Vitajte na stránke s doplnkami pre NVDANVDA Community Addonshttp://addons.nvda-project.org/index.sk.htmlNVDA Community Addonsikiwiki2024-03-27T20:45:25ZCustom Browse Modehttp://addons.nvda-project.org/addons/customBrowseMode.sk.html2024-03-11T05:29:28Z2024-03-10T19:16:56Z
<ul>
<li>Author: Noelia Ruiz Martínez, Ever Solis</li>
</ul>
<p>This add-on is used to activate or deactivate profiles deppending on the
state of browse mode.</p>
<p>Currently, when browse mode is active, a profile named browseMode will be
activated, and it will be deactivated when browse mode becomes inactive.</p>
<p>The browseMode profile will be automatically created if it doesn't exist.</p>
Perky Duckhttp://addons.nvda-project.org/addons/perky.sk.html2024-03-10T19:12:07Z2024-02-15T09:04:01Z
<ul>
<li>Authors: Alejandro Iván Castro Orozco, Noelia Ruiz Martínez</li>
</ul>
<p>This add-on is used to improve the reading experience with Perky Duck,
available at <a href="https://www.duxburysystems.com">https://www.duxburysystems.com</a>.</p>
<h3>Features</h3>
<ul>
<li>Enables NVDA to detect selection changes when UI Automation is disabled in
Perky Duck. Without the add-on, NVDA detects these changes only when UI
Automation is enabled.</li>
<li>Adds the possibility of using the speak typed characters feature of NVDA
in Perky Duck documents.</li>
</ul>
<h3>Commands</h3>
<p>The following commands can be assigned from NVDA's menu, Preferences
submenu, Input gestures dialog, Perky Duck category. This will be available
from Perky Duck documents:</p>
<ul>
<li>Opens the symbols dialog for reading characters typed in Perky. From this
dialog, you can save and choose symbols dictionaries.</li>
<li>Shows the selected text converted to braille using symbols for the current
language.</li>
<li>Shows the selected text in browse mode.</li>
</ul>
Custom Notificationshttp://addons.nvda-project.org/addons/customNotifications.sk.html2024-02-13T14:38:14Z2024-02-08T18:50:45Z
<ul>
<li>Authors: José Fischer, Noelia Ruiz Martínez</li>
</ul>
<p>This add-on is used to customize toast notifications.</p>
<p>You can choose to read the whole notification or just the application which
sends it, and if notifications will be spoken, displayed in braille or both.</p>
<h2>Settings</h2>
<p>Go to NVDA's menu, Preferences submenu, Settings, and select the Custom
Notifications category. There you'll find the following controls:</p>
<ul>
<li>A checkbox to choose if notifications should be truncated, checked by
default.</li>
<li>An edit box to set the start limit of notifications, empty by default.</li>
<li>An edit box to set the end limit of notifications, ", " (comma space) by
default.</li>
<li>A list of checkboxes to select if notifications should be spoken and
displayed in braille, both checked by default.</li>
<li>An edit box to type a text to send a test notification, to get an idea of
how NVDA will present toasts.</li>
<li>If the previous edit box contains text, a button to send a notification,
so you can test if your selected settings work fine for you.</li>
</ul>
<p>You can assign a gesture to open the add-on settings panel, and to toggle
various add-on settings, from NVDA's menu, Preferences submenu, Input
gestures dialog, Configuration category.</p>
<h2>Changes for 2.0.0</h2>
<ul>
<li>In the add-on settings panel, added an edit box to set the start limit of
notifications.</li>
</ul>
Remote Desktop Accessibilityhttp://addons.nvda-project.org/addons/rdAccess.sk.html2023-08-29T16:58:22Z2023-07-27T14:08:30Z
<ul>
<li>Authors: <a href="https://github.com/leonardder/">Leonard de Ruijter</a></li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=rdAccess">latest stable version</a></li>
<li>NVDA compatibility: 2023.2 and later</li>
</ul>
<p>The RDAccess add-on (Remote Desktop Accessibility) adds support to access
remote desktop sessions to NVDA using Microsoft Remote Desktop, Citrix or
VMware Horizon. When installed in NVDA on both the client and the server,
speech and braille generated on the server will be spoken and brailled by
the client machine. This enables a user experience where managing a remote
system feels just as performant as operating the local system.</p>
<h2>Features</h2>
<ul>
<li>Support for Microsoft Remote Desktop, Citrix and VMware Horizon</li>
<li>Speech and braille output</li>
<li>Automatic detection of remote braille using NVDA's automatic braille
display detection</li>
<li>Automatic detection of remote speech using a dedicated detection process
that can be disabled in NVDA's settings dialog</li>
<li>Support for portable copies of NVDA running on a server (additional
configuration required for Fitrix)</li>
<li>Full support for portable copies of NVDA running on a client (no
additional administrative privileges required to install the add-on)</li>
<li>Multiple active client sessions at the same time</li>
<li>Remote desktop instantly available after NVDA start</li>
<li>Ability to control specific synthesizer and braille display settings
without leaving the remote session</li>
<li>Ability to use speech and braille from the user session when accessing
secure desktops</li>
</ul>
<h2>Changelog</h2>
<h3>Version 1.0</h3>
<p>Initial stable release.</p>
<h2>Getting started</h2>
<ol>
<li>Install RDAccess in both a client and server copy of NVDA.</li>
<li>The remote system should automatically start speaking using the local
speech synthesizer. If not, in the NVDA instance on the server, select
the remote speech synthesizer from NVDA"s synthesizer selection dialog.</li>
<li>To use braille, enable automatic braille display detection using the
braille display selection dialog.</li>
</ol>
<h2>Configuration</h2>
<p>After installation, the RDAccess add-on can be configured using NVDA's settings dialog, which can be accessed from the NVDA Menu by choosing Preferences > Settings...
After that, choose the Remote Desktop category.</p>
<p>This dialog contains the following settings:</p>
<h3>Enable remote desktop accessibility for</h3>
<p>This list of check boxes controls the operating mode of the add-on. You can
choose between:</p>
<ul>
<li>Incoming connections (Remote Desktop Server): Choose this option if the
current instance of NVDA is running on a remote desktop server</li>
<li>Outgoing connections (Remote Desktop Client): Choose this option if the
current instance of NVDA is running on a remote desktop client that
connects to one or more servers</li>
<li>Secure Desktop pass through: : Choose this option if you want to use
braille and speech from the user instance of NVDA when accessing the
secure desktop. Note that for this to work, you need to make the RDAccess
add-on available on the secure desktop copy of NVDA. For this, choose "Use
currently saved settings during sign-in and on secure screens (requires
administrator privileges)" in NVDA's general settings.</li>
</ul>
<p>To ensure a smooth start with the add-on, all options are enabled by
default. You are however encouraged to disable server or client mode as
appropriate.</p>
<h3>Automatically recover remote speech after connection loss</h3>
<p>This option is only available in server mode. It ensures that the connection
will automatically be re-established when the Remote Speech synthesizer is
active and the connection is lost. The behavior is very similar to that of
braille display auto detection. This also clarifies why there is only such
an option for speech. The reconnection of the Remote Braille display is
automatically handled when choosing the Automatic option from the Braille
Display Selection dialog.</p>
<p>This option is enabled by defalt. You are strongly encouraged to leave this
option enabled if the Remote Desktop server has no audio output.</p>
<h3>Allow remote system to control driver settings</h3>
<p>This client option, when enabled, allows you to control driver settings
(such as synthesizer voice and pitch) from the remote system. This is
especially useful when you have difficulties accessing the local NVDA menu
when controlling a remote system. Changes performed on the remote system
will automatically be reflected locally.</p>
<p>While enabling this option implies some performance degradation, you are yet
advised to enable it. When this option is disabled, speech synthesizer
ppitch changes for capitals don't work.</p>
<h3>Persist client support when exiting NVDA</h3>
<p>This client option is only available on installed copies of NVDA. When
enabled, it ensures that the client portion of NVDA is loaded in your remote
desktop client, even when NVDA is not running.</p>
<p>To use the client portion of RDAccess, several changes have to be maede in
the Windows Registry. The add-on ensures that these changes are made under
the profile of the current user. These changes don't require administrative
privileges. Therefore, NVDA can automatically apply the necessary changes
when loaded, and undo these changes when exiting NVDA. This ensures that
the add-on is fully compatible with portable versions of NVDA.</p>
<p>This option is disabled by default. However, if you are running an
installed copy and you are the only user of the system, you are advised to
enable this option. This ensures smooth operation in case NVDA is not
active when connecting to a remote system and is then started afterwards.</p>
<h3>Enable Microsoft Remote Desktop support</h3>
<p>This option is enabled by default and ensures that the client portion of
RDAccess is loaded in the Microsoft Remote Desktop client (mstsc) when
starting NVDA. Unless persistent client support is enabled by enabling the
previous option, these changes will be automatically undone when exiting
NVDA.</p>
<h3>Enable Citrix Workspace support</h3>
<p>This option is enabled by default and ensures that the client portion of
RDAccess is loaded in the Citrix Workspace app when starting NVDA. Unless
persistent client support is enabled by enabling the previous option, these
changes will be automatically undone when exiting NVDA.</p>
<p>This option is only available in the following cases:</p>
<ul>
<li>Citrix Workspace is installed. Note that the Windows Store version of the
app is not supported due to limitations in that app itself</li>
<li>It is possible to register RDAccess under the current user context. After
installing the app, you have to start a remote session once to make this
possible</li>
</ul>
<h2>Citrix specific instructions</h2>
<p>There are some important points of attention when using RDAccess with the
Citrix Workspace app.</p>
<h3>Client side requirements</h3>
<ol>
<li>The Windows Store variant of the app is <em>not</em> supported.</li>
<li>After installing Citrix Workspace, you have to start a remote session
once to allow RDAccess registering itself. The reason behind this is that
the application copies the system configuration to the user configuration
when it establishes a session for the first time. After that, RDAccess
can register itself under the current user context.</li>
</ol>
<h3>Server side requirement</h3>
<p>In Citrix Virtual Apps and Desktops 2109, Citrix enabled the so called
virtual channel allow list. This means that third party virtual channels,
including the channel required by RDAccess, is not allowed by default. For
more information, <a href="https://www.citrix.com/blogs/2021/10/14/virtual-channel-allow-list-now-enabled-by-default/">see this Citrix blog
post</a></p>
<p>Explicitly allowing the RdPipe channel required by RDAccess is not yet
tested. For now, it is probably your best bet to disable the allow list
altogether. If your system administrator is unhappy with this, feel free to
<a href="https://github.com/leonardder/rdAccess/issues">drop a line in the devoted issue</a></p>
<h2>Issues and contributing</h2>
<p>If you want to report an issue or contribute, take a look at <a href="https://github.com/leonardder/rdAccess/issues">the issues
page on Github</a></p>
<h2>External components</h2>
<p>This add-on relies on <a href="https://github.com/leonardder/rd_pipe-rs">RD Pipe</a>, a library written in Rust backing the
remote desktop client support. RD Pipe is redistributed as part of this
add-on under the terms of <a href="https://github.com/leonardder/rd_pipe-rs/blob/master/LICENSE">version 3 of the GNU Affero General Public
License</a> as published by the Free Software Foundation.</p>
WhatsAppPlushttp://addons.nvda-project.org/addons/whatsAppPlus.sk.html2023-06-12T14:03:02Z2023-06-11T16:37:15Z
<ul>
<li>Author: Kostya Gladkiy (Ukrain)</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=whatsAppPlus">stable version</a> (Compatible with NVDA 2021.2 to 2023.1)</li>
<li><a href="https://t.me/unigramPlus">Telegram channel</a></li>
</ul>
<h2>About</h2>
<p>This add-on makes it easy to use the UWP version of the WhatsApp app,
allowing users to easily interact with chats, messages, context menu items,
and more.</p>
<h3>General features</h3>
<ul>
<li>When replying to a message, the edit field will change the title.</li>
<li>Added accessibility labels for some WhatsApp elements.</li>
<li>A large number of keyboard shortcuts have been added to work productively
and comfortably in WhatsApp, which can be found below.</li>
</ul>
<h2>Keyboard shortcuts:</h2>
<ul>
<li>ALT+1: Move focus to chat list.</li>
<li>ALT+2: Move focus to the last message in an open chat.</li>
<li>ALT+D: Move the focus to the edit field. If the focus is already in the
edit field, then after pressing the hotkey, it will move to where it was
before.</li>
<li>ALT+T: Announce the name and status of an open chat.</li>
<li>ALT+shift+C: Make a voice call to a group or contact, or join an ongoing
voice call in a group.</li>
<li>ALT+shift+V: Make a video call to a contact or group.</li>
<li>ALT+shift+Y: Accept call.</li>
<li>ALT+shift+N: Decline an incoming call or leave the current call.</li>
<li>ALT+A: Turn the microphone on/off.</li>
<li>ALT+V: Turn video on/off.</li>
<li>ALT+O: Press more options button.</li>
<li>control+R: Record and send a voice message.</li>
<li>control+D: Discard reply to a message or currently recorded voice message.</li>
<li>control+shift+D: Pause/resume voice message recording.</li>
<li>ALT+delete: Delete a message or chat.</li>
<li>control+shift+P: Open current chat profile.</li>
<li>control+shift+E: Toggles the feature that removes the reading of the user
number in messages from users whose number is not saved in the contact
list.</li>
<li>ALT+S: Star message.</li>
<li>ALT+F: Forward message.</li>
<li>ALT+R: Reply to message.</li>
<li>ALT+shift+R: Mark a chat as read.</li>
<li>control+C: Copy the message if it contains text.</li>
<li>ALT+C: Show message text in popup window.</li>
<li>NVDA+control+W: Open WhatsAppPlus settings window.</li>
<li>ALT+3: Move focus to "unread messages" label.</li>
<li>control+shift+A: Press the attach file button.</li>
<li>ALT+L: Enable automatic reading of new messages in the current chat.</li>
<li>control+S: Increase/decrease the playback speed of voice messages.</li>
<li>ALT+P: Play/pause a voice message that is playing.</li>
<li>ALT+U: announce the current value of a progress bar. If pressed twice,
turns on/off the automatic announcement of progress bars.</li>
<li>control+space: Switch to selection mode.</li>
</ul>
<h3>Information about the opportunity to donate to the developer:</h3>
<p>If you have a desire, and most importantly, the opportunity to support the
developer of this add-on, you can do it using the following details:</p>
<ul>
<li>PayPal: gladkiy.kostya@gmail.com.</li>
<li><a href="https://unigramplus.diaka.ua/donate">Ukrainian donation system</a></li>
<li>Card number: 5169360009004502 (Gladkiy Constantine).</li>
</ul>
<h2>Changelog</h2>
<h3>Version 1.9.0</h3>
<ul>
<li>Added a keyboard shortcut that opens a list of all WhatsAppPlus keyboard
shortcuts. By default, this function is assigned to ALT+H gesture.</li>
<li>Fixed a bug where ALT+2 and ALT+3 gestures didn't work.</li>
<li>Fixed a bug where it was impossible to activate some functions from the
context menu using gestures.</li>
<li>Fixed an issue where changing voice message playback speed and pausing
voice message playback did not always work.</li>
<li>Fixed a bug where in chats when focusing on your sent messages, instead of
the word "you", the screen reader announced a personal number. To avoid
this, you need to specify the phone number in the WhatsAppPlus settings
and after that the add-on will not report it on your messages.</li>
<li>Fixed an issue where WhatsAppPlus prompted to update on secure screens. To
prevent this from happening again, you need to click on the "Use currently
saved settings during sign-in and on secure screens (requires
administrator privileges)" button in the NVDA general settings.</li>
<li>The gesture to accept a call has been changed to ALT+shift+Y, and the
gesture to decline a call has been changed to ALT+shift+N. This is to
ensure that these gestures do not conflict with UnigramPlus gestures.</li>
<li>Microphone and camera on/off gestures during a call now work correctly.</li>
<li>Removed gesture to set reaction to messages, since in the latest versions
of WhatsApp, reactions are available directly from the context menu.</li>
</ul>
<h3>Version 1.8.0</h3>
<ul>
<li>The add-on has been tested to ensure compatibility with NVDA-2023.</li>
<li>Added a keyboard shortcut for selecting messages. To enter selection mode,
press Ctrl+Space, and then use Space to select the next message.</li>
<li>A new function has been added to automatically announce activity in an
open chat. By default, this feature is enabled by double-pressing the
ALT+T gesture. This helps users stay up to date with new messages and
other chat activities.</li>
<li>The automatic reading of new chat messages has been significantly
redesigned to be more stable. This ensures that users are alerted to new
messages accurately and reliably.</li>
<li>Added labels for some unlabeled buttons.</li>
</ul>
<h3>Version 1.7.0</h3>
<ul>
<li>Added a function that automatically announces the progress bar if the
focus is on a message.</li>
<li>Added a keyboard shortcut to report the value of the progress bar when the
focus is on a message. By default, the ALT+U gesture is assigned to this
feature. If the gesture is pressed twice, the automatic announcement of
the progress bar values will be enabled.</li>
<li>Fixed an issue where focus could not be moved to the chat list.</li>
<li>Added labels to some elements.</li>
</ul>
<h3>Version 1.6.0</h3>
<ul>
<li>Added ability to quickly reply to group members. To enter a message, it is
enough to write the symbol "@" in the message entry field, use the up and
down arrows to select who you want to reply to, and then press the Enter
key.</li>
<li>Added ability to quickly insert emoticons. To do this, you must write a
colon and the name of the emoticon you want to find in the message input
field. Later, use the left and right arrow keys to find the desired
emoticon and use the Enter key to insert it into the message input field.</li>
<li>In the WhatsAppPlus settings, an option has been added to enable the
playback of sounds when recording, pausing and sending voice messages.</li>
<li>Changed the keyboard shortcut for opening the profile of the current
conversation to Control+Shift+P.</li>
<li>Added Nepali localization.</li>
<li>Fixed several bugs, including an issue where automatic reading of new
messages in an open conversation was not working for some users.</li>
</ul>
<h3>Version 1.5.0</h3>
<ul>
<li>Added a keyboard shortcut to change the speed of the voice message being
played. The default gesture is ctrl+s. The gesture will only work when a
voice message is playing in an open chat.</li>
<li>Added a keyboard shortcut to pause a voice message that is playing. The
default gesture is alt+p. The function will only work when a voice message
is playing in an open chat.</li>
<li>Now the announcement of a new message in an open chat can be enabled not
only until NVDA is restarted, but also forever.</li>
</ul>
<h3>Version 1.4.0</h3>
<ul>
<li>Adapted to the latest version of WhatsApp.</li>
<li>Added automatic reading of new messages in open chat. By default, this
feature is activated by pressing ALT+L. The feature remains active only
until NVDA is restarted. May have stability issues if there are too many
new messages.</li>
<li>Added French localization.</li>
</ul>
<h3>Version 1.3.0</h3>
<ul>
<li>The description of the links attached to the message will now be read.</li>
<li>Now the duration of voice messages will be announced.</li>
<li>You can now open links attached to messages with the spacebar</li>
<li>Added labels for some interface elements</li>
<li>Adapted to the latest version of WhatsApp so that all functions work
properly.</li>
<li>Fixed some bugs</li>
</ul>
<h3>Version 1.2.0</h3>
<ul>
<li>Now, when you focus on a message written in reply to another message, the
text of that message will be spoken first and then the text of the message
to which it was sent.</li>
<li>The name and type of files sent in the conversation will now be spoken.</li>
<li>ALT+1 now works even when the chat archive or the selected messages
section is open.</li>
<li>ALT + left arrow helps to close the chat archive or the selected messages
list if they are open.</li>
<li>Now, pressing control+D, in addition to cancelling voice messages, also
cancels the reply to the message.</li>
<li>Information about the impossibility of recording a voice message will now
be reported when the message input field is not empty. This will fix an
issue where pressing Ctrl+R would send a text message instead of starting
to record a voice message.</li>
<li>Added labels for unlabeled elements.</li>
</ul>
<h3>Version 1.1.0</h3>
<ul>
<li>Added keyboard shortcut to navigate to unread messages. Since this feature
is language dependent, this feature can be configured in the WhatsAppPlus
settings.</li>
<li>Added keyboard shortcut for pressing the new chat button.</li>
<li>Added keyboard shortcut for pressing the attach file button.</li>
<li>NVDA will no longer announce the recording control buttons when recording
a voice message.</li>
<li>Added Arabic, Italian, Romanian, Serbian, Croatian, Spanish and Turkish
localizations.</li>
<li>Added labels for some unlabeled elements.</li>
<li>Now information about the reaction to the message will be announced when
focusing on the message.</li>
<li>Now, when playing your own voice messages using the spacebar, a pop-up
window will not appear.</li>
<li>Fixed minor bugs.</li>
</ul>
NVDA Dev & Test Toolboxhttp://addons.nvda-project.org/addons/nvdaDevTestToolbox.sk.html2024-02-16T08:51:25Z2023-06-05T11:56:08Z
<ul>
<li>Author: Cyrille Bougot</li>
<li>NVDA compatibility: 2019.2 and beyond</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=nvdaDevTestToolbox">stable version</a></li>
</ul>
<p>This add-on gathers various features for NVDA debugging and testing.</p>
<h2>Features</h2>
<ul>
<li>An enhanced restart dialog to specify some extra options when restarting
NVDA.</li>
<li>Various features related to logged errors.</li>
<li>An object property explorer.</li>
<li>An extended script description mode: when enabled input help mode report
information on scripts that have no description.</li>
<li>Commands to help log reading and analyzing.</li>
<li>Backups of old logs</li>
<li>In the Python console workspace, a function to open the source code of an
object.</li>
<li>A custom startup script for the Python console</li>
<li>A command to log the stack trace of the speech.speak function.</li>
</ul>
<h2>Enhanced restart dialog</h2>
<p>The NVDA+shift+Q command opens a dialog to specify some extra options before
restarting NVDA. The options that can be specified correspond to the
<a>command line options</a> that can be used with <code>nvda.exe</code>, e.g. <code>-c</code> for
config path, <code>--disable-addons</code> to disable add-ons, etc.</p>
<h2>Features related to logged errors</h2>
<h3>Report last logged error</h3>
<p>Pressing NVDA+shift+alt+E allows to report the last error logged without
needing to open the log. A second press clears the memorized last error.</p>
<h3>Play a sound for logged errors</h3>
<p>The <a>"Play a sound for logged errors" setting</a> has been introduced in
NVDA 2021.3 and allows to specify if NVDA will play an error sound in case
an error is logged.</p>
<p>This add-on provides an additional command (NVDA+control+alt+E) to toggle
this setting. You can choose:</p>
<ul>
<li>"Only in test versions" (default) to make NVDA play error sounds only if
the current NVDA version is a test version (alpha, beta or run from
source).</li>
<li>"Yes" to enable error sounds no matter your current NVDA version.</li>
</ul>
<p>For NVDA prior to 2021.3, this add-on provides the backport of this feature
and the possibility to control it with the keyboard command. The checkbox
in the Advanced settings panel is not backported however.</p>
<h2>Object property explorer</h2>
<p>This feature allows to report some properties of the current navigator
object without opening the log viewer.</p>
<p>To list the properties of an object, move the navigator object to it and use
the following commands:</p>
<ul>
<li>Selects the previous property and reports it for the navigator object.</li>
<li>Selects the next property and reports it for the navigator object.</li>
<li>Reports the currently selected property for the navigator object; two
presses displays this information in a browseable message.</li>
</ul>
<p>The list of the supported properties is the following: name, role, state,
value, windowClassName, windowControlID, windowHandle, location, Python
class, Python class mro.</p>
<p>When using object navigation commands, you can also choose to have the
currently selected property reported instead of NVDA usual object
reporting. A toggle command allows to switch between this custom reporting
of objects and NVDA usual reporting.</p>
<p>For exemple, you may select "windowClassName" property and enable custom
object reporting. Then when moving the navigator object to next or previous
object, you will hear the object's windowClassName instead of usual
reporting.</p>
<p>All the commands of the Object property explorer are unassigned by default;
you will have to assign them a shortcut in the Input gesture dialog to use
them.</p>
<h2>Extended script description mode</h2>
<p>When the Extended script description mode is active, the input help mode
(NVDA+1) is modified as follows. If a script has no description, the
script's name and class are reported. If a script has a description, its
description is reported as usual. The gesture to activate or deactivate
this feature is NVDA+control+alt+D.</p>
<p>Executing a gesture bound to a script without description in input help mode
also create an entry for this script in the gesture management dialog. This
entry is located in a dedicated category called "Scripts without description
(modify at your own risk!)". This allow to easily add, delete or change the
native NVDA gestures for these script. Be aware however that it is often
intended that such script do not have any description to prevent the user to
modify the associated gesture. Indeed, the gesture may be defined to match
an application shortcut key. For example the script script_toggleItalic on
NVDAObjects.window.winword.WordDocument is bound to control+I and this
should not be modified since the gesture is passed to the application to
actually execute the shortcut key.</p>
<h3>Usage example</h3>
<p>Control+shift+I also toggle italic in Word, even if it is not natively
reported by NVDA. To have the control+shift+I result reported by NVDA as
control+I, you should perform the following steps:</p>
<ul>
<li>Open a Word document.</li>
<li>Enable the extended script description mode with NVDA+control+alt+D.</li>
<li>Enter input help mode with NVDA+1.</li>
<li>Press control+I to report the italic script and have it added in the
gesture dialog.</li>
<li>Exit input help mode with NVDA+1.</li>
<li>Open the input gestures dialog.</li>
<li>In the category "Scripts without description (modify at your own risk!)",
select the command "toggleItalic on
NVDAObjects.window.winword.WordDocument".</li>
<li>Add the control+shift+I shortcut and validate.</li>
<li>If you want, exit the extended script description mode with
NVDA+control+alt+D.</li>
</ul>
<p>Known bug: A script added for a specific class is visible even if gesture
manager is opened in another context.</p>
<h2>Log reading and analyzing features</h2>
<p><a id="logPlaceMarkers"></a></p>
<h3>Place markers in the log</h3>
<p>While testing or working, you may want to mark a specific moment in the log, so that you can turn to it easily later when reading the log.
To add a marker message in the log, press NVDA+control+K.
