important to know, that it is not possible to start logging for remote
sessions until you actually start one. There is no way to, for example,
start logging, and have it wait, on stand-by, until a remote session starts,
and begin logging at that time.</p>
<p>However, once started, logging will continue across remote sessions.</p>
<h3>Feedback and feature requests</h3>
<p>If you would like to suggest a feature or report a bug, please reach out by
email, or file an <a href="https://github.com/opensourcesys/speechLogger/issues/new">issue</a>.</p>
<p>If you find this add-on useful, it would really help if you could <a href="https://github.com/nvaccess/addon-datastore/discussions/2636">leave a
review</a>.</p>
<p>As always, I appreciate hearing that my add-ons are helpful, and finding out
what people are using them for.</p>
Cursor Locatorhttp://addons.nvda-project.org/addons/cursorLocator.hu.html2024-02-13T14:37:11Z2022-05-23T06:31:52Z
<ul>
<li>Authors: Noelia Ruiz Martínez, Sergio Gómez Codina.</li>
</ul>
<p>This add-on makes possible to know the position of the system caret respect
to the start of the current line, while typing to add text in documents or
multiline controls.</p>
<p>This feature deppends on the visual appearance of applications. Therefore,
you may need to disable line adjustment or configure the add-on for
different programs.</p>
<h2>Cursor Locator settings</h2>
<p>This panel is available from NVDA's menu, Preferences submenu, Settings
dialog.</p>
<p>It provides the following options:</p>
<ul>
<li>Report line length: You can type or choose a line length (number of
characters between 0 and 600), which will be announced by a hight tone
when it's reached. (The default value is 80 characters).</li>
<li>Maximum number of beeps for start of line notification: You can type or
select a value between 0 and 600. The default value is 0.</li>
<li>Maximum number of beeps for end of line notification: You can type or
select a value between 0 and 600. The default value is 0.</li>
<li>Pitch of sound for start of line: You can type or select a value between
20 and 20000. (The default value is 400 hertzs).</li>
<li>Length of sound for start of line: You can type or select a value between
20 and 2000. (The default value is 50 milliseconds).</li>
<li>Test sound for start of line: Press this button to test the configured
sound for start of line.</li>
<li>Pitch of sound for end of line: You can type or select a value between 20
and 20000. (The default value is 1000 hertzs).</li>
<li>Length of sound for end of line: You can type or select a value between 20
and 2000. (The default value is 50 milliseconds).</li>
<li>Test sound for end of line: Press this button to test the configured sound
for end of line.</li>
</ul>
<h2>Commands</h2>
<p>You can modify the gestures to the following commands trought the NVDA's
menu, Preferences submenu, Input gestures dialog:</p>
<ul>
<li>NVDA+control+shift+l: When possible, reports the lenght of the current
line (System caret category).</li>
<li>Not assigned: Shows the Cursor Locator settings dialog (Config category).</li>
</ul>
<h2>Changes for 3.0</h2>
<ul>
<li>Compatible with NVDA 2023.1.</li>
</ul>
<h2>Changes for 2.0</h2>
<ul>
<li>Added ability to repeat notifications when reaching end and start of line.</li>
<li>Added support for Office documents, and Notepad on Windows 11.</li>
</ul>
<h2>Changes for 1.0</h2>
<ul>
<li>Initial version</li>
</ul>
Screenshots wizardhttp://addons.nvda-project.org/addons/screenshots.hu.html2024-02-13T14:36:28Z2022-04-27T17:44:53Z
<ul>
<li>Author: Javi Domínguez.</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=scrsw">stable version</a>, compatible with NVDA 2021.2 and beyond.</li>
</ul>
<p>This add-on provides a wizard to take screenshots of the entire screen or
specific areas such as objects, windows, etc. It is activated by the <em>print
screen</em> key which on standard keyboards is usually the first of the group of
three to the right of F12. If you prefer to use another, it can be
configured in the NVDA preferences, input gestures.</p>
<p>When the wizard is invoked, a virtual rectangle is created around the object
with focus and a layer of keyboard commands is activated with the following</p>
<h2>commands</h2>
<ul>
<li>F1 presents an help message with basic commands; pressing twice opens this
document.</li>
</ul>
<h3>Rectangle information</h3>
<p>Keys 1 through 7 provide the following information:</p>
<ul>
<li>1: Coordinates of the upper left and lower right corners.</li>
<li>2: Rectangle dimensions, width per height.</li>
<li>3: The reference object.</li>
<li>4: Proportion of the rectangle area occupied by the reference object.</li>
<li>5: Indicates if part of the reference object is outside the rectangle.</li>
<li>6: Indicates if the rectangle exceeds the limits of the active window in
the foreground.</li>
<li>7: Proportion of the screen occupied by the rectangle.</li>
</ul>
<p>The space key reads all this information in a row.</p>
<h3>Object selection</h3>
<p>The reference object is the object on the screen that is delimited by the
rectangle at all times. First, this object will be the one with the focus of
the system, but another can be selected with the following keys:</p>
<ul>
<li>Up arrow: frames the container of the current object.</li>
<li>F: Frames the object with the focus.</li>
<li>N: Frames the object in the objects navigator.</li>
<li>W: Frames the active window.</li>
<li>M: frames the object under the mouse pointer.</li>
<li>S: Frames the entire screen.</li>
</ul>
<p>With down arrow the changes are undone.</p>
<h3>Rectangle size</h3>
<p>The size of the rectangle can be modified using the following keys:</p>
<ul>
<li>With shift + arrows the upper left corner is moved:</li>
<li>shift + up or down arrow moves the top edge,</li>
<li>shift + left or right arrow moves the left edge.</li>
<li>With control + arrows the lower right corner is moved:</li>
<li>control + up or down arrow moves the bottom edge,</li>
<li>control + left or right arrow moves the right edge.</li>
<li>control + shift + up arrow expands the rectangle, moving all four edges
outward.</li>
<li>control + shift + down arrow contracts the rectangle, moving all four
edges inward.</li>
</ul>
<p>The number of pixels for these movements can be changed with the page up and
page down keys. Also in preferences.</p>
<p>By resizing the rectangle the reference object may change. It will always
try to select the object that is centered, in the foreground and that
occupies a larger area within the rectangle. Object changes will be
announced when they occur.</p>
<h3>Capture the image</h3>
<p>Enter key captures the image of the screen area delimited by the rectangle,
it is saved in a file and exits.</p>
<p>Escape key cancels and exits.</p>
<h2>Settings</h2>
<p>In NVDA preferences, options, the following settings can be configured:</p>
<ul>
<li>The folder where the files will be saved. The user's documents folder by
default.</li>
<li>The image file format.</li>
<li>The action after saving (nothing, open the folder or open the file).</li>
<li>The number of pixels for each movement.</li>
</ul>
Proxy support for NVDAhttp://addons.nvda-project.org/addons/proxy.hu.html2023-05-10T20:38:33Z2022-04-27T09:43:44Z
<ul>
<li>Author: Jose Manuel Delicado</li>
<li>NVDA compatibility: 2022.4 and beyond</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=proxy">stable version</a></li>
</ul>
<p>This add-on allows the NVDA screen reader to connect to the Internet through
one or more proxy servers. To make it possible, it applies various patches
to the standard Python library or modifies certain environment variables,
depending on the chosen configuration. You will be able to update NVDA and
their add-ons automatically from your corporate environment and even perform
remote sessions, provided that your organization proxy server allows it.</p>
<h2>Features</h2>
<ul>
<li>Support for various proxy server types: http, socks4 and socks5.</li>
<li>Ability to redirect all traffic through the proxy server or only specific
traffic (http, https, ftp).</li>
<li>Ability to redirect all traffic through a proxy server and, after that,
redirect specific traffic through other servers (nested proxies).</li>
<li>Profile switch and config reset aware: if you usually work with a portable
copy of NVDA, you can create various profiles for different environments
(home, work, office1, office2) and manually activate them.</li>
</ul>
<h2>Usage</h2>
<p>This add-on adds a new category to the NVDA settings dialog called
"Proxy". In this category, you will find four settings groups. The first one
allows you to configure a general proxy for all traffic. The other groups
allow you to configure proxy servers only for specific protocols. All groups
have the following fields:</p>
<ul>
<li>Host: hostname or ip address of the proxy server. Leave empty to disable
that particular proxy.</li>
<li>Port: server port.</li>
<li>Username: optional. User name for server authentication.</li>
<li>Password: optional. Password for server authentication. Note that password
is not required for socks4 servers.</li>
</ul>
<p>In addition to the previous fields, the following options are available in
the first settings group:</p>
<ul>
<li>SOCKS proxy type: socks4, socks5 or http can be selected.</li>
<li>Use proxy for dns requests if possible: when this checkbox is checked,
hostnames or domain names will be directly sent to and resolved on the
proxy server. When it is unchecked, names will be resolved locally and the
server will receive only the destination ip address. Note that not all
socks4 proxy servers support this option.</li>
</ul>
<p>Tipically, most users will only have to configure the first settings
group. If you don't know your proxy details, ask your organization network
administrator for more information.</p>
<h2>Limitations</h2>
<ul>
<li>Very limited IPV6 support.</li>
<li>UDP traffic is not supported on all proxy servers.</li>
<li>External DLL libraries won't respect the settings configured in this
add-on.</li>
<li>Only basic authentication is supported for http proxy servers. Digest
authentication is not supported.</li>
<li>In order to redirect all traffic (including https connections) through an
http proxy, the server must support the CONNECT http method.</li>
<li>A "direct connection" mode can't be configured. If you disable a specific
proxy, the system default will be used instead.</li>
</ul>
<h2>Changelog</h2>
<h3>Version 1.2</h3>
<ul>
<li>Compatible with NVDA 2023.1.</li>
<li>For security reasons, minimum NVDA version is set to 2022.4.</li>
<li>Updated translations.</li>
</ul>
<h3>Version 1.1</h3>
<ul>
<li>Compatible with NVDA 2022.1.</li>
<li>For security reasons, minimum NVDA version is set to 2021.3.</li>
<li>Patch socket.getaddrinfo function when "Use proxy for dns requests if
possible" checkbox is checked and a general proxy has been configured.</li>
</ul>
<h3>Version 1.0</h3>
<ul>
<li>Initial release.</li>
</ul>
NVDAUpdate Channel Selectorhttp://addons.nvda-project.org/addons/updateChannel.hu.html2023-10-15T16:25:29Z2022-04-27T09:43:44Z
<ul>
<li>Author: Jose Manuel Delicado</li>
<li>NVDA compatibility: 2022.4 and beyond</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=updateChannel">stable version</a></li>
</ul>
<p>This add-on allows you to download and install the latest NVDA version of
the chosen type without visiting any webpage nor using your web browser. It
is useful when, for example, you want to test new features in a NVDA
snapshot and then return back to the most recent stable release. If you test
regularly NVDA snapshots and you usually install them in your computer, you
will save a lot of time with this add-on. If you prefer testing snapshots in
portable mode keeping your installed copy of NVDA unchanged, this add-on is
for you as well.</p>
<h2>Usage</h2>
<p>You can change the NVDA update channel by going to NVDA menu, Preferences,
Settings, Update channel category. Once you choose the desired channel and
press OK, wait until the next automatic update check or go to NVDA help menu
and choose "Check for updates" option. For now, these are the available
channels:</p>
<ul>
<li>Default: this is the default channel used by your NVDA version. Choosing
this option means the same as disabling the add-on.</li>
<li>Stable: force update channel to stable. Useful when you want to return to
a stable version from a snapshot.</li>
<li>Rc and beta: this is the channel for beta releases. You will receive the
first beta version once it is released. This channel allows you to update
through betas and release candidates.</li>
<li>Alpha (snapshots): choose this option to update to the latest alpha. Alpha
snapshots allows you to test new features, but they are quite
unstable. Please, be careful.</li>
<li>Disable updates (not recommended): this option disables the update
channel. If you check for updates an error message will be
displayed. Remember that you can disable automatic updates from the
General settings category. Use this option only with testing purposes.</li>
</ul>
<p>Information about available updates for each channel will be retrieved in
the background once the settings panel is opened. Press tab to navigate to a
read only edit field, where you can see this information. This information
will be dynamically updated when you change the update channel from the
combo box. If there is an update available for the selected channel, one or
two links will appear next to the edit field:</p>
<ul>
<li>Download: press spacebar on this link to open it in your web browser and
download the latest installer.</li>
<li>View changelog: press spacebar on this link to open the What's new
document in your web browser. For some channels, this link won't be
displayed.</li>
</ul>
<h2>Changelog</h2>
<h3>Version 1.4</h3>
<ul>
<li>Updated translations.</li>
<li>Compatible with NVDA 2023.1.</li>
<li>For security reasons, minimum NVDA version is set to 2022.4.</li>
</ul>
<h3>Version 1.3</h3>
<ul>
<li>Updated translations.</li>
<li>Fixed a bug which prevented creating portable copies from alpha snapshots.</li>
</ul>
<h3>Version 1.2</h3>
<ul>
<li>Updated translations.</li>
<li>Compatible with NVDA 2022.1.</li>
<li>For security reasons, minimum NVDA version is set to 2021.3.</li>
<li>Workaround for a bug in the NV Access server which caused version 2019.2.1
to be offered when updating from alpha to stable.</li>
</ul>
<h3>Version 1.1</h3>
<ul>
<li>Removed unsupported channels.</li>
<li>Updated translations.</li>
<li>Added information of currently available updates to the settings panel.</li>
</ul>
<h3>Version 1.0</h3>
<ul>
<li>Initial version.</li>
</ul>
Application Dictionaryhttp://addons.nvda-project.org/addons/applicationDictionary.hu.html2023-05-10T20:38:32Z2022-03-28T04:38:39Z
<h2>Informations</h2>
<ul>
<li>Authors: Rui Fontes and Ricardo M. Leonarczyk with colaboration of Cyrille
Bougot</li>
<li>Version: 2022.03.26</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=applicationDictionary">stable version</a></li>
<li>Compatibility: NVDA 2019.3 and beyond</li>
</ul>
<h2>Usage</h2>
<p>This simple add-on makes possible to create application-specific
dictionaries for NVDA. To use the add-on, just go to the application for
wich you want a dictionary for, and press NVDA+control+shift+d. The normal
NVDA dictionary dialog will open for you to add entries valid only for the
active application (the application name should appear in the dialog
title). The default add-on shortcut can be changed through NVDA's input
gestures dialog: under configuration node, expand the node that says "Shows
the application-specific dictionary dialog".</p>
<h2>Command</h2>
<p>NVDA+Control+Shift+d</p>
<h2>Automatic update</h2>
<p>This add-on includes an automatic update feature. The check for a new
version will be executed everytime NVDA is loaded. If you want this, go to
NVDA, Preferences, Options and in the add-on category check the check box.</p>
Sound Splitterhttp://addons.nvda-project.org/addons/soundSplitter.hu.html2023-05-10T20:38:32Z2022-01-31T02:30:36Z
<ul>
<li>Authors: Joseph Lee, Luke Davis and contributors</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=soundSplitter">stable version</a></li>
<li>NVDA compatibility: 2022.4 and later</li>
</ul>
<p>This add-on, partly based on Tony's Enhancements by Tony Malykh, adds the
ability to split audio from NVDA and other sounds onto separate audio
channels.</p>
<p>Note: this add-on is not intended to be used in secure screens.</p>
<h2>Commands:</h2>
<ul>
<li>Alt+NvDA+S: toggle sound splitter between enabled with NVDA on the right
channel, NVDA on the left channel, or disabled.</li>
</ul>
<h2>Sound Splitter settings</h2>
<p>You can configure add-on settings from NVDA menu/Preferences/Settings/Sound
Splitter category.</p>
<ul>
<li>Split NVDA sound and applications' sounds into left and right channels:
checkinb this checkbox will enable sound splitting feature.</li>
<li>Switch left and right during sound split: by default, NVDA will be heard
through the right channel if sound splitting is on. You can instead hear
NVDA through the left channel by checking this checkbox.</li>
</ul>
<h2>Version 23.02</h2>
<ul>
<li>NVDA 2022.4 or later is required.</li>
<li>Windows 10 21H2 (November 2021 Update/build 19044) or later is required.</li>
</ul>
<h2>Version 23.01</h2>
<ul>
<li>NVDA 2022.3 or later is required.</li>
<li>Windows 10 or later is required as Windows 7, 8, and 8.1 are no longer
supported by Microsoft as of January 2023.</li>
<li>Updated psutil dependency to 5.9.4.</li>
</ul>
<h2>Version 22.03</h2>
<ul>
<li>NVDA 2021.3 or later is required.</li>
<li>Improved security by not loading the add-on when NVDA is running in secure
mode.</li>
<li>Updated psutil dependency to 5.9.0.</li>
<li>Changed sound splitter toggle command (Alt+NVDA+S) to toggle between NVDA
on the right channel, on the left channel, or sound splitter disabled.</li>
</ul>
<h2>Version 22.02.1</h2>
<ul>
<li>Fixed NVDA and app audio not being restored to both audio channels after
the add-on is disabled or uninstalled.</li>
</ul>
<h2>Version 22.02</h2>
<ul>
<li>Initial version based on Tony Malykh's Tony's Enhancements add-on.</li>
</ul>
Quick Notetakerhttp://addons.nvda-project.org/addons/quickNotetaker.hu.html2024-02-13T14:36:16Z2021-10-08T10:23:30Z
<ul>
<li>Authors: Eilana Benish, Mohammad Suliman</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=quickNotetaker">stable version</a></li>
<li>NVDA compatibility: 2019.3 to 2022.1</li>
</ul>
<p>The Quick Notetaker add-on is a wonderful tool which allows writing notes
quickly and easily anytime and from any app the user is using. Whether the
user is watching a video for example, or participating in a meeting on Zoom,
teams or Google meet, they can easily and smoothly open the notetaker and
take a note. In order to create a quick note, NVDA + Alt + n key combination
can be used, a floating window appears at the top left corner of the screen,
so the note can be typed there.</p>
<p>Every note that is being Created can optionally get the active window title,
and as such, the note content can get the context in which this note was
created by having the note title as the active window title the user was
using. This behavior can be changed from the add-on settings, where the user
can decide whether the active window title is captured when creating a new
note.</p>
<h2>The Notetaker dialog</h2>
<ul>
<li><p>The note edit area: When opening the Notetaker interface the focus will
be in this edit area. Writing with Markdown (a markup language to easily
produce HTML content) is supported also. For more info on Markdown visit
<a href="https://www.markdownguide.org/">the Markdown guide page</a>.</p></li>
<li><p>Preview note: to view the note in an HTML window.</p></li>
<li><p>Copy: to copy the note as is to the clipboard.</p></li>
<li><p>Copy HTML code: to copy the HTML code representing the note. A useful
feature for those who write in Markdown.</p></li>
<li><p>A checkbox to allow saving the note as Microsoft Word also, or updating
the corresponding one if it exists.</p></li>
<li><p>A save and close button.</p></li>
<li><p>A discard button to discard changes when desired. When unsaved changes
exist, a warning message is displayed to the user asking if they are
sure they want to exit and discard their changes.</p></li>
</ul>
<h2>The Notes Manager interface</h2>
<h3>Opening and closing this interface</h3>
<ul>
<li><p>NVDA + Alt + v will launch the Notes Manager interface.</p></li>
<li><p>Using either the Escape key or the close button found at the bottom of
this window will close this interface.</p></li>
</ul>
<h3>The notes list</h3>
<p>The notes are organized in a tabular list which includes:</p>
<ol>
<li><p>The note title: If the note hasn’t got the active window title, the
first line of the note will be the note title displayed in this list.</p></li>
<li><p>Last edited time stamp.</p></li>
<li><p>A preview text of the note content.</p></li>
</ol>
<h3>The options available in Notes Manager interface</h3>
<ul>
<li><p>View note: to view the note in an HTML window.</p></li>
<li><p>Edit note: opens the note to be edited using Notetaker interface.</p></li>
<li><p>Copy note: copies the note content as is to the clipboard.</p></li>
<li><p>Create a Microsoft Word document: Creates a Microsoft Word document
representing this note in case it has no such document.</p></li>
<li><p>Open in Microsoft Word: opens the Microsoft Word document attached to
this note in case it has a one.</p></li>
<li><p>Copy HTML code: copies the HTML code representing this note. A useful
feature for those who write in Markdown.</p></li>
<li><p>Delete note: displays a warning before performing the note deletion.</p></li>
<li><p>New note: the Notetaker interface can be reached from this interface to
create a new note.</p></li>
<li><p>Open settings: opening the add-on settings is also possible from here.</p></li>
<li><p>Close: to close the window.</p></li>
</ul>
<h2>The add-on settings</h2>
<p>The add-on settings are a part of NVDA’s settings interface. To reach those
settings, the user needs to open the NVDA menu using NVDA key + n, choose
preferences > settings, and then arrow down until reaching Quick
Notetaker category.</p>
<p>Using the settings interface the user can:</p>
<ul>
<li><p>Default documents directory: to choose the default directory where Quick
Notetaker documents will be saved. The user can press the “Browse”
button to change the path of this directory.</p></li>
<li><p>Ask me each time where to save the note's corresponding Microsoft Word
document: a checkbox (not checked by default) – to show the dialog for
choosing the location where the document will be saved on each save or
update operation for the note’s Microsoft Word document if such a one
exists.</p></li>
<li><p>Open the note's corresponding Microsoft Word document after saving or
updating: a checkbox (not checked by default) – to allow the user to
choose whether the Microsoft Word document will be opened after a save
or update operation in case the note has such document.</p></li>
<li><p>Capture the active window title when creating a new note: a checkbox
(checked by default) – to allow the note to get the active window title
the user was using when they created the note. This title will be also
the title of the Microsoft Word document for the note in case it has a
one.</p></li>
<li><p>Remember the note taker window size and position: a checkbox (not
checked by default) – to tell the add-on to remember the size and the
position of the Notetaker dialog when creating or editing a note. As
such, when the user opens the dialog next time, the position and the
size will be the same as the last time the dialog was used. The default
position of this dialog is at the top left corner of the screen.</p></li>
<li><p>Auto align text when editing notes (relevant for RTL languages): a
checkbox (checked by default) – to control whether the text when
creating or editing a note should be auto aligned according to the
language used. This is mostly relevant for right to left languages. For
example, if the language used is Arabic or Hebrew, then the text will be
right aligned when this option is chosen, if the language is English or
French, then the text will be left aligned.</p></li>
</ul>
<h2>Keyboard shortcuts</h2>
<ul>
<li><p>NVDA + Alt + n: to open the Notetaker interface.</p></li>
<li><p>NVDA + Alt + v: to open the Notes Manager interface.</p></li>
</ul>
<h3>Keyboard shortcuts in the different interfaces</h3>
<table>
<colgroup>
<col />
<col />
<col />
</colgroup>
<thead>
<tr class="header">
<th>Interface</th>
<th>Command</th>
<th>Keyboard shortcut</th>
</tr>
</thead>
<tbody>
<tr class="odd">
<td>Notetaker</td>
<td>Focus the note edit area</td>
<td>Alt + n</td>
</tr>
<tr class="even">
<td>Notetaker</td>
<td>Align text to the right</td>
<td>Control + r</td>
</tr>
<tr class="odd">
<td>Notetaker</td>
<td>Align text to the left</td>
<td>Control + l</td>
</tr>
<tr class="even">
<td>Notetaker</td>
<td>Preview note in an HTML window</td>
<td>Alt + r</td>
</tr>
<tr class="odd">
<td>Notetaker</td>
<td>Copy</td>
<td>Alt + p</td>
</tr>
<tr class="even">
<td>Notetaker</td>
<td>Copy HTML code</td>
<td>Alt + h</td>
</tr>
<tr class="odd">
<td>Notetaker</td>
<td>Save note as a Microsoft Word document</td>
<td>Alt + w</td>
</tr>
<tr class="even">
<td>Notetaker</td>
<td>Update the note corresponding Microsoft Word document</td>
<td>Alt + w</td>
</tr>
<tr class="odd">
<td>Notetaker</td>
<td>Save and close</td>
<td>Alt + s</td>
</tr>
<tr class="even">
<td>Notetaker</td>
<td>Discard</td>
<td>Alt + d</td>
</tr>
<tr class="odd">
<td>Notetaker</td>
<td>Open notes Manager</td>
<td>Alt + m</td>
</tr>
<tr class="even">
<td>Notes Manager</td>
<td>View note</td>
<td>Alt + v</td>
</tr>
<tr class="odd">
<td>Notes Manager</td>
<td>Edit note</td>
<td>Alt + e</td>
</tr>
<tr class="even">
<td>Notes Manager</td>
<td>Copy note</td>
<td>Alt + p</td>
</tr>
<tr class="odd">
<td>Notes Manager</td>
<td>Open in Microsoft Word (if such a document exists)</td>
<td>Alt + o</td>
</tr>
<tr class="even">
<td>Notes Manager</td>
<td>Create a word document for a saved note</td>
<td>Alt + w</td>
</tr>
<tr class="odd">
<td>Notes Manager</td>
<td>Copy HTML code</td>
<td>Alt + h</td>
</tr>
<tr class="even">
<td>Notes Manager</td>
<td>Delete note</td>
<td>Alt + d</td>
</tr>
<tr class="odd">
<td>Notes Manager</td>
<td>New note</td>
<td>Alt + n</td>
</tr>
<tr class="even">
<td>Notes Manager</td>
<td>Open settings</td>
<td>Alt + s</td>
</tr>
<tr class="odd">
<td>Notes Manager</td>
<td>Close the interface</td>
<td>Alt + c</td>
</tr>
<tr class="even">
<td>The settings interface</td>
<td>Ask me each time where to save the note's corresponding Microsoft Word document</td>
<td>Alt + w</td>
</tr>
<tr class="odd">
<td>The settings interface</td>
<td>Open the note's corresponding Microsoft Word document after saving or updating</td>
<td>Alt + o</td>
</tr>
<tr class="even">
<td>The settings interface</td>
<td>Capture the active window title when creating a new note</td>
<td>Alt + c</td>
</tr>
<tr class="odd">
<td>The settings interface</td>
<td>Remember the note taker window size and position</td>
<td>Alt + r</td>
</tr>
<tr class="even">
<td>The settings interface</td>
<td>Auto align text when editing notes (relevant for RTL languages)</td>
<td>Alt + t</td>
</tr>
</tbody>
</table>
<h2>Acknowledgements</h2>
<ul>
<li><p>The add-on comes bundled with Pandoc, a wonderful tool which allows
converting documents between different formats. Without this tool the
add-on won’t be able to offer the capabilities it offers. For more info
on Pandoc <a href="https://pandoc.org/">visit the Pandoc homepage</a>.</p></li>
<li><p>The add-on also relies on a Python Markdown package called
markdown2. For more info on this package <a href="https://github.com/trentm/python-markdown2">visit the package GitHub
page</a>.</p></li>
<li><p>A great thanks to NV Access, add-on authors, and contributors! Several
parts of the add-on were inspired by your magnificent work and effort,
so please keep up this brilliant ecosystem and the cooperation.</p></li>
</ul>
<h2>Changes for 1.1</h2>
<ul>
<li>This release adds compatibility for NVDA 2022.1 and above;</li>
<li>Fixed a bug with displaying the note title in Notes manager;</li>
<li>Added German and Chinese translation;</li>
<li>To elaborate on the bug with displaying the note title, the previous
version included a bug where the whole text of the note was displayed to
be the title of the note, which wasn't the intention of the
developers. The bug is now fixed;</li>
<li>the newly created notes will have their title as the first line of the
note;</li>
<li>For existing notes, the user can select the note from the notes list in
Notes Manager, click "Edit note", and then click "Save and close";</li>
<li>We made it possible to be able to edit the note even without needing to
change the content to allow the user to overcome this bug.</li>
</ul>
<h2>Changes for 1.0</h2>
<p>Initial version.</p>
Ignore Blanks Indentation Reportinghttp://addons.nvda-project.org/addons/ignoreBlanksIndentationReporting.hu.html2024-02-13T14:35:06Z2021-08-10T16:58:00Z
<ul>
<li>Author: Samuel Kacer</li>
<li>NVDA compatibility: 2021.1 and beyond</li>
<li>Download <a>stable version</a></li>
</ul>
<p>This is an NVDA addon that alters the reporting of indentation by
disregarding blank lines when deciding whether to report changes in
indentation. It is best understood by contrasting with normal behaviour with
an example.</p>
<p>Consider this example:</p>
<pre><code>def foo():
x = 42
return x
def bar():
</code></pre>
<p>The current behaviour of NVDA is to report indentation changes for any line
where the indentation has changed, even if the line is blank. So, the
example would be read like:</p>
<pre><code>def foo():
tab x = 42
no indent blank
tab return x
no indent blank
def bar():
</code></pre>
<p>The disadvantage for this behaviour is that for most programming languages,
like python, a blank line has no semantic significance and is just used to
visually separate lines of code with no change to the code's
meaning. Therefore, by reporting the change of indentation upon entering a
blank line and then reporting it again after landing on the next line is
just noise that makes it harder to focus on understanding the code.</p>
<p>This addon aims to improve on the behaviour by ignoring blank lines when
computing indentation speech, thus the example is read like this instead:</p>
<pre><code>def foo():
tab x = 42
blank
return x
no indent def bar():
</code></pre>
<h2>Change log</h2>
<h3>v0.4</h3>
<ul>
<li>support NVDA version 2022.3+, including 2023.1</li>
</ul>
<h3>version 0.3</h3>
<ul>
<li>support NVDA version 2021.3+</li>
<li>tested compatibility with NVDA 2022.1</li>
</ul>
<h3>version 0.2</h3>
<ul>
<li>fix crash while reading math content</li>
</ul>
<h3>version 0.1</h3>
<ul>
<li>Initial release</li>
</ul>
<h2>Source code</h2>
<p><a href="https://github.com/SamKacer/IgnoreBlanksIndentation">Source code repository</a></p>
<p>https://www.nvaccess.org/addonStore/legacy?file=ignoreBlanksIndentationReporting</p>
Search Withhttp://addons.nvda-project.org/addons/searchWith.hu.html2024-02-13T14:36:00Z2021-08-05T17:27:48Z
<ul>
<li>Author: Ibrahim Hamadeh</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=searchwith">Stable Version</a></li>
<li>NVDA compatibility: 2019.3 and beyond</li>
</ul>
<p>This addon helps you to search text, via various search engines. Let no text
selected, and press the gesture of the addon, a dialog will be displayed,
with an edit box to enter a search query, to search with Google press enter,
or tab to search with other engins.</p>
<p>And if you want to search for selected text, select some text and press
once, a menu will be displayed with various search engines to choose. and
you can if you like, press the gesture twice to search selected text with
Google directly.</p>
<p>The Default gesture for the addon is: NVDA+ Windows+ S. If the keystroke do not work for you, or conflict with other keystroke, you can as always add a gesture or change the existent one going to: NVDA menu>preferences>inputGestures>Search With category.</p>
<h2>Usage</h2>
<ul>
<li>If you want to enter a search query, just press the addon gesture. A
dialog will be displayed, with an edit field to enter the search term.</li>
<li>Want to search with Google? just press enter.</li>
<li>Otherwise tab to Other Engines button, and give it a space, a popup menu
will show up, with various search engines to choose. Yahoo, Bing,
DuckDuckGo, and Youtube. This is the default menu, and you may modify it
from addon's setting panel.</li>
<li>Another way to use the addon, is by selecting some text. And on Pressing
the addon's gesture, or any other you have assigned to it, a virtual menu
will be displayed with various search engines, either the default menu, or
any other you have tailed to your needs.</li>
<li>Choose one and press enter, the default browser will open displaying
search results. or, if you want to search with Google directly, press the
gesture twice, and you are done.</li>
<li>Want to trigger search menu specifically for clipboard or last spoken
text? OK, then you can from input gestures dialog, assigned a gesture for:
<ul>
<li>Trigger search menu for clipboard text, and pressed twice searches
that text by Google directly.</li>
<li>Trigger search menu for last spoken text, and pressed twice searches
that text by Google directly.</li>
</ul>
</li>
<li>Want to modify Search with menu? Yes you can do that from the setting
panel, and adjust the menu to fit to your mood and needs.</li>
<li>You can from there, add to Search with menu, other available search
engines. And you can if you like, remove an item from it, move item up,
move item down, or return and set menu to default state.</li>
<li>If you want these modifications to be permanent, you have to save
configuration after wards.</li>
<li>Want to search Google using other language options?</li>
<li><p>Then, go to Search With category in setting panels, from the cumbo box
there, you can choose search Google either:</p>
<ol>
<li>Using browser settings and language.</li>
<li>Using NVDA language.</li>
<li>Using windows language.</li>
</ol>
</li>
<li><p>Moreover, you have the option to choose the default query in Search with
dialog. From the Options for default query combo box in setting panel, you
can choose either</p>
<ul>
<li>Leave blank</li>
<li>Use clipboard text</li>
<li>Use last spoken text</li>
</ul>
</li>
<li><p>And if clipboard or last spoken text is chosen, text in search box will be
displayed selected, so that you can easily override it.</p></li>
<li>Now let's choose the target language for translate engines, Google
Translate and DeepL translator.</li>
<li>Still in setting panel, under Translation engines group, there are two
combo boxes, one for Google Translate and the other for DeepL
Translator. Choose the target language you want for each of them and you
are done.</li>
<li>Lastly, especially for advanced users</li>
<li>You can through a check box in setting panel, choose if you want to
preserve your data folder upon installing a new version. And this means
that your data will be sustained, but added to it the newly entries in the
new version.</li>
</ul>
<p>And that's it, hope to search for good and find it, happy searching!</p>
<h3>Changes for 2.5.3</h3>
<ul>
<li>Add DeepL translator to available engines.</li>
<li>Add two combo boxes in setting panel, to choose target language for Google
translate and DeepL translator.</li>
</ul>
<h3>Changes for 2.3</h3>
<ul>
<li>Now choosing to preserve data from setting panel, does not means that you
will not get the new data entries, but the new entries in the new version,
will be merged and added to your old data file.</li>
<li>Update last tested version to 2023.1 to comply with NVDA version 2023.1.</li>
</ul>
<h3>Changes for 2.0</h3>
<ul>
<li>Disable the addon in secure mode.</li>
<li>Update last tested version to 2022.1, to comply with recent addon api
version.</li>
</ul>
<h3>Changes for 1.8</h3>
<ul>
<li>Add a check box in setting panel, to let advanced users preserve their
data folder.</li>
<li>Add two new entries in input gestures:
<ul>
<li>trigger search menu for clipboard text, press twice searches Google
directly.</li>
<li>Trigger search menu for last spoken text, press twice searches Google
directly.</li>
</ul>
</li>
</ul>
<h3>Changes for 1.7</h3>
<ul>
<li>Make a combo box in addon's setting, to choose an option for default query
in search with dialog.</li>
<li>You can select either Leave blank, Use clipboard text, or Use last spoken
text.</li>
</ul>
<h3>Changes for 1.2</h3>
<ul>
<li>Add more sites that could be added to menu, such as Stackoverflow,
Stackexchange, GoogleBooks and others.</li>
<li>Add the options to use last spoken text as default query, in search with
dialog.</li>
</ul>
<h3>Changes for 0.4</h3>
<ul>
<li>Add a dialog if no text selected, to enter a search query.</li>
<li>Make possible to modify Search with menu from setting panel, to fit to
user needs.</li>
</ul>
<h3>Changes for 0.3</h3>
<ul>
<li>Add setting panel, giving more language options in Google search.</li>
</ul>
<h3>Changes for 0.1</h3>
<ul>
<li>Initial version</li>
</ul>
Say Product Name and Versionhttp://addons.nvda-project.org/addons/sayProductNameAndVersion.hu.html2024-03-20T01:25:51Z2021-08-05T12:29:53Z
<ul>
<li>Author: Luke Davis <a href="mailto:XLTechie@newanswertech.com">XLTechie@newanswertech.com</a>, Patrick ZAJDA
<a href="mailto:patrick@zajda.fr">patrick@zajda.fr</a></li>
<li>NVDA compatibility: 2017.3 through 2024.X</li>
<li>Download <a>stable version</a></li>
</ul>
<p>This <a href="https://nvaccess.org/">NVDA</a> add-on adds a shortcut to announce
product name and version of the foreground application, or copies this
information to the clipboard.</p>
<ul>
<li>Shortcut: <code>NVDA+shift+v</code></li>
<li>Press it twice to copy product name and version to the clipboard.</li>
<li>Press it three times to copy only the version to the clipboard.</li>
</ul>
<p>This shortcut may be remapped in the Tools category of NVDA's Input
Gestures.</p>
<p>If you like this add-on and are willing to help others decide whether it is
useful, please leave a <a href="https://github.com/nvaccess/addon-datastore/discussions/2683">review</a>.</p>
<p>For change history, please read the <a>changelog</a>.</p>
<h3>Tips</h3>
<ul>
<li>To find out the Windows version with this add-on, you can focus on any
Windows component (such as desktop, the start menu, the run dialog, etc.),
and press the shortcut key. Note, that this does not give you the release
version name, such as "23H3". Instead it gives you something closer to the
build version, as you would get from the second line of the "<code>winver</code>"
command.</li>
<li>To get the NVDA version, open any NVDA dialog or menu, and press this
add-on's shortcut key. For example, press <code>NVDA+n</code> to open the NVDA menu,
then press <code>NVDA+shift+v</code>, then press <code>escape</code> to leave the menu.</li>
</ul>
<p>https://www.nvaccess.org/addonStore/legacy?file=sayProductNameAndVersion</p>
<p>https://github.com/opensourcesys/sayProductNameAndVersion/blob/master/changelog.md#readme</p>
Event Trackerhttp://addons.nvda-project.org/addons/evtTracker.hu.html2024-03-22T17:52:59Z2021-07-21T09:20:37Z
<h1>Event Tracker</h1>
<ul>
<li>Author: Joseph Lee, Thiago Seus</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=evtTracker">stable version</a></li>
<li>NVDA compatibility: 2022.4 and later</li>
</ul>
<p>This add-on outputs information about objects for which events were
fired. Properties recorded in debug log mode include object type, name,
role, event, app module, and accessibility API specific information such as
accName for IAccessible object and Automation Id for UIA objects.</p>
<p>Notes:</p>
<ul>
<li>This add-on is designed for developers and power users needing to track
events coming from apps and various controls.</li>
<li>In order to use the add-on, NVDA must be logging in debug mode (configured
from general settings/logging level, or restart with debug logging
enabled).</li>
<li>It might be possible that add-ons loaded earlier than Event Tracker may
not pass on the event to other add-ons, including Event Tracker. If this
happens, Event Tracker will not be able to log events.</li>
<li>Events are handled from global plugins, app modules, tree interceptors,
and NVDA objects, in that order.</li>
</ul>
<h2>Events and their information</h2>
<p>The following events are tracked and recorded:</p>
<ul>
<li>Focus manipulation: gain focus, lose focus, focus entered, foreground</li>
<li>Changes: name, value, state, description, live region</li>
<li>Other events: alert</li>
<li>UIA events: controller for, drag drop and drop target effects, element
selected, item status, layout invalidated, notification, system alert,
text change, tooltip open, window open</li>
</ul>
<p>For each event, the following information will be recorded:</p>
<ul>
<li>Event name</li>
<li>Object</li>
<li>Object name</li>
<li>Object role</li>
<li>Object value or state depending on events</li>
<li>App module</li>
<li>For IAccessible objects: acc name, child ID</li>
<li>For UIA objects: Automation Id, class name, notification properties if
recording notification event information, child count for layout
invalidated event, properties for item status, drag drop, and drop target
effect if defined</li>
</ul>
<p>You can also assign a gesture to view the events on a list (NVDA
menu/Preferences/Input gestures, Event Tracker category). The list saves up
to 100 latest events processed.</p>
<p>If you find this add-on useful, please <a href="https://github.com/nvaccess/addon-datastore/discussions/2717">review it</a> in the NVDA Add-on
Store.</p>
<h2>Version 24.1.0</h2>
<ul>
<li>NVDA 2024.1 compatibility.</li>
</ul>
<h2>Version 23.02</h2>
<ul>
<li>NVDA 2022.4 or later is required.</li>
<li>Windows 10 21H2 (November 2021 Update/build 19044) or later is required.</li>
<li>Alert event (mostly for IAccessible objects) will be tracked.</li>
</ul>
<h2>Version 23.01</h2>
<ul>
<li>NVDA 2022.3 or later is required.</li>
<li>Windows 10 or later is required as Windows 7, 8, and 8.1 are no longer
supported by Microsoft as of January 2023.</li>
</ul>
<h2>Version 22.12</h2>
<ul>
<li>Added events list dialog (command unassigned) to list up to 100 recent
events recorded by the add-on (Thiago Seus).</li>
<li>Additional event information such as UIA notification properties are
recorded at the same time as events.</li>
</ul>
<h2>Version 22.10</h2>
<ul>
<li>NVDA 2022.2 or later is required due to security.</li>
<li>The following UIA property changes are tracked: drag drop effect, drop
target effect.</li>
<li>UIA item status property text is logged.</li>
<li>NVDA will no longer play error tones or appear to do nothing if an object
does not define a window class name.</li>
</ul>
<h2>Version 22.06</h2>
<ul>
<li>NVDA 2021.3 or later is required due to security.</li>
</ul>
<h2>Version 21.10</h2>
<ul>
<li>NVDA 2021.2 or later is required due to changes to NVDA that affects this
add-on.</li>
<li>UIA layout invalidated event will be tracked.</li>
<li>Object role and states information will resemble developer info found in
more recent NVDA releases.</li>
</ul>
<h2>Version 21.07</h2>
<ul>
<li>Initial release.</li>
</ul>
Braille bevitel PC billentyűzetrőlhttp://addons.nvda-project.org/addons/pcKbBrl.hu.html2024-02-13T14:35:51Z2021-07-08T20:09:59Z
<ul>
<li>Author: NV Access Limited, Noelia Ruiz Martínez</li>
<li>Copyright: 2012-2023 NV Access Limited, Noelia Ruiz Martínez</li>
<li>License: GNU General Public License version 2.0</li>
<li><a href="https://www.nvaccess.org/addonStore/legacy?file=pckbbrl-o">version 2014.1</a> (compatible with NVDA 2017.3 to 2019.2)</li>
</ul>
<p>This NVDA add-on allows braille to be entered via the PC keyboard.
Currently, the following keyboard layouts are supported:</p>
<ul>
<li>English QWERTY keyboard.</li>
<li>French (France).</li>
<li>German (Germany).</li>
<li>Italian (Italy).</li>
<li>Persian.</li>
<li>Portuguese (Portugal).</li>
<li>Spanish (Spain and Mexico).</li>
<li>Turkish.</li>
</ul>
<h2>How to configure</h2>
<p>The add-on can be configured from its category in the NVDA's settings
dialog, under NVDA's menu, Preferences submenu. A gesture for opening the
add-on settings panel can be assigned from Input gestures dialog,
configuration category.</p>
<p>Check the corresponding checkbox if you want to type using only one hand, or
ensure it's not checked if you prefer to type using the standard mode (two
hands).</p>
<p>You can also select if NVDA should speak a single typed dot (using )the
feature of "one hand mode").</p>
<p>If you want dots to be sent automatically when typing with one hand, use the
spin control to set a timeout greater than 0.</p>
<p>In addition, you can set the characters to send, clear and compose dots when
typing with one hand, as well as characters to be ignored in one hand or
standard mode.</p>
<p>It's also possible to restore defaults in the add-on settings panel.</p>
<h2>Használat</h2>
<ol>
<li>Press NVDA+0 to enable braille input. This gesture can be changed from
Input gestures dialog, Braille category.</li>
<li><p>Type braille by pressing keys together on the PC keyboard as if it were a
braille keyboard.</p>
<ul>
<li><p>If you want to enter text using two hands, use the following keys if you
work with a QWERTY English keyboard, or the keys located at the
corresponding positions in other layouts:</p>
<ul>
<li>f, d and s for dots 1, 2 and 3 respectively.</li>
<li>j, k and l for dots 4, 5 and 6 respectively.</li>
<li>Use the keys a and ; (semi-colon) for dots 7 and 8, respectively.</li>
<li>You can also use the keys on the row above; i.e. q, w, e, r, u, i, o and
p.</li>
</ul>
</li>
<li><p>If you want to type text using one hand, you can compose characters
pressing keys simultaneously or in several keystrokes, adding the dots
corresponding to the desired character. Press g or h to type the
character when you have added all its dots. If you make a mistake
building a character, you can clear the dots before typing it by pressing
t or y. The keys used in QWERTY English keyboard are the following:</p>
<ul>
<li>Left hand: f, d, s, r, e, w, a, q for dots 1, 2, 3, 4, 5, 6, 7 and 8.</li>
<li>Right hand: j, k, l, u, i, o, ; (semicolon), p for dots 1, 2, 3, 4, 5,
6, 7 and 8.</li>
</ul>
</li>
</ul>
</li>
<li><p>You can press most other keys as normal, including space, backspace,
enter and function keys. Take care about not pressing alt+shift, since
changing the keyboard layout may affect the entered dots.</p></li>
<li>Press space bar in combination with braille dots to move the system
cursor (or report the current line), just if you were using a braille
display. For example, space+dot1 to emulate upArrow, space+dot4+dot5+dot6
to emulate control+end, space+dot1+dot4 to report the current line, etc.</li>
<li>Press NVDA+0 to disable braille input.</li>
</ol>
<h2>Fontos megjegyzések</h2>
<p>This add-on uses NVDA's in-built braille input support. Therefore, the
input table used is that specified in NVDA's Braille Settings dialog.</p>
<p>Egyes billentyűzetek, különösen a laptop billentyűzetek nem tudnak kezelni
bizonyos billentyűkombinációkat. Ilyen esetekben az érintett gombokat
egyszerűen figyelmen kívül hagyja a program. Sajnos nem lehet megoldani a
problémát, mert a Windows, és az NVDA az érintett gombnyomásokat egyszerűen
nem fogadja. Egyes esetekben a felső sor gombjai egy vagy két kéz
segítségével inkább működhetnek.</p>
<h2>Changes for 28.0.0</h2>
<ul>
<li>Changed default values for One hand mode.</li>
</ul>
<h2>Changes for 2023.02.23</h2>
<ul>
<li>Added ability to configure keys used to type dots in one hand mode.</li>
<li>Now you can configure keys that should be ignored when typing in braille.</li>
<li>A restore to defaults button has been added to the add-on settings panel.</li>
<li>Compatible with NVDA 2023.1.</li>
</ul>
<h2>Changes for 2022.1</h2>
<ul>
<li>Added ability to configure keys to send and clear dots when writing with
one hand. Also, it's possible to set a timeout to send dots automatically,
without pressing confirmation keys.</li>
</ul>
<h2>Changes for 2021.1</h2>
<ul>
<li>NVDA won't try to speak dots when One hand mode is not active or if space
has been pressed.</li>
<li>Compatible with NVDA 2021.1.</li>
</ul>
<h2>Changes for 2020.1</h2>
<ul>
<li>You can press space bar in combination with braille dots to emulate
gestures, similar to commands available in braille displays.</li>
<li>Added an option to speak single dots typed in one hand mode.</li>
</ul>
<h2>Közreműködők</h2>
<ul>
<li>James Teh</li>
<li>Noelia.</li>
<li>Mohammadreza Rashad</li>
<li>Cagri Dogan</li>
<li>Bernd Dorer</li>
<li>Ângelo Abrantes</li>
<li>Cyrille Bougot</li>
<li>Abdel.</li>
</ul>
Windows Magnifierhttp://addons.nvda-project.org/addons/winMag.hu.html2024-02-15T21:52:02Z2021-07-08T08:49:47Z
<ul>
<li>Author: Cyrille Bougot</li>
<li>NVDA compatibility: 2019.2.1 and beyond</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=winmag">stable version</a></li>
</ul>
<p>This add-on improves the use of Windows Magnifier with NVDA.</p>
<h2>Features</h2>
<ul>
<li>Allows to report the result of some native Magnifier keyboard commands.</li>
<li>Allows to reduce the cases where table navigation commands conflict with
Magnifier's commands.</li>
<li>Adds some keyboard shortcuts to toggle various native options of the
Magnifier.</li>
<li>Allow to save and restore the configuration parameters of the Magnifier.</li>
<li>Adds some extra features that are not provided by Windows Magnifier (mouse
to view, Magnifier window not on top)</li>
</ul>
<h2>Settings</h2>
<p>The setting panel of Windows Magnifier add-on allows to configure how NVDA
reacts to native Windows Magnifier commands. You may want to have more or
less commands reported according to what you are able to see. The panel
also contains an option to modify the behaviour of Windows Magnifier control
window.</p>
<p>This panel may be opened choosing Preferences -> Settings in the NVDA menu and then selecting the Windows Magnifier category in the Settings window.
The keyboard shortcut NVDA+Windows+O then O also allows to open this settings panel directly.</p>
<p>The panel contains the following options:</p>
<ul>
<li><p>Report view moves: controls what is reported when you move the view with
Control+Alt+Arrows commands. The three options are:</p>
<ul>
<li>Off: Nothing is reported.</li>
<li>With speech: a speech message indicates the position of the zoomed
view on the dimension the view is being moved.</li>
<li>With tones: a tone is played and its pitch indicates the position of
the zoomed view on the dimension the view is being moved.</li>
</ul>
<p>This option does not affect docked view mode.</p></li>
<li><p>Report screen edges: controls what is reported when you reach the edges of
the screen while moving the view with Control+Alt+Arrows commands. The
three options are: Off, With speech and With tones. This option does not
affect docked view mode.</p></li>
<li>Volume of the tones reporting the position of the view: allows to define
the volume of the tones if you have selected to report view moves or
screen edges with tones.</li>
<li>Report turn on or off: If checked, the Magnifier's state is reported when
you use Windows++ or Windows+Escape commands to turn it on or off.</li>
<li>Report zoom: If checked, the Magnifier's zoom level is reported when you
use Windows++ or Windows+- zoom commands.</li>
<li>Report color inversion: If checked, the color inversion state is reported
when you use the control+Alt+I toggle command.</li>
<li>Report view change: If checked, the view type is reported when you use a
command that changes the view type (Control+Alt+M, Control+Alt+F,
Control+Alt+D, Control+Alt+L)</li>
<li>Report lens or docked window resizing: If checked, a message is reported
when you use the resizing commands (Alt+Shift+Arrows). In docked window
mode, the height or the width is reported. In lens mode, the new
dimension cannot be reported for now. These resizing command do not seem
to be available on all versions of Windows; if your Windows version does
not support them, you should keep this option unchecked.</li>
<li><p>In documents and list views, pass control+alt+arrows shortcuts to Windows
Magnifier: There are three possible choices:</p>
<ul>
<li>Never: The command is not passed to Windows Magnifier and standard
NVDA table navigation can operate. When used in documents out of a
table, the Control+Alt+Arrow command reports a "Not in a table" error
message. This is the standard behaviour of NVDA without this add-on.
You can still use NVDA+Windows+O then arrows to move the magnified
view.</li>
<li>Only when not in table: In table or in list views, Control+Alt+Arrow
commands perform standard table navigation. When used in documents
out of a table, Control+Alt+Arrow commands perform standard Magnifier
view move commands. If you still want to move Windows Magnifier view
while in table or in list view, you will need to press NVDA+F2 before
using Control+Alt+Arrow commands or alternately use NVDA+Windows+O
then arrows. This option is the best compromise if you want to use
Control+Alt+Arrow for both Magnifier and table navigation.</li>
<li>Always: Control+Alt+Arrow commands moves the Magnifier's view in any
case. This option may be useful if you do not use Control+Alt+Arrow
to navigate in table, e.g. because you have changed table navigation
shortcuts in NVDA or because you exclusively use <a href="https://addons.nvda-project.org/addons/easyTableNavigator.en.html">Easy table
navigator</a> add-on for table navigation.</li>
</ul>
</li>
<li><p>Keep Windows Magnifier command window always on top: If unchecked, the
Magnifier's control window will not be kept always on top of other
windows.</p></li>
</ul>
<h2>Commands added by this add-on</h2>
<p>In addition to native Magnifier commands, this add-on provide additional
commands:</p>
<ul>
<li>Commands that allow to control Magnifier's options without opening its
configuration page.</li>
<li>Extra commands specific to this add-on.</li>
</ul>
<p>All these additional commands are accessible through the Magnifier layer
command NVDA+Windows+O:</p>
<ul>
<li>NVDA+Windows+O then C: Toggles on or off caret tracking.</li>
<li>NVDA+Windows+O then F: Toggles on or off focus tracking.</li>
<li>NVDA+Windows+O then M: Toggles on or off mouse tracking.</li>
<li>NVDA+Windows+O then T: Toggles on or off tracking globally. When tracking
is toggled on again, it is set to the last active tracking configuration
before tracking was toggled off.</li>
<li>NVDA+Windows+O then S: Toggles on or off smoothing.</li>
<li>NVDA+Windows+O then R: Switches between mouse pointer tracking modes
(within the edge of the screen or centered on the screen); this feature is
only available on Windows 10 build 17643 or higher.</li>
<li>NVDA+Windows+O then X: Switches between text cursor tracking modes (within
the edge of the screen or centered on the screen); this feature is only
available on Windows 10 build 18894 or higher.</li>
<li>NVDA+Windows+O then shift+P: Saves the current configuration parameters of
the magnifier to NVDA's configuration.</li>
<li>NVDA+Windows+O then P: Restores the current configuration parameters of
the magnifier from NVDA's configuration. If no configuration parameters
has been previously saved to NVDA's configuration, the default
configuration parameters of Windows Magnifier are restored instead.</li>
<li>NVDA+Windows+O then Arrows: Move the magnified view.</li>
<li>NVDA+Windows+O then V: Moves the mouse cursor in the center of the
magnified view (command not available in docked view mode).</li>
<li>NVDA+Windows+O then W: Switches on or off the mode allowing to keep
Windows Magnifier's control window always on top of the other ones. This
feature is only available for installed versions of NVDA.</li>
<li>NVDA+Windows+O then O: Opens Windows Magnifier add-on settings.</li>
<li>NVDA+Windows+O then H: Displays help on Magnifier layer commands.</li>
</ul>
<p>There is no default direct gesture for each command, but you can attribute
one normally in the input gesture dialog if you wish. The same way, You can
also modify or delete the Magnifier layer access gesture (NVDA+Windows+O).