A message as follows will be logged at INFO level:<br />
<code>-- NDTT marker 0 --</code><br />
You can add as many markers as you want in the log. The marker's number
will be incremented each time you place a marker in the log; it will only be
reset when NVDA is restarted.</p>
<h3>Log reader mode</h3>
<p>A log reader mode provides commands to ease log reading and analyzing. In
the log viewer window the log reader is enabled by default, thus log reading
commands are available immediately. In another text reading area such as an
editor (e.g. Notepad++) or a webpage (e.g. GitHub issue), you need to press
NVDA+control+alt+L to enable log reader mode and use its commands. When you
are done with log reading and analyzing tasks, you can disable again
NVDA+control+alt+L to disable the log reader mode.</p>
<p>The commands available in log reader mode are described hereafter.</p>
<p><a id="logReaderQuickNavigationCommands"></a></p>
<h4>Quick navigation commands</h4>
<p>Single letter command similar to browse mode quick navigation keys allow to
move to various type of log messages:</p>
<ul>
<li>m: any message</li>
<li>e: error messages (<code>ERROR</code> and <code>CRITICAL</code>)</li>
<li>w: warning messages (<code>WARNING</code>)</li>
<li>f: info messages (<code>INFO</code>)</li>
<li>k: markers previously <a href="http://addons.nvda-project.org/index.sk.html#logPlaceMarkers">placed in the log</a></li>
<li>g: debug warning messages (<code>DEBUGWARNING</code>)</li>
<li>i: input/output messages (<code>IO</code>)</li>
<li>n: input messages</li>
<li>s: speech messages</li>
<li>d: debug messages (<code>DEBUG</code>)</li>
</ul>
<p>Pressing the single letter moves to the next occurrence of this
message. Combining the letter with the shift key moves to the previous
occurrence of this message.</p>
<h4>Translation of speech message</h4>
<p>Sometimes, you may have to look at a log taken on a system in a foreignh
language that you do not understand. E.g. the log was taken on a Chinese
system / NVDA, whereas you only understand French. If you have <a href="https://addons.nvda-project.org/addons/instantTranslate.en.html">Instant
Translate</a> add-on installed, you may use it in conjonction with <a href="http://addons.nvda-project.org/index.sk.html#logReaderQuickNavigationCommands">quick
log navigation commands</a> to have speech
messages translated.</p>
<ul>
<li>First configure Instant Translate's languages. The source language should
be the language of the system where the log has been taken
(e.g. Chinese). The target language should be your language (e.g. French).</li>
<li>Open the log</li>
<li>Press T to enable automatic speech translation in the log</li>
<li>Use Quick navigation commands in the log, e.g. S, I, etc. Whenever a
speech message is encountered, it will be spoken in your language (French
in our previous example)</li>
</ul>
<p>If you want to disable speech translation, press T again.</p>
<p><a id="logReaderOpenSourceFile"></a></p>
<h4>Open the file of the source code in your editor</h4>
<p>In the log some line may refer to the source code:</p>
<ul>
<li>A line belonging to a traceback contains the path and the line in a file,
e.g.:
<code> File "virtualBuffers\__init__.pyc", line 226, in _getStoryLength</code></li>
<li>The header line of a logged message contains the function which has logged
this message, e.g.:
<code>INFO - config.ConfigManager._loadConfig (22:45:26.145) - MainThread (16580):</code></li>
<li>The content of a message logged in input help mode (logged at info level):
Input help: gesture kb(desktop):NVDA+t, bound to script title on globalCommands.GlobalCommands`</li>
</ul>
<p>You may want to open the file containing this code to understand the context
of the traceback or the logged message. Just press C to open this file.</p>
<p>For this feature to work, you need to have configured your <a href="http://addons.nvda-project.org/index.sk.html#settingsOpenCommand">favorite
editor's command</a> in the add-on's settings. If you
are not running NVDA from source, the <a href="http://addons.nvda-project.org/index.sk.html#settingsNvdaSourcePath">location of NVDA source
code</a> should also have been configured.</p>
<p><a id="oldLogsBackup"></a></p>
<h2>Backup of old logs</h2>
<p>NVDA already provides a backup of the log of the previous session of NVDA;
the file is called <code>nvda-old.log</code>. Sometimes however you may want to access
older logs, e.g. because you have had to restart NVDA again before looking
at <code>nvda-old.log</code>. This add-on allows you to configure if you want to
backup old logs and how many of them; this is done in the <a href="http://addons.nvda-project.org/index.sk.html#settingsLogsBackup">add-on's
settings</a>.</p>
<p>A log manager dialog allows to view the backed up logs.
It can be opened going to NVDA menu -> Tools -> Logs manager
In this dialog, you can see the list of all the backup logs, open or delete them.
To be able to open a log, you should first have configured the <a href="http://addons.nvda-project.org/index.sk.html#settingsOpenCommand">Command to open a file in your favorite editor</a>.</p>
<h2>Python console extension</h2>
<p><a id="pythonConsoleOpenCodeFile"></a></p>
<h3><code>openCodeFile</code> function</h3>
<p>In the console, you can call the following function to view the source code that defines the variable <code>myVar</code>:<br />
<code>openCodeFile(myVar)</code></p>
<p>For this feature to work, you need to have configured your <a href="http://addons.nvda-project.org/index.sk.html#settingsOpenCommand">favorite
editor's command</a> in the add-on's settings. If you
are not running NVDA from source, the <a href="http://addons.nvda-project.org/index.sk.html#settingsNvdaSourcePath">location of NVDA source
code</a> should also have been configured.</p>
<p>The <code>openCodeFile</code> functions can be called on objects defined in NVDA's code
or on objects defined by add-ons. It cannot be called on objects whose
source code is not available such as python builtins.</p>
<p>If you have not yet imported the object in the console, you can also pass
its name as parameter to the <code>openCodeFile</code> function.</p>
<p>Below are examples of call in NVDA's code:</p>
<ul>
<li>View the definition of the function <code>speech.speech.speak</code>:
<code>openCodeFile(speech.speech.speak)</code><br />
or with the name passed as parameter:<br />
<code>openCodeFile("speech.speech.speak")</code></li>
<li>View the definition of the class <code>TextInfo</code>:
<code>openCodeFile(textInfos.TextInfo)</code></li>
<li>View the definition of the method <code>copyToClipboard</code> of the class
<code>TextInfo</code>:
<code>openCodeFile(textInfos.TextInfo.copyToClipboard)</code></li>
<li>View the definition of the class of the focused object:
<code>openCodeFile(focus)</code></li>
<li>Open the file <code>api.py</code> defining the module <code>api</code>:
<code>openCodeFile(api)</code></li>
</ul>
<h3>Python console startup script</h3>
<p>You can define a custom script which will be executed in the Python
console's namespace when it is first opened, or if the add-on is reloaded
(NVDA+F3) after the console has already been opened.</p>
<p>For example, the script allows you to execute new imports and define aliases that you will be able to use directly in the console, as shown below:</p>
<pre><code># Various import that I want in the console.
import globalVars as gv
import core
import ui
# Aliases
ocf = openCodeFile
</code></pre>
<p>The Python console script should be placed in the following location: <code>pathToNVDAConfig\ndtt\consoleStartup.py</code><br />
For example:
<code>C:\Users\myUserName\AppData\Roaming\nvda\ndtt\consoleStartup.py</code></p>
<h2>Log the stack trace of the speech function</h2>
<p>Sometimes, you may want to see which part of the code is responsible for
speaking something. For this, you can enable the stack trace logging of the
speech function pressing NVDA+control+alt+S. Each time NVDA speaks, a
corresponding stack trace will be logged in the log.</p>
<p>Note: You may modify the script's file directly to patch another function.
See all instructions in the file for details on usage.</p>
<p><a id="settings"></a></p>
<h2>Settings</h2>
<p>Some features of the add-on may require a specific configuration.
A settings panel allows to enable them or to control how they work.
To view and modify these settings, go to NVDA menu -> Preferences and select the category NVDA Dev & Test Toolbox.
This settings dialog can also be accessed directly from the Logs Manager dialog.</p>
<p>These settings are global and can only be configured when the default
profile is active.</p>
<p><a id="settingsOpenCommand"></a></p>
<h3>Command to open a file in your favorite editor</h3>
<p>Some features allow to see content in your favorite editor. This includes
the commands to view the source file <a href="http://addons.nvda-project.org/index.sk.html#logReaderOpenSourceFile">from a log</a>
or <a href="http://addons.nvda-project.org/index.sk.html#pythonConsoleOpenCodeFile">from an object in the console</a> as well as
the <a href="http://addons.nvda-project.org/index.sk.html#oldLogsBackup">log manager</a>'s Open button.</p>
<p>To use them, you first need to configure the command that will be called to open the file in your favorite editor.
The command should be of the form:<br />
<code>"C:\path\to\my\editor\editor.exe" "{path}":{line}</code><br />
You should of course modify this line according to the real name and location of your editor and the syntax used by it to open files.
<code>{path}</code> will be replaced by the full path of the file to open and <code>{line}</code> by the line number where you want the cursor to be set.
For Notepad++ for example the command to type in the console would be:<br />
<code>"C:\Program Files\Notepad++\notepad++.exe" "{path}" -n{line}</code></p>
<p><a id="settingsNvdaSourcePath"></a></p>
<h3>NVDA source code path</h3>
<p>When using a command to <a href="http://addons.nvda-project.org/index.sk.html#logReaderOpenSourceFile">view the source file from a log</a> or <a href="http://addons.nvda-project.org/index.sk.html#pythonConsoleOpenCodeFile">from an object in the console</a>, the file may belong to NVDA itself.
If you are not running NVDA from source, your NVDA only contains compiled files.
Thus you may specify here an alternate location where the corresponding source file will be found, e.g. the place where you have cloned NVDA source files, so that a source file can be opened anyway.
The path should be such as:<br />
<code>C:\pathExample\GIT\nvda\source</code><br />
Of course, replace the path of NVDA source with the correct one.</p>
<p>Be sure however that the version of your source file (e.g. GIT commit) is
the same as the one of the running instance of NVDA.</p>
<p><a id="settingsLogsBackup"></a></p>
<h3>Backup of old logs</h3>
<p>The combobox Backup of old logs allows to enable or disable the
<a href="http://addons.nvda-project.org/index.sk.html#oldLogsBackup">feature</a>. If it is enabled, you can also specify below in
"Limit the number of backups" the maximum number of backups you want to
keep. These settings only take effect at next NVDA startup when the backup
takes place.</p>
<h2>Change log</h2>
<h3>Version 6.2</h3>
<ul>
<li>Restores console opening for NVDA < 2021.1.</li>
<li>Addresses potential security issues related to <a>GHSA-xg6w-23rw-39r8</a>
when using the add-on with older versions of NVDA. However, it is
recommended to use NVDA 2023.3.3 or higher.</li>
</ul>
<h3>Version 6.1</h3>
<ul>
<li>Opening the source file of an object located in the submodule of a package
is now working.</li>
<li>Bugfix: The enhanced exit dialog can now be reopened and used as expected
after having been closed. (contribution from Łukasz Golonka)</li>
</ul>
<h3>Version 6.0</h3>
<ul>
<li>While using object navigation commands, a specific object property can be
reported instead of NVDA usual object reporting.</li>
<li>In log reading mode, the "C" key to open a code file from the log now also
works on an input help message.</li>
<li>Bugfix: The add-on can now start successfully when the number of logs to
save is set to its maximum value.</li>
<li>Bugfix: Python console startup script's output does not prevent anymore to
jump to the first result in the console when using result navigation
commands.</li>
<li>Note: From now on, localization updates will not appear anymore in the
change log.</li>
</ul>
<h3>Version 5.0</h3>
<ul>
<li>If Instant Translate add-on is installed, it is now possible to have
speech messages translated on the fly when using log reading commands.</li>
<li>While in log reading mode, pressing E or shift+E now jumps to CRITICAL
erorr messages as well as normal ERROR messages.</li>
<li>New log quick navigation commands have been added to jump to input and to
speech messages.</li>
<li>A new command allow to place a marker in the log; and specific quick
navigation commands in log reading mode allow to jump to them. Credit: the
initial idea for this feature comes from Debug Helper add-on by Luke
Davis.</li>
<li>Bubfix: The memorization of the last error do not fail anymore in some
cases.</li>
<li>Bugfix: The add-on can initialize again with NVDA 2019.2.1.</li>
<li>Bugfix: Log saving feature will not fail anymore with non-ASCII logs.</li>
</ul>
<h3>Version 4.2</h3>
<ul>
<li>Fixed an error with NVDA version below 2021.3.</li>
<li>Fixed the stack trace log formatting.</li>
<li>First localizations.</li>
</ul>
<h3>Version 4.1</h3>
<ul>
<li>Fixed a bug occurring in some situations while logging an error.</li>
<li>The add-on's settings can now be modified only when the default profile is
active to avoid config issues.</li>
</ul>
<h3>Version 4.0</h3>
<ul>
<li>Possibility to back up old logs and introduction of a logs manager.</li>
<li>Added a script to report the last logged error.</li>
<li>Fixed a bug preventing last log message to be read in older NVDA versions.</li>
</ul>
<h3>Version 3.2</h3>
<ul>
<li>Compatibility with NVDA 2023.1.</li>
</ul>
<h3>Version 3.1</h3>
<ul>
<li>Fixed an error occurring when requesting unavailable information on an
object.</li>
</ul>
<h3>Version 3.0</h3>
<ul>
<li>In a log, you can now press C on a message's header line to open the
function/module which has emitted it.</li>
<li>In the console, <code>openCodeFile</code> function can now receive as parameter the
object or a string containing its name.</li>
<li>New feature: NVDA console startup file: If it exists, the file
YourNVDAConfigFolder\ndtt\consoleStartup.py will be executed when NVDA
console is first opened or when add-ons are reloaded.</li>
<li>Various minor fixes for <code>openCodeFile</code> Python console's function and the
command to open the source file corresponding to a line in the log.</li>
<li>Fixed an issue when trying to report roles/states for object explorer in
older version of NVDA.</li>
<li>The add-on does not cause a problem anymore with the tree interceptor when
using UIA in Edge.</li>
</ul>
<h3>Version 2.1</h3>
<ul>
<li>Various bugfixes and code refactoring/cleaning to address all use cases:
all supported versions, installed vs. run from source, etc. (contribution
from Łukasz Golonka)</li>
<li>Rewriting of the compa module (contribution from Łukasz Golonka)</li>
<li>The restart dialog can now be opened only once.</li>
<li>The object explorer shortcuts are now unassigned by default and need to be
mapped by the user.</li>
<li>With the object explorer, a double-press to call the script to report the
current object's property now displays the reported information in a
browseable message.</li>
</ul>
<h3>Version 2.0</h3>
<ul>
<li>New feature: Enhanced restart dialog to specify some extra options when
restarting NVDA.</li>
<li>New feature: extended description mode.</li>
<li>Play error sound feature harmonized between pre and post 2021.3 versions
of NVDA.</li>
<li>New feature: Log reader commands are now available in the log viewer and
also optionally in edit fields or webpages.</li>
<li>New feature: In the Python console, an <code>openCodeFile</code> function is
available to view the source code of an object.</li>
<li>Some features are now disabled in secure mode for security reasons.</li>
<li>The add-on's compatibility range has been extended (from 2019.2 to
2021.1).</li>
<li>Releases are now performed with GitHub action instead of appVeyor.</li>
</ul>
<h3>Version 1.0</h3>
<ul>
<li>Initial release.</li>
</ul>
<p>https://www.nvaccess.org/files/nvda/documentation/userGuide.html#CommandLineOptions</p>
<p>https://www.nvaccess.org/files/nvda/documentation/userGuide.html#PlayErrorSound</p>
<p>https://github.com/nvaccess/nvda/security/advisories/GHSA-xg6w-23rw-39r8#event-132994</p>
TesseractOCR: An OCR add-onhttp://addons.nvda-project.org/addons/tesseractOCR.sk.html2024-02-13T14:38:18Z2023-05-12T09:37:38Z
<ul>
<li>Authors: Rui Fontes, Ângelo Abrantes and Abel Passos do Nascimento Jr.</li>
<li>Updated in 04/05/2023</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=tesseractOCR">stable version</a></li>
<li>Compatibility: NVDA version 2019.3 and beyond</li>
</ul>
<h2>Information</h2>
<p>This add-on uses the free and open source Tesseract OCR engine, to perform
optical character recognition on an image file, PDF, JPG, TIF or other,
without the need to open it.</p>
<p>It also allows access to WIA enabled scanners to perform OCR to a paper
document.</p>
<p>In the NVDA menu, Preferences, a TesseractOCR section is added, where you
can configure the following:</p>
<ul>
<li>languages to be used in recognition;</li>
<li>the type of documents to be recognized;</li>
<li>if should be asked or not a PDF password. If you have this option checked,
and the PDF does not have a password, just press Enter in the dialog
asking for password;</li>
<li>Select the scanner to be used;</li>
<li>set the scanner resolution between 150 and 400 dpi.</li>
</ul>
<p>With the exception of English and Portuguese, which are already included in
add-on, the other languages will be downloaded and installed when you select
a language that does not already exist in the add-on.</p>
<p>Note that as the number of selected recognition languages increases, the OCR
process will take longer.</p>
<p>We therefore recommend that you use only the languages you need.</p>
<p>Note also that the quality of recognition may vary according to the order of
languages.</p>
<p>Therefore, if the recognition result is not satisfactory, you may want to
try another language ordering.</p>
<h2>Shortcut</h2>
<p>The default commands are:</p>
<ul>
<li>Windows+Control+r - to recognize the selected document;</li>
<li>Windows+Control+w - to scan and recognize a document through the scanner;</li>
<li>Windows+Control+c - To cancel the scanning process.</li>
</ul>
<p>Please note: It must be issued before the dialog asking if you want to scan
more pages appear!</p>
<p>Then just wait the browseable message appears with the recognized text.</p>
<p>If you want to preserve the recognized text, don't forget to save it in some
folder, as the results are deleted at the start of the next OCR process!</p>
<p>This commands can be modified in the "Input gestures" dialog in the
"TesseractOCR" section.</p>
<h2>Known problems</h2>
<p>When selecting the "Various" option in the "Documents type" combobox, the
recognized text probably appear with many blank lines</p>
<p>This is a known problem with Tesseract, and, without consumming lots of
processing time, I haven't yet found any solution. But, I still haven't
given up!</p>
<h2>Languages supported</h2>
<p>The supported languages in this version are:</p>
<ul>
<li>Afrikans</li>
<li>Albanian</li>
<li>Amharik</li>
<li>Arabic</li>
<li>Armenian</li>
<li>Assamese</li>
<li>Azerbaijani (Latin)</li>
<li>Basque</li>
<li>Belarusian</li>
<li>Bengali</li>
<li>Bosnian</li>
<li>Breton</li>
<li>Bulgarian</li>
<li>Burnese</li>
<li>Catalan/Valencian</li>
<li>Cebuano</li>
<li>Cherokee</li>
<li>Chinese simplified</li>
<li>Chinese traditional</li>
<li>Corsican</li>
<li>Croatian</li>
<li>Czech</li>
<li>Dannish</li>
<li>Deutch</li>
<li>Dhivehi</li>
<li>Dutch (Flemish)</li>
<li>Dzongkha</li>
<li>English</li>
<li>Esperanto</li>
<li>Estonian</li>
<li>Faroese</li>
<li>Filipino</li>
<li>Finnish</li>
<li>French</li>
<li>Galician</li>
<li>Georgian</li>
<li>Greek</li>
<li>Gujarati</li>
<li>Haitian</li>
<li>Hebrew</li>
<li>Hindi</li>
<li>Hungarian</li>
<li>Icelandic</li>
<li>Indonesian</li>
<li>Inuktitut</li>
<li>Irish</li>
<li>Italian</li>
<li>Javanese</li>
<li>Japanese</li>
<li>Kannada</li>
<li>Kazakh</li>
<li>Khmer (Central)</li>
<li>Kirghiz</li>
<li>Korean</li>
<li>Kurdish Kurmanji</li>
<li>Lao</li>
<li>Latin</li>
<li>Lativia</li>
<li>Lituanian</li>
<li>Luxembourgish</li>
<li>Macedonian</li>
<li>Malay</li>
<li>Malayalam</li>
<li>Maltese</li>
<li>Maori</li>
<li>Marathi</li>
<li>Math / equation detection module</li>
<li>Mongolian</li>
<li>Nepali</li>
<li>Norwegian</li>
<li>Occitan</li>
<li>Oriya</li>
<li>Panjabi</li>
<li>Pashto</li>
<li>Persian</li>
<li>Polish</li>
<li>Portuguese</li>
<li>Quechua</li>
<li>Romanian/Moldave</li>
<li>Russian</li>
<li>Sanskrit</li>
<li>Scottish Gaelic</li>
<li>Serbian (Latin)</li>
<li>Slovak)</li>
<li>Slovenian)</li>
<li>Sindhi</li>
<li>Sinhalese</li>
<li>Spanish</li>
<li>Sundanese</li>
<li>Swahili</li>
<li>Swedish</li>
<li>Syriac</li>
<li>Tajik</li>
<li>Tamil</li>
<li>Tatar</li>
<li>Telugu</li>
<li>Thai</li>
<li>Tibetan</li>
<li>Tigrinya</li>
<li>Tonga</li>
<li>Turkish</li>
<li>Uighur</li>
<li>Ukrainian</li>
<li>Urdu</li>
<li>Uzbek (Latin)</li>
<li>Vietnamese</li>
<li>Welsh</li>
<li>West Frisian</li>
<li>Yiddish</li>
<li>Yoruba</li>
</ul>
<h2>Image types supported</h2>
<p>This add-on supports the following types of files:</p>
<ul>
<li>PDF</li>
<li>jpg</li>
<li>tif</li>
<li>png</li>
<li>bmp</li>
<li>pnm</li>
<li>pbm</li>
<li>pgm</li>
<li>jp2</li>
<li>gif</li>
<li>jfif</li>
<li>jpeg</li>
<li>tiff</li>
<li>spix</li>
<li>webp</li>
</ul>
UnigramPlushttp://addons.nvda-project.org/addons/unigramPlus.sk.html2024-02-13T14:35:58Z2023-05-10T21:27:46Z
<ul>
<li>Author: Kostya Gladkiy (Ukrain)</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=unigramPlus">stable version</a> (Compatible with NVDA 2021.2 to 2023.1)</li>
<li><a href="https://t.me/unigramPlus">Telegram channel</a></li>
<li><a href="https://unigramplus.diaka.ua/donate">Donation link</a></li>
<li>PayPal: gladkiy.kostya@gmail.com</li>
</ul>
<h2>about</h2>
<p>Use Unigram in a more comfortable and productive way. This addon provides
many hotkeys for a quick and comfortable use of Unigram and makes a lot of
small improvements.</p>
<h2>Some of the major improvements are:</h2>
<ul>
<li>Adds a significant improvement to the display of messages such as a poll,
a link, or a message with attached media.</li>
<li>When focus enters the list of chats, it removes such phrases as: "chats,
tab, selected list". And when the focus hits the list of messages, the
phrase "list".</li>
<li>The name and size of the file will be spoken when the cursor is focused on
the "Open File" button or the "Download File" button, and when the cursor
is focused on the play button of the audio file, you will hear its name
and duration.</li>
<li>When focus is placed on a voice message that is currently being played,
first information about the time of its playback is announced, and then
all other information.</li>
<li>When the focus is on a message that contains information about a call, the
duration of this call is announced.</li>
<li>When focusing on a selected message in a chat, you will first hear the
information that it is selected, and then the content of the message.</li>
<li>Now, when moving in the chat, the phrase "Seen" will not be pronounced at
all, and the phrase "Not seen" will be pronounced before the content of
the message. This feature currently only works in English, Russian,
Ukrainian, Spanish, Portuguese, Polish, Croatian, Turkish, and Persian.</li>
<li>Significantly improved the function of recording voice
messages. Recording, sending and canceling the recording of a voice
message are accompanied by characteristic sounds.</li>
<li>Also, when performing these functions, the focus remains in its position
and does not jump to either the record button or the message input field.</li>
<li>If the media attached to the message is opened using the spacebar, then
after closing it, the focus will return to the last element that was in
focus.</li>
<li>The add-on allows you to completely disable the announcement of progress
bars, as well as disable only the announcement of the progress bar for
playing voice messages.</li>
</ul>
<h2>Information about the opportunity to donate to the developer:</h2>
<p>If you really like this add-on and you have the desire, and most importantly
the opportunity, to financially support the developer and thereby motivate
him to further develop this add-on, you can do this by transferring a small
amount to the following bank details: <a href="https://unigramplus.diaka.ua/donate">donation link</a>, or card number is
5169360009004502(Ukraine).</p>
<p>And remember that everyone who read this line thought that someone will
definitely support the developer, but it will not be me.</p>
<h2>Hotkey list:</h2>
<ul>
<li>ALT+1: Move focus to chat list;</li>
<li>ALT+2: Move focus to the last message in an open chat;</li>
<li>ALT+3: Move focus to "unread messages" label;</li>
<li>ALT+D: Move the focus to the edit field. If the focus is already in the
edit field, then after pressing the hotkey, it will move to where it was
before;</li>
<li>ALT+T: Announce the name and status of an open chat;</li>
<li>space: Play/stop the focused voice or video message, or open a media file
attached to the current message;</li>
<li>ALT+P: Play/pause the voice message currently playing;</li>
<li>ALT+S: Increase/decrease the playback speed of voice messages;</li>
<li>ALT+E: Close audio player;</li>
<li>control+C: Copy the message if it contains text. If the focus is on a
link, the link will be copied;</li>
<li>ALT+shift+C: Call if it's a contact, or enter a voice chat if it's a
group;</li>
<li>ALT+shift+V: Press the video call button;</li>
<li>ALT+Y: Accept call;</li>
<li>ALT+N: Press the \"Decline call\" button if there is an incoming call, the
\"End call\" button if the call is in progress, or leave the voice chat if
it is active;</li>
<li>ALT+A: Press \"Mute/unmute microphone\" button;</li>
<li>ALT+C: Press "Enable/disable camera" button;</li>
<li>ALT+Q: Press \"Instant view\" button, if it is included in the current
message;</li>
<li>ALT+O: Press "More Options" button in an open chat, voice chat, or call
window;</li>
<li>ALT+M: Open navigation menu;</li>
<li>control+R: Start/stop voice message recording;</li>
<li>control+D: If pressed once, cancels the recording of a voice message. If
pressed twice, changes the notification type when starting, sending, or
canceling a voice message recording;</li>
<li>ALT+U: Toggle progress bar announcements;</li>
<li>control+P: Open current chat profile;</li>
<li>delete: Delete a message or chat;</li>
<li>shift+delete: Delete message or chat from both sides;</li>
<li>control+ALT+C: Open comments;</li>
<li>Unassigned: Reply to message;</li>
<li>ALT+F: Forward message;</li>
<li>Unassigned: Edit message;</li>
<li>ALT+shift+R: Mark a chat as read;</li>
<li>control+space: Switch to selection mode;</li>
<li>control+shift+C: Copy messages with formatting preserved;</li>
<li>ALT+shift+L: Copy data for broadcasting to the clipboard;</li>
<li>control+ALT+right arrow: Fast forward a voice message.</li>
<li>control+ALT+left arrow: Rewind voice message.</li>
<li>ALT+C: Show message text in popup window.</li>
<li>NVDA+control+U: Open UnigramPlus settings window</li>
<li>ALT+4: Move focus to list of chat folders.</li>
<li>control+shift+A: Press "Attach file" button.</li>
<li>control+N: Press "New chat" button.</li>
<li>Unassigned: Pin a message or chat.</li>
<li>ALT+5: Move focus to open profile.</li>
<li>ALT+L: Enable automatic reading of new messages in the current chat.</li>
<li>NVDA+ALT+R: Convert voice message to text.</li>
<li>Left arrow: Announce the original message, the message that was replied
to.</li>
<li>ALT+6: Move focus to the list of group threads.</li>
<li>ALT+H: Show a list of all UnigramPlus keyboard shortcuts.</li>
</ul>
<h3>Note</h3>
<ul>
<li>All hotkeys can be reassigned in NVDA menu, preferences, input gestures.</li>
<li>The fact that the function that focuses the cursor on the "unread message"
label can sometimes react with a delay is a known issue. This may depend
on the number of cash messages at the moment.</li>
</ul>
<h2>List of changes:</h2>
<h3>Version 4.9.0</h3>
<ul>
<li>Added an option to change the behavior when pressing the up arrow in an
empty message edit field. You can choose from the following options:
activate the function of editing the last sent message, move the focus to
the last message in the chat or do nothing.</li>
<li>Fixed answering and rejecting calls using hotkeys.</li>
<li>Fixed minor issues such as the ALT+H key combination not working And an
issue when the message to which the reply was written was not spoken when
pressing the left arrow.</li>
<li>Fixed display of some elements.</li>
</ul>
<h3>Version 4.8.3</h3>
<p>Fixed an issue that caused the keyboard shortcut to open the navigation menu
to not work.</p>
<h3>Version 4.8.1</h3>
<ul>
<li>UnigramPlus has been adapted to be compatible with the NVDA add-on store
format.</li>
<li>Minor fixes in the English documentation.</li>
</ul>
<h3>Version 4.8.0</h3>
<ul>
<li>Now in the Unigram settings, the settings categories can be opened by
pressing Enter. When you open any category of settings, the focus will be
placed on that category.</li>
<li>Now, when clicking the "Explanation" button in quizzes, the explanation
text will open in a separate window for convenient viewing.</li>
<li>Fixed an issue where chat folder names were not spoken when switching
between them.</li>
<li>Fixed a bug that made it impossible to disable or change the order of
speaking the chat type and name.</li>
<li>Fixed the issue when it was not possible to find out the correct answer in
quizzes.</li>
<li>Fixed the problem with copying a message using the control+shift+C
combination.</li>
<li>Made several minor fixes, improvements, and code optimizations.</li>
</ul>
<h3>Version 4.7.0</h3>
<ul>
<li>UnigramPlus is now adapted to the latest version of Unigram.</li>
<li>Compatibility with NVDA-2023 is now ensured.</li>
<li>The keyboard shortcut ALT+1 now moves focus not only to the chat list, but
also to the contact list and settings section list.</li>
<li>The automatic announcement of new messages in chat, as well as the
announcement of chat actions, have been significantly redesigned,
resulting in improved stability.</li>
<li>A keyboard shortcut has been added to display all UnigramPlus commands. By
default, this function is assigned to ALT+H.</li>
<li>Several minor issues have also been fixed.</li>
</ul>
<h3>Version 4.6.0</h3>
<ul>
<li>Added a keyboard shortcut to move focus to list of group threads. By
default, this function is assigned to the ALT+6 combination. Please note
that often when pressing the enter key on the group that we want to open,
the list of threads may not be displayed and then it is necessary to set
the focus on this group again and press the enter key. As a rule, after
the second press, a list of threads is displayed, and after that we can
press a key combination that will move the focus to this list.</li>
<li>Now the ALT+2 combination moves the focus not only to the list with
messages, but also to the open profile, to the open list of group threads,
or to the open section with settings.</li>
<li>Now in the UnigramPlus settings, you can disable the pronunciation of the
phrases "Admin" and "Owner" on messages in groups.</li>
<li>Hotkeys for accepting and declining calls now work correctly.</li>
<li>Now the automatic announcement feature for new messages and the chat
activity will not turn off when NVDA is restarted, but will work until you
turn it off yourself.</li>
<li>Improved display of some interface elements.</li>
</ul>
<h3>Version 4.5.0</h3>
<ul>
<li>Adapted to the latest version of Unigram</li>
<li>Now if a message was sent in response to another message, by pressing the
left arrow key, you can hear the text of the message in response to which
it was sent</li>
<li>Added French localization</li>
<li>Removed the ability to add reactions to messages with keyboard shortcuts,
since I was unable to adapt this function to changes in the Unigram
interface</li>
<li>Fixed some minor bugs</li>
</ul>
<h3>Version 4.4.0</h3>
<ul>
<li>The function of announcing activity in chats has been added. By default,
this function is activated by double-pressing the ALT+T combination. The
function remains active only until NVDA is restarted.</li>
<li>The function of automatic announcements of new messages in the chat has
been added. By default, this function is activated by pressing ALT+L. The
feature remains active only until NVDA is restarted. There may be
stability issues if too many new messages quicly appear in the chat.</li>
<li>Added a keyboard shortcut for the function of converting voice messages to
text. By default, this function is assigned to the NVDA+ALT+R
combination. Please note that in cases where the voice message is very
long, then the conversion to text takes place in parts. That is, it may
happen that when Unigramplus notifies you that the conversion is complete,
only part of the voice message will actually be converted. And after a few
seconds, this text will be added.</li>
<li>Now, when navigating through the chat list, UnigramPlus reports
information about premium accounts and verified accounts.</li>
</ul>
<h3>Version 4.3.0</h3>
<ul>
<li>Now UnigramPlus works correctly when several chats are open in different
windows.</li>
<li>Added keyboard shortcut to move focus to user profile area if it is
open. The default gesture is alt+5.</li>
<li>Fixed minor bugs.</li>
</ul>
<h3>Version 4.4.0</h3>
<ul>
<li>The mechanism for saving UnigramPlus settings has been significantly
redesigned. Now the settings will not be stored in the NVDA config file,
but will be stored in its own config file. This should solve the problem
when users after an update or just suddenly UnigramPlus stopped working,
due to problems accessing the NVDA config file. Unfortunately, users will
have to re-configure UnigramPlus for themselves, as after installing this
update, all settings will be reset.</li>
<li>Fixed UnigramPlus compatibility issue with BluetoothAudio add-on.</li>
<li>Now the information that the message is not selected will not be
reported. If a message is selected, information about it will be announced
before the message content.</li>
<li>Now the order number of the elements in the chat will be announced if you
have enabled the element position in the NVDA settings.</li>
<li>Added labels to some buttons.</li>
</ul>
<h3>Version 4.1.0</h3>
<ul>
<li>Added a gesture to pin a message or chat. By default, no keyboard shortcut
are assigned to this feature.</li>
<li>Added a keyboard shortcut for pressing the "New conversation" button. The
default gesture for this feature is ctrl+n.</li>
<li>Added a keyboard shortcut for pressing the "Attach media" button. The
default gesture is ctrl+shift+a.</li>
<li>Added a keyboard shortcut to go to the list of chat folders. The default
gesture is alt+4. This feature will be useful for those who use more than
nine chat folders.</li>
<li>Now, when switching between folders using the arrows, the focus will not
jump anywhere.</li>
<li>Now, when switching between folders using hotkeys, in addition to the name
of the active folder, the number of unread chats in this folder will be
announced.</li>
<li>Now features such as "Mark a chat as read" and "Pin a message or chat"
will also work in reverse.</li>
<li>Added Romanian localization.</li>
</ul>
<h3>Version 4.0.0</h3>
<ul>
<li>Provided compatibility with Unigram 8.8. Since the Unigram interface has
changed, I had to rewrite a significant part of the addon code.</li>
<li>Added the ability to rewind and fast forward voice messages. To fast
forward, use the combination control+right arrow, and to rewind, use
control+left arrow.</li>
<li>Now UnigramPlus will report not only the presence of reactions in
messages, but also announce detailed information about reactions.</li>
<li>Added the ability to view the text of the message in the popup window. The
default gesture for this feature is ALT+C.</li>
<li>Added keyboard shortcut to open UnigramPlus settings window. The default
gesture for this feature is NVDA+control+U</li>
<li>Added Czech and Romanian localizations.</li>
<li>Fixed issue with UnigramPlus update for Ukrainian residents.</li>
</ul>
<h3>Version 3.2.3</h3>
<ul>
<li>Added Chinese localization.</li>
<li>Updated existing localizations, including English.</li>
<li>Fixed minor bugs.</li>
</ul>
<h3>Version 3.2.0</h3>
<ul>
<li>Removed features such as "Chat activity tracking" and "Read new messages
in open chat" because I was unable to get them to work properly in NVDA
2022.1.</li>
<li>Improved accessibility of mute / unmute and turn on / off camera in
calls. Now, after pressing the shortcut for both functions, their status
will be announced.</li>
<li>Fixed an issue where the Enter key was not working properly on some
elements. Now you can still record voice messages by holding the Enter key
on the record button.</li>
<li>You can now reassign keyboard shortcuts to features such as "Reply to
message" and "Edit message". You can also assign these functions to keys
such as Enter, Backspace or even left or right arrows, and it won't
interfere with those keys on other items. Note that no keys will be
assigned to these features at first, but you will only be able to assign
them when the focus is on one of the chat messages.</li>
<li>Now the function "Say the sender's name" should work more correctly.</li>
<li>When you focus on a link contained in a message, the message text will not
be spoken first, but the link text will be spoken immediately.</li>
<li>made many small improvements and fixed many bugs and shortcomings.</li>
<li>Now UnigramPlus should run noticeably faster.</li>
</ul>
<h3>Version 3.1.0</h3>
<ul>
<li>Poll announcement has been improved. The names of users who have taken
surveys are now announced in the results window. Polls will also provide
information on which option was correct.</li>
<li>The ability to react to messages has been added, but only in private
chats. This feature will not work properly in groups and channels. In
private chats, by pressing NVD + ALT + numbers from 1 to 5, you can type
the following reactions: 1 - 👍, 2 - 👎, 3 - ❤, 4 - 🔥, 5 - 🥰.</li>
<li>Added the ability to announce information about existing replies to
messages. Unfortunately, it is not yet possible to announce the name of
the available reactions.</li>
<li>Added hotkey to quickly copy data needed for broadcasts.</li>
<li>Fixed an issue with displaying inline results that appeared in the latest
versions of Unigram.</li>
</ul>
<h3>Version 3.0.0</h3>
<p>Warning! UnigramPlus will now support NVDA versions no older than 21.2.0. *
Added labels for many UI elements. * Fixed some bugs.</p>
<h3>Version 2.9.0</h3>
<ul>
<li>Now the edit field will change its label depending on whether we are
replying to the message or editing it.</li>
<li>Added the ability to enable a confirmation dialog for deleting messages or
chats using hotkeys in the settings.</li>
<li>Added Serbian localization.</li>
<li>Fixed small issues.</li>
</ul>
<h3>Version 2.8.0</h3>
<ul>
<li>Added the ability to update the add-on from within the add-on. Now, in
order to check for updates and install them, just open the UnigramPlus
settings and click the appropriate button. You can also enable automatic
check for updates on NVDA startup.</li>
<li>Added Arabic localization.</li>
</ul>
<h3>Version 2.7.0</h3>
<ul>
<li>You will now be notified that the message has been forwarded.</li>
<li>Improved message copy function. Now, if the text contains a clickable link
and the focus is on that link, pressing CTRL+C will copy the link instead
of the entire text.</li>
<li>Added hotkey for copying messages while maintaining text formatting. This
function emulates the activation of the corresponding item in the
application menu. The default hotkey for this feature is
CTRL+shift+C. Because of this feature, the hotkey for opening comments has
been changed to CTRL+ALT+C.</li>
<li>Added the ability to automatically announce new messages in open chat. By
default, it can be enabled by pressing ALT + L.</li>
<li>Added hotkeys for quick viewing of chat messages. Press NVDA + CTRL + the
number corresponding to the number of a particular message in reverse
order, that is, if you want to view the last message, press 1, if you want
to view the previous message, press 2, etc.</li>
<li>Now pressing ALT+T will give you information about the active voice chat
in the current group.</li>
</ul>
<h3>Version 2.6.0</h3>
<ul>
<li>Provided compatibility with NVDA 21.3.</li>
<li>Added hotkey to enable selecting messages or chats.</li>
<li>Added hotkey for forwarding messages.</li>
<li>Added hotkey for marking a chat as read.</li>
<li>Improved performance of the existing features.</li>
</ul>
<h3>Version 2.5.0</h3>
<ul>
<li>There is now a checkbox that, if checked, fixes the voice message
recording issue that some users are experiencing.</li>
<li>Added a hotkey for replying to a message. You can do it by pressing Enter
on the message or you can reassign the alternative hotkeys for this
feature to something else.</li>
<li>Added hotkey for editing messages. The default keyboard shortcut is
ALT+Backspace.</li>
</ul>
<h3>Version 2.4.0</h3>
<ul>
<li>You will now hear the sender's name when focusing on a message.</li>
<li>When focusing on a group chat that contains unread messages, you will be
notified if there are replies for you in that group.</li>
<li>The performance of features added in the previous update has also been
improved.</li>
</ul>
<h3>Version 2.3.0</h3>
<ul>
<li>Improved accessibility of messages containing multiple media
attachments. Previously, the caption of a message containing more than one
media attachment could only be accessed using object navigation. Now this
caption will be read immediately after focusing on such a message.</li>
<li>Improved accessibility of messages containing polls. Now when you focus on
such a message, you will hear the number of people who have already voted,
as well as all the answer options with the result for each option.</li>
<li>Improved accessibility of messages containing URLs. Now, if the URL has a
description, it will also be read, i.e., for example, if the message has a
URL for YouTube, the title and description for that video will be read
right after the URL itself. Also, if the URL is longer than 30 characters,
it will be shortened to make the following description easier to read.</li>
<li>Improved accessibility of the inline query results panel.. To navigate
through the results of inline queries, use the following combinations:
control+up and control+down.</li>
<li>Added hotkey to open comments.</li>
</ul>
<h3>Version 2.2.0</h3>
<ul>
<li>Added hotkey to delete messages or chats just for you and also on both
sides. This function is related to the Unigram interface language, so it
may not work in some localizations. In the settings you can choose the
type of notifications, text or sound.</li>
<li>Added the ability to specify which interface language you use in Unigram
in settings. This is necessary for the correct operation of functions
associated with certain localizations.</li>
<li>Added hotkey to open current chat profile.</li>
<li>Now, after closing a chat, the focus will move to the list of chats, and
not to the button "Open navigation menu".</li>
</ul>
<h3>Version 2.1.0</h3>
<ul>
<li>When switching between folders in the chat list, the name of the current
folder will be announced.</li>
<li>In the chat list, you hear the name of the chat, followed by its type.</li>
<li>Improved the function of moving focus to the list of chats. Now it should
work more accurately and without delays.</li>
<li>Now the add-on settings have become even more flexible, because a section
with some UnigramPlus options has appeared in the NVDA Preferences menu.</li>
<li>Added Polish localization.</li>
<li>Many small fixes and improvements.</li>
</ul>
<h3>Version 2.0.0</h3>
<ul>
<li>The feature where the word "Seen" is not announced and the word "Not seen"
is spoken before the message content is read now works in Spanish,
Portuguese, Croatian, Turkish and Persian localizations.</li>
<li>Improved the function of progress bar announcements. Now, when this mode
is enabled, not all progress indicators are announced, but only those that
are in focus.</li>
<li>If you press the spacebar in a message that contains a file that has not
completed downloading, you will be notified that the download has been
paused.</li>
<li>Added Portuguese localization.</li>
<li>Fixed some small issues and improved performance.</li>
</ul>
<h3>Version 1.9.0</h3>
<ul>
<li>A hotkey has been added that toggles the level of progress bar
announcement between values such as: "Announce all progress bars",
"Announce some progress bars", "Announce all progress bars except the
voice message playback progress bar" and "Do not announce any progress
bars".</li>
<li>For those users who have automatic media downloads disabled in Unigram,
the progress bar announcement level can be set to "Announce all progress
bars except the voice message playback progress bar", and for those who
have it enabled, it is better to set it to "Do not announce progress
bars".</li>
<li>Added Spanish, Croatian and Persian localizations.</li>
<li>Fixed minor bugs from previous versions.</li>
</ul>
<h3>Version 1.8.0</h3>
<ul>
<li>The name and size of the file will be spoken when the cursor is focused on
the "Open File" button or the "Download File" button, and when the cursor
is focused on the play button of the audio file, you will hear its name
and duration.</li>
<li>Added hotkey to move focus to edit field. If the focus is already in the
edit field, then after pressing the hot key, it will move to where it was
before.</li>
<li>The chat activity tracking feature is now enabled by double pressing ALT +
T. You can simply turn it on or turn it on temporarily until the next time
you close the application.</li>
<li>Added the ability to select the type of notification for recording voice
messages. This is done by double pressing the control+d hotkey. There you
can choose between sound, text notification, or return to the standard
voice message recording behavior.</li>
</ul>
<h3>Version 1.7.0</h3>
<ul>
<li>Significantly improved the function of recording voice
messages. Recording, sending and canceling the recording of a voice
message are accompanied by characteristic sounds.</li>
<li>Also, when performing these functions, the focus remains in its position
and does not jump to either the record button or the message input field.</li>
</ul>
<h3>Version 1.7.0</h3>
<ul>
<li>Added the ability to track chat activity. This option can be enabled by
pressing ALT+shift+T and remains active until Unigram is closed or NVDA is
next restarted.</li>
<li>The hotkey that activates the "More Options" button now works in the voice
chat window and the call window.</li>
</ul>
<h3>Version 1.6.0</h3>
<ul>
<li>If the media attached to the message is opened using the spacebar, after
closing it, the focus will return to the last element that was in focus.</li>
<li>Now you can return to the active voice chat not only from the current
group, but also from any other chat.</li>
<li>Pressing ALT+shift+C in an open chat will return you to the voice chat
instead of calling the contact.</li>
<li>If a message has not been sent, you will be notified as soon as that
message has been focused.</li>
<li>If the focused message contains a link, you'll only hear the text of the
link itself, not the entire message.</li>
<li>Fixed an issue where status changes for buttons such as Mute/Unmute Mic
and Enable/Disable Camera were not reported in private calls and voice
chats.</li>
<li>Now the message copy function allows you to copy the contents of items in
the message quick view window.</li>
</ul>
<h3>Version 1.5.1</h3>
<p>This update fixes a huge number of bugs and improves the performance of the
add-on.</p>
<h3>Version 1.5.0</h3>
<ul>
<li>This update adds a hotkey that clicks the "Instant View" button in a
message if included in the message.</li>
<li>By default, this feature is activated with the ALT+Q hotkey.</li>
<li>After opening such an article, the focus will automatically go to the
first element of this article, and after closing, the focus will return to
the last viewed message.</li>
<li>We also fixed an issue where not all article elements in the Instant View
window were readable, even if they contained text content.</li>
</ul>
<h3>Version 1.1.7</h3>
<p>Added Turkish localization.</p>
Thunderbird+http://addons.nvda-project.org/addons/thunderbirdPlus.sk.html2023-08-08T16:02:08Z2023-05-10T20:38:33Z
<ul>
<li>Authors: Pierre-Louis Renaud (From Thunderbird 78 to 102) & Cyrille Bougot
(TB 102), Daniel Poiraud (From TB 78 to 91), Yannick (TB 45 to 60);</li>
<li>URL: <a href="https://www.rptools.org/NVDA-Thunderbird/get.php?pg=manual&lang=en">User manual</a> ; <a href="https://www.rptools.org/NVDA-Thunderbird/get.php?pg=changes&lang=en">History of changes at RPTools.org</a> ; <a href="https://www.rptools.org/NVDA-Thunderbird/toContact.html">Contact
in French or English</a> ;</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=thunderbirdPlus">stable version</a></li>
<li>Download <a href="https://www.rptools.org/?p=8610">Latest version from RPTools.org</a> ;</li>
<li>NVDA compatibility: 2019.3 and later;</li>
<li>Thunderbird compatibility: versions 102.x;</li>
<li><a href="https://github.com/RPTools-org/ThunderbirdPlus/">Source code on gitHub</a></li>
</ul>
<h2>Description</h2>
<p>This add-on greatly improves the Mozilla Thunderbird messaging client's
comfort and efficient use with NVDA.</p>
<p>Improvements relate to the following aspects:</p>
<h3>Auditory Comfort</h3>
<ul>
<li>Alerts such as "so-and-so requested a return receipt" can be deactivated
via an option;</li>
<li>The alerts "This is a draft" and "Thunderbird thinks this message is
fraudulent" are simply dismissed in silence;</li>
<li>Options allow you to disable mailing list names announcement, remove or
group "RE" mentions and clean up the names of correspondents by removing
numbers and other annoying special characters;</li>
</ul>
<h3>Navigating The Main Window</h3>
<ul>
<li>Moving to the next panel is done using the TAB key, while the Escape key
returns to the previous panel. This is more comfortable than through F6
and Shift+F6.</li>
<li>The selection of tabs with Control+Tab and Control+number is spoken as in
this example: Tab 1 of 4, inbox;</li>
<li>A keyboard shortcut allows you to list tabs in a menu in order to easily
activate one of them;</li>
<li>A keyboard shortcut is used to display the context menu of the tabs bar;</li>
</ul>
<h3>The Folder Tree view</h3>
<ul>
<li>Alt+Down Arrow and Alt+Up Arrow let you navigate among folders containing
unread messages;</li>
<li>Typing a letter or number selects the next folder whose name begins with
that character. With the Shift key, the move occurs from bottom to
top. Besides, the name of the account to which the folder belongs is
announced;</li>
<li>Pressing Space bar on a folder containing unread messages selects the
first unread message of the message list;</li>
<li>Two dialogs for accounts and their associated folders allow you to filter
them by keyword or display only folders with unread messages;</li>
</ul>
<h3>The Message List</h3>
<ul>
<li>Choosing columns and their layout within the message list is made
accessible through a simple dialog;</li>
<li>Viewing the columns of the message list: shortcuts allow you to easily
listen to, spell or copy the sender's name, the message subject or its
date by typing a digit on the alphanumeric keypad. For instance, a single
press on 1 or & announces the sender, two presses spell the name and three
presses copy it to the clipboard;</li>
<li>Viewing the headers in the header pane displayed using F8: with Alt+ a
digit, 1 press announces any header containing the sender's addresses or
recipients, 2 presses open a dialog to copy them, 3 presses open the
native Thunderbird context menu associated with the header;</li>
<li>Cleaned quick message text preview via space key, Alt+down arrow or F4:
Large header blocks in message quotes are replaced by the phrase "Sender
name wrote". NVDA will also announce "clickable link" instead of the long
address of the link.</li>
<li>Quick overview of quotes in chronological order, from bottom to top, via
Shift+Space, Alt+up arrow or Shift+F4;</li>
<li>Easy access to attachments using the shortcut Alt+page down or via number
1 of alphanumeric keypad;</li>
</ul>
<h3>Quick Filter Bar And Priority Tag Management</h3>
<ul>
<li>It is possible to navigate filtering options with the vertical arrows. The
Enter key is used to check or uncheck a filter;</li>
<li>Adding or removing tags is done by simply pressing Shift+ a digit on the
alphanumeric keyboard. For example, press Shift+4 to add the "To Do" tag
to a message. You can then filter the message list by tag via the quick
filter bar which is hence accessible;</li>
</ul>
<h3>The Message Write Window</h3>
<p>Alt+1 announces the Sender, Alt+2 announces the Recipient, Alt+3 announces
the Attachments, etc. Two presses place the focus on one of these fields;</p>
<h3>Spell-check Dialog</h3>
<ul>
<li>The misspelled word is announced with or without spelling before the
suggested word. The shortcuts NVDA+Tab or Alt+up arrow announce misspelled
and replacement words: 1 press spells the words at normal speed, 2 presses
spell them quickly, 3 presses copy the misspelled word to the clipboard
for analysis in another edit field;</li>
<li>Various combinations involving the Enter key trigger the Replace, Replace
All, Ignore, Ignore All, or Add Word to Dictionary buttons have been added
for even more convenience within this dialog;</li>
</ul>
<h3>Automatic Update</h3>
<p>ThunderbirdPlus contains an independent auto-update system with
deactivation/reactivation and postponement features;</p>
<h3>Side-to-side Operation with Chichi</h3>
<p>ThunderbirdPlus is designed to work seamlessly with Chichi, an add-on that
installs directly onto Thunderbird.</p>
<p>Read about this on the <a href="https://www.rptools.org/NVDA-Thunderbird/get.php?pg=chichi&lang=en">page of Chichi</a> ;</p>
<p>And many other things that you will discover by reading the <a href="https://www.rptools.org/NVDA-Thunderbird/get.php?pg=manual&lang=en">user manual</a>
;</p>
URL Shortenerhttp://addons.nvda-project.org/addons/urlShortener.sk.html2024-03-10T18:40:21Z2023-04-16T09:27:21Z
<ul>
<li>Author: Noelia Ruiz Martínez</li>
</ul>
<p>This add-on is used to shorten URLs from NVDA through <a href="https://is.gd">is.gd</a>.</p>
<h2>Shorten URL dialog</h2>
<p>Go to NVDA's menu, Tools submenu, and activate the Shorten URL item.</p>
<p>Alternatively, you can assign a gesture from the Input gestures dialog of
NVDA.</p>
<p>The Shorten URL dialog includes the following controls:</p>
<ul>
<li>A list to select one of the saved URLs. From this list, Press shift+tab to
search, and tab to press one of the following buttons.</li>
<li>Copy shortened URL. This can also be activated by pressing Enter from the
URLs list.</li>
<li>A readonly box showing details about the selected URL.</li>
<li>Set of controls to shorten a new URL: Provide the new URL; optionally, you
can set a display name and a custom subfix for the shortened URL. Finally,
press the Shorten URL button.</li>
<li>Rename: opens a dialog to provide a new name to display the selected URL
on the list.</li>
<li>Delete: opens a dialog to delete the selected URL.</li>
<li>Remove saved URLs: opens a dialog to remove the saved URLs from the
configuration folder.</li>
<li>Close.</li>
</ul>
<h2>Changes for 8.0.0</h2>
<ul>
<li>Added a readonly box with details about the selected URL.</li>
</ul>
<h2>Changes for 5.0.0</h2>
<ul>
<li>The new URL dialog has been replaced with a set of controls in the main
dialog, so that the focus can be placed in the relevant field to fix
possible errors.</li>
</ul>
<h2>Changes for 2.0.0</h2>
<ul>
<li>The Shorten URL option won't appear multiple times in Tools submenu when
reloading plugins.</li>
<li>The New URL dialog includes an edit box to provide a custom subfix for the
shortened URL.</li>
</ul>
<h2>Changes for 1.0.0</h2>
<ul>
<li>Initial version.</li>
</ul>
TeleNVDAhttp://addons.nvda-project.org/addons/TeleNVDA.sk.html2024-02-13T14:37:04Z2023-03-28T10:35:29Z
<ul>
<li>Authors: Asociación Comunidad Hispanohablante de NVDA and other
contributors. Original work by Tyler Spivey and Christopher Toth</li>
<li>NVDA Compatibility: 2019.3 and beyond</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=TeleNVDA">stable version</a></li>
</ul>
<p>Note: in order to make download easier for users who need assistance or
training and have limited computing skills, we provide an alternate link to
the latest stable version which is easy to remember and share. You can go to
<a href="https://nvda.es/tele">nvda.es/tele</a> and download the add-on directly,
without intermediate web pages.</p>
<p>Welcome to the TeleNVDA addon, which will allow you to connect to another
computer running the free NVDA screen reader. With this add-on, you can
connect to another person's computer, or allow a trusted person to connect