Yet, you cannot modify the shortcut key of the Magnifier layer sub-commands.</p>
<h2>Magnifier's native commands</h2>
<p>The result of the following Magnifier native commands may be reported by
this add-on, according to its configuration:</p>
<ul>
<li>Start Magnifier: Windows++ (on alpha-numeric keyboard or on numpad)</li>
<li>Quit Magnifier: Windows+Escape</li>
<li>Zoom in: Windows++ (on alpha-numeric keyboard or on numpad)</li>
<li>Zoom out: Windows+- (on alpha-numeric keyboard or on numpad)</li>
<li>Toggle color inversion: Control+Alt+I</li>
<li>Select the docked view: Control+Alt+D</li>
<li>Select the full screen view: Control+Alt+F</li>
<li>Select the lens view: Control+Alt+L</li>
<li>Cycle through the three view types: Control+Alt+M</li>
<li>Resize the lens with the keyboard: Shift+Alt+Left/Right/Up/DownArrow Note:
although this does not seem to be documented, this shortcut seems to have
been withdrawn in recent Windows versions such as Windows 10 2004.</li>
<li>Move the magnified view: Control+Alt+Arrows</li>
</ul>
<p>Here is also a list of other Magnifier native commands, just for
information:</p>
<ul>
<li>Control+Alt+mouseScrollWheel: Zooms in and out using the mouse scroll
wheel.</li>
<li>Control+Windows+M: Opens the Magnifier's settings window.</li>
<li>Control+Alt+R: Resizes the lens with the mouse.</li>
<li>Control+Alt+Space: Quickly shows the entire desktop when using full screen
view.</li>
</ul>
<p>None of the Magnifier native commands can be modified.</p>
<h2>Notes</h2>
<ul>
<li>For computers equipped with an Intel graphic card, control+alt+arrow
(left/right/up/down) are also shortcuts to modify the orientation of the
screen. These shortcut are enabled by default and conflict with Windows
Magnifiers shortcuts to move the view. You will need to disable them to
be able to use them for the Magnifier. They can be disabled in the Intel
control panel or in the Intel menu present in the system tray.</li>
<li><p>Depending on your Windows version, Alt+Shift+Arrow are Windows Magnifier
shortcuts to resize the magnified view (lens or docked). When Magnifier
is active (even in full screen mode), these shortcuts are captured by
Magnifier and cannot be passed to the application, even if you press
NVDA+F2 before. To use these shortcuts in the current application, you
need to quit the Magnifier (Windows+Escape) and re-open it after
(Windows++). For example in MS word, to decrease title level:</p>
<ul>
<li>Press Windows+Escape to quit Magnifier.</li>
<li>Press Alt+Shift+RightArrow to decrease current title level.</li>
<li>Press Windows++ to re-open the Magnifier.</li>
</ul>
</li>
<li><p>For more information about Windows Magnifier's features and shortcuts, you
may want to consult the following pages:</p>
<ul>
<li><a href="https://support.microsoft.com/en-us/help/11542/windows-use-magnifier-to-make-things-easier-to-see">Use Magnifier to make things on the screen easier to
see</a></li>
<li><a href="https://support.microsoft.com/en-us/help/13810">Windows keyboard shortcuts for accessibility</a></li>
</ul>
</li>
<li><p>This add-on has not been tested in multi-screen environment and there are
chances that some feature are not working in this environment. If you are
using multi-screen environment and want it to be supported, please contact
me to have it implemented.</p></li>
<li>More generally, do not hesitate to contact me on the <a href="https://github.com/CyrilleB79/winMag">GitHub page</a> of
this add-on or directly by e-mail.</li>
</ul>
<h2>Change log</h2>
<h3>Version 3.5</h3>
<ul>
<li>Prepares compatibility with NVDA 2024.1.</li>
<li>Addresses potential security issues related to <a>GHSA-xg6w-23rw-39r8</a>
when using the add-on with older versions of NVDA. However, it is
recommended to use NVDA 2023.3.3 or higher.</li>
<li>Note: From now on, translation updates will not appear anymore in the
change log.</li>
</ul>
<h3>Version 3.4</h3>
<ul>
<li>The "move mouse to view" command works again</li>
<li>Updated localizations.</li>
</ul>
<h3>Version 3.3</h3>
<ul>
<li>Compatibility reduced to NVDA 2019.2.1 and beyond. The last compatible
versions with NVDA 2018.3 are the <a>3.2</a> (partially compatible) and
<a>1.1</a> (fully compatible)</li>
<li>Fixed a bug in the settings panel with NVDA 2019.2.1.</li>
</ul>
<h3>Version 3.2</h3>
<ul>
<li>Removed the dev channel.</li>
<li>Updated localizations.</li>
</ul>
<h3>Version 3.1</h3>
<ul>
<li>Fixed an issue preventing the Magnifier's command window from being
restored on top.</li>
<li>Fixed an issue preventing the add-on to run on NVDA 2019.2.1.</li>
<li>Updated localizations.</li>
</ul>
<h3>Version 3.0</h3>
<ul>
<li>Pressing the zoom buttons in the Magnifier window (with the keyboard) now
reports the new zoom level.</li>
<li>The parameter controlling if Magnifier control window remains always on
top is now stored in configuration; this means that this parameter is
remembered when restarting NVDA and can be enabled or not depending on the
active profile.</li>
<li>Fixed a bug causing unexpected screen curtain de-activation when using
move to view or move view commands.</li>
<li>Option alwaysOnTop setting will now be honoured also when changing
magnification mode.</li>
<li>Added ability to save and restore Windows Magnifier's config in NVDA's
config.</li>
<li>Compatibility with NVDA 2023.1.</li>
<li>Clarify which type of tracking is re-enabled when tracking is toggled on
again.</li>
<li>Updated localizations.</li>
</ul>
<h3>Version 2.0</h3>
<ul>
<li>The view can be moved with arrows while in Windows Magnifier layer.</li>
<li>Capability to keep the Magnifier commands Window always on top or not.</li>
<li>Added "Report screen edges" feature.</li>
<li>Volume setting of tones when using move view commands.</li>
<li>Reporting view moves and mouse to view commands are now supported in Lens
mode.</li>
<li>Compatibility with NVDA 2022.1.</li>
<li>Fixed a bug that sometimes incorrectly reported that the Magnifier was not
working upon script call.</li>
<li>The release is now performed thanks to a GitHub action instead of
appVeyor.</li>
<li>Updated localizations.</li>
</ul>
<h3>Version 1.1</h3>
<ul>
<li>Added localizations.</li>
</ul>
<h3>Version 1.0</h3>
<ul>
<li>Initial release.</li>
</ul>
<p>https://github.com/CyrilleB79/winMag/releases/download/V1.1/winMag-1.1.nvda-addon</p>
<p>https://github.com/CyrilleB79/winMag/releases/download/V3.2/winMag-3.2.nvda-addon</p>
<p>https://github.com/nvaccess/nvda/security/advisories/GHSA-xg6w-23rw-39r8#event-132994</p>
Direct Linkhttp://addons.nvda-project.org/addons/directLink.hu.html2023-05-10T20:38:32Z2021-06-29T07:11:59Z
<ul>
<li>Author: Fawaz Abdul Rahman</li>
<li>Version: 1.0</li>
<li>NVDA compatibility: 2019.3 and beyond</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=directlink">stable version</a></li>
</ul>
<h2>Functionality</h2>
<p>The purpose of the addon is to convert the Dropbox, Google Drive or oneDrive
(both personal and business) links to a direct link, furthermore, it
generates a direct link to a WhatsApp chat with the chosen selected phone
number.</p>
<h2>Usage</h2>
<ul>
<li>Select or copy a shared Dropbox, Google Drive or oneDrive link</li>
<li>Press alt+NVDA+l to convert the link. The resulting URL will be in your
clipboard.</li>
<li>Similarly for the phone number, copy or select the number you like to chat
with or share and press the same shortcut (alt+NVDA+L).</li>
<li>if you like to open the resulted link in your browser, press
alt+NVDA+shift+l.</li>
</ul>
<h2>Why the direct link?</h2>
<p>A direct link will allow you to get the well-known save dialog box directly
if you open it in the browser, without being hassled by the hosting company
download page and locating the download link. Moreover, the direct link can
be used to stream a file or view a file in certain programs such as media
players (if coming with URL support). Likewise, if WhatsApp is common in
your country, rather than creating a new contact each time if you need to
chat with someone, weather it is a customer or technical support, you can
simply select the number or copy it and start chatting right away. Even
more, you can share the WhatsApp link of your own number if people usually
need to contact you in case you work as a freelancer.</p>
<h2>Notes</h2>
<ul>
<li>A link of a folder cannot be converted; the link has to be directing to a
file.</li>
<li>Make sure the link you are sharing is public (anyone with the link can
access) in order for it to be successfully converted.</li>
<li>You can change the hotkeys from the NVDA menu> preferences> input
gestures.</li>
<li>If you find a certain format of a phone number that is not detected, you
can email me with an example.</li>
<li>Certain type of files and sizes in Google Drive might take you to a page
that says "Google Drive can't scan this file for viruses." in that case,
you have to click on download anyway link.</li>
</ul>
<h2>Acknowledgements</h2>
<p>A huge thanks goes to the following friends, without them I couldn't have
made it happen:</p>
<ul>
<li>Qais Alrefai for testing the add-on and providing me with various material
to test with, and also for his observations and general idea for the
addon.</li>
<li>Marina Amir for translating the add-on to French, language editing and
testing.</li>
<li>Riad Assoum for translating the add-on to Arabic.</li>
<li>all testers.</li>
</ul>
NVDA Unmutehttp://addons.nvda-project.org/addons/unmute.hu.html2023-05-10T20:38:32Z2021-06-08T03:54:01Z
<ul>
<li>Author: Oleksandr Gryshchenko</li>
<li>Version: 1.5</li>
<li>NVDA compatibility: 2019.3 and beyond</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=unmute">stable version</a></li>
</ul>
<p>This add-on checks the status of the Windows audio system when NVDA
starts. And, if it turns out that the sound is muted - the add-on forcibly
turns it on.</p>
<p>At the same time, the volume level is checked separately for the NVDA
process.</p>
<p>The add-on also checks the status of the speech synthesizer. If there are
problems with its initialization, attempts are made to start the
synthesizer, which is specified in the NVDA settings.</p>
<p>There is an additional opportunity to check on which audio device the NVDA
sound is output. And, if this device differs from the default device, the
output automatically switches to the audio device installed in the system as
the main one.</p>
<p>Note: If the add-on startup sound always plays even if the NVDA volume is
online. That is, the add-on switches the output to the main audio device
each time you start NVDA.</p>
<p>This occurs when the audio output device is in the NVDA settings is differ
from the default output device or "Microsoft Sound Mapper".</p>
<p>This can be easily solved in one of the following ways:</p>
<ol>
<li>After restarting NVDA, just save the current configuration using
NVDA+Ctrl+C. The default audio device will be saved in the NVDA settings
and switching will not occur each time when NVDA starts.</li>
<li>If you don't want to change the NVDA configuration - just disable the
function of switching audio devices in the Unmute settings panel.</li>
</ol>
<h2>Add-on settings dialog</h2>
<p>To open the add-on settings panel, follow these steps:</p>
<ul>
<li>Press NVDA+N to open NVDA menu.</li>
<li>Then go to "Preferences" -> "Settings..." and in the categories list find
and open "Unmute Windows Audio".</li>
</ul>
<p>That's it, you can now use the Tab key to move between add-on settings.</p>
<p>The following options are available in the add-on settings dialog:</p>
<ol>
<li><p>The first slider in the add-on settings dialog allows you to specify the
volume level of Windows, which will be set when you start NVDA if the
sound was previously muted or was too low.</p></li>
<li><p>The minimum Windows volume level at which the volume up procedure will be
applied. This slider allows you to adjust the sensitivity level of the
add-on.</p>
<p> If the volume level drops to less than the value specified here, the volume will be increased the next time you start NVDA.</p>
<p> Otherwise, if the volume level remains higher than the value specified here, then when you restart NVDA, its level will not change.</p>
<p> And, of course, if the sound was previously turned off, when restarts add-on will turn it on anyway.</p></li>
<li><p>The following check box allows to enable re-initialization of the voice
synthesizer driver.</p>
<p> This procedure will only start if it is detected at NVDA startup that the voice synthesizer driver has not been initialized.</p></li>
<li><p>In this field you can specify the number of attempts to re-initialize the
voice synthesizer driver. Attempts are performed cyclically with an
interval of 1 second. A value of 0 means that attempts will be performed
indefinitely until the procedure is successfully completed.</p></li>
<li><p>The "Switch to the default output audio device" option allows to check at
startup the audio device on which NVDA sound is output. And, if this
device differs from the default device, the output automatically switches
to the audio device installed in the system as the main one.</p></li>
<li><p>The next checkbox turns on or off playing the startup sound when the
operation is successful.</p></li>
</ol>
<h2>Third Party components</h2>
<p>The add-on uses the following third-party components:</p>
<ul>
<li>For interaction with the <strong>Windows Core Audio API</strong> - <a href="https://github.com/AndreMiras/pycaw/">PyCaw
module</a> that is distributed under
the MIT license.</li>
<li>For getting the information about running processes and using the PyCaw
component - <a href="https://github.com/giampaolo/psutil">psutil module</a> that is
distributed under BSD-3 license.</li>
</ul>
<h2>Change log</h2>
<h3>Version 1.5.5</h3>
<ul>
<li>the add-on has been tested for compatibility with NVDA 2021.1;</li>
<li>updated third-party module <strong>psutil</strong>;</li>
<li>the add-on is adapted to support Python versions 3.7 and 3.8;</li>
<li>MyPy type annotations added to the add-on source code;</li>
<li>added "Switch to the default output audio device" feature;</li>
<li>the add-on parameters are always stored in the base configuration profile.</li>
</ul>
<h3>Version 1.4</h3>
<ul>
<li>added a method to increase the startup volume separately for the NVDA
process;</li>
<li>changed the sound notification of a successful operation (thanks to
Manolo);</li>
<li>all manual volume control functions have been transferred to the NVDA
Volume Adjustment add-on.</li>
</ul>
<h3>Version 1.3</h3>
<ul>
<li>added the ability to control the volume of the main audio device and
separately for each running program;</li>
<li>updated translation into Vietnamese (thanks to Dang Manh Cuong);</li>
<li>added Turkish translation (thanks to Cagri Dogan);</li>
<li>Italian translation added (thanks to Christianlm);</li>
<li>added simplified Chinese translation (thanks to Cary Rowen);</li>
<li>Polish translation added (thanks to Stefan Banita);</li>
<li>updated Ukrainian translation;</li>
<li>updated ReadMe.</li>
</ul>
<h3>Version 1.2</h3>
<ul>
<li>switched to using the <strong>Core Audio Windows API</strong> instead of <strong>Windows
Sound Manager</strong>;</li>
<li>added startup sound playback when audio is successfully turned on by
add-on.</li>
</ul>
<h3>Version 1.1</h3>
<ul>
<li>added add-on settings dialog;</li>
<li>updated Ukrainian translation.</li>
</ul>
<h3>Version 1.0.1</h3>
<ul>
<li>Performs repeated attempts to enabling the synth driver in case of its
failed initialization;</li>
<li>Vietnamese translation added by Dang Manh Cuong;</li>
<li>Ukrainian translation added.</li>
</ul>
<h3>Version 1.0. Features of implementation</h3>
<p>The add-on uses a third-party module Windows Sound Manager.</p>
<h2>Altering of add-on source code</h2>
<p>You may clone this repo to make alteration to NVDA Unmute.</p>
<h3>Third Party dependencies</h3>
<p>These can be installed with pip:</p>
<ul>
<li>markdown</li>
<li>scons</li>
<li>python-gettext</li>
</ul>
<h3>To package the add-on for distribution</h3>
<ol>
<li>Open a command line, change to the root of this repo</li>
<li>Run the <strong>scons</strong> command. The created add-on, if there were no errors,
is placed in the current directory.</li>
</ol>
Check Input Gestureshttp://addons.nvda-project.org/addons/checkGestures.hu.html2023-05-19T22:38:50Z2021-05-26T17:24:18Z
<ul>
<li>Author: Oleksandr Gryshchenko</li>
<li>Version: 1.0</li>
<li>NVDA compatibility: 2019.3 and beyond</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=checkGestures">stable version</a></li>
</ul>
<p>Find and fix input gestures conflicts in NVDA and add-ons. The general term
"input gestures" includes keyboard commands, commands entered from Braille
keyboards and gestures of touch screens.</p>
<p>Each of the installed add-ons can make changes to the NVDA configuration by
adding or reassigning existing input gestures. If the same input gestures
are binded to several functions, it will be impossible to call some of them.</p>
<h2>Search for duplicate gestures</h2>
<p>To detect duplicate gestures, call the NVDA menu, go to the "Tools" submenu,
then - "Check Input Gestures" and activate the menu item "Search for
duplicate gestures...".</p>
<p>After that, all input gestures used in NVDA will be checked in the following
order:</p>
<ol>
<li>globalCommands;</li>
<li>globalPlugins.</li>
</ol>
<p>If the same input gestures will be detected, which are assigned to different
functions, their list will be displayed in a separate dialog box.</p>
<p>After pressing the Enter key on the selected list item, the corresponding
NVDA function will be selected and opened in the standard "Input
Gestures..." dialog, where you can delete or reassign the associated
gesture.</p>
<p>Note: As you know, features that don't have a text description do not appear
in the "Input Gestures..." dialog. Therefore, after activating such an
element, the corresponding warning will be displayed.</p>
<h2>Gestures without description</h2>
<p>To view the list of gestures binded with functions without a text
description, if they are found in your NVDA configuration, you need to call
the NVDA menu, go to the submenu "Tools", then - "Gestures without
description...".</p>
<p>Such features do not appear in the standard NVDA "Input Gestures..." dialog,
so it is not yet possible to delete or reassign associated gestures.</p>
<h2>Help</h2>
<p>One way to view this help page is to call up the NVDA menu, go to the
"Tools" submenu, then - "Check Input Gestures", and activate "Help".</p>
<p>Note: All features of the add-on are presented in the NVDA "Input Gestures"
dialog and you can assign your own keyboard shortcuts to each of them.</p>
<h2>Contributions</h2>
<p>We are very grateful to everyone who made the effort to develop, translate
and maintain this add-on:</p>
<ul>
<li>Wafiqtaher - Arabic translation;</li>
<li>Angelo Miguel Abrantes - Portuguese translation;</li>
<li>Cagri Dogan - Turkish translation.</li>
</ul>
<h2>Change log</h2>
<h3>Version 1.0</h3>
<ul>
<li>implemented search for duplicate input gestures;</li>
<li>implemented search for input gestures binded to functions without a text
description.</li>
</ul>
<h2>Altering of add-on source code</h2>
<p>You may clone this repo to make alteration to NVDA Check Input Gestures.</p>
<h3>Third Party dependencies</h3>
<p>These can be installed with pip:</p>
<ul>
<li>markdown</li>
<li>scons</li>
<li>python-gettext</li>
</ul>
<h3>To package the add-on for distribution</h3>
<ol>
<li>Open a command line, change to the root of this repo</li>
<li>Run the <strong>scons</strong> command. The created add-on, if there were no errors,
is placed in the current directory.</li>
</ol>
WordNavhttp://addons.nvda-project.org/addons/wordNav.hu.html2023-05-10T20:38:32Z2021-05-07T05:30:37Z
<ul>
<li>Author: Tony Malykh</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=wordnav">stable version</a></li>
<li>NVDA compatibility: 2019.3 and later</li>
</ul>
<p>WordNav NVDA add-on improves built-in navigation by word, as well as adds
extra word navigation commands with different definition for the word.</p>
<p>Most text editors support Control+LeftArrow/RightArrow commands for word
navigation. However the definition of the word changes from one program to
another. This is especially true of modern web-based text editors, such as
Monaco. NVDA should know the definition of word in given program in order to
speak words correctly. If NVDA doesn't know the exact definition, then
either words are going to be skipped, or pronounced multiple
times. Moreover, some web-based text editors position the cursor in the end
of the word, instead of the beginning, making editing much harder for
visually impaired users. In order to combat this problem I have created
enhanced word navigation commands, that take the word definition from
Notepad++ and they do not rely on program's definition of words, but rather
parse lines into words on NVDA's side. The Control+LeftArrow/RightArrow
gesture is not even sent to the program, thus ensuring the consistency of
the speech.</p>
<p>Please note that a prototype of WordNav was formerly a part of <a href="https://github.com/mltony/nvda-tonys-enhancements/">Tony's
enhancements</a>
add-on. Please either uninstall it or upgrade to <a href="https://github.com/mltony/nvda-tonys-enhancements/releases/latest/download/tonysEnhancements.nvda-addon">Tony's enhancements latest
stable
version</a>
to avoid conflicts.</p>
<p>Currently WordNav supports four definitions of the word, assigned to
different gestures:</p>
<ul>
<li><code>Left Control+Arrows</code>: Notepad++ definition, that treats alphanumeric
characters as words, and adjacent punctuation marks are also treated as
words. This should be the most convenient word definition for the majority
of users.</li>
<li><code>RightControl+Arrows</code>: Fine word definition splits <code>camelCaseIdentifiers</code>
and <code>underscore_separated_identifiers</code> into separate parts, thus allowing
the cursor to go into long identifiers.</li>
<li><code>LeftControl+Windows+Arrows</code>: Bulky word definition treats almost all
punctuation symbols adjacent to text as part of a single word, therefore
it would treat paths like <code>C:\directory\subdirectory\file.txt</code> as a single
word.</li>
<li><code>RightControl+Windows+Arros</code>: Multiword definition, that groups several
words together. The amount of words is configurable.</li>
</ul>
<p>Gestures can be customized in WordNav settings panel.</p>
<h2>Notes</h2>
<ul>
<li>At this time WordNav doesn't modify <code>Control+Shift+LeftArrow/RightArrow</code>
gestures to select words, since implementation of such commands are
significantly more complicated.</li>
<li>If you would like to use virtual desktops feature of Windows 10, please
remember to disable Control+Windows+Arrows keyboard shortcuts either in
WordNav Settings panel, or in NVDA Input gestures dialog.</li>
<li>WordNav doesn't work reliably in VSCode, since due to its internal
optimizations, VSCode presents only a few lines of file contents at a
time, that change dynamically, and this occasionally interferes with
WordNav algorithm.</li>
</ul>
Win Wizardhttp://addons.nvda-project.org/addons/winWizard.hu.html2024-03-23T16:52:33Z2021-04-28T11:10:21Z
<ul>
<li>Author: Oriol Gómez, Łukasz Golonka, current maintenance by Jakub Lukowicz</li>
<li>NVDA compatibility: 2019.3 and beyond</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=winwizard">stable version</a></li>
</ul>
<p>This add-on allows you to perform some operations on the focused window or
the process associated with it. When killing a process, or showing / hiding
a window a confirmation beep is played when the action succeeds. If you
find this annoying you can disable these beeps in the Win Wizard's settings
panel available from NVDA's settings dialog.</p>
<h2>Keyboard commands:</h2>
<p>All these commands can be remapped from the Input gestures dialog in the Win
Wizard category.</p>
<h3>Hiding and showing hidden windows:</h3>
<ul>
<li>NVDA+Windows+numbers from 1 to 0 - hides currently focused window in the
slot corresponding to the pressed number</li>
<li>NVDA+Windows+left arrow - moves to the previous stack of hidden windows.</li>
<li>NVDA+Windows+right arrow - moves to the next stack of hidden windows.</li>
<li>Windows+Shift+h - hides the currently focused window in the first
available slot</li>
<li>NVDA+Windows+h - shows the last hidden window</li>
<li>Windows+Shift+l - shows the list of all hidden windows grouped by the
stacks (please note that by default last hidden window is selected)</li>
</ul>
<h3>Managing processes:</h3>
<ul>
<li>Windows+F4 - kills the process associated with the currently focused
window</li>
<li>NVDA+Windows+p - opens dialog allowing you to set priority of the process
associated with the currently focused window</li>
</ul>
<h3>Miscellaneous commands:</h3>
<ul>
<li>NVDA+Windows+TAB - switches between top level windows of the current
program (useful in foobar2000, Back4Sure etc.)</li>
<li>CTRL+ALT+T - allows you to change title of the currently focused program</li>
</ul>
<h2>Changes:</h2>
<h3>Changes for 5.0.6:</h3>
<ul>
<li>Compatibility with NVDA 2024.1</li>
<li>Update translations</li>
</ul>
<h3>Changes for 5.0.5:</h3>
<ul>
<li>Compatibility with NVDA 2023.2</li>
<li>Update translations</li>
</ul>
<h3>Changes for 5.0.4:</h3>
<ul>
<li>Compatibility with NVDA 2022.1</li>
<li>It is now possible to disable confirmation beeps in the add-ons settings
panel</li>
<li>Update translations</li>
</ul>
<h3>Changes for 5.0.3:</h3>
<ul>
<li>Compatibility with NVDA 2021.1</li>
</ul>
<h3>Changes for 5.0.2:</h3>
<ul>
<li>First release available from the add-ons website</li>
</ul>
Console Toolkithttp://addons.nvda-project.org/addons/consoleToolkit.hu.html2024-02-13T14:35:33Z2021-04-28T11:09:48Z
<ul>
<li>Author: Tony Malykh</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=consoletoolkit">stable version</a></li>
<li>NVDA compatibility: 2019.3 and later</li>
</ul>
<p>Console Toolkit is NVDA add-on, that provides accessibility improvements for
Windows console, also known as Command prompt. It also works well in Windows
PowerShell. Some of the features may work in alternative terminals, such as
Cygwin, PuTTY and Windows Terminal, however, the add-on has only been
carefully tested with the default Windows Console. SSH users might find this
add-on especially handy.</p>
<p>Some of the features were previously part of <a href="https://github.com/mltony/nvda-tonys'enhancements/">Tony's enhancements
add-on</a>.</p>
<h2>Downloads</h2>
<p><a href="https://github.com/mltony/nvda-console-toolkit/releases/latest/download/consoleToolkit.nvda-addon">Console
toolkit</a></p>
<h2>Real-time console speech</h2>
<p>This option makes NVDA to speak new lines immediately as they appear in
console output, instead of queueing new speech utterances. For example, if
NVDA is busy speaking a line that appeared on the screen 1 minute ago, and
now a new line appears, this option will cancel speaking the old line and
start speaking the new line right away, thus providing a more real-time
feedback on what's happening in console window.</p>
<h2>Beep on console updates</h2>
<p>Beep a low pitch impulse every time console text is updated.</p>
<h2>Enforce Control+V in consoles</h2>
<p>This option makes Control+V shortcut to work inside <code>ssh</code> sessions.</p>
<h2>Experimental: command prompt editing</h2>
<p>Note: this feature is experimental. Please read this section carefully and
make sure you understand how it works before reporting issues.</p>
<p>Press <code>NVDA+E</code> to identify current prompt in console window and edit it in
an accessible "Edit prompt" window. After editing you can either press
<code>Escape</code> to update current command line, or <code>Enter</code> to update and
immediately execute command. Alternatively you can press <code>Alt+F4</code> to close
edit prompt window without updating command line.</p>
<p>This feature has been tested in Windows command prompt <code>cmd.exe</code> as well as
in bash shell over ssh connections, as well as in WSL and cygwin. It might
also work in alternative Unix shells, however it hasn't been tested.</p>
<p>Here is how add-on extracts current command.</p>
<ol>
<li>It presses <code>End</code> key and then sends a control character, that is a rare
Unicodecharacter not likely to be used anywhere.</li>
<li>Then it presses <code>home</code> key and sends another control character.</li>
<li>Then it waits for control characters to appear on the screen, which might
take some time on slow SSH connections.</li>
<li>Command is what appears between two control characters.</li>
<li>When "Use UI Automation to access the Windows Console when available"
option is enabled in NVDA settings, it sends one more control character
in the beginning of the string. This is needed to parse multiline
commands correctly: UIA implementation trims whitespaces in the end of
each line, so in order to deduce whether there is a space between two
lines, we need to shift them by one character. Please note, however, that
this way we don't preserve the number of spaces between words, we only
guarantee to preserve the presence of spaces.</li>
<li>Before editing add-on makes sure to remove control characters by placing
cursor in the beginning and end and simulating <code>Delete</code> and <code>Backspace</code>
key presses.</li>
<li>It presents command in "Edit prompt" window for user to view or edit.</li>
<li><p>After user presses <code>Enter</code> or <code>Escape</code>,it first erases current line in
the console. This is achieved via one of four methods, the choice of the
method is configurable. Currently four methods are supported:</p>
<ul>
<li><code>Control+C</code>: works in both <code>cmd.exe</code> and <code>bash</code>, but leaves previous
prompt visible on the screen; doesn't work in emacs; sometimes
unreliable on slow SSH connections</li>
<li><code>Escape</code>: works only in <code>cmd.exe</code>"),</li>
<li><code>Control+A Control+K</code>: works in <code>bash</code> and <code>emacs</code>; doesn't work in
<code>cmd.exe</code></li>
<li><code>Backspace</code> (recommended): works in all environments; however slower
and may cause corruption if the length of the line has changed</li>
</ul>
</li>
<li><p>Then add-on simulates keystrokes to type the updated command and
optionally simulates <code>Enter</code> key press.</p></li>
</ol>
<p>Troubleshooting:</p>
<ul>
<li>Verify that 'Home', 'End', 'Delete' and 'Backspace' keys work as expected
in your console.</li>
<li>Verify that your console supports Unicode characters. Some ssh connections
don't support Unicode.</li>
<li>Verify that selected deleting method works in your console.</li>
</ul>
<h2>Experimental: capturing command output</h2>
<p>Note: this feature is experimental. Please read this section carefully and
make sure you understand how it works before reporting issues.</p>
<p>While in command line or in "Edit prompt" window, press <code>Control+Enter</code> to
capture command output. This add-on is capable of capturing large output
that spans multiple screens, although when output is larger than 10 screens
capturing process takes significant time to complete. Add-on will play a
long chime sound, and it will last as long as the add-on is capturing the
output of currently running command, or until timeout has been
reached. Alternatively, press <code>NVDA+E</code> to interrupt capturing.</p>
<p>When "Use UI Automation to access the Windows Console when available"
feature is enabled in NVDA settings, you can switch to other windows while
capturing is going on. However, if this option is disabled, then NVDA is
using a legacy console code, that only works when consoel is focused, and
therefore switching to any other window will pause capturing.</p>
<p>Command capturing works by redirecting command output to <code>less</code>
command. Default suffix that is appended to commands is:
<code>
|less -c 2>&1
</code>
Please only change it if you know what you're doing. This add-on knows how
to interact with the output of <code>less</code> command to retrieve output page by
page.</p>
<p>On Windows <code>less.exe</code> tool needs to be installed separately. You can install
it via cygwin, or download a windows binary elsewhere.</p>
<p>If you are using <code>tmux</code> or <code>screen</code> in Linux, please make sure that no
status line is displayed in the bottom. In <code>tmux</code> run
<code>
tmux set status off
</code>
to get rid of status line, or modify your <code>tmux.conf</code> file.</p>
<p>Troubleshooting:</p>
<ul>
<li>After a failed output capturing attempt, press <code>UpArrow</code> in the console to
check what command has actually been executed.</li>
<li>Revert back to default capturing suffix, mentioned above.</li>
<li>Try troubleshooting steps from "command prompt editing" section.</li>
</ul>
Quick Dictionaryhttp://addons.nvda-project.org/addons/quickDictionary.hu.html2023-05-10T20:38:33Z2020-12-22T04:09:33Z
<ul>
<li>Author: Oleksandr Gryshchenko</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=quickdictionary">stable version</a></li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=quickdictionary-dev">development version</a></li>
<li>NVDA compatibility: 2019.3 to 2020.3</li>
</ul>
<p>Welcome to NVDA Quick Dictionary addon, which will allow you to quickly get
a dictionary article with the translation of a word or phrase into your
chosen language by pressing a key combination. There are few basic keyboard
shortcuts and they are all intuitive and convenient so you will remember
them quickly.</p>
<p>Dictionary articles contain detailed information about a word, such as part
of speech, gender, plural or singular, translation options, list of
meanings, synonyms and detailed examples. Such information will be useful
for people who are learning foreign languages, or seek to use in
communication all the richness and diversity of their own language.</p>
<p>The add-on supports several online dictionary services. You can select the
desired remote dictionary in the appropriate dialog box or by using keyboard
shortcuts. Each available service has its own settings panel.</p>
<p>There are also advanced opportunities for working with profiles of the voice
synthesizers. You can associate a voice synthesizer profile with a specific
language, after that translations into this language will be automatically
voiced by the selected synthesizer.</p>
<p>Below are all the features of the add-on and keyboard shortcuts to control them. By default all functions are called using two-layer commands. But for any of these methods you can always assign convenient for you keyboard shortcuts. You can do it in the NVDA "Preferences" -> "Input gestures..." dialog.</p>
<h2>Receiving a dictionary article</h2>
<p>In order to get an article from the dictionary, you must first select the
word you are interested in or copy it to the clipboard. Then just press
NVDA+Y twice. There is also another way to get a dictionary entry: pressing
NVDA+Y once switches the keyboard to add-on control mode, then just use the
D key.</p>
<h2>Add-on control mode</h2>
<p>To access all the features of the add-on, you need to switch to add-on
control mode, you can do this by pressing NVDA+Y once. You will hear a short
low beep and will be able to use the other commands described below. When
you press a key that is not used in the add-on, you will hear another signal
notifying you of an erroneous command and the add-on control mode will be
automatically turned off.</p>
<h2>Add-on commands list</h2>
<p>Basic dictionary commands:</p>
<ul>
<li>D - announce a dictionary entry for a selected word or phrase (same as
NVDA+Y);</li>
<li>W - show dictionary entry in a separate browseable window;</li>
<li>S - swap languages and get Quick Dictionary translation;</li>
<li>A - announce the current source and target languages;</li>
<li>C - copy last dictionary entry to the clipboard;</li>
<li>E - edit text before sending;</li>
<li>U - download from online dictionary and save the current list of available
languages;</li>
<li>function keys - select online dictionary service;</li>
<li>Q - statistics on the using the online service;</li>
<li>F - choose online service.</li>
</ul>
<p>Voice synthesizers profiles management:</p>
<ul>
<li>from 1 to 9 - selection of the voice synthesizer profile;</li>
<li>G - announce the selected profile of voice synthesizers;</li>
<li>B - back to previous voice synthesizer;</li>
<li>R - restore default voice synthesizer;</li>
<li>Del - delete the selected voice synthesizer profile;</li>
<li>V - save configured voice synthesizer profile;</li>
<li>P - display a list of all customized voice synthesizers profiles.</li>
</ul>
<p>Press O to open add-on settings dialog.</p>
<h2>Help on add-on commands</h2>
<p>You can see a list of all the commands used in the add-on as follows:</p>
<ul>
<li>Via the NVDA menu - by pressing NVDA+N, go to the submenu "Tools", then -
"Quick Dictionary" and activate the menu item "Help on add-on commands".</li>
<li>Press the H key in add-on control mode (NVDA+Y).</li>
</ul>
<h2>Add-on help</h2>
<p>To open the add-on help - press NVDA+N, go to the "Tools" submenu, then -
"Quick Dictionary" and activate the menu item "Help".</p>
<h2>Contributions</h2>
<p>We are very grateful to everyone who made the effort to develop, translate
and maintain this add-on:</p>
<ul>
<li>Cagri Dogan - Turkish translation;</li>
<li>Wafiqtaher - Arabic translation.</li>
</ul>
<p>Several good solutions from other developments were used in the Quick
Dictionary add-on. Thanks to the authors of the following add-ons:</p>
<ul>
<li>Instant Translate - Alexy Sadovoy, Beqa Gozalishvili, Mesar Hameed,
Alberto Buffolino and other NVDA contributors.</li>
<li>To work with voice synthesizers profiles were used ideas from the Switch
Synth add-on (thanks to Tyler Spivey).</li>
</ul>
<h2>Change log</h2>
<h3>Version 2.1</h3>
<ul>
<li>added a dialog to edit the text before sending to remote service;</li>
<li>separated add-on help page from ReadMe;</li>
<li>Turkish translation added (thanks to Cagri Dogan).</li>
</ul>
<h3>Version 2.0</h3>
<ul>
<li>added the ability to connect other online dictionary services;</li>
<li>added Lexicala service and its settings panel;</li>
<li>added a dialog for choosing an online service from the list of available
ones;</li>
<li>added a command to get information about the selected service;</li>
<li>added a dialog for working with profiles of voice synthesizers;</li>
<li>implemented the procedure for switching to the previous voice synthesizer;</li>
<li>implemented a parallel thread to monitor the state of the synthesizer;</li>
<li>due to an increase in the number of functions in the add-on - help for
commands is now displayed in a separate window;</li>
<li>updated procedure for caching requests to online services;</li>
<li>added add-on submenu to NVDA menu;</li>
<li>updated ReadMe.</li>
</ul>
<h3>Version 1.2</h3>
<ul>
<li>added the ability to automatically switch voice synthesizers for selected
languages;</li>
<li>added the ability to download the current list of languages available in
the online-dictionary;</li>
<li>Turkish translation added thanks to Cagri Dogan.</li>
</ul>
<h3>Version 1.1</h3>
<ul>
<li>changed some keyboard shortcuts which conflicted with other add-ons;</li>
<li>changed the description of the main add-on features;</li>
<li>updated help and translation of the add-on;</li>
<li>removed some keyboard shortcuts and gave to user opportunity to setup them
yourself;</li>
<li>fixed error in Ukrainian translation (thanks to Volodymyr Perig);</li>
<li>added russian translation.</li>
</ul>
<h3>Version 1.0: features of implementation</h3>
<ul>
<li>execution of requests to the remote server in a separate thread to avoid
blocking the operation of NVDA;</li>
<li>signals while waiting for a response from the server;</li>
<li>caching of the last 100 requests to reduce the load on the remote
dictionary service;</li>
<li>switching to add-on control mode;</li>
<li>possibility to use an alternative server;</li>
<li>add-on settings dialog.</li>
</ul>
Numpad Nav Modehttp://addons.nvda-project.org/addons/numpadNavMode.hu.html2024-03-22T18:27:51Z2020-09-30T21:00:07Z
<h1>Numpad Nav Mode</h1>
<ul>
<li>Author: Luke Davis (Open Source Systems, Ltd.)</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=numpadNavMode">stable version</a></li>
</ul>
<p>Numpad Nav Mode is an <a href="https://nvaccess.org/">NVDA</a> add-on, which allows you to easily switch
your keyboard's numpad between NVDA's navigation controls and the
non-screenreader Windows navigation controls. This can be especially useful
for users migrating from Jaws to NVDA. This add-on also gives granular
control over the numlock key toggle, both when NVDA starts, and optionally
in profiles.</p>
<h3>Navigation modes explanation and features</h3>
<p>The normal functions of the PC number pad, with numlock off, are: page up,
page down, home, end, four-way arrow keys, and a delete key. But NVDA
completely takes over the numpad, to provide review keys, mouse controls,
and object navigation controls. This is true even in laptop keyboard mode,
which also duplicates those functions on non-numpad keys.</p>
<p>However some users do have a numpad on their laptop, and would prefer to use
it for Windows navigation purposes (at least some of the time), especially
because some laptops do not provide home, end, or other such keys. That is
where this add-on can help. Additionally, some desktop users, for example
those used to the way the numpad works in JAWS, may sometimes find it
convenient to use the numpad for those keyboard functions rather than the
normal NVDA keys, which this add-on enables. This includes the popular JAWS
command NumpadInsert+Numpad2, for read to end, which was a specific feature
request from some early users of this add-on.</p>
<h3>How it works</h3>
<p>With numlock off, no matter what keyboard layout you are using, this add-on
will let you press Alt+NVDA+NumpadPlus (which is usually the long key second
up on the right), to quickly and easily switch between the normal NVDA
navigation controls, and the classic Windows navigation controls. This key
can be remapped under Input Gestures, in the Input section.</p>
<p>Note that this add-on doesn't disable the use of numpad insert as an NVDA
modifier, if you have it set as such. If you want that feature, please let
me know, although you can manually turn off numpad insert as a modifier in
NVDA keyboard settings. It also doesn't change the NVDA function of numpad
delete (key between zero and enter)--contact me if you desire this.</p>
<p>If you would prefer to have NVDA start with the Windows nav mode active by
default, you can configure that in NVDA configuration. Go to NVDA's
preferences, then settings, and find the Numpad Nav Mode settings panel.
There you will be able to select a checkbox to turn Windows Nav Mode on by
default when you start NVDA. To get there quickly, press NVDA+N, P, S, then
N one or more times until you hear "Numpad Nav Mode".</p>
<h3>Numlock features</h3>
<p>By default, nothing is done with the numlock key.</p>
<p>However, if you share your computer with a sighted user who prefers that
numlock always be turned on, but you like having it off so that the numpad
works with NVDA, you may want the numlock to automatically turned off when
NVDA starts. Alternatively, you may enter a lot of data, and so prefer the
numlock to always be on when you start NVDA.</p>
<p> Go to NVDA menu, Preferences, Settings, Numpad Nav Mode, and use the "state of numlock when NVDA starts or profile loads" selector. This has three options. The first, "do not change", is the default, and won't touch the numlock. It will be in whatever state it was in before NVDA started.
The second option, is "turn numlock off", which will always turn the numlock off when NVDA starts. The third option, "Turn numlock on", will turn the numlock on if it was off when NVDA started.
If you choose either the second or third option, the numlock will be restored to whatever state it was in before, when you exit NVDA. For example, if you choose "Turn numlock off", and numlock was on when you started NVDA: it will be turned off while you use NVDA, but will be turned back on when you exit NVDA.</p>
<h4>Advanced use cases</h4>
<p>If you use NVDA's powerful configuration profiles, and you would like the
numlock to automatically turn on when you enter certain profiles, do the
following:</p>
<ul>
<li>While in the "normal profile", go to the Numpad Nav Mode settings panel
described above. Check the box for "Initial numlock state is configuration
profile dependent". This option is unchecked by default.</li>
<li>Select OK.</li>
<li>Change to the profile where you want numlock to be always turned off or
on.</li>
<li>Go back to the Numpad Nav Mode settings panel, and select the option to
Turn numlock off or on, as you prefer.</li>
<li>Then select OK. Now, whenever you enter this profile, the numlock will
automatically change to the desired state.</li>
</ul>
<p>Note that this is a new feature, and I don't know if anyone has use for this
feature. If you find one, please send an email or open <a href="https://github.com/opensourcesys/numpadNavMode/issues/new">an issue</a>, to let
me know how you have found to make use of it.</p>
<p>Or, better yet, leave a <a href="https://github.com/nvaccess/addon-datastore/discussions/2630">review</a> for the add-on, and comment on it there!
Reviews are very helpful, whether or not you use that feature.</p>
<h3>New features</h3>
<p>I encourage you to post an <a href="https://github.com/opensourcesys/numpadNavMode/issues/new">issue</a>, or email with any feature
suggestions, or other use cases that I haven't listed here, or just to let
me know you find the add-on useful! But as mentioned above, if you do find
it useful, please leave a <a href="https://github.com/nvaccess/addon-datastore/discussions/2630">review</a>.</p>
<h3>History</h3>
<p>This add-on was the direct result of requests I've heard from users over the
years, and a GitHub discussion in
<a href="https://github.com/nvaccess/nvda/issues/9549">#9549</a>. With thanks to
@Qchristensen and @feerrenrut. The basic implementation of the numlock
features was borrowed from the legacy NumLock Manager add-on, by Noelia Ruiz
(@nvdaes on GitHub), and others. Used with permission.</p>
<h3>Changelog</h3>
<p>(This changelog is incomplete. See Git log for full details.)</p>
<ul>
<li>24.1.0: NVDA 2024.X compatibility.</li>
<li>23.1.0: Added numlock management features. Better logging. Improved config
profile handling (WIP).</li>
<li>23.0: NVDA 2023.X compatibility.</li>
</ul>
Zoom Accessibility Enhancementshttp://addons.nvda-project.org/addons/zoomEnhancements.hu.html2023-05-10T20:38:33Z2020-09-05T17:37:31Z
<ul>
<li>Authors: Mohamad Suliman, Eilana Benish</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=zoomEnhancements">stable version</a></li>
<li>NVDA compatibility: 2018.4 to 2022.1</li>
</ul>
<p>This add-on improves the experience of using Zoom for NVDA users by
providing keyboard shortcuts to Handle alerts for Different events While In
a meeting, make the process of remote control much more accessible and
smoother, and more.</p>
<h2>keyboard shortcuts for controlling alerts In meetings</h2>
<ul>
<li><p>NVDA + Shift + A: cycles between different modes of reporting alerts. The
following modes are available:</p>
<ul>
<li>Report all alerts mode, where all alerts are reported as usual</li>
<li>Beep for alerts, where NVDA will play a short beep for every alert
displayed in Zoom</li>
<li>Silence all alerts, where NVDA will ignore all alerts</li>
<li>Custom mode, Where the user can customize which alerts they want to
have and which not. This can be done using the settings dialog of the
add-on, or by using the dedicated keyboard shortcuts for that</li>
</ul>
</li>
</ul>
<p>The following shortcuts can be used to toggle on / off the announcements of
each type of alert (note that this will be effective when custom mode is
selected):</p>
<ul>
<li>NVDA + Ctrl + 1: Participant Has Joined/Left Meeting (Host Only)</li>
<li>NVDA + Ctrl + 2: Participant Has Joined/Left Waiting Room (Host Only)</li>
<li>NVDA + Ctrl + 3: Audio Muted by Host</li>
<li>NVDA + Ctrl + 4: Video Stopped by Host</li>
<li>NVDA + Ctrl + 5: Screen Sharing Started/Stopped by a Participant</li>
<li>NVDA + Ctrl + 6: Recording Permission Granted/Revoked</li>
<li>NVDA + Ctrl + 7: Public In-meeting Chat Received</li>
<li>NVDA + Ctrl + 8: Private In-meeting Chat Received</li>
<li>NVDA + Ctrl + 9: In-meeting File Upload Completed</li>
<li>NVDA + Ctrl + 0: Host Privilege Granted/Revoked</li>
<li>NVDA + Shift + Ctrl + 1: Participant Has Raised/Lowered Hand (Host Only)</li>
<li>NVDA + Shift + Ctrl + 2: Remote Control Permission Granted/Revoked</li>
<li>NVDA + Shift + Ctrl + 3: IM chat message received</li>
</ul>
<p>Note that you need to leave reporting all alert types selected (in Zoom
accessibility settings) to have the add-on function as expected.</p>
<h2>Keyboard shortcut for Opening add on Dialogue</h2>
<p>NVDA + Z Opens the add-on dialog !</p>
<p>Using this dialog you can :</p>
<ul>
<li>See which alerts are announced and which aren't</li>
<li>Select the types of the alerts you want to be announced</li>
<li>Choose alerts reporting mode</li>
<li>Save custom changes</li>
</ul>
<h2>Remote control</h2>
<p>after a remote control permission is granted, NVDA + O will move the focus
in /Out of the remote controlled screen</p>
<p>Note that the focus should be on one of the meeting controls to be able to
remote control the other screen</p>
<h2>An Important note</h2>
<p>Currently the feature of custom alerts mode where the user can choose which
alerts they want to have and which not works with Zoom only when the user
interface language is set to english.</p>
Kill NVDAhttp://addons.nvda-project.org/addons/killNVDA.hu.html2023-05-10T20:38:33Z2020-04-20T19:07:51Z
<ul>
<li>Author: Tyler Spivey</li>
<li>NVDA compatibility: 2019.2 to 2019.3</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=killnvda">stable version</a></li>
</ul>
<p>This add-on is designed to temporarily kill NVDA, so that you can recover if
it freezes.</p>
<h2>Usage</h2>
<ol>
<li>Install this add-on.</li>
<li>Copy it to the logon screen with the button in General Settings.</li>
<li>When NVDA dies, press control alt delete, then activate the NVDA menu,
Tools, Kill NVDA.</li>
</ol>
<p>After that, press escape. NVDA restarts, but you should be able to use your
computer again.</p>
Time Zonerhttp://addons.nvda-project.org/addons/timeZoner.hu.html2023-06-19T15:45:56Z2020-04-06T00:05:35Z
<ul>
<li>Author: Munawar Bijani</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=timezone">stable version</a></li>
<li>NVDA compatibility: 2019.2.1 and later</li>
</ul>
<p>An add-on for NVDA to announce the time in selected timezones.</p>
<h2>Introduction</h2>
<p>For a very long time now, Windows has had the ability to show multiple
clocks from different timezones. Users can customize the clocks and they
become instantly visible.</p>
<p>Unfortunately, for users of screen readers such as
<a href="https://www.nvaccess.org/">NVDA</a> or
<a href="http://www.freedomscientific.com">JAWS</a>, there is no simple way to get this
information. These screen readers don't support additional clocks, so blind
computer users have to resort to other, third-party solutions, some of which
are paid.</p>
<p>A lot of the work I do involves working across timezones, and eventually I
got tired of manually converting times in my head, especially for timezones
that aren't aligned to the hour (such as India which is +5:30 UTC).</p>
<p>For these reasons, I've created this add-on for NVDA. The add-on lets you
hear times in selected timezones through the use of the timezone ring.</p>
<h2>Usage</h2>
<p>The add-on supports both the legacy and the Python 3 version of NVDA.</p>
<p>Once the add-on is installed, press NVDA+N to bring up NVDA's context
menu. Arrow down to "Preferences" and then up to "Time Zoner".</p>
<p>Press ENTER on "Configure timezone ring".</p>
<p>You will be presented with a dialog to set the timezones for which you want
the time and date announced.</p>
<p>Select items in the timezone list to add them to your timezone
ring. Deselect (or press the Remove button) to delete them from the ring.</p>
<p>You can also reorder the timezones in the ring by using the Move Up and Move
Down buttons.</p>
<p>Use the "Filter" box to search for specific timezones.</p>
<p>Check the "Announce abbreviated timezones" box to hear abbreviated timezone
names such as IST or GMT. Uncheck the box to hear the full timezone names
such as Asia/Kolkata or Europe/London.</p>
<p>When you are finished configuring the timezones, press the Save button.</p>
<p>From here on, you can press NVDA+Alt+T to announce times and dates in your
timezone ring.</p>
<p>When you first install the add-on, NVDA will default to your local timezone
if it can get it.</p>
<h2>Change Log</h2>
<h3>Version 1.03, released on 03/21/2020</h3>
<ul>
<li>The add-on no longer crashes if the default timezone can't be set.</li>
<li>Fixed an issue with relative links in the documentation.</li>
</ul>
<h3>Version 1.02, released on 03/18/2020</h3>
<ul>
<li>When installing a new version of this add-on, the settings from a previous
installation are no longer lost.</li>
<li>Other changes to conform to NVDA add-on standard compliance.</li>
</ul>
<h3>Version 1.01, released on 03/12/2020</h3>
<ul>
<li>The time and date are announced in the user's locale, meaning that 24-hour
time is honored if set.</li>
<li>NVDA will announce either the abbreviated or full timezone depending on
the user's setting in the Timezone Ring dialog. For example, it will
either say Europe/London, or it will say GMT or BST. This setting is
controlled by checking or unchecking the "Announce abbreviated timezones"
checkbox.</li>
<li>Add-on includes translator comments (@ruifontes).</li>
<li>Add-on now includes header comments (@ruifontes).</li>
<li>The Escape key closes the Timezone Ring dialog (@ruifontes).</li>
<li>The menu item to open the Timezone Ring dialog is now named appropriately
(@ruifontes).</li>
<li>NVDA now defaults to the local timezone on installation of this add-on, if
the local timezone is available.</li>
<li>Support for multiple timezones through the use of a timezone ring.</li>
<li>This add-on now uses the key NVDA+Alt+T to prevent conflict with the Clock
add-on.</li>
<li>The timezone selector dialog now has a filter box. NVDA will announce the
number of results as the user starts typing into the filter field.</li>
<li>Python 2 support</li>
<li>The date and time is now announced in a separate thread to prevent hanging
the NVDA thread in case retrieval takes a little while.</li>
<li>The timezone selector dialog now has a Cancel button and no longer
prevents NVDA from shutting down.</li>
</ul>
Tony's enhancementshttp://addons.nvda-project.org/addons/tonysEnhancements.hu.html2024-02-13T14:36:26Z2020-04-01T21:52:59Z
<ul>
<li>Authors: Tony Malykh</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=tonysEnhancements">stable version</a></li>
<li>NVDA compatibility: 2022.4 and 2023.1</li>
</ul>
<p>This add-on contains a number of small improvements to NVDA screenreader,
each of them too small to deserve a separate add-on.</p>
<h2>Enhanced table navigation commands</h2>
<ul>
<li>NVDA+Control+digit - jump to 1st/2nd/3rd/... 10th column in the table.</li>
<li>NVDA+Alt+digit - jump to 1st/2nd/3rd/... 10th row in the table.</li>
</ul>
<h2>Removed table navigation commands</h2>
<p>The following table navigation commands have been Removed as they have been
integrated into the latest version of NVDA core.</p>
<ul>
<li>Jump to the first/last column in the table.</li>
<li>Jump to the first/last row in the table.</li>
<li>Read current column in the table starting from current cell down.</li>
<li>Read current row in the table starting from current cell.</li>
<li>Read current column in the table starting from the top.</li>
<li>Read current row in the table starting from the beginning of the row.</li>
</ul>
<p>Note: To learn about NVDA's default gestures for these features, please
refer to the NVDA user guide.</p>
<h2>Copying tables to clipboard</h2>
<p>With the following shortcuts you can copy either the whole table or current
row or current column in a formatted way, so that you can paste it as a
table to rich text editors, such as Microsoft Word or WordPad.</p>
<ul>
<li>NVDA+Alt+T - shows popup menu with options to copy table or part of it.</li>
</ul>
<p>There are also separate scripts for copying tables, rows, columns and cells,
but they don't have keyboard shortcuts assigned by default, custom keyboard
shortcuts cfor them can be assigned in InputGestures dialog of NVDA.</p>
<h2>Enhanced word navigation commands</h2>
<p>As of version 1.8 this functionality has been moved to <a href="https://github.com/mltony/nvda-word-nav/">WordNav
add-on</a>.</p>
<h2>Automatic language switching</h2>
<p>Allows to automatically switch the language of your synthesizer by character
set. Refgular expression for every language can be configured in the
preferences window for this add-on. Please make sure that your synthesizer
supports all the languages you're interested in. Switching between two
Latin-based languages or two languages whose character sets are similar is
not supported at this time.</p>
<h2>Quicksearch commands</h2>
<p>You can have up to three slots for configurable regular expressions that you
frequencly search for in editables. By default they are assigned to
<code>PrintScreen</code>, <code>ScrollLock</code> and <code>Pause</code> buttons. You can perform forward
search, or backward search by pressing <code>Shift</code> combined with these buttons.</p>
<h2>Suppress unwanted 'unselected' speech from NVDA</h2>
<p>Suppose you have some text selected in text editors. Then you press a key,
such as Home, or UpArrow, that is supposed to take you to another part of
the document. NVDA would announce 'unselected' and then speak the former
selection, which can be inconvenient at times. This feature prevents NVDA
from speaking formerly selected text in situations like this.</p>
<h2>Dynamic keystrokes</h2>
<p>You can assign certain keystrokes to be dynamic. After issuing such a
keystroke, NVDA will be checking currently focused window for any updates
and if the line is updated, NVDA will speak it automatically. For example,
certain keystrokes in text editors should be marked dynamic, such as Jump to
bookmark, jump to another line and debugging keystrokes,such as step
into/step over.</p>
<p>The format of dynamic keystrokes table is simple: every line contains a rule
in the following format:
<code>
appName keystroke
</code>
where <code>appName</code> is the name of the application where this keystroke is
marked dynamic (or <code>*</code> to b marked dynamic in all applications),
and<code>keystroke</code> is a keystroke in NVDA format, for example,
<code>control+alt+shift+pagedown</code>.</p>
<p>In order to figure out appName for your application, do this:</p>
<ol>
<li>Switch to your application.</li>
<li>Open NVDA Python Console by pressing NVDA+Shift+Z.</li>
<li>Type <code>focus.appModule.appName</code> and hit enter.</li>
<li>Press F6 to go to output pane and find appName value in the last line.</li>
</ol>
<h2>Showing and hiding windows</h2>
<p>You can hide current window, and you can show all currently hidden
windows. This might be useful if you use multiple windows in the same app
(say Chrome) and you would like to rearrange them.</p>
<ul>
<li>NVDA+Shift+-: hide current window.</li>
<li>NVDA+Shift+=: Show all currently closed windows.</li>
</ul>
<p>Please note, that if you quit NVDA while a window is hidden, there is
currently no way to show it after NVDA is restarted.</p>
<h2>Console enhancements</h2>
<p>Previously this add-on included a number of console-related features. As of
version 1.8, all console-related features have been moved to <a href="https://github.com/mltony/nvda-console-toolkit/">Console
Toolkit
add-on</a>. Specifically:</p>
<ul>
<li>Real-time console output</li>
<li>Beep on console updates</li>
<li>Enforce Control+V in consoles</li>
</ul>
<h2>Beep when NVDA is busy</h2>
<p>Check this option for NVDA to provide audio feedback when NVDA is busy. NVDA
being busy does not necessarily indicate a problem with NVDA, but rather
this is a signal to the user that any NVDA commands will not be processed
immediately.</p>
<h2>Volume adjustment</h2>
<ul>
<li>NVDA+Control+PageUp/PageDown - adjust NVDA volume.</li>
<li>NVDA+Alt+PageUp/PageDown - adjust volume of all applications except for
NVDA.</li>
</ul>
<h2>Sound split</h2>
<p>In Sound split mode NVDA will direct all sound output to the right channel,
while applications will play their sounds in the left channel. Channels can
be switched in settings.</p>
<ul>
<li>NVDA+Alt+S toggles sound split mode.</li>
</ul>
<p>Please note, that in certain situations sound output from an application
might be limited to one channel even when NVDA is not running. For example,
this could happen if NVDA has crashed while sound split was on, or when NVDA
exited cleanly while the app in question was not running. In those
situations, please restart NVDA, and turn off sound split while the app in
question is running.</p>
<h2>Enhanced mouse functions</h2>
<ul>
<li>Alt+NumPadDivide: Point mouse cursor at current object and click it.</li>
<li>Alt+NumPadMultiply: Point mouse cursor at current object and right mouse
button click on it.</li>
<li>Alt+NumPadPlus/NumPadMinus: Point mouse cursor at current object and
scroll down/up. THis is useful for infinite scroll webpages and webpages
that load more content on scroll.</li>
<li>Alt+NumPadDelete: Move mouse cursor out of the way to top left corner of
the screen. This can be useful to prevent unwanted hover over windows in
certain applications.</li>
</ul>
<h2>Detecting insert mode in text editors</h2>
<p>If this option is enabled, NVDA will beep when it detects insert mode in
text editors.</p>
<h2>Blocking double insert keystroke</h2>
<p>In NVDA pressing Insert key twice in a row toggles insert mode in
applications. However, sometimes it happens accidentally and it triggers
insert mode. Since this is a special keystroke, it cannot be disabled in the
settings. This add-on provides a way to block this keyboard shortcut. When
double insert is blocked, insert mode can stil be toggled by pressing
NVDA+F2 and then Insert.</p>
<p>This option is disabled by default and must be enabled in the settings.</p>
<h2>System priority of NVDA process</h2>
<p>This allows to boost system priority of NVDA process, that might improve
NVDA responsiveness, especially when CPU load is high.</p>
<h2>Fixing a bug when focus gets stuck in the taskbar when pressing Windows+Numbers</h2>
<p>There is a bug in Windows 10, and possibly in other versions. When switching
between applications using Windows+number shortcut sometimes the focus gets
stuck in the taskbar area instead of jumping to the window being switched
to. Since trying to report this bug to Microsoft is hopeless, a workaround
has been implemented in this add-on. The add-on detects this situation and
plays a short low-pitch beep when this situation is detected, then the
add-on fixes it automatically.</p>
Phonetic Punctuationhttp://addons.nvda-project.org/addons/phoneticPunctuation.hu.html2023-08-22T14:48:40Z2020-04-01T21:52:58Z
<ul>
<li>Authors: Tony Malykh</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=phoneticPunctuation">stable version</a></li>
<li>NVDA compatibility: 2019.3</li>
</ul>
<p>Phonetic punctuation is an NVDA add-on that allows to convert punctuation
signs into audio icons. In general, it can also convert any regular
expressions into audio icons.</p>
<h2>Demo</h2>
<p>You can listen to a sample speech output with phonetic punctuation here (10
seconds audio):
https://soundcloud.com/user-977282820/nvda-phonetic-punctuation-demo</p>
<h2>Usage</h2>
<ol>
<li>Make sure that your symbol level is set to appropriate value. If you're
not sure, then press NVDA+P several times until you select "Symbol level
all".</li>
<li>Make sure phonetic punctuation is enabled. Press NVDA+Alt+P to enable.</li>
<li>Phonetic punctuation rules can be configured via a dialog box in NVDA
preferences menu.</li>
<li>Phonetic punctuation comes with a set of predefined audio rules. However,
only a few of them are enabled by default. You can enable other rules, as
well as add new rules in the configuration dialog.</li>
<li>Audio rules are saved in a file called <code>phoneticPunctuationRules.json</code> in
NVDA user configuration directory.</li>
</ol>
<h2>Supported voice synthesizers</h2>
<p>Phonetic punctuation depends on new NVDA speech framework, and as of today
(October 2019), not all voice synthesizers have proper support for the new
commands. This means that phonetic punctuation might not work correctly with
some voice synthesizers.</p>
<p>Synthesizers known to work well with Phonetic Punctuation:</p>
<ul>
<li>Microsoft Speech API</li>
<li>eSpeak</li>
<li>Windows OneCore Voices</li>
</ul>
<p>Synthesizers known to have problems with PhoneticPunctuation:</p>
<ul>
<li>IBMTTS: see <a href="https://github.com/davidacm/NVDA-IBMTTS-Driver/issues/22">this
issue</a>.</li>
<li>RHVoice: Break command is not supported.</li>
</ul>
<h2>Copyright notice</h2>
<p>Built-in audio icons were designed by T.V. Raman and are a part of
emacspeak. For more information, see: https://github.com/tvraman/emacspeak/
.</p>
Report Passwordshttp://addons.nvda-project.org/addons/reportPasswords.hu.html2024-03-10T18:24:18Z2019-12-23T05:39:56Z
<ul>
<li>Authors: Noelia Ruiz Martínez</li>
</ul>
<p>This add-on adds the option of speaking the text typed in protected controls
like passwords, such as when logging into web-based email sites, where typed
characters are spoken as asterisks.</p>
<p>Note: NVDA has an option to configure if typed passwords will be spoken in
Windows terminals. This add-on won't affect those kinds of controls.</p>
<h2>How to configure</h2>
<p>The add-on can be configured from its category in the NVDA's settings
dialog, under NVDA's menu, Preferences submenu. A gesture for opening the
add-on settings panel can be assigned from Input gestures dialog,
configuration category.</p>
<p>Tip: If you have not configured NVDA to speak typed characters or words but
want to hear typed text in passwords, you may create a configuration profile
to enable the speaking of typed characters and passwords, and assign it to a
gesture or create a trigger to enable it automatically in certain
situations. For convenience, NVDA will ask if you want to create a dedicated
profile when the add-on is installed.</p>
<h2>Changes for 4.0</h2>
<ul>
<li>Compatible with NVDA 2023.1.</li>
</ul>
<h2>Changes for 3.0</h2>
<ul>
<li>Cannot be run in secure mode.</li>
<li>Compatible with NVDA 2022.1.</li>
</ul>
<h2>Changes for 2.0</h2>
<ul>
<li>Compatible with NVDA 2021.1.</li>
</ul>
<h2>Changes for 1.0</h2>
<ul>
<li>Initial version.</li>
</ul>
Szintetizátor beállítási kör szerkesztőhttp://addons.nvda-project.org/addons/synthRingSettingsSelector.hu.html2023-05-10T20:38:33Z2019-10-01T15:58:56Z
<ul>
<li>Készítő: David CM</li>
<li><a href="https://www.nvaccess.org/addonStore/legacy?file=synthrings">stabil verzió</a> letöltése</li>
<li><a href="https://www.nvaccess.org/addonStore/legacy?file=synthrings">Fejlesztői verzió</a> letöltése</li>
<li>Támogatott NVDA kiadások: 2019.2 és újabb</li>
</ul>
<p>A bővítmény segítségével lehetőség van kiválasztani a szintetizátor beállítási körön megjelenő opciókat.</p>
<h2>Funkciók</h2>
<p>A kiegészítő az alábbi lehetőségeket kínálja</p>
<ul>
<li>Egy új kategóriát ad hozzá az NVDA beállításaihoz, ott lehet kiválasztani
a Szintetizátor beállítási kör opcióit.</li>
<li>A bővítmény beállításai is részét képezik az NVDA beállítási profiljának,
így lehetőség van eltérő beállításokat megadni a különböző profilokhoz.</li>
<li>Lecseréli az alapértelmezett szintetizátor beállítási kört, de annak
parancsai ugyanúgy működnek a bővítménnyel is.</li>
</ul>
<h2>Rendszerkövetelmények</h2>
<p>NVDA 2019.2 vagy újabb kiadás szükséges.</p>
<h2>Telepítés</h2>
<p>Szabványos NVDA bővítménycsomagként.</p>
<h2>Használat</h2>
<p>Az NVDA beállításai között a Szintetizátor beállítási kör kategóriában lehet
megadni, hogy mely opciók szerepeljenek a beállítási körön. Alapértelmezés
szerint az alábbiakat tartalmazza:</p>
<ul>
<li>nyelv</li>
<li>hangkarakter</li>
<li>változat</li>
<li>tempó</li>
<li>sebességfokozás</li>
<li>hangerő</li>
<li>magasság</li>
<li>intonáció</li>
</ul>
<p>Megjegyzés: A szintetizátor beálítási körbe csak olyan opciókat lehet
felvenni, amit az NVDA aktuálisan használt beszédszintetizátora támogat. A
választható opciók köre eltérhet a különböző beszédszintetizátoroknál.</p>
Debug Helperhttp://addons.nvda-project.org/addons/debugHelper.hu.html2024-02-13T14:34:56Z2019-08-30T15:30:10Z
<ul>
<li>Author: Luke Davis</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=debughelper">stable version</a></li>
</ul>
<p>The purpose of this add-on is to make debugging things in NVDA easier. New
features will be added based on user suggestions. All emails or <a href="https://github.com/XLTechie/debugHelper">GitHub
issues</a> with feedback or feature
ideas are most welcome.</p>
<h2>Key Command</h2>
<ul>
<li>NVDA+Shift+F1: Inserts a mark line in the NVDA log.</li>
</ul>
<h2>Explanation and Usage</h2>
<p>When you press the command key, the add-on inserts a line like the following
in the NVDA log (at the Info level):</p>
<pre><code>-- Mark 1 --
</code></pre>
<p>It will also announce: "Logged Mark 1!"</p>
<p>If you press the key again, you will get:</p>
<pre><code>-- Mark 2 --
</code></pre>
<p>and "Logged Mark 2!" will be spoken.</p>
<p>Let us say for example that you were about to perform a series of tasks,
that you know generate lengthy error content in the NVDA log. You are going
to post the relevant portions of your log to a mailing list or the <a href="https://github.com/nvaccess/nvda/issues">NVDA
GitHub issue tracker</a>. However you
don't want to hunt through your entire log to find the relevant content. So
you use this add-on to insert mark 1, right before you do the thing that
causes the first error. If you know something else will generate further
errors, or a different kind, you insert another mark to separate that error
from the previous one, or so you can say "this is what I was doing at mark
3, where some errors occurred." Another example: While using some
application, something happens that causes an error (maybe you hear the
Windows error sound). You want to go back and find that error later, but you
don't want to stop working and save the log right now. So you use this
add-on again, to insert a mark in your log. This time the mark will appear
after the errors in your log, instead of before. But either way, the marks
will help you narrow down the important sections of your log.</p>
<p>The mark lines shown above can be easily searched for with the find command
in a text editor such as Notepad or Notepad++. Additionally, by default,
there is a blank line inserted above each mark. Blank lines are also
possible after the mark. Blank lines can be helpful if you are using NVDA's
log viewer, or another text editor, and want to use the arrow keys to
quickly read up/down through the log, to find a particular mark. It is easy
to pick the word "blank" out of a bunch of text being spoken as you quickly
move through the log. If you arrow really fast, you might need more than one
blank line, which you can adjust in settings.</p>
<p>Note: The mark count will survive the reloading of plugins
(NVDA+Control+F3), but will start back at one if you restart NVDA.</p>
<h2>Configuration:</h2>
<p>In the Settings section of NVDA Preferences, you will find a "Debug Helper"
category. In the settings dialog you can change the number of blank lines
inserted before and after each mark line. The default is one line before,
and zero after, although you can use 0 through 10 lines for either. Under
the Tools category of NVDA's Input Gestures panel, you can change
NVDA+Shift+F1 to a key sequence of your choice.</p>
<h2>Changelog</h2>
<ul>
<li><p>Version 1.0.2 (2019-08-28)</p>
<ul>
<li>Translation and code cleanup.</li>
</ul>
</li>
<li><p>Version 1.0.1 (2019-08-26)</p>
<ul>
<li>Minor bugfix version to probably fix an install problem on certain
versions of Windows.</li>
</ul>
</li>
<li><p>Version 1.0 (2019-08-22)</p>
<ul>
<li><p>Initial release. Including following features:</p>
<ul>
<li>Ability to generate numbered mark lines in the log (at info
level).</li>
<li>Ability to add 0-10 blank lines before and after each mark line.</li>
<li>Configuration via NVDA settings dialog system.</li>
</ul>
</li>
</ul>
</li>
</ul>
Notepad++http://addons.nvda-project.org/addons/notepadPlusPlus.hu.html2023-05-10T20:38:33Z2019-08-11T13:52:23Z
<ul>
<li>Authors: Derek Riemer, Tuukka Ojala</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=NotepadPlusPlus">Stable Version</a></li>
</ul>
<p>This addon improves the accessibility of the notepad++ text editor. To learn
more, and to read the documentation before installation, visit <a href="https://github.com/derekriemer/nvda-notepadplusplus">the addons
github page</a></p>
Beep Keyboardhttp://addons.nvda-project.org/addons/beepKeyboard.hu.html2023-05-10T20:38:32Z2019-05-20T16:57:49Z
<ul>
<li>Author: David CM</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=beepkeyboard">stable version</a></li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=beepkeyboard">Development version</a></li>
<li>NVDA compatibility: 2018.2 to 2019.2</li>
</ul>
<p>This add-on allows the user to configure NVDA to beeps with some keyboard
events.</p>
<h2>Features</h2>
<p>This add-on provides the following features you can use to adapt NVDA
keyboard behavior:</p>
<ul>
<li>Beep for uppercases when caps lock is on: if this feature is enabled, NVDA
will beep when you typing an uppercase and caps lock is on. Don't make any
more uppercase mistakes!</li>
<li>Beep for typed characters when shift is pressed: with this feature NVDA
will beep if you type a character with shift key pressed.</li>
<li>Beep for toggle keys changes: with this feature, NVDA will beep higher if
a toggle key goes on, and lower tone if it goes off. Please note that
Windows has a toggle keys beep function built-in on Ease of Access
Center. This native feature works well if you don't use laptop keyboard
layout setting.</li>
<li>Announce toggle keys changes: just when "Beep for toggle keys changes" is
on. You can enable or disable NVDA to announce toggle key status.</li>
<li>Beep for specified characters: NVDA will beep for all characters that you
set in advanced settings.</li>
<li>Disable beeping on password fields: this feature is enabled by default to
aboid security risks. Disable it if you want to hear beeps on password
fields.</li>
</ul>
<h2>Requirements</h2>
<p>You need NVDA 2018.2 or later.</p>
<h2>Installation</h2>
<p>Just install it as a NVDA add-on.</p>
<h2>Usage</h2>
<p>To enable or disable features, go to NVDA settings and select beep keyboard category. In that category you can configure all supported features by this add-on.</p>
<ul>
<li>"Beep for uppercases when caps lock is on" is enabled by default.</li>
</ul>
<p>If you need more settings, open the advanced settings dialog that contains
the following options:</p>
<ul>
<li>Ignored characters with shift pressed: all characters here will be ignored
to beeping when shift is pressed. Escape Sequences are allowed, e.g. "\t"
for tab, "\r" for carriage return.</li>
<li>Beep always for the following characters: set here all characters that you
want NVDA beeps for. Escape Sequences are allowed, e.g. "\t" for tab, "\r"
for carriage return.</li>
<li>Select tone to configure: you can configure parameters for all
tones. Select one here, and set the parameters in the next text
boxes. When change selection, NVDA will beep for the current selected tone
with the current parameters set in the dialog.</li>
<li>Tone pitch: tone pitch for the current selected tone.</li>
<li>Tone length: tone length for the current selected tone.</li>
<li>Tone volume: tone volume for the current selected tone.</li>
<li>Test tone: this button lets you to play a test with the current set
parameters.</li>
<li>Press OK button to save settings or cancel to discard.</li>
</ul>
Developer Toolkithttp://addons.nvda-project.org/addons/developerToolkit.hu.html2024-02-13T14:34:54Z2019-05-20T02:40:40Z
<ul>
<li>Author: Andy Borka</li>
<li>download <a href="https://www.nvaccess.org/addonStore/legacy?file=devtoolkit">stable version</a></li>
<li>download <a href="https://www.nvaccess.org/addonStore/legacy?file=devtoolkit-dev">development version</a></li>
<li>NVDA compatibility: 2019.1 to 2020.1</li>
</ul>
<p>Developer toolkit (DTK) is an NVDA add-on that helps blind and visually
impaired developers independently create visually appealing user interfaces
and web content. It provides gestures that enable you to navigate through
objects and obtain information about them, such as their size, position, and
characteristics. To begin using DTK, place focus on a control, then press
<strong>ALT+WINDOWS+K</strong>. To disable it, press <strong>ALT+WINDOWS+K</strong> again. When on the
web, press <strong>NVDA+SPACE</strong> to put NVDA in Focus Mode and press
NVDA+SHIFT+SPACE to disable Single Letter Navigation.</p>
<h2>Gestures</h2>
<p>The following gestures are available when DTK is enabled.</p>
<ul>
<li><strong>ALT+WINDOWS+K</strong> - Enable or disable DTK features.</li>
<li><strong>LEFT ARROW</strong> - Move to previous sibling.</li>
<li><strong>RIGHT ARROW</strong> - Move to next sibling.</li>
<li><strong>UP ARROW</strong> - Move to parent.</li>
<li><strong>DOWN ARROW</strong> - Move to first child.</li>
<li><strong>CTRL+HOME</strong> - Move to top-most parent.</li>
<li><strong>HOME</strong> - Move to the relative parent if one is assigned.</li>
<li><strong>A</strong> - In web content, speak HTML attributes. Press twice quickly to copy
to the clipboard.</li>
<li><strong>B</strong> - Speak the position of the object's bottom edge. Press twice
quickly to copy to the clipboard.</li>
<li><strong>SHIFT+B</strong> - Speak the distance between the object's bottom edge and the
relative parent's bottom edge. Press twice quickly to copy to the
clipboard.</li>
<li><strong>C</strong> - Speak the number of children contained inside the object. Press
twice quickly to copy to the clipboard.</li>
<li><strong>control+c</strong> - Switch between RGB, Hex, and Name color values.</li>
<li><strong>CTRL+D</strong> - Enable or disable detailed messages.</li>
<li><strong>F</strong> - In web content, speaks the object's font and formatting
information. Press twice quickly to copy to the clipboard.</li>
<li><strong>H</strong> - Speak the object's height. Press twice quickly to copy to the
clipboard.</li>
<li><strong>L</strong> - Speak the position of the object's left edge. Press twice quickly
to copy to the clipboard.</li>
<li><strong>n</strong> - Speak the object's name. Press twice quickly to copy to the
clipboard.</li>
<li><strong>CTRL+P</strong> - Set the relative parent for obtaining size/location of
objects.</li>
<li><strong>P</strong> - Speak the relative parent's name. Press twice quickly to copy to
the clipboard.</li>
<li><strong>R</strong> - Speak the position of the object's right edge. Press twice quickly
to copy to the clipboard.</li>
<li><strong>SHIFT+R</strong> - Speak the distance between the object's right edge and the
relative parent's right edge. Press twice quickly to copy to the
clipboard.</li>
<li><strong>ALT+R</strong> - Speak the object's Role/control type. Press twice quickly to
copy it to the clipboard.</li>
<li><strong>S</strong> - Speak the number of siblings relative to the object. Press twice
quickly to copy to the clipboard.</li>
<li><strong>SHIFT+S</strong> - Speak the object's control states. Press twice quickly to
copy it to the clipboard.</li>
<li><strong>T</strong> - Speak the position of the object's top edge. Press twice quickly
to copy to the clipboard.</li>
<li><strong>V</strong> - Speak Developer toolkit version. Press twice quickly to copy to
the clipboard.</li>
<li><strong>W</strong> - Speak the object's width. Press twice quickly to copy to the
clipboard.</li>
</ul>
<h2>Notes</h2>
<ul>
<li>When using home or any modified version of the home key, using the numpad
home key fails because NVDA will send the numpad7 keypress instead of a
numpadHome keypress. Other keyboard add-ons that attempt to reassign
numpad7 to the home key will fail in this add-on.</li>
<li><p>When using the relative parent feature, DTK will set the relative parent
to the desktop under the following conditions.</p>
<ul>
<li>The focused object and the relative parent are the same.</li>
<li>The relative parent is not a direct ancestor of the focused object.</li>
</ul>
</li>
<li><p>DTK cannot access information such as CSS rules, padding, borders, or
z-index. Doing so requires accessing them outside of the NVDA context,
which presents a security concern for users.</p></li>
</ul>
<h2>Known issues</h2>
<ul>
<li>The customizable list of font attributes found in Developer toolkit
settings may be cumbersome to use. This is a limitation found in NVDA's
user interface library.</li>
</ul>
<h2>Version history</h2>
<h3>20.04</h3>
<ul>
<li>Added a gesture (home) that gives the ability to move to the defined
relative parent.</li>
</ul>
<h3>20.03</h3>
<ul>
<li>Added a gesture (ALT+R) that obtains the currently focused object's
control type. Examples include button, listitem, list, checkbox, and
section.</li>
<li>Added a gesture (SHIFT+S) that obtains the currently focused object's
control states. Examples include focused, focusable, selected, checked,
pressed, and readonly.</li>
<li>Removed support for IAccessible's unique ID because it is not reliable in
most contexts.</li>
<li>Abbreviated the version number to xx.yy where xx is the last two digits of
the current year, and yy is the update number for the current year. Thus
20.03 is the third major update in 2020.</li>
</ul>
<h3>2020.2</h3>
<ul>
<li>Starting DTK retains the cursor’s current position in web content. If the
object under the caret can’t gain focus, DTK will place focus on the first
available ancestor.</li>
<li>Removed legacy support for unicode strings.</li>
<li>Removed the enable/disable Developer toolkit features setting from
Developer toolkit settings dialog found in NVDA
menu>preferences>settings. Users can still enable/disable features by
pressing alt+windows+k.</li>
<li><p>The formatting attributes obtained by pressing 'f' when Developer toolkit
is enabled is now configurable in preferences>settings>Developer toolkit.</p>
<ul>
<li>Add new formatting attributes by pressing the 'new attribute'
button. Type in a name of a valid formatting attribute, press tab to put
it in the list, then press escape to leave edit mode.</li>
<li>Remove an attribute by selecting it in the list, then pressing the
'delete attribute' button.</li>
<li>Rename an attribute by pressing the 'Rename attribute' button, typing a
new name, pressing tab to put it in the list, then pressing escape to
leave edit mode.</li>
<li>Move an attribute up in the list by selecting it and pressing the 'Move
up' button. Repeat this until it reaches the desired location in the
list.</li>
<li>Move an attribute down in the list by selecting it and pressing the 'Move
down' button. Repeat this until it reaches the desired location in the
list.</li>
</ul>
</li>
<li><p>Users now have the ability to change the way color values are displayed
while obtaining formatting information. The setting is found in
preferences>settings>Developer toolkit, then choosing a color display
format. The color display format can also be changed by pressing control+c
while Developer toolkit features are enabled.</p>
<ul>
<li><strong>RGB</strong> - Red/Green/Blue value. Defines a color through a red, green,
blue color combination. Good for graphic art, especially non-web safe
colors.</li>
<li><strong>Hex</strong> - string starting with a '#' and followed by 6 characters
consisting of 1-0 and A-F. Usually good for web content.</li>
<li><strong>Name</strong> - The human readable value for the color. Good for general
purpose usage and verifying other color value formats.</li>
</ul>
</li>
</ul>
<h3>2020.1.1</h3>
<ul>
<li>Improved unicode support.</li>
</ul>
<h3>2020.1.0</h3>
<ul>
<li>Developers now have the ability to focus on smaller areas of their user
interfaces by pressing CTRL+p to set a relative parent. Use a relative
parent as a reference point when obtaining size and location
information. To use this feature, enable DTK features, navigate to the
object to use as a relative parent, then press CTRL+p. Then, return to
your work as usual.</li>
<li>Press the letter p while working in DTK to obtain the relative parent's
name. Press twice quickly to copy to the clipboard.</li>
<li>Use SHIFT+b to obtain the distance between the focused object's bottom
edge and the relative paren'ts bottom edge. DTK features must be enable to
use this feature.</li>
<li>Use SHIFT+r to obtain the distance between the focused object's right edge
and the relative paren'ts right edge. DTK features must be enable to use
this feature.</li>
<li>DTK now gracefully handles configuration profile switches.</li>
<li>Removed '-preview' from the version number to avoid version number
problems with add-on updater.</li>
</ul>
<h3>2020.0 preview</h3>
<ul>
<li>Changed version number to 2020.0 preview to reflect the impending switch
to Python 3.</li>
<li>Added Python 3 compatibility.</li>
<li>Added a new gesture, "n" that speaks the object's name. If one is not
assigned, speaks the word 'None' as the object's name.</li>
<li>DTK no longer adds duplicate settings panels in the NVDA settings window
when reloading add-ons.</li>
</ul>
<h3>2019.1.2</h3>
<ul>
<li>DTK will now report size and position values if they are 0.</li>
<li>Navigation now honors the detailed messages setting.</li>
<li>Made reporting of size/position information more concise.</li>
<li>Stability improvements.</li>
</ul>
<h3>2019.1.1</h3>
<ul>
<li>DTK will no longer attempt to load itself multiple times when announcing
the version number.</li>
<li>DTK features will be disabled on install. Previously, DTK features were
enabled on install. This is different than enabling or disabling the
add-on in the NVDA toolls>manage add-ons window.</li>
<li>Messages presented to the user can now contain non-ascii characters.</li>
<li>Pressing gestures such as a, b, c, f, h, l, r, s, t, v, and w no longer
interupt NVDA speech when copying to the clipboard.</li>
</ul>
<h3>2019.1</h3>
<ul>
<li>Fixed a compatibility problem where DTK declared a minimum NVDA version
that hasn't been released yet.</li>
</ul>
<h3>2019.0 (initial stable release)</h3>
<ul>
<li>Initial build with basic navigation.</li>
</ul>
Add-ons documentationhttp://addons.nvda-project.org/addons/addonsHelp.hu.html2024-02-13T14:38:33Z2019-05-10T03:54:05Z
<h2>Information</h2>
<ul>
<li>Authors: Rui Fontes, Ângelo Abrantes, Zougane, Remy, Abdel and
colaboration of James Scholes</li>
<li>Updated in 21/03/2022</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=addonshelp">stable version</a></li>
<li>Compatibility: NVDA 2017.2 and beyond</li>
</ul>
<h2>Presentation</h2>
<p>This add-on provides a quick way to access documentation for the add-ons you
have installed. It creates, in the NVDA Help menu, two sub-menus. One,
called "Running add-ons documentation", groups the documentation for each
add-on and make available a list of commands for all running add-ons, with a
table for each add-on. The other sub-menu, called "Disabled add-ons
documentation", lists the disabled add-ons, gaving access to its
documentation. Please, remember that the Synth and Braille drivers add-ons
will not appear in any of the above categories. Note that you also can
access the add-ons documentation through the Add-ons manager in NVDA, Tools
menu. Here you have also the information about the state of an add-on. Also
remember that you can access the NVDA and add-ons commands in the Input
gestures dialog. However, in this dialog the add-ons commands are not
grouped and you can not find a command containing "windows", by instance...</p>
<h2>Changes</h2>
<h3>Version 2022.03</h3>
<ul>
<li>Adaptation to NVDA 2022.1</li>
</ul>
<h3>Version 21.05</h3>
<ul>
<li>Adaptation to NVDA 2021.1</li>
</ul>
<h3>Version 2.1</h3>
<ul>
<li>Adaptation to NVDA 2019.3</li>
</ul>
<h3>Version 2.0</h3>
<ul>
<li>Now, the add-on creates two menus in the NVDA Help menu.</li>
<li>The "Running add-ons documentation" menu, have one more option to display
the "List of commands for running add-ons", containing the commands for
each add-on in a table.</li>
<li>The "Disabled add-ons documentation" menu only group the disabled add-ons
with documentation files.</li>
<li>Note that Synth and Braille drivers add-ons never are listed in the above
menus.</li>
<li>The add-ons are now represented by their summary and not by their name.</li>
<li>Some improvements in the code.</li>
</ul>
<h3>Version 1.2</h3>
<ul>
<li>Small issues fixed;</li>
<li>Fixed importing submenu name from add-on summary;</li>
<li>Force documentation to open in default browser, if possible in a new
window.</li>
</ul>
<h3>Version 1.1</h3>
<ul>
<li>Compatibility with Python 3;</li>
<li>New way to add submenus;</li>
<li>Changed the name of the menu itens to the summary addon to have the name
of the menus in the language of the interface, when possible.</li>
</ul>
<h3>Version 1.0</h3>
<ul>
<li>Initial release by Zougane, Remy and Abdel updated to be compatible with
NVDA 2019.1.</li>
</ul>
Character Informationhttp://addons.nvda-project.org/addons/charInfo.hu.html2024-02-15T10:17:43Z2019-04-25T19:09:30Z
<ul>
<li>Author: Cyrille Bougot</li>
<li>NVDA compatibility: 2022.3.3 and beyond</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=charInfo">stable version</a></li>
</ul>
<p>This add-on allows to present in a message various information about a
character. It also allows to customize the information reported on a
character when using review cursor character navigation commands or multiple
presses of the review character command.</p>
<h3>Features</h3>
<ul>
<li>Display detailed information on a character, e.g. Unicode name, number,
CLDR, symbol name, etc.</li>
<li>This information can be displayed either at the location of the review
cursor or at the location of the system cursor.</li>
<li>Customize the reported information when pressing <code>numpad2</code>.</li>
<li>Use the same custom information when moving the review cursor by
character.</li>
</ul>
<h2>Commands</h2>
<ul>
<li><code>Numpad2</code> (all keyboard layouts) or <code>NVDA+.</code> (laptop layout): when pressed
4 times, displays information about the character of the current navigator
object where the review cursor is situated. This command can also be
customized in the settings of the add-on.</li>
<li>Unassigned: Presents a message with detailed information on the character
where the review cursor is situated. If you feel uncomfortable with the
four press gesture, you may use this command instead.</li>
<li>Unassigned: Presents a message with detailed information on the character
at the position of the caret (works only in places where there is a
caret).</li>
<li>Unassigned: Opens Character Information add-on settings.</li>
</ul>
<p>The unassigned commands need first to be assigned in the Input gestures
dialog to be used.</p>
<h2>Detailed information on a character</h2>
<p>The presented information include the following sections:</p>
<ul>
<li>Unicode: information from Unicode norm, i.e. name, CLDR name, value,
block, etc.</li>
<li>MS font, only for characters written with proprietary Microsoft fonts
(Symbol, Wingding 1, 2, 3 and Webding): name and information about the
equivalent Unicode character.</li>
<li>NVDA symbol description: information allowing to understand how NVDA
reports the symbol description. NVDA uses the information in the top most
rows containing available information to provide the description of a
symbol.</li>
<li>NVDA character description: information allowing to understand how NVDA
reports the character description (e.g. "alpha" for "A"). NVDA uses the
information in the top most rows containing available information to
provide the description of a character.</li>
</ul>
<p>The provided information in the Unicode section is in English since it is
part of Unicode norm. If a local translation exists for this add-on, the
information is also provided alongside with English.</p>
<h2>Settings</h2>
<p>This add-on has its own category in NVDA's settings dialog where you can
configure the following options.</p>
<h3>Action for multiple presses of the report review character command</h3>
<p>The three combo boxes of this group allow to customize what is reported by
the report review character command (<code>numpad2</code>) when using two, three or
four presses. By default, NVDA reports the character description on second
press and its numeric value, decimal and hexadecimal, on third press. You
can change what is reported on the character at the position of the review
cursor upon multiple presses. For example, you can report its CLDR English
name on second press, its Unicode name on third press and display detailed
information on it on fourth press.</p>
<h3>Remember these action during character navigation</h3>
<p>When you have reported specific information with the report review character
command (<code>numpad2</code>) called multiple times, you may want to continue
reporting the same information while navigating with the review cursor
(<code>numpad1</code> and <code>numpad3</code>). Checking this option will allow you to do it, as
long as you navigate with the review cursor by character just after a
multiple press of <code>numpad2</code>.</p>
<h2>Change log</h2>
<h3>Version 3.0</h3>
<ul>
<li>It is now possible to configure the property reported for the character
under the review cursor upon multiple presses on <code>numpad2</code>. Optionally,
after having used multiple press on <code>numpad2</code>, the last reported property
can also be reported as long as you navigate by character with the review
cursor (<code>numpad1</code> and <code>numpad3</code>).</li>
<li>Prepares compatibility with NVDA 2024.1: speech on-demand support.</li>
<li>Addresses potential security issues related to <a>GHSA-xg6w-23rw-39r8</a>
when using the add-on with older versions of NVDA. However, it is
recommended to use NVDA 2023.3.3 or higher.</li>
</ul>
<h3>Version 2.6</h3>
<ul>
<li>Update to Unicode 15.1.</li>
<li>Adds support for Python 3.11 to prepare compatibility with NVDA 2024.1.</li>
<li>Note: From now on, translation updates will not appear anymore in the
change log.</li>
</ul>
<h3>Version 2.5</h3>
<ul>
<li>Fixed import error with last NVDA alpha versions, NVDA 2023.2 development
cycle (contribution Noelia Ruiz Mart�nez).</li>
</ul>
<h3>Version 2.4</h3>
<ul>
<li>Updated localizations.</li>
</ul>
<h3>Version 2.3</h3>
<ul>
<li>Updated localizations.</li>
</ul>
<h3>Version 2.2</h3>
<ul>
<li>Removed the dev channel.</li>
<li>Updated localizations.</li>
</ul>
<h3>Version 2.1</h3>
<ul>
<li>Fixed some bugs preventing the character information report to be
displayed when some options were used.</li>
<li>Updated localizations.</li>
</ul>
<h3>Version 2.0</h3>
<ul>
<li>Enhanced the character information report with information on NVDA symbol
and NVDA character description.</li>
<li>Added the support of compound character, e.g. letters with diacritic
consisting in two or more Unicode characters.</li>
<li>Update to Unicode 15.0</li>
<li>Updated French block data.</li>
<li>Viewing character information is not allowed on lock screen and secure
screens.</li>
<li>On Windows lock screen, the script to review the current character can now
operate normally (single, double or triple press).</li>
<li>Compatibility with NVDA 2023.1.</li>
<li>Drops compatibility with NVDA below 2022.3.3. The last version compatible
with NVDA 2019.3 is the <a>1.8</a>.</li>
<li>Update localizations.</li>
</ul>
<h3>Version 1.8</h3>
<ul>
<li>Update to Unicode 14.0.</li>
<li>Compatibility with NVDA 2022.1.</li>
<li>Drops compatibility with NVDA below 2019.3. The last version compatible
with NVDA 2017.3 is the <a>1.7</a>.</li>
<li>The release is now performed thanks to a GitHub action instead of
appVeyor.</li>
<li>Update localizations.</li>
</ul>
<h3>Version 1.7</h3>
<ul>
<li>Added localizations.</li>
</ul>
<h3>Version 1.6</h3>
<ul>
<li>Compatibility NVDA 2021.1.</li>
</ul>
<h3>Version 1.5</h3>
<ul>
<li>Prepare compatibility with NVDA 2021.1 (contribution Lukasz Golonka).</li>
<li>Update along with last modifications on add-on template.</li>
</ul>
<h3>Version 1.4</h3>
<ul>
<li>Added a script to get information for the character at the caret position
(contribution Lukasz Golonka).</li>
<li>Update to Unicode 13.0.</li>
</ul>
<h3>Version 1.3</h3>
<ul>
<li>Fixes a bug with NVDA 2019.3.</li>
</ul>
<h3>Version 1.2</h3>
<ul>
<li>Provides additional information on characters written with Microsoft
fonts.</li>
</ul>
<h3>Version 1.1</h3>
<ul>
<li>Updates to support newer versions of NVDA (Python 2 and 3 compatible)</li>
<li>Releases performed now with appveyor</li>
</ul>
<h3>Version 1.0</h3>
<ul>
<li>Initial release.</li>
</ul>
<p>https://github.com/CyrilleB79/charInfo/releases/download/V1.7/charInfo-1.7.nvda-addon</p>
<p>https://github.com/CyrilleB79/charInfo/releases/download/V1.8/charInfo-1.8.nvda-addon</p>
<p>https://github.com/nvaccess/nvda/security/advisories/GHSA-xg6w-23rw-39r8#event-132994</p>
Addon to count elements of selected texthttp://addons.nvda-project.org/addons/wordCount.hu.html2023-05-10T20:38:33Z2019-04-08T16:02:17Z
<ul>
<li>Authors: Rui Fontes <a href="mailto:rui.fontes@tiflotecnia.com">rui.fontes@tiflotecnia.com</a> and Angelo Abrantes
<a href="mailto:ampa4374@gmail.com">ampa4374@gmail.com</a></li>
<li>Updated in 21/03/2022</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=wordCount">stable version</a></li>
<li>Compatibility: NVDA version 2019.3 and beyond</li>
</ul>
<h2>Use</h2>
<p>This addon announces the number of words, characters, paragraphs and lines
of the selected text by pressing Control+Shift+F12. It also create a
ordered list of the words used and allow to display the lines containing a
word.</p>
<p>In any text editor, or in a virtual document, for example in a web browser,
PDF, email body, etc., select the desired text using the usual text
selection commands and press Control+Shift+f12.</p>
<p>To get a list of words used, just press Control+Shift+f11.</p>
<p>This commands can be modified in the "Input gestures" dialog in the "Text
editing" section.</p>
Időjárás-előrejelzőhttp://addons.nvda-project.org/addons/Weather_Plus.hu.html2024-02-13T14:38:41Z2019-03-16T05:24:15Z
<ul>
<li>Készítő: Adriano Barbieri</li>
<li>NVDA compatibility: 2017.3 to beyond</li>
<li><a href="https://www.nvaccess.org/addonStore/legacy?file=Weather_Plus">Stabil Verzió</a> letöltése</li>
</ul>
<h1>Az időjárás-előrejelzőről:</h1>
<ul>
<li>This plugin adds local temperature and forecasts to 24 hours up to 2
additional days and hourlyforecast for NVDA.</li>
<li>Copyright (C) <a href="mailto:adrianobarb@yahoo.it">Adriano Barbieri</a></li>
<li>A GNU GPL (Általános nyilvános Licenc) v2 hatálya alá tartozik.</li>
<li>Az Időjárás-előrejelző az alábbi szolgáltatásokat használja:</li>
<li><a href="https://www.weatherapi.com/">https://www.weatherapi.com/</a></li>
<li><a href="http://www.geonames.org/">http://www.geonames.org/</a></li>
<li><a href="http://veloroutes.org/elevation/">http://veloroutes.org/elevation/</a></li>
<li><a href="http://www.nvda.it/">http://www.nvda.it/</a></li>
</ul>
<h1>Billentyűparancsok:</h1>
<ul>
<li>NVDA+w: Aktuális hőmérséklet és időjárási viszonyok lekérdezése.</li>
<li>Press NVDA+shift+W to get 24 hours forecast and forecast up to 2 days.</li>
<li>Press NVDA+shift+W twice to get hourlyforecast of temperature and
atmospheric conditions.</li>
<li>NVDA+Shift+Ctrl+w: ideiglenes város beálítása</li>
<li>NVDA+shift+ctrl+alt+w: Az időjárás-előrejelző beállításai</li>
<li>NVDA+Alt+w: megadja, hogy mikor frissültek legutóbb az időjárási adatok.</li>
<li>Ctrl+Shift+w: Váltás a hőmérsékleti skálák között (Fahrenheit, Celsius és
Kelvin)</li>
</ul>
<h1>Az Időjárás-előrejelző beállítása</h1>
<ul>
<li>You must set the Weather Plus addon before its first use! Go to the Preferences submenu, Weather Plus Settings submenu and choose one of the following options:</li>
<li>Set and Manage Your Cities... - Displays or allows to set the current city from a list.</li>
<li>Set a temporary city... - Displays and allows to set one temporary city from a list if available.</li>
<li>Documentation - Opens the help file for the current language.</li>
<li>Check for Update... - Notifies about the availability of the new version.</li>
</ul>
<p>Új város hozzáadásához használja a következő menüpontot</p>
<ul>
<li>Városok beállítása és kezelése... - Városok megjelenítése, vagy
importálása egy listából.</li>
<li>A következő üzenet csak az első alkalommal jelenik meg: Beállítások
Alapértelmezett nincs megadva F1: Súgó, F2: utolsó kijelölt lapfül, F3:
Lista és szerkesztőmező, F4: Előrejelzés napok száma, F5: Hangerő.</li>
<li>In the edit box, enter a City or choose one from the list, if
available. Note: The F5 key is available if the sound effects are
activated.</li>
<li>A párbeszédpanelen az alábbi gombok találhatók:</li>
<li>Test - Test the validity of the city and find the data of it.</li>
<li>Hozzáadás - Hozzáadja a jelenlegi várost a listához. A gomb csak akkor
aktiválható ha a listáról választott várost vagy pedig a beírt város
szerepel az adatbázisban, azaz megfelelt az ellenőrzésen.</li>
<li>Részletek - Részleteket jelenít meg a jelenlegi városról. A gomb csak
akkor működik, ha a megadott várost már elfogadta a rendszer.</li>
<li>Definiálás - Megadható a régió típusa a hangeffektek hozzárendeléséhez. A
gomb csak akkor működik, ha a hangeffektek telepítve és aktiválva vannak.</li>
<li>Alapértelmezett - Beállítja a jelenlegi várost alapértelmezett helyként,
mindig ez fog megjelenni, amikor a bővítmény elindul. Csak olyan várost
lehet megadni alapértelmezettként, amit a rendszer már elfogadott.</li>
<li>Eltávolítás - Eltávolítja a jelenlegi várost a listáról.</li>
<li>Átnevezés - Átnevezi a jelenlegi várost. Csak olyan várost lehet
átnevezni, ami már szerepel a saját városok listáján.</li>
<li>Városok importálása - Új városokat adhat hozzá *.zipcodes kiterjesztésű
fájlokból. Csak azok a városok kerülnek fel a saját városok listájára,
amiknél bejelöli a megfelelő jelölőnégyzetet.</li>
<li>Városok exportálása - Elmenti a városlistát egy megadott *.zipcodes
kiterjesztésű fájlba. A funkció csak akkor működik, ha legalább egy várost
már felvett a listájára.</li>
<li>hourly forecast setting... - This button allows you to choose the contents
of the hourly forecast report.</li>
<li>Hőmérsékleti skála - Használja a választógombot a kívánt skála
beállításához. Celsius az alapértelmezett beállítás, de választhat még
Fahrenheit és kelvin közül is.</li>
<li>Mértékegység megjelenítése - Itt lehet beállítani, hogyan jelenjenek meg a
hőfok értékek egységei a beállítottt skálának megfelelően. Teljes névvel,
egybetűs jelöléssel, vagy ne jelenjen meg mértékegység az értékek után.</li>
<li>Combo box: Weather Forecasts up to days: 1; you can choose between 1 to 3
(1 days by default)</li>
<li>Combo box: API response language: English, en; you can choose the language
of the weather conditions text.</li>
<li>A következő opciók használatához jelölje be a jelölőnégyzeteket:</li>
<li>Időjárás-előrejelzés másolása a vágólapra, a város részletes adataival
együtt - alapértelmezés szerint ki van kapcsolva.</li>
<li>Hangeffektek az időjárási viszonyokhoz - Ezzel a jelölőnégyzettel lehet
kezelni a hangeffekteket. Amennyiben az effektek telepítve vannak és a
jelölőnégyzet is be van jelölve, elérhetővé válik a hangerő beállítása is.</li>
<li>Kapcsolódó opció: Csak időjárási hangok.</li>
<li>Megváltoztathatja a hangerőt és az utoljára hallott effektet. A
jelölőnégyzet alapértelmezés szerint ki van kapcsolva.</li>
<li>Csak időjárási hangok - Ha be van jelölve,akkor a program csak az
időjárási hangokat játssza le a környékhez kapcsolódó hangokat
nem. Alapértelmezés szerint ki van kapcsolva.</li>
<li>24 órás formátum - Ha a jelölőnégyzet nincs bejelölve, a bővítmény által
megjelenített helyi idők 12 órás formátumban lesznek hallhatók. Pl. 10 AM,
13 PM. Alapértelmezés szerint be van kapcsolva.</li>
<li>Súgószövegek a gombokon - Alapértelmezés szerint be van jelölve.</li>
<li>Szélviszonyok - A jelölőnégyzet bejelölése után további opciók jelennek
meg. Itt lehet megadni, hogy milyen információkat szeretnénk az
előrejelzésben a szélviszonyokról.</li>
<li>Szélirány</li>
<li>Szélsebesség</li>
<li>Szélsebesség méter per szekundumban - ha nincs bejelölve akkor az érték
kilométer per órában jelenik meg.</li>
<li>Add wind gust speed of the wind; checkbox checked (by default)</li>
<li>Hőérzet - a szél befolyása a mért hőmérséklet érzékelésére.</li>
<li>Légköri viszonyok - Bejelölés után további opciókat lehet elérni:</li>
<li>Páratartalom - a levegő páratartalma százalékban</li>
<li>Látótávolság - kilométerben vagy mérföldben.</li>
<li>Légnyomás - a bejelölés után megadható, hogy milyen mértékegységben
szeretnénk. Légnyomás higanymilliméterben (mmHg) jelölőnégyzet ha be van
jelölve, akkor a légnyomás értéke higanymilliméterben, ha nincs bejelölve
akkor barban jelenik meg.</li>
<li>Légnyomás tendenciája - Stagnál, emelkedik vagy csökken.</li>
<li>Add cloudiness value; check box checked (by default)</li>
<li>Add precipitation value; check box checked (by default)</li>
<li>Add ultraviolet radiation value; check box checked (by default)</li>
<li>Read astronomical information; indicates the time of sunrise and sunset
and the time of moonrise and moonset. Checkbox not checked (by default)</li>
<li>Tizedesvessző használata pont helyett - ha be van jelölve,akkor a
tizedesértékeket tizedesvesszővel választja el, ha nincs bejelölve, akkor
ponttal.</li>
<li>Frissítések keresése - ha be van jelölve, akkor mindig figyelmeztet, ha a
bővítményhez frissítés érhető el. A bővítmény saját frissítési rendszerrel
működik, nem szerepel a Bővítményfrissítőben.</li>
<li>Az Ok gomb lenyomásával jóváhagyhatja a beállításokat, a mégse gomb
lenyomásával marad minden a korábbi állapotában.</li>
<li>Ha módosította a városok listáját és mégis a mégse gombot nyomja meg, a
program figyelmeztet, és lehetővé teszi a városok listájának mentését a
többi beállítástól függetlenül.A program beállításai az alábbi fájlokban
találhatók:</li>
<li>"Weather.ini": Indítási beállítások</li>
<li>"Weather.volumes": Egyéni hangerőértékek.</li>
<li>"Weather.zipcodes": a városok listája WOEID kódjukkal és a részleteikkel.</li>
<li>"Weather.default": Your default city.</li>
<li>"Weather_searchkey": mentett keresőszó</li>
</ul>
<hr />
BrowserNavhttp://addons.nvda-project.org/addons/browsernav.hu.html2023-05-23T22:52:53Z2019-02-24T23:29:19Z
<ul>
<li>Author: Tony Malykh</li>
<li>NVDA compatibility: from 2019.3 to 2023.1</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=browsernav">stable version</a></li>
</ul>
<h1>BrowserNav addon for NVDA</h1>
<p>This add-on provides NVDA users powerful navigation commands in browser
mode. It works in web browsers, as well as any other applications that
support NVDA browse mode, such as Word documents and email clients.</p>
<p>For example, with BrowserNav you can find vertically aligned paragraphs,
that is paragraphs with the same horizontal offset. This can be used to read
hierarchical trees of comments or malformed HTML tables.</p>
<p>You can also find paragraphs written in the same font size or style.</p>
<p>BrowserNav also provides new QuickNav commands: P for next paragraph and Y
for next tab.</p>
<h2>Download</h2>
<ul>
<li>Current stable version:
<a href="https://github.com/mltony/nvda-browser-nav/releases/latest/download/browsernav.nvda-addon">BrowserNav</a></li>
<li>Last Python 2 version (compatible with NVDA 2019.2 and prior): <a href="https://github.com/mltony/nvda-browser-nav/releases/download/v1.1/BrowserNav-1.1.nvda-addon">BrowserNav
v1.1</a></li>
</ul>
<h2>Usage in browsers and other programs that support browse mode</h2>
<p>BrowserNav can be used to navigate by horizontal offset from the left edge
of the screen, by font size, or by font style.</p>
<ul>
<li>When navigating by horizontal offset, you can easily find paragraphs that
are vertically aligned on the page. IN particular, you can press
NVDA+Alt+DownArrow or UpArrow to jump to the next or previous paragraph
that has the same offset. For example, this can be useful when browsing
hierarchical trees of comments (e.g. on reddit.com) to jump between first
level comments and skipping all the higher level comments.</li>
<li>When navigating by font size, you can easily find paragraphs written in
the same font size, or smaller/greater font size.</li>
<li>You can also navigate by font size with the constraint of same font style.</li>
</ul>
<p>BrowserNav rotor is used to switch between these options. Depending on the
setting of this rotor, BrowserNav will indicate with beeps either horizontal
offset or font size of currently selected item. In addition, BrowserNav will
crackle on QuickNav commands to indicate how much text has been skipped over
(this feature is only available in Google Chrome and Firefox).</p>
<p>BrowserNav works in any browser supported by NVDA. Although some features
may not be available in all browsers. BrowserNav also works in other
applications that support NVDA browse mode, such as Word documents and email
clients.</p>
<h2>Keystrokes:</h2>
<ul>
<li>NVDA+Alt+UpArrow or DownArrow: Jump to previous or next paragraph with the
same horizontal offset or font size.</li>
<li>NVDA+Alt+Home or NVDA+alt+LeftArrow: Jump to previous paragraph with
lesser offset or greater font size (parent paragraph).</li>
<li>NVDA+Alt+End or NVDA+Control+alt+LeftArrow: Jump to next paragraph with
lesser offset or greater font size (next parent paragraph).</li>
<li>NVDA+Alt+PageDown or NVDA+Alt+RightArrow: Jump to next paragraph with
greater offset or smaller font size (child paragraph).</li>
<li>NVDA+Alt+PageUp or NVDA+Control+Alt+RightArrow: Jump to previous paragraph
with greater offset or smaller font size (previous child paragraph).</li>
<li>NVDA+O: Switch rotor setting between horizontal offset, font size, font
size with font style.</li>
<li>Y or Shift+Y: Jump to next or previous tab.</li>
<li>P or Shift+P: Jump to next or previous dialog.</li>
<li>Z or Shift+Z: Jump to next or previous menu.</li>
<li>` orShift+` (backquote or tilde): Jump to next or previous format
change.</li>
<li>\ or Shift+\ (backslash): Scroll up or down to reveal each page element;
can be useful in dynamic web pages to load all the elements; also can be
useful in infinite scroll webpages to load the next chunk.</li>
<li>0 or Shift+0: Jump to next or previous tree view.</li>
<li>9 or Shift+9: Jump to next or previous tool bar.</li>
<li>NVDA+Shift+LeftArrow: Go back to previous location of cursor within
current document.</li>
<li>NVDA+E: edit semi-accessible edit boxes - see corresponding section below.</li>
<li>T or Shift+T: jump to next or previous table, but place the cursor in the
first cell. Sometimes NVDA puts the cursor just before the first cell and
BrowserNav fixes this behavior.</li>
</ul>
<h2>Bookmarks</h2>
<p>BrowserNav 2.0 introduces a new set of bookmark features .</p>
<h3>Bookmark keystrokes</h3>
<ul>
<li>NVDA+J: Show quickJump popup menu.</li>
<li>J or Shift+J: Jump to next or previous QuickJump bookmark.</li>
<li>/ and Control+/: Toggle SkipClutter mode for navigating by line (Up and
Down arrows) and by paragraph (Control+Up and Control+Down arrows)
correspondingly.</li>
<li>Alt+J: click all AutoClick bookmarks on current page.</li>
<li>Alt+1, Alt+2, ..., Alt+0: jump to next hierarchical bookmark of
corresponding level. 0 corresponds to level 10.</li>
<li>Shift+Alt+1, Shift+Alt+2, ..., Shift+Alt+0: jump to previous hierarchical
bookmark.</li>
<li>Alt+<code>or Shift+Alt+</code>: jump to next or previous hierarchical bookmark of
any level.</li>
</ul>
<h3>Sites</h3>
<p>The first thing you would need to configure is the site where you want to
create bookmarks. In most cases you would want to specify match type to be
either domain match or Match domain and its subdomains. To illustrate the
latter option, you can specify:</p>
<ul>
<li>URL: amazon.com</li>
<li>Match type: Match domain and its subdomains</li>
<li>This will match amazon.com, smile.amazon.com and all other *.amazon.com
domains.</li>
</ul>
<p>If you need finer control, you can also specify exact URL or define a
regular expression for URL.</p>
<p>Because of this flexible definition, on every given webpage multiple
QuickJump sites might be active at the same time.</p>
<h3>Bookmark types</h3>
<p>Once you have configured site definition, you can proceed to define some
bookmarks on it.</p>
<p>BrowserNav currently supports four types of bookmarks:</p>
<ul>
<li>QuickJump bookmarks: you can jump to them by pressing J or Shift+J.</li>
<li>SkipClutter bookmarks: These bookmarks are skipped automatically when
navigating by line (Up/Down arrow) or by paragraph (Control+Up/Down
arrows). This allows to hide clutter on webpages, such as empty lines,
timestamps and any other redundant information. The information is not
removed completely, SkipClutter can be temporarily disabled via / or
Control+/ commands. By default SkipClutter skips empty paragraphs on all
websites.</li>
<li>AutoClick bookmarks: you can mark clickable elements, such as links,
buttons or checkboxes to be autoClick bookmarks. Then by pressing Alt+J
you can quickly press all autoClick bookmarks on current page with a
single keystroke without moving the cursor. This can come in handy to
press a frequently used button on a website, such as play button on
YouTube or Mute button on video-conferencing websites.</li>
<li>Hierarchical bookmarks: this is similar to quickJump bookmarks, but this
takes into account horizontal offset of a bookmark. Sites like Reddit and
Hacker News have a hierarchical tree of comments, that was pretty
challenging to efficiently navigate for screenreader users. On these
websites you can mark comments as a hierarchical bookmark and then you can
navigate between them By pressing Alt+digit or Shift+Alt+ditgit, where
digit stands for number row 1,2,3,...0 - that is the level of the
comment. By default BrowserNav has hierarchical bookmarks configured for
Hacker News and old.reddit.com; it was however too difficult to configure
them for modern reddit.com website since there doesn't appear to be easily
searcheable paragraph that would identify comments.</li>
</ul>
<h3>Creating a new bookmark</h3>
<p>Once you have configured a site, the easiest way to create a new bookmark would be to navigate to the desired paragraph in the document , press NVDA+J to show bookmarks context menu and select Bookmarks > Create new bookmark for site ...</p>
<p>Bookmark configuration dialog will open. You can now customize bookmark. You
can change how text is matched (e.g. string match or regular expression).</p>
<p>Other options in this dialog:</p>
<ul>
<li>Category: defines bookmark type.</li>
<li>Display name: optional name of this bookmark for better readability. This
just gives a better name so that you can identify this bookmark in a long
list of bookmarks.</li>
<li>Spoken message when bookmark is found: optional message to speak every
time you hit this bookmark in the document.</li>
<li>Offset in paragraphs: after finding matched text BrowserNav will then
shift cursor by this many paragraphs forward or back. This can be useful
for example if target text that you want to jump to doesn't contain any
common text that can be matched (e.g. forum post), but a preceding
paragraph contains a matchable word (e.g. upvote). In this case you can
match the word upvote and specify offset=1, to place the cursor on the
first paragraph of the post instead of the word upvote.</li>
<li>Attributes: space-separated list of paragraph attributes that are matched
against. The list of available attributes for current paragraph is
available in the next form field. List of attributes is prepopulated with
some common roles and typically you don't need to edit it.</li>
<li>Available attributes in current paragraph : these are all the attributes
found in current paragraph. You can select and press Space to add them to
the list of matched attributes.</li>
</ul>
<h3>Advanced site options</h3>
<p>In site configuration dialog you can specify a number of advanced options:</p>
<ul>
<li>Display name: optional display name for better readability in the list of
sites.</li>
<li>Focus mode: this allows to override default handling of focus events in
NVDA. Certain websites misuse focus events. In order to use them more
conveniently, you can either ignore focus events, or alternatively disable
automatic entering of focus mode when a focus event is received.</li>
<li>Live region mode: Some website misuse live regions. This option allows to
disable live region announcements for current website only.</li>
<li>Debug beep mode: this is mostly good for debugging purposes. You can make
NVDA beep when certain event (focus, live region update or successful
autoClick) happened.</li>
<li>AutoClick options: when you set up QuickClick bookmark, this allows you to
configure this bookmark to be pressed automatically after a certain delay
once the website is fully loaded. Another option allows BrowserNav to keep
monitoring the website and whenever any more of such QuickClick bookmarks
appear, it would click them automatically still. Please note that this
feature is experimental.</li>
</ul>
<h3>Configuration</h3>
<p>Bookmark definitions are stored in NVDA configuration directory in file
<code>browserNavRules.json</code>. You can edit this file manually or share it with
someone.</p>
<p>NVDA Configuration directory can be found by opening Start menu and typing:
Explore NVDA user configuration directory.</p>
<p>BrowserNav comes with default configuration file with sample bookmarks.</p>
<h2>Editing semi-accessible edit boxes</h2>
<p>Many modern web applications, notably Jupyter among others, use edit boxes,
that are not that accessible, e.g. they appear blank, but you can copy text
in and out of them using Control+A, Control+C and Control+V keystrokes.</p>
<p>BrowserNav offers an experimental feature to edit those edit boxes in a more
convenient way. IN order to use it:</p>
<ol>
<li>Find edit box in the browser window.</li>
<li>Press NVDA+E.</li>
<li>A new window will appear with the contents of that edit box.</li>
<li>Edit the contents of that edit box in this window.</li>
<li>Once you're done, you can press Escape to close the accessible edit
window and update the edit box on the web page.</li>
<li>Alternatively, you can press Control+Enter, Shift+Enter or
Alt+Enter. This will close the edit window, update the edit box and pass
on the gesture on to the web application.</li>
<li>In order to close the edit window without saving changes, press Alt+F4.</li>
<li>At any time, if the contents of previously edited text is lost, press
NVDA+Control+E to copy it to clipboard.</li>
</ol>
<p>Notes:</p>
<ul>
<li>Do not change the state of the browser, e.g. do not switch tabs and do not
focus other elements within the tab while edit text window is open. Doing
so will prevent BrowserNav from correctly updating text in the edit box.</li>
<li>Make sure to release Control, Shift or Alt modifiers quickly affter
pressing Control+Enter, Shift+Enter, or Alt+Enter. Holding them for over a
second will cause problems.</li>
<li>This feature is currently experimental. Please expect only about 90-95%
success rate.</li>
<li>It has been thoroughly tested with Google Chrome and Firefox. It might
work in other browsers, but there's a higher chance of issues, such as
information loss.</li>
</ul>
Outlook kiegészítőhttp://addons.nvda-project.org/addons/outlookExtended.hu.html2023-05-10T20:38:33Z2019-01-17T04:16:47Z
<ul>
<li>Készítők: Cyrille Bougot, Ralf Kefferpuetz</li>
<li>NVDA compatibility: 2019.3 and beyond</li>
<li><a href="https://www.nvaccess.org/addonStore/legacy?file=outlookextended">stabil verzió</a> letöltése</li>
</ul>
<p>This addon improves the use of Microsoft Outlook by vocalizing some native
commands, adding extra commands and adds extra features.</p>
<h2>Billentyűparancsok:</h2>
<ul>
<li>Alt+számok 0-tól 9-ig az alfanumerikus billentyűzet első sorából, Alt+-,
Alt+=: Az első 12 fejléc bejelentése az üzenetek a naptár és a feladatok
ablakában. Kétszeri lenyomásra a fókuszt a kérdéses mezőre helyezi,
amennyiben az lehetséges. Háromszori lenyomásra a mező tartalmát a
vágólapra helyezi.</li>
<li>NVDA+shift+I (asztali kiosztás) / NVDA+ctrl+shift+I (laptop kiosztás):
információs sáv bejelentése üzenet, naptár és feladatok
ablakában. Kétszeri lenyomásra a fókuszt az információs sávra helyezi,
Háromszori lenyomásra a vágólapra másolja az információs sáv tartalmát.</li>
<li>NVDA+shift+A (asztali) / NVDA+control+shift+A (laptop): Bejelenti a
mellékletek számát és nevét az üzenetablakban. Kétszeri lenyomásra a
mellékletekre helyezi a fókuszt.</li>
<li>NVDA+shift+M (asztali) / NVDA+ctrl+shift+M (laptop): Az üzenettörzsre
helyezi a fókuszt.</li>
<li>NVDA+shift+N (desktop layout) / NVDA+control+shift+N (laptop layout):
Reports the notification in a message window. If pressed twice, moves the
focus to it. If pressed three times, copies its content to the clipboard.</li>
<li>Ctrl+Q: Olvasottnak jelöli a kijelölt üzeneteket az üzenetlistában.</li>
<li>Ctrl+U: Olvasatlannak jelöli a kijelölt üzeneteket az üzenetlistában.</li>
</ul>
<h2>Additional improvements</h2>
<ul>
<li>When the recipient you have entered in the To, Cc or Bcc fields sends
automatic out of office replies or is not present anymore on the Exchange
server, Outlook report it in the notification area. In this notification
area, you also have buttons to remove the address of these recipients.