to your system to perform routine maintenance, diagnose a problem, or
provide training. This add-on is a modified version of the <a href="https://nvdaremote.com">NVDA Remote
add-on</a>, and is maintained by the NVDA spanish
community. It's fully compatible with NVDA Remote. These are the current
differences:</p>
<ul>
<li>An option allows blocking remote speech commands different from text.</li>
<li>An option to mute remote speech when controlling the local machine and
unmute it when controlling the remote machine.</li>
<li>Improved support for proxy servers and TOR hidden services (<a href="https://addons.nvda-project.org/addons/proxy.en.html">Proxy support
add-on</a> is
required).</li>
<li>Ability to change the f11 key to another gesture. Now this works as a
common script so, you can assign gestures in the "Input Gestures" dialog.</li>
<li>a gesture (unassigned by default) to open the addon options</li>
<li>Ability to assign a gesture to the send ctrl+alt+delete option in the
input Gestures dialog. Warning! you shouldn't assighn the ctrl+alt+delete
keys to this option. Doing it will stil work normally, but anytime you
press ctrl+alt+delete keys to send the ctrl+alt+delete to the remote
machine, your own machine will also be affected by the ctrl+alt+delete
function, which is likely not what you expect!</li>
<li>Ability to ignore the next immediate gesture completely, it is useful if
you need to send to the remote machine the gesture used to toggle between
host and remote machine.</li>
<li>Ability to exchange small files (up to 10 MB) among users connected to the
same session.</li>
<li>Ability to forward ports via UPNP.</li>
<li>Ability to use a custom portcheck service.</li>
<li>Some GUI tweaks.</li>
<li>Several bug fixes.</li>
</ul>
<h2>Before You Begin</h2>
<p>You will need to have installed NVDA on both computers, and obtain the
TeleNVDA addon.</p>
<p>The installation of both NVDA and the TeleNVDA addon are standard. If you
need more information, this can be found in NVDA's User Guide.</p>
<h2>Updating</h2>
<p>When updating the addon, if you have installed TeleNVDA on the secure
desktop, it is recommended that you also update the copy on the secure
desktop.</p>
<p>To do this, first update your existing addon. Then open the NVDA menu,
preferences, General settings, and press the button labeled "Use currently
saved settings on the logon and other secure screens (requires administrator
privileges)".</p>
<h2>Starting a remote session through a relay server</h2>
<h3>On the computer to be controlled</h3>
<ol>
<li>Open the NVDA menu, Tools, Remote, Connect. Or directly press
NVDA+alt+page up. This gesture can be modified from the NVDA input
gestures dialog.</li>
<li>Choose client in the first radio button.</li>
<li>Select Allow this machine to be controlled in the second set of radio
buttons.</li>
<li>In the host field, enter the host of the server you are connecting to,
for example remote.nvda.es. When the particular server uses an
alternative port, you can enter the host in the form
<host>:<port>, for example remote.nvda.es:1234. If you are
connecting to an IPV6 address, enter it between square brackets, for
example [2603:1020:800:2::32].</li>
<li>Enter a key into the key field, or press the generate key button. The key
is what others will use to control your computer. The machine being
controlled and all its clients need to use the same key.</li>
<li>Press ok. Once done, you will hear a tone and connected. If the server
includes a message of the day, it will be displayed in a dialog box. You
will see this dialog everytime you connect or only the first time,
depending on the server configuration.</li>
</ol>
<h3>On the machine that is to be the controlling computer</h3>
<ol>
<li>Open the NVDA menu, Tools, Remote, Connect. Or directly press
NVDA+alt+page up. This gesture can be modified from the NVDA input
gestures dialog.</li>
<li>Choose client in the first radio button.</li>
<li>Select Control another machine in the second set of radio buttons.</li>
<li>In the host field, enter the host of the server you are connecting to,
for example remote.nvda.es. When the particular server uses an
alternative port, you can enter the host in the form
<host>:<port>, for example remote.nvda.es:1234. If you are
connecting to an IPV6 address, enter it between square brackets, for
example [2603:1020:800:2::32].</li>
<li>Enter a key into the key field, or press the generate key button. The
machine being controlled and all its clients need to use the same key.</li>
<li>Press ok. Once done, you will hear a tone and connected. If the server
includes a message of the day, it will be displayed in a dialog box. You
will see this dialog everytime you connect or only the first time,
depending on the server configuration.</li>
</ol>
<h3>Connection security warning</h3>
<p>If you connect to a server without a valid SSL certificate, you will receive
a connection security warning.</p>
<p>This may mean that your connection is insecure. If you trust this server
fingerprint, you can press "Connect" to connect once, or "Connect and do not
ask again for this server" to connect and save the fingerprint.</p>
<h2>Direct connections</h2>
<p>The server option in the connect dialog allows you to set up a direct
connection.</p>
<p>Once selecting this, select which mode your end of the connection will be
in.</p>
<p>The other person will connect to you using the opposite.</p>
<p>Once the mode is selected, you can use the Get External IP button to get
your external IP address and make sure the port which is entered in the port
field is forwarded correctly. If enabled on your router, you can forward the
port using UPNP before performing portcheck.</p>
<p>If portcheck detects that your port (6837 by default) is not reachable, a
warning will appear.</p>
<p>Forward your port and try again. Also, ensure that the NVDA process is
allowed through Windows firewall.</p>
<p>Note: The process for forwarding ports, enabling UPNP or configuring Windows
firewall is outside of the scope of this document. Please consult the
information provided with your router for further instruction.</p>
<p>Enter a key into the key field, or press generate. The other person will
need your external IP along with the key to connect. If you entered a port
other than the default (6837) in the port field, make sure that the other
person appends the alternative port to the host address in the form
<external ip>:<port>.</p>
<p>If you want to forward the chosen port using UPNP, enable the "Use UPNP to
forward this port if possible" checkbox.</p>
<p>Once ok is pressed, you will be connected. When the other person connects,
you can use TeleNVDA normally.</p>
<h2>Controlling the remote machine</h2>
<p>Once the session is connected, the user of the controlling machine can press
f11 to start controlling the remote machine (e.g. by sending keyboard keys
or braille input). This gesture can be changed from NVDA Input Gestures
Dialog.</p>
<p>When NVDA says controlling remote machine, the keyboard and braille display
keys you press will go to the remote machine. Furthermore, when the
controlling machine is using a braille display, information from the remote
machine will be displayed on it. Press f11 again to stop sending keys and
switch back to the controlling machine.</p>
<p>For best compatibility, please ensure that the keyboard layouts on both
machines match.</p>
<h2>Sharing your session</h2>
<p>To share a link so someone else can easily join your TeleNVDA session,
select Copy Link from the Remote menu. You can also assign gestures from the
NVDA Input Gestures dialog to speed up this task.</p>
<p>You can choose between two link formats. First one is compatible with both
NVDA Remote and TeleNVDA, and is the most recommended for now. Second one is
compatible only with TeleNVDA.</p>
<p>IF you are connected as the controlling computer, this link will allow
someone else to connect and be controlled.</p>
<p>If instead you have set up your computer to be controlled, the link will
allow people who you share it with to control your machine.</p>
<p>Many applications will allow users to activate this link automatically, but
if it does not run from within a specific app, it can be coppied to the
clipboard and run from the run dialog.</p>
<p>Note that the shared link may not work if you copy it from a server running
in direct connection mode.</p>
<h2>Send Ctrl+Alt+Del</h2>
<p>While sending keys, it is not possible to send the CTRL+Alt+del combination
normally.</p>
<p>If you need to send CTRL+Alt+del, and the remote system is on the secure
desktop, use this command. You can also assighn a gesture for this command
in the input Gestures dialog.</p>
<h2>Send toggle key between local and remote computer</h2>
<p>Usually when you press the assigned gesture to switch between the local and
the remote machine, it won't be sent to the remote machine; it will switch
between the local machine and the remote machine instead.</p>
<p>If you need to send this or any gesture to the remote machine, you can
override this behavior for the next immediate gesture by activating the
ignore next gesture script.</p>
<p>By default, this script is assigned to the control + f11 key. This gesture
can be changed from NVDA Input Gestures Dialog.</p>
<p>When this script is called, the next gesture will be ignored and will be
sent to the remote machine, including the gesture to activate the ignore
next gesture script. Once the next gesture has been sent, it will return to
the usual behavior.</p>
<h2>Remotely Controlling an Unattended Computer</h2>
<p>Sometimes, you may wish to control one of your own computers remotely. This
is especially helpful if you are traveling, and you wish to control your
home PC from your laptop. Or, you may want to control a computer in one room
of your house while sitting outside with another PC. A little advanced
preparation makes this convenient and possible.</p>
<ol>
<li>Enter the NVDA menu, and choose Tools, then Remote. Finally, press Enter
on Options.</li>
<li>Check the box that says, "Auto connect to control server on startup".</li>
<li>Select whether to use a remote relay server or to locally host the
connection. If you decide to host the connection, you can try to forward
ports using UPNP by checking the provided checkbox.</li>
<li>Select Allow this machine to be controlled in the second set of radio
buttons.</li>
<li>If you host the connection yourself, you will need to ensure that the
port entered in the port field (6837 by default) on the controlled
machine can be accessed from the controlling machines.</li>
<li>If you wish to use a relay server, Fill in both the Host and Key fields,
tab to OK, and press Enter. The Generate Key option is not available in
this situation. It is best to come up with a key you will remember so you
can easily use it from any remote location.</li>
</ol>
<p>For advanced use, you can also configure NVDA Remote to automatically
connect to a local or remote relay server in controlling mode. If you want
this, select Control another machine in the second set of radio buttons.</p>
<p>Note: The autoconnect at startup-related options in the options dialog do
not apply until NVDA is restarted.</p>
<h2>Muting Speech on the Remote Computer</h2>
<p>If you do not wish to hear the remote computer's speech or NVDA specific
sounds, simply access the NVDA menu, Tools, and Remote. Arrow down to Mute
Remote, and press Enter. You can assign a gesture to this option from the
NVDA Input Gestures dialog. Please note that this option will not disable
remote braille output to the controlling display when the controlling
machine is sending keys.</p>
<p>You can mute permanently the remote speech while you work on your local
machine by enable that setting from the TeleNVDA category on the NVDA
settings dialog.</p>
<h2>Ending a remote Session</h2>
<p>To end a remote session, do the following:</p>
<ol>
<li>On the controlling computer, press F11 to stop controlling the remote
machine. You should hear or read the message: "Controlling local
machine." If you instead hear or read a message that you are controlling
the remote machine, press F11 once more.</li>
<li>Access the NVDA menu, then Tools, Remote, and press Enter on Disconnect.</li>
</ol>
<p>Alternatively, you can press NVDA+alt+page down to directly disconnect the
session. This gesture can be changed from NVDA Input Gestures Dialog. To
keep the other end safe, you may press this gesture while sending keys to
disconnect the remote computer.</p>
<h2>Push clipboard</h2>
<p>The Push clipboard option in the remote menu allows you to push text from
your clipboard.</p>
<p>When activated, any text on the clipboard will be pushed to the other
machines.</p>
<h2>Sending files</h2>
<p>The Send file option in the remote menu allows you to send small files to
all session members, including the controlled machine. Please note, you can
only send files smaller than 10 MB. Sending or receiving files on secure
screens is not allowed.</p>
<p>Also note that sending files may consume too much network traffic on the
server, depending on the file size, the computers connected to the same
session and the amount of files sent. Contact your server administrator and
ask them if the traffic is billed. In that case, consider using another
platform to exchange files.</p>
<p>When the file is received on the remote machines, a Save as dialog will pop
up, allowing you to choose where to save the file.</p>
<h2>Configuring TeleNVDA to Work on a Secure Desktop</h2>
<p>In order for TeleNVDA to work on the secure desktop, the addon must be
installed in the NVDA running on the secure desktop.</p>
<ol>
<li>From the NVDA menu, select Preferences, then General Settings.</li>
<li>Tab to the Use Currently Saved Settings on the Logon and Other Secure
Screens (requires administrator privileges) button, and press Enter.</li>
<li>Answer Yes to the prompts regarding copying your settings and about
copying plugins, and respond to the User Account Control prompt that may
appear.</li>
<li>When settings are copied, press Enter to dismiss the OK button. Tab to OK
and Enter once more to exit the dialog.</li>
</ol>
<p>Once TeleNVDA is installed on the secure desktop, if you are currently being
controlled in a remote session, you will have speech and braille access to
the secure desktop when switched to.</p>
<h2>Clearing SSL certificate fingerprints</h2>
<p>If you no longer want to trust the server fingerprints you've trusted, you
can clear all of the trusted fingerprints by pressing the "Delete all
trusted fingerprints" button in the Options dialog.</p>
<h2>Using a custom portcheck service</h2>
<p>By default, TeleNVDA checks open ports using a service provided by the NVDA
spanish community. You can change the service URL from the options
dialog. Ensure that the port to check is part of the custom URL and the
results are returned in the expected format. A portcheck sample script is
distributed in TeleNVDA repository, so you can host your own copy if
desired.</p>
<h2>Altering TeleNVDA</h2>
<p>This project is covered by the GNU General Public License, version 2 or
later. You may clone <a href="https://github.com/nvda-es/TeleNVDA">this repo</a> to make alteration to TeleNVDA, provided
that you read, understand and respect the license terms. The MiniUPNP module
is licensed under a BSD-3 clause license.</p>
<h3>3rd Party dependencies</h3>
<p>These can be installed with pip:</p>
<ul>
<li>Markdown</li>
<li>scons</li>
</ul>
<p>In order to build the URL handler executable, you need Visual Studio 2019 or
later.</p>
<h3>To package the add-on for distribution:</h3>
<ol>
<li>Open a command line, change to the root of <a href="https://github.com/nvda-es/TeleNVDA">this repo</a></li>
<li>Run the <strong>scons</strong> command. The created add-on, if there were no errors,
is placed in the current directory.</li>
</ol>
Nuance Vocalizer serieshttp://addons.nvda-project.org/addons/vocalizer.sk.html2023-05-10T20:38:32Z2023-02-22T16:54:31Z
<ul>
<li>Authors: Nuance Communications (distributor: Tiflotecnia, LDA)</li>
<li>download <a href="https://www.nvaccess.org/addonStore/legacy?file=vocalizerautomotive">Vocalizer Automotive driver</a></li>
<li>download <a href="https://www.nvaccess.org/addonStore/legacy?file=vocalizerexpressive">Vocalizer Expressive driver</a></li>
<li>NVDA compatibility: 2019.3 (2022.1 for Expressive) and later</li>
</ul>
<p>Vocalizer synthesizer series (Automotive and Expressive) are a series of
commercial synthesizers from Nuance Communications, with the add-ons
licensed, packaged, and distributed by Tiflotecnia, LDA. These add-ons
include:</p>
<ul>
<li>Vocalizer Automotive (driver 2.x)</li>
<li>Vocalizer Expressive (driver 3.x)</li>
</ul>
<p>For more information and to purchase the package, visit <a href="https://vocalizer-nvda.com/">Tiflotecnia
website</a>.</p>
Virtual Audio Cablehttp://addons.nvda-project.org/addons/virtualAudioCable.sk.html2023-05-10T20:38:32Z2023-02-21T18:28:24Z
<ul>
<li>Author: Doug Lee.</li>
<li>download <a href="https://www.dlee.org/vac/NVDA/vac.nvda-addon">stable version</a></li>
</ul>
<p>This add-on improves usage of Virtual Audio Cable with NVDA. For more
information about this add-on, visit <a href="https://www.dlee.org/vac/NVDA/">TeamTalk add-on homepage</a>.</p>
Skypehttp://addons.nvda-project.org/addons/skype.sk.html2023-05-10T20:38:32Z2023-02-21T18:28:13Z
<ul>
<li>Author: Doug Lee.</li>
<li>download <a href="https://www.dlee.org/skype/NVDA/skype.nvda-addon">stable version</a></li>
</ul>
<p>This add-on improves usage of Skype with NVDA. For more information about
this add-on, visit <a href="https://www.dlee.org/skype/NVDA/">Skype add-on homepage</a>.</p>
Enhanced Annotationshttp://addons.nvda-project.org/addons/enhancedAnnotations.sk.html2024-02-13T14:38:05Z2022-09-04T19:23:14Z
<ul>
<li>Authors: George Kerscher, Noelia Ruiz Martínez</li>
</ul>
<p>In the DAISY Consortium, best practices are developed for publishers and
authors for providing extended (long) descriptions.</p>
<p>The best practices use the HTML details element that follows the image, or a
link to another file that contains the extended description.</p>
<p>In both options, the user would need to move to the details or the link and
activate it.</p>
<p>Having a keystroke to put focus on the details or the link is ideal.</p>
<p>Our best practices recommend that the details or the link immediately
follows the image, and if the link is followed, a back link to the exact
location must be provided. This makes it certain that the user will not get
lost.</p>
<p>However it is probable that authors in the wild will place the extended
(long) description almost anywhere. In these cases, the user would want to
return to the image and hence the need for a way to return to the original
image.</p>
<p>This add-on provides both features, in support of this <a href="https://github.com/nvaccess/nvda/issues/13940">issue opened in
NVDA's repository</a>.</p>
<h2>Commands</h2>
<ul>
<li>NVDA+alt+d: moves the cursor to the element identified with aria-details.</li>
<li>NVDA+alt+shift+d: moves the cursor to the original element, for example,
an image with furter details like a long description. If NVDA+alt+d has
been pressed several times to move to related annotations, it'll be
possible to go back to each origin.</li>
</ul>
<p>The above commands can be modified from NVDA's menu, Preferences submenu,
Input gestures dialog, Browse mode category.</p>
<h2>Changes for 2.0</h2>
<ul>
<li>Added ability to move back through multiple annotation origins.</li>
<li>Requires NVDA 2023.1 or later.</li>
</ul>
MathCAThttp://addons.nvda-project.org/addons/MathCAT.sk.html2024-03-23T11:29:06Z2022-06-08T22:52:30Z
<ul>
<li>Author: Neil Soiffer</li>
<li>NVDA compatibility: 2018.1 or later (untested in earlier versions)</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=mathcat">stable version</a></li>
</ul>
<p>MathCAT is designed to eventually replace MathPlayer because MathPlayer is
no longer supported. MathCAT generates speech and braille from MathML. The
speech for math produced by MathCAT is enhanced with prosody so that it
sounds more natural. The speech can be navigated in three modes using the
same commands as MathPlayer. In addition, the navigation node is indicated
on a braille display. Both Nemeth and UEB technical are supported.</p>
<p>MathCAT has a number of configuration options that control speech,
navigation, and braille. Many of these can be set in the MathCAT settings
dialog (found NVDA Preferences menu). For more information on these
settings, see the <a href="https://nsoiffer.github.io/MathCAT/users.html">MathCAT
documentation</a>. The
documentation includes a link to <a href="https://nsoiffer.github.io/MathCAT/nav-commands.html">a table listing all of the navigation
commands in MathCAT</a>.</p>
<p>Note: MathCAT is a general library for generating speech and braille from
MathML. It is used by other AT projects besides NVDA. For information on the
MathCAT project in general, see the main <a href="https://nsoiffer.github.io/MathCAT">MathCAT Documentation
page</a>.</p>
<p>Who should use MathCAT:</p>
<ul>
<li>Those who need high quality Nemeth braille (MathPlayer's Nemeth is based
on liblouis' Nemeth generation which has a number of significant bugs that
are technically difficult to fix).</li>
<li>Those who need UEB technical braille</li>
<li>Those who want to try out the latest technology and are willing to help by
reporting bugs</li>
<li>Those who use Eloquence as a voice</li>
</ul>
<p>Who should NOT use MathCAT:</p>
<ul>
<li>Anyone who uses MathPlayer with a non-English language (translations exist
for Indonesian and Vietnamese; translations will be coming in the future)</li>
<li>Anyone who uses MathPlayer with a non-Nemeth/non-UEB braille output
(contact me if you want to help out with a braille translation)</li>
<li>Anyone who prefers Access8Math to MathPlayer (for speech or other
features)</li>
</ul>
<p>MathCAT's rules for speech are not yet as extensive as MathPlayer's rules --
that may be another reason to stick with MathPlayer. MathCAT is being used
as a testbed for ideas for MathML 4 that allow authors to express their
intent so that ambiguous notations can be spoken correctly and not guessed
at. I have held off on adding too many rules since the architecture of
MathCAT is centered around using and inferring author intent and these are
not fully settled yet.</p>
<h2>MathCAT Update Log</h2>
<h3>Version 0.5.0</h3>
<ul>
<li>Added German LaTeX braille code. Unlike other braille codes, this
generates ASCII chars and uses the current braille output table to
translate the characters to braille.</li>
<li>Added (expermental) ASCIIMath braille code. Like the LaTeX braille code,
this generates ASCII chars and uses the current braille output table to
translate the characters to braille.</li>
<li>Added "CopyAs" preference that supports copying as MathML, LaTeX, or
ASCIIMath using cntl+C when focused on MathML (as before). The currently
focused node is copied. Note: this is only listed in the prefs.yaml file
and is not exposed (yet) in the MathCAT Preferences dialog.</li>
</ul>
<h3>Version 0.4.2</h3>
<ul>
<li>Fixed language switching when voice changes and MathCAT language is "Auto"</li>
<li>Added more checks for $Impairments to improve reading when it is not set
for those who are blind</li>
<li>Nemeth: fix for "~" when it isn't part of an mrow</li>
<li>UEB: character additions, "~" spacing fix if prefix, xor fix,</li>
<li>MathML cleanup for accented vowels (mainly for Vietnamese)</li>
<li>Major rewrite of preference reading/updating code with big speedup --
added <code>CheckRuleFiles</code> pref to control which files are checked for updates</li>
<li>Added two new interface calls -- enables setting the navigaton location
from the braille cursor (not part of MathCAT addon yet)</li>
</ul>
<h3>Version 0.3.11</h3>
<ul>
<li>Upgraded to python 3.11 and verified working with NVDA 2024.1</li>
<li>Fix bugs in Vietnamese braille and also in Speech, mostly for chemistry.</li>
<li>Fix broken braille when braille code and dependent language don't match
(specifically Vietnam braille and Vietnamese speech)</li>
<li>Fix whitespace bug in HTML inside of tokens</li>
<li>Improve roman numeral detection</li>
</ul>
<h3>Version 0.3.9</h3>
<ul>
<li>Added Traditional Chinese translation (thanks to Hon-Jang Yang)</li>
<li>Fixed bug with navigating into the base of a scripted expression that has
parenthesis</li>
<li>Significantly changed the way whitespace is handled. This mainly affects
braille output (spaces and "omission" detection).</li>
<li>Improved recognition of chemistry</li>
<li>UEB braille fixes that came up from adding chemistry examples</li>
<li>UEB fixes for adding auxillary parenthesis in some cases</li>
</ul>
<h3>Version 0.3.8</h3>
<p>Braille:</p>
<ul>
<li>Dialog has been internationalized for several languages (many thanks to
the translators!)</li>
<li>Initial implementation of CMU -- the braille code used in Spanish and
Portuguese speaking countries</li>
<li>Fix some UEB bugs and added some characters for UEB</li>
<li>Significant improvements to Vietnamese braille</li>
</ul>
<p>Other fixes:</p>
<ul>
<li>Change relative rate dialog slider to have a maximum value of 100% (now
only allows setting slower rates). Also, added step sizes so it is easier
to raise/lower the rate significantly.</li>
<li>Fix eSpeak bug that sometimes cut off speech when the relative rate was
changed</li>
<li>Improvements to Vietnamese speech</li>
<li>Fixed bug with OneCore voices saying "a"</li>
<li>Fixed some navigation bugs when <code>AutoZoomOut</code> is False (not the default)</li>
<li>Fix updating around language changes and some other dialog changes so they
take effect immediately upon clicking "Apply" or "OK".</li>
<li>Added an "Use Voice's Language" option so that out of the box, MathCAT
will speak in the right language (if there is a translation)</li>
<li>Several improvements for cleaning up poor MathML code</li>
</ul>
<h3>Version 0.3.3</h3>
<p>This release has a number of bug fixes in it. The major new features and bug
fixes are:</p>
<ul>
<li>Added Spanish Translation (thanks to Noelia Ruiz and María Allo Roldán)</li>
<li>Modified navigation so that it starts zoomed in one level</li>
<li>Added cntrl+alt+arrow as a way to navigate tabular structures. These keys
should be more memorable because they are used for table navigation in
NVDA.</li>
<li>Worked around NVDA bug for eSpeak voices that caused them to slow down
when the relative MathRate was set to be slower than the text speech rate.</li>
<li>Worked around a OneCore voice problem so that they will speak the long 'a'
sound.</li>
</ul>
<p>There are lots of small tweaks to the speech and some bug fixes for both
Nemeth and UEB.</p>
<p>Note: there is now an option to get Vietnam's braille standard as braille
output. This is still a work in progress and is too buggy to be used other
than for testing. I expect the next MathCAT release will contain a reliable
implementation.</p>
<h3>Version 0.2.5</h3>
<ul>
<li>More improvements chemistry</li>
<li><p>Fixes for Nemeth:</p>
<ul>
<li>Added "omission" rules</li>
<li>Added some rules for English Language Indicators</li>
<li>Added more cases where the Mulitpurpose indicator is needed</li>
<li>Fixes related to Nemeth and punctuation</li>
</ul>
</li>
</ul>
<h3>Version 0.2</h3>
<ul>
<li>Lots of bug fixes</li>
<li>Improvements to speech</li>
<li>A preference setting to control the duration of pausing (works with
changes to relative speech rate for math)</li>
<li>Support to recognize chemistry notation and speak it appropriately</li>
<li>Translations to Indonesian and Vietnamese</li>
</ul>
Speech Loggerhttp://addons.nvda-project.org/addons/speechLogger.sk.html2024-03-22T17:51:48Z2022-05-24T08:27:00Z
<h3>NVDA Speech Logger add-on</h3>
<ul>
<li>Author: Luke Davis, with contributions by James Scholes</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=speechLogger">stable version</a></li>
<li>NVDA compatibility: 2019.3.1 and later</li>
</ul>
<p>An <a href="https://nvaccess.org/">NVDA</a> add-on to log speech to a file or files. It can log speech
generated on the local machine into a text file. It can also log speech
from a remote machine received through the <a href="https://nvdaremote.com/">NVDA Remote</a> add-on, either
to the same or a different file.</p>
<h3>Configuration</h3>
<p>To configure this add-on, open the NVDA menu, go to Preferences, then
Settings, then Speech Logger (NVDA+N, P, S, then press S until you get
there, on a default U.S. English keyboard). There is also an unassigned
gesture in the Input Gestures "Configuration" category, which you can assign
and use to quickly open the add-on's settings directly. Note: the add-on
can only be configured while in the Normal Configuration profile of NVDA.
The add-on is not profile-aware. If you can think of some use case that
requires it to operate differently in different profiles, please contact the
author or file an issue on the <a href="https://github.com/opensourcesys/speechLogger/issues/new">GitHub repo</a>.</p>
<h3>The following settings are available:</h3>
<ul>
<li>The log directory. You can enter or browse for your desired destination
directory, which must already exist. System variables such as %temp%,
%userprofile%, etc., can be used in this field.</li>
<li>Local log filename. The created file will be placed in the above
directory. This will contain speech logged while the local log mode is
engaged. This can be the same as the remote log file. Leave blank to
disable this kind of logging completely.</li>
<li>Remote log filename. The created file will be placed in the above
directory. This will contain speech logged while the remote log mode is
engaged. It can be the same as the local log file. Leave blank to disable
this kind of logging completely.</li>
<li>Separator. This combobox lets you choose one of the available utterance
separators. See below for more information.</li>
<li>Custom separator. This field lets you enter a custom utterance separator
(see below), which is used if "custom" is chosen in the combobox.</li>
<li>Timestamp mode. This combobox allows you to choose between no timestamps,
and a timestamp at the start and end of each log session.</li>
<li>Log speech during say-all (read to end) mode. This add-on logs speech
generated when you press NVDA+DownArrow (NVDA+a in laptop layout). If you
would rather not have that kind of narrative long reading logged, un-check
this box.</li>
<li>Begin logging at startup. You can set this option to "Always", if you want
speech to be logged automatically when NVDA starts. This only applies to
local speech, and the default is "never".</li>
</ul>
<h4>Utterance separator</h4>
<p>When NVDA speaks something such as "<code>recycle bin 1 of 55</code>" while it's
reading your desktop, this is considered two separate utterances. The first
one is the item name ("<code>Recycle bin</code>", in this example), and the second is
the object position information ("<code>1 of 55</code>", in this example).</p>
<p>Depending on what you are reading, and how you have NVDA configured, there
can be several separate utterances that happen during a single speech
sequence.</p>
<p>In the normal NVDA log at debug level, each individual utterance is
separated with two spaces, as it is written in the example above.</p>
<p>Speech Logger allows you to separate utterances in the same way NVDA does
(with two spaces), or by one of a few reasonable alternatives (a newline, a
comma and a space, a tab, two underscores), or by a custom sequence of your
own devising.</p>
<p>If, for example, you wanted your utterance separator to be two dollar signs
(<code>$$</code>), you would set the combobox to "custom", and enter "<code>$$</code>" (without
the quotes), in the custom separator field. If you wanted it to be a
newline followed by a tab, you could enter "<code>\n\t</code>".</p>
<h3>Controls:</h3>
<p>This add-on has two keyboard shortcuts set by default, and one that is
unassigned.</p>
<p>The default gestures, which you can change in the NVDA Input Gestures
"<code>Speech Logger</code>" category, are:</p>
<ul>
<li>NVDA+Alt+L: start/stop logging of local speech.</li>
<li>NVDA+Shift+Alt+L: start/stop logging of remote speech.</li>
</ul>
<p>These are listed as "Toggles logging of local speech" and "Toggles logging
of remote speech", respectively.</p>
<p>Additionally, it has one unassigned gesture for opening its configuration
panel, which you may assign from the <code>Speech Logger</code> category in NVDA's
Input Gestures.</p>
<h3>A note on remote speech logging</h3>
<p>This add-on is intended to work with the NVDA Remote add-on, for logging of
remote speech.</p>
<p>It is important to know, that it is not possible to start logging for remote
sessions until you actually start one. There is no way to, for example,
start logging, and have it wait, on stand-by, until a remote session starts,
and begin logging at that time.</p>
<p>However, once started, logging will continue across remote sessions.</p>
<h3>Feedback and feature requests</h3>
<p>If you would like to suggest a feature or report a bug, please reach out by
email, or file an <a href="https://github.com/opensourcesys/speechLogger/issues/new">issue</a>.</p>
<p>If you find this add-on useful, it would really help if you could <a href="https://github.com/nvaccess/addon-datastore/discussions/2636">leave a
review</a>.</p>
<p>As always, I appreciate hearing that my add-ons are helpful, and finding out
what people are using them for.</p>
Cursor Locatorhttp://addons.nvda-project.org/addons/cursorLocator.sk.html2024-02-13T14:37:11Z2022-05-23T06:31:52Z
<ul>
<li>Authors: Noelia Ruiz Martínez, Sergio Gómez Codina.</li>
</ul>
<p>This add-on makes possible to know the position of the system caret respect
to the start of the current line, while typing to add text in documents or
multiline controls.</p>
<p>This feature deppends on the visual appearance of applications. Therefore,
you may need to disable line adjustment or configure the add-on for
different programs.</p>
<h2>Cursor Locator settings</h2>
<p>This panel is available from NVDA's menu, Preferences submenu, Settings
dialog.</p>
<p>It provides the following options:</p>
<ul>
<li>Report line length: You can type or choose a line length (number of
characters between 0 and 600), which will be announced by a hight tone
when it's reached. (The default value is 80 characters).</li>
<li>Maximum number of beeps for start of line notification: You can type or
select a value between 0 and 600. The default value is 0.</li>
<li>Maximum number of beeps for end of line notification: You can type or
select a value between 0 and 600. The default value is 0.</li>
<li>Pitch of sound for start of line: You can type or select a value between
20 and 20000. (The default value is 400 hertzs).</li>
<li>Length of sound for start of line: You can type or select a value between
20 and 2000. (The default value is 50 milliseconds).</li>
<li>Test sound for start of line: Press this button to test the configured
sound for start of line.</li>
<li>Pitch of sound for end of line: You can type or select a value between 20
and 20000. (The default value is 1000 hertzs).</li>
<li>Length of sound for end of line: You can type or select a value between 20
and 2000. (The default value is 50 milliseconds).</li>
<li>Test sound for end of line: Press this button to test the configured sound
for end of line.</li>
</ul>
<h2>Commands</h2>
<p>You can modify the gestures to the following commands trought the NVDA's
menu, Preferences submenu, Input gestures dialog:</p>
<ul>
<li>NVDA+control+shift+l: When possible, reports the lenght of the current
line (System caret category).</li>
<li>Not assigned: Shows the Cursor Locator settings dialog (Config category).</li>
</ul>
<h2>Changes for 3.0</h2>
<ul>
<li>Compatible with NVDA 2023.1.</li>
</ul>
<h2>Changes for 2.0</h2>
<ul>
<li>Added ability to repeat notifications when reaching end and start of line.</li>
<li>Added support for Office documents, and Notepad on Windows 11.</li>
</ul>
<h2>Changes for 1.0</h2>
<ul>
<li>Initial version</li>
</ul>
Screenshots wizardhttp://addons.nvda-project.org/addons/screenshots.sk.html2024-02-13T14:36:29Z2022-04-27T17:44:53Z
<ul>
<li>Author: Javi Domínguez.</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=scrsw">stable version</a>, compatible with NVDA 2021.2 and beyond.</li>
</ul>
<p>This add-on provides a wizard to take screenshots of the entire screen or
specific areas such as objects, windows, etc. It is activated by the <em>print
screen</em> key which on standard keyboards is usually the first of the group of
three to the right of F12. If you prefer to use another, it can be
configured in the NVDA preferences, input gestures.</p>
<p>When the wizard is invoked, a virtual rectangle is created around the object
with focus and a layer of keyboard commands is activated with the following</p>
<h2>commands</h2>
<ul>
<li>F1 presents an help message with basic commands; pressing twice opens this
document.</li>
</ul>
<h3>Rectangle information</h3>
<p>Keys 1 through 7 provide the following information:</p>
<ul>
<li>1: Coordinates of the upper left and lower right corners.</li>
<li>2: Rectangle dimensions, width per height.</li>
<li>3: The reference object.</li>
<li>4: Proportion of the rectangle area occupied by the reference object.</li>
<li>5: Indicates if part of the reference object is outside the rectangle.</li>
<li>6: Indicates if the rectangle exceeds the limits of the active window in
the foreground.</li>
<li>7: Proportion of the screen occupied by the rectangle.</li>
</ul>
<p>The space key reads all this information in a row.</p>
<h3>Object selection</h3>
<p>The reference object is the object on the screen that is delimited by the
rectangle at all times. First, this object will be the one with the focus of
the system, but another can be selected with the following keys:</p>
<ul>
<li>Up arrow: frames the container of the current object.</li>
<li>F: Frames the object with the focus.</li>
<li>N: Frames the object in the objects navigator.</li>
<li>W: Frames the active window.</li>
<li>M: frames the object under the mouse pointer.</li>
<li>S: Frames the entire screen.</li>
</ul>
<p>With down arrow the changes are undone.</p>
<h3>Rectangle size</h3>
<p>The size of the rectangle can be modified using the following keys:</p>
<ul>
<li>With shift + arrows the upper left corner is moved:</li>
<li>shift + up or down arrow moves the top edge,</li>
<li>shift + left or right arrow moves the left edge.</li>
<li>With control + arrows the lower right corner is moved:</li>
<li>control + up or down arrow moves the bottom edge,</li>
<li>control + left or right arrow moves the right edge.</li>
<li>control + shift + up arrow expands the rectangle, moving all four edges
outward.</li>
<li>control + shift + down arrow contracts the rectangle, moving all four
edges inward.</li>
</ul>
<p>The number of pixels for these movements can be changed with the page up and
page down keys. Also in preferences.</p>
<p>By resizing the rectangle the reference object may change. It will always
try to select the object that is centered, in the foreground and that
occupies a larger area within the rectangle. Object changes will be
announced when they occur.</p>
<h3>Capture the image</h3>
<p>Enter key captures the image of the screen area delimited by the rectangle,
it is saved in a file and exits.</p>
<p>Escape key cancels and exits.</p>
<h2>Settings</h2>
<p>In NVDA preferences, options, the following settings can be configured:</p>
<ul>
<li>The folder where the files will be saved. The user's documents folder by
default.</li>
<li>The image file format.</li>
<li>The action after saving (nothing, open the folder or open the file).</li>
<li>The number of pixels for each movement.</li>
</ul>
Proxy support for NVDAhttp://addons.nvda-project.org/addons/proxy.sk.html2023-05-10T20:38:33Z2022-04-27T09:43:44Z
<ul>
<li>Author: Jose Manuel Delicado</li>
<li>NVDA compatibility: 2022.4 and beyond</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=proxy">stable version</a></li>
</ul>
<p>This add-on allows the NVDA screen reader to connect to the Internet through
one or more proxy servers. To make it possible, it applies various patches
to the standard Python library or modifies certain environment variables,
depending on the chosen configuration. You will be able to update NVDA and
their add-ons automatically from your corporate environment and even perform
remote sessions, provided that your organization proxy server allows it.</p>
<h2>Features</h2>
<ul>
<li>Support for various proxy server types: http, socks4 and socks5.</li>
<li>Ability to redirect all traffic through the proxy server or only specific
traffic (http, https, ftp).</li>
<li>Ability to redirect all traffic through a proxy server and, after that,
redirect specific traffic through other servers (nested proxies).</li>
<li>Profile switch and config reset aware: if you usually work with a portable
copy of NVDA, you can create various profiles for different environments
(home, work, office1, office2) and manually activate them.</li>
</ul>
<h2>Usage</h2>
<p>This add-on adds a new category to the NVDA settings dialog called
"Proxy". In this category, you will find four settings groups. The first one
allows you to configure a general proxy for all traffic. The other groups
allow you to configure proxy servers only for specific protocols. All groups
have the following fields:</p>
<ul>
<li>Host: hostname or ip address of the proxy server. Leave empty to disable
that particular proxy.</li>
<li>Port: server port.</li>
<li>Username: optional. User name for server authentication.</li>
<li>Password: optional. Password for server authentication. Note that password
is not required for socks4 servers.</li>
</ul>
<p>In addition to the previous fields, the following options are available in
the first settings group:</p>
<ul>
<li>SOCKS proxy type: socks4, socks5 or http can be selected.</li>
<li>Use proxy for dns requests if possible: when this checkbox is checked,
hostnames or domain names will be directly sent to and resolved on the
proxy server. When it is unchecked, names will be resolved locally and the
server will receive only the destination ip address. Note that not all
socks4 proxy servers support this option.</li>
</ul>
<p>Tipically, most users will only have to configure the first settings
group. If you don't know your proxy details, ask your organization network
administrator for more information.</p>
<h2>Limitations</h2>
<ul>
<li>Very limited IPV6 support.</li>
<li>UDP traffic is not supported on all proxy servers.</li>
<li>External DLL libraries won't respect the settings configured in this
add-on.</li>
<li>Only basic authentication is supported for http proxy servers. Digest
authentication is not supported.</li>
<li>In order to redirect all traffic (including https connections) through an
http proxy, the server must support the CONNECT http method.</li>
<li>A "direct connection" mode can't be configured. If you disable a specific
proxy, the system default will be used instead.</li>
</ul>
<h2>Changelog</h2>
<h3>Version 1.2</h3>
<ul>
<li>Compatible with NVDA 2023.1.</li>
<li>For security reasons, minimum NVDA version is set to 2022.4.</li>
<li>Updated translations.</li>
</ul>
<h3>Version 1.1</h3>
<ul>
<li>Compatible with NVDA 2022.1.</li>
<li>For security reasons, minimum NVDA version is set to 2021.3.</li>
<li>Patch socket.getaddrinfo function when "Use proxy for dns requests if
possible" checkbox is checked and a general proxy has been configured.</li>
</ul>
<h3>Version 1.0</h3>
<ul>
<li>Initial release.</li>
</ul>
NVDAUpdate Channel Selectorhttp://addons.nvda-project.org/addons/updateChannel.sk.html2023-10-15T16:25:29Z2022-04-27T09:43:44Z
<ul>
<li>Author: Jose Manuel Delicado</li>
<li>NVDA compatibility: 2022.4 and beyond</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=updateChannel">stable version</a></li>
</ul>
<p>This add-on allows you to download and install the latest NVDA version of
the chosen type without visiting any webpage nor using your web browser. It
is useful when, for example, you want to test new features in a NVDA
snapshot and then return back to the most recent stable release. If you test
regularly NVDA snapshots and you usually install them in your computer, you
will save a lot of time with this add-on. If you prefer testing snapshots in
portable mode keeping your installed copy of NVDA unchanged, this add-on is
for you as well.</p>
<h2>Usage</h2>
<p>You can change the NVDA update channel by going to NVDA menu, Preferences,
Settings, Update channel category. Once you choose the desired channel and
press OK, wait until the next automatic update check or go to NVDA help menu
and choose "Check for updates" option. For now, these are the available
channels:</p>
<ul>
<li>Default: this is the default channel used by your NVDA version. Choosing
this option means the same as disabling the add-on.</li>
<li>Stable: force update channel to stable. Useful when you want to return to
a stable version from a snapshot.</li>
<li>Rc and beta: this is the channel for beta releases. You will receive the
first beta version once it is released. This channel allows you to update
through betas and release candidates.</li>
<li>Alpha (snapshots): choose this option to update to the latest alpha. Alpha
snapshots allows you to test new features, but they are quite
unstable. Please, be careful.</li>
<li>Disable updates (not recommended): this option disables the update
channel. If you check for updates an error message will be
displayed. Remember that you can disable automatic updates from the
General settings category. Use this option only with testing purposes.</li>
</ul>
<p>Information about available updates for each channel will be retrieved in
the background once the settings panel is opened. Press tab to navigate to a
read only edit field, where you can see this information. This information
will be dynamically updated when you change the update channel from the
combo box. If there is an update available for the selected channel, one or
two links will appear next to the edit field:</p>
<ul>
<li>Download: press spacebar on this link to open it in your web browser and
download the latest installer.</li>
<li>View changelog: press spacebar on this link to open the What's new
document in your web browser. For some channels, this link won't be
displayed.</li>
</ul>
<h2>Changelog</h2>
<h3>Version 1.4</h3>
<ul>
<li>Updated translations.</li>
<li>Compatible with NVDA 2023.1.</li>
<li>For security reasons, minimum NVDA version is set to 2022.4.</li>
</ul>
<h3>Version 1.3</h3>
<ul>
<li>Updated translations.</li>
<li>Fixed a bug which prevented creating portable copies from alpha snapshots.</li>
</ul>
<h3>Version 1.2</h3>
<ul>
<li>Updated translations.</li>
<li>Compatible with NVDA 2022.1.</li>
<li>For security reasons, minimum NVDA version is set to 2021.3.</li>
<li>Workaround for a bug in the NV Access server which caused version 2019.2.1
to be offered when updating from alpha to stable.</li>
</ul>
<h3>Version 1.1</h3>
<ul>
<li>Removed unsupported channels.</li>
<li>Updated translations.</li>
<li>Added information of currently available updates to the settings panel.</li>
</ul>
<h3>Version 1.0</h3>
<ul>
<li>Initial version.</li>
</ul>
Application Dictionaryhttp://addons.nvda-project.org/addons/applicationDictionary.sk.html2023-05-10T20:38:32Z2022-03-28T04:38:39Z
<h2>Informations</h2>
<ul>
<li>Authors: Rui Fontes and Ricardo M. Leonarczyk with colaboration of Cyrille
Bougot</li>
<li>Version: 2022.03.26</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=applicationDictionary">stable version</a></li>
<li>Compatibility: NVDA 2019.3 and beyond</li>
</ul>
<h2>Usage</h2>
<p>This simple add-on makes possible to create application-specific
dictionaries for NVDA. To use the add-on, just go to the application for
wich you want a dictionary for, and press NVDA+control+shift+d. The normal
NVDA dictionary dialog will open for you to add entries valid only for the
active application (the application name should appear in the dialog
title). The default add-on shortcut can be changed through NVDA's input
gestures dialog: under configuration node, expand the node that says "Shows
the application-specific dictionary dialog".</p>
<h2>Command</h2>
<p>NVDA+Control+Shift+d</p>
<h2>Automatic update</h2>
<p>This add-on includes an automatic update feature. The check for a new
version will be executed everytime NVDA is loaded. If you want this, go to
NVDA, Preferences, Options and in the add-on category check the check box.</p>
Sound Splitterhttp://addons.nvda-project.org/addons/soundSplitter.sk.html2023-05-10T20:38:32Z2022-01-31T02:30:36Z
<ul>
<li>Authors: Joseph Lee, Luke Davis and contributors</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=soundSplitter">stable version</a></li>
<li>NVDA compatibility: 2022.4 and later</li>
</ul>
<p>This add-on, partly based on Tony's Enhancements by Tony Malykh, adds the
ability to split audio from NVDA and other sounds onto separate audio
channels.</p>
<p>Note: this add-on is not intended to be used in secure screens.</p>
<h2>Commands:</h2>
<ul>
<li>Alt+NvDA+S: toggle sound splitter between enabled with NVDA on the right
channel, NVDA on the left channel, or disabled.</li>
</ul>
<h2>Sound Splitter settings</h2>
<p>You can configure add-on settings from NVDA menu/Preferences/Settings/Sound
Splitter category.</p>
<ul>
<li>Split NVDA sound and applications' sounds into left and right channels:
checkinb this checkbox will enable sound splitting feature.</li>
<li>Switch left and right during sound split: by default, NVDA will be heard
through the right channel if sound splitting is on. You can instead hear
NVDA through the left channel by checking this checkbox.</li>
</ul>
<h2>Version 23.02</h2>
<ul>
<li>NVDA 2022.4 or later is required.</li>
<li>Windows 10 21H2 (November 2021 Update/build 19044) or later is required.</li>
</ul>
<h2>Version 23.01</h2>
<ul>
<li>NVDA 2022.3 or later is required.</li>
<li>Windows 10 or later is required as Windows 7, 8, and 8.1 are no longer
supported by Microsoft as of January 2023.</li>
<li>Updated psutil dependency to 5.9.4.</li>
</ul>
<h2>Version 22.03</h2>
<ul>
<li>NVDA 2021.3 or later is required.</li>
<li>Improved security by not loading the add-on when NVDA is running in secure
mode.</li>
<li>Updated psutil dependency to 5.9.0.</li>
<li>Changed sound splitter toggle command (Alt+NVDA+S) to toggle between NVDA
on the right channel, on the left channel, or sound splitter disabled.</li>
</ul>
<h2>Version 22.02.1</h2>
<ul>
<li>Fixed NVDA and app audio not being restored to both audio channels after
the add-on is disabled or uninstalled.</li>
</ul>
<h2>Version 22.02</h2>
<ul>
<li>Initial version based on Tony Malykh's Tony's Enhancements add-on.</li>
</ul>
Quick Notetakerhttp://addons.nvda-project.org/addons/quickNotetaker.sk.html2024-02-13T14:36:16Z2021-10-08T10:23:30Z
<ul>
<li>Authors: Eilana Benish, Mohammad Suliman</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=quickNotetaker">stable version</a></li>
<li>NVDA compatibility: 2019.3 to 2022.1</li>
</ul>
<p>The Quick Notetaker add-on is a wonderful tool which allows writing notes
quickly and easily anytime and from any app the user is using. Whether the
user is watching a video for example, or participating in a meeting on Zoom,
teams or Google meet, they can easily and smoothly open the notetaker and
take a note. In order to create a quick note, NVDA + Alt + n key combination
can be used, a floating window appears at the top left corner of the screen,
so the note can be typed there.</p>
<p>Every note that is being Created can optionally get the active window title,
and as such, the note content can get the context in which this note was
created by having the note title as the active window title the user was
using. This behavior can be changed from the add-on settings, where the user
can decide whether the active window title is captured when creating a new
note.</p>
<h2>The Notetaker dialog</h2>
<ul>
<li><p>The note edit area: When opening the Notetaker interface the focus will
be in this edit area. Writing with Markdown (a markup language to easily
produce HTML content) is supported also. For more info on Markdown visit
<a href="https://www.markdownguide.org/">the Markdown guide page</a>.</p></li>
<li><p>Preview note: to view the note in an HTML window.</p></li>
<li><p>Copy: to copy the note as is to the clipboard.</p></li>
<li><p>Copy HTML code: to copy the HTML code representing the note. A useful
feature for those who write in Markdown.</p></li>
<li><p>A checkbox to allow saving the note as Microsoft Word also, or updating
the corresponding one if it exists.</p></li>
<li><p>A save and close button.</p></li>
<li><p>A discard button to discard changes when desired. When unsaved changes
exist, a warning message is displayed to the user asking if they are
sure they want to exit and discard their changes.</p></li>
</ul>
<h2>The Notes Manager interface</h2>
<h3>Opening and closing this interface</h3>
<ul>
<li><p>NVDA + Alt + v will launch the Notes Manager interface.</p></li>
<li><p>Using either the Escape key or the close button found at the bottom of
this window will close this interface.</p></li>
</ul>
<h3>The notes list</h3>
<p>The notes are organized in a tabular list which includes:</p>
<ol>
<li><p>The note title: If the note hasn’t got the active window title, the
first line of the note will be the note title displayed in this list.</p></li>
<li><p>Last edited time stamp.</p></li>
<li><p>A preview text of the note content.</p></li>
</ol>
<h3>The options available in Notes Manager interface</h3>
<ul>
<li><p>View note: to view the note in an HTML window.</p></li>
<li><p>Edit note: opens the note to be edited using Notetaker interface.</p></li>
<li><p>Copy note: copies the note content as is to the clipboard.</p></li>
<li><p>Create a Microsoft Word document: Creates a Microsoft Word document
representing this note in case it has no such document.</p></li>
<li><p>Open in Microsoft Word: opens the Microsoft Word document attached to
this note in case it has a one.</p></li>
<li><p>Copy HTML code: copies the HTML code representing this note. A useful
feature for those who write in Markdown.</p></li>
<li><p>Delete note: displays a warning before performing the note deletion.</p></li>
<li><p>New note: the Notetaker interface can be reached from this interface to
create a new note.</p></li>
<li><p>Open settings: opening the add-on settings is also possible from here.</p></li>
<li><p>Close: to close the window.</p></li>
</ul>
<h2>The add-on settings</h2>
<p>The add-on settings are a part of NVDA’s settings interface. To reach those
settings, the user needs to open the NVDA menu using NVDA key + n, choose
preferences > settings, and then arrow down until reaching Quick
Notetaker category.</p>
<p>Using the settings interface the user can:</p>
<ul>
<li><p>Default documents directory: to choose the default directory where Quick
Notetaker documents will be saved. The user can press the “Browse”
button to change the path of this directory.</p></li>
<li><p>Ask me each time where to save the note's corresponding Microsoft Word
document: a checkbox (not checked by default) – to show the dialog for
choosing the location where the document will be saved on each save or
update operation for the note’s Microsoft Word document if such a one
exists.</p></li>
<li><p>Open the note's corresponding Microsoft Word document after saving or
updating: a checkbox (not checked by default) – to allow the user to
choose whether the Microsoft Word document will be opened after a save
or update operation in case the note has such document.</p></li>
<li><p>Capture the active window title when creating a new note: a checkbox