This add-on will inform you with a ding when this notification area
appear, disappear or be updated. You can then press NVDA+shif+N /
NVDA+control+shift+N once to have it read and twice to jump to this
area. Then move with arrows on the recipient buttons and press a button to
remove the corresponding recipient.</li>
<li>In the address book's result list, you can use horizontal table navigation
commands to read the content of each column.</li>
</ul>
<h2>Megjegyzések</h2>
<p>Minden billentyűparancs megváltoztatható az NVDA beviteli parancsok
ablakában.</p>
<ul>
<li>Az üzenetek olvasott és olvasatlan megjelölése az Outlook angol
verziójának parancsait használja.</li>
<li>A fejlécek bejelentésének alapértelmezett parancsai az alt billentyűből és
az alfanumerikus billentyűzet első sorának karaktereiből állnak. Az
alapértelmezett parancsok az angol billentyűzetkiosztáson alapulnak, így
előfordulhat, hogy magyar kiosztás esetén meg kell változtatni néhány
parancsot, hogy kövesse a logikát.</li>
</ul>
<h2>Változások</h2>
<h3>Version 2.1</h3>
<ul>
<li>Removed the dev channel.</li>
<li>Updated localizations.</li>
</ul>
<h3>Version 2.0</h3>
<ul>
<li>Improve the user experience with notifications appearing when entering
e-mail addresses which are not valid anymore or which send automatic out
of office replies: a sound alerts when such notifications appear or are
updated, a gesture allows to read it or to move to it, and navigation in
this area with arrows is made more easy.</li>
</ul>
<h3>Version 1.10</h3>
<ul>
<li>Compatibility with NVDA 2023.1.</li>
<li>Updated localizations.</li>
</ul>
<h3>Version 1.9</h3>
<ul>
<li>Compatibility with NVDA 2022.1.</li>
<li>Dropped compatibility for versions of NVDA below 2019.3.</li>
<li>The release is now performed thanks to a GitHub action instead of
appVeyor.</li>
<li>Fixed the announcement when the user triple-presses alt+number shortcuts.</li>
<li>Fixed an issue preventing from reading calendar items headers of some
versions of Outlook 365.</li>
<li>Improvement of the test environment of the add-on: navigation in the fake
root dialog.</li>
<li>Updated localizations.</li>
</ul>
<h3>Version 1.8</h3>
<ul>
<li>Updated localizations.</li>
<li>Ensure that all the variable from the original Outlook appModule are still
available.</li>
</ul>
<h3>Version 1.7</h3>
<ul>
<li>Update compatibility for NVDA 2021.1.</li>
<li>Updated localizations.</li>
</ul>
<h3>Version 1.6</h3>
<ul>
<li>Fixed various issues when reading messages headers in Outlook 365.</li>
<li>Fixed an error in announce attachments script when a braille keyboard is
used.</li>
<li>Added a unit test framework.</li>
<li>Updated localizations.</li>
</ul>
<h3>1.5-ös verzió</h3>
<ul>
<li>Az NVDA 2019.3 verziójával már működik az információs sáv olvasása</li>
<li>Az NVDA 2019.3 verzióval már lehetséges táblázatnavigációs parancsokat
használni a Címjegyzékben.</li>
</ul>
<h3>1.4-es verzió</h3>
<ul>
<li>A fejlécekre ugrás szkript ismét működik</li>
<li>A mellékletekre ugrás szkript akkor is működik, ha több melléklet is
tartozik az üzenethez.</li>
<li>Fordításokat adtak hozzá</li>
</ul>
<h3>1.3-as verzió</h3>
<ul>
<li>Javították az üzenetfejlécek olvasását az újabb Microsoft 365 kiadásokban</li>
<li>Frissítés az NVDA újabb kiadásaival való használathoz, Python 2 és Python
3 kompatibilitás</li>
<li>Fordításokat adtak hozzá</li>
<li>A bővítmény kiadásai mostantól az AppVeyor segítségével készülnek</li>
</ul>
<h3>1.2-es verzió</h3>
<ul>
<li>Javították a fejlécek olvasását a találkozók továbbküldésénél</li>
<li>Fordításokat adtak hozzá</li>
</ul>
<h3>1.1-es verzió</h3>
<ul>
<li>Fordításokat adtak hozzá</li>
</ul>
<h3>1.0-s verzió</h3>
<ul>
<li>Első kiadás</li>
</ul>
Training Keyboard commandshttp://addons.nvda-project.org/addons/trainingKeyboardCommands.hu.html2023-05-10T20:38:33Z2019-01-17T04:16:45Z
<ul>
<li>Author: Ibrahim Hamadeh</li>
<li>Download <a>stable version</a></li>
<li>Download <a>development version</a></li>
</ul>
<p>This addon is aimed to train NVDA commands in a game like way, for either
keyboard layout modes desktop or laptop layout.</p>
<p>All commands data is scraped from keyCommands.html file in locale
documentation folder in NVDA.</p>
<p>This addon does not have any default gesture or shortcut.</p>
<p>You have to assign a specific gesture to it via: NVDA menu>preferences>inputGestures>trainingKeyboardCommands.</p>
<h2>Usage</h2>
<ul>
<li>You choose the keyboard layout mode you want to train, and begin play</li>
<li>A question or command and it's description will be displayed, and you have
to pick the right related keys or answer</li>
<li>If you have chose the right answer, your score wi be added one point</li>
<li>If the answer was wrong, the score will not change, and go on with no
loose</li>
<li>At any time, if you want to exit, you will be asked if you want to save
the remaining questions for next round</li>
<li>If in a later time you choose a layout wit saved questions, you will be
asked if you want to resume the remaining questions from previous round</li>
<li>Answering all questions, about 110 for each layout, you will be declared a
winner deserving NVDA addon's cup.</li>
</ul>
<p>https://www.nvaccess.org/addonStore/legacy?file=trainingKeyboardCommands</p>
<p>https://www.nvaccess.org/addonStore/legacy?file=trainingKeyboardCommands</p>
Columns Reviewhttp://addons.nvda-project.org/addons/columnsReview.hu.html2024-02-13T14:38:26Z2018-11-27T20:34:27Z
<ul>
<li>Author: Alberto Buffolino, Łukasz Golonka, other contributors</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=columnsReview">stable version</a></li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=columnsReview-dev">development version</a></li>
<li>NVDA compatibility: 2017.3 and beyond</li>
</ul>
<p>Columns Review is an add-on to enhance NVDA experience with lists.</p>
<p>Its features include:</p>
<ul>
<li>customizable actions on column header and/or content (available actions
are read, copy, spell and show in browse mode);</li>
<li>ability to cycle between columns in ten-by-ten intervals;</li>
<li>simplified header management (mouse clicks);</li>
<li>on-demand reading of relative current item position (i.e.: item 7 of 10);</li>
<li>customizable gestures with or without numpad;</li>
<li>"0 items" announcement when list is empty (not working in Win8/10 folders,
unfortunately);</li>
<li>say all support;</li>
<li>report of selected items (amount and item names);</li>
<li>list search (with item multiselection, if checked/supported).</li>
</ul>
<h2>Gestures</h2>
<p>Default keys for columns, headers and position are NVDA+control, but you can
customize them from add-on settings (not "Input gestures" dialog!).</p>
<p>Note that your keyboard could have problems processing some key
combinations, so try all add-on gestures and adjust them for better results.</p>
<p>See also add-on preferences for numpad mode, keyboard layout (without
numpad), and the four available actions for columns.</p>
<ul>
<li>NVDA+control+digits from 1 to 0 (keyboard mode) or from 1 to 9 (numpad
mode): by default, read the chosen column if pressed once, copy it if
pressed twice;</li>
<li>NVDA+control+numpadMinus (numpad mode): like NVDA+control+0 in keyboard
mode, read or copy the 10th, 20th, etc column;</li>
<li>NVDA+control+- (keyboard mode, EN-US layout): in a list with 10+ columns,
change interval and process columns from 11 to 20, from 21 to 30, and so
on (change last char according to your layout, from settings);</li>
<li>NVDA+control+numpadPlus (numpad mode): like previous command;</li>
<li>NVDA+control+enter (numpadEnter in numpad mode): open header manager;</li>
<li>NVDA+control+delete (numpadDelete in numpad mode): read relative current
item position (i.e.: item 7 of 10);</li>
<li>Arrows and NVDA+tab (in empty list): repeat "0 items" message;</li>
<li>NVDA+downArrow (desktop layout) or NVDA+a (laptop layout): start say all
(this gesture depends on original one under "Input gestures"/"System
caret");</li>
<li>NVDA+shift+upArrow (desktop layout) or NVDA+shift+s (laptop layout):
report amount and names of current selected list items (like previous
command for customization);</li>
<li>NVDA+control+f: open find dialog (not customizable);</li>
<li>NVDA+f3: find next occurrence of previously entered text (not
customizable);</li>
<li>NVDA+shift+f3: find previous occurrence (not customizable).</li>
</ul>
<h2>Support</h2>
<p>This add-on provide a general support for more common lists (see below), and
some specific applications. Main author (Alberto Buffolino) cannot guarantee
compatibility/functionality for those applications he not uses, like Outlook
and Windows Mail, but he'll be happy to collaborate with their users or
accept a pull request for them.</p>
<p>Lists supported are:</p>
<ul>
<li>SysListView32;</li>
<li>DirectUIHWND (present in 64-bit systems);</li>
<li>WindowsForms10.SysListView32.* (applications that use .NET);</li>
<li>multi-column treeview like as that presents in RSSOwlnix;</li>
<li>Mozilla table (tipically, Thunderbird message list, thread-grouping
supported).</li>
</ul>
TextNavhttp://addons.nvda-project.org/addons/textnav.hu.html2023-05-10T20:38:33Z2018-11-10T06:10:40Z
<ul>
<li>Author: Tony Malykh</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=textnav">stable version</a></li>
</ul>
<p>TextNav allows you to find text that you want to read on a web page in just
a single keystroke. More precisely, it adds a keystroke to jump to next or
previous text paragraphs - that is a paragraph containing one or more
sentences. This feature might be useful to quickly find the textual part of
a web page or to skip over menus, advertisements and other not important
page elements.</p>
<h2>Keystrokes:</h2>
<ul>
<li>Alt+Shift+Down arrow: Go to next text paragraph.</li>
<li>Alt+Shift+Up arrow: Go to previous text paragraph.</li>
</ul>
HangzóGrafikonhttp://addons.nvda-project.org/addons/AudioChart.hu.html2024-02-13T14:37:42Z2018-11-10T06:10:39Z
<ul>
<li>Fejlesztő: Tony Malykh</li>
<li><a href="https://www.nvaccess.org/addonStore/legacy?file=audiochart">stabil verzió</a> letöltése</li>
</ul>
<p>A bővítmény lehetővé teszi a Microsoft Excelben létrehozott idősorok
hangjelzéssel történő áttekintését.</p>
<h2>Használat</h2>
<p>Jelöljön ki egy cellát, vagy oszlopot, ami idősort tartalmaz.</p>
<h2>Billentyűparancsok:</h2>
<ul>
<li>NVDA+A: AudióGrafikon lejátszása</li>
<li>NVDA+A gyors kétszeri lenyomás: Kalibrációs párbeszédablak
megjelenítése. laptop kiosztás esetén: NVDA+Ctrl+Shift+A</li>
</ul>
<h2>Forráskód</h2>
<p> https://github.com/mltony/nvda-audio-chart/</p>
BluetoothAudiohttp://addons.nvda-project.org/addons/BluetoothAudio.hu.html2023-05-10T21:28:25Z2018-11-10T06:10:39Z
<ul>
<li>Fejlesztő: Tony Malykh</li>
<li><a href="https://www.nvaccess.org/addonStore/legacy?file=bluetoothaudio">stabil verzió</a> letöltése</li>
</ul>
<p>A Bluetooth Audio bővítmény segít javítani a hangminőséget Bluetooth
fülhallgatók és hangszórók használata esetén.</p>
<p>A legtöbb bluetooth eszköz pár másodperc után készenléti módba kapcsol. Ha
ekkor az NVDA beszélni kezd, az első szó egy része elveszik. Épp ezért a
bővítmény egy az emberi fülnek nem érzékelhető hangot játszik le
folyamatosan, megakadályozva a készenléti mód bekapcsolását.</p>
<p>Figyelmeztetés: A Bluetooth Audio használata csökkentheti a Bluetooth-eszköz
akkumulátorának készenléti idejét.</p>
Calibrehttp://addons.nvda-project.org/addons/calibre.hu.html2023-05-10T20:38:33Z2018-11-01T12:46:05Z
<ul>
<li>Készítő: Javi Dominguez</li>
<li><a href="https://www.nvaccess.org/addonStore/legacy?file=cae">stabil verzió letöltése</a></li>
<li><a href="https://www.nvaccess.org/addonStore/legacy?file=cae-dev">Fejlesztői verzió letöltése</a></li>
</ul>
<p>Ez a kiegészítő a Calibre nevű ebook kezelő program használatát könnyíti meg.</p>
<ul>
<li>F10: Az eszköztárra viszi a fókuszt. Az egyes opciók eléréséhez a szokásos navigációs billentyűk használhatók. (tab és nyílbillentyűk); enter: Az elemek aktiválása; menü gomb: a legördülő menük előhívása; ESC: az eszköztár bezárása.</li>
<li>F12: Az aktuális könyv keresése a Google-on</li>
<li>NVDA+Alt+End: az Összes könyv és a kijelölt könyvek száma a könyvek listáján.</li>
<li>NVDA+Control+H: Megnyitja az aktuális oszlop beállítására szolgáló helyi menüt.</li>
<li>I a könyvek listáján: Információk a könyvről</li>
</ul>
<p>A billentyűparancsok személyre szabhatók az NVDA Beviteli parancsok párbeszédablakán, a Calibre kategóriában, olyankor,amikor a Calibre meg van nyitva. A beállítások közt megadható, hogy az NVDA hogyan olvassa a táblázat fejléceit: Sorok és oszlopok, Csak oszlopok és Nincs opciók közül lehet választani.</p>
<p>További billentyűparancsokért keresse a <a href="https://manual.calibre-ebook.com/gui.html">Calibre dokumentációját</a>.</p>
<p>A GNU általános nyilvános licenc hatálya alá tartozik. További részletekért lásd a <a href="https://github.com/javidominguez/Calibre/blob/master/COPYING.txt">COPYING.txt</a> fájlt.</p>
Eszköztár Felfedezőhttp://addons.nvda-project.org/addons/toolbarsExplorer.hu.html2023-08-14T13:52:28Z2018-08-23T19:59:29Z
<ul>
<li>Készítő: Alberto Buffolino</li>
<li><a href="https://www.nvaccess.org/addonStore/legacy?file=toolbarsExplorer">Stabil verzió</a> letöltése</li>
<li><a href="https://www.nvaccess.org/addonStore/legacy?file=toolbarsExplorer-dev">Fejlesztői verzió</a> letöltése</li>
</ul>
<p>Ez a kiegészítő megkönnyíti bizonyos programok eszköztárainak
elérését. Elemnavigáción alapul, csak leegyszerűsített parancsokkal.</p>
<h2>Billentyűparancsok</h2>
<ul>
<li>Alt+menügomb: Az eszköztár felfedezésének elindítása<br />
A parancsot bármikor megváltoztathatja az NVDA beviteli parancsok között az elemnavigáció kategóriában.</li>
</ul>
<p>Az eszköztár felfedezése közben az alábbi parancsok használhatók:</p>
<ul>
<li>Balnyíl és jobbnyíl: az előző és a következő eszköztárra lép.</li>
<li>Felnyíl és lenyíl: Lépked az aktuális eszköztár elemein.</li>
<li>Enter: aktiválja az eszköztárat vagy annak egy elemét.</li>
<li>Szóköz: Bal egérgomb lenyomásának emulálása az eszköztáron vagy annak egy
elemén.</li>
<li>menügomb vagy Shift+F10: jobb egérgomb lenyomásának emulálása az
eszköztáron vagy annak egy elemén.</li>
<li>Esc: kilép az eszköztár felfedezéséből</li>
</ul>
<p>Ezen kívül az eszköztáron használhatja az NVDA által biztosított
elemnavigációs parancsokat is.</p>
<h2>Megjegyzések</h2>
<p>Az eszköztár felfedezése az Esc gomb lenyomásával véget ér, de akkor is
ha...</p>
<ul>
<li>az eszköztáron műveletet hajt végre a szóköz a menügomb vagy az enter
segítségével;</li>
<li>olyan parancs használatakor, ami elveszi a fókuszt az eszköztárról
például: Windows, Alt, Tab billentyű, NVDA+F1 parancs vagy az
elemnavigációs parancsok, stb.</li>
</ul>
<p>A Windows gombot, az Alt és az Esc billentyűket nem tartalmazó parancsok
hatására ilyenkor nem történik semmi. (pl.: Shift+H, Ctrl+Z).</p>
<h2>Javaslatok:</h2>
<ul>
<li>Mozilla alkalmazásokban közvetlenül a telepítés vagy frissítés után
előfordulhat, hogy nem működik megfelelően. Az NVDA és a kérdéses Mozilla
alkalmazás újraindítása megoldja a problémát.</li>
<li>Libre Office esetén az eszköztárat alapértelmezett vagy egyszerű nézetben
lehet megfelelően használni a bővítménnyel. Az eszköztár nézetét a Libre
Office alkalmazások Nézet menüjében lehet beállítani.</li>
</ul>
Input Lockhttp://addons.nvda-project.org/addons/inputLock.hu.html2023-05-10T20:38:33Z2018-08-16T16:47:17Z
<ul>
<li>Author: Jose Manuel Delicado</li>
<li>NVDA compatibility: 2022.4 and beyond</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=inputLock">stable version</a></li>
</ul>
<h2>Introduction</h2>
<p>Do you have kids or pets at home? Do you have a cat and It likes very much
climbing your table and walking over your keyboard? Do you accidentally move
the mouse to random parts in the screen while using your laptop? Then Input
Lock is for you! You will be able to leave your computer alone and turned on
without risk.</p>
<p>Once installed, you will be able to lock your keyboard, touch screen, if
your laptop has one, mouse and Braille display.</p>
<h2>Usage</h2>
<p>This addon adds two extra gestures to NVDA. By default they are unassigned,
so you will have to configure them from Input gestures dialog. Read the NVDA
User Guide for more information.</p>
<p>When you press the toggle input lock gesture, NVDA will say "Input
locked". Your input devices will be blocked until you press the same gesture
again. In that moment, NVDA will say "Input unlocked" and everything will
work as usual.</p>
<p>If you press the toggle mouse block gesture, your mouse will be
locked. Press this command again to unlock it. While mouse is locked, you
can use NVDA gestures to move it, and click with left and right buttons, but
You can't move the mouse itself. Mouse clicks can also be disabled from
Input lock category in NVDA settings dialog (NVDA 2018.2 and later) or from
add-on settings dialog for older versions, available under preferences
menu. In addition, from these settings you can control wether mouse locks
when NVDA is started or not.</p>
<p>Note: when mouse clicks are blocked, you can't use any NVDA gestures to work
with the mouse.</p>
<h2>Limitations and known problems</h2>
<p>Input Lock has the following known problems:</p>
<ul>
<li>The shortcuts control+alt+del and windows+l can be used even when the
keyboard is locked.</li>
<li>On some laptops, the touchpad still accepts user input after mouse is
blocked.</li>
</ul>
<h2>Changelog</h2>
<h3>Version 1.11</h3>
<ul>
<li>Updated compatibility flags for recent NVDA versions.</li>
<li>Updated translations.</li>
<li>Now, minimum supported version is 2022.4.</li>
</ul>
<h3>Version 1.10</h3>
<ul>
<li>Updated compatibility flags for recent NVDA versions.</li>
<li>Updated translations.</li>
<li>Updated documentation.</li>
<li>Now, minimum supported version is 2021.3.</li>
<li>The input will remain blocked after waking up from standby mode. Thanks to
Javi Dominguez.</li>
</ul>
<h3>Version 1.9</h3>
<ul>
<li>Updated compatibility flags for recent NVDA versions.</li>
<li>Updated translations.</li>
<li>Updated documentation.</li>
</ul>
<h3>Version 1.8</h3>
<ul>
<li>Updated compatibility flags for recent NVDA versions.</li>
<li>Updated translations.</li>
</ul>
<h3>Version 1.7</h3>
<ul>
<li>Updated compatibility flags for recent NVDA versions.</li>
<li>Updated translations.</li>
</ul>
<h3>Version 1.6</h3>
<ul>
<li>Now, settings are removed only when the add-on is
uninstalled. Configuration is nolonger reset when upgrading.</li>
<li>New and updated translations.</li>
</ul>
<h3>Version 1.5</h3>
<ul>
<li>Added compatibility with recent NVDA releases.</li>
<li>New translations.</li>
</ul>
<h3>Version 1.4</h3>
<ul>
<li>The addon gestures are unassigned by default.</li>
</ul>
<h3>Version 1.3</h3>
<ul>
<li>Added a configuration panel in settings dialog. For old NVDA versions, a
menu item and a dialog have been added too.</li>
<li>Added a setting to lock the mouse when NVDA is started.</li>
<li>Added a setting to block also mouse clicks while mouse is locked.</li>
<li>Small bugs fixed, some code optimizations and less duplicated strings for
translators</li>
</ul>
<h3>Version 1.2</h3>
<ul>
<li>Now the mouse can also be locked</li>
<li>New command to lock and unlock only the mouse</li>
</ul>
<h3>Version 1.1</h3>
<ul>
<li>If another addon has previously added a capture function to inputManager,
it is restored when the input is unlocked.</li>
</ul>
<h3>Version 1.0</h3>
<ul>
<li>Initial release</li>
</ul>
Bővítmény-frissítőhttp://addons.nvda-project.org/addons/addonUpdater.hu.html2023-10-01T03:03:50Z2018-07-29T18:33:01Z
<ul>
<li>Author: Joseph Lee, Luke Davis</li>
<li>Letöltés <a href="https://www.nvaccess.org/addonStore/legacy?file=addonUpdater">stabil verzió</a></li>
<li>NVDA compatibility: 2023.1</li>
<li>This is a would-be legacy add-on: NVDA 2023.2 includes add-on update check
functionality through add-on store</li>
</ul>
<p>Ez a kiegészítő életre hívja a 3208-as számú hibajegyet, vagyis lehetőséget
biztosít a feltelepített bővítmények frissítéseinek letöltésére és
telepítésére.</p>
<p>To check for updates after installing this add-on, go to NVDA
menu/Tools/Check for add-on updates (if NVDA did notice updates, the menu
item will say "Review add-on updates" followed by update count). If updates
are available, a list of add-on updates will be shown, with each entry
consisting of add-on name, current version, new version, and update
channel. Select Update, and NVDA will download and apply updates in
sequence, with a prompt to restart your NVDA shown afterwards.</p>
<p>A következő bővítmények saját frissítési szolgáltatást tartalmaznak, ezért
ezeket ez a bővítmény nem kezeli:</p>
<ul>
<li>Braille Kiegészítő</li>
<li>Tienda NVDA (Spanish NVDA Community Store)</li>
</ul>
<p>Fontos megjegyzések:</p>
<ul>
<li>This is a proof of concept add-on. Once the <a href="https://github.com/nvaccess/nvda/issues/3208">relevant feature is included
in NVDA</a> in the form of <a href="https://github.com/nvaccess/nvda/pull/13985">an add-on store</a> (introduced in NVDA
2023.2), this add-on will be discontinued.</li>
<li>This add-on requires Windows 10 Version 22H2 or later.</li>
<li>This add-on is not intended to be used in secure screens. If you have
add-ons installed in the secure screen, even if you copy Add-on Updater to
secure screen mode, Add-on Updater will not work.</li>
<li>Amennyiben egy bővítmény a frissítése után már nem lenne kompatibilis a
használt NVDA verzióval, a frissítés nem történik meg.</li>
<li>Not all add-ons come with development releases. If you are not getting
updates after choosing to install development versions of an add-on,
switch to stable channel for affected add-ons.</li>
<li>On some systems (particularly computers joined to a corporate domain),
add-on update check functionality may not work properly, therefore add-on
updates must be downloaded manually.</li>
<li>Some features require NVDA to be installed on the computer.</li>
<li>Some add-on releases include SHA256 hash values for checking add-on
package integrity (all add-ons published on add-on store include SHA256
values), and if the hash value does not match, add-on updating will fail.</li>
</ul>
<h2>Add-on settings</h2>
<p>You can configure Add-on Updater settings from NVDA Settings screen (NVDA
menu, Preferences, Settings) under Add-on Updater category. Add-on settings
are as follows:</p>
<ul>
<li>Automatically check for add-on updates: if checked, NVDA will check for
add-on updates once a day. Automatic update checks is enabled on Windows
client systems and disabled on server systems.</li>
<li>Add-on update notification: you can choose to receive update notification
as a dialog or a toast. On server systems or running a portable copy of
NVDA, update notification will be shown as a dialog.</li>
<li>Update add-ons in the background (update notification is set to toast): if
checked, Add-on Updater will apply updates in the background. A toast will
appear informing you that add-on updates are being downloaded and
installed, followed by another message announcing update results. Same
limitations as add-on update notification setting and toast must be
selected from the above option in order for background updates to work.</li>
<li>Do not update add-ons: you can choose add-ons that should not be updated.</li>
<li>Prefer development releases: any add-ons checked in this list will receive
development (prerelease) releases.</li>
<li>Development release channel (selected add-on must be checked from prefer
development releases): allows selecting development updates coming from
either dev or beta channel.</li>
<li>Add-on update source: you can choose where to get updates from. Currently
Add-on Updater supports downloading updates from the sources listed
below. A confirmation message will be shown after changing update source.</li>
</ul>
<p>The available add-on update sources are:</p>
<ul>
<li>NV Access add-on store (default)</li>
<li>Community add-ons website</li>
<li>Spanish community add-ons catalog</li>
<li>Catalogs maintained by NVDA communities in China and Taiwan</li>
</ul>
<h2>Version 23.10</h2>
<ul>
<li>Changed update notification message to mention NV Access add-on store if
running NVDA 2023.2 or later and add-on update source is set to add-on
store.</li>
</ul>
<h2>Version 23.09</h2>
<ul>
<li>Windows 10 Version 22H2 or later is required.</li>
</ul>
<h2>Version 23.08</h2>
<p>This is the final version to support Windows 7, 8, 8.1, and 10 21H2 and
earlier.</p>
<ul>
<li>Add-on update results dialog or toast message will be shown once add-on
store message is closed.</li>
<li>If add-on updates dialog is shown and then closed without installing
add-ons, NVDA will no longer report no add-on updates when add-on updates
are checked.</li>
<li>Add-on Updater will no longer present startup messages and perform update
checks if updating a portable copy of NVDA.</li>
</ul>
<h2>Version 23.07</h2>
<ul>
<li>If using an NVDA release with add-on store included, a startup message
will be shown informing users about the new add-on store. If this happens,
add-on update results dialog will not be shown. Add-on Updater will
continue to work.</li>
<li>Improved performance when checking for add-on updates from NV Access
add-on store and community add-ons website update sources, particularly
when no add-on updates are available.</li>
</ul>
<h2>Version 23.06</h2>
<ul>
<li>NVDA 2023.1 or later is required.</li>
<li>Changed default add-on update source from community add-ons website to NV
Access add-on store.</li>
</ul>
<h2>Version 23.05</h2>
<ul>
<li>Add-on update channel will be displayed when reviewing available add-on
updates.</li>
<li>NVDA will present a message about add-on store if using NVDA releases with
add-on store included.</li>
</ul>
<h2>Version 23.04</h2>
<ul>
<li>Added development update channel setting to let users of development
add-ons choose between dev and beta update channels. This option is shown
if the selected add-on from prefer development releases list is checked.</li>
<li>NV Access add-on store is broadly available as an update source from
Add-on Updater.</li>
</ul>
<h2>Version 23.03</h2>
<ul>
<li>Due to changes made to the website used by some update sources, this must
be installed manually.</li>
<li>Added NV Access add-on store as an experimental add-on update source.</li>
</ul>
<h2>Version 23.02</h2>
<ul>
<li>NVDA 2022.4 or later is required.</li>
<li>NVDA will no longer offer what appears to be older add-on updates for most
add-ons after checking for add-on updates. This applies to add-ons with
version text of the form number.number.</li>
</ul>
<h2>Version 23.01</h2>
<ul>
<li>NVDA will check minimum Windows version for add-on updates if update
source is set to NVDA community add-ons website.</li>
<li>Improved performance when downloading many ad-on updates at once. As a
result, the order of add-on downloads shown in download progress dialog
will be random.</li>
<li>Parts of the add-on now use Python's concurrent.futures module to improve
performance, specifically update check and download processes.</li>
</ul>
<h2>Version 22.11</h2>
<ul>
<li>NVDA 2022.3 or later is required.</li>
</ul>
<h2>Version 22.10</h2>
<ul>
<li>Added catalogs from NVDA communities in China and Taiwan as add-on update
sources (by Woody Tseng).</li>
</ul>
<h2>Version 22.09</h2>
<ul>
<li>NVDA 2022.2 or later is required.</li>
<li>NVDA will check SHA256 hash values while downloading add-on updates if the
add-on update source includes hash values for add-on packages. If hash
value is invalid, add-on updating will fail.</li>
</ul>
<h2>Version 22.08</h2>
<ul>
<li>Significant internal code reorganization and rewrites.</li>
<li>On Windows Server systems, automatic add-on update check feature is
disabled by default (affects new installations).</li>
<li>Added ability to select different add-on update sources. Add-on Updater
can check for updates hosted on community add-ons website
(addons.nvda-project.org) or Spanish community add-ons catalog
(nvda.es). A new combo box was added in add-on settings panel to select
add-on update source.</li>
<li>On Windows 10 and later, it is possible to let Add-on Updater check for,
download, and install add-on updates in the background provided that NVDA
is actually installed and ad-on update notification is set to toast.</li>
<li>Redesigned add-on update download and install experience for multiple
add-on updates, including use of a single dialog to show download progress
for all add-ons and updating add-ons after downloading all of them.</li>
<li>If NVDA is set to announce update notifications as toasts, "check for
add-on updates" menu item will become "review add-on updates" when updates
become available, with the new name including add-on update count.</li>
<li>In NVDA 2022.1 and later, Add-on Updater can process command-line switches
for this add-on (currently none).</li>
<li>In add-on updates dialog, add-ons disabled by the user are unchecked by
default, and a confirmation message will be shown checking disabled
add-ons and attempting to update them as doing so will enable them.</li>
</ul>
<h2>Version 22.07</h2>
<ul>
<li>URL's used by the add-on are now constants hosted inside a new module
(contributed by Luke Davis).</li>
<li>Add-on download progress dialog is now centered on screen.</li>
</ul>
<h2>Version 22.03</h2>
<ul>
<li>Improved security by not loading the add-on when NVDA is running in secure
mode.</li>
</ul>
<h2>Version 22.02</h2>
<ul>
<li>NVDA 2021.3 or later is required.</li>
<li>On Windows 10, add-on update toast notifications are localized.</li>
</ul>
<h2>Version 22.01</h2>
<ul>
<li>NVDA 2021.2 or later is required.</li>
<li>On server systems running Windows Server 2016 and later, add-on updates
will be presented in a dialog instead of using toast notifications.</li>
</ul>
<h2>Version 21.10</h2>
<ul>
<li>It is again possible to check for add-on updates on some systems, notably
after a clean Windows installation.</li>
</ul>
<h2>Version 21.09</h2>
<ul>
<li>NVDA 2021.1 or later is required.</li>
<li>on Windows 10 and later, it is possible to select add-on update
notification between a toast message and an update dialog. This can be
configured from Add-on Updater settings found in NVDA Settings screen.</li>
<li>Add-on Updater will no longer check minimum Windows release information
for add-ons as add-ons such as Windows App Essentials provide better
Windows compatibility information.</li>
</ul>
<h2>Version 21.07</h2>
<ul>
<li>On Windows 10 and later, a toast notification will be shown when add-on
updates are available. Note that you cannot click this notification - you
must open NVDA menu/Tools/Check for add-on updates to review updates.</li>
<li>When legacy add-ons dialog is shown at startup, you can now review legacy
add-ons and reasons just like add-on updates.</li>
<li>Improved add-on update check internals, including use of add-on metadata
collection provided by the community to validate add-on
compatibility. Among other things, this eliminates add-on releases for
adding update checks for new add-ons.</li>
</ul>
<h2>Version 21.05</h2>
<ul>
<li>NVDA will no longer play error tones if trying to check updates while
using NVDA 2021.1 alpha snapshots, caused by changes to wxPython GUI
toolkit.</li>
</ul>
<h2>Version 21.03</h2>
<ul>
<li>NVDA 2020.4 or later is required.</li>
<li>NVDA will present an error dialog if errors occur while checking for
add-on updates such as loss of Internet connection.</li>
</ul>
<h2>Version 20.11</h2>
<ul>
<li>NVDA 2020.3 or later is required.</li>
<li>Resolved more coding style issues and potential bugs with Flake8.</li>
<li>NVDA will no longer play error tones or appear to do nothing when using
the add-on while NVDA is running from source code. A message about this
fact will be recorded in the log instead.</li>
</ul>
<h2>20.07-es verzió</h2>
<ul>
<li>NVDA 2020.1 vagy újab verzió szükséges</li>
<li>Amennyiben olyan bővítmények vannak telepítve a rendszerben, amelyek olyan
opciókat adtak az NVDA-hoz, amik időközben már bekerültek az NVDA fő
programjába, a Bővítmény-frissítő figyelmeztet, és felajánlja a kérdéses
bővítmények eltávolítását.</li>
<li>Most már elmentheti, betöltheti és visszaállíthatja a bővítmény-frissítő
beállításait. billentyűparancsok: Ctrl+NVDA+C, Ctrl+NVDA+R 1x és 3x gyors
egymásutáni lenyomás</li>
</ul>
<h2>20.06-os verzió</h2>
<ul>
<li>Javítottak több kódolási hibát és lehetséges bugot.</li>
</ul>
<h2>20.04-es verzió</h2>
<ul>
<li>Az NVDA már nem ad ki hibajelző hangot, ha a Bővítmény-frissítő
segítségével akarunk bővítmény-frissítéseket keresni.</li>
<li>Javították azt a hibát, hogy a bővítmények frissítése nem volt elérhető az
NVDA Eszközök menüjéből.</li>
</ul>
<h2>20.03-as verzió</h2>
<ul>
<li>NVDA 2019.3 vagy újab verzió szükséges</li>
<li>Bővítmények frissítésének telepítésekor már nem a Bővítmény-frissítő,
hanem maga az NVDA ellenőrzi, hogy a kérdéses bővítmény kompatibilis-e a
futó verzióval.</li>
</ul>
<h2>19.11-es verzió</h2>
<ul>
<li>Ha elérhetők bővítmény frissítések, az NVDA már bejelenti, hogy hány
bővítményt lehet frissíteni.</li>
</ul>
<h2>19.09-es verzió</h2>
<ul>
<li>NVDA 2019.2 vagy újab verzióra van szükség</li>
<li>Már nem lép fel időtúllépési hiba a GitHubról frissíthető bővítmények
frissítései során.</li>
</ul>
<h2>19.04-es verzió</h2>
<ul>
<li>NVDA 2019.1 vagy újab verzióra van szükség</li>
<li>A kiegészítők frissítésekor ellenőrzésre kerülnek a minimálisan szükséges
ill. a legutóbb tesztelt verzió paraméterek.</li>
</ul>
<h2>19.01-es verzió</h2>
<ul>
<li>NVDA 2018.4 vagy újab verzióra van szükség</li>
<li>Javított válaszkészség a kiegészítő frissítések ellenőrzése során.</li>
<li>Javították a kiegészítő Python 3 kompatibilitását.</li>
</ul>
<h2>18.12.2-es verzió</h2>
<ul>
<li>Python 3 támogatása</li>
<li>Kompatibilitási hiba javítva a jelenlegi NVDA alpha snapshot verziók
esetén, ahol a kiegészítő frissítései nem kerülnek letöltésre.</li>
</ul>
<h2>18.12.1-es verzió</h2>
<ul>
<li>Fordítások hozzáadva</li>
</ul>
<h2>18.12-es verzió</h2>
<ul>
<li>A letiltott bővítmények frissítéseit is ellenőrzik, de a frissítést
követően a bővítmény továbbra is le lesz tiltva.</li>
<li>A frissítések során, ha egy bővítmény speciális NVDA-verziót és / vagy
Windows-kiadást igényel, ezek ellenőrzése megtörténik, és ha ezek közül az
egyik nem egyezik, hibaüzenet jelenik meg, és a frissítés megszakad.</li>
<li>Ha az automatikus frissítés ellenőrzése engedélyezve van, és a frissítések
elérhetőek, egy listában jelennek meg. Az NVDA mostantól nem kérdez rá a
frissítések áttekintésére.</li>
</ul>
<h2>18.10-es verzió</h2>
<ul>
<li>Első verzió (tesztelés alatt jelöléssel)</li>
</ul>
Access8Mathhttp://addons.nvda-project.org/addons/access8math.hu.html2024-02-13T14:36:50Z2018-06-24T21:04:39Z
<ul>
<li>Authors: Woody Tseng</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=access8math">stable version</a></li>
</ul>
<h1>Access8Math feature</h1>
<p>This NVDA addon enhances the mathematical content reading and writing
experience.</p>
<p>The reading feature includes improved language translation in the ability to
segment long math content into smaller parts using interactive navigation.</p>
<p>The writing feature includes a command menu for easier
LaTeX/AsciiMath/Nemeth input and the ability to export to a visually
readable HTML document for better collaboration.</p>
<h2>reading feature</h2>
<ul>
<li>Reads entire lines including text and mathematical content</li>
<li>Provides interactive navigation to move, read, and zoom in or out on
mathematical content snippets</li>
<li>Allows for reviewing text while interactive navigation</li>
<li>Uses simplified speech rules</li>
<li>Breaks speech between items in mathematical content</li>
</ul>
<h2>writing feature</h2>
<ul>
<li>Allows writing of mathematical content using LaTeX/AsciiMath/Nemeth</li>
<li>Provides a command menu for inputting LaTeX</li>
<li>Offers shortcut gestures for inputting LaTeX</li>
<li>Allows for more efficient cursor movement during editing</li>
<li>Allows reads documents containing LaTeX/AsciiMath/Nemeth data in real-time
while editing the document</li>
<li>Provides converting text files into HTML files for preview and export.</li>
</ul>
<h1>Access8Math feature</h1>
<p>This NVDA add-on enhances speech and braille output for mathematical
content. Although the NVDA already integrating MathPlayer, certain aspects
require improvement, such as the lack or incompleteness of language-specific
translation, language-specific interactive navigation.</p>
<p>Interactive navigation dissects mathematical content into smaller portions
for speech or braille output, allowing for the selection of the desired
fragment and mode of delivery through keyboard commands. This enhances one's
understanding of the structure and elements of lengthy mathematical content,
and the hierarchical relationships between items.</p>
<p>Additionally, this NVDA add-on enables the writing of mathematical
content. Using the command menu, input can be executed without having to
memorize LaTeX codes. Upon completion, the document can be transformed into
a visually comprehensible HTML document via the view and export function,
thereby enabling seamless collaboration and discourse with others.</p>
<h2>Reading feature</h2>
<p>Access8Math is able to read MathML content in web browsers such as Mozilla
Firefox, Google Chrome, and Microsoft Edge, as well as MathType content in
Microsoft Word.</p>
<p>By pressing the space bar or enter key on a MathML math object, you can
enter navigation mode and interact with the content by moving, and zooming
in or out on reading snippets.</p>
<ul>
<li>Analyze the overall mathematical meaning of the content: analyze the
structure of MathML, and when it meets a specific rule, read it aloud in
the mathematical meaning of the rule</li>
<li>Analyze the mathematical meaning of the content item: When navigating and
browsing, it will prompt the meaning of the content under its upper
content. For example, there are two score items, and moving between them
will enroll the item as the denominator or numerator</li>
</ul>
<h3>navigation interactive mode command:</h3>
<p>The following commands are available in navigation interactive mode:</p>
<ul>
<li>"Down Arrow": shrink the reading snippet(zoom in)</li>
<li>"Up Arrow": enlarge the reading snippet(zoom out)</li>
<li>"Left Arrow": Moves to the previous math content.</li>
<li>"Right Arrow": Moves to the next math content.</li>
<li>"home": Moves back to the top of the entire math content.</li>
<li>"ctrl+C": Copies the MathML source code of the object.</li>
<li>"numpad 1~9": Reads the math content as serialized text using NVDA
Reviewing Text.</li>
<li>"ESC": Exits the navigation mode.</li>
</ul>
<h2>Writing feature</h2>
<p>Comprehensive content: Incorporating Both Text and Mathematical Content</p>
<p>For Windows 11, the Access8Math editor must be used, while for Windows 10 or
earlier versions, either Access8Math editor or Notepad can be used. It is
recommended to use the built-in Access8Math editor for writing comprehensive
content.</p>
<p>To distinguish between text content and mathematical content, you can use
delimiters to enclose the mathematical notation area. This means that any
data within the mathematical notation area will be considered mathematical
content according to the specified delimiter, while data outside of the
mathematical notation area will be treated as text content.</p>
<p>| category | start delimiter | end delimiter | | --- | --- | --- | |
LaTeX(bracket) | ( | ) | | LaTeX(money) | $ | $ | | AsciiMath | <code>|</code> | |
Nemeth(UEB) | <em>% | </em>: | | Nemeth(at) | @ | @ |</p>
<p>You can choose what delimiter use for LaTeX/Nemeth in the writing setting.</p>
<h3>Command gesture (toggle: NVDA+alt+c)</h3>
<p>alt+m: The mark command window pops up, select LaTeX/AsciiMath/Nemeth and
press enter to add LaTeX/AsciiMath marks before and after the currently
selected text (the current cursor when no text is selected) and
automatically move the cursor into it. Enter content quickly.</p>
<p>alt+l: Pop up the LaTeX command window, select the LaTeX command item to be
added and press the enter key to add the corresponding LaTeX syntax at the
current cursor and automatically move the cursor to the appropriate input
point for quick input.</p>
<p>LaTeX command window</p>
<ul>
<li>Move to any LaTeX command item and press English letters (a~z) or f1~f12
to set shortcuts</li>
<li>Move any LaTeX command item and press delete/back space to remove the
shortcut that has been set</li>
<li>Move to any LaTeX command item and press enter to add the corresponding
LaTeX syntax at the current cursor</li>
</ul>
<p>alt+i: When the cursor stops on the math block, you can interact with the
math block for navigation</p>
<p>alt+h: HTML documents that can convert text data and mathematical data can
be viewed or exported. The content of the math block is converted into
MathML and presented side by side with the text to facilitate visual
reading.</p>
<ul>
<li>View: Open the converted HTML document through the default .HTML extension
application set by the system.</li>
<li>Export: Pack the converted HTML file and the original text file into a
compressed file.</li>
</ul>
<p>alt+t: The data of the block where the cursor is located can be converted
between LaTeX and AsciiMath (the cursor needs to be in the LaTeX or
AsciiMath block)</p>
<p>In the writing settings, you can choose whether to enable command gestures
at startup. Press NVDA+alt+c in the editing area to enable or disable
command gestures, which can be changed in input gestures.</p>
<h3>Writing block navigation gestures (toggle: NVDA+alt+n)</h3>
<ul>
<li>alt+Left arrow key: move to the start point of the previous data block</li>
<li>alt+Down arrow key: Only read the content of the current data block
without moving</li>
<li>alt+right arrow: move to the start point of the next data block</li>
<li>alt+home: move to the starting point of the current data block</li>
<li>alt+end: move to the end point of the current data block</li>
<li>alt+shift+left arrow: move to the previous data block and select</li>
<li>alt+shift+down key: do not move, only select the content of the current
data block</li>
<li>alt+shift+right arrow: move to the next data block and select</li>
</ul>
<p>In the writing settings, you can choose whether to enable the block
navigation gestures when starting. Press NVDA+alt+n in the editing area to
enable or disable the block navigation gestures, which can be changed in the
input gestures.</p>
<h3>Shortcut gestures (toggle: NVDA+alt+s)</h3>
<p>When the cursor is in the LaTeX block, press the letter, f1~f12 to quickly
insert the bound LaTeX. Press shift+letter, shift+f1~f12 to read out the
LaTeX currently bound to the shortcut. (Need to set the shortcut key in the
command menu first)</p>
<p>In the writing settings, you can choose whether to enable the quick
navigation gestures at startup. Press NVDA+alt+s in the editing area to
enable or disable the quick navigation gestures, which can be changed in the
input gestures.</p>
<h3>Greek letter gestures (toggle: NVDA+alt+g)</h3>
<p>When the cursor is in the LaTeX block, press the letter to quickly insert
the corresponding Greek letter LaTeX.</p>
<p>Mapping table</p>
<p>| English letter | Greek letter | LaTeX | | --- | --- | --- | | a | α |
\alpha | | b | β | \beta | | c | θ | \theta | | d | δ | \delta | | e | ε |
\epsilon | | f | φ | \phi | | g | γ | \gamma | | h | η | \eta | | i | ι |
\iota | | k | κ | \kappa | | l | λ | \lambda | | m | μ | \mu | | n | ν | \nu
| | o | ο | \omicron | | p | π | \pi | | r | ρ | \rho | | s | σ | \sigma | |
t | τ | \tau | | u | υ | \upsilon | | v | φ | \psi | | w | ω | \omega | | x
| χ | \chi | | y | ξ | \xi | | z | ζ | \zeta |</p>
<h3>Browse navigation mode (toggle: NVDA+space)</h3>
<p>When the navigation mode is turned on, the mathematical data block read by
the cursor mobile report will read the mathematical text content instead of
the original grammatical data</p>
<p>You can use the following key gestures to move the editing cursor and
interactive navigation</p>
<ul>
<li>Left key: move to the starting point of the previous data block and read
it out</li>
<li>Right arrow: move to the start point of the next data block and read it
out</li>
<li>Up key: move to the previous line and read out the contents of all data
blocks in this line</li>
<li>Down key: move to the next line and read out the contents of all data
blocks in this line</li>
<li>pageUp: move up ten lines and read out the content of all data blocks in
that line</li>
<li>pageDown: move down ten lines and read out the content of all data blocks
in that line</li>
<li>home: move to the first block of the line where the cursor is located</li>
<li>end: move to the last block of the line where the cursor is located</li>
</ul>
<p>Use the cursor to move the key plus the shift key to select the text
together</p>
<p>space/enter: When the cursor stops on a math block, it can interact with the
math content of the data block to navigate</p>
<p>For the following keys, if you only press the single key, the editing cursor
will jump to the next data block position, if you press shift + the single
key at the same time, the editing cursor will jump to the previous data
block position:</p>
<ul>
<li>l: Move to the next LaTeX data block and read it out</li>
<li>a: Move to the next AsciiMath data block and read it out</li>
<li>n: Move to the next Nemeth data block and read it out</li>
<li>m: move to the next MathML data block and read</li>
<li>t: move to the next text block and read it</li>
<li>tab: move to the next interactive block (math block) and read it out</li>
</ul>
<p>The following key gestures can be used to edit contents</p>
<ul>
<li>ctrl+x: cut the current cursor block</li>
<li>ctrl+c: copy the current cursor block</li>
<li>ctrl+v: Paste content after the current cursor block</li>
<li>delete/back space: delete the current cursor block</li>
</ul>
<h3>Access8Math editor and Access8Math Document</h3>
<p>The edit area of Notepad in Windows 11 is rich editing area not traditional
editing area, so Access8Math editor must be used in Windows 11 to use the
writing feature. This editor provides such as opening old files, saving
files, and view feature.</p>
<p>Use the Access8Math editor to write markdown documents, and when document
have some resource, the resources can put into workspace of editor and be
referenced. When using export feature of the editor, the referenced
resources in the document will be packaged into a Archive file by
Access8Math editor.</p>
<p>The preview and export feature under the view menu are the same as the
command gesture view feature (alt+h), which can generate an Access8Math
Document. The only difference between the two is that the Access8Math editor
will package referenced resources into a archive file</p>
<p>In order to allow the document exported by the Access8Math editor to be
imported again and edited, the Access8Math editor will write a
Access8Math.json when exporting, which is the meta data. We call the archive
file/folder containing this meta is Access8Math Document</p>
<p>In File Explorer, you can press the NVDA+application, if the selected path
is txt/Access8Math Document, a virtual context menu will open, which can
quickly open this file to view or edit it.</p>
<h3>content example:</h3>
<ul>
<li>LaTeX(bracket): The solution of the quadratic equation in one variable
(ax<sup>2</sup>+bx+c=0) is (\frac{-b\pm\sqrt{b<sup>2</sup>-4ac}}{2a}) .</li>
<li>LaTeX(dollar): The solution of the quadratic equation in one variable
$ax<sup>2</sup>+bx+c=0$ is $\frac{-b\pm\sqrt{b<sup>2</sup>-4ac}}{2a}$ .</li>
<li>AsciiMath: The solution of the quadratic equation in one variable
<code>ax^2+bx+c=0</code> is <code>x=(-b+- \sqrt(b^2-4ac))/(2a)</code> .</li>
<li>Nemeth(UEB): The solution of the quadratic equation in one variable
<em>%⠁⠭⠘⠆⠐⠬⠃⠭⠬⠉⠀⠨⠅⠀⠴</em>: is <em>%⠭⠀⠨⠅⠀⠹⠤⠃⠬⠤⠜⠃⠘⠆⠐⠤⠲⠁⠉⠻⠌⠆⠁⠼</em>: .</li>
<li>Nemeth(at): The solution of the quadratic equation in one variable
@⠁⠭⠘⠆⠐⠬⠃⠭⠬⠉⠀⠨⠅⠀⠴@ is @⠭⠀⠨⠅⠀⠹⠤⠃⠬⠤⠜⠃⠘⠆⠐⠤⠲⠁⠉⠻⠌⠆⠁⠼@ .</li>
<li>MathML: The solution of the quadratic equation in one variable ax2+bx+c=0
is −b±b2−4ac2a
.</li>
</ul>
<h2>settings</h2>
<p>All Access8Math settings are centralized in tools -> Access8Math->Settings</p>
<h3>Reading Settings</h3>
<ul>
<li>Language: Access8Math read language</li>
<li>Analyze mathematical meaning of content: perform semantic analysis on the
mathematical content, and when it meets a specific rule, using that rule
to speak.</li>
<li>show interaction window when entering interaction navigation mode: Whether
to show "Access8Math interaction window" when active event entering
interaction navigation mode on math object</li>
<li>Reading pre-defined meaning in dictionary in interaction navigation mode:
When the pattern is definied in the dictionary, use dictionary to read the
meaning of subpart in the upper layer part.</li>
<li>Reading of auto-generated meaning in interaction navigation mode: When the
pattern is not difined or incomplete in dictionary, use automatic
generation function to read the meaning of subpart in the upper layer
part.</li>
<li>use tone indicate to no move in interaction navigation mode</li>
<li>Item interval time: Setting break time between items. Values from 1 to
100, the smaller the value, the shorter the break time, and the greater
the value, the longer the break time.</li>
</ul>
<h3>Writing Settings</h3>
<ul>
<li>Activate command gesture at startup</li>
<li>Activate block navigate gesture at startup</li>
<li>Activate shortcut gesture at startup</li>
<li>Use audio indicate to switching of browse navigation mode</li>
<li>HTML document display:</li>
<li>HTML math display:</li>
<li>LaTeX delimiter:</li>
</ul>
<h3>Rule setting: Setting whether rules are actived</h3>
<h3>Math reader</h3>
<ul>
<li>Speech source:</li>
<li>Braille source:</li>
<li>Interact source:</li>
</ul>
<h2>localization</h2>
<p>If you want Access8Math to have speech/braille output for MathML in different languages, you need to create a Unicode dictionary (unicode.dic) and mathematical rules (math.rule). This can be done using the GUI in Access8Math -> Localization, or by referring to the globalPlugins/Access8Math/locale in the plugin folder.</p>
<p>The "Unicode Dictionary" enables you to customize speech or braille output
for symbols and characters. The "Mathematics Rules" allow you to customize
speech or braille output for different types of mathematics.</p>
<p>"New language" dialog can adding language not included in Access8Math
built-in. Upon Adding language option will appear in the Reading Settings
language selection, Allowing for the Definition of speech/braille via the
Unicode Dictionary and Mathematics Rules, Resulting in Localization.</p>
<h3>Math Rules</h3>
<p>Access8Math establishes mathematical rules according to the mathematical
type and logic to decide the reading math method and order. According to
different local math reading logic, the math reading text and order can be
changed. The method is as follows:</p>
<p>Edit: After entering the "math rule", the window lists 46 math rules. Choose
any math rule and select the "Edit" to enter the editing entry.</p>
<p>The "editing entry" can be divided into two major blocks, the "Serialized
ordering" and the "Child role".</p>
<ul>
<li>Serialized ordering: Math rule is divided into multiple blocks according
to the reading order. In this area, the reading order of child node and
the delimitation text of start, inter- and the end can be changed. Taking
the fractional rule mfrac as an example, this rule is divided into five
reading blocks. The order 0, 2, and 4 represent the initial prompt, the
project segmentation prompt, and the end prompt, respectively, and the
meanings text can be changed in each field. Order 1 and 3 adjust the
reading sequence of child node which can be changed in the drop-down menu.</li>
<li>Child role: The next-level sub-item of the mathematical rule. Taking the
fractional rule mfrac as an example, the rule contains the numerator and
the denominator. The sub-content in the upper sub-content meaning can be
changed in the child-node role field.</li>
</ul>
<p>Example: You can check the reading method of this math rule after
editing. After clicking, a math content is preset the corresponding math
rules for confirming whether the reading method is as expected.</p>
<p>Recover default: Restores the list of math rules to their initial presets.</p>
<p>Import: Import math rules files, which can be used to load math rules files.</p>
<p>Export: Save the math rules file to the specified path to share or keep.</p>
<h2>example</h2>
<p>Math contents in Wiki are all written by MathML.</p>
<ul>
<li>Quadratic equation: https://en.wikipedia.org/wiki/Quadratic_equation</li>
<li>Matrix multiplication: https://en.wikipedia.org/wiki/Matrix_multiplication</li>
<li>Cubic function: https://en.wikipedia.org/wiki/Cubic_function</li>
</ul>
<p>Quadratic equation</p>
<ul>
<li>LaTeX: (x=\frac{-b\pm\sqrt{b<sup>2</sup>-4ac}}{2a})</li>
<li>AsciiMath: <code>x=(-b+- \sqrt(b^2-4ac))/(2a)</code></li>
<li>MathML: -b±b2-4ac2a</li>
</ul>
<p>github: https://github.com/tsengwoody/Access8Math</p>
<p>Please report any bugs or comments, thank you!</p>
<h1>Access8Math update log</h1>
<h2>Access8Math v3.6 Update</h2>
<ul>
<li>new feature: Nemeth Braille Input, with the same functionality as LaTeX
input. Allows for real-time interactive navigation (Alt+I) during editing
and supports outputting HTML+MathML documents.</li>
<li>new feature: Added Nemeth delimiter UEB/at(@@) for distinguish Nemeth
content.</li>
<li>new feature: You can convert and copy LaTeX from Math object in
interactive navigation mode.</li>
<li>Added the NVDA+Shift+F10 shortcut to open virtual context menu in the file
explorer.</li>
<li>Fixed and optimized localized UI issues and cleaned localized file format.</li>
</ul>
<h2>Access8Math v3.5 Update</h2>
<ul>
<li>Vectors and rays can be distinguished correctly</li>
<li>Utilizing dialogue to display image, video, or audio resources in an
Access8Math HTML document</li>
<li>Using a new window to open link resources in an Access8Math HTML document</li>
<li>The MathML namespace is exported when copying MathML from the Math object
in interactive navigation mode</li>
<li>Display font adjustment, find and replace feature in Access8Math editor</li>
<li>Compatibility with NVDA 2023.1</li>
</ul>
<h2>Access8Math v3.4 Update</h2>
<ul>
<li>Speech, Braille, and interactive source move to Preferences -> Settings ->
Math Reader category.</li>
<li>Integrated MathCAT, you can choose what speech, braille, and interactive
source(Access8Math/Math Player/MathCAT) you need in Math Reader settings
panel when having already installed Math Player/MathCat.</li>
<li>Used MultiCategorySettingsDialog to collect settings dialog.</li>
<li>Press NVDA+alt+e open text file with the built-in editor in File Explore.</li>
<li>In virtual menus, submenu can open by enter</li>
<li>Implenment MathML menclose tag rule</li>
<li>new feature: virtual context menu in File Explorer. It can quickly open
Access8Math Document to view or edit it(Please read "Access8Math editor
and Access8Math Document" section to know detail information)</li>
</ul>
<h2>Access8Math v3.3 Update</h2>
<ul>
<li>Add built-in editor using traditional editing area because of windows 11
changed to UIA editing area</li>
<li>built-in editor new/open/save feature</li>
<li>Access8Math language initial setting is based on NVDA language setting</li>
<li>Improved speech and braille display in virtual menus</li>
<li>Compatibility with NVDA 2022.1</li>
<li>Fixed marked menu cannot open when document is empty</li>
<li>Fixed translate LaTeX/AsciiMath feature</li>
<li>Fixed HTML document rendering problem when HTML document display setting
choice text option</li>
</ul>
<h2>Access8Math v3.2 Update</h2>
<ul>
<li>New feature "<code>" to separate data blocks, the blocks enclosed by "</code>" are
AsciiMath data</li>
<li>New feature editing-shortcut for browse navigation mode cut (ctrl+x), copy
(ctrl+c), paste (ctrl+v), delete (delete/back space)</li>
<li>New feature moving-shortcut for browse navigation mode move between
interactive data blocks (tab), move between AsciiMath data blocks (a)</li>
<li>Change move cursor way in browse navigation mode - move cursor way with
up, down, left and right arrow keys and read out the contents of the data
block after the movement.</li>
<li>When the cursor moves in the browse navigation mode, the math data block
will read the serialized textual content of math instead of the source
code</li>
<li>When the cursor is in the math data block in the browse navigation mode,
press the space or enter key to interact with the math data block.</li>
<li>New feature English letters as shortcut keys that can be setted</li>
<li>New feature greek alphabet shortcut gesture</li>
<li>Shortcut key input is only apply in the LaTeX area</li>
<li>set using audio or speech indicate to switching of browse navigation mode</li>
<li>The LaTeX command menu can be opened in the text area and insert LaTeX
separators when LaTeX command inserting</li>
<li>New feature translation menu, which can convert the LaTeX/AsciiMath data
format of the block where the cursor is located. It belongs to the command
gesture group. When the cursor is in the LaTeX/AsciiMath block, press
alt+t to open the translation menu (in the browse navigation mode, ctrl+t)</li>
<li>New feature batch menu, which can convert the entire document
LaTeX/AsciiMath data format to each other, and can convert the LaTeX
separator between brackets and dollar. It belongs to the command gesture
group. Press alt+b to open the batch menu</li>
<li>Added MathML block type, support alt+i, single letter navigation "m", tab
movement in browse navigation mode</li>
<li>New feature braille custom-defined math rules and unicode dictionary,
which are the same as speech</li>
<li>The exported HTML can show with markdown</li>
<li>The exported HTML is added page title and file name by notepad window
title.</li>
</ul>
<h2>Access8Math v3.1 Update</h2>
<ul>
<li>HTML windows are now presented as virtual menu</li>