(checked by default) – to allow the note to get the active window title
the user was using when they created the note. This title will be also
the title of the Microsoft Word document for the note in case it has a
one.</p></li>
<li><p>Remember the note taker window size and position: a checkbox (not
checked by default) – to tell the add-on to remember the size and the
position of the Notetaker dialog when creating or editing a note. As
such, when the user opens the dialog next time, the position and the
size will be the same as the last time the dialog was used. The default
position of this dialog is at the top left corner of the screen.</p></li>
<li><p>Auto align text when editing notes (relevant for RTL languages): a
checkbox (checked by default) – to control whether the text when
creating or editing a note should be auto aligned according to the
language used. This is mostly relevant for right to left languages. For
example, if the language used is Arabic or Hebrew, then the text will be
right aligned when this option is chosen, if the language is English or
French, then the text will be left aligned.</p></li>
</ul>
<h2>Keyboard shortcuts</h2>
<ul>
<li><p>NVDA + Alt + n: to open the Notetaker interface.</p></li>
<li><p>NVDA + Alt + v: to open the Notes Manager interface.</p></li>
</ul>
<h3>Keyboard shortcuts in the different interfaces</h3>
<table>
<colgroup>
<col />
<col />
<col />
</colgroup>
<thead>
<tr class="header">
<th>Interface</th>
<th>Command</th>
<th>Keyboard shortcut</th>
</tr>
</thead>
<tbody>
<tr class="odd">
<td>Notetaker</td>
<td>Focus the note edit area</td>
<td>Alt + n</td>
</tr>
<tr class="even">
<td>Notetaker</td>
<td>Align text to the right</td>
<td>Control + r</td>
</tr>
<tr class="odd">
<td>Notetaker</td>
<td>Align text to the left</td>
<td>Control + l</td>
</tr>
<tr class="even">
<td>Notetaker</td>
<td>Preview note in an HTML window</td>
<td>Alt + r</td>
</tr>
<tr class="odd">
<td>Notetaker</td>
<td>Copy</td>
<td>Alt + p</td>
</tr>
<tr class="even">
<td>Notetaker</td>
<td>Copy HTML code</td>
<td>Alt + h</td>
</tr>
<tr class="odd">
<td>Notetaker</td>
<td>Save note as a Microsoft Word document</td>
<td>Alt + w</td>
</tr>
<tr class="even">
<td>Notetaker</td>
<td>Update the note corresponding Microsoft Word document</td>
<td>Alt + w</td>
</tr>
<tr class="odd">
<td>Notetaker</td>
<td>Save and close</td>
<td>Alt + s</td>
</tr>
<tr class="even">
<td>Notetaker</td>
<td>Discard</td>
<td>Alt + d</td>
</tr>
<tr class="odd">
<td>Notetaker</td>
<td>Open notes Manager</td>
<td>Alt + m</td>
</tr>
<tr class="even">
<td>Notes Manager</td>
<td>View note</td>
<td>Alt + v</td>
</tr>
<tr class="odd">
<td>Notes Manager</td>
<td>Edit note</td>
<td>Alt + e</td>
</tr>
<tr class="even">
<td>Notes Manager</td>
<td>Copy note</td>
<td>Alt + p</td>
</tr>
<tr class="odd">
<td>Notes Manager</td>
<td>Open in Microsoft Word (if such a document exists)</td>
<td>Alt + o</td>
</tr>
<tr class="even">
<td>Notes Manager</td>
<td>Create a word document for a saved note</td>
<td>Alt + w</td>
</tr>
<tr class="odd">
<td>Notes Manager</td>
<td>Copy HTML code</td>
<td>Alt + h</td>
</tr>
<tr class="even">
<td>Notes Manager</td>
<td>Delete note</td>
<td>Alt + d</td>
</tr>
<tr class="odd">
<td>Notes Manager</td>
<td>New note</td>
<td>Alt + n</td>
</tr>
<tr class="even">
<td>Notes Manager</td>
<td>Open settings</td>
<td>Alt + s</td>
</tr>
<tr class="odd">
<td>Notes Manager</td>
<td>Close the interface</td>
<td>Alt + c</td>
</tr>
<tr class="even">
<td>The settings interface</td>
<td>Ask me each time where to save the note's corresponding Microsoft Word document</td>
<td>Alt + w</td>
</tr>
<tr class="odd">
<td>The settings interface</td>
<td>Open the note's corresponding Microsoft Word document after saving or updating</td>
<td>Alt + o</td>
</tr>
<tr class="even">
<td>The settings interface</td>
<td>Capture the active window title when creating a new note</td>
<td>Alt + c</td>
</tr>
<tr class="odd">
<td>The settings interface</td>
<td>Remember the note taker window size and position</td>
<td>Alt + r</td>
</tr>
<tr class="even">
<td>The settings interface</td>
<td>Auto align text when editing notes (relevant for RTL languages)</td>
<td>Alt + t</td>
</tr>
</tbody>
</table>
<h2>Acknowledgements</h2>
<ul>
<li><p>The add-on comes bundled with Pandoc, a wonderful tool which allows
converting documents between different formats. Without this tool the
add-on won’t be able to offer the capabilities it offers. For more info
on Pandoc <a href="https://pandoc.org/">visit the Pandoc homepage</a>.</p></li>
<li><p>The add-on also relies on a Python Markdown package called
markdown2. For more info on this package <a href="https://github.com/trentm/python-markdown2">visit the package GitHub
page</a>.</p></li>
<li><p>A great thanks to NV Access, add-on authors, and contributors! Several
parts of the add-on were inspired by your magnificent work and effort,
so please keep up this brilliant ecosystem and the cooperation.</p></li>
</ul>
<h2>Changes for 1.1</h2>
<ul>
<li>This release adds compatibility for NVDA 2022.1 and above;</li>
<li>Fixed a bug with displaying the note title in Notes manager;</li>
<li>Added German and Chinese translation;</li>
<li>To elaborate on the bug with displaying the note title, the previous
version included a bug where the whole text of the note was displayed to
be the title of the note, which wasn't the intention of the
developers. The bug is now fixed;</li>
<li>the newly created notes will have their title as the first line of the
note;</li>
<li>For existing notes, the user can select the note from the notes list in
Notes Manager, click "Edit note", and then click "Save and close";</li>
<li>We made it possible to be able to edit the note even without needing to
change the content to allow the user to overcome this bug.</li>
</ul>
<h2>Changes for 1.0</h2>
<p>Initial version.</p>
Ignore Blanks Indentation Reportinghttp://addons.nvda-project.org/addons/ignoreBlanksIndentationReporting.sk.html2024-02-13T14:35:06Z2021-08-10T16:58:00Z
<ul>
<li>Author: Samuel Kacer</li>
<li>NVDA compatibility: 2021.1 and beyond</li>
<li>Download <a>stable version</a></li>
</ul>
<p>This is an NVDA addon that alters the reporting of indentation by
disregarding blank lines when deciding whether to report changes in
indentation. It is best understood by contrasting with normal behaviour with
an example.</p>
<p>Consider this example:</p>
<pre><code>def foo():
x = 42
return x
def bar():
</code></pre>
<p>The current behaviour of NVDA is to report indentation changes for any line
where the indentation has changed, even if the line is blank. So, the
example would be read like:</p>
<pre><code>def foo():
tab x = 42
no indent blank
tab return x
no indent blank
def bar():
</code></pre>
<p>The disadvantage for this behaviour is that for most programming languages,
like python, a blank line has no semantic significance and is just used to
visually separate lines of code with no change to the code's
meaning. Therefore, by reporting the change of indentation upon entering a
blank line and then reporting it again after landing on the next line is
just noise that makes it harder to focus on understanding the code.</p>
<p>This addon aims to improve on the behaviour by ignoring blank lines when
computing indentation speech, thus the example is read like this instead:</p>
<pre><code>def foo():
tab x = 42
blank
return x
no indent def bar():
</code></pre>
<h2>Change log</h2>
<h3>v0.4</h3>
<ul>
<li>support NVDA version 2022.3+, including 2023.1</li>
</ul>
<h3>version 0.3</h3>
<ul>
<li>support NVDA version 2021.3+</li>
<li>tested compatibility with NVDA 2022.1</li>
</ul>
<h3>version 0.2</h3>
<ul>
<li>fix crash while reading math content</li>
</ul>
<h3>version 0.1</h3>
<ul>
<li>Initial release</li>
</ul>
<h2>Source code</h2>
<p><a href="https://github.com/SamKacer/IgnoreBlanksIndentation">Source code repository</a></p>
<p>https://www.nvaccess.org/addonStore/legacy?file=ignoreBlanksIndentationReporting</p>
Search Withhttp://addons.nvda-project.org/addons/searchWith.sk.html2024-02-13T14:36:00Z2021-08-05T17:27:48Z
<ul>
<li>Author: Ibrahim Hamadeh</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=searchwith">Stable Version</a></li>
<li>NVDA compatibility: 2019.3 and beyond</li>
</ul>
<p>This addon helps you to search text, via various search engines. Let no text
selected, and press the gesture of the addon, a dialog will be displayed,
with an edit box to enter a search query, to search with Google press enter,
or tab to search with other engins.</p>
<p>And if you want to search for selected text, select some text and press
once, a menu will be displayed with various search engines to choose. and
you can if you like, press the gesture twice to search selected text with
Google directly.</p>
<p>The Default gesture for the addon is: NVDA+ Windows+ S. If the keystroke do not work for you, or conflict with other keystroke, you can as always add a gesture or change the existent one going to: NVDA menu>preferences>inputGestures>Search With category.</p>
<h2>Usage</h2>
<ul>
<li>If you want to enter a search query, just press the addon gesture. A
dialog will be displayed, with an edit field to enter the search term.</li>
<li>Want to search with Google? just press enter.</li>
<li>Otherwise tab to Other Engines button, and give it a space, a popup menu
will show up, with various search engines to choose. Yahoo, Bing,
DuckDuckGo, and Youtube. This is the default menu, and you may modify it
from addon's setting panel.</li>
<li>Another way to use the addon, is by selecting some text. And on Pressing
the addon's gesture, or any other you have assigned to it, a virtual menu
will be displayed with various search engines, either the default menu, or
any other you have tailed to your needs.</li>
<li>Choose one and press enter, the default browser will open displaying
search results. or, if you want to search with Google directly, press the
gesture twice, and you are done.</li>
<li>Want to trigger search menu specifically for clipboard or last spoken
text? OK, then you can from input gestures dialog, assigned a gesture for:
<ul>
<li>Trigger search menu for clipboard text, and pressed twice searches
that text by Google directly.</li>
<li>Trigger search menu for last spoken text, and pressed twice searches
that text by Google directly.</li>
</ul>
</li>
<li>Want to modify Search with menu? Yes you can do that from the setting
panel, and adjust the menu to fit to your mood and needs.</li>
<li>You can from there, add to Search with menu, other available search
engines. And you can if you like, remove an item from it, move item up,
move item down, or return and set menu to default state.</li>
<li>If you want these modifications to be permanent, you have to save
configuration after wards.</li>
<li>Want to search Google using other language options?</li>
<li><p>Then, go to Search With category in setting panels, from the cumbo box
there, you can choose search Google either:</p>
<ol>
<li>Using browser settings and language.</li>
<li>Using NVDA language.</li>
<li>Using windows language.</li>
</ol>
</li>
<li><p>Moreover, you have the option to choose the default query in Search with
dialog. From the Options for default query combo box in setting panel, you
can choose either</p>
<ul>
<li>Leave blank</li>
<li>Use clipboard text</li>
<li>Use last spoken text</li>
</ul>
</li>
<li><p>And if clipboard or last spoken text is chosen, text in search box will be
displayed selected, so that you can easily override it.</p></li>
<li>Now let's choose the target language for translate engines, Google
Translate and DeepL translator.</li>
<li>Still in setting panel, under Translation engines group, there are two
combo boxes, one for Google Translate and the other for DeepL
Translator. Choose the target language you want for each of them and you
are done.</li>
<li>Lastly, especially for advanced users</li>
<li>You can through a check box in setting panel, choose if you want to
preserve your data folder upon installing a new version. And this means
that your data will be sustained, but added to it the newly entries in the
new version.</li>
</ul>
<p>And that's it, hope to search for good and find it, happy searching!</p>
<h3>Changes for 2.5.3</h3>
<ul>
<li>Add DeepL translator to available engines.</li>
<li>Add two combo boxes in setting panel, to choose target language for Google
translate and DeepL translator.</li>
</ul>
<h3>Changes for 2.3</h3>
<ul>
<li>Now choosing to preserve data from setting panel, does not means that you
will not get the new data entries, but the new entries in the new version,
will be merged and added to your old data file.</li>
<li>Update last tested version to 2023.1 to comply with NVDA version 2023.1.</li>
</ul>
<h3>Changes for 2.0</h3>
<ul>
<li>Disable the addon in secure mode.</li>
<li>Update last tested version to 2022.1, to comply with recent addon api
version.</li>
</ul>
<h3>Changes for 1.8</h3>
<ul>
<li>Add a check box in setting panel, to let advanced users preserve their
data folder.</li>
<li>Add two new entries in input gestures:
<ul>
<li>trigger search menu for clipboard text, press twice searches Google
directly.</li>
<li>Trigger search menu for last spoken text, press twice searches Google
directly.</li>
</ul>
</li>
</ul>
<h3>Changes for 1.7</h3>
<ul>
<li>Make a combo box in addon's setting, to choose an option for default query
in search with dialog.</li>
<li>You can select either Leave blank, Use clipboard text, or Use last spoken
text.</li>
</ul>
<h3>Changes for 1.2</h3>
<ul>
<li>Add more sites that could be added to menu, such as Stackoverflow,
Stackexchange, GoogleBooks and others.</li>
<li>Add the options to use last spoken text as default query, in search with
dialog.</li>
</ul>
<h3>Changes for 0.4</h3>
<ul>
<li>Add a dialog if no text selected, to enter a search query.</li>
<li>Make possible to modify Search with menu from setting panel, to fit to
user needs.</li>
</ul>
<h3>Changes for 0.3</h3>
<ul>
<li>Add setting panel, giving more language options in Google search.</li>
</ul>
<h3>Changes for 0.1</h3>
<ul>
<li>Initial version</li>
</ul>
Say Product Name and Versionhttp://addons.nvda-project.org/addons/sayProductNameAndVersion.sk.html2024-03-20T01:25:51Z2021-08-05T12:29:53Z
<ul>
<li>Author: Luke Davis <a href="mailto:XLTechie@newanswertech.com">XLTechie@newanswertech.com</a>, Patrick ZAJDA
<a href="mailto:patrick@zajda.fr">patrick@zajda.fr</a></li>
<li>NVDA compatibility: 2017.3 through 2024.X</li>
<li>Download <a>stable version</a></li>
</ul>
<p>This <a href="https://nvaccess.org/">NVDA</a> add-on adds a shortcut to announce
product name and version of the foreground application, or copies this
information to the clipboard.</p>
<ul>
<li>Shortcut: <code>NVDA+shift+v</code></li>
<li>Press it twice to copy product name and version to the clipboard.</li>
<li>Press it three times to copy only the version to the clipboard.</li>
</ul>
<p>This shortcut may be remapped in the Tools category of NVDA's Input
Gestures.</p>
<p>If you like this add-on and are willing to help others decide whether it is
useful, please leave a <a href="https://github.com/nvaccess/addon-datastore/discussions/2683">review</a>.</p>
<p>For change history, please read the <a>changelog</a>.</p>
<h3>Tips</h3>
<ul>
<li>To find out the Windows version with this add-on, you can focus on any
Windows component (such as desktop, the start menu, the run dialog, etc.),
and press the shortcut key. Note, that this does not give you the release
version name, such as "23H3". Instead it gives you something closer to the
build version, as you would get from the second line of the "<code>winver</code>"
command.</li>
<li>To get the NVDA version, open any NVDA dialog or menu, and press this
add-on's shortcut key. For example, press <code>NVDA+n</code> to open the NVDA menu,
then press <code>NVDA+shift+v</code>, then press <code>escape</code> to leave the menu.</li>
</ul>
<p>https://www.nvaccess.org/addonStore/legacy?file=sayProductNameAndVersion</p>
<p>https://github.com/opensourcesys/sayProductNameAndVersion/blob/master/changelog.md#readme</p>
Event Trackerhttp://addons.nvda-project.org/addons/evtTracker.sk.html2024-03-22T17:52:59Z2021-07-21T09:20:37Z
<h1>Event Tracker</h1>
<ul>
<li>Author: Joseph Lee, Thiago Seus</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=evtTracker">stable version</a></li>
<li>NVDA compatibility: 2022.4 and later</li>
</ul>
<p>This add-on outputs information about objects for which events were
fired. Properties recorded in debug log mode include object type, name,
role, event, app module, and accessibility API specific information such as
accName for IAccessible object and Automation Id for UIA objects.</p>
<p>Notes:</p>
<ul>
<li>This add-on is designed for developers and power users needing to track
events coming from apps and various controls.</li>
<li>In order to use the add-on, NVDA must be logging in debug mode (configured
from general settings/logging level, or restart with debug logging
enabled).</li>
<li>It might be possible that add-ons loaded earlier than Event Tracker may
not pass on the event to other add-ons, including Event Tracker. If this
happens, Event Tracker will not be able to log events.</li>
<li>Events are handled from global plugins, app modules, tree interceptors,
and NVDA objects, in that order.</li>
</ul>
<h2>Events and their information</h2>
<p>The following events are tracked and recorded:</p>
<ul>
<li>Focus manipulation: gain focus, lose focus, focus entered, foreground</li>
<li>Changes: name, value, state, description, live region</li>
<li>Other events: alert</li>
<li>UIA events: controller for, drag drop and drop target effects, element
selected, item status, layout invalidated, notification, system alert,
text change, tooltip open, window open</li>
</ul>
<p>For each event, the following information will be recorded:</p>
<ul>
<li>Event name</li>
<li>Object</li>
<li>Object name</li>
<li>Object role</li>
<li>Object value or state depending on events</li>
<li>App module</li>
<li>For IAccessible objects: acc name, child ID</li>
<li>For UIA objects: Automation Id, class name, notification properties if
recording notification event information, child count for layout
invalidated event, properties for item status, drag drop, and drop target
effect if defined</li>
</ul>
<p>You can also assign a gesture to view the events on a list (NVDA
menu/Preferences/Input gestures, Event Tracker category). The list saves up
to 100 latest events processed.</p>
<p>If you find this add-on useful, please <a href="https://github.com/nvaccess/addon-datastore/discussions/2717">review it</a> in the NVDA Add-on
Store.</p>
<h2>Version 24.1.0</h2>
<ul>
<li>NVDA 2024.1 compatibility.</li>
</ul>
<h2>Version 23.02</h2>
<ul>
<li>NVDA 2022.4 or later is required.</li>
<li>Windows 10 21H2 (November 2021 Update/build 19044) or later is required.</li>
<li>Alert event (mostly for IAccessible objects) will be tracked.</li>
</ul>
<h2>Version 23.01</h2>
<ul>
<li>NVDA 2022.3 or later is required.</li>
<li>Windows 10 or later is required as Windows 7, 8, and 8.1 are no longer
supported by Microsoft as of January 2023.</li>
</ul>
<h2>Version 22.12</h2>
<ul>
<li>Added events list dialog (command unassigned) to list up to 100 recent
events recorded by the add-on (Thiago Seus).</li>
<li>Additional event information such as UIA notification properties are
recorded at the same time as events.</li>
</ul>
<h2>Version 22.10</h2>
<ul>
<li>NVDA 2022.2 or later is required due to security.</li>
<li>The following UIA property changes are tracked: drag drop effect, drop
target effect.</li>
<li>UIA item status property text is logged.</li>
<li>NVDA will no longer play error tones or appear to do nothing if an object
does not define a window class name.</li>
</ul>
<h2>Version 22.06</h2>
<ul>
<li>NVDA 2021.3 or later is required due to security.</li>
</ul>
<h2>Version 21.10</h2>
<ul>
<li>NVDA 2021.2 or later is required due to changes to NVDA that affects this
add-on.</li>
<li>UIA layout invalidated event will be tracked.</li>
<li>Object role and states information will resemble developer info found in
more recent NVDA releases.</li>
</ul>
<h2>Version 21.07</h2>
<ul>
<li>Initial release.</li>
</ul>
Emulátor braillovskej klávesniceprehttp://addons.nvda-project.org/addons/pcKbBrl.sk.html2024-02-13T14:35:52Z2021-07-08T20:09:59Z
<ul>
<li>Author: NV Access Limited, Noelia Ruiz Martínez</li>
<li>Copyright: 2012-2023 NV Access Limited, Noelia Ruiz Martínez</li>
<li>Licencia: GNU General Public License verzia 2.0</li>
<li><a href="https://www.nvaccess.org/addonStore/legacy?file=pckbbrl-o">verzia 2014.1</a> (pre nvda 2017.3 až 2019.2)</li>
</ul>
<p>Tento doplnok umožňuje písať na klávesnici počítača tak, ako by ste písali
na pichtovom stroji. (Poznámka prekladateľa: Oficiálne sa neuvádza podpora
pre slovenské rozloženia klávesnice, ale pri testovaní sa ukázalo, že nie je
nutné prepínať na anglické rozloženie. Písanie funguje správne aj vtedy, ak
ponecháte aktívne Slovenské rozloženie). Doplnok oficiálne podporuje tieto
rozloženia klávesnice:</p>
<ul>
<li>Anglické qwerty.</li>
<li>Francúzske (Francúzsko).</li>
<li>Nemecké (Nemecko).</li>
<li>Talianske (taliansko).</li>
<li>Perzština.</li>
<li>Portugalčina (Portugalsko\v).</li>
<li>Španielčina (Španielčina a Mexiko).</li>
<li>Turečtina.</li>
</ul>
<h2>Ako to funguje</h2>
<p>Nastavenia doplnku nájdete v príslušnej vetve v strome s nastaveniami. V
dialógu klávesové skratky môžete nastaviť skratku na vyvolanie nastavení
doplnku.</p>
<p>Ak chcete písať len jednou rukou, začiarknite príslušné políčko. Uistite sa,
že nie je začiarknuté, ak písanie nefunguje správne.</p>
<p>You can also select if NVDA should speak a single typed dot (using )the
feature of "one hand mode").</p>
<p>If you want dots to be sent automatically when typing with one hand, use the
spin control to set a timeout greater than 0.</p>
<p>In addition, you can set the characters to send, clear and compose dots when
typing with one hand, as well as characters to be ignored in one hand or
standard mode.</p>
<p>It's also possible to restore defaults in the add-on settings panel.</p>
<h2>Ako to funguje</h2>
<ol>
<li>Písanie v Braillovom písme aktivujete skratkou nvda+0. Skratku môžete
zmeniť v dialógu klávesové skratky.</li>
<li><p>Následne zadávajte znaky v Braillovom písme, pričom na písanie použite
príslušné kombinácie na klávesnici.</p>
<ul>
<li><p>Pre obojručné písanie použite nasledujúce klávesy na anglickej
klávesnici, resp. klávesy, ktoré sa nachádzajú na tom istom mieste v
iných rozloženiach:</p>
<ul>
<li>Body 1, 2, 3 píšeme klávesmi f, d, s.</li>
<li>Body 4, 5, 6 píšeme bodmi j, k, l.</li>
<li>Bod 7 napíšeme klávesom A, bod 8 klávesom ô ; (bodkočiarka).</li>
<li>Môžete použiť aj klávesy o rad vyššie, teda q, w, e, r, u, i, o a p.</li>
</ul>
</li>
<li><p>Ak chcete písať jednou rukou, môžete body zadávať postupne alebo
naraz. Zadanie potvrdíte klávesom G alebo H. Ak sa pomýlite, písanie
znaku zrušíte klávesom y alebo t. Na písanie sa v anglickom rozložení
používajú tieto znaky:</p>
<ul>
<li>Ľavá ruka: Body 1, 2, 3 píšeme klávesmi f, d, s. Body 4, 5, 6 klávesmi
r, e, w. Body 7 a 8 klávesmi a, q.</li>
<li>Pravá ruka: Body 1, 2, 3 píšeme klávesmi j, k, l. Body 4, 5, 6 klávesmi
u, i, o. Body 7 a 8 klávesmi ; (bodkočiarka), p.</li>
</ul>
</li>
</ul>
</li>
<li><p>Ostatné klávesi (enter, backspace, medzera a funkčné klávesy) fungujú
štandardne. Upozorňujeme, že prípadné náhodné stlačenie kombinácie
alt+shift môže zmeniť rozloženie klávesnice a následne negatívne
ovplyvniť nasledujúce napísané znaky.</p></li>
<li>Press space bar in combination with braille dots to move the system
cursor (or report the current line), just if you were using a braille
display. For example, space+dot1 to emulate upArrow, space+dot4+dot5+dot6
to emulate control+end, space+dot1+dot4 to report the current line, etc.</li>
<li>Písanie brailovských znakov deaktivujete skratkou nvda+0.</li>
</ol>
<h2>Dôležité</h2>
<p>Tento doplnok využíva vstavané písanie cez brailovské riadky, integrované v
NVDA. Preto je aj v tomto prípade použitá vstupná tabuľka, ktorú nastavíte v
nastaveniach brailu.</p>
<p>Niektoré klávesnice, najčastejšie na notebookoch, nedokážu spracovať
niektoré klávesové kombinácie. V takom prípade sú niektoré znaky jednoducho
ignorované, keďže sa nedostanú k operačnému systému ani NVDA. Môžete skúsiť
použiť iný rád kláves alebo rady kombinovať. (Poznámka prekladateľa:
Odporúčam použiť externú klávesnicu).</p>
<h2>Changes for 28.0.0</h2>
<ul>
<li>Changed default values for One hand mode.</li>
</ul>
<h2>Changes for 2023.02.23</h2>
<ul>
<li>Added ability to configure keys used to type dots in one hand mode.</li>
<li>Now you can configure keys that should be ignored when typing in braille.</li>
<li>A restore to defaults button has been added to the add-on settings panel.</li>
<li>Compatible with NVDA 2023.1.</li>
</ul>
<h2>Changes for 2022.1</h2>
<ul>
<li>Added ability to configure keys to send and clear dots when writing with
one hand. Also, it's possible to set a timeout to send dots automatically,
without pressing confirmation keys.</li>
</ul>
<h2>Changes for 2021.1</h2>
<ul>
<li>NVDA won't try to speak dots when One hand mode is not active or if space
has been pressed.</li>
<li>Compatible with NVDA 2021.1.</li>
</ul>
<h2>Changes for 2020.1</h2>
<ul>
<li>You can press space bar in combination with braille dots to emulate
gestures, similar to commands available in braille displays.</li>
<li>Added an option to speak single dots typed in one hand mode.</li>
</ul>
<h2>Ďalší vývojári</h2>
<ul>
<li>James Teh</li>
<li>Noelia.</li>
<li>Mohammadreza Rashad</li>
<li>Cagri Dogan</li>
<li>Bernd Dorer</li>
<li>Ângelo Abrantes</li>
<li>Cyrille Bougot</li>
<li>Abdel.</li>
</ul>
Zlepšená prístupnosť pre Zväčšovacie sklo Windowshttp://addons.nvda-project.org/addons/winMag.sk.html2024-02-15T21:52:02Z2021-07-08T08:49:47Z
<ul>
<li>Autor: Cyrille Bougot</li>
<li>NVDA compatibility: 2019.2.1 and beyond</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=winmag">stable version</a></li>
</ul>
<p>This add-on improves the use of Windows Magnifier with NVDA.</p>
<h2>Vlastnosti</h2>
<ul>
<li>Allows to report the result of some native Magnifier keyboard commands.</li>
<li>Allows to reduce the cases where table navigation commands conflict with
Magnifier's commands.</li>
<li>Adds some keyboard shortcuts to toggle various native options of the
Magnifier.</li>
<li>Allow to save and restore the configuration parameters of the Magnifier.</li>
<li>Adds some extra features that are not provided by Windows Magnifier (mouse
to view, Magnifier window not on top)</li>
</ul>
<h2>Settings</h2>
<p>The setting panel of Windows Magnifier add-on allows to configure how NVDA
reacts to native Windows Magnifier commands. You may want to have more or
less commands reported according to what you are able to see. The panel
also contains an option to modify the behaviour of Windows Magnifier control
window.</p>
<p>This panel may be opened choosing Preferences -> Settings in the NVDA menu and then selecting the Windows Magnifier category in the Settings window.