<li>Fixed an issue where the HTML view cannot be converted when text include
"`" character</li>
<li>When the number of words in the document is greater than 4096, the content
will not be converted to HTML view</li>
<li>Added mathematical set LaTeX commands</li>
<li>Update alt+m to insert "(", ")" LaTeX marks before and after the
currently selected text (when there is no selected text, it is the current
cursor position)</li>
<li>In the General settings, you can choose whether the math content in the
exported HTML is presented on a separate line(block/inline)</li>
<li>When exporting HTML, save the original text file in the compressed file</li>
<li>In the general settings, you can choose to use bracket or money symbol as
the LaTeX delimiter</li>
<li>In the general settings, you can choose the source of speech, braille, and
interaction(Access8Math or Math Player)</li>
<li>Activate/deactivate write/block navigate/shortcut gesture by gesture</li>
<li>switch the source of speech/braille/interact source by gesture(Access8Math
or Math Player)</li>
</ul>
<h1>Access8Math v3.0 Update</h1>
<ul>
<li>Write mathematical content in AsciiMath</li>
<li>Write mathematical content in LaTeX</li>
<li>Writing mixed content (text content and mathematical content)</li>
<li>Use shortcut keys to move the cursor to different types of blocks in edit
field</li>
<li>Use command menu to select commands in edit field</li>
<li>Set shortcuts in the LaTeX command menu</li>
<li>Review and export content in edit field to HTML</li>
</ul>
<h1>Access8Math v2.6 Update</h1>
<ul>
<li>Auto entering interactive mode when showing Access8Math interaction
window.</li>
<li>You can choose how to hint no movement in interactive mode: beep or speech
'no move' two way.</li>
<li>The content of the current item will be repeated again When there is no
movement.</li>
</ul>
<h1>Access8Math v2.5 Update</h1>
<ul>
<li>Adding Russian translation of rules and UI. Thanks to the translation work
of Futyn-Maker.</li>
<li>Fixing compound symbol translation failed bug.</li>
<li>Removing duplicates of lowercase letters and added general uppercases in
en unicode.dic(0370~03FF).</li>
</ul>
<h1>Access8Math v2.4 Update</h1>
<ul>
<li>Fix bug.</li>
</ul>
<h1>Access8Math v2.3 Update</h1>
<ul>
<li>Compatibility with Python3</li>
<li>refactoring module and fix code style</li>
<li>Adding one symbol vector rule</li>
</ul>
<h1>Access8Math v2.2 Update</h1>
<ul>
<li>fix bug incorrect speech when a single node has more characters.</li>
<li>Fix compatibility issue in NVDA 2019.2, thanks to pull requests of
CyrilleB79.</li>
<li>Fix bug in unicode dict has duplicate symbols.</li>
<li>Add translations in French, thanks to the translation work of CyrilleB79.</li>
<li>Adjust keyboard shortcut.</li>
</ul>
<h1>Access8Math v2.1 Update</h1>
<ul>
<li>In "General Settings", you can set whether "Access8Math interaction
window" is automatically displayed when entering interactive mode.</li>
<li>In interactive mode, "interaction window" can be displayed manually via
ctrl+m when "interaction window" are not showed.</li>
<li>Fix multi-language switching bug.</li>
<li>Add translations in Turkish, thanks to the translation work of cagri
(çağrı doğan).</li>
<li>Compatibility update for nvda 2019.1 check for add-on`s manifest.ini flag.</li>
<li>Refactoring dialog window source code.</li>
</ul>
<h1>Access8Math v2.0 Update</h1>
<ul>
<li>Add multi-language new-adding and customizing settings,and add three
windows of "unicode dictionary", "math rule", "New language adding"</li>
<li>The "unicode dictionary" can customize the reading way of each math
symbolic text.</li>
<li>"math rule" can customize the reading method and preview the modification
through the sample button before completed.</li>
<li>"New language adding" allows adding language not provided in the built-in
system. The newly language will be added to the general settings, and
multi-language customization can be achieved through reading definition of
"unicode dictionary" and "mathematical rules".</li>
<li>improved in interactive mode, you can use the number keys 7~9 to read
sequence text in the unit of line.</li>
</ul>
<h1>Access8Math v1.5 update log</h1>
<ul>
<li>In "general setting" dialog box add setting pause time between
items. Values from 1 to 100, the smaller the value, the shorter the pause
time, and the greater the value, the longer the pause time.</li>
<li>Fix setting dialog box can't save configure in NVDA 2018.2.</li>
</ul>
<h1>Access8Math v1.4 update log</h1>
<ul>
<li>Adjust settings dialog box which divided into "general setting" and "rules
setting" dialog box. "General Settings" is the original "Access8Math
Settings" dialog box, and "Rule Settings" dialog box is for selecting
whether specific rules are enabled.</li>
<li><p>New rules</p>
<ul>
<li>vector rule: When there is a "⇀" right above two Identifier, the item
is read as "Vector...".</li>
<li>frown rule:When there is a " ⌢ " right above two Identifier, the item
is read as "frown...".</li>
</ul>
</li>
<li><p>Fix bug.</p></li>
</ul>
<h1>Access8Math v1.3 update log</h1>
<ul>
<li><p>New rule</p>
<ul>
<li>positive rule: Read "positive" rather than "plus" when plus sign in
first item or its previous item is certain operator.</li>
<li>square rule: When the power is 2, the item is read as "squared".</li>
<li>cubic rule: When the power is 3, the item is read as "cubed".</li>
<li>line rule: When there is "↔" right above two Identifier, the item is
read as "Line ...".</li>
<li>line segment rule: When there is "¯" right above two Identifier, the
item is read as "Line segement ...".</li>
<li>ray rule: When there is a "→" right above two Identifier, the item is
read as "Ray ..."</li>
</ul>
</li>
<li><p>Add interaction window: Pressing "Space" in math content to open
"Access8Math interaction window" which contains "interaction" and "copy"
button.</p>
<ul>
<li>interaction: Into math content to navigate and browse.</li>
<li>copy: Copy MathML object source code.</li>
</ul>
</li>
<li><p>Add zh_CN UI language(.po).</p></li>
<li>Adjust inheritance relationship between rules to ensure proper use of the
appropriate rules in conflict.</li>
<li>Fix bug.</li>
</ul>
<h1>Access8Math v1.2 update log</h1>
<ul>
<li><p>New rule</p>
<ul>
<li>negative number rule: Read 'negative' rather than 'minus sign' when
minus sign in first item or its previous item is certain operator.</li>
<li>integer add fraction rule: Read 'add' between integer and fraction
when fraction previous item is integer.</li>
</ul>
</li>
<li><p>Program architecture improve</p>
<ul>
<li>add sibling class</li>
<li>add dynamic generate Complement class</li>
</ul>
</li>
<li><p>Fix bug</p></li>
</ul>
<h1>Access8Math v1.1 update log</h1>
<ul>
<li>In navigation mode command, "Ctrl+c" copy object MathML source code.</li>
<li><p>Settings dialog box in Preferences:</p>
<ul>
<li>Language: Access8Math reading language on math content.</li>
<li>Analyze the mathematical meaning of content: Semantically analyze the
math content, in line with specific rules, read in mathematical
meaning of that rules.</li>
<li>Read defined meaning in dictionary: When the pattern is definied in
the dictionary, use dictionary to read the meaning of subpart in the
upper layer part.</li>
<li>Read of auto-generated meaning: When the pattern is not difined or
incomplete in dictionary, use automatic generation function to read
the meaning of subpart in the upper layer part.</li>
</ul>
</li>
<li><p>Add some simple rule. Single rules are simplified versions of various
rules. When the content only has one single item, for better understanding
and reading without confusion, you can omit to choose not to read the
script before and after the content.</p></li>
<li>Update unicode.dic.</li>
<li>Fix bug.</li>
</ul>
Text Informationhttp://addons.nvda-project.org/addons/textInformation.hu.html2023-05-10T20:38:33Z2018-05-05T15:13:43Z
<ul>
<li>Author: Carter Temm</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=txtinfo">stable version</a></li>
</ul>
<p>This add-on allows for getting information based on selected text. Simply
select something and use a keystroke to get information. You should,
hopefully, be presented with something that fits the context.</p>
<p>note: This package is distributed under the terms of the GNU General Public
License, version 2 or later. Please see the file COPYING.txt for further
details.</p>
<h2>keystrokes</h2>
<p>note: These keystrokes asume your using the english keyboard layout, and
might not work otherwise. If there's a problem, first try changing them in
the input gestures dialog.</p>
<ul>
<li>NVDA+; (semicolon): provides information based on the text that's selected</li>
<li>NVDA+SHIFT+; (semicolon): provides information about text on the clipboard</li>
<li>NVDA+control+; (semicolon): speaks the last reported information. Press
twice to get it displayed in a dialog.</li>
</ul>
<h2>supported services</h2>
<p>Currently, the following features are supported:</p>
<ul>
<li>IP address information using the IPInfoDB API. An API key is provided,
however I by no means guarantee it'll always work. You can generate your
own, and enter it at the top of <strong>init</strong>.py, replacing the old one.</li>
<li>english dictionary definitions from the princeton wordnetweb. Note: these
definitions are not the best, and the database lacks definitions for
simple words, e.g. could, you, etc.</li>
<li>ISBN lookups via the google books API</li>
<li>credit card type verification</li>
</ul>
<p>Note: Regular expressions are used to verify data. There are currently some
that aren't used, phone numbers and emails. This might be changed in the
future.</p>
<h2>contributing</h2>
<p>Contributions are appreciated. You can either submit a PR, or get in contact
with the following info:</p>
<p>twitter: @cartertemm</p>
<p>email: crtbraille@gmail.com</p>
SentenceNavhttp://addons.nvda-project.org/addons/sentenceNav.hu.html2023-05-10T20:38:33Z2018-01-25T05:02:56Z
<ul>
<li>Author: Tony Malykh</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=sentencenav">stable version</a> (compatible with NVDA 2019.3 and beyond)</li>
</ul>
<p>SentenceNav is an NVDA add-on that allows you to read text by sentences, as
opposed to by paragraphs or words.</p>
<p>Please note that "Jump to next paragraph with text" feature has been move to
<a href="http://github.com/mltony/nvda-text-nav/">TextNav</a> add-on that needs to be
installed separately.</p>
<h2>Keystrokes</h2>
<ul>
<li>Alt+Down: Go to next sentence.</li>
<li>Alt+Up: Go to previous sentence.</li>
<li>NVDA+Alt+S: Speak current sentence.</li>
<li>Alt+Windows+Down: Go to next phrase.</li>
<li>Alt+Windows+Up: Go to previous phrase.</li>
</ul>
<p>Please note that "Jump to next paragraph with text" feature has been move to
<a href="http://github.com/mltony/nvda-text-nav/">TextNav</a> add-on that needs to be
installed separately.</p>
<h2>Notes and known issues</h2>
<ul>
<li>Sentence markup is done by heuristic algorithms and is not 100%
accurate. Expect SentenceNav to occasionally make mistakes, such as
breaking a sentence where it's not supposed to be broken or the other way
around - missing a border between two sentences and speaking them
together.</li>
<li>Experimental support for Microsoft Word and WordPad has been added as of
version 2.8.</li>
<li>Sentence navigation keystrokes Alt+Up/Down might conflict with built-in
keystrokes in applications. SentenceNav developers strive to resolve these
conflicts whenever possible. However, if you encounter such a situation, a
simple workaround is to press NVDA+F2 (Pass next key through), followed by
the conflicting keystroke Alt+Up/Down to make sure that this keystroke
would be processed by the application and not by SentenceNav.</li>
</ul>
<h2>Algorithm</h2>
<p>SentenceNav uses a regular expression to find sentence boundaries. The
regular expression is looking for:</p>
<ul>
<li>One or more "Sentence breaker" punctuation marks, such as period,
exclamation sign or question sign, followed immediately by one or more
spaces.</li>
<li>Sentence breakers can optionally be followed by one or more "Skippable"
punctuation signs, such as closing parenthesis, or a quote.</li>
<li>Sentence breakers can optionally be followed by a Wikipedia-style
reference, e.g. [4], or [citation needed].</li>
<li>Sentence breakers must not be preceded by any of the exceptional
abbreviations, such as Dr., Mr., Prof., etc. Exceptional abbreviations are
language-dependent. Exceptional abbreviations are defined as abreviations
spelled with a period, which in most cases does not indicate the end of
the sentence.</li>
<li>Sentence breakers must not be preceded by a single capital letter. This is
to prevent sentences being broken at people's initials, such as George
R. R. Martin. The list of capital letters is language-dependent.</li>
<li>Alternatively, the regular expression can match one of the full-width
sentence breakers. Full-width punctuation is used in some languages, like
Chinese and Japanese and there is no requirement to be followed or
preceded by anything to be counted as the boundary of sentences.</li>
<li>Alternatively, double new line counts as a sentence breaker.</li>
</ul>
<p>Phrase detection is performed by another regular expression, that matches:</p>
<ul>
<li>One or more "phrase breakers" punctuation marks followed immediately by
one or more spaces.</li>
<li>Or alternatively, one or more "fixed-width" phrase brakers, with no
requirement of being followed by spaces.</li>
<li>Or alternatively, double new line.</li>
</ul>
<h2>Other settings</h2>
<ul>
<li>Reconstruct sentences across multiple paragraphs: sentences can span
across multiple paragraphs. This often happnes in malformed PDF documents,
or in email messages written as plain text. With this combo box you can
tell SentenceNav to try to identify those sentences and speak them
correctly. Sometimes however, it would speak paragraphs together that are
not meant to be sentences. In this case you can disable that feature.</li>
<li>Disable SentenceNav in applications: You can disable SentenceNav in
certain applications. For example, some applications use Alt+Down
keystroke to perform other functions. This is a comma-separated blacklist
of applications where sentence navigation will be disabled. If you are not
sure what should be the name of your application, switch to that
application, Press NVDA+Control+Z to open up NVDA console and type:
"focus.appModule.appName" without quotes to obtain the name of current
application.</li>
</ul>
<h2>Source code</h2>
<p>Source code is available at <a href="http://github.com/mltony/nvda-sentence-nav">http://github.com/mltony/nvda-sentence-nav</a>.</p>
<h2>Downloads</h2>
<ul>
<li>Current stable version:
<a href="https://github.com/mltony/nvda-sentence-nav/releases/latest/download/SentenceNav.nvda-addon">SentenceNav</a></li>
<li>Last Python 2 version (compatible with NVDA 2019.2 and prior):
<a href="https://github.com/mltony/nvda-sentence-nav/releases/download/v2.5/SentenceNav-2.5.nvda-addon">SentenceNav
v2.5</a></li>
</ul>
BrailleExtenderhttp://addons.nvda-project.org/addons/brailleExtender.hu.html2024-02-13T14:36:10Z2018-01-03T19:52:47Z
<ul>
<li>Author: André-Abush Clause and contributors</li>
<li>NVDA compatibility: 2019.3 and beyond</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=brlext">stable version</a></li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=brlext-dev">development version</a></li>
</ul>
<p>BrailleExtender is an <a href="http://nvda-project.org/">NVDA</a> add-on that provides
various features at braille level. Currently, the following features are
implemented:</p>
<ul>
<li>reload two favorite braille display with shortcuts.</li>
<li>automatic review cursor tethering in terminal role like in PuTTY,
Powershell, bash, cmd.</li>
<li>auto scroll.</li>
<li>switch between several input/output braille tables.</li>
<li>mark the text with special attributes through dot 7, dot 8 or both.</li>
<li>use two output braille tables simultaneously.</li>
<li>display tab signs as spaces.</li>
<li>reverse forward scroll and back scroll buttons.</li>
<li>say the current line during text scrolling either in review mode, or in
focus mode or both.</li>
<li>translate text easily in Unicode braille and vice versa. E.g.: z <--> ⠵.</li>
<li>convert cell description to Unicode braille and vice versa. E.g.: 123 <-->
⠇.</li>
<li>lock braille keyboard.</li>
<li>launch an application/URL with gesture.</li>
<li>braille dictionaries.</li>
<li>type with one-hand from braille keyboard.</li>
<li>display undefined characters from braille tables (including emojis) using
altenative representations.</li>
<li>enter any character from braille keyboard (including emojis).</li>
<li>skip blank lines during text scrolling.</li>
<li>and much more!</li>
</ul>
<p>For some braille displays, it extends the braille display commands to
provide:</p>
<ul>
<li>offer complete gesture maps including function keys, multimedia keys,
quick navigation, etc.;</li>
<li>emulate modifier keys, and thus any keyboard shortcut;</li>
<li>offer several keyboard configurations concerning the possibility to input
dots 7 and 8, enter and backspace;</li>
<li>add actions and quick navigation through a rotor.</li>
</ul>
<p>Once the add-on is installed, read the documentation and go through the
settings using the BrailleExtender submenu (located in the NVDA menu).</p>
<h2>Let's explore some common features</h2>
<h3>Representation of undefined characters</h3>
<p>The extension allows you to customize how an undefined character should be
represented within a braille table. To do so, go to the — Representation of
undefined characters — settings. You can choose between the following
representations:</p>
<ul>
<li>Use braille table behavior (no description possible)</li>
<li>Dots 1-8 (⣿)</li>
<li>Dots 1-6 (⠿)</li>
<li>Empty cell (⠀)</li>
<li>Other dot pattern (e.g.: 6-123456)</li>
<li>Question mark (depending on output table)</li>
<li>Other sign/pattern (e.g.: ??)</li>
<li>Hexadecimal</li>
<li>Hexadecimal, HUC8</li>
<li>Hexadecimal, HUC6</li>
<li>Decimal</li>
<li>Octal</li>
<li>Binary</li>
</ul>
<p>You can also combine this option with the “describe the character if
possible” setting.</p>
<p>Notes:</p>
<ul>
<li>To distinguish the undefined set of characters while maximizing space, the
best combination is the usage of the HUC8 representation without checking
the “Show punctuation/symbol name for undefined characters if available”
option.</li>
<li>To learn more about the HUC representation, see
<a href="https://danielmayr.at/huc/">https://danielmayr.at/huc/</a></li>
<li>Keep in mind that definitions in tables and those in your table
dictionaries take precedence over character descriptions, which also take
precedence over the chosen representation for undefined characters.</li>
</ul>
<h3>Getting Current Character Info</h3>
<p>This feature allows you to obtain various information regarding the
character under the cursor using the current input braille table, such as:
the HUC8 and HUC6 representations; the hexadecimal, decimal, octal or binary
values; A description of the character if possible; the Unicode braille
representation and the braille pattern dots.</p>
<p>Pressing the defined gesture associated to this function once shows you the
information in a flash message and a double-press displays the same
information in a virtual NVDA buffer.</p>
<p>On supported displays the defined gesture is ⡉+space. No system gestures are
defined by default.</p>
<p>For example, for the '&' character, we will get the following information:</p>
<blockquote><p>&: 0x26, 38, 0o46, 0b100110<br />
and (AMPERSAND [Po])<br />
⢿ (1234568)<br />
⣥⣺⡧, ⠿⠺⠏⠏</p></blockquote>
<h3>Advanced braille input</h3>
<p>This feature allows you to enter any character from its HUC8 representation
or its hexadecimal/decimal/octal/binary value. Moreover, it allows you to
develop abbreviations. To use this function, enter the advanced input mode
and then enter the desired pattern. Default gestures: NVDA+Windows+i or
⡊+space (on supported displays). Press the same gesture to exit this
mode. Alternatively, an option allows you to automatically exit this mode
after entering a single pattern. If you want to enter a character from its
HUC8 representation, simply enter the HUC8 pattern. Since a HUC8 sequence
must fit on 3 or 4 cells, the interpretation will be performed each time 3
or 4 dot combinations are entered. If you wish to enter a character from its
hexadecimal, decimal, octal or binary value, do the following:</p>
<ol>
<li>Enter ⠼</li>
<li><p>Specify the basis as follows:</p>
<ul>
<li>⠭ or ⠓: for a hexadecimal value</li>
<li>⠙: for a decimal value</li>
<li>⠕: for an octal value</li>
<li>⠃: for a binary value</li>
</ul>
</li>
<li><p>Enter the value of the character according to the previously selected
basis.</p></li>
<li>Press Space to validate.</li>
</ol>
<p>For abbreviations, you must first add them in the dialog box — Advanced
input mode dictionary —. Then, you just have to enter your abbreviation and
press space to expand it. For example, you can define the following
abbreviations: "⠎⠺" with "sandwich", "⠋⠛⠋⠗" to "🇫🇷".</p>
<p>Here are some examples of sequences to be entered for given characters:</p>
<table>
<thead>
<tr>
<th> Character </th>
<th> HUC8 </th>
<th> Hexadecimal </th>
<th> Decimal </th>
<th> Octal </th>
<th> Binary </th>
</tr>
</thead>
<tbody>
<tr>
<td> 👍 (thumbs up) </td>
<td> ⣭⢤⡙ </td>
<td> ⠭1f44d or ⠓1f44d </td>
<td> ⠙128077 </td>
<td> ⠕372115 </td>
<td> ⠃11111010001001101 </td>
</tr>
<tr>
<td> 😀 (grinning face) </td>
<td> ⣭⡤⣺ </td>
<td> ⠭1f600 or ⠓1f600 </td>
<td> ⠙128512 </td>
<td> ⠕373000 </td>
<td> ⠃11111011000000000 </td>
</tr>
<tr>
<td> 🍑 (peach) </td>
<td> ⣭⠤⠕ </td>
<td> ⠭1f351 or ⠓1f351 </td>
<td> ⠙127825 </td>
<td> ⠕371521 </td>
<td> ⠃11111001101010001 </td>
</tr>
<tr>
<td> 🌊 (water wave) </td>
<td> ⣭⠤⠺ </td>
<td> ⠭1f30a or ⠓1f30a </td>
<td> ⠙127754 </td>
<td> ⠕371412 </td>
<td> ⠃11111001100001010 </td>
</tr>
</tbody>
</table>
<p>Note: the HUC6 input is currently not supported.</p>
<h3>One-hand mode</h3>
<p>This feature allows you to compose a cell in several steps. This can be
activated in the general settings of the extension's preferences or on the
fly using NVDA+Windows+h gesture by default (⡂+space on supported
displays). Three input methods are available.</p>
<h4>Method #1: fill a cell in 2 stages on both sides</h4>
<p>With this method, type the left side dots, then the right side dots. If one
side is empty, type the dots correspondig to the opposite side twice, or
type the dots corresponding to the non-empty side in 2 steps.</p>
<p>For example:</p>
<ul>
<li>For ⠛: press dots 1-2 then dots 4-5.</li>
<li>For ⠃: press dots 1-2 then dots 1-2, or dot 1 then dot 2.</li>
<li>For ⠘: press 4-5 then 4-5, or dot 4 then dot 5.</li>
</ul>
<h4>Method #2: fill a cell in two stages on one side (Space = empty side)</h4>
<p>Using this method, you can compose a cell with one hand, regardless of which
side of the Braille keyboard you choose. The first step allows you to enter
dots 1-2-3-7 and the second one 4-5-6-8. If one side is empty, press
space. An empty cell will be obtained by pressing the space key twice.</p>
<p>For example:</p>
<ul>
<li>For ⠛: press dots 1-2 then dots 1-2, or dots 4-5 then dots 4-5.</li>
<li>For ⠃: press dots 1-2 then space, or 4-5 then space.</li>
<li>For ⠘: press space then 1-2, or space then dots 4-5.</li>
</ul>
<h4>Method #3: fill a cell dots by dots (each dot is a toggle, press Space to validate the character)</h4>
<p>In this mode, each dot is a toggle. You must press the space key as soon as
the cell you have entered is the desired one to input the character. Thus,
the more dots are contained in the cell, the more ways you have to enter the
character.</p>
<p>For example, for ⠛, you can compose the cell in the following ways:</p>
<ul>
<li>Dots 1-2, then dots 4-5, then space.</li>
<li>Dots 1-2-3, then dot 3 (to correct), then dots 4-5, then space.</li>
<li>Dot 1, then dots 2-4-5, then space.</li>
<li>Dots 1-2-4, then dot 5, then space.</li>
<li>Dot 2, then dot 1, then dot 5, then dot 4, and then space.</li>
<li>Etc.</li>
</ul>
IndentNavhttp://addons.nvda-project.org/addons/indentNav.hu.html2024-02-13T14:36:12Z2018-01-03T19:52:47Z
<ul>
<li>Author: Tony Malykh</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=indentnav">stable version</a></li>
</ul>
<p>This add-on allows NVDA users to navigate by indentation level or offset of
lines or paragraphs. In browsers it allows to quickly find paragraphs with
the same offset from the left edge of the screen, such as first level
comments in a hierarchical tree of comments. Also while editing source code
in many programming languages, it allows to jump between the lines of the
same indentation level, as well as quickly find lines with greater or lesser
indentation level.</p>
<h2>Usage in browsers</h2>
<p>IndentNav can be used to navigate by offset from the left edge of the
screen. IN particular, you can press NVDA+Alt+DownArrow or UpArrow to jump
to the next or previous paragraph that has the same offset. For example,
this can be useful when browsing hierarchical trees of comments (e.g. on
reddit.com) to jump between first level comments and skipping all the higher
level comments.</p>
<p>Strictly speaking, IndentNav can be used in any application, for which NVDA
provides a tree interceptor object.</p>
<p>Keystrokes:</p>
<ul>
<li>NVDA+Alt+UpArrow or DownArrow: Jump to previous or next paragraph with the
same offset.</li>
<li>NVDA+alt+LeftArrow: Jump to previous paragraph with lesser offset.</li>
<li>NVDA+Alt+RightArrow: Jump to next paragraph with greater offset.</li>
</ul>
<h2>Usage in text editors</h2>
<p>IndentNav can also be useful for editing source code in many programming
languages. Languages like Python require the source code to be properly
indented, while in many other programming languages it is strongly
recommended. With IndentNav you can press NVDA+Alt+DownArrow or UpArrow to
jump to next or previous line with the same indentation level. You can also
press NVDA+Alt+LeftArrow to jump to a parent line, that is a previous line
with lower indentation level. In Python you can easily find current
function definition or class definition. You can also press
NVDA+Alt+RightArrow to go to the first child of current line, that is next
line with greater indentation level.</p>
<p>If your NVDA is set to express line indentation as tones, then IndentNav
will quickly play the tones of all the skipped lines. Otherwise it will
only crackle to roughly denote the number of skipped lines.</p>
<p>Keystrokes:</p>
<ul>
<li>NVDA+Alt+UpArrow or DownArrow: Jump to previous or next line with the same
indentation level within the current indetnation block.</li>
<li>NVDA+Alt+Control+UpArrow or DownArrow: Force-jump to previous or next line
with the same indentation level. This command will jump to other
indentation blocks (such as other Python functions) if necessary.</li>
<li>NVDA+alt+LeftArrow: Jump to parent - that is previous line with lesser
indentation level.</li>
<li>NVDA+Alt+RightArrow: Jump to first child - that is next line with greater
indentation level within the same indentation block.</li>
</ul>
<h2>Release history</h2>
<ul>
<li><a href="https://github.com/mltony/nvda-indent-nav/raw/master/releases/IndentNav-1.2.nvda-addon">v1.2</a>
<ul>
<li>Added support for internationalization.</li>
<li>Added GPL headers in the source files.</li>
<li>Minor fixes.</li>
</ul>
</li>
<li><a href="https://github.com/mltony/nvda-indent-nav/raw/master/releases/IndentNav-1.1.nvda-addon">v1.1</a>
<ul>
<li>Initial release.</li>
</ul>
</li>
</ul>
Mozilla Apps Enhancementshttp://addons.nvda-project.org/addons/mozillaScripts.hu.html2024-02-13T14:36:02Z2017-12-18T17:28:07Z
<ul>
<li>Author: Javi Dominguez</li>
<li>download <a href="https://www.nvaccess.org/addonStore/legacy?file=moz">stable version</a></li>
</ul>
<p>This add-on provides NVDA enhancements for Mozilla aps.</p>
<h2>Firefox</h2>
<ul>
<li>NVDA+A (desktop) or NVDA+Control+A (laptop) Reads the page address. If
pressed twice quickly, copies it to clipboard.</li>
<li>NVDA+End (desktop) or NVDA+Shift+End (laptop) Reads the status bar. If
pressed twice quickly, copies it to clipboard.</li>
<li>NVDA+F8 Shows a list of opened tabs. If pressed twice quickly, shows
buttons of tool bar.</li>
<li>NVDA+Control+N Reads the last notification and it takes the system focus
to it if it is possible. By pressing two times quickly shows the history
of notifications.</li>
<li>NVDA+F6 Brings the focus to the document.</li>
</ul>
<h2>Thunderbird</h2>
<ul>
<li>In a message window:
<ul>
<li>Control+Shift+(1-4) Reads the sender and recipients of the message. If pressed twice quickly, opens the options menu.</li>
<li>Control+Shift+5 Reads the subject of the message.</li>
<li>Control+Shift+6 Reads date of the message.</li>
<li>Control+Shift+A Brings the focus to the list of attachments, if any.
(These scripts are also available in the list of messages if you activate the preview pane.)</li>
</ul>
</li>
<li>In the bar of fast filtering:
<ul>
<li>Press down Arrow to display more options, enter to check/unchek the selected option.</li>
</ul>
</li>
<li>In messages list:
<ul>
<li>If the preview pane is active, press NVDA+downArrow (desktop) or NVDA+A (laptop) to read the message without leaving the list.</li>
<li>Control+NVDA+1-9 moves between columns.</li>
<li>NVDA+H Displays a dialog in which you can change the order of the columns in the message list.</li>
</ul>
</li>
</ul>
<p>Keystrokes can be customized in Preferences of NVDA > Input gestures when Firefox or Thunderbird are open.</p>
sayCurrentKeyboardLanguagehttp://addons.nvda-project.org/addons/sayCurrentKeyboardLanguage.hu.html2024-03-26T20:46:20Z2017-07-09T06:29:40Z
<ul>
<li>Author(s): Abdel, Noelia.</li>
</ul>
<h1>Presentation</h1>
<p>This addon was created following a request from a member on the nvda-addons
mailing list.</p>
<p>It provides a script without gesture, which allows to retrieve and give the
language of the current keyboard.</p>
<p>If pressed twice, gives the default language of the system.</p>
<p>At the first version of this module, it had been proposed as simple
globalPlugin to paste in the configuration directory of NVDA, it was then
transformed into addon.</p>
<h2>Notes</h2>
<p>To set a gesture to the script giving the keyboard language, follow these
steps:</p>
<ul>
<li>Open the NVDA's menu, with "NVDA + N";</li>
<li>Go to NVDA's preferences menu;</li>
<li>Then go to the submenu "Input gestures".</li>
<li>Then select the category "Input", and open it with right arrow.</li>
<li>Go to the item labeled "Gives the language of the keyboard in use, if
pressed twice, give the default language of the system";</li>
<li>Once done, press Alt + A to add a gesture, and type "NVDA + F4" or another
gesture of your choice;</li>
<li>This done, press the up arrow once, you hear "your chosen gesture, all
layout";</li>
<li>Validate on enter, then tab to OK then enter;</li>
<li>Your chosen gesture should then call the script giving keyboard language.</li>
</ul>
<h2>Compatibility</h2>
<ul>
<li>This add-on is compatible with the versions of NVDA ranging from 2019.3
and beyond.</li>
</ul>
<h2>Changes for 20240326.0.0</h2>
<ul>
<li>Updated compatibility for nvda-2024.1.;</li>
<li>Deleted download link from readme, the download link for future updates
will now only be available from the add-on store.</li>
</ul>
<h2>Changes for 20231229.0.0</h2>
<ul>
<li>Added a backward compatible implementation to support speak on demand
mode, which will soon be available with nvda-2024.1.</li>
</ul>
<h2>Changes for 20230729.0.0</h2>
<ul>
<li>Applied the flake8 and mypy rules to the code;</li>
<li>Changed the minimum supported NVDA version to 2019.3 to support
annotations introduced in Python 3.</li>
<li>Removed the "NVDA + F4" gesture calling the script giving the keyboard
language., to allow users to choose their preferred gesture.</li>
</ul>
<h2>Changes for version 20230426.0.0 and beyond</h2>
<ul>
<li>Changed version number, minimum NVDA version and download link according
to store conventions/requirements.</li>
</ul>
<h2>Changes for version 19.02</h2>
<ul>
<li>Changed version numbering using YY.MM (The year in 2 digits, followed by a
dot, followed by the month in 2 digits);</li>
<li>Added compatibility with the new versioning format of add-on, appeared
since nvda 2019.1.</li>
</ul>
<h2>Changes for version 1.1</h2>
<ul>
<li>The addon has been renamed from getCurKeyboardLanguage to
sayCurrentKeyboardLanguage;</li>
<li>Added the GPL license to the addon;</li>
<li>Added the script getCurKeyboardLanguage to the "System status" category;</li>
<li>Fixed some errors in the code.</li>
</ul>
<h2>Changes for version 1.0</h2>
<ul>
<li>Initial version.</li>
</ul>
Enhanced Ariahttp://addons.nvda-project.org/addons/enhancedAria.hu.html2023-05-10T20:38:33Z2017-05-21T02:11:59Z
<ul>
<li>Author: Jose Manuel Delicado</li>
<li>Legacy add-on: NVDA 2019.3 and later can read articles on the web</li>
<li>NVDA compatibility: 2017.4 to 2019.2</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=earia">stable version</a></li>
</ul>
<p>This addon allows you to customize which aria landmarks are reported by NVDA
when you browse the Internet.</p>
<p>Its functionality is very simple. Once installed, open your webbrowser and
visit the web as usual. The default aria landmarks reported by Firefox and
Chrome will also be visible in Internet Explorer, so you will be able to
press quick navigation keys to jump between them, and list them by pressing
NVDA+f7 in all browsers. Read the NVDA User Guide for more information.</p>
<p>The addon adds an extra landmark not included by default in NVDA, the
article (abbreviated in Braille as art).</p>
<h2>The configuration dialog</h2>
<p>You can enable or disable landmarks by going to NVDA, preferences, Enhanced
Aria Settings or from the appropriate category in the NVDA options
dialog. The dialog has a checkbox for each landmark. If you disable a
landmark, you won't be able to jump to it pressing the d key when browsing a
webpage, and NVDA won't report it.</p>
<h2>Contact info</h2>
<p>This addon has been developed by Jose Manuel Delicado. If you want to
contact me, send an e-mail to jm.delicado@nvda.es, or open an issue on
GitHub at https://github.com/jmdaweb/enhancedAria</p>
<h2>Changelog</h2>
<h3>Version 2.8</h3>
<ul>
<li>New and updated translations.</li>
<li>Updated NVDA compatibility flags.</li>
</ul>
<h3>Version 2.7</h3>
<ul>
<li>Updated compatibility flags for recent NVDA versions.</li>
<li>New and updated translations.</li>
</ul>
<h3>Version 2.6</h3>
<ul>
<li>Updated compatibility flags for recent NVDA versions. This version is only
compatible with NVDA 2017.4 and above.</li>
<li>New and updated translations.</li>
<li>Now, the configuration is automatically applied after switching NVDA
profiles and restoring settings to factory defaults.</li>
</ul>
<h3>Version 2.5</h3>
<ul>
<li>Updated compatibility flags for recent NVDA versions.</li>
</ul>
<h3>Version 2.4</h3>
<ul>
<li>Now, settings are removed only when the add-on is
uninstalled. Configuration is nolonger reset when upgrading.</li>
<li>New and updated translations.</li>
</ul>
<h3>Version 2.3</h3>
<ul>
<li>Added compatibility with recent NVDA releases.</li>
<li>New translations.</li>
</ul>
<h3>Version 2.2</h3>
<ul>
<li>Fixed a fatal error when a Braille display was used and the article role
was configured to be reported.</li>
</ul>
<h3>Version 2.1</h3>
<ul>
<li>Stability improvements</li>
</ul>
<h3>Version 2.0</h3>
<ul>
<li>Added support for multi-category settings dialog available on NVDA 2018.2
and later</li>
<li>Added Python 3 compatibility</li>
<li>Now guiHelper module is used to create the addon interface</li>
</ul>
<h3>Version 1.3</h3>
<ul>
<li>Added configobj specification for addon settings</li>
</ul>
<h3>Version 1.2</h3>
<ul>
<li>Bugs fixed</li>
</ul>
<h3>Version 1.1</h3>
<ul>
<li>Fixed issues which prevented opening the addon settings dialog when
reverting to NVDA saved configuration</li>
</ul>
Lambda Add-On for NVDAhttp://addons.nvda-project.org/addons/lambda.hu.html2024-02-13T14:36:24Z2017-05-19T19:04:32Z
<ul>
<li>Author: Alberto Zanella and the lambda-nvda team.</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=lambda">stable version</a></li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=lambda-dev">development version</a></li>
</ul>
<p>This project is an appModule for the LAMBDA Software. It has been inspired by the work of Peter Lecky at the Comenius University.
LAMBDA (Linear Access to Mathematic for Braille Device and Audio-synthesis) is a software that helps blind people to read and write math using a braille display and/or a speech synthesizer.
LAMBDA is the result of an EU-Project. For more information about LAMBDA please visit <a href="https://www.lambdaproject.org/">https://www.lambdaproject.org/</a>.<br />
The current version of the addon has braille tables for Italian and Spanish
languages and its interface is available in most of the NVDA's official
languages, because it is translated by the NVDA translations community. If
you are a non-italian user of LAMBDA and you would like to contribute with
the porting of the braille table in your language, feel free to contact the
author (see below) or subscribe the project mailing list.</p>
<p><strong>Please note:</strong> This addon has been developed by Alberto Zanella as a voluntary activity. Nor the author or the contributors are involved in selling and / or development of the software Lambda. If you need more information about Lambda, or you need support on how to use it, please contact your local distributor. If you are encountering any difficulties when using or installing this addon, please contact the author or use the "Issues" link on the Github project page.</p>
<h3><a href="https://github.com/lambda-nvda/lambdaNvda/">Official Github Repository</a></h3>
<h2>Addon Features:</h2>
<h3>Speech support:</h3>
<ul>
<li>Dialogs and menus are properly reported;</li>
<li>Natural speech support for math formulas using the Lambda math engine,
i.e. "compound root 3 sep compound root 3 x plus 24, close compound root,
minus 3 equals 0";</li>
<li>implemented the Reading by character, words, lines and Say All;</li>
<li>Speaks when a block of text is selected or extended (using CTRL+B and
SHIFT+CTRL+B);</li>
<li>Speaks when moving in the text editor using standard Windows commands and
Lambda-specific commands;</li>
<li>Both Extended and Short speech modes are supported (you can select it
using the Tools menu in Lambda);</li>
<li>Special dialogs like structure mode, calculator, and matrix window are now
correctly reported and NVDA reads correctly when moving the cursor around
or when new text is typed ;</li>
<li>Typing echo uses the Lambda text processor, so symbols and markers will be
correctly reported.</li>
</ul>
<h3>Braille support:</h3>
<ul>
<li>The addon installs (inside the user profile directory) and activates a
custom braille table. This table may be different for different
languages. Custom braille tables were made from ones in the Lambda plugin
for JAWS (jbt file). Then symbols and markers are represented using the
same dots patterns;</li>
<li>The addon creates an NVDA profile for a standard braille configuration. By
this, the output is set to the custom braille table only when the Lambda
application is active;</li>
<li>Dialogs and menus are properly reported in braille;</li>
<li>The content of the editor is correctly rendered in braille and the user is
able to move using braille scrolling keys or cursor routing keys;</li>
<li>Starting from the addon version 1.1.0, there are two ways in which the
text in the Lambda editor is rendered: "Flat mode" and "non-Flat
Mode". When the "Flat mode" is on, NVDA will use the Display Model to
retrieve information from the editor and to determine the caret
position. This is specially beneficial when the user needs to move around
on the screen, even in white spaces. When the "Flat Mode" is set to "off",
text rendering on the braille display is more stable, since NVDA uses
Windows API to retrieve it. However when the the caret is moved in white
spaces next to the end of the line of text, the braille display does not
follow the real cursor as long as a non-white space is added by the user.</li>
</ul>
<p>The "flat mode" is active by default. You can toggle "flat mode" on or off
by pressing NVDA+SHIFT+F.</p>
<p>We strongly recommend to disable the Flat Mode if you are using custom DPI
in Windows (Custom sizing option), especially when you have screen settings
with more than 96 dpi (larger than 100%).</p>
<ul>
<li>The structure of dialog boxes is easier, repeated information has been
removed;</li>
<li>The selection will be marked properly using dots 7 and 8, and marking is
properly refreshed while standard Windows commands (SHIFT+ARROWS) or
Lambda specific commands (CTRL+B, CTRL+SHIFT+B) are pressed.</li>
</ul>
<h2>Before starting to use this addon.</h2>
<p>This addon creates an NVDA profile named "lambda" which is associated with
the "lambda.exe" application. The profile automatically sets all braille
options: the custom braille table, the focus tethering and flat mode
settings.</p>
<p>If a previous profile with the same name is present in your system, the
addon will not override it and you have to manually adjust your
configuration profile.</p>
<p>To stave off this situation, if you have specific settings you'd like to
preserve, you can use the "Revert LAMBDA Profile Wizard". The shortcut to
start this tool is NVDA+alt+r (when focused in LAMBDA).</p>
<p>An easy option is also to delete old versions of the "lambda" profile after
the installation of the addon. To do so, open the NVDA menu, select the
"Configuration profiles" menu Item and press ENTER.</p>
<p>In the Configuration profiles dialog, you'll be able to locate and delete
the "lambda" profile. The profile will be re-created the next time the
Lambda application is started.</p>
<p>Deleting the "lambda" profile should be an easy solution also when the addon
runs into any problem. For instance, if the braille table is not properly
set, instead of manually configuring the profile, you can simply delete
it. The addon will create a new one the next time you'll load the Lambda
editor.</p>
<p>Each time the Lambda editor is started, this addon checks if a profile with
the name "lambda" exists. If it doesn't, it automatically generates a
profile with the following form:</p>
<pre><code>filename : userData\profiles\lambda.ini :
[braille]
readByParagraph = False
tetherTo = focus
translationTable = path-to-the-addon-brailleTable-dir\tableName
[lambda]
brailleFlatMode = True
</code></pre>
<p>Where :</p>
<ul>
<li>path-to-the-addon-brailleTable-dir : is the absolute path of the addon
directory + "\brailleTables"</li>
<li>tableName : depends on the active NVDA language. Currently only the
italian and Spanish braille tables, "lambda-ita.utb" and "lambda-esp.utb"
respectively, is present.</li>
</ul>
<h2>Addon Keyboard Shortcuts:</h2>
<ul>
<li><strong>NVDA+Shift+f</strong>: Toggle braille flat mode on or off;</li>
<li><strong>NVDA+alt+r</strong>: Open the "Revert LAMBDA Profile Wizard";</li>
<li><strong>NVDA+d</strong>: Duplicate lines (use this instad of control+d).</li>
</ul>
<h2>Known issues:</h2>
<p>Due to a bug present in LAMBDA, the add-on provides an extra-logic that
reports white spaces. This logic may fail in the following situations:</p>
<ul>
<li>When words like "space", "spazio" "Espacio" etc. are inserted into the
text, they may be reported by NVDA as the local NVDA language translation.</li>
<li>Blank lines are not reported by the LAMBDA speech engine. The user will
hear the translation of the word "space" instead. This could be both a
blank line or a line containing only the word "space".</li>
</ul>
<h2>Useful tips</h2>
<p>This is a set of tips that will help you on using the addon in a more
eficient way.</p>
<ul>
<li>Character-by-character reporting: Normally, when working with maths you
would like NVDA to report things you're writing character by character. To
do this, there are a couple of simple steps: ensure to have the focus on
the LAMBDA's window or one of its variants (the six dots representation,
for example); press NVDA+2 (number two) or navigate to NVDA
menu>Preferences>Keyboard settings and check the box to Speak typed
characters; go to LAMBDA>Options>Voice paramethers and ensure the checkbox
"echo" is ON, otherwhise NVDA won't receive anything from the speech
engine while you are typing. And done, NVDA will speak written characters,
but don't worry, only in LAMBDA or its special windows, the settings for
the rest of applications will be left as they were.</li>
</ul>
<h2>Addon mailing list:</h2>
<p>To report bugs, suggestions or if you want to contribute you can subscribe
the Addon Group (in English). You can subscribe from the website:
<a href="https://groups.io/g/lambda-nvda">https://groups.io/g/lambda-nvda</a>.</p>
<h2>Change log</h2>
<p>Below is a list of changes between the different add-on versions. Next to
the version number, between parentheses, is the development status. The
current development release isn't included as it could have changes until it
is flagged as stable or discarded as candidate.</p>
<h3>Version 1.3.0 (stable)</h3>
<ul>
<li>Support for newer version of NVDA (Support for Python 3)</li>
<li>Solved an issue while pressing duplicate line command NVDA+d in a blank
line caused clipboard content to be pasted. Now when you press NVDA+d and
you are in a blank line, a new blank line appears as expected.</li>
</ul>
<h3>Version 1.2.2 (stable)</h3>
<ul>
<li>Improved compatibility with WX Python version 4 (introduced with NVDA
2018.3). Warning related with wx.NewId() is no longer displayed in debug
log.</li>
<li>Implemented guiHelper to enhance dialogs's appearance.</li>
<li>New languages. Updated translations.</li>
</ul>
<h3>Version 1.2.1a (stable)</h3>
<p>This update is intended to be a long-term support release. It means that
until, at least, june 2018, it won't be released a version as stable as
this. We do it to provide students maximum stability and to minimize the
changes during the academical year.</p>
<ul>
<li>New languages. Updated translations.</li>
</ul>
<h3>Version 1.2.1 (stable)</h3>
<ul>
<li>Added compatibility with the way that NVDA 2017.3 uses to manage
braille. Backwards compatibility kept.</li>
<li>fixed many braille issues.</li>
</ul>
<h3>Version 1.2.0 (development)</h3>
<p>This version was not published as stable because the version 1.2.1 included
major fixes.</p>
<ul>
<li>New locales. Updated localizations.</li>
</ul>
<h3>Version 1.1.8 (stable)</h3>
<ul>
<li>Initial stable release.</li>
</ul>
Speech Historyhttp://addons.nvda-project.org/addons/speech_history.hu.html2024-02-13T14:38:20Z2017-05-16T14:06:26Z
<ul>
<li>Author: James Scholes</li>
<li>Download <a href="https://is.gd/speechHistory2023_1">stable version</a></li>
</ul>
<p>An updated version of the Clip Copy add-on, initially created by Tyler
Spivey. The add-on allows you to review the most recent 100 items spoken by
NVDA, as well as copy the selected item to the clipboard. By default, use
Shift+F11 to move back through the history, Shift+F12 to move forwards and
F12 on its own to copy the selected item. These hotkeys can be updated from
within the Speech category of NVDA's Input gestures dialog.</p>
Speak Passwordshttp://addons.nvda-project.org/addons/speakPasswords.hu.html2023-05-10T20:38:33Z2017-05-03T02:11:11Z
<ul>
<li>Author: Tyler Spivey</li>
<li>NVDA compatibility: 2019.3</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=spp">stable version</a></li>
</ul>
<p>This addon allows NVDA to speak typed characters and words while typing into
password fields. However, navigation in password fields is unchanged.</p>
<h2>Usage</h2>
<p>Passwords are spoken automatically when this addon is installed, controlled
by "Speak typed characters" and "Speak typed words".</p>
<p>To stop passwords from being spoken, disable Speak typed characters/words or
disable/uninstall the add-on.</p>
Clipspeakhttp://addons.nvda-project.org/addons/clipspeak.hu.html2024-02-13T14:37:44Z2017-05-02T03:33:48Z
<h2>Informations</h2>
<ul>
<li>Authors: "Rui Fontes, Ângelo Abrantes, Abel Passos Júnior and colaboration
of Noelia Ruiz Martínez, based on the work of Damien Sykes-Lindley</li>
<li>Updated in 10/04/2022</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=clipspeak">stable version</a></li>
<li>Compatibility: NVDA version 2019.3 and beyond</li>
</ul>
<h2>Presentation</h2>
<p>Clipspeak is an addon that allows NVDA to automatically announce clipboard
operations (such as cut, copy and paste), along with other common editing
operations such as undo and redo.</p>
<p>In order to prevent announcement in inappropriate situations, Clipspeak
performs checks on the control and the clipboard in order to make an
informed decision as to whether such an announcement is necessary.</p>
<p>You can choose between only announcing copy/cut/paste or also whats is being
copied/cutted/pasted on NVDA, configurations, clipspeak.</p>
<p>By default, Clipspeak's gestures are mapped to those commonly used by
English versions of Windows:</p>
<ul>
<li>CTRL+Z: Undo</li>
<li>CTRL+Y: Redo</li>
<li>CTRL+X: Cut</li>
<li>CTRL+C: Copy</li>
<li>CTRL+V: Paste</li>
</ul>
<p>If these are not the shortcuts commonly used for these tasks on your version
of Windows, you will need to remap these gestures in the input gestures
configuration under the Clipboard category.</p>
<h2>Automatic update</h2>
<p>This add-on includes an automatic update feature. The check for a new
version will be executed everytime NVDA is loaded. If you want this, go to
NVDA, Preferences, Options and in the add-on category check the check box.</p>
Review Cursor Copierhttp://addons.nvda-project.org/addons/reviewCursorCopier.hu.html2023-05-10T20:38:33Z2017-04-19T18:32:49Z
<ul>
<li>Author: Tuukka Ojala <a href="mailto:tuukka.ojala@iki.fi">tuukka.ojala@iki.fi</a></li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=reviewCursorCopier">stable version</a></li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=rccp-dev">development version</a></li>
</ul>
<p>This NVDA add-on provides various commands for copying the text under the
review cursor to the clipboard. Currently, the following commands are
implemented:</p>
<ul>
<li>Copy the line under the review cursor</li>
<li>Copy the word under the review cursor</li>
<li>Copy from the start of the current line to the review cursor</li>
<li>Copy from the review cursor to the end of the current line</li>
<li>Copy from the start of the current word to the review cursor</li>
<li>Copy from the review cursor to the end of the current word</li>
</ul>
<p>None of these commands have key bindings by default. Please use the input
gestures dialog located under the NVDA settings menu to set them. All of the
commands provided by this add-on can be found under the "text review"
category. More information about setting and modifying input gestures can be
found in the NVDA user guide.</p>
<h2>License</h2>
<p>This work is licensed under the GNU General Public License, version 2.</p>
Classic Selectionhttp://addons.nvda-project.org/addons/classicSelection.hu.html2023-05-10T20:38:33Z2016-12-24T18:55:43Z
<ul>
<li>Author: Tyler Spivey</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=clsel">stable version</a></li>
</ul>
<p>This addon reverts the behaviour of NVDA+f9 and NVDA+f10 that was introduced
in NVDA 2016.3.</p>
<p>The old behaviour copies the selection to the clipboard on the first press
of NVDA+f10, while the new one selects on the first press and copies on the
second. The new behaviour has some disadvantages. Text can't be copied
without being selected (and thus moving the cursor), where that's
available. For places it's not (example the console), it adds an extra press
of NVDA+f10.</p>
<p>The addon adds two new gestures under the Classic Selection category to
start and end selection, which are bound to NVDA+f9 and NVDA+f10 by default.</p>
Nyílmódokhttp://addons.nvda-project.org/addons/objPad.hu.html2023-05-10T20:38:33Z2016-09-26T17:11:24Z
<ul>
<li>Author: Christopher Duffley <a href="mailto:nvda@chrisduffley.com">nvda@chrisduffley.com</a>, originally by Joseph
Lee, Cleverson Uliana and others</li>
<li><a href="https://www.nvaccess.org/addonStore/legacy?file=objPad">stabil verzió</a> letöltése</li>
<li>NVDA compatibility: 2022.4 and later</li>
</ul>
<p>Ez a bővítmény alternatívát nyújt az NVDA különböző navigációs módjainak
kezelésére. Az NVDA különböző kurzorainak mozgatását mind a nyílbillentyűkre
koncentrálja. Hogy a nyílbillentyűk mikor melyik kurzort, hogy s mint
mozgatják attól függ, hogy a felhasználó egy billentyűparanccsal melyik
navigációs módra vált.</p>
<h2>Parancsok</h2>
<ul>
<li>Ctrl+NVDA+Tab: Vált a nyílbillentyűk kezelésének módjai (a továbbiakban:
nyílmódok) között, lásd alább.</li>
</ul>
<h2>Nyílmódok</h2>
<p>A bővítmény használatával a nyílbillentyűk viselkedése az alábbi módon
változtatható:</p>
<ul>
<li>Normál: a nyílbillentyűk a kurzort mozgatják.</li>
<li>Elemnavigáció: a nyílbillentyűkkel az előző vagy következő elemre, illetve
a szülő- vagy gyermekelemre lehet lépni.</li>
<li>Webmód: a nyílbillentyűkkel lehet váltogatni a webes elemtípusokat és az
egyes elemek közt navigálni.</li>
<li>áttekintőmód: a nyílbillentyűkkel lehet az egyes képernyőelemeken mozogni
a köztük fennálló kapcsolattól függetlenül.</li>
</ul>
<p>Elemnavigációs módban a következő parancsok érhetők el:</p>
<ul>
<li>Jobbnyíl: következő elem.</li>
<li>Balnyíl: előző elem.</li>
<li>Felnyíl: szülőelem.</li>
<li>Lenyíl: az első gyermekelem.</li>
<li>Szóköz vagy enter: elem aktiválása</li>
</ul>
<p>Webmódban elérhető a normál és az elemenkénti navigáció. A választható
elemek: hivatkozás, űrlapmező, címsor, keret, táblázat, lista, jelzőpont.</p>
<ul>
<li>Jobbra nyíl: következő webes elem.</li>
<li>Balra nyíl: előző webes elem.</li>
<li>Felnyíl: előző webes elemtípus.</li>
<li>Lenyíl: következő webes elemtípus.</li>
<li>Szóköz vagy enter: elem aktiválása</li>
</ul>
<p>Áttekintőmód:</p>
<ul>
<li>lenyíl: következő elem vagy következő sor.</li>
<li>felnyíl: előző elem vagy előző sor.</li>
<li>Jobbnyíl: következő karakter.</li>
<li>Balnyíl: előző karakter.</li>
<li>Ctrl+Jobbnyíl: következő szó.</li>
<li>Ctrl+balnyíl: előző szó.</li>
<li>Szóköz vagy enter: elem aktiválása</li>
</ul>
<h2>Version 23.05</h2>
<ul>
<li>To reflect the maintainer change, the manifest has been updated to
indicate as such.</li>
</ul>
<h2>Version 23.02</h2>
<ul>
<li>NVDA 2022.4 or later is required.</li>
<li>Windows 10 21H2 (November 2021 Update/build 19044) or later is required.</li>
</ul>
<h2>Version 23.01</h2>
<ul>
<li>NVDA 2022.3 or later is required.</li>
<li>Windows 10 or later is required as Windows 7, 8, and 8.1 are no longer
supported by Microsoft as of January 2023.</li>
</ul>
<h2>Version 22.06</h2>
<ul>
<li>Requires NVDA 2021.3 or later.</li>
</ul>
<h2>Version 21.04</h2>
<ul>
<li>Requires NVDA 2020.1 or later.</li>
</ul>
<h2>A 20.01 verzió változásai:</h2>
<ul>
<li>Az NVDA 2019.3 vagy újabb kiadására van szükség.</li>
</ul>
<h2>A 18.12 verzió változásai:</h2>
<ul>
<li>Belső változások, hogy a bővítmény kompatibilis legyen a későbbi NVDA
kiadásokkal.</li>
</ul>
<h2>A 18.09 verzió változásai:</h2>
<ul>
<li>Fordításokat adtak hozzá.</li>
<li>Az Enterrel vagy a Numpad billentyűivel lehet az elemeket aktiválni.</li>
</ul>
<h2>A 18.03 verzió változásai:</h2>
<ul>
<li>Jobb együttműködés az NVDA 2018.1 verziójával.</li>
</ul>
<h2>A 16.12 verzió változásai:</h2>
<ul>
<li>Hozzáadták a webmódot.</li>
</ul>
<h2>A 16.10 verzió változásai:</h2>
<ul>
<li>Első stabil verzió.</li>
</ul>
Gyors beszédszintetizátor-váltóhttp://addons.nvda-project.org/addons/switchSynth.hu.html2023-05-10T20:38:33Z2016-07-29T20:06:55Z
<ul>
<li>Írta: Tyler Spivey</li>
<li>Letöltés: <a href="https://www.nvaccess.org/addonStore/legacy?file=switchSynth">1.02-es fejlesztői verzió</a></li>
</ul>
<h1>Gyors beszédszintetizátor-váltó</h1>
<p>Ez a bővítmény lehetővé teszi, hogy billentyűparancsokkal gyorsan váltson
beszédszintetizátort. Figyelem! Ez a bővítmény a korábbi szintetizátorváltó
bővítmény továbbfejlesztése. Ennek a bővítménynek a használata előtt el kell
távolítania a régit. A korábban elmentett szintetizátor-beállítások továbbra
is használhatók.</p>
<p>A bővítmény hat szintetizátorhelyet támogat, melyek alapértelmezésben mind
üresek. A szintetizátorhelyek között a kontroll+shift+NVDA+1-től 6-ig
terjedő billentyűparancsokkal válthat. Ha egy szintetizátorhelyet aktivált,
a beállított szintetizátor a tárolt konfigurációjával együtt betöltődik, ha
létezik. Ha szeretne az adott helyre egy szintetizátort elmenteni, nyomja
meg a kontroll+shift+NVDA+v billentyűparancsot.</p>
Szimbólumok bemondásahttp://addons.nvda-project.org/addons/reportSymbols.hu.html2024-03-10T18:25:01Z2016-07-28T15:07:21Z
<ul>
<li>Author: Noelia Ruiz Martínez.</li>
</ul>
<p>This add-on allows to listen the typed symbols (non alphanumeric or blank
characters), even when the speaking of typed characters is turned off in
NVDA.</p>
<p>Ez a bővítmény a régi "Szimbólumok bemondása" bővítményen alapul, melyet
ugyanez a fejlesztő írt. Kérjük, mielőtt ezt a bővítményt használná,
távolítsa el a régit!</p>
<h2>Beállítások menü</h2>
<ul>
<li>A "szimbólumok bemondása" bővítmény beállításai: lehetővé teszi a
"szimbólumok bemondása" bővítmény beállításainak elvégzését.</li>
</ul>
<p>Megjegyzés: ha ezt a párbeszédpanelt billentyűparanccsal szeretné megnyitni,
hozzáadhat billentyűparancsot az NVDA/beállítások/beviteli parancsok
párbeszédpanelen a konfiguráció kategóriában.</p>
<h2>Changes for 8.0</h2>
<ul>
<li>Compatible with NVDA 2023.1.</li>
</ul>
<h2>Changes for 7.0</h2>
<ul>
<li>Compatible with NVDA 2022.1.</li>
</ul>
<h2>Changes for 6.0</h2>
<ul>
<li>Compatible with NVDA 2021.1.</li>
</ul>
<h2>Changes for 5.0</h2>
<ul>
<li>Requires NVDA 2019.3 or later.</li>
</ul>
<h2>Changes for 4.0</h2>
<ul>
<li>The add-on settings are shown in the corresponding category of the NVDA