The keyboard shortcut NVDA+Windows+O then O also allows to open this settings panel directly.</p>
<p>The panel contains the following options:</p>
<ul>
<li><p>Report view moves: controls what is reported when you move the view with
Control+Alt+Arrows commands. The three options are:</p>
<ul>
<li>Off: Nothing is reported.</li>
<li>With speech: a speech message indicates the position of the zoomed
view on the dimension the view is being moved.</li>
<li>With tones: a tone is played and its pitch indicates the position of
the zoomed view on the dimension the view is being moved.</li>
</ul>
<p>This option does not affect docked view mode.</p></li>
<li><p>Report screen edges: controls what is reported when you reach the edges of
the screen while moving the view with Control+Alt+Arrows commands. The
three options are: Off, With speech and With tones. This option does not
affect docked view mode.</p></li>
<li>Volume of the tones reporting the position of the view: allows to define
the volume of the tones if you have selected to report view moves or
screen edges with tones.</li>
<li>Report turn on or off: If checked, the Magnifier's state is reported when
you use Windows++ or Windows+Escape commands to turn it on or off.</li>
<li>Report zoom: If checked, the Magnifier's zoom level is reported when you
use Windows++ or Windows+- zoom commands.</li>
<li>Report color inversion: If checked, the color inversion state is reported
when you use the control+Alt+I toggle command.</li>
<li>Report view change: If checked, the view type is reported when you use a
command that changes the view type (Control+Alt+M, Control+Alt+F,
Control+Alt+D, Control+Alt+L)</li>
<li>Report lens or docked window resizing: If checked, a message is reported
when you use the resizing commands (Alt+Shift+Arrows). In docked window
mode, the height or the width is reported. In lens mode, the new
dimension cannot be reported for now. These resizing command do not seem
to be available on all versions of Windows; if your Windows version does
not support them, you should keep this option unchecked.</li>
<li><p>In documents and list views, pass control+alt+arrows shortcuts to Windows
Magnifier: There are three possible choices:</p>
<ul>
<li>Never: The command is not passed to Windows Magnifier and standard
NVDA table navigation can operate. When used in documents out of a
table, the Control+Alt+Arrow command reports a "Not in a table" error
message. This is the standard behaviour of NVDA without this add-on.
You can still use NVDA+Windows+O then arrows to move the magnified
view.</li>
<li>Only when not in table: In table or in list views, Control+Alt+Arrow
commands perform standard table navigation. When used in documents
out of a table, Control+Alt+Arrow commands perform standard Magnifier
view move commands. If you still want to move Windows Magnifier view
while in table or in list view, you will need to press NVDA+F2 before
using Control+Alt+Arrow commands or alternately use NVDA+Windows+O
then arrows. This option is the best compromise if you want to use
Control+Alt+Arrow for both Magnifier and table navigation.</li>
<li>Always: Control+Alt+Arrow commands moves the Magnifier's view in any
case. This option may be useful if you do not use Control+Alt+Arrow
to navigate in table, e.g. because you have changed table navigation
shortcuts in NVDA or because you exclusively use <a href="https://addons.nvda-project.org/addons/easyTableNavigator.en.html">Easy table
navigator</a> add-on for table navigation.</li>
</ul>
</li>
<li><p>Keep Windows Magnifier command window always on top: If unchecked, the
Magnifier's control window will not be kept always on top of other
windows.</p></li>
</ul>
<h2>Pridané klávesové skratky</h2>
<p>In addition to native Magnifier commands, this add-on provide additional
commands:</p>
<ul>
<li>Commands that allow to control Magnifier's options without opening its
configuration page.</li>
<li>Extra commands specific to this add-on.</li>
</ul>
<p>All these additional commands are accessible through the Magnifier layer
command NVDA+Windows+O:</p>
<ul>
<li>NVDA+Windows+O nasledované písmenom C: Prepína sledovanie systémového
kurzora.</li>
<li>NVDA+Windows+O nasledované písmenom F: Prepínanie sledovanie fokusu.</li>
<li>NVDA+Windows+O nasledované písmenom m: Prepína sledovanie kurzora myši.</li>
<li>NVDA+Windows+O then T: Toggles on or off tracking globally. When tracking
is toggled on again, it is set to the last active tracking configuration
before tracking was toggled off.</li>
<li>NVDA+Windows+O nasledované písmenom S: zapína a vypína vyhladzovanie
písma.</li>
<li>NVDA+Windows+O then R: Switches between mouse pointer tracking modes
(within the edge of the screen or centered on the screen); this feature is
only available on Windows 10 build 17643 or higher.</li>
<li>NVDA+Windows+O then X: Switches between text cursor tracking modes (within
the edge of the screen or centered on the screen); this feature is only
available on Windows 10 build 18894 or higher.</li>
<li>NVDA+Windows+O then shift+P: Saves the current configuration parameters of
the magnifier to NVDA's configuration.</li>
<li>NVDA+Windows+O then P: Restores the current configuration parameters of
the magnifier from NVDA's configuration. If no configuration parameters
has been previously saved to NVDA's configuration, the default
configuration parameters of Windows Magnifier are restored instead.</li>
<li>NVDA+Windows+O then Arrows: Move the magnified view.</li>
<li>NVDA+Windows+O then V: Moves the mouse cursor in the center of the
magnified view (command not available in docked view mode).</li>
<li>NVDA+Windows+O then W: Switches on or off the mode allowing to keep
Windows Magnifier's control window always on top of the other ones. This
feature is only available for installed versions of NVDA.</li>
<li>NVDA+Windows+O then O: Opens Windows Magnifier add-on settings.</li>
<li>NVDA+Windows+O nasledované písmenom H: Oznámi klávesové skratky doplnku.</li>
</ul>
<p>There is no default direct gesture for each command, but you can attribute
one normally in the input gesture dialog if you wish. The same way, You can
also modify or delete the Magnifier layer access gesture (NVDA+Windows+O).
Yet, you cannot modify the shortcut key of the Magnifier layer sub-commands.</p>
<h2>Predvolené skratky zväčšovacieho skla</h2>
<p>The result of the following Magnifier native commands may be reported by
this add-on, according to its configuration:</p>
<ul>
<li>Spustiť zväčšovacie sklo: Windows++</li>
<li>Ukončiť zväčšovacie sklo: Windows+Escape</li>
<li>Priblížiť: Windows++</li>
<li>Oddialiť: Windows+-</li>
<li>Prepnúť inverziu farieb: Ctrl+Alt+I</li>
<li>Ukotvené zobrazenie: Ctrl+alt+d</li>
<li>Zobrazenie na celú obrazovku: ctrl+alt+f</li>
<li>Zobrazenie lupa: ctrl+alt+l</li>
<li>Prepnúť režim zobrazenia: ctrl+alt+m</li>
<li>Resize the lens with the keyboard: Shift+Alt+Left/Right/Up/DownArrow Note:
although this does not seem to be documented, this shortcut seems to have
been withdrawn in recent Windows versions such as Windows 10 2004.</li>
<li>Move the magnified view: Control+Alt+Arrows</li>
</ul>
<p>Here is also a list of other Magnifier native commands, just for
information:</p>
<ul>
<li>Ctrl+alt+koliesko myši: Približuje a odďaľuje zobrazenie.</li>
<li>Ctrl+windows+m: Otvorí nastavenia zväčšovacieho skla.</li>
<li>Ctrl+alt+r: upraví veľkosť lupi podľa kurzora myši.</li>
<li>Ctrl+alt+medzera: V zobrazení na celú obrazovku okamžite zobrazí pracovnú
plochu.</li>
</ul>
<p>Tieto skratky nie je možné zmeniť.</p>
<h2>Poznámky</h2>
<ul>
<li>For computers equipped with an Intel graphic card, control+alt+arrow
(left/right/up/down) are also shortcuts to modify the orientation of the
screen. These shortcut are enabled by default and conflict with Windows
Magnifiers shortcuts to move the view. You will need to disable them to
be able to use them for the Magnifier. They can be disabled in the Intel
control panel or in the Intel menu present in the system tray.</li>
<li><p>Depending on your Windows version, Alt+Shift+Arrow are Windows Magnifier
shortcuts to resize the magnified view (lens or docked). When Magnifier
is active (even in full screen mode), these shortcuts are captured by
Magnifier and cannot be passed to the application, even if you press
NVDA+F2 before. To use these shortcuts in the current application, you
need to quit the Magnifier (Windows+Escape) and re-open it after
(Windows++). For example in MS word, to decrease title level:</p>
<ul>
<li>Skratkou Windows+escape ukončite zväčšovacie sklo.</li>
<li>Skratkou alt+shift+pravá šípka upravte úroveň nadpisu.</li>
<li>Opätovne spustite zväčšovacie sklo Windows++.</li>
</ul>
</li>
<li><p>Podrobnosti o zväčšovacom skle si pozrite na týchto stránkach:</p>
<ul>
<li><a href="https://support.microsoft.com/en-us/help/11542/windows-use-magnifier-to-make-things-easier-to-see">Use Magnifier to make things on the screen easier to
see</a></li>
<li><a href="https://support.microsoft.com/en-us/help/13810">Windows keyboard shortcuts for accessibility</a></li>
</ul>
</li>
<li><p>This add-on has not been tested in multi-screen environment and there are
chances that some feature are not working in this environment. If you are
using multi-screen environment and want it to be supported, please contact
me to have it implemented.</p></li>
<li>More generally, do not hesitate to contact me on the <a href="https://github.com/CyrilleB79/winMag">GitHub page</a> of
this add-on or directly by e-mail.</li>
</ul>
<h2>Zoznam zmien</h2>
<h3>Version 3.5</h3>
<ul>
<li>Prepares compatibility with NVDA 2024.1.</li>
<li>Addresses potential security issues related to <a>GHSA-xg6w-23rw-39r8</a>
when using the add-on with older versions of NVDA. However, it is
recommended to use NVDA 2023.3.3 or higher.</li>
<li>Note: From now on, translation updates will not appear anymore in the
change log.</li>
</ul>
<h3>Version 3.4</h3>
<ul>
<li>The "move mouse to view" command works again</li>
<li>Updated localizations.</li>
</ul>
<h3>Version 3.3</h3>
<ul>
<li>Compatibility reduced to NVDA 2019.2.1 and beyond. The last compatible
versions with NVDA 2018.3 are the <a>3.2</a> (partially compatible) and
<a>1.1</a> (fully compatible)</li>
<li>Fixed a bug in the settings panel with NVDA 2019.2.1.</li>
</ul>
<h3>Version 3.2</h3>
<ul>
<li>Removed the dev channel.</li>
<li>Updated localizations.</li>
</ul>
<h3>Version 3.1</h3>
<ul>
<li>Fixed an issue preventing the Magnifier's command window from being
restored on top.</li>
<li>Fixed an issue preventing the add-on to run on NVDA 2019.2.1.</li>
<li>Updated localizations.</li>
</ul>
<h3>Version 3.0</h3>
<ul>
<li>Pressing the zoom buttons in the Magnifier window (with the keyboard) now
reports the new zoom level.</li>
<li>The parameter controlling if Magnifier control window remains always on
top is now stored in configuration; this means that this parameter is
remembered when restarting NVDA and can be enabled or not depending on the
active profile.</li>
<li>Fixed a bug causing unexpected screen curtain de-activation when using
move to view or move view commands.</li>
<li>Option alwaysOnTop setting will now be honoured also when changing
magnification mode.</li>
<li>Added ability to save and restore Windows Magnifier's config in NVDA's
config.</li>
<li>Compatibility with NVDA 2023.1.</li>
<li>Clarify which type of tracking is re-enabled when tracking is toggled on
again.</li>
<li>Updated localizations.</li>
</ul>
<h3>Version 2.0</h3>
<ul>
<li>The view can be moved with arrows while in Windows Magnifier layer.</li>
<li>Capability to keep the Magnifier commands Window always on top or not.</li>
<li>Added "Report screen edges" feature.</li>
<li>Volume setting of tones when using move view commands.</li>
<li>Reporting view moves and mouse to view commands are now supported in Lens
mode.</li>
<li>Compatibility with NVDA 2022.1.</li>
<li>Fixed a bug that sometimes incorrectly reported that the Magnifier was not
working upon script call.</li>
<li>The release is now performed thanks to a GitHub action instead of
appVeyor.</li>
<li>Updated localizations.</li>
</ul>
<h3>Version 1.1</h3>
<ul>
<li>Added localizations.</li>
</ul>
<h3>Verzia 1.0</h3>
<ul>
<li>Prvé vydanie.</li>
</ul>
<p>https://github.com/CyrilleB79/winMag/releases/download/V1.1/winMag-1.1.nvda-addon</p>
<p>https://github.com/CyrilleB79/winMag/releases/download/V3.2/winMag-3.2.nvda-addon</p>
<p>https://github.com/nvaccess/nvda/security/advisories/GHSA-xg6w-23rw-39r8#event-132994</p>
Direct Linkhttp://addons.nvda-project.org/addons/directLink.sk.html2023-05-10T20:38:32Z2021-06-29T07:11:59Z
<ul>
<li>Author: Fawaz Abdul Rahman</li>
<li>Version: 1.0</li>
<li>NVDA compatibility: 2019.3 and beyond</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=directlink">stable version</a></li>
</ul>
<h2>Functionality</h2>
<p>The purpose of the addon is to convert the Dropbox, Google Drive or oneDrive
(both personal and business) links to a direct link, furthermore, it
generates a direct link to a WhatsApp chat with the chosen selected phone
number.</p>
<h2>Usage</h2>
<ul>
<li>Select or copy a shared Dropbox, Google Drive or oneDrive link</li>
<li>Press alt+NVDA+l to convert the link. The resulting URL will be in your
clipboard.</li>
<li>Similarly for the phone number, copy or select the number you like to chat
with or share and press the same shortcut (alt+NVDA+L).</li>
<li>if you like to open the resulted link in your browser, press
alt+NVDA+shift+l.</li>
</ul>
<h2>Why the direct link?</h2>
<p>A direct link will allow you to get the well-known save dialog box directly
if you open it in the browser, without being hassled by the hosting company
download page and locating the download link. Moreover, the direct link can
be used to stream a file or view a file in certain programs such as media
players (if coming with URL support). Likewise, if WhatsApp is common in
your country, rather than creating a new contact each time if you need to
chat with someone, weather it is a customer or technical support, you can
simply select the number or copy it and start chatting right away. Even
more, you can share the WhatsApp link of your own number if people usually
need to contact you in case you work as a freelancer.</p>
<h2>Notes</h2>
<ul>
<li>A link of a folder cannot be converted; the link has to be directing to a
file.</li>
<li>Make sure the link you are sharing is public (anyone with the link can
access) in order for it to be successfully converted.</li>
<li>You can change the hotkeys from the NVDA menu> preferences> input
gestures.</li>
<li>If you find a certain format of a phone number that is not detected, you
can email me with an example.</li>
<li>Certain type of files and sizes in Google Drive might take you to a page
that says "Google Drive can't scan this file for viruses." in that case,
you have to click on download anyway link.</li>
</ul>
<h2>Acknowledgements</h2>
<p>A huge thanks goes to the following friends, without them I couldn't have
made it happen:</p>
<ul>
<li>Qais Alrefai for testing the add-on and providing me with various material
to test with, and also for his observations and general idea for the
addon.</li>
<li>Marina Amir for translating the add-on to French, language editing and
testing.</li>
<li>Riad Assoum for translating the add-on to Arabic.</li>
<li>all testers.</li>
</ul>
NVDA Unmutehttp://addons.nvda-project.org/addons/unmute.sk.html2023-05-10T20:38:32Z2021-06-08T03:54:01Z
<ul>
<li>Author: Oleksandr Gryshchenko</li>
<li>Version: 1.5</li>
<li>NVDA compatibility: 2019.3 and beyond</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=unmute">stable version</a></li>
</ul>
<p>This add-on checks the status of the Windows audio system when NVDA
starts. And, if it turns out that the sound is muted - the add-on forcibly
turns it on.</p>
<p>At the same time, the volume level is checked separately for the NVDA
process.</p>
<p>The add-on also checks the status of the speech synthesizer. If there are
problems with its initialization, attempts are made to start the
synthesizer, which is specified in the NVDA settings.</p>
<p>There is an additional opportunity to check on which audio device the NVDA
sound is output. And, if this device differs from the default device, the
output automatically switches to the audio device installed in the system as
the main one.</p>
<p>Note: If the add-on startup sound always plays even if the NVDA volume is
online. That is, the add-on switches the output to the main audio device
each time you start NVDA.</p>
<p>This occurs when the audio output device is in the NVDA settings is differ
from the default output device or "Microsoft Sound Mapper".</p>
<p>This can be easily solved in one of the following ways:</p>
<ol>
<li>After restarting NVDA, just save the current configuration using
NVDA+Ctrl+C. The default audio device will be saved in the NVDA settings
and switching will not occur each time when NVDA starts.</li>
<li>If you don't want to change the NVDA configuration - just disable the
function of switching audio devices in the Unmute settings panel.</li>
</ol>
<h2>Add-on settings dialog</h2>
<p>To open the add-on settings panel, follow these steps:</p>
<ul>
<li>Press NVDA+N to open NVDA menu.</li>
<li>Then go to "Preferences" -> "Settings..." and in the categories list find
and open "Unmute Windows Audio".</li>
</ul>
<p>That's it, you can now use the Tab key to move between add-on settings.</p>
<p>The following options are available in the add-on settings dialog:</p>
<ol>
<li><p>The first slider in the add-on settings dialog allows you to specify the
volume level of Windows, which will be set when you start NVDA if the
sound was previously muted or was too low.</p></li>
<li><p>The minimum Windows volume level at which the volume up procedure will be
applied. This slider allows you to adjust the sensitivity level of the
add-on.</p>
<p> If the volume level drops to less than the value specified here, the volume will be increased the next time you start NVDA.</p>
<p> Otherwise, if the volume level remains higher than the value specified here, then when you restart NVDA, its level will not change.</p>
<p> And, of course, if the sound was previously turned off, when restarts add-on will turn it on anyway.</p></li>
<li><p>The following check box allows to enable re-initialization of the voice
synthesizer driver.</p>
<p> This procedure will only start if it is detected at NVDA startup that the voice synthesizer driver has not been initialized.</p></li>
<li><p>In this field you can specify the number of attempts to re-initialize the
voice synthesizer driver. Attempts are performed cyclically with an
interval of 1 second. A value of 0 means that attempts will be performed
indefinitely until the procedure is successfully completed.</p></li>
<li><p>The "Switch to the default output audio device" option allows to check at
startup the audio device on which NVDA sound is output. And, if this
device differs from the default device, the output automatically switches
to the audio device installed in the system as the main one.</p></li>
<li><p>The next checkbox turns on or off playing the startup sound when the
operation is successful.</p></li>
</ol>
<h2>Third Party components</h2>
<p>The add-on uses the following third-party components:</p>
<ul>
<li>For interaction with the <strong>Windows Core Audio API</strong> - <a href="https://github.com/AndreMiras/pycaw/">PyCaw
module</a> that is distributed under
the MIT license.</li>
<li>For getting the information about running processes and using the PyCaw
component - <a href="https://github.com/giampaolo/psutil">psutil module</a> that is
distributed under BSD-3 license.</li>
</ul>
<h2>Change log</h2>
<h3>Version 1.5.5</h3>
<ul>
<li>the add-on has been tested for compatibility with NVDA 2021.1;</li>
<li>updated third-party module <strong>psutil</strong>;</li>
<li>the add-on is adapted to support Python versions 3.7 and 3.8;</li>
<li>MyPy type annotations added to the add-on source code;</li>
<li>added "Switch to the default output audio device" feature;</li>
<li>the add-on parameters are always stored in the base configuration profile.</li>
</ul>
<h3>Version 1.4</h3>
<ul>
<li>added a method to increase the startup volume separately for the NVDA
process;</li>
<li>changed the sound notification of a successful operation (thanks to
Manolo);</li>
<li>all manual volume control functions have been transferred to the NVDA
Volume Adjustment add-on.</li>
</ul>
<h3>Version 1.3</h3>
<ul>
<li>added the ability to control the volume of the main audio device and
separately for each running program;</li>
<li>updated translation into Vietnamese (thanks to Dang Manh Cuong);</li>
<li>added Turkish translation (thanks to Cagri Dogan);</li>
<li>Italian translation added (thanks to Christianlm);</li>
<li>added simplified Chinese translation (thanks to Cary Rowen);</li>
<li>Polish translation added (thanks to Stefan Banita);</li>
<li>updated Ukrainian translation;</li>
<li>updated ReadMe.</li>
</ul>
<h3>Version 1.2</h3>
<ul>
<li>switched to using the <strong>Core Audio Windows API</strong> instead of <strong>Windows
Sound Manager</strong>;</li>
<li>added startup sound playback when audio is successfully turned on by
add-on.</li>
</ul>
<h3>Version 1.1</h3>
<ul>
<li>added add-on settings dialog;</li>
<li>updated Ukrainian translation.</li>
</ul>
<h3>Version 1.0.1</h3>
<ul>
<li>Performs repeated attempts to enabling the synth driver in case of its
failed initialization;</li>
<li>Vietnamese translation added by Dang Manh Cuong;</li>
<li>Ukrainian translation added.</li>
</ul>
<h3>Version 1.0. Features of implementation</h3>
<p>The add-on uses a third-party module Windows Sound Manager.</p>
<h2>Altering of add-on source code</h2>
<p>You may clone this repo to make alteration to NVDA Unmute.</p>
<h3>Third Party dependencies</h3>
<p>These can be installed with pip:</p>
<ul>
<li>markdown</li>
<li>scons</li>
<li>python-gettext</li>
</ul>
<h3>To package the add-on for distribution</h3>
<ol>
<li>Open a command line, change to the root of this repo</li>
<li>Run the <strong>scons</strong> command. The created add-on, if there were no errors,
is placed in the current directory.</li>
</ol>
Check Input Gestureshttp://addons.nvda-project.org/addons/checkGestures.sk.html2023-05-19T22:38:50Z2021-05-26T17:24:18Z
<ul>
<li>Author: Oleksandr Gryshchenko</li>
<li>Version: 1.0</li>
<li>NVDA compatibility: 2019.3 and beyond</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=checkGestures">stable version</a></li>
</ul>
<p>Find and fix input gestures conflicts in NVDA and add-ons. The general term
"input gestures" includes keyboard commands, commands entered from Braille
keyboards and gestures of touch screens.</p>
<p>Each of the installed add-ons can make changes to the NVDA configuration by
adding or reassigning existing input gestures. If the same input gestures
are binded to several functions, it will be impossible to call some of them.</p>
<h2>Search for duplicate gestures</h2>
<p>To detect duplicate gestures, call the NVDA menu, go to the "Tools" submenu,
then - "Check Input Gestures" and activate the menu item "Search for
duplicate gestures...".</p>
<p>After that, all input gestures used in NVDA will be checked in the following
order:</p>
<ol>
<li>globalCommands;</li>
<li>globalPlugins.</li>
</ol>
<p>If the same input gestures will be detected, which are assigned to different
functions, their list will be displayed in a separate dialog box.</p>
<p>After pressing the Enter key on the selected list item, the corresponding
NVDA function will be selected and opened in the standard "Input
Gestures..." dialog, where you can delete or reassign the associated
gesture.</p>
<p>Note: As you know, features that don't have a text description do not appear
in the "Input Gestures..." dialog. Therefore, after activating such an
element, the corresponding warning will be displayed.</p>
<h2>Gestures without description</h2>
<p>To view the list of gestures binded with functions without a text
description, if they are found in your NVDA configuration, you need to call
the NVDA menu, go to the submenu "Tools", then - "Gestures without
description...".</p>
<p>Such features do not appear in the standard NVDA "Input Gestures..." dialog,
so it is not yet possible to delete or reassign associated gestures.</p>
<h2>Help</h2>
<p>One way to view this help page is to call up the NVDA menu, go to the
"Tools" submenu, then - "Check Input Gestures", and activate "Help".</p>
<p>Note: All features of the add-on are presented in the NVDA "Input Gestures"
dialog and you can assign your own keyboard shortcuts to each of them.</p>
<h2>Contributions</h2>
<p>We are very grateful to everyone who made the effort to develop, translate
and maintain this add-on:</p>
<ul>
<li>Wafiqtaher - Arabic translation;</li>
<li>Angelo Miguel Abrantes - Portuguese translation;</li>
<li>Cagri Dogan - Turkish translation.</li>
</ul>
<h2>Change log</h2>
<h3>Version 1.0</h3>
<ul>
<li>implemented search for duplicate input gestures;</li>
<li>implemented search for input gestures binded to functions without a text
description.</li>
</ul>
<h2>Altering of add-on source code</h2>
<p>You may clone this repo to make alteration to NVDA Check Input Gestures.</p>
<h3>Third Party dependencies</h3>
<p>These can be installed with pip:</p>
<ul>
<li>markdown</li>
<li>scons</li>
<li>python-gettext</li>
</ul>
<h3>To package the add-on for distribution</h3>
<ol>
<li>Open a command line, change to the root of this repo</li>
<li>Run the <strong>scons</strong> command. The created add-on, if there were no errors,
is placed in the current directory.</li>
</ol>
WordNavhttp://addons.nvda-project.org/addons/wordNav.sk.html2023-05-10T20:38:32Z2021-05-07T05:30:37Z
<ul>
<li>Author: Tony Malykh</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=wordnav">stable version</a></li>