Settings dialog.</li>
<li>Requires NVDA 2018.2 or later.</li>
<li>If needed, you can download the <a href="https://www.nvaccess.org/addonStore/legacy?file=rsy-o">last version compatible with NVDA
2017.3</a>.</li>
</ul>
<h2>Changes for 3.0</h2>
<ul>
<li>Added checkboxes for the speaking of spaces, carriage returns and other
blank characters.</li>
</ul>
<h2>Changes for 2.0</h2>
<ul>
<li>The visual presentation of the dialog has been enhanced, adhering to the
appearance of the dialogs shown in NVDA.</li>
<li>Requires NVDA 2016.4 or later.</li>
</ul>
<h2>Az 1.0. verzió változásai</h2>
<ul>
<li>Első verzió.</li>
</ul>
StationPlaylisthttp://addons.nvda-project.org/addons/stationPlaylist.hu.html2024-03-20T16:04:11Z2016-07-26T17:42:18Z
<ul>
<li>Authors: Christopher Duffley <a href="mailto:nvda@chrisduffley.com">nvda@chrisduffley.com</a> (formerly Joseph Lee
<a href="mailto:joseph.lee22590@gmail.com">joseph.lee22590@gmail.com</a>, originally by Geoff Shang and other
contributors)</li>
<li>Letöltés <a href="https://www.nvaccess.org/addonStore/legacy?file=stationPlaylist">Stabil verzió</a></li>
<li>NVDA compatibility: 2023.3.3 and later</li>
</ul>
<p>This add-on package provides improved usage of StationPlaylist Studio and
other StationPlaylist apps, as well as providing utilities to control Studio
from anywhere. Supported apps include Studio, Creator, Track Tool, VT
Recorder, and Streamer, as well as SAM, SPL, and AltaCast encoders.</p>
<p>For more information about the add-on, read the <a href="https://github.com/chrisDuffley/stationplaylist/wiki/SPLAddonGuide">add-on guide</a>.</p>
<p>IMPORTANT NOTES:</p>
<ul>
<li>This add-on requires StationPlaylist suite 5.40 or later.</li>
<li>Some add-on features will be disabled or limited if NVDA is running in
secure mode such as in logon screen.</li>
<li>For best experience, disable audio ducking mode.</li>
<li>Starting from 2018, <a href="https://github.com/ChrisDuffley/stationplaylist/wiki/splchangelog">changelogs for old add-on releases</a> will be found
on GitHub. This add-on readme will list changes from version 23.02 (2023)
onwards.</li>
<li>While Studio is running, you can save, reload saved settings, or reset
add-on settings to defaults by pressing Control+NVDA+C, Control+NVDA+R
once, or Control+NVDA+R three times, respectively. This is also applicable
to encoder settings - you can save and reset (not reload) encoder settings
if using encoders.</li>
<li>Many commands will provide speech output while NVDA is in speak on demand
mode (NVDA 2024.1 and later).</li>
</ul>
<h2>Gyorsbillentyűk</h2>
<p>Most of these will work in Studio only unless otherwise specified. Unless
noted otherwise, these commands support speak on demand mode.</p>
<ul>
<li>Alt+Shift+T from Studio window: announce elapsed time for the currently
playing track.</li>
<li>Control+Alt+T (two finger flick down in SPL touch mode) from Studio
window: announce remaining time for the currently playing track.</li>
<li>NVDA+Shift+F12 (two finger flick up in SPL touch mode) from Studio window:
announces broadcaster time such as 5 minutes to top of the hour. Pressing
this command twice will announce minutes and seconds till top of the hour.</li>
<li>Alt+NVDA+1 (two finger flick right in SPL mode) from Studio window: Opens
alarms category in Studio add-on configuration dialog (does not support
speak on demand).</li>
<li>Alt+NVDA+1 from Creator's Playlist Editor and Remote VT playlist editor:
Announces scheduled time for the loaded playlist.</li>
<li>Alt+NVDA+2 from Creator's Playlist Editor and Remote VT playlist editor:
Announces total playlist duration.</li>
<li>Alt+NVDA+3 from Studio window: Toggles cart explorer to learn cart
assignments (does not support speak on demand).</li>
<li>Alt+NVDA+3 from Creator's Playlist Editor and Remote VT playlist editor:
Announces when the selected track is scheduled to play.</li>
<li>Alt+NVDA+4 from Creator's Playlist Editor and Remote VT playlist editor:
Announces rotation and category associated with the loaded playlist.</li>
<li>Control+NVDA+f from Studio window: Opens a dialog to find a track based on
artist or song name. Press NVDA+F3 to find forward or NVDA+Shift+F3 to
find backward (does not support speak on demand).</li>
<li>Alt+NVDA+R from Studio window: Steps through library scan announcement
settings (does not support speak on demand).</li>
<li>Control+Shift+X from Studio window: Steps through braille timer settings
(does not support speak on demand).</li>
<li>Control+Alt+left/right arrow (while focused on a track in Studio, Creator,
Remote VT, and Track Tool): Move to previous/next track column (does not
support speak on demand).</li>
<li>Control+Alt+up/down arrow (while focused on a track in Studio, Creator,
Remote VT, and Track Tool): Move to previous/next track and announce
specific columns (does not support speak on demand).</li>
<li>Control+NVDA+1 through 0 (while focused on a track in Studio, Creator
(including Playlist Editor), Remote VT, and Track Tool): Announce column
content for a specified column (first ten columns by default). Pressing
this command twice will display column information on a browse mode
window.</li>
<li>Control+NVDA+- (hyphen while focused on a track in Studio, Creator, Remote
VT, and Track Tool): display data for all columns in a track on a browse
mode window (does not support speak on demand).</li>
<li>NVDA+V while focused on a track (Studio's playlist viewer only): toggles
track column announcement between screen order and custom order (does not
support speak on demand).</li>
<li>Alt+NVDA+C while focused on a track (Studio's playlist viewer only):
announces track comments if any.</li>
<li>Alt+NVDA+0 from Studio window: Opens the Studio add-on configuration
dialog (does not support speak on demand).</li>
<li>Alt+NVDA+P from Studio window: Opens the Studio broadcast profiles dialog
(does not support speak on demand).</li>
<li>Alt+NVDA+F1: Open welcome dialog (does not support speak on demand).</li>
</ul>
<h2>Nem hozzárendelt parancsok</h2>
<p>The following commands are not assigned by default; if you wish to assign
them, use Input Gestures dialog to add custom commands. To do so, from
Studio window, open NVDA menu, Preferences, then Input Gestures. Expand
StationPlaylist category, then locate unassigned commands from the list
below and select "Add", then type the gesture you wish to use.</p>
<p>Important: some of these commands will not work if NVDA is running in secure
mode such as from login screen. Not all commands support speak on demand.</p>
<ul>
<li>Switching to SPL Studio window from any program (unavailable in secure
mode, does not support speak on demand).</li>
<li>SPL Controller layer (unavailable in secure mode).</li>
<li>Announcing Studio status such as track playback from other programs
(unavailable in secure mode).</li>
<li>Announcing encoder connection status from any program (unavailable in
secure mode).</li>
<li>SPL segédréteg az SPL Studio-ból.</li>
<li>Másodpercre pontosan bejelenti az időt az SPL Studioból.</li>
<li>Hőmérséklet bejelentése.</li>
<li>A következő zeneszám címének bemondása, amennyiben van ilyen.</li>
<li>Announcing title of the currently playing track.</li>
<li>Marking current track for start of track time analysis.</li>
<li>Performing track time analysis.</li>
<li>Take playlist snapshots.</li>
<li>Find text in specific columns (does not support speak on demand).</li>
<li>Find tracks with duration that falls within a given range via time range
finder (does not support speak on demand).</li>
<li>Quickly enable or disable metadata streaming (does not support speak on
demand).</li>
</ul>
<h2>Additional commands when using encoders</h2>
<p>The following commands are available when using encoders, and the ones used
for toggling options for on-connection behavior such as focusing to Studio,
playing the first track, and toggling of background monitoring can be
assigned through the Input Gestures dialog in NVDA menu, Preferences, Input
Gestures, under the StationPlaylist category. These commands do not support
speak on demand.</p>
<ul>
<li>F9: connect the selected encoder.</li>
<li>F10 (SAM encoder only): Disconnect the selected encoder.</li>
<li>Control+F9: Connect all encoders.</li>
<li>Control+F10 (SAM encoder only): Disconnect all encoders.</li>
<li>Control+Shift+F11: Toggles whether NVDA will switch to Studio window for
the selected encoder if connected.</li>
<li>Shift+F11: A Studio elkezdi lejátszani az első kijelölt dalt, amennyiben
az encoder egy Streaming szerverhez kapcsolódik.</li>
<li>Control+F11: A kiválasztott encoder ellenőrzése a háttérben.</li>
<li>Control+F12: opens a dialog to select the encoder you have deleted (to
realign encoder labels and settings).</li>
<li>Alt+NVDA+0 or F12: Opens encoder settings dialog to configure options such
as encoder label.</li>
</ul>
<p>In addition, column review commands are available, including (supports speak
on demand):</p>
<ul>
<li>Control+NVDA+1: Encoder position.</li>
<li>Control+NVDA+2: encoder label.</li>
<li>Control+NVDA+3 from SAM Encoder: Encoder format.</li>
<li>Control+NVDA+3 from SPL and AltaCast Encoder: Encoder settings.</li>
<li>Control+NVDA+4 from SAM Encoder: Encoder connection status.</li>
<li>Control+NVDA+4 from SPL and AltaCast Encoder: Transfer rate or connection
status.</li>
<li>Control+NVDA+5 from SAM Encoder: Connection status description.</li>
</ul>
<h2>SPL segédréteg</h2>
<p>This layer command set allows you to obtain various status on SPL Studio,
such as whether a track is playing, total duration of all tracks for the
hour and so on. From any SPL Studio window, press the SPL Assistant layer
command, then press one of the keys from the list below (one or more
commands are exclusive to playlist viewer). You can also configure NVDA to
emulate commands from other screen readers.</p>
<p>The available commands are (most commands support speak on demand):</p>
<ul>
<li>A: Automatikus lejátszás.</li>
<li>C (Shift+C in JAWS layout): Title for the currently playing track.</li>
<li>C (JAWS layout): Toggle cart explorer (playlist viewer only, does not
support speak on demand).</li>
<li>D (R in JAWS layout): Remaining duration for the playlist (if an error
message is given, move to playlist viewer and then issue this command).</li>
<li>E: Metadata streaming status.</li>
<li>Shift+1 through Shift+4, Shift+0: Status for individual metadata streaming
URL's (0 is for DSP encoder).</li>
<li>F: Find track (playlist viewer only, does not support speak on demand).</li>
<li>H: A dal hossza az aktuális órában.</li>
<li>Shift+H: Remaining track duration for the hour slot.</li>
<li>I (L in JAWS layout): Listener count.</li>
<li>K: Move to the marked track (playlist viewer only).</li>
<li>Control+K: Set the current track as the place marker track (playlist
viewer only).</li>
<li>L (Shift+L in JAWS layout): Line in.</li>
<li>M: Mikrofon.</li>
<li>N: A soron következő dal címe.</li>
<li>P: A lejátszás állapota, (lejátszás alatt, vagy leállítva).</li>
<li>Shift+P: Pitch of the current track.</li>
<li>R (Shift+E in JAWS layout): Record to file enabled/disabled.</li>
<li>Shift+R: A folyamatban lévő gyűjtemény-átvizsgálás követése.</li>
<li>S: Track starts (scheduled).</li>
<li>Shift+S: Time until selected track will play (track starts in).</li>
<li>T: Cart edit/insert mode on/off.</li>
<li>U: A Studio futási ideje.</li>
<li>W: Időjárás és hőmérséklet, amennyiben be van állítva.</li>
<li>Y: Playlist modified status.</li>
<li>F8: Take playlist snapshots (number of tracks, longest track, etc.).</li>
<li>Shift+F8: Request playlist transcripts in numerous formats.</li>
<li>F9: Mark current track for start of playlist analysis (playlist viewer
only).</li>
<li>F10: Perform track time analysis (playlist viewer only).</li>
<li>F12: Switch between current and a predefined profile.</li>
<li>F1: Súgó</li>
</ul>
<h2>SPL Vezérlő</h2>
<p>Ez a parancsréteg az SPL Studio bárhonnani vezérlését teszi lehetővé. Nyomja
le az SPL vezérlőréteg parancsát, ekkor az NVDA bemondja: "SPL
Vezérlőréteg." Használjon további parancsokat a Studio egyéb beállításainak
megadásához, mint a mikrofon be- és kikapcsolása, vagy a következő dalra
ugrás.</p>
<p>Important: SPL Controller layer commands are disabled if NVDA is running in
secure mode.</p>
<p>The available SPL Controller commands are (some commands support speak on
demand):</p>
<ul>
<li>P: Play the next selected track.</li>
<li>U: Pause or unpause playback.</li>
<li>S: Stop the track with fade out.</li>
<li>T: Instant stop.</li>
<li>M: Turn on microphone.</li>
<li>Shift+M: Turn off microphone.</li>
<li>A: Turn on automation.</li>
<li>Shift+A: Turn off automation.</li>
<li>L: Turn on line-in input.</li>
<li>Shift+L: Turn off line-in input.</li>
<li>R: Remaining time for the currently playing track.</li>
<li>Shift+R: Library scan progress.</li>
<li>C: Title and duration of the currently playing track (supports speak on
demand).</li>
<li>Shift+C: Title and duration of the upcoming track if any (supports speak
on demand).</li>
<li>E: Encoder connection status (supports speak on demand).</li>
<li>I: Listener count (supports speak on demand).</li>
<li>Q: Studio status information such as whether a track is playing,
microphone is on and others (supports speak on demand).</li>
<li>Cart keys (F1, Control+1, for example): Play assigned carts from anywhere.</li>
<li>H: Layer help.</li>
</ul>
<h2>Track and microphone alarms</h2>
<p>By default, NVDA will play a beep if five seconds are left in the track
(outro) and/or intro, as well as to hear a beep if microphone has been
active for a while. To configure track and microphone alarms, press
Alt+NVDA+1 to open alarms settings in Studio add-on settings screen. You can
also use this screen to configure if you'll hear a beep, a message or both
when alarms are turned on.</p>
<h2>Dalkereső</h2>
<p>If you wish to quickly find a song by an artist or by song name, from track
list, press Control+NVDA+F. Type or choose the name of the artist or the
song name. NVDA will either place you at the song if found or will display
an error if it cannot find the song you're looking for. To find a previously
entered song or artist, press NVDA+F3 or NVDA+Shift+F3 to find forward or
backward.</p>
<p>Megjegyzés: a Dalkereső figyelembe veszi a kis- és nagybetűket.</p>
<h2>Cart Explorer</h2>
<p>A verzió függvényében az SPL Studio 96 cart hozzárendelését teszi lehetővé a
lejátszáshoz. Az NVDA segítségével hallható hogy milyen cart vagy csengés
van hozzárendelve ezekhez a parancsokhoz.</p>
<p>To learn cart assignments, from SPL Studio, press Alt+NVDA+3. Pressing the
cart command once will tell you which jingle is assigned to the
command. Pressing the cart command twice will play the jingle. Press
Alt+NVDA+3 to exit cart explorer. See the add-on guide for more information
on cart explorer.</p>
<h2>Track time analysis</h2>
<p>To obtain length to play selected tracks, mark current track for start of
track time analysis (SPL Assistant, F9), then press SPL Assistant, F10 when
reaching end of selection.</p>
<h2>Columns Explorer</h2>
<p>By pressing Control+NVDA+1 through 0, you can obtain contents of specific
columns. By default, these are first ten columns for a track item (in
Studio: artist, title, duration, intro, outro, category, year, album, genre,
mood). For playlist editor in Creator and Remote VT client, column data
depends on column order as shown on screen. In Studio, Creator's main track
list, and Track Tool, column slots are preset regardless of column order on
screen and can be configured from add-on settings dialog under columns
explorer category.</p>
<h2>Track column announcement</h2>
<p>You can ask NVDA to announce track columns found in Studio's playlist viewer
in the order it appears on screen or using a custom order and/or exclude
certain columns. Press NVDA+V to toggle this behavior while focused on a
track in Studio's playlist viewer. To customize column inclusion and order,
from column announcement settings panel in add-on settings, uncheck
"Announce columns in the order shown on screen" and then customize included
columns and/or column order.</p>
<h2>Playlist snapshots</h2>
<p>You can press SPL Assistant, F8 while focused on a playlist in Studio to
obtain various statistics about a playlist, including number of tracks in
the playlist, longest track, top artists and so on. After assigning a custom
command for this feature, pressing the custom command twice will cause NVDA
to present playlist snapshot information as a webpage so you can use browse
mode to navigate (press escape to close).</p>
<h2>Playlist Transcripts</h2>
<p>Pressing SPL Assistant, Shift+F8 will present a dialog to let you request
playlist transcripts in numerous formats, including in a plain text format,
an HTML table or a list.</p>
<h2>Beállítások párbeszédpanel</h2>
<p>From studio window, you can press Alt+NVDA+0 to open the add-on
configuration dialog. Alternatively, go to NVDA's preferences menu and
select SPL Studio Settings item. Not all settings are available if NVDA is
running in secure mode.</p>
<h2>Broadcast profiles dialog</h2>
<p>You can save settings for specific shows into broadcast profiles. These
profiles can be managed via SPL broadcast profiles dialog which can be
accessed by pressing Alt+NVDA+P from Studio window.</p>
<h2>SPL érintőmód</h2>
<p>If you are using Studio on a touchscreen computer with NVDA installed, you
can perform some Studio commands from the touchscreen. First use three
finger tap to switch to SPL mode, then use the touch commands listed above
to perform commands.</p>
<h2>Version 24.03</h2>
<ul>
<li>Compatible with NVDA 2024.1.</li>
<li>NVDA 2023.3.3 or later is required.</li>
<li>Support for StationPlaylist suite 6.10.</li>
<li>Most commands support speak on demand (NVDA 2024.1) so announcements can
be spoken in this mode.</li>
</ul>
<h2>Version 24.01</h2>
<ul>
<li>The commands for the Encoder Settings dialog for use with the SPL and SAM
Encoders are now assignable, meaning that you can change them from their
defaults under the StationPlaylist category in NVDA Menu > Preferences >
Input Gestures. The ones that are not assignable are the connect and
disconnect commands. Also, to prevent command conflicts and make much
easier use of this command on remote servers, the default gesture for
switching to Studio after connecting is now Control+Shift+F11 (previously
just F11). All of these can of course still be toggled from the Encoder
Settings dialog (NVDA+Alt+0 or F12).</li>
</ul>
<h2>Version 23.05</h2>
<ul>
<li>To reflect the maintainer change, the manifest has been updated to
indicate as such.</li>
</ul>
<h2>Version 23.02</h2>
<ul>
<li>NVDA 2022.4 or later is required.</li>
<li>Windows 10 21H2 (November 2021 Update/build 19044) or later is required.</li>
<li>In Studio's playlist viewer, NVDA will not announce column headers such as
artist and title if table headers setting is set to either "rows and
columns" or "columns" in NVDA's document formatting settings panel.</li>
</ul>
<h2>Older releases</h2>
<p>Please see the <a href="https://github.com/ChrisDuffley/stationplaylist/wiki/splchangelog">changelog</a> for release notes for old add-on releases.</p>
Hangmesterhttp://addons.nvda-project.org/addons/toneMaster.hu.html2024-02-13T14:37:33Z2016-07-17T23:17:46Z
<ul>
<li>Authors: Hrvoje Katić</li>
<li>Letöltés <a href="https://addons.nvda-project.org/files/get.php?file=tmast">stabil verzió</a></li>
<li>NVDA compatibility: 2019.3 and later</li>
</ul>
<p>Üdvözlöm a hangmesterben! Ezt a kis NVDA-bővítményt viccből írtam, és
megosztom Önnel, hogy egy kicsit jobb kedvre derítsem, míg használja.</p>
<p>Mindig szerettem volna zenei hangokat készíteni az NVDA-val ahelyett, hogy a
folyamatjelzője vagy hibajelzése hangjait hallgatnám. Ezeket azonban nem
könnyű megalkotni, így először lehetővé szerettem volna tenni, hogy
könnyebben lehessen dallamokat készíteni. Ezért írtam meg a
hangmestert. Most képzelje el, milyen lenne, ha az NVDA Mozartot, Beethovent
vagy mondjuk a Rolling Stones egy nagy slágerét játszaná. Bár az
elkészített dallamok úgy szólnak, mint a régi mobilokon, ez még így is
vicces.</p>
<p>A hangmester leegyszerűsíti a hangfájlok elkészítését. Ehhez használja
kedvenc szövegszerkesztőjét, majd mentse el a fájlt és játssza le az
NVDA-val. Olvassa el ehhez a további tudnivalókat!</p>
<h2>A hangadat-fájlok</h2>
<p>Ahhoz, hogy lejátssza első dallamát a hangmesterrel, először meg kell
alkotnia és be kell töltenie hangadat-fájlját. A hangadat-fájlok egyszerű
szöveges fájlok .tdf kiterjesztéssel. A hangmester ezeket a fájlokat
használja a dallam előállítására és lejátszására. Ahhoz, hogy a hangmester
megfelelően lejátssza az alkotott dallamot, tartsa be az alábbi egyszerű
szabályokat!</p>
<dl>
<dt>1. A tdf fájl minden sorának <em>három</em> paramétert kell tartalmaznia, melyeket</dt>
<dd>(kettős pont9 választ el. Az első paraméter a hangmagasság, a második a
hang hossza, a harmadik pedig a szünet hossza két hang között. Mind a
három paramétert meg kell adni, különben a hangmester nem tudja
lejátszani a hangadatokat.</dd>
</dl>
<ol>
<li>A hangmagasságnak és a hang hosszának egész számnak kell lennie, a szünet
pedig lebegőpontos valós érték legyen.</li>
<li>Ha a sor elejére # (kettős kereszt) kerül, a hangmester a sort
megjegyzésnek tekinti és figyelmen kívül hagyja.</li>
</ol>
<p>Példa: játsszunk le egy háromhangos dallamot!</p>
<p>1500:100:0.5</p>
<p>1000:100:0.09</p>
<p>500:100:0.7</p>
<p>Ebben a példában az első hang a sorban 1500-as hangmagasságú, a hossza 100
és 0.5 a szünet. A második hang magassága 1000, hossza 100 és a szünet
0.09. Az utolsó hang hangmagassága a sorban 500, hossza 100 és a szünet 0.7.</p>
<p>Megjegyzés: A szünetet kötelező minden hangnál megadni, különben az egyik
hang rátorlódik a másikra és ez váratlan eredményekhez vezet. Ezért kötelező
ez a paraméter.</p>
<p>Ha szeretné tanulmányozni a hangkészítés szabályait, kérem, tekintse meg és
szerkessze át a bővítményhez mellékelt példafájlt. A fájlt a "tones"
almappában találja, ide kell tennie a saját .tdf fájljait is.</p>
<h2>Billentyűparancsok</h2>
<ul>
<li>Alt+NVDA+T: Lejátssza a betöltött hangfájlt, ha minden rendben.</li>
<li>Alt+Shift+NVDA+T: ha szól egy dallam, megálítja a lejátszást.</li>
<li>Alt+NVDA+N: Készít és megnyit egy üres hangadat-fájlt a jegyzettömbben
szerkesztés céljából.</li>
<li>Alt+NVDA+L: Megnyit egy párbeszédpanelt, hogy megnyithassunk egy
hangadat-fájlt lejátszásra.</li>
<li>Alt+NVDA+E: Megnyitja a betöltött fájlt jegyzettömbben szerkesztésre.</li>
<li>Alt+NVDA+O: Megnyit egy mappát, melyben hangadat-fájlok vannak, és ahová a
hangadatokat menteni lehet a hangmesterrel.</li>
</ul>
<h2>Egyéb megjegyzések</h2>
<p>Hangadat-fájlokat készíteni, szerkeszteni és betölteni vagy hangadat-mappát
megnyitni, melyben ilyen fájlok vannak, az NVDA/eszközök/hangmester menüben
is lehet.</p>
<p>Ha az új hangadat-fájl készítése párbeszédpanel megnyílik, írjon be egy
nevet .tdf kiterjesztés nélkül. A kiterjesztést a hangmester automatikusan
hozzáadja a fájlnévhez. Ha nem ad meg fájlnevet, a hangmester az
alapértelmezés szerinti "untitled.tdf" fájlnevet használja. A hangmester az
új fájlt automatikusan létrehozza és megnyitja a jegyzettömbben
szerkesztésre. Nyomjon escape-et a fájlnév bekérésekor, ha mégsem szeretne
új fájlt készíteni.</p>
<p>Megjegyzés: A hangmester a jegyzettömböt használja szerkesztésre, mert ez a
Windows tartozéka, és minden számítógépen megtalálható.</p>
<p>Ha a hangadatok betöltése párbeszédpanel nyitva van, használja a nyilakat a
betöltendő fájl kiválasztására, majd nyomjon entert. Nyomjon escape-et a
betöltés mellőzéséhez.</p>
<p>Ha megnyit egy mappát, mely tdf fájlokat tartalmaz, a megtekintésüket és
szerkesztésüket a szövegszerkesztővel végezheti. Ha azonnal szeretné hallani
az eredményt, erősen ajánlom, hogy először töltse be a fájlt a hangmesterbe,
ha lehetséges. Ezt követően szerkesztheti a fájlt, mentse el az eredményt,
majd minden mentés után használhatja a lejátszás parancsot az utolsó
eredmény meghallgatásához.</p>
<h2>Changes for 1.3</h2>
<ul>
<li>Fixed: Fixed compatibility issue with newer NVDA versions.</li>
</ul>
<h2>Az 1.2. verzió változásai</h2>
<ul>
<li>Javítás: egy nagyobb címzési hiba, ahol egy üres hangadat-fájl választása
után egy másik választásakor annak lejátszása meghiúsult.</li>
</ul>
<h2>Az 1.1. verzió változásai</h2>
<ul>
<li>Hozzáadva egy új opció, mellyel új hangfájlt lehet készíteni és megnyitni
szerkesztésre a jegyzettömbben.</li>
<li>Hozzáadva egy opció, mellyel a jelenleg betöltött hangfájlt lehet
szerkeszteni a jegyzettömbben.</li>
<li>Fejlesztés: a hibaüzenetek felhasználóbarátabbá váltak.</li>
<li>Fejlesztés: a bővítmény bizonyos funkciói, például a hangfájlok mappájának
megnyitása vagy a hangfájlok szerkesztése jegyzettömbben tiltva lettek a
biztonsági képernyőkön.</li>
<li>Fejlesztés: Az NVDA tájékoztatja a felhasználót, ha a lejátszás leáll.</li>
<li>Javítás: ha egy hangfájl lejátszása folyamatban van, már nem lehet egy
másikat is elindítani.</li>
</ul>
<h2>Az 1.0. verzió változásai</h2>
<ul>
<li>Eredeti kiadás.</li>
</ul>
mp3DirectCuthttp://addons.nvda-project.org/addons/mp3DirectCut.hu.html2024-03-26T20:46:22Z2016-07-15T19:59:20Z
<ul>
<li>Author(s) : Abdel, Rémy, Abdellah zineddine, Jean-François COLAS.</li>
</ul>
<h1>Presentation</h1>
<p>Ez a kiegészítő javítja az Mp3 direct cut szoftverhez történő hozzáférést az
NVDA-val.</p>
<p>It has been tested with versions of mp3DirectCut ranging from 212 up to 223.</p>
<h2>Billentyűparancsok</h2>
<p>This addon offers the following commands:</p>
<ul>
<li><p>B</p>
<ul>
<li>Used to confirm correct placement of the marker of the beginning of
the selection B.</li>
</ul>
</li>
<li><p>Ctrl+Shift+B</p>
<ul>
<li>Used to indicate the position of the marker of the beginning of
selection B.</li>
<li>Double pressure lets give you the duration of the selection.</li>
</ul>
</li>
<li><p>Ctrl+Shift+D</p>
<ul>
<li>Gives the duration from the beginning of the file to the current
position of the playback cursor.</li>
<li>Double pressure lets give you the total duration.</li>
</ul>
</li>
<li><p>Ctrl+R</p>
<ul>
<li>Confirms that the selection has been canceled.</li>
</ul>
</li>
<li><p>Ctrl+Shift+R</p>
<ul>
<li>Gives the time remaining from the current position of the playback
cursor to the end of the file.</li>
</ul>
</li>
<li><p>Ctrl+Shift+E</p>
<ul>
<li>Used to indicate the position of the marker of the end of selection N.</li>
<li>Double pressure gives recapitulatif positions B and N, and the
duration of the selection.</li>
</ul>
</li>
<li><p>Ctrl+Shift+P</p>
<ul>
<li>Give the reference of the actual part and the total number of parts in
the current file.</li>
</ul>
</li>
<li><p>Ctrl+Shift+Space</p>
<ul>
<li>Used to determine the current level of the vu-meter, during recording.</li>
<li>Double pressure reset it.</li>
</ul>
</li>
<li><p>Down Arrow</p>
<ul>
<li>Lets you see the current position of the playhead.</li>
<li>This command also position the cursor at the location of the marker of
the end of selection N, while giving the location of this marker if a
selection has been made.</li>
<li>In the volume dialog box, vocalise the next value that can be reached
generally with downArrow.</li>
<li>This value is not vocalized default.</li>
</ul>
</li>
<li><p>End</p>
<ul>
<li>Moves the playback cursor at the end of the current file and give the
total time.</li>
</ul>
</li>
<li><p>Home</p>
<ul>
<li>Moves the playback cursor at the beginning of the current file.</li>
</ul>
</li>
<li><p>Left Arrow</p>
<ul>
<li>Lets make a brief return back of one second during playback, while
giving the current duration.</li>
<li>This duration is configurable in the options of mp3directcut.</li>
</ul>
</li>
<li><p>N</p>
<ul>
<li>Used to confirm correct placement of the marker of the end of the
selection N.</li>
</ul>
</li>
<li><p>Page Down</p>
<ul>
<li>Lets make a leap forward of 10 seconds during playback, while giving
the current duration.</li>
<li>This duration is configurable in the options of mp3directcut.</li>
</ul>
</li>
<li><p>Page Up</p>
<ul>
<li>Lets make a return back of 10 seconds during playback, while giving
the current duration.</li>
<li>This duration is configurable in the options of mp3directcut.</li>
</ul>
</li>
<li><p>R</p>
<ul>
<li>Allows to prepare a record and whether you can press spacebar to
start.</li>
</ul>
</li>
<li><p>Right Arrow</p>
<ul>
<li>Lets do a brief forward of one second during playback, while giving
the current duration.</li>
<li>This duration is configurable in the options of mp3directcut.</li>
</ul>
</li>
<li><p>Ctrl+Right Arrow</p>
<ul>
<li>Moves to the next splitting point, while giving the current duration.</li>
</ul>
</li>
<li><p>Ctrl+Left Arrow</p>
<ul>
<li>Moves to the previous splitting point, while giving the current
duration.</li>
</ul>
</li>
<li><p>Shift+Right Arrow</p>
<ul>
<li>Lets do a brief forward of four hundredths of seconds during playback,
while giving the current duration.</li>
</ul>
</li>
<li><p>Shift+Left Arrow</p>
<ul>
<li>Lets do a brief backwards of four hundredths of seconds during
playback, while giving the current duration.</li>
</ul>
</li>
<li><p>S</p>
<ul>
<li>Used to stop the reading and give the current duration.</li>
</ul>
</li>
<li><p>Space</p>
<ul>
<li>If the recording is ready, start this recording.</li>
<li>If a recording is in progress, stop it by positioning the cursor at
the beginning.</li>
<li>If a file is loaded, start the reading.</li>
<li>If a read is in progress, allows to do a pause by giving current
duration.</li>
<li>If read is paused, allows to restart the reading from the current
location.</li>
</ul>
</li>
<li><p>Up Arrow</p>
<ul>
<li>Lets you see the current position of the playhead.</li>
<li>This command also position the cursor at the location of the marker of
the beginning of selection B, while giving the location of this marker
if a selection has been made.</li>
<li>In the volume dialog box, vocalise the previous value that can be
reached generally with upArrow.</li>
<li>This value is not vocalized default.</li>
</ul>
</li>
<li><p>NVDA+H</p>
<ul>
<li>Lets open the help of the current add-on.</li>
</ul>
</li>
</ul>
<h2>Compatibility</h2>
<ul>
<li>This add-on is compatible with the versions of NVDA ranging from 2019.3
and beyond.</li>
</ul>
<h2>Changes for 20240327.0.0</h2>
<ul>
<li>Fixed a bug that caused a log error when reloading plugins, thanks to Rob,
from nvda-addons mailing list;</li>
</ul>
<h2>Changes for 20240326.0.0</h2>
<ul>
<li>Updated compatibility for nvda-2024.1.;</li>
<li>Deleted download link from readme, the download link for future updates
will now only be available from the add-on store.</li>
</ul>
<h2>Changes for 20231229.0.0</h2>
<ul>
<li>Added a backward compatible implementation to support speak on demand
mode, which will soon be available with nvda-2024.1.</li>
</ul>
<h2>Changes for 20231007.0.0</h2>
<ul>
<li>After placing the cutting points and after opening the cutting properties
window, with "Ctrl+N", adding accessibility to the title of this window by
indicating the part index.</li>
<li>In reading mode, after moving the start or end markers of selections with
keys 1 to 6 of the alphanumeric pad, addition of automatic start of
reading from the new position;</li>
<li>Fixed a bug that occurred when consulting the remaining time with
"control+shift+r" from the beginning of the track.</li>
</ul>
<h2>Changes for 20230728.0.0</h2>
<ul>
<li>Applied the flake8 and mypy rules to the code;</li>
<li>Changed the minimum supported NVDA version to 2019.3 to support
annotations introduced in Python 3.</li>
</ul>
<h2>Changes for 20230508.0.0 and beyond</h2>
<ul>
<li>Changed version number, minimum NVDA version and download link according
to store conventions/requirements.</li>
</ul>
<h2>Change for version 20.12</h2>
<ul>
<li>Stop speech during recording and reading for the latest versions of
mp3directcut;</li>
<li>Fixed reading remaining time for new versions of NVDA using Python 3.</li>
</ul>
<h2>Change for version 19.02</h2>
<ul>
<li>Added the add-on's configuration in the settings panel available since
nvda 2018.2;</li>
<li>Changed version numbering using YY.MM (The year in 2 digits, followed by a
dot, followed by the month in 2 digits);</li>
<li>Added compatibility with the new versioning format of add-on, appeared
since nvda 2019.1.</li>
</ul>
<h2>Change for version 4.0</h2>
<ul>
<li>Added the Compatibility of the add-on with both Python 2.7 and 3;</li>
<li>Fixed a bug with add-on paths that contain non-ASCII characters.</li>
</ul>
<h2>Change for version 3.0</h2>
<ul>
<li>Used the gui.guiHelper module to ensure the correct appearance of the
addon's configuration dialog;</li>
<li>Used format instead of %s for formatted strings;</li>
<li>Used compliance with guidelines for implementation.</li>
</ul>
<h2>Change for version 2.3</h2>
<ul>
<li>Added the GPL license to the addon;</li>
<li>Changed the shortcut of the script giving the end of selection from Ctrl +
Shift + N to Ctrl + Shift + E because Ctrl + Shift + N doesn't work with
the latest versions of mp3DirectCut;</li>
<li>Added a script to confirm that the selection has been canceled with
'Ctrl+r';</li>
<li>Made some corrections in the code of the appModule 'mp3directcut.py'.</li>
</ul>
<h2>A 2.2 verzió újdonságai</h2>
<ul>
<li>Correction of the scripts giving the selection markers' locations.</li>
</ul>
<h2>A 2.1.1. verzió változásai</h2>
<ul>
<li>Removing the script giving the total time and adding this information to
the script giving the elapsed time;</li>
<li>A bővítmény konfigurációs beállításaihoz hozzáadták azt a képességet, hogy
a bővítmény bemondja-e a szóköz billentyűt annak használatakor vagy sem,
függetlenül a többi információ bemondásától;</li>
<li>Added the ability to enable or disable the announcement of placement of
the selection marqueures in the module's configuration options;</li>
<li>Adding the announcement of the current part when moving through the
cutting points;</li>
<li>Javították a "függőleges billentyűk" bemondását;</li>
<li>Hozzáadták azt a szkriptet, mellyel az NVDA+H megnyitja a bővítmény
súgóját;</li>
<li>Áthelyezték a bővítmény beállítási menüjét az eszközökből az
NVDA/beállítások menübe;</li>
</ul>
<h2>A 2.1. verzió változásai</h2>
<ul>
<li>Adding a script to vocalize moving to the next splitting point with
Control+Right Arrow;</li>
<li>Adding a script to vocalize moving to the previous splitting point with
Control+Left Arrow;</li>
<li>Adding a script to vocalize the displacement of 4 hundredths of second
ahead, with Shift+Right Arrow;</li>
<li>Adding a script to vocalize the displacement of 4 hundredths of second
back, with Shift+Left Arrow;</li>
<li>Correction of the addon's summary from 'for mp3DirectCut' to
'mp3DirectCut'.</li>
</ul>
<h2>A 2.0. verzió változásai</h2>
<ul>
<li>Hozzáadták azt a szkriptet, mellyel a hátralévő időt lehet lekérdezni
(Control Shift R)</li>
<li>Fixed reading durations including hours;</li>
<li>Added ability to differentiate thousandths or hundredths of seconds.</li>
</ul>
<h2>Az 1.1. verzió változásai</h2>
<ul>
<li><p>Added the ability to include the mp3DirectCut category into the Input
Gestures;</p>
<ul>
<li>They will be visible only during use of the mp3DirectCut software.</li>
</ul>
</li>
<li><p>Added the ability to enable or disable automatic messages, in the tools
menu of NVDA, item 'mp3DirectCut configuration';</p></li>
</ul>
<h2>Az 1.0. verzió változásai</h2>
<ul>
<li>Első verzió.</li>
</ul>
Bajbúvárhttp://addons.nvda-project.org/addons/crashHero.hu.html2023-10-31T02:07:42Z2016-07-08T06:20:30Z
<ul>
<li>Author: Derek Riemer</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=crashHero-beta">beta version</a></li>
</ul>
<p>Note: This add-on is primarily useful for developers, or people running test
versions of NVDA. Use this add-on to let NVDA prompt you for more
information after a crash. For more information, visit <a href="https://derekriemer.com/node/44">the Crash Hero
add-on blog post</a>.</p>
A nap tippjehttp://addons.nvda-project.org/addons/tipOfTheDay.hu.html2023-05-10T20:38:33Z2016-06-05T03:01:17Z
<ul>
<li>Írta: Derek Riemer.</li>
<li>Letöltés <a href="https://www.nvaccess.org/addonStore/legacy?file=tod">stabil verzió</a></li>
<li>Letöltés <a href="https://www.nvaccess.org/addonStore/legacy?file=tod-dev">fejlesztői verzió</a></li>
</ul>
<p>Ez a bővítmény segít az NVDA használatának elsajátításában azzal, hogy
minden nap ad egy tippet.</p>
<h2>Tudnivalók:</h2>
<p>A bővítmény telepítése után az NVDA-t újra kell indítani. Ekkor a bővítmény
kéri, hogy állítsuk be, miként használjuk az NVDA-t. Kiválaszthatjuk a
jártassági szintünket. Például, ha kezdők vagyunk a számítógép-használatban,
válasszuk a kezdő szintet.</p>
<p>Ezek után az NVDA naponta egy tippet fog mutatni. Az előre és vissza
gombokkal váltogathatunk a megtekinthető tippek között, majd nyomjuk meg az
escape billentyűt vagy a bezárás gombot, ha végeztünk. A gombokat a tab
billentyűvel találhatjuk meg, ha a párbeszédpanel nyitva van, a szóközzel
vagy az enterrel lehet megnyomni őket. Ha végeztünk, akár a
szerkesztőmezőben vagyunk, akár másutt, az escape-et vagy a bezárás gombot
megnyomva hagyhatjuk el a párbeszédpanelt. Ha szeretnénk tippet kérni,
válasszuk a nap tippje menüpontot az NVDA menüből.</p>
<p>Ha szeretnénk megváltoztatni a felhasználói szintünket, hogy megfelelőbb
tippeket kapjunk, válasszuk az NVDA beállítások/a nap tippje menüt. A
bővítmény telepítését és az NVDA újraindítását követően a bővítmény
megkérdezi a felhasználói szintünket.</p>
Aranykurzorhttp://addons.nvda-project.org/addons/goldenCursor.hu.html2023-05-10T20:38:33Z2016-01-16T19:07:07Z
<ul>
<li>Készítők: salah atair, Joseph Lee</li>
<li>Letöltés <a href="https://www.nvaccess.org/addonStore/legacy?file=goldenCursor">Stabil verzió</a></li>
<li>NVDA compatibility: 2022.4 and beyond</li>
</ul>
<p>Ez a kiegészítő lehetővé teszi az egérkurzor mozgatását a billentyűzet
használatával, ill. elmenthet vele egérkurzor-koordinátákat a különböző
alkalmazásokhoz.</p>
<h2>Billentyűparancsok</h2>
<ul>
<li>Control+NVDA+L: view saved mouse positions for an application, if any. You
can also assign gestures to these positions from this dialog. When
pressing the assigned gesture, a left click will be performed in the saved
position.</li>
<li>Shift+NVDA+l: Aktuális egérpozíció elmentése az aktív alkalmazáshoz.</li>
<li>Windows+NVDA+C: az egérmutató elmozdulás mértékének változtatása.</li>
<li>Windows+NVDA+R: Be- vagy kikapcsolja az Egérmozgatás korlátozását az aktív
ablakra.</li>
<li>Windows+NVDA+S: Be- vagy kikapcsolja az egérkurzor pozíciójának
bemondását. Az egérkurzor helye képpontban értendő.</li>
<li>Windows+NVDA+J: Az egérkurzort a képernyő egy x, y koordinátákkal megadott
pontjára helyezi.</li>
<li>Windows+NVDA+P: aktuális egérpozíció bejelentése.</li>
<li>Windows+NVDA+M: egérmozgatás nyílbillentyűkkel be- vagy kikapcsolása.</li>
<li>Windows+NVDA+nyílbillentyűk (vagy csak nyílbillentyűk, ha az egérmozgatás
nyílbillentyűkkel be van kapcsolva ): egérkurzor mozgatása.</li>
</ul>
<p>Megjegyzés: Ezek a parancsok megváltoztathatók az NVDA Beviteli parancsok
párbeszédpanelén az Aranykurzor kategóriában.</p>
<h2>Megjegyzések</h2>
<ul>
<li>A pozíciók megosztása csak azonos képernyőfelbontást használók között
működik megfelelően.</li>
<li>A legmegfelelőbb működéshez tegye teljes képernyőssé az ablakokat a
Windows gomb+felnyíl paranccsal</li>
<li>A pozíciók megosztása esetén át kell nevezni a már létező elnevezésekkel
ütközőket.</li>
<li>Az 1.x és a 2.x verzióban elmentett egérkurzor pozíciók adatai nem
kompatibilisek egymással.</li>
<li>Amint ismét a nyílbillentyűk hagyományos funkcióira van szükség ki kell
kapcsolni az egérmozgatás nyílbillentyűkkel opciót.</li>
<li>Amennyiben az elmentett egérpozíciók törlése után nem marad adott
alkalmazáshoz egy egérpozíció sem, az alkalmazáshoz tartozó egérpozíciós
fájl is törlődik.</li>
</ul>
<h2>Version 6.2</h2>
<ul>
<li>Requires NVDA 2022.4 or later.</li>
<li>Compatible with NVDA 2023.1.</li>
</ul>
<h2>Version 6.1</h2>
<ul>
<li>Requires NVDA 2021.3 or later.</li>
<li>Now, you can assign shortcuts for saved positions from the positions
list. When pressing a shortcut, a left click will be performed for the
position.</li>
</ul>
<h2>Version 5.0</h2>
<ul>
<li>Modernized add-on source code to make it compatible with NVDA 2021.1.</li>
<li>Resolved many coding style issues and potential bugs with Flake8.</li>
</ul>
<h2>4.0-s verzió</h2>
<ul>
<li>Az NVDA 2019.3 és újabb verziójára van szükség a futtatáshoz.</li>
<li>Az Aranykurzor beállításai mostantól az NVDA beállításai között érhetőek
el az Aranykurzor kategóriában.</li>
</ul>
<h2>3.3-as verzió</h2>
<ul>
<li>későbbi NVDA kiadások támogatása</li>
</ul>
<h2>3.2-es verzió</h2>
<ul>
<li>A bővítmény már kompatibilis az NVDA 2018.3 kiadásával (wxPython 3).</li>
</ul>
<h2>3.0-s verzió</h2>
<ul>
<li>Az NVDA 2018.2 kiadásában az Aranykurzor beállításai az NVDA beállításai
közé kerültek az Aranykurzor kategóriába.</li>
</ul>
<h2>2.1-es verzió</h2>
<ul>
<li>Javították az Unicode kódolási hibát ami az elnevezett egérpozíciók
törlésénél lépett fel.</li>
<li>A bővítménynek mindig csak egy párbeszédablaka lehet nyitva.</li>
<li>Javították az egérpozíciók listájának és a megadott pozícióra ugrás
ablakának megjelenését.</li>
</ul>
<h2>2.0-s verzió</h2>
<ul>
<li>Az NVDA 2017.3 vagy újabb kiadására van szükség a bővítmény használatához.</li>
<li>Az 1.x verzióban elmentett egérpozíciók nem kompatibilisek ezzel a
kiadással, de a bővítmény telepítése során a program elvégzi a szükséges
átalakításokat, hogy a korábban elmentett egérpozíciók továbbra is
használhatóak legyenek.</li>
<li>Az Aranykurzor beállításai elérhetők az NVDA Beállítások menüjéből. A
megjelenő párbeszédablakon az egérpozíció bemondását és az egérkurzor
elmozdulásának a mértékét lehet beállítani.</li>
<li>A bővítményben több üzenetet is megváltoztattak.</li>
<li>A beállítások változtatásakor a program már nem ad hangjelzést.</li>
<li>Már lehetséges az egérkurzort a nyílbillentyűkkel mozgatni, ehhez be kell
kapcsolni az egérmozgatás a nyílbillentyűkkel opciót.</li>
<li>Az egérpozíciók listáján az elmentett egérpozíciók mellett már látszanak
az elmentett pozíció koordinátái, illetve az ablak címsorának már része az
alkalmazás neve,amihez az elmentett egérpozíciók tartoznak.</li>
<li>Az egérpozíciók listáján már az enter lenyomásával is a kívánt pozícióra
ugrik az egérkurzor.</li>
<li>Az elmentett egérpozíciók átnevezésénél a program már figyelmeztet, ha egy
már létező nevet próbálunk megadni.</li>
<li>Az elmentett egérpozíciók törlésénél a program már kér megerősítést a
művelet végrehajtása előtt.</li>
<li>Megváltozott az Ugrás pozícióra lehetőség: Meg lehet adni az x és y
koordinátákat egymástól külön-külön, számértékekkel, vagy a felnyíl és
lenyíl segítségével.</li>
<li>Az egérpozíciók elmentésére szolgáló ablak már mutatja az aktuális
egérpozíció koordinátáit.</li>
<li>When saving positions, resolved an issue where NVDA may play error tones
if the positions folder does not exist.</li>
</ul>
<h2>1.4-es verzió</h2>
<ul>
<li>eltávolították a Win32 API függőséget, hogy a bővítmény kompatibilis
legyen az NVDA későbbi kiadásaival.</li>
</ul>
<h2>1.0-s verzió</h2>
<ul>
<li>Első kiadás</li>
</ul>
A hét napjahttp://addons.nvda-project.org/addons/dayOfTheWeek.hu.html2024-03-26T20:46:21Z2015-09-30T21:50:46Z
<ul>
<li>Fejlesztők: Abdel, Noelia.</li>
</ul>
<p>Ezzel a kiegészítővel meghatározhatja egy kiválasztott dátumhoz tartozó
napját a hétnek.</p>
<p>It adds a submenu in the NVDA Tools menu named "Day of the week", containing
2 items:</p>
<ul>
<li><p>The first one named "Search a day", opens a dialog composed of 3 controls:</p>
<ul>
<li>A listbox to choose or type your date;</li>
<li>An "OK" button to display a messageBox containing your day;</li>
<li>Egy Mégse gomb, ami bezárja az ablakot.</li>
</ul>
</li>
<li><p>The second one named "dayOfTheWeek add-on settings" opens the parameters
of the add-on to specify whether you want to report labels for date fields
or not, it is composed of the following elements:</p>
<ul>
<li>Enable accessibility of the date selector;</li>
<li><p>Level of the announces of labels, you will then have 3 choices:</p>
<ul>
<li>Long (it's the default choice);</li>
<li>Short (for short announcements);</li>
<li>Off (to disable labels announcements).</li>
</ul>
</li>
<li><p>Enable announcement of the current date field value only, when moving
vertically;</p></li>
<li>An "OK" button to save your configuration;</li>
<li>A "Cancel" button to cancel and close the dialog.</li>
</ul>
</li>
</ul>
<h2>Megjegyzés</h2>
<ul>
<li>You can close these dialogs just by pressing Escape;</li>
<li>You can assign a shortcut to open these dialogs in "Input gestures" menu
and, more precisely, in the "Day of the week" category;</li>
<li>If you use NVDA 2018.2 or higher, you'll find only one item in the tool
menu for searching your day, the add-on settings will be in the NVDA
settings panel.</li>
</ul>
<h2>Compatibility</h2>
<ul>
<li>This add-on is compatible with the versions of NVDA ranging from 2019.3
and beyond.</li>
</ul>
<h2>Changes for 20240326.0.0</h2>
<ul>
<li>Updated compatibility for nvda-2024.1.;</li>
<li>Deleted download link from readme, the download link for future updates
will now only be available from the add-on store.</li>
</ul>
<h2>Changes for 20231229.0.0</h2>
<ul>
<li>Added a backward compatible implementation to support speak on demand
mode, which will soon be available with nvda-2024.1.</li>
</ul>
<h2>Changes for 20231015.0.0</h2>
<ul>
<li>Fixed a bug detected when navigating with up arrow from the date picker in
the latest versions of NVDA.</li>
</ul>
<h2>Changes for 20230728.0.0</h2>
<ul>
<li>Applied the flake8 and mypy rules to the code;</li>
<li>Changed the minimum supported NVDA version to 2019.3 to support
annotations introduced in Python 3.</li>
</ul>
<h2>Changes for 20230508.0.0 and beyond</h2>
<ul>
<li>Changed version number, minimum NVDA version and download link according
to store conventions/requirements.</li>
</ul>
<h2>Changes for 19.02</h2>
<ul>
<li>Changed version numbering using YY.MM (The year in 2 digits, followed by a
dot, followed by the month in 2 digits);</li>
<li>Added compatibility with the new versioning format of add-on, appeared
since nvda 2019.1.</li>
</ul>
<h2>Changes for 6.0</h2>
<ul>
<li>added the addon settings to the NVDA settings panel for NVDA 2018.2 and
higher;</li>
<li>Moved the item for searching a day to the tools menu;</li>
<li>Added the backward compatibility of the add-on with the NVDA versions that
preceded 2018.2, which included the settings panel.</li>
</ul>
<h2>Changes for 5.0</h2>
<ul>
<li>Added the compatibility of the add-on with wxPython 4.0 and Python3;</li>
<li>Fixed a bug with add-on paths that contain non-ASCII characters.</li>
</ul>
<h2>Changes for 4.0</h2>
<ul>
<li>The add-on is now able to recognize all the regional date formats that the
user can choose;</li>
<li>Added the backward compatibility of the add-on with the NVDA versions that
preceded 2016.4, which included the gui.guiHelper module.</li>
</ul>
<h2>Changes for 3.1</h2>
<ul>
<li>Back to the previous format for the day of the week because it allows to
recognize a greater number of languages;</li>
<li>Improved the accessibility of the date selector with recognition of the 3
fields 'Day', 'Month' and 'Year', and their respective values;</li>
<li>Added a technique for the integration of the Georgian language for the
recognition of the days of the week;</li>
<li>Added a configuration dialog box to enable or disable the accessibility of
the date selector;</li>
<li>Moved the add-on submenu from "Tools" to "Preferences";</li>
<li>Changed the add-on category to "Day of the week".</li>
</ul>
<h2>Changes for 2.0</h2>
<ul>
<li>Used the gui.guiHelper module to ensure the correct appearance of the
dialog asking for a date;</li>
<li>Added the GPL license to the addon;</li>
<li>Days of the week have been translated, so that the add-on works properly
in the different languages;</li>
<li>Changed the day format to avoid encoding errors.</li>
</ul>
<h2>Az 1.0 verzió változásai:</h2>
<ul>
<li>Első kiadás</li>
</ul>
VLC Médialejátszóhttp://addons.nvda-project.org/addons/vlc.hu.html2023-05-10T20:38:33Z2015-09-29T22:47:07Z
<ul>
<li>Fejlesztő: Javi Dominguez</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=vlc">stable version</a></li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=vlc-dev">development version</a></li>
</ul>
<p>Ez a kiegészítő a VLC Médialejátszó akadálymentes használatát segíti.</p>
<ol>
<li>Lehetővé teszi a lejátszó vezérlőgombjai közti navigálást Tab és
Shift+Tab paranccsal. A kiválasztott vezérlő aktiválásához nyomja meg az
entert.</li>
<li>Az állapotsor lekérdezéséhez használja az I billentyűt. A parancs az NVDA
beviteli parancsai közt megváltoztatható.</li>
<li>Bemondja az eltelt időt a VLC billentyűparancsokkal történő előre és
visszafelé léptetés közben: Control plusz balra/jobbra nyíl az 1 perces
ill. Shift plusz balra/jobbra nyíl az 5 másodperces léptetéshez. Egy
billentyűparanccsal szabályozható a parancs bőbeszédűsége.</li>
<li>Bejelenti az új státuszt, ha kapcsolgatjuk a véletlenszerű lejátszást
(parancsbillentyű: R) és az ismétlőmódot (parancsbillentyű: L).</li>
<li><p>Vannak olyan ablakok és panelek, melyekre az NVDA nem képes automatikusan
áthelyezni a fókuszt amikor megjelennek a képernyőn. A Ctrl+Tab
paranccsal manuálisan aktív státuszba hozhatók.</p></li>
<li><p>Important note: This addon is optimized for versions of VLC 3.0 and
higher; it will not work correctly with earlier versions.</p></li>
<li>A GNU általános és nyilvános licenc hatálya alá tartozik. Részletekért
nézze meg a következőt: <a href="https://github.com/javidominguez/VLC/blob/master/COPYING.txt">file
COPYING.txt</a></li>
</ol>
Windows App Essentialshttp://addons.nvda-project.org/addons/wintenApps.hu.html2024-03-23T20:29:02Z2015-09-19T17:16:47Z
<ul>
<li>Authors: Joseph Lee, Derek Riemer and others</li>
</ul>
<p>Note: Originally called Windows 10 App Essentials, it was renamed to Windows
App Essentials in 2021 to support Windows 10 and future releases such as
Windows 11. Parts of this add-on will still refer to the original add-on
name.</p>
<p>This add-on is a collection of app modules for various modern Windows apps,
as well as enhancements and fixes for certain controls found in Windows 10
and later.</p>
<p>The following app modules or support modules for some apps are included (see
each app section for details on what is included):</p>
<ul>
<li>Modern keyboard</li>
<li>Settings (Windows+I)</li>
</ul>
<p>Notes:</p>
<ul>
<li>This add-on requires 64-bit Windows 10 22H2 (build 19045), 11 22H2 (build
22621), or later releases.</li>
<li>Feature update support duration is tied to consumer support duration
(Home, Pro, Pro Education, Pro for Workstations editions) and the add-on
may end support for a feature update prior to end of consumer support. See
<a href="https://aka.ms/WindowsTargetVersioninfo">https://aka.ms/WindowsTargetVersioninfo</a> for more information and support
dates.</li>
<li>Although installation is possible, this add-on does not support Windows
Enterprise LTSC (Long-Term Servicing Channel) and Windows Server releases.</li>
<li>Not all features from Windows Insider Preview builds will be supported,
more so for features introduced to a subset of Windows Insiders in canary
and dev channels.</li>
<li>The add-on may emulate changes included in Insider Preview builds which
are subsequently removed, and for these changes, the add-on may remove
them in future releases.</li>
<li>Add-on dev channel will include changes including experimental content
that may or may not be included in beta and stable releases, and beta
channel will come with changes planned for future stable releases.</li>
<li>Some add-on features are or will be part of NVDA screen reader.</li>
<li>For best experience with apps that embed web technologies and content such
as Start menu and its context menu, enable "Automatic focus mode for focus
changes" setting from NVDA's browse mode settings panel.</li>
</ul>
<p>For a list of changes made between each add-on releases, refer to
<a href="https://github.com/josephsl/wintenapps/wiki/w10changelog">changelogs for add-on releases</a> document.</p>
<h2>General</h2>
<ul>
<li>In Windows 11 24H2 Insider Preview builds, quick settings (shellhost.exe)
interface elements can be navigated using mouse and/or touch interaction.</li>
</ul>
<h2>Modern keyboard</h2>
<p>This includes emoji panel, clipboard history, touch keyboard,
dictation/voice typing, hardware input suggestions, suggested actions, and
modern input method editors for certain languages across Windows 10 and
11. When viewing emojis, for best experience, enable Unicode Consortium
setting from NVDA's speech settings and set symbol level to "some" or
higher. When pasting from clipboard history in Windows 10, press Space key
instead of Enter key to paste the selected item.</p>
<ul>
<li>In Windows 11, NVDA will announce suggested actions when compatible data
such as phone numbers is copied to the clipboard. This is now part of NVDA
2024.2.</li>
</ul>
<h2>Settings (Windows+I)</h2>
<ul>
<li>NVDA will report updates to Windows Update status as download and install
progresses. In Windows 10, this may result in speech interruption when
navigating Settings app while updates are being downloaded and
installed. In Windows 11, object navigation can be used in updates list to
review update status for individual entries.</li>
</ul>
NVDA Távelérés támogatásahttp://addons.nvda-project.org/addons/nvdaremote.hu.html2023-05-10T20:38:33Z2015-07-03T22:28:26Z
<ul>
<li>Készítők: Christopher Toth, Tyler Spivey</li>
</ul>
<p>A kiegészítő segítségével egy távoli számítógépet tudunk vezérelni az NVDA
használatával. Bővebb információt a <a href="https://nvdaremote.com/">kiegészítő weblapján</a> olvashat.</p>
TeamTalk Classichttp://addons.nvda-project.org/addons/teamtalk.hu.html2023-05-10T20:38:33Z2015-06-10T18:49:53Z
<ul>
<li>Készítő: Doug Lee.</li>
<li>Letöltés <a href="https://www.dlee.org/teamtalk/NVDA/TeamTalk%20Classic.nvda-addon">Stabil verzió</a></li>
</ul>
<p>A kiegészítő javítja a TeamTalk használatát az NVDA programmal. Bővebb
információkért látogassa meg a <a href="https://www.dlee.org/teamtalk/NVDA/">bővítmény weblapját.</a></p>
Egyszerűsített Táblázatnavigációhttp://addons.nvda-project.org/addons/easyTableNavigator.hu.html2024-02-13T14:36:34Z2015-04-06T01:20:45Z
<ul>
<li>Authors: Corentin Bacqué-Cazenave, Joseph Lee</li>
<li><a href="https://www.nvaccess.org/addonStore/legacy?file=etn">stabil verzió</a> letöltése</li>
<li><a href="https://www.nvaccess.org/addonStore/legacy?file=etn-dev">fejlesztői verzió</a> letöltése</li>
<li>NVDA compatibility: 2019.3 and beyond</li>
</ul>
<p>This plugin adds a layer command to use simplified key combination to
navigate table cells. When the layered commands are enabled, you can
perform the following actions:</p>
<ul>
<li>Navigate to the previous or next cell horizontally or vertically using
arrow keys</li>
<li>Navigate to the first or last cell of the row or the column using
control+arrow keys or Home, End, PageUp and PageDown</li>
<li>Read the whole row or column without moving the system caret using
windows+leftArrow / windows+upArrow</li>
<li>Read the row or column starting from the current cell using
windows+rightArrow / windows+downArrow</li>
</ul>
<p>jelenleg támogatott táblázatok:</p>
<ul>
<li>Böngészőmód (Internet Explorer, Firefox, stb.).</li>
<li>Microsoft Word.</li>
</ul>
<h2>Parancsok</h2>
<ul>
<li>Egyszerűsített Táblázatnavigáció be- és kikapcsolása. (Nincs hozzárendelve
billentyűparancs).</li>
</ul>
<h2>Changes for 2.4</h2>
<p>For this release, many thanks goes to Cyrille Bougot for his work.</p>
<ul>
<li>Table navigation fixed in MS Word</li>
<li><p>Introduce new commands following changes in NVDA 2022.2 and 2022.4</p>
<ul>
<li>home/end/pgUp/pgDown to jump to start/end of row/column</li>
<li>control+left/right/up/downArrow to jump to start/end of row/column
(alternative shortcut key for the same result)</li>
<li>NVDA+left/up to read the whole row/column starting from the first cell
without moving the current position of the cursor</li>
<li>NVDA+right/down for sayAll in row/column, i.e. read the cells of the
current row/column, starting from the current cell and moving the
cursor's position while reading until the last cell of the row/column.</li>
</ul>
</li>
<li><p>Remaped some keys to avoid conflicts:</p>
<ul>
<li>NVDA+upArrow/leftArrow becomes windows+upArrow/leftArrow (to read full
column/row)</li>
<li>NVDA+downArrow/rightArrow becomes windows+downArrow/rightArrow (say
all in column/row)</li>
</ul>
</li>
<li><p>Compatibility with NVDA 2023.1</p></li>
</ul>
<h2>Changes for 2.3</h2>
<ul>
<li>It is now possible to disable table navigation layer from everywhere</li>
<li>Compatibility with NVDA 2022.1</li>
<li>Fix error when reloading the addon</li>
</ul>
<h2>Changes for 2.2.1</h2>
<ul>
<li>Fixed an error in some type of documents including Word and Outlook</li>
</ul>
<h2>Changes for 2.2</h2>
<ul>
<li>Update documentation style from addons template</li>
<li>First translated version</li>
</ul>
<h2>Changes for 2.1.1</h2>
<ul>
<li>New author in manifest and documentation</li>
</ul>
<h2>Changes for 2.1</h2>
<ul>
<li>Compatibility with NVDA 2021.1</li>
</ul>
<h2>A 2.0 verzió változásai</h2>
<ul>
<li>Az NVDA 2019.3 verzióra van szükség a futtatáshoz.</li>
<li>A bővítmény bizonyos üzeneteit lefordíthatóvá tették.</li>
</ul>
<h2>Az 1.2 verzió változásai</h2>
<ul>
<li>Belső változtatások a későbbi NVDA kiadásokkal való kompatibilitás miatt.</li>
</ul>
<h2>Az 1.1 verzió változásai</h2>
<ul>
<li>Hibajavítás: már nem hangzik el hibajelzés az Outlook üzenetek
helyesírás-ellenőrzése közben.</li>
</ul>
<h2>Az 1.0 verzió változásai</h2>
<ul>
<li>Első kiadás</li>
</ul>
Óra- s naptárbővítmény az NVDA Programhozhttp://addons.nvda-project.org/addons/clock.hu.html2024-02-13T14:37:40Z2015-03-27T20:43:09Z
<ul>
<li>Authors: Hrvoje Katić, Abdel and NVDA contributors</li>
<li><p>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=clock">stable version</a></p></li>
<li><p>NVDA compatibility: 2019.3 and later</p></li>
</ul>
<p>This add-on enables the advanced clock, alarm timer and calendar
functionality for NVDA.</p>
<p>You can configure NvDA to announce time and date in formats other than what
Windows provides by default. Additionally, you can obtain the current day,
week number, as well as the remaining days before the end of the current
year, and you can also set automatic time announcement on specified
interval. There's also a stopwatch and Alarm timer features built-in to the
add-on that lets you time your tasks, such as copying files, installing
programs, or cooking meals.</p>
<p>Notes:</p>
<ul>
<li>if you install the add-on as an update, during the installation process,
the wizard detects if the old configuration is compatible with the new one
and offers to correct it before installing, then you'll just have to
validate the OK button to confirm that.</li>
<li>On Windows 10 and later, you can use Alarms and Clock app to manage
stopwatch and timers.</li>
</ul>
<h2>Billentyűparancsok</h2>
<ul>
<li>NVDA+F12: get current time</li>
<li>NVDA+F12 pressed twice quickly: get current date</li>
<li>NVDA+F12 pressed three times quickly: reports the current day, the week
number, the current year and the remaining days before the end of the year</li>
<li>NVDA+Shift+F12: enter clock layer</li>
</ul>
<h2>Unassigned commands</h2>
<p>The following commands are not assigned by default; if you wish to assign
them, use Input Gestures dialog to add custom commands. To do so, open NVDA
menu, Preferences, then Input Gestures. Expand Clock category, then locate
unassigned commands from the list below and select "Add", then enter the
gesture you wish to use.</p>
<ul>
<li>Elapsed and remaining time before the next alarm. pressing this gesture
twice quickly will cancel the next alarm.</li>
<li>Stop currently playing alarm sound.</li>
<li>Display schedule alarms dialog box.</li>
</ul>
<h2>Layered commands</h2>
<p>To use layered commands, press NVDA+Shift+F12 followed by one of the
following keys:</p>
<ul>
<li>S: Starts, resets or stops the stopwatch</li>
<li>R: Resets stopwatch to 0 without restarting it</li>
<li>A: gives the elapsed and remaining time before the next alarm</li>
<li>T: opens schedule alarms dialog.</li>
<li>C: Cancel the next alarm</li>
<li>Space: Speaks current stopwatch or count-down timer</li>
<li>p: If an alarm is too long, allows to stop it</li>
<li>H: List all layered commands (Help)</li>
</ul>
<h2>Configuration and usage</h2>
<p>To configure clock functionality, open NvDA menu, Preferences, then
Settings, and configure the following options from Clock panel:</p>
<ul>
<li>Time and date display format: use these combo boxes to configure how NVDA
will announce time and date when you press NVDA+F12 once or twice quickly,
respectively.</li>
<li>Interval: choose the time announcement interval from this combo box (off,
every 10 minutes, 15 minutes, 30 minutes, or every hour).</li>
<li>Time announcement (enabled if interval is not off): choose between speech
and sound, sound only, or speech only.</li>
<li>Clock chime sound (enabled if interval is not off): select the clock chime
sound.</li>
<li>Quiet hours (enabled if interval is not off): select this checkbox to
configure quiet hours range when automatic time announcement should not
occur.</li>
<li>Quiet hours time format (enabled if quiet hours is enabled): select how
quiet hours options are presented (12-hour or 24-hour format).</li>
<li>Quiet hours start and end times: select hour and minute range for quiet
hours from hours and minutes combo boxes.</li>
</ul>
<p>To schedule alarms, open NVDA menu, Tools, then select Schedule Alarms. The
dialog contents include:</p>
<ul>
<li>Alarm duration in: select alarm/timer duration between hours, minutes, and
seconds.</li>
<li>Duration: enter alarm duration in the unit specified above.</li>
<li>Alarm sound: select the alarm sound to be played.</li>
<li>Stop and pause buttons: stop or pause a long alarm sound.</li>
</ul>
<p>Click OK, and a message will inform you the curretnly selected alarm
duration.</p>
Newfon beszédszintetizátorhttp://addons.nvda-project.org/addons/newfon.hu.html2024-02-13T14:37:13Z2015-02-25T03:21:40Z
<ul>
<li>Authors: Sergey Shishmintsev, Alexy Sadovoi, Sergey A.K.A. Electrik, Kvark
and other developers</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=newfon">stable version</a></li>
<li>NVDA Compatibility: 2019.2 to 2023.1</li>
</ul>
<h3>About</h3>
<p>Newfon is a speech synthesizer that supports Russian and Ukrainian for the
first time since its release. Later Croatian, Polish and Serbian were added.</p>
<h3>General features:</h3>
<ul>
<li>Ability to change languages;</li>
<li>Changing the sampling rate;</li>
<li>Sound interpolation to simulate the sound of old DOS screen readers and
book readers;</li>
<li>In order for the synthesizer to read the text as it is written, it is
possible to disable the built-in accent dictionary. Option works only for
Russian language;</li>
<li>The synthesizer, in addition to the main rate from 0 to 100%, supports
additional speech acceleration, which reduces the time of reading the
text;</li>
<li>To get a smoother reading at high speeds, it is possible to adjust the
pauses between phrases.</li>
</ul>
<h3>Note:</h3>
<p>Numerous versions of Newfon have been released since it was first published
on the NVDA official add-ons site, but unfortunately the lead developer
Sergey Shishmintsev died, which delayed the update of the synthesizer on the
site.</p>
<p>In 2017, the current developers of the Newfon speech synthesizer had the
opportunity to get the source codes for Sergey's developments. His
relatives, thanks to whom this happened, set them only one condition: if the
development of his projects continues, they must become free.</p>
<p>The developers, in turn, decided that history should not forget Sergey
Shishmintsev, as he was a unique programmer with an enormous amount of
perseverance, hard work and knowledge.</p>
<h2>Changelog</h2>
<h3>Version 2023.3</h3>
<p>The GPL license is back in place of MIT. Now MIT is used for open source
scripts and GPL is used for Newfon speech driver.</p>
<h3>Version 2023.2</h3>
<p>Newfon license changed from GPL to MIT license.</p>
<h3>Version 2023.1</h3>
<ul>
<li>Added compatibility with NVDA 2023.1 (backwards compatibility with NVDA
2019 is still supported);</li>
<li>Added Newfon license agreement in English;</li>
<li>Added documentation in Russian.</li>
</ul>
<h3>Version 2022.04.16</h3>
<p>Compatible with NVDA 2022 (Backward compatibility with NVDA 2019.2 is still
supported.).</p>
<h3>Version 2021.06.06</h3>
<p>For compatibility with later versions of NVDA, the lastTestedNVDAVersion
value has been changed.</p>
<h3>Version 2021.03.19</h3>
<p>For compatibility with subsequent versions of NVDA, the internal mechanisms
for the interaction of the synthesizer with NVDA drivers have been changed.</p>
<h3>Version 2021.01.16</h3>
<h4>Added:</h4>
<p>speech.BreakCommand - This feature is required by some add-ons to pause
speech for a while.</p>
<h4>Fixed:</h4>
<p>In Ukrainian, some capital letters were not read correctly.</p>
<h3>Version 2020.12.28</h3>
<p>In this version, a significant processing of scripts, restructuring of the
add-on, new languages (test opportunity) and much more was made.</p>
<h4>Added:</h4>
<ul>
<li>New languages: Croatian, Polish, Serbian. These scripts were taken from
open sources and provided by beta testers. The author cannot be
responsible for the operation of these scripts, so you use them as is -
without any guarantees;</li>
<li>Some old Russian characters have been added to the Russian language: "і":
"и десятеричное", "ѣ": "ять", "ѳ": "фита", "ѵ": "ижица", "ў": "у краткое",
"ґ": "гэ взрывное". Accordingly, if you read the old Russian word, it will
be read correctly;</li>
<li>Sound interpolation. Now you can imitate the sound of a newfon, just like
in the old DOS screen readers and book readers. To implement this feature,
the libsamplerate library is used;</li>
<li>Now you can turn off reading decimal fractions (only for Russian and
Ukrainian), which improves the reading of program versions.</li>
</ul>
<h4>Changed:</h4>
<ul>
<li>The add-on has been completely reworked. now all the code is not in one
<strong>init</strong>.py file, which makes maintaining the code and adding new
languages much easier;</li>
<li>Queues from DLLs have been ported to Python, which has a good effect on
the stability of the add-on.</li>
</ul>
<h4>Fixed:</h4>
<p>Sound out of sync bug that occasionally appeared on the latest versions of
NVDA.</p>
<h3>Version 2020.09.12</h3>
<h4>Changed:</h4>
<p>Due to a change in the way the audio subsystem works In new alpha versions
of NVDA, the sample rate was not switched properly.</p>
<h3>Version 2020.03.12</h3>
<h4>Added:</h4>
<ul>
<li>At the request of users, an optional ability has been added for English
pronunciation, instead of the sound е, pronounce the sound э - like in the
old add-ons;</li>
<li>Now the add-on has localization, accordingly, on the Ukrainian NVDA
interface, all additional parameters will be displayed in the
corresponding language.</li>
</ul>
<h4>Changed</h4>
<ul>
<li>Thanks to the programmer Kvark, the internal architecture of the add-on
was rewritten to the third Python;</li>
<li>For fans of non-standard voices, the list of sampling frequencies has been
expanded.</li>
</ul>
Két beszédmotorhttp://addons.nvda-project.org/addons/dualvoice.hu.html2023-05-10T20:38:33Z2015-02-17T22:28:44Z
<ul>
<li>Készítő: Mahmood Taghavi</li>
<li>Letöltés <a href="https://sourceforge.net/projects/dualvoice/files/latest/download">stabil verzió</a></li>
</ul>
<p>A kiegészítő használatával két különböző beszédszintetizátort vagy hangot
rendelhet egy-egy megadott nyelvhez. Bővebb információk a bővítményről <a href="https://mahmood-taghavi.github.io/dual_voice/">a
súgóban</a> olvashatóak.</p>
Vágólap tartalomtervezőhttp://addons.nvda-project.org/addons/clipContentsDesigner.hu.html2024-03-10T17:40:18Z2014-12-13T09:43:18Z
<ul>
<li>Készítők: Noelia, Abdel.</li>
</ul>
<p>A kiegészítő abban az esetben hasznos, ha több különböző szövegrészt
szeretnénk összefűzni, majd azt a vágólapról beilleszteni. A vágólap
tartalma törölhető, illetve megjeleníthető böngésző módban.</p>
<h2>Billentyűparancsok</h2>
<ul>
<li>NVDA+windows+c: A vágólap tartalmához fűzi a kijelölt vagy az áttekintő
kurzorral megjelölt szöveget, és az unikód braille MathML objektumot
reprezentáló karaktereket is.</li>
<li>NVDA+windows+x: Vágólap tartalom törlése.</li>
<li>Alapértelmezés szerint nincs billentyűparancs hozzárendelve: Másolás a
vágólapra vagy kivágás onnan a végrehajtás előtt megerősítés kérésével.</li>
<li>Not assigned: Shows the clipboard text as HTML in browse mode, or
announces if clipboard is empty or has contents which can't be presented
in a browseable message, for instance if files or folders are been copied
from Windows Explorer.</li>
<li>Not assigned: Shows the textual clipboard contents as plain text in browse
mode, or announces if clipboard is empty or has contents which can't be
presented in a browseable message, for instance if files or folders are
been copied from Windows Explorer.</li>
</ul>
<h2>Clip Contents Designer settings</h2>
<p>This panel is available from NVDA's menu, Preferences submenu, Settings
dialog.</p>
<p>It contains the following controls:</p>
<ul>
<li>Type the string to be used as a separator between contents added to the
clipboard: Allows to set a separator which can be used to find the text
segments once the entire added text is pasted.</li>
<li>Add text before clip data: It's also possible to choose if the added text
will be appended or prepended.</li>
<li>Select the actions which require previous confirmation: You can choose,
for each action available, if it should be performed inmediately or after
confirmation. Available actions are: add text, clear clipboard, emulate
copy and emulate cut.</li>
<li>Request confirmation before performing the selected actions when: You can
select if confirmations will be requested always, just if text is
contained in the clipboard, or if clipboard is not empty (for example if
you've copied a file, not text).</li>
<li>Format to show the clipboard text as HTML in browse mode: If you're
learning HTML markup language, you may choose Preformatted text in HTML or
HTML as shown in a web browser, to have an idea of how your HTML code will
be rendered by NVDA in a browser. The difference between preformatted and
conventional HTML is that the first option will preserve consecutive
spaces and line breaks, and the second one will compact them. For
example, write some HTML tags like h1, h2, li, pre, etc., select and copy
the text to clipboard, and use clipContentsDesigner add-on to show the
text in a browseable message.</li>
<li>Maximum number of characters when showing clipboard text in browse mode:
Please, be aware that increasing this limit may produce issues if the
clipboard contains large strings of text. The default limit is 100000
characters.</li>
<li>Restore defaults.</li>
</ul>
<p>Megjegyzések:</p>
<ul>
<li>Amikor az NVDA egy másik üzenetablaka is nyitva van a bővítmény nem kér
megerősítést a vágólapműveletek előtt, de attól még végrehajtja azokat.</li>
<li>Emulate copy and emulate cut commands mean that, when these features are
enabled, the add-on will take control of control+c and control+x. This
will allow to select if a confirmation should be requested before
performing the actions corresponding to these keystrokes.</li>
</ul>
<h2>Changes for 22.0.0</h2>
<ul>
<li>Added a button to restore defaults in the add-on settings panel.</li>
<li>The add-on cannot be run in secure mode.</li>
</ul>
<h2>Changes for 17.0</h2>
<ul>
<li>Compatible with NVDA 2023.1.</li>
</ul>
<h2>Changes for 16.0</h2>
<ul>
<li>Reqires NVDA 2022.1 or later.</li>
</ul>
<h2>Changes for 15.0</h2>
<ul>
<li>The command to add text to clipboard is again presented in the input
gestures dialog.</li>
<li>Fixed gestures to copy and cut with Persian keyboard, thanks to
Mohammadhosein Ghezelsofla.</li>
</ul>
<h2>Changes for 14.0</h2>
<ul>
<li>Compatible with NVDA 2021.1.</li>
</ul>
<h2>Changes for 13.0</h2>
<ul>
<li>Fixed an issue in visual layout of the settings panel, thanks to Cyrille
Bougot.</li>
<li>Improved documentation.</li>
<li>Added a Clip Contents Designer category to assign input gestures to all
commands available for this add-on.</li>
<li>Fixed bugs when using emulate copy in browsers if focus mode is active.</li>
<li>You can assign different gestures to show the clipboard textual contents
as raw text or formatted in HTML. The Format to show the clipboard text in
the settings panel has being modified accordingly, to select the two
options available for HTML format.</li>
</ul>
<h2>Changes for 12.0</h2>
<ul>
<li>Fixed bugs when using emulate copy in applications like LibreOffice
Writer.</li>
</ul>
<h2>A 11.0 változásai</h2>
<ul>
<li>Most már hozzáfűzhető az áttekintőkurzorral kijelölt szöveg is az NVDA+F9
és NVDA+F10 billentyűparancsok használatával. A korábban használt
NVDA+Windows+F9 parancs már nem használható.</li>
<li>Az NVDA 2019.3 vagy újabb kiadására van szükség.</li>
</ul>
<h2>A 10.0 változásai</h2>
<ul>
<li>Hiba elhárítva: ha a vágólap tartalmát megjelenítő párbeszédablak címe nem
latin betűket tartalmaz</li>
<li>Hiba elhárítva: problémát okozott az emulált másolás és kivágás arab
kiosztású billentyűzeteken</li>
</ul>
<h2>A 9.0 változásai</h2>
<ul>
<li>A vágólap tartalma már megjeleníthető böngészőmódban is</li>
<li>Megerősítés kérhető olyan esetben, ha a vágólap nem üres, de tartalma nem
szöveges, pl. ha egy fájlt vagy mappát másoltunk rá.</li>
<li>Az NVDA 2018.4 vagy újabb kiadása szükséges</li>
</ul>
<h2>A 8.0 változásai</h2>
<ul>
<li>A bővítmény beállításai az NVDA beállításai közt jelennek meg külön
kategóriában</li>
<li>Az NVDA 2018.2 vagy újabb kiadása szükséges</li>
<li>Ha szükséges, letöltheti a <a href="https://www.nvaccess.org/addonStore/legacy?file=ccd-o">legutolsó verziót</a>, ami még támogatja az
NVDA 2017.3 kiadását.</li>
</ul>
<h2>A 7.0 változásai</h2>
<ul>
<li>Amennyiben a bővítmény telepítése során nem állítja be az emulált másolást
és kivágást, akkor nem változik meg a Ctrl+C és Ctrl+X parancsok
hagyományos viselkedése.</li>
</ul>
<h2>A 6.0 változásai</h2>
<ul>
<li>Added options to choose if available actions should be performed after
confirmation.</li>
<li>Added Emulate copy and Emulate cut commands, which could be assigned from
the Input gestures dialog.</li>
<li>Added a dialog to configure the Emulate copy and Emulate cut
functionalities at installation. This allows to add the control+c and
control+x commands to copy and cut, and be asked if you want to replace
the clipboard contents when pressing these keystrokes.</li>
<li>Fixed documentation for script_add (Windows+NVDA+c).</li>
</ul>
<h2>Az 5.0 változásai</h2>
<ul>
<li>Javították a bővítmény párbeszédablakának vizuális megjelenítését.</li>
<li>Az NVDA 2016.4 vagy újabb kiadása szükséges</li>
</ul>
<h2>A 4.0 változásai</h2>
<ul>
<li>A bővítmény beállításai az NVDA konfigurációjában kezelhetők, így a
sztenderd profilokat használhatjuk az elválasztók elmentésére, így a
beállításokat nem kell újra bemásolni az újratelepítéskor történő
importáláskor.</li>
<li>Most már ki lehet választani, hogy a hozzáadni kívánt szöveget a tartalom
elé vagy mögé csatoljuk, ha használjuk a "vágólap tartalma elé"
jelölőnégyzetet a vágólaptartalom-tervező beállítása párbeszédpanelén.</li>
</ul>
<h2>A 3.0 változásai</h2>
<ul>
<li>Ha a MathPlayer telepítve van, a MathMl objektumok braille reprezentációja
kerül hozzáfűzésre a vágólaphoz.</li>
<li>Ha nincs megadva elválasztó karakter, egy üres sor kerül beszúrásra a két
szöveg közé.</li>
<li>Billentyűparancsot adtak hozzá a Vágólaptartalom-tervező beállítás
ablakának eléréséhez.</li>
<li>Hozzáadtak egy jelölőnégyzetet, mellyel szabályozható, hogy az elválasztó
karaktert bemásolja-e a bővítmény a saját beállítások mappájába a későbbi
importáláshoz.</li>
</ul>
<h2>A 2.0 változásai</h2>
<ul>
<li>Hindi karakterek is használhatóak az összefűzött szövegek közötti
elválasztóként.</li>
</ul>
<h2>Az 1.0 változásai</h2>
<ul>
<li><ul>
<li>Első kiadás</li>
</ul>
</li>
</ul>
továbbfejlesztett érintési parancsokhttp://addons.nvda-project.org/addons/enhancedTouchGestures.hu.html2023-05-10T20:38:33Z2014-12-06T20:33:40Z
<ul>
<li>Készítő: Joseph Lee</li>
<li>Letöltés<a href="https://www.nvaccess.org/addonStore/legacy?file=enhancedTouchGestures">stabil verzió</a></li>
<li>NVDA compatibility: 2022.4 and later</li>
</ul>
<p>A kiegészítő kibővíti az NVDA érintőképernyős támogatását, ezen felül
gesztusokat biztosít böngészőmód esetén a navigáció megkönnyítésére.</p>
<p>Note: this add-on requires NVDA 2022.3 or later running on a touchscreen
computer with Windows 10 or 11.</p>
<h2>Parancsok</h2>
<h3>Mindenhol elérhető</h3>
<ul>
<li>Négy ujjas dupla koppintás: Be vagy kikapcsolja a beviteli súgót.</li>
<li>Négy ujjas jobbra pöccintés: Váltás érintőképernyős billentyűzetre
(általában megjeleníti)</li>
<li>Four finger flick left: toggle dictation (Windows+H; Windows 10 Version
1709 or later).</li>
</ul>
<h3>Elem érintőmód</h3>
<ul>
<li>3 ujjas pöccintés lefelé: Az aktuális ablak tartalmának felolvasása.</li>
<li>3 ujjas pöccintés balra: A fókuszban lévő elem bemondása.</li>
<li>3 ujjas pöccintés jobbra: A navigátor kurzor elemének bemondása.</li>
<li>4 ujjas pöccintés fölfelé: Az aktuális ablak címének bemondása.</li>
<li>4 ujjas pöccintés lefelé: Az állapotsor tartalmának bemondása.</li>
</ul>
<h2>Webes érintő mód</h2>
<p>Ez a böngészőmódban elérhető érintési mód lehetővé teszi a dokumentum
kiválasztott elemei közti navigációt. E módot aktiválni egy böngészőmódú
dokumentumban 3 ujjas koppintással lehet. Egyujjas felfelé és lefelé
pöccintéssel lehet váltogatni az egyes elem navigációs módok közül. Egyujjas
jobbra és balra pöccintéssel lehet navigálni az egyes elemek között. Ha
kilép a böngészőmódú dokumentumból, onnantól az Elem érintőmód lesz aktív.</p>
<h2>Beszédszintetizátor érintő mód</h2>
<p>Ezzel a móddal gyorsan változtathat a beszédszintetizátor beállításain, mint
hangkarakter váltása, vagy a hangerő megváltoztatása. Ebben a módban
kétujjas balra, ill. jobbra pöccintéssel választhatja ki a módosítani kívánt
opciót, az értékeket kétujjas felfelé, ill. lefelé pöccintéssel
módosíthatja. Ezek az érintési parancsok tükrözik a beszédszintetizátor
opcióinak módosítására szolgáló billentyűparancsokat.</p>
<h2>Version 23.02</h2>
<ul>
<li>NVDA 2022.4 or later is required.</li>
<li>Windows 10 21H2 (November 2021 Update/build 19044) or later is required.</li>
</ul>
<h2>Version 23.01</h2>
<ul>
<li>NVDA 2022.3 or later is required.</li>
<li>Windows 10 or later is required as Windows 8.1 is no longer supported by
Microsoft as of January 2023.</li>
<li>It is possible to reassign touch keyboard and dictation toggle commands
from input gestures dialog under Enhanced Touch Gestures category.</li>
<li>Removed read-only state workaround for touch keyboard keys as it is
resolved in Windows 10.</li>
</ul>
<h2>Version 22.03</h2>
<ul>
<li>NVDA 2021.3 or later is required.</li>
<li>A warning message will be displayed when attempting to install the add-on
on Windows 7, 8, and 8.1.</li>
</ul>
<h2>Version 21.10</h2>
<ul>
<li>NVDA 2021.2 or later is required due to changes to NVDA that affects this
add-on.</li>
</ul>
<h2>Version 21.08</h2>
<ul>
<li>Initial support for Windows 11.</li>
</ul>
<h2>Version 21.01</h2>
<ul>
<li>NVDA 2020.3 or later is required.</li>
<li>On Windows 10 Version 1709 and later, doing a four finger flick left will
toggle dictation (Windows+H).</li>
<li>Remove dedicated touch interaction support toggle command from the add-on.</li>
<li>As touch interaction support can be toggled from NVDA's touch interaction
settings panel, a dedicated Enhanced Touch Gestures settings panel has
been removed.</li>
</ul>
<h2>Version 20.09</h2>
<ul>
<li>Removed ability to let NVDA turn off touch interaction for up to ten
seconds (touch command passthrough).</li>
<li>Removed coordinate announcement beep feature.</li>
</ul>
<h2>Version 20.07</h2>
<ul>
<li>Added a keyboard command to toggle touch interaction or enable/disable
touch passthrough (Control+Alt+NVDA+T).</li>
<li>As NVDA 2020.1 and later includes a touch command to perform right mouse
click (one finger tap and hold), the command has been removed from this
add-on. AS a result, NVDA 2020.1 or later is required.</li>
<li>The ability to let NVDA turn off touch interaction for up to ten seconds
(touch command passthrough) is deprecated. In the future this feature will
toggle touch interaction instead.</li>
<li>In NVDA development snapshots, due to touch interaction feature changes,
touch command passthrough feature and Enhanced Touch Gestures settings
panel will be disabled. The command used to enable touch command
passthrough will toggle touch interaction instead.</li>
<li>Coordinate announcement beep feature is deprecated and will be removed in
a future add-on release.</li>
<li>Coordinate announcement beep will not be heard while using touch keyboard.</li>
<li>NVDA will no longer appear to do nothing or play error tones while
exploring modern input facility such as emoji panel via touch.</li>
<li>NVDA will present an error message if touch keyboard cannot be activated
(four finger flick right).</li>
</ul>
<h2>Version 20.06</h2>
<ul>
<li>Resolved many coding style issues and potential bugs with Flake8.</li>
</ul>
<h2>Version 20.04</h2>
<ul>
<li>Right mouse click gesture (one finger tap and hold) is now part of NVDA
2020.1.</li>
</ul>
<h2>Version 20.01</h2>
<ul>
<li>NVDA 2019.3 or later is required.</li>
<li>Touch support toggle command (including touch passthrough) will no longer
function if touch support is turned off completely.</li>
</ul>
<h2>Version 19.11</h2>
<ul>
<li>Added input help messages for additional touch commands.</li>
</ul>
<h2>Version 19.09</h2>
<ul>
<li>Touch support can now be disabled from everywhere, not just from profiles
other than normal profile.</li>
</ul>
<h2>Version 19.07</h2>
<ul>
<li>Internal changes to support future NVDA releases.</li>
</ul>
<h2>Version 18.12</h2>
<ul>
<li>Internal changes to support future NVDA releases.</li>
</ul>
<h2>Version 18.08</h2>
<ul>
<li>Compatible with NVDA 2018.3 and future versions.</li>
</ul>
<h2>Version 18.06</h2>
<ul>
<li>Add-on settings is now found in new multi-category NVDA Settings screen
under "Enhanced Touch Gestures" category. As a result, NVDA 2018.2 is
required.</li>
<li>Fixed compatibility issues with wxPython 4.</li>
</ul>
<h2>Version 18.04</h2>
<ul>
<li>Resolves an issue where touch interaction category in NVDA Settings panel
may cause error sounds to be heard due to changes made from this add-on.</li>
</ul>
<h2>Version 18.03</h2>
<ul>
<li>NVDA 2018.1 is required.</li>
<li>Because NVDA 2018.1 comes with touch typing checkbox, the checkbox is no
longer included in this add-on.</li>
</ul>
<h2>Version 17.12</h2>
<ul>
<li>Requires NVDA 2017.4. Specifically, this add-on can now handle
configuration profile switches.</li>
<li>As NVDA 2017.4 includes screen orientation announcement, this feature is
no longer part of this add-on.</li>
<li>Added a hidden checkbox in Touch Interaction dialog to completely disable
touch support (available if profiles other than normal configuration is
active).</li>
<li>If using NVDA 2018.1 or later, Touch Interaction dialog will be listed
twice under NVDA's preferences menu. The second item is the dialog that
comes with the add-on.</li>
<li>In Touch Interaction dialog for the add-on, touch typing mode is no longer
shown if using NVDA 2018.1 or later.</li>
</ul>
<h2>Version 17.10</h2>
<ul>
<li>Due to support policy from Microsoft, Windows 8 (original release) is no
longer supported.</li>
<li>NVDA will no longer announce screen orientation twice when running NVDA
2017.4 development snapshots.</li>
</ul>
<h2>Version 17.07.1</h2>
<ul>
<li>Added an option in touch interaction dialog to manually toggle touch
passthrough without use of a timer.</li>
<li>With manual passthrough mode off, if touch passthrough is turned on before
the passthrough duration expires, touch interaction would be enabled.</li>
</ul>
<h2>Version 17.07</h2>
<ul>
<li>Added a new dialog named Touch Interaction under NVDA's preferences menu
to configure how NVDA works with touchscreens.</li>
<li>After installing this version, when pressing keys on the touch keyboard,
one must double tap the desired key. You can switch back to the old way by
enabling touch typing from Touch Interaction dialog.</li>
<li>Added a command (unassigned) to allow NVDA to ignore touch gestures for up
to 10 seconds.</li>
<li>Added an option in Touch Interaction dialog to allow NVDA to pause touch
interaction between 3 to 10 seconds in order to perform touchscreen
gestures directly (as though NVDA is not running; default is 5 seconds).</li>
<li>Added debug logging messages when performing right clicks (tap and hold)
to be recorded in the NVDA log (requires NVDA 2017.1 or later).</li>
<li>Due to changes made when playing screen coordinates, NVDA 2017.1 or later
is required.</li>
</ul>
<h2>Version 17.03</h2>
<ul>
<li>Fixed an issue where coordinate announcement beep did not play or an error
tone played instead when using NVDA 2017.1 or later.</li>
</ul>
<h2>Version 16.12</h2>
<ul>
<li>Web touch mode works in Microsoft Edge, Microsoft Word and others where
browse mode is used.</li>
<li>Added lists and landmarks to web touch mode elements.</li>
</ul>
<h2>Version 16.06</h2>
<ul>
<li>Initial stable version.</li>
</ul>
NV Speech Player. A Klatt-based speech synthesis engine written in c++http://addons.nvda-project.org/addons/nvSpeechPlayer.hu.html2023-05-10T20:38:33Z2014-08-26T09:28:59Z
<ul>
<li>Author: NV Access Limited</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=nvsp">NV Speech Player for NVDA 2019.3 or higher</a></li>
</ul>
<h2>Áttekintés</h2>
<p>Az NV Speech Player egy ingyenes, nyílt forráskódú kísérleti
beszédszintetizátor az NVDA-hoz. A beszédet az ún. Klatt technológiával
állítja elő, akár csak a Dectalk vagy az Eloquence beszédszintetizátor.</p>
<h2>Licenc és copyright</h2>
<p>NV Speech Player is Copyright (c) 2014 NV Speech Player contributors NV
Speech Player is covered by the GNU General Public License (Version 2). You
are free to share or change this software in any way you like as long as it
is accompanied by the license and you make all source code available to
anyone who wants it. This applies to both original and modified copies of
this software, plus any derivative works. For further details, you can view
the license online at: http://www.gnu.org/licenses/old-licenses/gpl-2.0.html</p>
<h2>Háttér</h2>
<p>A 70-es és 80-as években komoly kutatásokat folytattak a gépi beszédképzés
területén. Az egyik kiemelkedő modell a formáns frekvenciakövetéses
módszeren alapuló beszédképzést alkalmazó ún. Klatt beszédalkotás
volt. Ilyen jól ismert Klatt beszédszintetizátor volt a Dectalk és az
Eloquence. Ezek különösen alkalmasnak bizonyultak a vakok számára, mert
kiemelkedően gyors a válaszidejük, a kiejtésük egyszerű, kiszámítható és
előrelátható, és kevés memóriát foglalnak. Azonban a kutatások más
beszédképzés irányába haladtak, mint például az összefűzéses
beszédképzés. Bár ezek lassabbak voltak, jobban megközelítették az emberi
hangot. Ez előnynek bizonyult a mindennaposan használt alkalmazásokban,
pl. gps-egységekben, telefonrendszerekben, de ez az előny kevésbé szükséges
a vakoknak, akik számára fontosabb a gyors válaszidő, valamint a semleges
kiejtés.</p>
<p>Annak ellenére, hogy az olyan beszédszintetizátorokat, mint a Dectalk és
Eloquence több mint húsz éven át hozzáférhetővé tették és frissítették, mára
beszerzésük nehézkessé vált, az ezeket és különféle változataikat gyártó
cégek szerint elavultak, és többé nem frissítik és forgalmazzák őket.</p>
<p>Az emberi hangmintákon alapuló, összefűzéses beszédképzés csak mostanában
kezd abba a szakaszba jutni, hogy szóba jöhessen a régebbi technológiák
felváltása; csak mostanában számolnak azzal, hogy a gyors válaszidővel és a
semleges, kielégítő kiejtéssel képesek lesznek felváltani azokat. Azonban a
ma kapható szintetizátorok egy része nem éri el a kielégítő minőséget,
másrészt pedig drágák.</p>
<p>A Dectalk és az Eloquence zárt forráskódú kereskedelmiszoftverek
voltak. Ennek ellenére a fejlesztő közösség számára van elegendő használható
forráskód és kutatási anyag a Klatt beszédképzés megvalósítására. Az NV
Speech Player megkísérli ezeket az előnyöket kihasználni, és egy új
generációs Klatt beszédszintetizátorrá válni annak reményében, hogy alkalmas
lesz felváltani a Dectalkot vagy az Eloquence-t, vagy hogy legalább alkalmas
legyen arra, hogy újraindítsa a kutatásokat, vagy felélessze az e
beszédképzési módszerrel kapcsolatos eszmecserét.</p>
<p>Az Espeak beszédszintetizátor, mely egy nyílt forráskódú szoftver, már
önmagában is bizonyította, hogy e közösségben alternatívája az említett
szoftvereknek, azonban sokan, akik hallották, nagyon hamar rámutattak arra,
hogy az Espeak a fémes, rideg hangja miatt nem tűnik használhatónak. Annak
ellenére, hogy az NV Speech Player fejlesztői is az Espeaket részesítik
előnyben, próbálják megérteni, hogy mi az oka ennek az erős ellenállásnak,
és érzik annak szükségét, hogy valamit tenni kell az Espeak
beszédszintézisével, vagy a Klatt szintézissel. Kezdeni kell valamit azzal a
helyzettel, hogy az összefűzéses beszédképzés során emberi hangmintákat
gyűjtenek, és sokkal jobban érthető, ha ezeket illesztik a beszédfolyamba.</p>
<h2>Kódolás</h2>
<p>The synthesis engine itself is written in C++ using modern idioms, but
closely following the implementation of klsyn-88, found at
http://linguistics.berkeley.edu/phonlab/resources/</p>
<p>eSpeak is used to parse text into phonemes represented in IPA, making use of
existing eSpeak dictionary processing. eSpeak can be found at:
http://espeak.sourceforge.net/</p>
<p>The Klatt formant data for each individual phoneme was collected mostly from
a project called PyKlatt: http://code.google.com/p/pyklatt/ However it has
been further tweaked based on testing and matching with eSpeak's own data.</p>
<p>Azok a szabályok, melyek a nyelvi jelek hosszát, szüneteit, gyorsaságát és
kiejtését adják meg, kézzel pythonban lettek megírva, csupán az Espeak saját
hanglejtési adatai másolását kísérelték meg olyan mértékben, amennyire csak
lehetséges.</p>
<h2>Az NV Speech Player elkészítése</h2>
<p>You will need: - Python 3.7: http://www.python.org - SCons 3:
http://www.scons.org/ - Visual Studio 2019 Community</p>
<p>A futtatható változat elkészítéséhez futtassa a Scons nevű szoftvert!</p>
<p>A folyamat létrehoz egy nvSpeechPlayer_xxx.nvda-addon fájlt a
gyökérkönyvtárban, az xxx a "git revision" vagy a "hardcoded" verzió számát
jelenti. Ha telepíti ezt a bővítményt az NVDA-ba, használhatja a Speech
Player beszédszintetizátort aképernyőolvasójában. A bővítményben benne van
minden szoftverösszetevő, további dll vagy egyéb fájlokat már nem kell
másolni.</p>
Bit Chehttp://addons.nvda-project.org/addons/bitChe.hu.html2023-05-10T20:38:33Z2013-12-06T10:30:33Z
<ul>
<li>Készítők: Alberto Zanella, Alberto Buffolino és más közreműködők</li>
<li><a href="https://www.nvaccess.org/addonStore/legacy?file=bc">stabil verzió</a> letöltése</li>
<li><a href="https://www.nvaccess.org/addonStore/legacy?file=bc-dev">fejlesztői verzió</a> letöltése</li>
</ul>
<p>A Bit Che egy egyszerű program, amivel könnyen kereshet a népszerű torrent
oldalakon fájlokat. Bővebb információt a szoftverről <a href="https://www.convivea.com">ezen az oldalon</a>
talál.</p>
<p>Ez az NVDA kiegészítő javítja a program használhatóságát. A következő
funkciókat adja hozzá:</p>
<ul>
<li>Akadálymentessé teszi a találati listát.</li>
<li>Egy kijelölt elemen megnyomva a menügombot aktiválhatja a fókuszban lévő
elem helyi menüjét.</li>
</ul>
<h2>Megjegyzések</h2>
<ul>
<li>A találati listán a fel és le nyilak segítségével választhatja ki a
megfelelő elemet.</li>
<li>Amikor az első keresés megtörténik a program elindulása után, az első
találati elem lesz a fókuszban, akkor is, ha nem jelölte ki. Használja
az általános billentyűparancsokat vagy a nyíl billentyűket, és
bizonyosodjon meg arról, hogy a megfelelő elem van kijelölve, mielőtt
bármilyen egyéb műveletet elvégezne.</li>
</ul>
<h2>Billentyűparancsok</h2>
<ul>
<li>Menügomb vagy shift+f10, megnyitja a kijelölt elem helyi menüjét.</li>
</ul>
<h2>A 2.0 változásai</h2>
<ul>
<li>A kiegészítő súgója elérhető a Bővítmények kezelése menüből is.</li>
</ul>
<h2>Az 1.5 változásai</h2>
<ul>
<li>Frissített fordítások</li>
</ul>
<h2>Az 1.4 változásai</h2>
<ul>
<li>A fejlesztői verzió letöltési linkjének hozzáadása.</li>
</ul>
<h2>Az 1.3 változásai</h2>
<ul>
<li>Mostantól, ha egy régebbi verzió telepítve van, azt jelzi és eltávolítja
a kiegészítő.</li>
</ul>
<h2>Az 1.2 változásai</h2>
<ul>
<li>A shift+f10 billentyűparancs hozzáadása</li>
</ul>
<h2>Az 1.1 változásai</h2>
<ul>
<li>Javult a keresési eredmények listájának akadálymentes hozzáférhetősége.</li>
</ul>
<h2>Az 1.0 változásai</h2>
<ul>
<li>Első kiadás</li>
</ul>
Hírcsatorna-olvasóhttp://addons.nvda-project.org/addons/readFeeds.hu.html2024-02-13T14:37:06Z2013-11-16T13:45:30Z
<ul>
<li>Authors: Noelia Ruiz Martínez, Mesar Hameed</li>
</ul>
<p>Ez a kiegészítő lehetővé teszi, hogy az NVDA használatával közvetlenül is
lehessen Atom és RSS hírcsatornákat olvasni. A hírcsatornák nem frissülnek
automatikusan. Az alábbiakban a hírcsatorna megnevezés egyaránt utal az Atom
és RSS hírcsatornákra is.</p>
<h2>Commands</h2>
<h3>Read Feeds dialog</h3>
<p>You can access the Read Feeds dialog from the nvda menu, Tools submenu,
Feeds item.</p>
<p>It contains the following controls:</p>
<ul>
<li>Filter by: An edit box to search previously saved feeds.</li>
<li>A list of the saved feeds, focused when the dialog is opened.</li>
<li>List of articles: Opens a dialog which presents the articles list from
your current feed. Select the article you want to read and press Enter or
Open web page of selected article button to open the corresponding page in
your browser. Press About article button to open a dialog showing title
and link of the selected article; from this dialog, you'll be able to copy
this info to the clipboard.</li>
<li>Open feed: Opens the selected feed in the default application.</li>
<li>Open feed as HTML: Opens the selected feed in the default web browser. You
will be able to show or hide publication dates and buttons to copy
information about articles to clipboard.</li>
<li>Copy feed address: Opens a dialog to confirm if you want to copy the feed
address to clipboard.</li>
<li>New: Opens a dialog with an edit box to enter the address of a new
feed. If the address is valid and the feed can be saved, its name, based
on the feed title, will appear at the bottom of the feeds list.</li>
<li>Rename: Opens a dialog with an edit box to rename the selected feed.</li>
<li>Delete: Opens a dialog to delete the selected feed after confirmation.</li>
<li>Set default: Sets the selected feed as the default, so that its articles
can be accessed with NVDA's gestures.</li>
<li>Import feeds from OPML file: Opens a dialog to add new feeds from an OPML
file.</li>
<li>Save feeds to OPML file: Opens a dialog to save the feeds available from
the Feeds dialog in an OPML file.</li>
<li>Preferences: Opens the settings dialog for readFeeds, also available in
NVDA's menu, Preferences, settings, readFeeds category.</li>
<li>Close: Closes the Feeds dialog.</li>
</ul>
<h3>Notes</h3>
<ul>
<li>The Filter by edit box can be placed after the Open article button from
NVDA's menu, Preferences, Settings, Read feeds category, or pressing the
Preferences button of the Feeds dialog.</li>
<li>This panel has an option to show article dates on the List of articles
dialog.</li>
</ul>
<h3>Keyboard commands</h3>
<ul>
<li>Ctrl+Shift+NVDA+Space: Announces current article's URL. Pressing twice
will open the web page.</li>
<li>Ctrl+Shift+NVDA+8: Refreshes the selected feed and announces its most
recent title.</li>
<li>Ctrl+Shift+NVDA+I: Announces current feed title and link. Pressing twice
will copy the title and related link to clipboard.</li>
<li>Ctrl+Shift+NVDA+U: Announces previous feed title.</li>
<li>Ctrl+Shift+NVDA+O: Announces next feed title.</li>
</ul>
<h2>Notifications</h2>
<ul>
<li>When the title or URL have been copied.</li>
<li>When unable to connect/refresh a feed, or the URL does not correspond to a
valid feed.</li>
<li>NVDA will display an error message if a new feed cannot be created.</li>
<li>The title of the articles list dialog displays the selected feed name and
number of items available.</li>
</ul>
<h2>Changes for 21.0</h2>
<ul>
<li>Feeds with untitled articles can be presented in the Articles dialog, and
opened as HTML.</li>
</ul>
<h2>Changes for 20.0</h2>
<ul>
<li>universalFeedParser is updated to 5.0.1, adding support for more feeds.</li>
</ul>
<h2>Changes for 14.0</h2>
<ul>
<li>Fixed a bug that made impossible to add some feeds.</li>
</ul>
<h2>Changes for 13.0</h2>
<ul>
<li>The add-on cannot be used on secure screens.</li>
<li>Feeds are managed from OPML files.</li>
<li>Due to changes in the feeds management system, there are changes in the
configuration file where the default feed is set. Please, use the Feeds
dialog if you want to set it again.</li>
<li>Your old text files used in previous versions will be automatically
imported into the new OPML format when the add-on is started.</li>
<li>The copy and restore feeds feature has been replaced with the ability to
import from and save to OPML files.</li>
<li>Non well-formed feeds can be processed before being added to make them
compatible with the add-on.</li>
<li>In the Read Feeds settings panel, a new option allows to show article
dates on the List of articles dialog.</li>
</ul>
<h2>Changes for 12.0</h2>
<ul>
<li>Fixed a bug which made shortcuts for items of NVDA's tools menu don't work
as expected.</li>
</ul>
<h2>Changes for 11.0</h2>
<ul>
<li>Compatible with NVDA 2021.1</li>
</ul>
<h2>Changes for 10.0</h2>
<ul>
<li>Added a button to open the selected feed as HTML in the default web
browser.</li>
<li>If a new feed cannot be created, this will be notified in an error dialog.</li>
<li>Improved order and presentation of some articles.</li>
<li>More feeds may be supported.</li>
<li>When the feeds dialog is opened, the list of feeds will be focused instead
of the search edit box.</li>
<li>You can choose if the search edit box is placed after the list of feeds,
useful to focus the list even when switching from another window without
closing the Feeds dialog.</li>
<li>Added a button to copy the feed address to clipboard from the feeds
dialog.</li>
</ul>
<h2>Changes for 9.0</h2>
<ul>
<li>Requires NVDA 2019.3 or later.</li>
</ul>
<h2>Changes for 8.0</h2>
<ul>
<li>When the add-on is updated, feeds saved in the previous version of the
add-on will be automatically copied to the new version, unless you prefer
to import feeds saved in the main configuration folder of NVDA.</li>
<li>When using the dialog to copy feeds, if the chosen folder is not named
personalFeeds, a subfolder with this name will be created to prevent the
deletion of directories containing important data, such as Documents or
Downloads.</li>
</ul>
<h2>Changes for 7.0</h2>
<ul>
<li>The Feeds dialog includes a button to open a folder which may contain a
backup of feeds.</li>
<li>When using the edit box to filter feeds, if no results are found, the list
of feeds and other controls are disabled, so that NVDA doesn't report
"unknown" in the empty list.</li>
<li>If the list of articles dialog can't be shown, for example due to errors
in the feed, NVDA will raise an error, so that the feeds dialog can be
used without restarting NVDA.</li>
</ul>
<h2>Changes for 6.0</h2>
<ul>
<li>When the default feed has been updated and it stops working due to server
issues, the previous articles aren't deleted and can be read with the
corresponding keystrokes.</li>
<li>Fix regression: The default feed can be updated twice again.</li>
</ul>
<h2>Changes for 5.0</h2>
<ul>
<li>The articles list dialog has been enhanced.</li>
<li>Compatible with NVDA 2018.3 or later (required).</li>
<li>If needed, you can download the <a href="https://www.nvaccess.org/addonStore/legacy?file=rf-o">last version compatible with NVDA
2017.3</a>.</li>
</ul>
<h2>Changes for 4.0</h2>
<ul>
<li>Added a button to open the selected feed from the Feeds dialog.</li>
</ul>
<h2>Changes for 3.0</h2>
<ul>
<li>The dialogs to manage feed files have been removed. Now their
functionality is included in the Feeds dialog.</li>
<li>The visual presentation of the dialogs has been enhanced, adhering to the
appearance of the dialogs shown in NVDA.</li>
<li>The default feed is saved on the NVDA's configuration. Therefore, it's
possible to set different default feeds in configuration profiles.</li>
<li>Requires NVDA 2016.4.</li>
</ul>
<h2>A 2.0 verzió változásai:</h2>
<ul>
<li>Add-on help is available from the Add-ons Manager.</li>
</ul>
<h2>Az 1.0 verzió változásai:</h2>
<ul>
<li>Initial version.</li>
</ul>
GoldWavehttp://addons.nvda-project.org/addons/goldwave.hu.html2023-05-10T20:38:33Z2013-11-04T09:15:31Z
<ul>
<li>Készítők: Joseph Lee, NVDA közreműködők</li>
<li><a href="https://www.nvaccess.org/addonStore/legacy?file=goldwave">Stabil verzió</a></li>
<li>NVDA compatibility: 2022.4 and later</li>
</ul>
<p>This app module enhances access and usage of GoldWave audio editor.</p>
<h2>Gyorsbillentyűk</h2>
<ul>
<li>NVDA+Shift+C: Toggles speaking of commands during audio editing.</li>
<li>Control+Shift+P: Az aktuális sávpozíció bemondása.</li>
<li>NVDA+Shift+R: Bemondja a szerkesztés alatt lévő sávból hátra lévő időt.</li>
<li>Control+NVDA+1: A szerkesztés alatt álló csatorna bemondása.</li>
<li>Control+NVDA+2: A hangfájl teljes hosszának bemondása.</li>
<li>Control+NVDA+3: announces a summary on audio selection information.</li>
<li>Control+NVDA+4: A nagyítási szint bemondása.</li>
</ul>
<p>For more information about GoldWave and keyboard commands, refer to GoldWave
Manual.</p>
<p>Note: GoldWave 6 or later is required.</p>
<h2>Version 23.02</h2>
<ul>
<li>NVDA 2022.4 or later is required.</li>
<li>Windows 10 21H2 (November 2021 Update/build 19044) or later is required.</li>
</ul>
<h2>Version 23.01</h2>
<ul>
<li>NVDA 2022.3 or later is required.</li>
<li>Windows 10 or later is required as Windows 7, 8, and 8.1 are no longer
supported by Microsoft as of January 2023.</li>
</ul>
<h2>Version 22.03</h2>
<ul>
<li>NVDA 2021.3 or later is required.</li>
<li>A warning message will be displayed when attempting to install the add-on
on Windows 7, 8, and 8.1.</li>
</ul>
<h2>Version 21.10</h2>
<ul>
<li>NVDA 2021.2 or later is required due to changes to NVDA that affects this
add-on.</li>
<li>In GoldWave 6.57 and later, NVDA will no longer repeat the name of the
loaded file when pressing play/rewind/stop keys.</li>
</ul>
<h2>Version 21.06</h2>
<ul>
<li>Resolved additional coding style issues and potential bugs with Flake8.</li>
</ul>
<h2>Version 20.06</h2>
<ul>
<li>Resolved many coding style issues and potential bugs with Flake8.</li>
</ul>
<h2>Version 20.04</h2>
<ul>
<li>Added input help messages for remainig time command (NVDA+Shift+R).</li>
<li>Toggle command announcement command (NVDA+Shift+C) will now show up under
"GoldWave" category in NVDA's input gestures dialog.</li>
</ul>
<h2>Version 20.01</h2>
<ul>
<li>Requires NVDA 2019.3 or later.</li>
</ul>
<h2>Version 19.11</h2>
<ul>
<li>Windows 7 SP1, GoldWave 6.x, and NVDA 2019.1 or later is required.</li>
<li>Added help message for sound window (accessible if Control Usage Assistant
add-on is installed).</li>
</ul>
<h2>Version 18.12</h2>
<ul>
<li>NVDA will no longer appear to do nothing or play error tones when
performing certain GoldWave commands with command announcement set to off
(this may result in odd behaviors in some cases).</li>
<li>Internal changes to support future NVDA releases.</li>
</ul>
<h2>Version 18.07</h2>
<ul>
<li>Fixed an issue where leading zeroes would not be displayed when trying to
obtain remaining time for a trakc.</li>
</ul>
<h2>Version 17.05</h2>
<ul>
<li>Added ability to provide debug information when NVDA is running with debug
logging enabled (NVDA 2017.1 or later).</li>
<li>Updated translations.</li>
</ul>
<h2>Version 16.12</h2>
<ul>
<li>Version scheme is now year.month instead of major.minor.</li>
</ul>
<h2>A 4.0 verzió változásai</h2>
<ul>
<li>A bővítmény tárolóját áthelyezték a GitHubra (jelenleg a
https://github.com/josephsl/goldwave webhelyen található).</li>
<li>Performance improvements when looking up information such as channel name
and other status information.</li>
</ul>
<h2>A 3.0 verzió változásai</h2>
<ul>
<li>Added a command to announce remaining time for the current track
(NVDA+Shift+R).</li>
<li>Kissebb javítások történtek az állapot információk bemondásában, úgy mint
csatorna információk.</li>
</ul>
<h2>A 2.0 verzió változásai</h2>
<ul>
<li>A GoldWave 6 támogatása, beleértve a 64-bites változatot is. (Lásd a fenti
megjegyzést!).).</li>
<li>A kiegészítő súgója már elérhető az NVDA Bővítménykezelő
párbeszédpanelén. NVDA 2014.3 és újabb verziói esetén.</li>
<li>Az NVDA már bejelenti a kiválasztott csatornát csatornák kijelölésére
szolgáló parancsok használatakor (Control+Shift+L a bal oldali csatorna
kijelöléséhez).</li>
<li>Különböző számokkal dolgozó szerkesztőmezőkkel (szűrőmező, vagy
időválasztó a mix párbeszédpanelen) kapcsolatos hiba javítva, beleértve
szöveg kijelölése, érték módosítása, stb.</li>
<li>A parancsok bejelentésére vonatkozó beállítás más programokra váltás
esetén is megmarad.</li>
</ul>
<h2>Az 1.2 verzió változásai</h2>
<ul>
<li>Kijavításra került az a hiba, mely néhány szerkesztő mező bemondásakor
lépett fel.</li>
<li>Új, és frissített fordítások.</li>
<li>Kérjük, vegye figyelembe, hogy a legújabb NVDA változások miatt, az audio
kijelölés és egyéb státusz billentyűparancsok nem minden rendszeren
működnek megfelelően.</li>
</ul>
<h2>Az 1.1 verzió változásai</h2>
<ul>
<li>Támogatott az üzenetek Braille megjelenítése</li>
<li>A kijelölt hang tulajdonságai már nem csak angol nyelven elérhetők.</li>
<li>Több parancs bemondása hozzáadva, köztük a hellyelző mozgása, törlés/trim
műveletek.</li>
<li>Hibajavítás a numerikus szerkesztőmezőkben, olykor hibás mező megnevezés
került bemondásra.</li>
<li>Új, és frissített fordítások.</li>
</ul>
<h2>Az 1.0 verzió változásai</h2>
<ul>
<li>Kezdeti verzió.</li>
</ul>
Hangulatjelekhttp://addons.nvda-project.org/addons/emoticons.hu.html2024-03-10T17:55:46Z2013-10-21T09:28:36Z
<ul>
<li>Authors: Chris Leo, Noelia Ruiz Martínez, Mesar Hameed, Francisco Javier
Estrada Martínez</li>
</ul>
<p>Using this add-on, spoken text containing emoticon characters will be
replaced by its more human friendly description.</p>
<p>For example: the sequence ":)" will be spoken as "smiling smiley", or for
example NVDA will recognize the meaning of each emoji.</p>
<p>A következő lehetőségek állnak rendelkezésére:</p>
<h2>Insert Emoticon</h2>
<p>Sometimes an image is worth a 1000 words: use the new emoji to liven up your
instant message and to let your friends know how you’re feeling.</p>
<p>When you are unsure of the characters for a particular smiley, this addon
enables you to select and insert it into your text such as in a chat.</p>
<p>Press NVDA+I, or from menu Tools -> Emoticons > Insert emoticon, to open a dialog with the provided emoticons or emoji.</p>
<p>This dialog allows you to choose an emoticon and to view the emoticons that
interest you:</p>
<ul>
<li>An editable field allows you to filter the search for the desired emoticon
among the emoticons available.</li>
<li>Through a set of radio buttons, you can choose to view only emoji category
(alt+E) or view only standard emoticon category (alt+s) or view all
emoticons available (alt+A).</li>
<li>In the list of emoticons (alt+L) are displayed on three columns
respectively: the name of emoticon, the type of emoticon (standard
emoticon or emoji), the corresponding character.</li>
</ul>
<p>When you press OK, the characters for the chosen emoticon will be copied to
your clipboard, ready for pasting.</p>
<h2>Insert symbol</h2>
<p>This dialog allows you to choose one of the symbols available in the
Punctuation/symbol pronunciation dialog of NVDA. You can use the Filter edit
box or the arrow keys to select an item from the symbols list.</p>
<p>If you want to copy various symbols, use the Add button to append them to
the Symbols to copy edit box.</p>
<p>Then, press OK and the selected emoji or symbol, or the symbols contained in
the mentioned edit box, will be copied to your clipboard, ready for pasting.</p>
<h2>Associate gestures to symbols</h2>
<p>From NVDA's menu, Preferences submenu, Input gestures dialog, category
Insert symbols, you can configure NVDA to type symbols through associated
gestures.</p>
<p>You can use the Edit field edit box to reduce the number of symbols
presented, so that this category can be expanded faster.</p>
<h2>Emoticons dictionary</h2>
<p>Emoticons add-on allows to have differents speech-dictionaries using
configuration profiles.</p>
<p>This means that you can create or edit a specific speech-dictionary for each
your custom profile.</p>
<p>From NVDA MENU, Preferences -> Speech dictionaries -> Emoticons dictionary, you can open a dialog to add or to edit available emoticons.</p>
<p>Saving your customizations, the new reading settings of emoticons will only
apply to the profile you are currently editing.</p>
<p>For example, you may wish that NVDA spoken custom emoticons only in XxChat
program, but not in other chat programs: you can do this by creating a
profile for the XxChat application and assign to it a speech dictionary from
Speech dictionaries menu, Emoticons dictionary option. See below for
Emoticons settings in relation to the configuration profiles.</p>
<p>You can also export each custom speech-dictionary pressing "Save and export
dictionary" button: in this way your speech-dictionaries will be saved in
your user config folder, speechDicts/emoticons subfolder.</p>
<p>The exact name and location of the dictionary file will be based on the
editing configuration profile, which will be shown in the title of the
Emoticons dictionary dialog.</p>
<h2>Emoticons settings</h2>
<p>From menu Preferences -> Settings -> Emoticons opens a panel to configure the activation of your speech-dictionaries for each profile.</p>
<p>In Emoticons settings panel you can choose whether or not speech-dictionary should automatically activate when NVDA switches to the profile you are currently editing. By default it is disabled in normal configuration of NVDA and in all your new profiles.</p>
<p>Moreover, it's possible to determine if the add-on emojis should be
spoken. This could be useful to preserve symbols speaking if emojis are
included in NVDA's configuration.</p>
<p>If you may wish to keep clean your configuration folders, in this dialog it
is also possible to choose if dictionaries not used (associated with non
existing profiles) will be removed from the add-on when it is unloaded.</p>
<h2>Billentyű parancsok:</h2>
<p>These are the key commands available by default, you can edit those or add
new key to open Emoticons settings panel or Emoticon Dictionary dialog:</p>
<ul>
<li>NVDA+E: speaking emoticons on/off, toggles between speaking text as it is
written, or with the emoticons replaced by the human description.</li>
<li>NVDA+I: show a dialog to select an emoticon you want to copy.</li>
<li>Not assigned: show a dialog to select an NVDA's symbol you want to copy.</li>
<li>Not assigned: open a browseable message showing the symbol where the
review cursor is positioned, so that the whole description can be reviewed
in browse mode.</li>
<li>Not assigned: open a browseable message showing the symbol where the caret
is positioned, so that the whole description can be reviewed in browse
mode.</li>
</ul>
<p>Note: On Windows 10 and higher, it's also possible to use the built-in emoji
panel.</p>
<h2>Changes for 22.0.0</h2>
<ul>
<li>Requires NVDA 2023.2 or later.</li>
</ul>
<h2>Changes for 17.0</h2>
<ul>
<li>Added ability to associate gestures to type symbols.</li>
<li>Added ability to copy various symbols at the same time.</li>
</ul>
<h2>Changes for 16.0</h2>
<ul>
<li>Compatible with NVDA 2023.1.</li>
</ul>
<h2>Changes for 15.0</h2>
<ul>
<li>Requires NVDA 2022.1 or later.</li>
<li>Cannot be used in secure mode.</li>
</ul>
<h2>Changes for 14.0</h2>
<ul>
<li>Compatible with NVDA 2021.1.</li>
</ul>
<h2>Changes for 13.0</h2>
<ul>
<li>Fixed errors in Insert Emoticon dialog.</li>
<li>Added a dialog to insert a symbol available in the Punctuation/symbol
pronunciation of NVDA.</li>
</ul>
<h2>Changes for 12.0</h2>
<ul>
<li>Requires NVDA 2019.3 or later.</li>
</ul>
<h2>Changes for 11.0</h2>
<ul>
<li>When the add-on is updated, dictionaries saved in the previous version of
the add-on will be automatically copied to the new version, unless you
prefer to import dictionaries saved in the main dictionaries folder of
NVDA.</li>
<li>When showing the symbol where the caret or the review cursor are
positioned, the words Character and Replacement are used to distinguish
between the symbol itself and its description in browse mode, useful for
speech users.</li>
</ul>
<h2>Changes for 10.0</h2>
<ul>
<li>Added commands to show the symbol where the review cursor or caret are
positioned. Gestures for these commands can be assigned from the Input
gestures dialog, Text review category.</li>
</ul>
<h2>Changes for 9.0</h2>
<ul>
<li>Added the possibility of choosing if add-on emojis should be spoken.</li>
<li>Used appropiate encoding for dictionary names, fixing errors when they
contain certain characters.</li>
<li>The translated summary of the add-on is properly used for the title
presented in add-on help, accessible from the add-on manager.</li>
<li>Added a note mentioning the emoji panel available on Windows 10.</li>
</ul>
<h2>Changes for 8.0</h2>
<ul>
<li>Compatible with NVDA 2018.3 or later (required).</li>
</ul>
<h2>Changes for 7.0</h2>
<ul>
<li>The Activation settings dialog has been moved to a panel in NVDA settings,
so that the current profile will be shown in the title of the NVDA
settings dialog.</li>
<li>The Manage Emoticons menu has been removed: now Insert emoticon will be
found under the Tools menu, and Customize Emoticons will be shown under
Speech dictionaries like Emoticons dictionary.</li>
<li>Requires NVDA 2018.2 or later.</li>
<li>If needed, you can download the <a href="https://www.nvaccess.org/addonStore/legacy?file=emo-o">last version compatible with NVDA
2017.3</a>.</li>
</ul>
<h2>Changes for 6.0</h2>
<ul>
<li>Added support for configuration profiles.</li>
<li>In NVDA 2017.4 or later, the configuration settings and custom
dictionaries will change automatically according with the selected
profiles. In 2017.3 or earlier, you can apply changes by reloading plugins
(pressing control+NVDA+f3).</li>
<li>If you choose to import settings when updating the add-on, deprecated
files (emoticons.ini and emoticons.dic) will be removed or adapted to this
version.</li>
</ul>
<h2>Changes for 5.0</h2>
<ul>
<li>Added support for emojis.</li>
<li>Improvements for Insert Emoticon dialog with a filter field and radio
buttons to choose displayed emoticons.</li>
<li>Using guiHelper for Activation settings dialog and Insert Emoticon dialog:
requires NVDA 2016.4 or higher versions</li>
</ul>
<h2>A 4.0 változásai</h2>
<ul>
<li>Ha a hangulatjel ablaka nyitva van és megnyílik egy másik NVDA beállítás
ablaka, már megjelenik az ekkor szokásos hibaüzenet.</li>
</ul>
<h2>A 3.0 változásai</h2>
<ul>
<li>A hangulatjelek testreszabása párbeszédablakon lehetőség van egy kifejezés
egyezésének meghatározására, úgy mint a kivételszótár használata esetén az
NVDA 2014.4-ben.</li>
</ul>
<h2>A 2.0 változásai</h2>
<ul>
<li>A kiegészítő súgója elérhető a Bővítménkezelő ablakában.</li>
</ul>
<h2>Az 1.1 változásai</h2>
<ul>
<li>Eltávolításra került egy duplikált hangulatjel.</li>
<li>Néhány hangulatjel hozzáadása</li>
</ul>
<h2>Az 1.0 változásai</h2>
<ul>
<li>Első verzió</li>
</ul>
eMulehttp://addons.nvda-project.org/addons/eMule.hu.html2024-03-10T18:42:51Z2013-08-04T11:54:04Z
<ul>
<li>Készítők: Noelia, Chris, Alberto.</li>
</ul>
<p>This add-on helps to improve accessibility of eMule with nVDA. It also
provides additional keyboard commands for moving in different windows and
gives Useful information about eMule.</p>
<p>It's based on the eMuleNVDASupport add-on, developed by the same author. You
should uninstall that old add-on to use this one, since both have common
keystrokes and features.</p>
<p>Tested on <a href="https://www.emule-project.net">eMule</a> 0.50a.</p>
<h2>Billentyűparancsok:</h2>
<ul>
<li>control+shift+h: az egérkurzort és a fókuszt a fő eszköztárhoz helyezi.</li>
<li>control+shift+t: felolvassa az aktuális ablakot.</li>
<li>control+shift+n: a fókuszt a keresőablak Név mezőjére helyezi.</li>
<li>control+shift+p: a fókuszt a keresőablak paraméterlistájához, vagy a
szerkesztőmező beállításaihoz helyezi.</li>
<li>control+shift+b: a fókuszt az aktuális ablakban elérhető listára
helyezi. Ez hasznos a keresési ablakban, a letöltéseknél az átvitel
ablakban, stb.</li>
<li>control+shift+o: A fókuszt az aktuális ablakban elérhető csak olvasható
szerkesztőmezőre helyezi. Például IRC fogadott üzenetek, elérhető
szerverek, stb.</li>
<li>control+NVDA+f: Ha a kurzor egy csak olvasható szerkesztőmezőn áll,
megnyit egy keresőablakot.</li>
<li>control+shift+l: A navigátor- és az egérkurzort az aktuális lista
fejlécéhez helyezi.</li>
<li>control+shift+q: felolvassa az első elemet az állapotsoron, mely a
legutóbbi tevékenységről tájékoztat.</li>
<li>control+shift+w: felolvassa a második elemet az állapotsoron, mely a
jelenlegi kiszolgáló fájlokkal és felhasználókkal kapcsolatos információit
tartalmazza.</li>
<li>control+shift+e: felolvassa a harmadik elemet az állapotsoron, mely a le-
és feltöltési sebességet tartalmazza.</li>
<li>control+shift+r: felolvassa a negyedik elemet az állapotsoron, mely az
eD2K és Kad hálózatok kapcsolódási állapotát tartalmazza.</li>
</ul>
<h2>Oszlopok kezelése.</h2>
<p>Egy oszlopokat tartalmazó listában általában az alt+control+nyíl billentyűk
használhatóak sor és oszlop navigációhoz. Ebben a kiegészítőben a következő
parancsok is elérhetőek:</p>
<ul>
<li>nvda+control+1-0: felolvassa az első 10 oszlopot.</li>
<li>nvda+shift+1-0: Felolvassa a 11-től 20-ig található oszlopokat.</li>
<li>nvda+shift+C: az utoljára felolvasott oszlop tartalmát a vágólapra
másolja.</li>
</ul>
<h2>Changes for 7.0</h2>
<ul>
<li>Compatible with NVDA 2023.1.</li>
</ul>
<h2>Changes for 6.0</h2>
<ul>
<li>Requires NVDA 2022.1 or later.</li>
</ul>
<h2>Changes for 5.0</h2>
<ul>
<li>Compatible with NVDA 2021.1.</li>
</ul>
<h2>Changes for 4.0</h2>
<ul>
<li>Requires NVDA 2019.3 or later.</li>
</ul>
<h2>A 3.0 verzió változásai</h2>
<ul>
<li> To search text in the readonly edit boxes, the find dialog can be used,
such as nvda+control+f to activate the find dialog.</li>
</ul>
<h2>Az 2.0 verzió változásai</h2>
<ul>
<li> A kiegészítő súgója elérhető a Bővitménykezelő párbeszédablakából is.</li>
</ul>
<h2>Az 1.2 verzió változásai</h2>
<ul>
<li> Amikor az IRC üzeneteken navigálunk, a kijelölt szöveg felolvasásra
kerül.</li>
<li> A billentyűparancs, amely eddig a fókuszt csak a keresési találatok
listájára helyezte, most már bármilyen, az aktuális ablakban elérhető
listára át tudja helyezni azt.</li>
<li> A parancs, ami eddig csak az IRC üzenetekre helyezte át a fókuszt,
immáron bármely más csak olvasható szerkesztőmezőre is át tudja helyezni
azt, ezáltal lehetővé vált a kapcsolódási információk áttekintése a
szerverek ablakában.</li>
<li> Amikor az egér és a fókusz az eszköztárra került, némely esetben az
információ kétszer került kimondásra. A hiba kijavításra került.</li>
</ul>
<h2>Az 1.1 verzió változásai</h2>
<ul>
<li> Javítva az Emule elem a súgó menüben, hiba történt ha a felhasználói
konfigurációs fájl nem latin karaktereket tartalmazott.</li>
<li> A billentyűparancsok átállíthatóak a beviteli parancsok párbeszédablakán.</li>
</ul>
<h2>Az 1.0 verzió változásai</h2>
<ul>
<li> Az első kiadás.</li>
</ul>
Fókuszkiemelőhttp://addons.nvda-project.org/addons/focusHighlight.hu.html2023-05-10T20:38:33Z2013-08-04T06:59:50Z
<ul>
<li>Authors: Takuya Nishimoto, Karl-Otto Rosenqvist</li>
<li>Letöltés <a href="https://www.nvaccess.org/addonStore/legacy?file=fh">stabil verzió</a></li>
<li>Letöltés <a href="https://www.nvaccess.org/addonStore/legacy?file=fh-dev">fejlesztői verzió</a></li>
</ul>
<p>Egy megjelenő színes téglalap segítségével a gyengénlátó felhasználók, látó
fejlesztők vagy oktatók nyomon követhetik a navigátor kurzort és a fókuszban
lévő elemet.</p>
<p>A következő színeket jeleníti meg a kiegészítő:</p>
<ul>
<li>Green thin dashed-dotted line rectangle shows NVDA is in browse mode, and
this is the navigator object.</li>
<li>Red thin rectangle shows NVDA is in browse mode, and this is the focused
object/control.</li>
<li>Red thick rectangle shows NVDA is in browse mode, and this is both the
navigator object and the focused object which are overlapping.</li>
<li>Blue thick dotted line rectangle indicates NVDA is in focus mode, i.e.,
key types are passed to the control.</li>
</ul>
<p>To toggle object tracking, press NVDA+Alt+P. You can assign other gestures
using the Input Gestures dialog. Note that it works with NVDA 2018.3 or
later. Otherwise, you should disable or uninstall the addon itself for
disabling object tracking.</p>
<p>When Focus Highlight category of NVDA Settings dialog is available,
following items can be used.</p>
<ul>
<li>Make focus mode the default: This checkbox is enabled by default. When it
is unchecked, this add-on behaves same as version 5.6 or previous
versions, i.e., if browse mode is not available for an app, the focus is
shown using the thick red rectangle.</li>
<li><p>Focus in focus mode, Focus in browse mode, Navigator object: Each of these
groups contains Color, Thickness, and Style.</p>
<ul>
<li>Color: This edit field allows you to type the HTML color code, i.e.,
six-character hexadecimal number. For example, "ffffff" is white,
"ff0000" is red, and so on. Note that "000000" can not be used.</li>
<li>Thickness: This edit field allows you to type the thickness of the
box. You can enter a value between 1 and 30.</li>
<li>Style: The choices are Solid, Dash, Dot, Dash dot, and Dash dot-dot.</li>
</ul>
</li>
<li><p>Restore defaults: This button allows you to reset your settings to their
original defaults.</p></li>
</ul>
<h2>Changes for 6.3</h2>
<ul>
<li>Új és frissített fordítások</li>
<li>Fixed the issue that dash styles of focus (in browse mode) and navigator
object are not able to change.</li>
<li>Fixed the issue that 'Cancel' button of setting panel does not work after
'Restore defaults' button is pressed.</li>
</ul>
<h2>Changes for 6.2</h2>
<ul>
<li>Új és frissített fordítások</li>
<li>You can now turn object tracking on and off using NVDA+Alt+P. Karl-Otto
Rosenqvist contributed for this.</li>
</ul>
<h2>Changes for 6.1</h2>
<ul>
<li>Új és frissített fordítások</li>
<li>Addresses <a href="https://github.com/nvdajp/focusHighlight/issues/14">the issue</a>
with the latest development versions of NVDA.</li>
<li>Focus Highlight category of NVDA Settings dialog is now available. Note
that it works only with NVDA 2018.3 or later.</li>
<li><a href="https://github.com/nvdajp/focusHighlight/issues/3">Discussions regarding customizing
colors</a></li>
<li><a href="https://github.com/nvdajp/focusHighlight/issues/13">Discussions regarding 'Make focus mode the
default'</a></li>
</ul>
<h2>Changes for 6.0</h2>
<ul>
<li>Új és frissített fordítások</li>
<li>Addresses <a href="https://github.com/nvdajp/focusHighlight/issues/13">the issue</a>
regarding the browse mode.</li>
<li>Since this version, if the browse mode of NVDA is not available for an
application, it is always shown that NVDA is in focus mode for the
application, rather than using the red thick rectangle.</li>
<li>The thickness of the line representing the focus mode has been reduced to
half.</li>
</ul>
<h2>Changes for 5.6</h2>
<ul>
<li>Új és frissített fordítások</li>
<li>Addresses the compatibility issue with NVDA snapshot alpha-16682.</li>
</ul>
<h2>Changes for 5.5</h2>
<ul>
<li>Addresses the issue with NVDA 2018.4 and Firefox/Chrome web browsers.</li>
</ul>
<h2>Changes for 5.4</h2>
<ul>
<li>Új és frissített fordítások</li>
<li>Addresses <a href="https://github.com/nvdajp/focusHighlight/issues/11">the issue</a>
regarding version compatibility.</li>
</ul>
<h2>Changes for 5.3</h2>
<ul>
<li>Új és frissített fordítások</li>
<li>Addresses <a href="https://github.com/nvdajp/focusHighlight/issues/10">the issue</a>
regarding Chrome browser and application sleep mode.</li>
</ul>
<h2>Changes for 5.2</h2>
<ul>
<li>Új és frissített fordítások</li>
</ul>
<h2>Changes for 5.1</h2>
<ul>
<li>Removed debug log output.</li>
</ul>
<h2>Changes for 5.0</h2>
<ul>
<li>Indicators of navigator object and focus mode were changed.</li>
<li>Multiple monitors are supported.</li>
<li>It now uses GDI Plus technology for drawing.</li>
</ul>
<h2>Changes for 4.0</h2>
<ul>
<li>Hide rectangle if current application is in sleep mode.</li>
</ul>
<h2>A 3.0 verzió változásai</h2>
<ul>
<li>Fixed issue regarding expanded combo box.</li>
<li>Javítva egy, a Windows feladatkezelőben előjövő hiba</li>
<li>A fókuszmód jelzése.</li>
</ul>
<h2>A 2.1 verzió változásai</h2>
<ul>
<li>Új és frissített fordítások</li>
</ul>
<h2>A 2.0 verzió változásai</h2>
<ul>
<li>A kiegészítő súgója elérhető a bővítménykezelő párbeszédablakából is.</li>
</ul>
<h2>Az 1.1 verzió változásai</h2>
<ul>
<li>A navigátor kurzor téglalapja egy szaggatott vonalra lett változtatva.</li>
<li>A "Bővítmények ujratöltése" hiba javítva.</li>
</ul>
<h2>Az 1.0 verzió változásai</h2>
<ul>
<li>Javítva egy navigátor kurzor probléma az Internet explorer 10-ben és a
Skype programokban.</li>
<li>Első verzió</li>
</ul>
Hangjelzőmód kikapcsolásahttp://addons.nvda-project.org/addons/noBeepsSpeechMode.hu.html2023-08-14T13:52:29Z2013-07-16T07:37:13Z
<ul>
<li> Készítő: Alberto Buffolino.</li>
<li> Letöltés: <a href="https://www.nvaccess.org/addonStore/legacy?file=noBeepsSpeechMode">Stabil verzió</a></li>
<li> Letöltés: <a href="https://www.nvaccess.org/addonStore/legacy?file=noBeepsSpeechMode-dev">Fejlesztői verzió</a></li>
</ul>
<p>A kiegészítővel kikerülhető a hangjelzés beszédmód, így az NVDA+s
lenyomásával a beszéd és a csendes üzemmód között lehet váltogatni.</p>
<h2>A 2.0 verzió változásai</h2>
<ul>
<li> A kiegészítő súgója elérhető a bővítmények kezelése párbeszédpanelen is.</li>
</ul>
<h2>Az 1.5 verzió változásai</h2>
<ul>
<li> Hozzáadtak szkript kategóriát (beszéd).</li>
<li> Ellenőrzi, hogy van-e korábbi, nem támogatott verzió telepítve, és
értesíti a felhasználót, mielőtt eltávolítaná azt.</li>
</ul>
<h2>Az 1.4 verzió változásai</h2>
<ul>
<li> Ettől a verziótól kezdve a beszéd állapotára vonatkozó szöveg az NVDA
saját fordításából hangzik el, nem a kiegészítő nyelvi fájljából.</li>
</ul>
<h2>Az 1.3 verzió változásai</h2>
<ul>
<li> Hibajavítás A fordítás támogatásában: Hozzáadták a Python forrásokat,
hogy a szövegek lefordíthatóak legyenek.</li>
</ul>
<h2>Az 1.2 verzió változásai</h2>
<ul>
<li> Első változat</li>
</ul>
Virtuális áttekintőhttp://addons.nvda-project.org/addons/virtualRevision.hu.html2023-05-10T20:38:33Z2013-07-07T12:36:48Z
<ul>
<li>Készítők: Rui Batista és az NVDA bővítmények-csoport</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=virtualRevision">stable version</a></li>
<li>NVDA compatibility: 2019.3 and beyond</li>
</ul>
<p>Ezzel a kiegészítővel az NVDA felhasználók áttekinthetik az ablak tartalmát
egy szövegmezőben, hasonlóképpen ahogy ez a Jaws for Windows programban is
elérhető. A bővítmény csak egy kényelmi funkciót lát el, nem helyettesíti az
NVDA kiváló áttekintő módjait, és elem navigáció támogatását.</p>
<h2>Használat</h2>
<p>Nyomja meg az NVDA+control+w billentyűparancsot a Virtuális áttekintő
megjelenítéséhez, majd használja a szöveg áttekintő billentyűket a mező
elolvasásához. Az Esc lenyomásával zárhatja be az ablakot.</p>
<h2>Changes for 3.0</h2>
<ul>
<li>Requires NVDA 2019.3 or later.</li>
</ul>
<h2>Changes for 2.3</h2>
<ul>
<li>Internal changes to support future NVDA releases.</li>
</ul>
<h2>A 2.2 verzió változásai</h2>
<ul>
<li>When windows are minimized or if the foreground window has no title, NVDA
will record this fact when displaying virtual review window.</li>
</ul>
<h2>A 2.1 verzió változásai</h2>
<ul>
<li>The title of the screen under virtual review will be included.</li>
<li>It is now possible to review contents of Universal Windows Platform (UWP)
apps in Windows 10 and most modern apps in Windows 8.x.</li>
<li>When obtaining screen contents for modern and universal apps, a beep will
be heard to indicate when the virtual review window is ready.</li>
</ul>
<h2>A 2.0 verzió változásai</h2>
<ul>
<li>New name: Virtual Review.</li>
<li>Due to changes in how content is shown, NVDA 2015.2 or later is required.</li>
<li>Thanks to new features in 2015.2 and later, you can now find text in
virtualized windows.</li>
<li>Javítva a kiegészítő használata nem konzolos ablakkal.</li>
<li>Eltávolították a felesleges üres sorokat a virtualizált konzol ablak
aljáról.</li>
<li>Néhány apróbb javítás.</li>
<li>Fordítások hozzáadva.</li>
</ul>
<h2>Az 1.2 verzió változásai</h2>
<ul>
<li>A konzol ablakok virtualizálásának támogatása</li>
</ul>
<h2>Az 1.1 verzió változásai</h2>
<ul>
<li>A virtuális megjelenítő NVDA kiegészítővé konvertálása</li>
</ul>
<h2>Az 1.0 verzió változásai</h2>
<ul>
<li>Első kiadás</li>
</ul>
Könyvjelzőkhttp://addons.nvda-project.org/addons/placeMarkers.hu.html2024-03-10T18:13:35Z2013-06-04T20:10:52Z
<ul>
<li>Készítők: Noelia, Chris.</li>
</ul>
<p>This add-on is used for saving and searching specific text strings or
placemarkers. It can be used on web pages or documents in NVDA's browse
mode. It can also be used for saving or searching strings of text in
multi-line controls; in this case, if it's not possible to update the caret,
the corresponding string will be copied to the clipboard, so that it can be
searched using other tools. The plugin saves the specified strings and
placemarkers to files whose name is based on the title and URL of the
current document. This add-on is based on SpecificSearch and
Bookmark&Search, developed by the same author. You should uninstall them to
use this one, since they have common keystrokes and features.</p>
<h2>Billentyűparancsok:</h2>
<ul>
<li>control+shift+NVDA+f: Opens a dialog with an edit box that shows the last
saved search; in this dialog you can also select the previously saved
searches from a combo box or remove the selected string from the history
using a checkbox. You can choose if the text contained in the edit box
will be added to the history of your saved texts. Finally, choose an
action from the next group of radio buttons (between Search next, Search
previous or Don't search), and specify if NVDA will make a case sensitive
search. When you press okay, NVDA will search for this string.</li>
<li>control+shift+NVDA+y: Saves the current position as a placemarker. If you
want to provide a name for this placemarker, select some text from this
position before saving it.</li>
<li>control+shift+NVDA+delete: Deletes the placemarker corresponding to this
position.</li>
<li>NVDA+y: Moves to the next placemarker.</li>
<li>shift+NVDA+y: Moves to the previous placemarker.</li>
<li>Not assigned: Shows the file name where the placemarkers data will be
saved in browse mode, without an extension.</li>
<li>alt+NVDA+y: Opens a dialog with the placemarkers saved for this
document. You can write a note for each placemarker; press Save note to
save changes. Pressing Delete you can remove the selected
placemarker. Pressing OK you can move to the selected position.</li>
<li>Not assigned: Saves a position as a temporary placemarker.</li>
<li>Not assigned: Moves to the temporary placemarker for the current document.</li>
<li>Not assigned: Finds the next occurrence of the last text searched for any
specific document.</li>
<li>Not assigned: Finds the previous occurrence of the last text searched for
any specific document.</li>
</ul>
<h2>PlaceMarkers Submenu (NVDA+N)</h2>
<p>Using the PlaceMarkers submenu under NVDA's Preferences menu, you can
access:</p>
<ul>
<li>Specific search folder: Opens a folder of specific searches previously
saved.</li>
<li>Bookmarks folder: Opens a folder of the saved placemarkers.</li>
<li>Copy placeMarkers folder: You can save a copy of the placeMarkers folder.</li>
<li>Restore placeMarkers: You can restore your placeMarkers from a previously
saved placeMarkers folder.</li>
</ul>
<p>Note: The placemarker position is based on the number of characters; and
therefore in dynamic pages it is better to use the specific search, not
placemarkers.</p>
<h2>Changes for 35.0</h2>
<ul>
<li>Removed URL parameters from file names, so that bookmarks are valid for
specific websites in different sessions.</li>
</ul>
<h2>Changes for 24.0</h2>
<ul>
<li>Y is used instead of k in gestures such as NVDA+k, NVDA+shift+k,
NVDA+alt+k and NVDA+control+shift+k.</li>
<li>Compatible with NVDA 2023.1.</li>
</ul>
<h2>Changes for 23.0</h2>
<ul>
<li>The add-on works again with Microsoft Word.</li>
</ul>
<h2>Changes for 22.0</h2>
<ul>
<li>We can move to bookmarks and delete them with UIA enabled, thanks to
Abdel.</li>
</ul>
<h2>Changes for 21.0</h2>
<ul>
<li>Bookmarks can be saved with UIA enabled in browsers based on Chromium,
thanks to Abdel.</li>
</ul>
<h2>Changes for 20.0</h2>
<ul>
<li>Requires NVDA 2022.1 or later.</li>
</ul>
<h2>Changes for 19.0</h2>
<ul>
<li>The add-on cannot be run on secure screens.</li>
</ul>
<h2>Changes for 18.0</h2>
<ul>
<li>The command to see the path for placeMarkers shows if there are permanent
bookmarks, text for specific search or a temporary bookmark for the
current document.</li>
</ul>
<h2>Changes for 17.0</h2>
<ul>
<li>Fixed a bug which didn't allow to save place markers in some documents.</li>
<li>Fixed translated strings making translations to work properly.</li>
</ul>
<h2>Changes for 16.0</h2>
<ul>
<li>Compatible with NVDA 2021.1 or later (required).</li>
<li>Skim reading is supported when moving to temporary bookmarks.</li>
<li>If needed, you can download <a href="https://github.com/nvdaes/placeMarkers/releases">other
versions</a>.</li>
</ul>
<h2>Changes for 15.0</h2>
<ul>
<li>When reading with say all in browse mode, the specific find next and
specific find previous commands do not stop reading anymore if Allow skim
reading option is enabled, according to find next and find previous
commands from NVDA 2020.4.</li>
<li>When the Specific search dialog is opened after running the Specific find
previous command, the Search previous option will be selected.</li>
</ul>
<h2>Changes for 14.0</h2>
<ul>
<li>The command to copy the name of the file where place markers data will be
saved has been replaced by a command which shows this file name in browse
mode. This is not assigned to a gesture.</li>
<li>The "Text to search" field does not overlap the "Saved text" field
anymore. (Thanks to Cyrille Bougot).</li>
<li>Requires NVDA 2019.3 or later.</li>
</ul>
<h2>Changes for 13.0</h2>
<ul>
<li>Added not assigned commands to find the next and previous occurrences of
the last text searched for any specific document.</li>
<li>The specific search feature works when the NVDA's About dialog is open.</li>
<li>In the Specific search dialog, the case sensitive checkbox will be checked
if this option was selected for the last search.</li>
<li>When the add-on is updated, bookmarks and strings for specific search
saved in the previous version of the add-on will be automatically copied
to the new version, unless you prefer to import place markers saved in the
main configuration folder of NVDA.</li>
<li>When using the dialog to copy place markers, if the chosen folder is not
named placeMarkersBackup, a subfolder with this name will be created to
prevent the deletion of directories containing important data, such as
Documents or Downloads.</li>
</ul>
<h2>Changes for 12.0</h2>
<ul>
<li>Fixed a critical bug which caused NVDA to crash when trying to open the
Notes dialog, if chinese characters were selected before saving bookmarks.</li>
</ul>
<h2>Changes for 11.0</h2>
<ul>
<li>Compatible with NVDA 2018.3 or later (required).</li>
<li>If needed, you can download the <a href="https://www.nvaccess.org/addonStore/legacy?file=pm-o">last version compatible with NVDA
2017.3</a>.</li>
</ul>
<h2>Changes for 10.0</h2>
<ul>
<li>In Edge, gestures associated with bookmarks selection, such as NVDA+k,
NVDA+shift+k or NVDA+alt+k, will be sent to the application instead of
trying to move the cursor to bookmarks, to avoid errors, especially in
long documents.</li>
<li>Now specific search is supported in Edge.</li>
</ul>
<h2>Changes for 9.0</h2>
<ul>
<li>When moving to a bookmark from the Notes dialog, the review cursor follows
the system cursor.</li>
<li>The command to select the previous bookmark works properly again.</li>
<li>Bookmarks can be deleted from the Notes dialog.</li>
<li>Now you can assign gestures to save and move to a temporary bookmark for
each document.</li>
</ul>
<h2>Changes for 8.0</h2>
<ul>
<li>Removed fragment identifiers from bookmark filenames, which can avoid
issues in the VitalSource Bookshelf ePUB reader.</li>
<li>Added a Notes dialog, to associate comments for saved bookmarks and move
to the selected position.</li>
</ul>
<h2>Changes for 7.0</h2>
<ul>
<li>The dialog to save a string of text for specific search has been
removed. This functionality is now included in the Specific search dialog,
which has been redesigned to allow different actions when pressing the OK
button.</li>
<li>The visual presentation of the dialogs has been enhanced, adhering to the
appearance of the dialogs shown in NVDA.</li>
<li>Performing a Find Next or Find Previous command in Browse Mode will now
correctly do a case sensitive search if the original Find was case
sensitive.</li>
<li>Requires NVDA 2016.4 or later.</li>
<li>Now you can assign gestures to open the Copy and Restore place markers
dialogs.</li>
<li>NVDA will present a message to notify when place markers have been copied
or restored with the corresponding dialogs.</li>
</ul>
<h2>A 6.0 verzió változásai</h2>
<ul>
<li>Amikor a kiegészítő szolgáltatásai nem használhatók, akkor a program
átadja a billentyűparancsait az aktuális alkalmazásnak.</li>
</ul>
<h2>Az 5.0 verzió változásai</h2>
<ul>
<li>Kis- és nagybetűket megkülönböztető keresési lehetőség hozzáadva.</li>
<li>Eltávolítva a dokumentáció megnyitásának lehetősége a kiegészítő
menüjéből.</li>
<li>Sokkal logikusabb billentyűparancsok.</li>
</ul>
<h2>A 4.0 verzió változásai</h2>
<ul>
<li>Eltávolításra került a fragment azonosító a könyvjelzők fájlneveiből, így
elkerülhető az ePUBREADER Firefox bővítmény használatakor jelentkező hiba.</li>
<li>A kiegészítő súgója elérhető a bővítmények kezelése párbeszédablakról is.</li>
</ul>
<h2>A 3.1 verzió változásai</h2>
<ul>
<li>Fordítások frissítése, és egy új nyelv hozzáadása</li>
<li>Átfutó olvasás közben nem hangzik el a könyvjelző aktuális pozíciója</li>
</ul>
<h2>A 3.0 verzió változásai</h2>
<ul>
<li>Az átfutó olvasás támogatásának hozzáadása</li>
</ul>
<h2>A 2.0 verzió változásai</h2>
<ul>
<li>A különböző keresések elmenthetők és törölhetők minden fájlnál.</li>
<li>A program már jól működik hogyha az elérésiút tartalmaz nem latin
karaktereket.</li>
<li>A billentyűparancsok megváltoztathatóak az NVDA Beviteli parancsok
beállítás ablakában.</li>
</ul>
<h2>Az 1.0 verzió változásai</h2>
<ul>
<li>Első kiadás</li>
<li>Lefordítva az alábbi nyelvekre: brazíliai portugál, perzsa, finn, francia,
galíciai, magyar, német, olasz, japán, kóreai, nepáli, portugál, spanyol,
szlovák, szlovén, tamil.</li>
</ul>
Tájékoztató üzemmódhttp://addons.nvda-project.org/addons/controlUsageAssistant.hu.html2024-03-24T15:56:56Z2013-05-10T07:46:45Z
<ul>
<li>Author: Joseph Lee, Noelia Ruiz Martínez</li>
</ul>
<p>A bővítmény az NVDA+H billentyűparanccsal információkat ad a fókuszban lévő
vezérlők és elemek használatához.</p>
<p>Go to NVDA's menu, Preferences submenu, Settings dialog, Control Usage
Asistant category to configure add-on settings:</p>
<ul>
<li>Automatic messages for focus: Checked by default.</li>
<li>Type the message to be used when an object can be activated: You may
include a short message indicating the default or your configured gesture
to know if the current object has an associated action when pressing a
gesture like NVDA+enter in object navigation.</li>
<li>Select output modes for automatic messages: This list of checkboxes allows
to select speech and braille.</li>
<li>Pitch change for automatic messages: This spin box allows to set the pitch
change when NVDA reads automatic messages (from -30 to +30).</li>
</ul>
<h2>Version 20240324.0.0</h2>
<ul>
<li>Improved support for edit controls and suggestions.</li>
</ul>
<h2>Version 2023.02.19</h2>
<ul>
<li>The message configured for clickable objects will be reported after other
properties.</li>
<li>Compatible with NVDA 2023.1.</li>
</ul>
<h2>Version 2022.07.10</h2>
<ul>
<li>Added ability to set a message for object navigation, to announce if the
current object can be activated.</li>
</ul>
<h2>Version 2022.03.27</h2>
<ul>
<li>Requires NVDA 2022.1 or later.</li>
</ul>
<h2>Version 22.01</h2>
<ul>
<li>Added support for automatic messages.</li>
<li>Improved support for requested messages in browse mode.</li>
</ul>
<h2>Version 21.10</h2>
<ul>
<li>NVDA 2021.2 or later is required due to changes to NVDA that affects this
add-on.</li>
</ul>
<h2>Version 20.10</h2>
<ul>
<li>Help messages are announced in languages other than English.</li>
</ul>
<h2>20.06-os verzió</h2>
<ul>
<li>Javítottak több kódolási hibát és lehetséges bugot.</li>
<li>NVDA will no longer appear to do nothing or play error tones when trying
to obtain help for certain browse mode controls.</li>
</ul>
<h2>20.01 verzió</h2>
<ul>
<li>NVDA 2019.3 vagy újabb kiadás szükséges</li>
</ul>
<h2>3.0/19.11 verzió</h2>
<ul>
<li>A verziószám mostantól az év.hónap formátumot követi.</li>
<li>Az NVDA+H lenyomása után most már egy súgóablak jelenik meg és nem csak
egy üzenet.</li>
</ul>
<h2>2.5 verzió</h2>
<ul>
<li>Python 3 kompatibilitás.</li>
</ul>
<h2>2.1 verzió</h2>
<ul>
<li>Új és frissített fordítások.</li>
</ul>
<h2>2.0 verzió</h2>
<ul>
<li>Több súgóüzenetet is hozzáadtak, beleértve a terminál ablakhoz tartozókat.</li>
<li>Több, a munkát elősegítő programhoz rendeltek hozzá súgóüzenetet, úgy mint
a Microsoft Excel, Powerpoint és Windows 8 kezdőképernyő.</li>
<li>Súgó üzeneteket adtak hozzá az űrlapokkal dolgozó alkalmazásokhoz
(Internet explorer, Adobe reader, Mozilla Firefox, stb).</li>
<li>Új nyelv: Dán</li>
</ul>
<h2>1.0 verzió</h2>
<ul>
<li>Első verzió</li>
</ul>
Erőforrás-kilistázóhttp://addons.nvda-project.org/addons/resourceMonitor.hu.html2024-03-23T17:00:30Z2013-03-03T14:32:05Z
<ul>
<li>Authors: Alex Hall, Joseph Lee, Kefas Lungu, Beqa Gozalishvili, Tuukka
Ojala, Ethin Probst and other NVDA contributors</li>
<li>Letöltés <a href="https://www.nvaccess.org/addonStore/legacy?file=resourceMonitor">Stabil verzió</a></li>
<li>NVDA compatibility: 2022.4 and later</li>
</ul>
<p>This add-on gives information about CPU load, memory usage and other
resource usage information.</p>
<h1>Billentyűparancsok</h1>
<p>All commands support speech on demand mode (NVDA 2024.1 and later).</p>
<ul>
<li>NVDA+Shift+E: presents used ram, average processor load, and battery info
if available.</li>
<li>NVDA+Shift+1: presents the average processor load and if multicore CPU's
are present the load of each core.</li>
<li>NVDA+Shift+2/5: presents the used and total space for both physical and
virtual ram.</li>
<li>NVDA+Shift+3: presents the used and total space of the static and
removable drives.</li>
<li>NVDA+Shift+4: presents battery percentage, charging status, remaining time
(if not charging), and a warning if the battery is low or critical.</li>
<li>NVDA+Shift+6: presents CPU Architecture and Windows version and service
pack numbers.</li>
<li>NVDA+Shift+7: presents the system's uptime.</li>
<li>NVDA+Shift+8: presents information on the wireless connection, ssid name
and strength, or no ssid if there is none available.</li>
</ul>
<p>You can change these shortcut keys via input gestures dialog.</p>
<h2>Használati megjegyzések</h2>
<p>Ez a kiegészítő nem helyettesíti a feladatkezelőt és a többi rendszerfigyelő
Windows-os programot. Fontos megjegyezni a következőket:</p>
<ul>
<li>Resource information cannot be copied to clipboard if running the add-on
in secure screens.</li>
<li>CPU usage is given for logical processors, not physical cores. This is
noticeable for processors which uses Hyper-Threading where number of CPU's
is twice the number of CPU cores. On some newer computers, not all CPU
cores will have hyper-threading enabled.</li>
<li>If there is heavy disk activity such as copying large files, there might
be delays when obtaining disk usage information.</li>
<li>When announcing processor architecture information, "x86" and "AMD64"
refer to 32-bit and 64-bit (x64) Intel and AMD processors, respectively.</li>
<li>This add-on requires Windows 10 or later.</li>
</ul>
<p>Note on license: this add-on uses Psutil, licensed under 3-Clause BSD
License which is compatible with GNU General Public License.</p>
<h2>Version 24.04</h2>
<ul>
<li>Updated psutil dependency to 5.9.8.</li>
<li>Added support for speech on demand mode so resource information can be
announced in this mode.</li>
</ul>
<h2>Version 23.11</h2>
<ul>
<li>Downgraded psutil dependency to 5.9.4 due to problems with memory usage
announcements.</li>
</ul>
<h2>Version 23.10</h2>
<ul>
<li>Updated psutil dependency to 5.9.5.</li>
</ul>
<h2>Version 23.09</h2>
<ul>
<li>NVDA will no longer log startup error messages on Windows Server systems
when wireless capability modules are unavailable.</li>
</ul>
<h2>Version 23.06</h2>
<ul>
<li>Situation where resourceMonitor doesn't work properly due to
unavailability of wireless adapters has been fixed.</li>
</ul>
<h2>Version 23.05.1</h2>
<p>wlanReporter NVDA-addon is now part of resourceMonitor!</p>
<ul>
<li><p>The old way of checking for wireless connections has been replaced by the
windows API from wlanReporter: https://github.com/kvark128/WlanReporter/ .</p>
<ul>
<li>After speaking SSID name and strength, NVDA will also now tell you the
security type of your network.</li>
<li>NVDA will now alert you when you connect and disconnect from a wireless
network.</li>
<li>NVDA will now alert you when wireless connections is turned on or off.</li>
</ul>
</li>
</ul>
<h2>Version 23.05</h2>
<ul>
<li><p>added the ability to detect and present the state of the connected
wireless network.</p>
<ul>
<li>Announces the name of the connected wireless SSID.</li>
<li>Announces the strength of the ssid</li>
<li>Announce SSID not found if None is detected.</li>
</ul>
</li>
</ul>
<h2>Version 23.02</h2>
<ul>
<li>NVDA 2022.4 or later is required.</li>
<li>Windows 10 21H2 (November 2021 Update/build 19044) or later is required.</li>
</ul>
<h2>Version 23.01</h2>
<ul>
<li>NVDA 2022.3 or later is required.</li>
<li>Windows 10 or later is required as Windows 7, 8, and 8.1 are no longer
supported by Microsoft as of January 2023.</li>
<li>Updated psutil dependency to 5.9.4.</li>
<li>NVDA will announce actual processor architecture (x86/AMD64/ARM64) as part
of Windows version information.</li>
<li>On single-core systems, NVDA will no longer announce CPU core load as
average CPU load is the same as core load.</li>
</ul>
<h2>Version 22.03</h2>
<p>Version 22.03 is the last stable version to support Windows 7 Service Pack
1, 8, and 8.1.</p>
<ul>
<li>NVDA 2021.3 or later is required.</li>
<li>A warning message will be displayed when attempting to install the add-on
on Windows 7, 8, and 8.1.</li>
<li>Updated psutil dependency to 5.9.0.</li>
</ul>
<h2>Version 22.01</h2>
<ul>
<li>NVDA 2021.2 or later is required.</li>
</ul>
<h2>Version 21.10</h2>
<ul>
<li>NVDA 2021.1 or later is required due to changes to NVDA that affects this
add-on.</li>
</ul>
<h2>Version 21.08</h2>
<ul>
<li>Minimum Windows release requirement is now tied to NVDA releases.</li>
<li>Windows builds 20348 and 22000 are recognized as Windows Server 2022 and
Windows 11, respectively.</li>
<li>On Insider Preview builds, Windows release such as "Windows 10" will not
be used. Instead NvDA will announce "Windows Insider".</li>
<li>On 64-bit systems, processor architecture (x64 or ARM64) will be announced
as part of Windows version information.</li>
</ul>
<h2>Version 21.04</h2>
<ul>
<li>NVDA 2020.4 or later is required.</li>
<li>Updated psutil dependency to 5.8.0.</li>
<li>When pressing add-on commands twice to copy resource information to
clipboard, NVDA will announce resource summary that is being copied.</li>
</ul>
<h2>Version 21.01</h2>
<ul>
<li>Updated psutil dependency to 5.7.3.</li>
<li>Shortened Windows version message.</li>
<li>On Windows 8.1, build.revision will be announced as part of Windows
version message, similar to Windows 10.</li>
</ul>
<h2>Version 20.09</h2>
<ul>
<li>System uptime is now given as days, hours, minutes, seconds.</li>
<li>Windows Server Insider Preview build 20201 or later is properly recognized
as a Server Insider build.</li>
</ul>
<h2>Version 20.07</h2>
<ul>
<li>Windows 10 Version 20H2 is properly recognized when obtaining Windows
version information (NVDA+Shift+6).</li>
<li>Simplified Windows 10 version message i.e. Windows 10 YYMM instead of
Windows 10verYYMM when pressing NVDA+Shift+6.</li>
</ul>
<h2>Version 20.06</h2>
<ul>
<li>Resolved many coding style issues and potential bugs with Flake8.</li>
</ul>
<h2>Version 20.04</h2>
<ul>
<li>Updated psutil dependency to 5.7.0.</li>
</ul>
<h2>Version 20.01</h2>
<ul>
<li>NVDA 2019.3 or later is required due to extensive use of Python 3.</li>
</ul>
<h2>Version 19.11</h2>
<ul>
<li>Improved detection of Windows Insider Preview builds, especially for 20H1
and beyond.</li>
</ul>
<h2>Version 19.07</h2>
<ul>
<li>Updated psutil dependency to 5.6.3.</li>
<li>Internal changes to battery status announcement command.</li>
</ul>
<h2>Version 18.12</h2>
<ul>
<li>Internal changes to support future NVDA releases.</li>
</ul>
<h2>Version 18.10</h2>
<ul>
<li>Code has been made more compatible with Python 3.</li>
<li>Updated psutil dependency to 5.4.7.</li>
<li>When obtaining disk capacity and memory usage, NVDA will no longer give
errors if using a computer or a service with more than a petabyte of RAM
or disk size.</li>
<li>Values for memory and disk usage are shown with up to two decimal places
(e.g. 4.00 GB instead of 4.0 GB).</li>
<li>Improved detection of Windows Insider Preview builds.</li>
</ul>
<h2>Version 18.04</h2>
<p>Version 18.04.x is the last release to support Windows releases earlier than
7 SP1.</p>
<ul>
<li>Last release to support Windows Server 2003, Vista and Server 2008.</li>
<li>Better detection of Windows 10 releases and distinguishing between public
and Insider Preview builds.</li>
</ul>
<h2>Version 17.12</h2>
<ul>
<li>Added support for 64-bit ARM processors on Windows 10.</li>
</ul>
<h2>Version 17.09</h2>
<p>Important: Version 17.09.x is the last version to support Windows XP.</p>
<ul>
<li>Last version to run on Windows XP.</li>
<li>Windows 10 build 16278 and later is recognized as Version 1709. A minor
revision for this add-on will be released once Version 1709 stable build
is released.</li>
</ul>
<h2>Version 17.07.1</h2>
<ul>
<li>Reintroduce support for Windows XP (broken since version 17.02).</li>
</ul>
<h2>Version 17.05</h2>
<ul>
<li>Announcement of system uptime (time passed since last boot; NVDA+Shift+7).</li>
</ul>
<h2>Version 17.02</h2>
<ul>
<li>Updated psutil dependency to 5.0.1.</li>
<li>When checking disk usage, NVDA will no longer present an error dialog on
some systems where a removable media is not properly recognized (such as
when a card isn't inserted into a card reader).)</li>
</ul>
<h2>Version 16.08</h2>
<p>Starting with version 16.08, add-on releases will be shown as
year.month.revision.</p>
<ul>
<li>Various revisions of Windows 10 are now properly recognized (such as 1607
for build 14393).</li>
<li>Windows 10 build revisions (after installing cumulative updates) are
properly recognized (such as 14393.51).</li>
<li>If using Insider Preview builds, this fact is recognized.</li>
</ul>
<h2>A 4.5 verzió változásai</h2>
<ul>
<li>A bővítmény tárolóját áthelyezték a GitHubra (Megtalálható a
https://github.com/josephsl/resourcemonitor oldalon).</li>
<li>A bővítmény már megfelelően felismeri a Windows server 2016-ot.</li>
</ul>
<h2>A 4.0 verzió változásai</h2>
<ul>
<li>A psutil függőség frissítése az 2.2.1. verzióra.</li>
<li>Jelentősen javult a teljesítmény a processzor terhelésének lekérésekor.</li>
<li>Hozzáadtáka Windows 10 támogatását.</li>
<li>Windows 10 esetén már elhangzik a build szám.</li>
<li>A kiegészítő súgójának eléréséhez használja a Bővítménykezelőt.</li>
</ul>
<h2>A 3.1 verzió változásai</h2>
<ul>
<li>Az Erőforrás-kilistázómár támogatja a Windows 8 operációs rendszert.</li>
<li>Fordítások frissítése</li>
</ul>
<h2>A 3.0 verzió változásai</h2>
<ul>
<li>A psutil függőség frissítése az 1.2.1. verzióra.</li>
<li>Bemondja a feltelepített Windows verzióját és szervizcsomagját, ha
elérhető. (NVDA+Shift+6)</li>
<li>Lehetőség van a kiegészítő billentyűparancsainak megváltoztatására (NVDA
2013.3-tól)</li>
<li>Lehetőség van az egyéni erőforrás információkat a vágólapra másolni egy
kiválasztott erőforrás billentyűparancsának kétszeri lenyomásával.</li>
</ul>
<h2>A 2.4. verzió változásai</h2>
<ul>
<li>Új nyelvek: egyszerűsített kínai, ukrán.</li>
<li>Fordítások frissítése</li>
</ul>
<h2>A 2.3. verzió változásai</h2>
<ul>
<li>Bolgár fordítás hozzáadása.</li>
</ul>
<h2>A 2.2. verzió változásai</h2>
<ul>
<li>Új fordítások: Arab, Aragóniai, Horvát, Holland, Finn, Francia, Galíciai,
Német, Magyar, Olasz, Japán, Koreai, Nepáli, Lengyel, Portugál
(Brazíliai), Orosz, Szlovák, Szlovén, Spanyol, Tamil és Török.</li>
</ul>
<h2>A 2.1. verzió változásai</h2>
<ul>
<li>A psutil függőség frissítése a 0.6.1 verzióra.</li>
<li>A hosszú várakozás kiküszöbölése a meghajtókról való információk
beszerzése közben.</li>
<li>Kódtisztítás.</li>
</ul>
<h2>A 2.0 verzió változásai</h2>
<ul>
<li>Fordítások támogatása, és fordítási megjegyzések hozzáadása.</li>
</ul>
<h2>Az 1.0 változásai</h2>
<ul>
<li>Első kiadás</li>
</ul>
Unikód Braille bevitelhttp://addons.nvda-project.org/addons/unicodeBrailleInput.hu.html2023-05-10T20:38:33Z2013-03-03T11:53:54Z
<ul>
<li>Authors: Mesar Hameed, Patrick Zajda, Leonard de Ruijter.</li>
<li>Letöltés: <a href="https://www.nvaccess.org/addonStore/legacy?file=unicodeBrailleInput">Stabil verzió</a></li>
</ul>
<p>This add-on allows you to convert text from braille (E.G. 1345-1236-145-1)
to Unicode braille characters. You can also convert text according to the
currently selected input braille table.</p>
<p>The purpose of this specialized addon is to make it easier to help to
improve liblouis tables and to add automatic tests for your language. With
the addition of unicode braille table in NVDA 2017.3, this add-on is no
longer required for this, as users can choose to input braille with the new
table. However, this add-on can still aid in converting normal text to
unicode braille according to a particular input table.</p>
<h2>Használat</h2>
<ul>
<li>Open a unicode aware text editor (for example Notepad++).</li>
<li>Press NVDA+Ctrl+U or choose Unicode Braille Input found under NVDA tools
menu.</li>
<li>Select whether your input consists of braille dots (e.g. 1345-1236-145-1)
or normal text according to the current braille table (e.g. Dutch
(Netherlands).</li>
<li>Type your braille text in numeric form or your normal text, respectively.</li>
<li>Nyomja meg az ok gombot.</li>
<li>A kívánt unicode karaktersorozat a vágólapra kerül, amit bárhova
beilleszthet.</li>
</ul>
<h2>Changes for 3.0</h2>
<ul>
<li>New maintainer: Leonard de Ruijter.</li>
<li>Add-on is compatible with Python 3 and therefore with NVDA 2019.3 and
above.</li>
<li>Added the ability to create unicode braille from normal text according to
the currently selected input braille table.</li>
</ul>
<h2>Az 1.0 verzió változásai</h2>
<ul>
<li>A kiegészítő súgója elérhető a bővítmények párbeszédablakáról is.</li>
</ul>
<h2>Az 1.1 verzió változásai</h2>
<ul>
<li>Fejlesztett késleltetés a bejelentések megfelelő hallhatósága érdekében.</li>
<li>Sok új fordítás.</li>
<li>A dokumentáció már elérhető az NVDA Súgó menüjéből.</li>
<li>Hozzáadtak egy jelölőnégyzetet, aminek a bejelölésével felülírhatók a
Braille szóköz (0x2800) karakterek a normál szóköz karakterrel.</li>
<li>A billentyűparancsok már módosíthatók az NVDA Beviteli parancsok
párbeszédablakában, az Eszközök kategóriában.</li>
</ul>
<h2>Az 1.0 verzió változásai</h2>
<ul>
<li>Első kiadás</li>
<li>Új nyelvek: francia</li>
</ul>
Gyorsfordítóhttp://addons.nvda-project.org/addons/instantTranslate.hu.html2023-05-10T20:38:33Z2013-01-31T07:50:27Z
<ul>
<li>Készítők: Alexy Sadovoy, Beqa Gozalishvili, Mesar Hameed, Alberto
Buffolino, és további NVDA közreműködők.</li>
<li>Letöltés <a href="https://www.nvaccess.org/addonStore/legacy?file=instantTranslate">Stabil verzió</a></li>
<li>Letöltés <a href="https://www.nvaccess.org/addonStore/legacy?file=it-dev">Fejlesztői verzió</a></li>
</ul>
<p>This add-on is used to translate selected and/or clipboard text from one
language to another. This is done using the Google Translate service.</p>
<h2>Nyelvek beállítása</h2>
<p>A forrás, célnyelv, és nyelvek felcserélésére szolgáló lehetőségeket az NVDA menü->beállítások->Gyorsfordító beállításai menüpontban érheti el.</p>
<p>A megnyíló ablakban két kombinált listamező található a forrásnyelv és
célnyelv beállítására, ill. egy jelölőnégyzet, mellyel a fordítás vágólapra
másolását lehet elrendelni vagy tiltani.</p>
<p>Amennyiben a forrásnyelvnél az automatikus nyelvfelismerését választotta ki
(a listában az első elem), megjelenik egy "Felcserélés nyelve" megnevezésű
lista, amellyel a nyelv felcserélését lehet konfigurálni, és egy az
automatikus felcserélés beállítására való jelölőnégyzet is.</p>
<p>Az első két kombinált listamező és a másolást szabályzó jelölőnégyzet
működése egyértelmű, viszont a többi beállítás bővebb magyarázatra
szorul. Fontos, hogy az alábbiak csak akkor érvényesek, ha a forrás nyelve
automatikusra van állítva.</p>
<p>A "Felcserélés nyelve" funkció abban az esetben hasznos, ha a forrás és cél
nyelv váltását automatikusan szeretné megoldani. Mivel az automatikus
felismerésnek a cél nyelv esetén nincs értelme, így ez ebben a listában nem
jelenik meg.</p>
<p>Képzelje el a következő szituációt: Minden szöveget magyar nyelvre szeretne
lefordítani, de olykor a magyarul begépelt szövegnek szeretné megnézni az
angol fordítását is. Amennyiben a felcserélés nyelvét angolra állítja, úgy a
két nyelv közötti fordítás automatikusan megtörténik, anélkül, hogy
megnyitná a kiegészítő párbeszédablakát.</p>
<p>Ha a forrás nyelvnél az automatikus felismerés van kiválasztva, megjelenik
egy jelölőnégyzet az automatikus forrás és célnyelv felcseréléséről. Ha
aktiválja ezt, a kiegészítő megpróbálja automatikusan váltogatni a forrás és
a célnyelvet. Ekkor a forrás nyelv lesz a célnyelv, és a "Felcserélés
nyelve" az új forrás nyelv. Ez a lehetőség akkor nagyon hasznos, hogyha a
beállított célnyelvről szeretnénk egy szöveget lefordíttatni.</p>
<p>A fenti példából kiindulva, ha bármilyen szöveget lefordít magyarra, az
eredmény magyar nyelvű lesz. A felcserélés nyelve funkció használata nélkül
ha egy magyar szöveget ad meg a programnak, ugyanazt a szöveget kapja
vissza, aminek nincs túl sok értelme. Az automatikus felcserélésnek
köszönhetően a kiegészítő felismeri, hogy az éppen kijelölt szöveget milyen
nyelvre kell lefordítania, ha a szöveg nyelve nem egyezik meg a
célnyelvével, akkor automatikusan a célnyelven adja vissza.</p>
<p>Anyway, this is a temporary configuration; if this option has no effect
(it's experimental), try to commute manually to a stable configuration,
using the gesture for swapping described below. It's experimental because in
some situations (with short texts, typically), Google does not recognize the
real source language correctly, and you have to swap languages manually via
script, so to force the source language to be the previous target language
(English in our example).</p>
<p>At least, in the speech settings parameters dialog (NVDA Menu >> Preferences >> Speech), you may want to check the "Automatic language switching (when supported)" option. This way, if you are using a multi-lingual synthesizer, the translation will be announced using the target language voice of the synthesizer.</p>
<h2>Használat</h2>
<p>You can use this add-on in three ways:</p>
<ol>
<li>Select some text using selection commands (shift with arrow keys, for
example) and press associated key to translate. translation result will
be read with synthesizer which you are using.</li>
<li>A kiegészítő képes a vágólapon lévő szöveg lefordítására is.</li>
<li>Press the dedicated shortcut key to translate the last spoken text.</li>
</ol>
<h2>Billentyűparancsok</h2>
<p>Az alábbi parancsok az "NVDA+Shift+t" módosító billentyűparancs lenyomása
után használhatók:</p>
<ul>
<li>T: Lefordítja a kijelölt szöveget,</li>
<li>Shift+t: Lefordítja a vágólapon található szöveget,</li>
<li>S: Felcseréli a forrás- és a célnyelvet.</li>
<li>A: Bemondja az aktuális beállításokat,</li>
<li>C: Az utolsó fordítás eredményét a vágólapra másolja,</li>
<li>I: Felismeri a kijelölt szöveg nyelvét,</li>
<li>L: translate the last spoken text,</li>
<li>O: open translation settings dialog</li>
<li>H: announces all available layered commands.</li>
</ul>
<h2>Changes for 4.4.3</h2>
<ul>
<li>Added the ability to replace underscores with spaces, may provide better
translation results depending on context (thanks to Beka Gozalishvili)</li>
<li>Added compatibility for NVDA 2022.1</li>
</ul>
<h2>Changes for 4.4.2</h2>
<ul>
<li>Restore language detection and auto-swapping (Thanks to Cyrille for fix)</li>
<li>updated languages for translation (thanks to Cyrille)</li>
</ul>
<h2>Changes for 4.4</h2>
<ul>
<li>Instant translate is now compatible with NVDA 2019.3 (Python 3 versions of
NVDA)</li>
</ul>
<h2>Changes for 4.3</h2>
<ul>
<li>nvda compatibility fix Now instant translate will be compatible with
latest nvda builds.</li>
<li>found a way to use google as a translation service again.</li>
</ul>
<h2>Changes for 4.2</h2>
<ul>
<li>Restored working state with newer versions of nvda.</li>
<li>Restored automatic language detection.</li>
</ul>
<h2>A 4.1 verzió változásai</h2>
<ul>
<li>A gyorsfordító újra működik, a Google szolgáltatása helyett Yandex fordító
szolgáltatásával.</li>
</ul>
<h2>A 4.0 verzió változásai</h2>
<ul>
<li>A fordítás eredménye automatikusan a vágólapra kerül a nyelv felcserélést
követöen.</li>
<li>A gyorsítótárazási hibát javították.</li>
</ul>
<h2>A 3.0 verzió változásai</h2>
<ul>
<li>Megváltoztatták a billentyűparancsok felépítését, az NVDA+shift+t
megnyomása után az egykarakteres gyorsbillentyűt lenyomva aktiválható a
kiválasztott funkció. Bővebb információk a {"Billentyűparancsok"
fejezetben} olvashatók.</li>
<li>Beépítették a nyelvek felcserélése funkciót.</li>
<li>A beállítás módjának megváltoztatása, így módosíthatóak a Gyorsfordító
beállításai egy csak olvasható eszközön is, de ezek csak az NVDA
újraindításáig maradnak életben.</li>
<li>A lefordítható szöveg mennyisége korlátozásának megszüntetése.</li>
<li>Gyorsbillentyű hozzáadása a Gyorsfordító menüjének eléréséhez.</li>
<li>Az automatikus felismerés a legelső a forrásnyelv listában, a célnyelvéből
pedig hiányzik.</li>
<li>Egy jelölőnégyzet hozzáadása a fordítás eredményének konfigurálásához.</li>
<li>A konfigurációs fájl a beállítások főmappájában található.</li>
<li>A forrás és célnyelv már a Google-nek megfelelő formátumban kerül
elküldésre (2015 április22)</li>
</ul>
<h2>A 2.1 verzió változásai</h2>
<ul>
<li>Mostantól a kiegészítő képes a vágólapon lévő szöveg lefordítására is az
nvda+shift+y billentyűparanccsal.</li>
</ul>
<h2>A 2.0 verzió változásai</h2>
<ul>
<li>Grafikus ablak hozzáadása, ahol kiválasztható a forrás és a célnyelv.</li>
<li>A kiegészítő menüjének hozzáadása a beállítások menühöz.</li>
<li>A beállítások mostantól egy elkülönített konfigurációs fájlba íródnak.</li>
<li>A fordítás eredménye automatikusan a vágólapra kerül, így később ez
könnyen használható.</li>
</ul>
<h2>Az 1.0 verzió változásai</h2>
<ul>
<li>Első változat</li>
</ul>
Karakter felismerőhttp://addons.nvda-project.org/addons/ocr.hu.html2023-05-10T20:38:33Z2013-01-23T06:25:19Z
<ul>
<li>Authors: NV Access Limited, Lukasz Golonka and other contributors</li>
<li>NVDA compatibility: 2019.3 and beyond</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=ocr">Stable version</a></li>
<li>Download <a href="https://www.nvaccess.org/files/nvda-addons/ocr_0.20120529.01.nvda-addon">version compatible with NVDA 2019.2 and older</a></li>
</ul>
<p>Important: if you are using NVDA 2017.3 or later on Windows 10, please
consider using built-in Windows 10 OCR.</p>
<p>Performs optical character recognition (OCR) to extract text from an object
which is inaccessible. The Tesseract OCR engine is used. To perform OCR,
move to the object in question using object navigation and press NVDA+r. You
can set the OCR recognition language by going to the NVDA settings panel and
selecting OCR settings. The keyboard shortcut can be reassigned from NVDA
input gestures dialog in the "Miscellaneous" category.</p>
<h2>Change log:</h2>
<h3>Changes for 2.1:</h3>
<ul>
<li>When recognition is performed on an edit field it is now possible to
navigate it with the system caret without moving focus from it and back
again.</li>
<li>Tesseract release info is no longer written to the focused console.</li>
<li>When no text is recognized this fact is announced to the user.</li>
<li>It is no longer possible to attempt recognition on an invisible object.</li>
<li>WX is now used to capture images instead of Pillow.</li>
</ul>
<h3>Changes for 2.0:</h3>
<ul>
<li>Compatibility with NVDA 2019.3 and later.</li>
<li>It is possible to set different recognition languages for different
configuration profiles.</li>
<li>OCR settings can now be changed from NVDA settings dialog rather than from
a separate dialog in the tools menu.</li>
</ul>
Extended Winamphttp://addons.nvda-project.org/addons/extendedWinamp.hu.html2023-05-10T20:38:33Z2013-01-16T02:37:38Z
<ul>
<li>Authors: Hrvoje Katic, Beqa Gozalishvili and NVDA-addon-team</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=extendedWinamp">stable version</a></li>
<li>NVDA compatibility: 2020.1 and beyond</li>
</ul>
<p>This add-on extends the original Winamp app module found in NVDA with some
extra functionality.</p>
<ul>
<li>S: toggle shuffle on/off</li>
<li>R: toggle repeat on/off</li>
<li>F5: mute playback</li>
<li>F6: set playback volume to 25%</li>
<li>F7: set playback volume to 50%</li>
<li>F8: set playback volume to 100%</li>
<li>Shift+Left arrow: pan Left</li>
<li>Shift+Right arrow: pan Right</li>
<li>Shift+Up arrow: pan Center</li>
<li>Control+Shift+T: speaks total Track Length</li>
<li>Control+Shift+E: speaks track Elapsed Time</li>
<li>Control+Shift+R: speaks track Remaining Time</li>
<li>Shift+R: Review the end of track "last 6 seconds by default"</li>
<li>Control+R: Set the review time "in seconds" for use with Review End of
Track command</li>
<li>Shift+J: Set alternate jump time "in seconds"</li>
<li>Control+Right arrow: alternate Jump Forward "6 seconds by default"</li>
<li>Control+Left arrow: alternate Jump Backward "6 seconds by default"</li>
</ul>
<h2>Changes for 2.0</h2>
<ul>
<li>Resolved many coding style issues and potential bugs with Flake8.</li>
<li>Made compatible with NVDA 2021.1.</li>
</ul>
<h2>Changes for 1.2</h2>
<ul>
<li>Updated Addon to work on NVDA 2019.3 and above.</li>
<li>New languages: Croatian, Polish, Simplified Chinese.</li>
</ul>
<h2>Az 1.1 verzió változásai</h2>
<ul>
<li>Új nyelvek: Aragóniai, Arab, Holland, Német, Finn, Francia, Galíciai,
Magyar, Olasz, Japán, Kóreai, Nepáli, Brazil Portugál, Orosz, Szlovák,
Szlovén, Spanyol, Tamil, Török.</li>
</ul>
<h2>Az 1.0 verzió változásai</h2>
<ul>
<li>Első verzió</li>
</ul>
dropboxhttp://addons.nvda-project.org/addons/dropbox.hu.html2023-05-10T20:38:33Z2012-10-06T13:32:56Z
<ul>
<li>Fejlesztők: Patrick ZAJDA, Filaos és egyéb közreműködők</li>
<li>NVDA compatibility: NVDA 2019.1 or later</li>
<li>Letöltés <a href="https://www.nvaccess.org/addonStore/legacy?file=dropbox">stabil verzió</a></li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=dx-dev">development version</a></li>
</ul>
<p>This plugin add a shortcut to announce Dropbox status or open the Dropbox
systray menu when pressed once or twice respectively. It also enhances
DropBox item lists.</p>
<ul>
<li>Parancsbillentyű: NVDA+Alt+D</li>
</ul>
<h2>Changes for 4.6</h2>
<ul>
<li>Specify NVDA 2021.1 compatibility</li>
</ul>
<h2>Changes for 4.4</h2>
<ul>
<li>Python 3 compatibility</li>
<li>Use the last addon template</li>
<li>Repository change to be built with Appveyor</li>
<li>Fixed wrong and removed unused shortcuts in the documentation</li>
<li>Update the description in the documentation which still referenced the
announcement of the version</li>
</ul>
<h2>A 4.0 verzió változásai</h2>
<ul>
<li>A bővítmény súgója elérhető a bővítménykezelőben.</li>
<li>A dropbox állapotának lekérdezésére szolgáló gyorsgomb Alt+NVDA+D lett,
hogy ne ütközzön a hangerő-igazítás beállításával.</li>
</ul>
<h2>A 3.1 verzió változásai</h2>
<ul>
<li>Más módszer a lapfül és a mégse gomb megállapításához. Most már nem kell a
fókuszt rájuk helyezni billentyűparancsok használatakor.</li>
<li>Ha az aktív fület megváltoztatja, a fókusz a tulajdonságlapra lép, így a
tab megnyomása esetén az első elem lesz aktív a fülön, nem pedig a
legutoljára használt fül. Ez akkor is működik, ha a lapfül vezérlő nincs a
fókuszban.</li>
<li>A beállítások párbeszédablakon már a ctrl+page up/down billentyűparanccsal
is lehetőség van a lapfülek közötti navigációra. A ctrl+tab és
ctrl+shift+tab úgyszintén működik.</li>
<li>Az összes lefordított manifest fájl működik.</li>
<li>Kisebb javítások</li>
</ul>
<h2>A 3.0 verzió változásai</h2>
<ul>
<li>Kisebb javítások az eredeti manifest fájlban (a készítők nevei helyesen
jelennek meg)</li>
<li>A helyi menü elérésének fejlesztése, amikor a Shift+NVDA+D
billentyűparancsot háromszor lenyomják.</li>
<li>Az escape gomb csak akkor működik, ha a Dropbox azt a nyelvet használja
mint az NVDA</li>
<li>Rengeteg javítás a kódban</li>
<li>A szkriptek dokumentációjának hozzáadása/frissítése</li>
<li>Új nyelvek: Arab, Brazil portugál, Cseh, Holland, Finn, Galiciai, Német,
Magyar, Japán, Nepáli, Lengyel, Orosz, Spanyol, Szlovák, Tamil, Török.</li>
</ul>
<h2>A 2.0 verzió változásai</h2>
<ul>
<li>Új nyelv: Olasz</li>
<li>A parancsbillentyű háromszori megnyomása a menüben már nem okoz problémát.</li>
</ul>
<h2>Az 1.0 verzió változásai</h2>
<ul>
<li>Az első kiadás</li>
</ul>
Rendszertálca-kilistázóhttp://addons.nvda-project.org/addons/systrayList.hu.html2023-05-10T20:38:33Z2012-10-06T13:32:56Z
<ul>
<li>Authors: Rui Fontes, Rui Batista, Joseph Lee, NVDA Community contributors</li>
<li>Letöltés <a href="https://www.nvaccess.org/addonStore/legacy?file=systrayList">stabil verzió</a></li>
<li>NVDA compatibility: 2019.3 and beyond</li>
</ul>
<p>This add-on allows you to read and activate icons on the system tray or the
task bar, within a list box, for easy access and interaction to those
items. With the add-on installed, press NVDA+f11 once for this dialog to
pop-up with system tray elements, and press twice to display task bar
elements, which are the currently running applications.</p>
<p>Note that you can access the windows system tray in any screen reader
software using the Windows+B, and the task bar by pressing Windows+T. This
plugin is only useful to make the transition from JAWS for Windows smoother
and to avoid some tooltips that may pop-up when cycling through the system
tray with the windows keyboard means.</p>
<h2>Changes for 4.0 - 2020-01-03</h2>
<ul>
<li>Requires NVDA 2019.3 or later.</li>
<li>No more support for Windows versions earlier than Windows 7 Service Pack
<ol>
<li></li>
</ol>
</li>
<li>Add-on has been renamed to "SysTrayList".</li>
<li>Donation request dialog will no longer appear when installing or updating
the add-on.</li>
</ul>
<h2>Changes for 3.2 - 2018-12-24</h2>
<ul>
<li>More code changes to support Python 3.</li>
</ul>
<h2>Changes for 3.1 - 2018-11-24</h2>
<ul>
<li>Internal changes to support future NVDA releases.</li>
</ul>
<h2>Changes for 3.0 - 2018-10-25</h2>
<p>Support for Windows releases earlier than Windows 7 Service Pack 1 will end
in 2019.</p>
<ul>
<li>Add-on is Python 3 compatible.</li>
</ul>
<h2>Changes for 2.0 - 2017-05-20</h2>
<ul>
<li>Systray/taskbar dialog is now centered on screen.</li>
<li>Fixed various user interface issues.</li>
<li>New and updated translations.</li>
</ul>
<h2>Changes for 1.5 - 2015-mm-dd</h2>
<ul>
<li>A bal és jobbegérgombokkal való műveletvégzés javítása.</li>
<li>Add-on help is now available from add-ons manger.</li>
<li>Frissített fordítások</li>
</ul>
<h2>Verzió 1.4 -2013-01-19</h2>
<ul>
<li>NVDA 2012.3 beta 2 vagy újabb verzió használata szükséges</li>
<li>Támogatás kérésének hozzáadása a telepítőhöz</li>
<li>Futó allkalmazások listájának hozzáadása</li>
<li>Új nyelvek: Arab, Bolgár, Holland, Finn, Galíciai, Görög, Magyar, Olasz,
Japán, Koreai, Nepáli, Norvég, Lengyel, Brazil Portugál, Orosz, Szlovák,
Tamil, Hagyományos Kínai.</li>
</ul>
<h2>Verzió 1.3 - 2012-05-25</h2>
<ul>
<li>Átkonvertálva egy kiegészítő csomagra</li>
<li>Francia és Török fordítás.</li>
</ul>
<h2>Verzió 1.2 - 2012-04.25</h2>
<ul>
<li>Spanyol és Német fordítás. Köszönjük!</li>
</ul>
<h2>Verzió 1.1 - 2012-03-20</h2>
<ul>
<li>Hiba javítva: a kiegészítő használhatatlan volt ha a gettext fordítás nem
volt elérhető</li>
</ul>
<h2>Verzió 1.0 - 2012-03-19</h2>
<ul>
<li>Első kiadás</li>
</ul>