<li>NVDA compatibility: 2019.3 and later</li>
</ul>
<p>WordNav NVDA add-on improves built-in navigation by word, as well as adds
extra word navigation commands with different definition for the word.</p>
<p>Most text editors support Control+LeftArrow/RightArrow commands for word
navigation. However the definition of the word changes from one program to
another. This is especially true of modern web-based text editors, such as
Monaco. NVDA should know the definition of word in given program in order to
speak words correctly. If NVDA doesn't know the exact definition, then
either words are going to be skipped, or pronounced multiple
times. Moreover, some web-based text editors position the cursor in the end
of the word, instead of the beginning, making editing much harder for
visually impaired users. In order to combat this problem I have created
enhanced word navigation commands, that take the word definition from
Notepad++ and they do not rely on program's definition of words, but rather
parse lines into words on NVDA's side. The Control+LeftArrow/RightArrow
gesture is not even sent to the program, thus ensuring the consistency of
the speech.</p>
<p>Please note that a prototype of WordNav was formerly a part of <a href="https://github.com/mltony/nvda-tonys-enhancements/">Tony's
enhancements</a>
add-on. Please either uninstall it or upgrade to <a href="https://github.com/mltony/nvda-tonys-enhancements/releases/latest/download/tonysEnhancements.nvda-addon">Tony's enhancements latest
stable
version</a>
to avoid conflicts.</p>
<p>Currently WordNav supports four definitions of the word, assigned to
different gestures:</p>
<ul>
<li><code>Left Control+Arrows</code>: Notepad++ definition, that treats alphanumeric
characters as words, and adjacent punctuation marks are also treated as
words. This should be the most convenient word definition for the majority
of users.</li>
<li><code>RightControl+Arrows</code>: Fine word definition splits <code>camelCaseIdentifiers</code>
and <code>underscore_separated_identifiers</code> into separate parts, thus allowing
the cursor to go into long identifiers.</li>
<li><code>LeftControl+Windows+Arrows</code>: Bulky word definition treats almost all
punctuation symbols adjacent to text as part of a single word, therefore
it would treat paths like <code>C:\directory\subdirectory\file.txt</code> as a single
word.</li>
<li><code>RightControl+Windows+Arros</code>: Multiword definition, that groups several
words together. The amount of words is configurable.</li>
</ul>
<p>Gestures can be customized in WordNav settings panel.</p>
<h2>Notes</h2>
<ul>
<li>At this time WordNav doesn't modify <code>Control+Shift+LeftArrow/RightArrow</code>
gestures to select words, since implementation of such commands are
significantly more complicated.</li>
<li>If you would like to use virtual desktops feature of Windows 10, please
remember to disable Control+Windows+Arrows keyboard shortcuts either in
WordNav Settings panel, or in NVDA Input gestures dialog.</li>
<li>WordNav doesn't work reliably in VSCode, since due to its internal
optimizations, VSCode presents only a few lines of file contents at a
time, that change dynamically, and this occasionally interferes with
WordNav algorithm.</li>
</ul>
Win Wizardhttp://addons.nvda-project.org/addons/winWizard.sk.html2024-03-23T16:52:33Z2021-04-28T11:10:21Z
<ul>
<li>Author: Oriol Gómez, Łukasz Golonka, current maintenance by Jakub Lukowicz</li>
<li>NVDA compatibility: 2019.3 and beyond</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=winwizard">stable version</a></li>
</ul>
<p>This add-on allows you to perform some operations on the focused window or
the process associated with it. When killing a process, or showing / hiding
a window a confirmation beep is played when the action succeeds. If you
find this annoying you can disable these beeps in the Win Wizard's settings
panel available from NVDA's settings dialog.</p>
<h2>Keyboard commands:</h2>
<p>All these commands can be remapped from the Input gestures dialog in the Win
Wizard category.</p>
<h3>Hiding and showing hidden windows:</h3>
<ul>
<li>NVDA+Windows+numbers from 1 to 0 - hides currently focused window in the
slot corresponding to the pressed number</li>
<li>NVDA+Windows+left arrow - moves to the previous stack of hidden windows.</li>
<li>NVDA+Windows+right arrow - moves to the next stack of hidden windows.</li>
<li>Windows+Shift+h - hides the currently focused window in the first
available slot</li>
<li>NVDA+Windows+h - shows the last hidden window</li>
<li>Windows+Shift+l - shows the list of all hidden windows grouped by the
stacks (please note that by default last hidden window is selected)</li>
</ul>
<h3>Managing processes:</h3>
<ul>
<li>Windows+F4 - kills the process associated with the currently focused
window</li>
<li>NVDA+Windows+p - opens dialog allowing you to set priority of the process
associated with the currently focused window</li>
</ul>
<h3>Miscellaneous commands:</h3>
<ul>
<li>NVDA+Windows+TAB - switches between top level windows of the current
program (useful in foobar2000, Back4Sure etc.)</li>
<li>CTRL+ALT+T - allows you to change title of the currently focused program</li>
</ul>
<h2>Changes:</h2>
<h3>Changes for 5.0.6:</h3>
<ul>
<li>Compatibility with NVDA 2024.1</li>
<li>Update translations</li>
</ul>
<h3>Changes for 5.0.5:</h3>
<ul>
<li>Compatibility with NVDA 2023.2</li>
<li>Update translations</li>
</ul>
<h3>Changes for 5.0.4:</h3>
<ul>
<li>Compatibility with NVDA 2022.1</li>
<li>It is now possible to disable confirmation beeps in the add-ons settings
panel</li>
<li>Update translations</li>
</ul>
<h3>Changes for 5.0.3:</h3>
<ul>
<li>Compatibility with NVDA 2021.1</li>
</ul>
<h3>Changes for 5.0.2:</h3>
<ul>
<li>First release available from the add-ons website</li>
</ul>
Console Toolkithttp://addons.nvda-project.org/addons/consoleToolkit.sk.html2024-02-13T14:35:33Z2021-04-28T11:09:48Z
<ul>
<li>Author: Tony Malykh</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=consoletoolkit">stable version</a></li>
<li>NVDA compatibility: 2019.3 and later</li>
</ul>
<p>Console Toolkit is NVDA add-on, that provides accessibility improvements for
Windows console, also known as Command prompt. It also works well in Windows
PowerShell. Some of the features may work in alternative terminals, such as
Cygwin, PuTTY and Windows Terminal, however, the add-on has only been
carefully tested with the default Windows Console. SSH users might find this
add-on especially handy.</p>
<p>Some of the features were previously part of <a href="https://github.com/mltony/nvda-tonys'enhancements/">Tony's enhancements
add-on</a>.</p>
<h2>Downloads</h2>
<p><a href="https://github.com/mltony/nvda-console-toolkit/releases/latest/download/consoleToolkit.nvda-addon">Console
toolkit</a></p>
<h2>Real-time console speech</h2>
<p>This option makes NVDA to speak new lines immediately as they appear in
console output, instead of queueing new speech utterances. For example, if
NVDA is busy speaking a line that appeared on the screen 1 minute ago, and
now a new line appears, this option will cancel speaking the old line and
start speaking the new line right away, thus providing a more real-time
feedback on what's happening in console window.</p>
<h2>Beep on console updates</h2>
<p>Beep a low pitch impulse every time console text is updated.</p>
<h2>Enforce Control+V in consoles</h2>
<p>This option makes Control+V shortcut to work inside <code>ssh</code> sessions.</p>
<h2>Experimental: command prompt editing</h2>
<p>Note: this feature is experimental. Please read this section carefully and
make sure you understand how it works before reporting issues.</p>
<p>Press <code>NVDA+E</code> to identify current prompt in console window and edit it in
an accessible "Edit prompt" window. After editing you can either press
<code>Escape</code> to update current command line, or <code>Enter</code> to update and
immediately execute command. Alternatively you can press <code>Alt+F4</code> to close
edit prompt window without updating command line.</p>
<p>This feature has been tested in Windows command prompt <code>cmd.exe</code> as well as
in bash shell over ssh connections, as well as in WSL and cygwin. It might
also work in alternative Unix shells, however it hasn't been tested.</p>
<p>Here is how add-on extracts current command.</p>
<ol>
<li>It presses <code>End</code> key and then sends a control character, that is a rare
Unicodecharacter not likely to be used anywhere.</li>
<li>Then it presses <code>home</code> key and sends another control character.</li>
<li>Then it waits for control characters to appear on the screen, which might
take some time on slow SSH connections.</li>
<li>Command is what appears between two control characters.</li>
<li>When "Use UI Automation to access the Windows Console when available"
option is enabled in NVDA settings, it sends one more control character
in the beginning of the string. This is needed to parse multiline
commands correctly: UIA implementation trims whitespaces in the end of
each line, so in order to deduce whether there is a space between two
lines, we need to shift them by one character. Please note, however, that
this way we don't preserve the number of spaces between words, we only
guarantee to preserve the presence of spaces.</li>
<li>Before editing add-on makes sure to remove control characters by placing
cursor in the beginning and end and simulating <code>Delete</code> and <code>Backspace</code>
key presses.</li>
<li>It presents command in "Edit prompt" window for user to view or edit.</li>
<li><p>After user presses <code>Enter</code> or <code>Escape</code>,it first erases current line in
the console. This is achieved via one of four methods, the choice of the
method is configurable. Currently four methods are supported:</p>
<ul>
<li><code>Control+C</code>: works in both <code>cmd.exe</code> and <code>bash</code>, but leaves previous
prompt visible on the screen; doesn't work in emacs; sometimes
unreliable on slow SSH connections</li>
<li><code>Escape</code>: works only in <code>cmd.exe</code>"),</li>
<li><code>Control+A Control+K</code>: works in <code>bash</code> and <code>emacs</code>; doesn't work in
<code>cmd.exe</code></li>
<li><code>Backspace</code> (recommended): works in all environments; however slower
and may cause corruption if the length of the line has changed</li>
</ul>
</li>
<li><p>Then add-on simulates keystrokes to type the updated command and
optionally simulates <code>Enter</code> key press.</p></li>
</ol>
<p>Troubleshooting:</p>
<ul>
<li>Verify that 'Home', 'End', 'Delete' and 'Backspace' keys work as expected
in your console.</li>
<li>Verify that your console supports Unicode characters. Some ssh connections
don't support Unicode.</li>
<li>Verify that selected deleting method works in your console.</li>
</ul>
<h2>Experimental: capturing command output</h2>
<p>Note: this feature is experimental. Please read this section carefully and
make sure you understand how it works before reporting issues.</p>
<p>While in command line or in "Edit prompt" window, press <code>Control+Enter</code> to
capture command output. This add-on is capable of capturing large output
that spans multiple screens, although when output is larger than 10 screens
capturing process takes significant time to complete. Add-on will play a
long chime sound, and it will last as long as the add-on is capturing the
output of currently running command, or until timeout has been
reached. Alternatively, press <code>NVDA+E</code> to interrupt capturing.</p>
<p>When "Use UI Automation to access the Windows Console when available"
feature is enabled in NVDA settings, you can switch to other windows while
capturing is going on. However, if this option is disabled, then NVDA is
using a legacy console code, that only works when consoel is focused, and
therefore switching to any other window will pause capturing.</p>
<p>Command capturing works by redirecting command output to <code>less</code>
command. Default suffix that is appended to commands is:
<code>
|less -c 2>&1
</code>
Please only change it if you know what you're doing. This add-on knows how
to interact with the output of <code>less</code> command to retrieve output page by
page.</p>
<p>On Windows <code>less.exe</code> tool needs to be installed separately. You can install
it via cygwin, or download a windows binary elsewhere.</p>
<p>If you are using <code>tmux</code> or <code>screen</code> in Linux, please make sure that no
status line is displayed in the bottom. In <code>tmux</code> run
<code>
tmux set status off
</code>
to get rid of status line, or modify your <code>tmux.conf</code> file.</p>
<p>Troubleshooting:</p>
<ul>
<li>After a failed output capturing attempt, press <code>UpArrow</code> in the console to
check what command has actually been executed.</li>
<li>Revert back to default capturing suffix, mentioned above.</li>
<li>Try troubleshooting steps from "command prompt editing" section.</li>
</ul>
Quick Dictionaryhttp://addons.nvda-project.org/addons/quickDictionary.sk.html2023-05-10T20:38:33Z2020-12-22T04:09:33Z
<ul>
<li>Author: Oleksandr Gryshchenko</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=quickdictionary">stable version</a></li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=quickdictionary-dev">development version</a></li>
<li>NVDA compatibility: 2019.3 to 2020.3</li>
</ul>
<p>Welcome to NVDA Quick Dictionary addon, which will allow you to quickly get
a dictionary article with the translation of a word or phrase into your
chosen language by pressing a key combination. There are few basic keyboard
shortcuts and they are all intuitive and convenient so you will remember
them quickly.</p>
<p>Dictionary articles contain detailed information about a word, such as part
of speech, gender, plural or singular, translation options, list of
meanings, synonyms and detailed examples. Such information will be useful
for people who are learning foreign languages, or seek to use in
communication all the richness and diversity of their own language.</p>
<p>The add-on supports several online dictionary services. You can select the
desired remote dictionary in the appropriate dialog box or by using keyboard
shortcuts. Each available service has its own settings panel.</p>
<p>There are also advanced opportunities for working with profiles of the voice
synthesizers. You can associate a voice synthesizer profile with a specific
language, after that translations into this language will be automatically
voiced by the selected synthesizer.</p>
<p>Below are all the features of the add-on and keyboard shortcuts to control them. By default all functions are called using two-layer commands. But for any of these methods you can always assign convenient for you keyboard shortcuts. You can do it in the NVDA "Preferences" -> "Input gestures..." dialog.</p>
<h2>Receiving a dictionary article</h2>
<p>In order to get an article from the dictionary, you must first select the
word you are interested in or copy it to the clipboard. Then just press
NVDA+Y twice. There is also another way to get a dictionary entry: pressing
NVDA+Y once switches the keyboard to add-on control mode, then just use the
D key.</p>
<h2>Add-on control mode</h2>
<p>To access all the features of the add-on, you need to switch to add-on
control mode, you can do this by pressing NVDA+Y once. You will hear a short
low beep and will be able to use the other commands described below. When
you press a key that is not used in the add-on, you will hear another signal
notifying you of an erroneous command and the add-on control mode will be
automatically turned off.</p>
<h2>Add-on commands list</h2>
<p>Basic dictionary commands:</p>
<ul>
<li>D - announce a dictionary entry for a selected word or phrase (same as
NVDA+Y);</li>
<li>W - show dictionary entry in a separate browseable window;</li>
<li>S - swap languages and get Quick Dictionary translation;</li>
<li>A - announce the current source and target languages;</li>
<li>C - copy last dictionary entry to the clipboard;</li>
<li>E - edit text before sending;</li>
<li>U - download from online dictionary and save the current list of available
languages;</li>
<li>function keys - select online dictionary service;</li>
<li>Q - statistics on the using the online service;</li>
<li>F - choose online service.</li>
</ul>
<p>Voice synthesizers profiles management:</p>
<ul>
<li>from 1 to 9 - selection of the voice synthesizer profile;</li>
<li>G - announce the selected profile of voice synthesizers;</li>
<li>B - back to previous voice synthesizer;</li>
<li>R - restore default voice synthesizer;</li>
<li>Del - delete the selected voice synthesizer profile;</li>
<li>V - save configured voice synthesizer profile;</li>
<li>P - display a list of all customized voice synthesizers profiles.</li>
</ul>
<p>Press O to open add-on settings dialog.</p>
<h2>Help on add-on commands</h2>
<p>You can see a list of all the commands used in the add-on as follows:</p>
<ul>
<li>Via the NVDA menu - by pressing NVDA+N, go to the submenu "Tools", then -
"Quick Dictionary" and activate the menu item "Help on add-on commands".</li>
<li>Press the H key in add-on control mode (NVDA+Y).</li>
</ul>
<h2>Add-on help</h2>
<p>To open the add-on help - press NVDA+N, go to the "Tools" submenu, then -
"Quick Dictionary" and activate the menu item "Help".</p>
<h2>Contributions</h2>
<p>We are very grateful to everyone who made the effort to develop, translate
and maintain this add-on:</p>
<ul>
<li>Cagri Dogan - Turkish translation;</li>
<li>Wafiqtaher - Arabic translation.</li>
</ul>
<p>Several good solutions from other developments were used in the Quick
Dictionary add-on. Thanks to the authors of the following add-ons:</p>
<ul>
<li>Instant Translate - Alexy Sadovoy, Beqa Gozalishvili, Mesar Hameed,
Alberto Buffolino and other NVDA contributors.</li>
<li>To work with voice synthesizers profiles were used ideas from the Switch
Synth add-on (thanks to Tyler Spivey).</li>
</ul>
<h2>Change log</h2>
<h3>Version 2.1</h3>
<ul>
<li>added a dialog to edit the text before sending to remote service;</li>
<li>separated add-on help page from ReadMe;</li>
<li>Turkish translation added (thanks to Cagri Dogan).</li>
</ul>
<h3>Version 2.0</h3>
<ul>
<li>added the ability to connect other online dictionary services;</li>
<li>added Lexicala service and its settings panel;</li>
<li>added a dialog for choosing an online service from the list of available
ones;</li>
<li>added a command to get information about the selected service;</li>
<li>added a dialog for working with profiles of voice synthesizers;</li>
<li>implemented the procedure for switching to the previous voice synthesizer;</li>
<li>implemented a parallel thread to monitor the state of the synthesizer;</li>
<li>due to an increase in the number of functions in the add-on - help for
commands is now displayed in a separate window;</li>
<li>updated procedure for caching requests to online services;</li>
<li>added add-on submenu to NVDA menu;</li>
<li>updated ReadMe.</li>
</ul>
<h3>Version 1.2</h3>
<ul>
<li>added the ability to automatically switch voice synthesizers for selected
languages;</li>
<li>added the ability to download the current list of languages available in
the online-dictionary;</li>
<li>Turkish translation added thanks to Cagri Dogan.</li>
</ul>
<h3>Version 1.1</h3>
<ul>
<li>changed some keyboard shortcuts which conflicted with other add-ons;</li>
<li>changed the description of the main add-on features;</li>
<li>updated help and translation of the add-on;</li>
<li>removed some keyboard shortcuts and gave to user opportunity to setup them
yourself;</li>
<li>fixed error in Ukrainian translation (thanks to Volodymyr Perig);</li>
<li>added russian translation.</li>
</ul>
<h3>Version 1.0: features of implementation</h3>
<ul>
<li>execution of requests to the remote server in a separate thread to avoid
blocking the operation of NVDA;</li>
<li>signals while waiting for a response from the server;</li>
<li>caching of the last 100 requests to reduce the load on the remote
dictionary service;</li>
<li>switching to add-on control mode;</li>
<li>possibility to use an alternative server;</li>
<li>add-on settings dialog.</li>
</ul>
Numpad Nav Modehttp://addons.nvda-project.org/addons/numpadNavMode.sk.html2024-03-22T18:27:51Z2020-09-30T21:00:07Z
<h1>Numpad Nav Mode</h1>
<ul>
<li>Author: Luke Davis (Open Source Systems, Ltd.)</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=numpadNavMode">stable version</a></li>
</ul>
<p>Numpad Nav Mode is an <a href="https://nvaccess.org/">NVDA</a> add-on, which allows you to easily switch
your keyboard's numpad between NVDA's navigation controls and the
non-screenreader Windows navigation controls. This can be especially useful
for users migrating from Jaws to NVDA. This add-on also gives granular
control over the numlock key toggle, both when NVDA starts, and optionally
in profiles.</p>
<h3>Navigation modes explanation and features</h3>
<p>The normal functions of the PC number pad, with numlock off, are: page up,
page down, home, end, four-way arrow keys, and a delete key. But NVDA
completely takes over the numpad, to provide review keys, mouse controls,
and object navigation controls. This is true even in laptop keyboard mode,
which also duplicates those functions on non-numpad keys.</p>
<p>However some users do have a numpad on their laptop, and would prefer to use
it for Windows navigation purposes (at least some of the time), especially
because some laptops do not provide home, end, or other such keys. That is
where this add-on can help. Additionally, some desktop users, for example
those used to the way the numpad works in JAWS, may sometimes find it
convenient to use the numpad for those keyboard functions rather than the
normal NVDA keys, which this add-on enables. This includes the popular JAWS
command NumpadInsert+Numpad2, for read to end, which was a specific feature
request from some early users of this add-on.</p>
<h3>How it works</h3>
<p>With numlock off, no matter what keyboard layout you are using, this add-on
will let you press Alt+NVDA+NumpadPlus (which is usually the long key second
up on the right), to quickly and easily switch between the normal NVDA
navigation controls, and the classic Windows navigation controls. This key
can be remapped under Input Gestures, in the Input section.</p>
<p>Note that this add-on doesn't disable the use of numpad insert as an NVDA
modifier, if you have it set as such. If you want that feature, please let
me know, although you can manually turn off numpad insert as a modifier in
NVDA keyboard settings. It also doesn't change the NVDA function of numpad
delete (key between zero and enter)--contact me if you desire this.</p>
<p>If you would prefer to have NVDA start with the Windows nav mode active by
default, you can configure that in NVDA configuration. Go to NVDA's
preferences, then settings, and find the Numpad Nav Mode settings panel.
There you will be able to select a checkbox to turn Windows Nav Mode on by
default when you start NVDA. To get there quickly, press NVDA+N, P, S, then
N one or more times until you hear "Numpad Nav Mode".</p>
<h3>Numlock features</h3>
<p>By default, nothing is done with the numlock key.</p>
<p>However, if you share your computer with a sighted user who prefers that
numlock always be turned on, but you like having it off so that the numpad
works with NVDA, you may want the numlock to automatically turned off when
NVDA starts. Alternatively, you may enter a lot of data, and so prefer the
numlock to always be on when you start NVDA.</p>
<p> Go to NVDA menu, Preferences, Settings, Numpad Nav Mode, and use the "state of numlock when NVDA starts or profile loads" selector. This has three options. The first, "do not change", is the default, and won't touch the numlock. It will be in whatever state it was in before NVDA started.
The second option, is "turn numlock off", which will always turn the numlock off when NVDA starts. The third option, "Turn numlock on", will turn the numlock on if it was off when NVDA started.
If you choose either the second or third option, the numlock will be restored to whatever state it was in before, when you exit NVDA. For example, if you choose "Turn numlock off", and numlock was on when you started NVDA: it will be turned off while you use NVDA, but will be turned back on when you exit NVDA.</p>
<h4>Advanced use cases</h4>
<p>If you use NVDA's powerful configuration profiles, and you would like the
numlock to automatically turn on when you enter certain profiles, do the
following:</p>
<ul>
<li>While in the "normal profile", go to the Numpad Nav Mode settings panel
described above. Check the box for "Initial numlock state is configuration
profile dependent". This option is unchecked by default.</li>
<li>Select OK.</li>
<li>Change to the profile where you want numlock to be always turned off or
on.</li>
<li>Go back to the Numpad Nav Mode settings panel, and select the option to
Turn numlock off or on, as you prefer.</li>
<li>Then select OK. Now, whenever you enter this profile, the numlock will
automatically change to the desired state.</li>
</ul>
<p>Note that this is a new feature, and I don't know if anyone has use for this
feature. If you find one, please send an email or open <a href="https://github.com/opensourcesys/numpadNavMode/issues/new">an issue</a>, to let
me know how you have found to make use of it.</p>
<p>Or, better yet, leave a <a href="https://github.com/nvaccess/addon-datastore/discussions/2630">review</a> for the add-on, and comment on it there!
Reviews are very helpful, whether or not you use that feature.</p>
<h3>New features</h3>
<p>I encourage you to post an <a href="https://github.com/opensourcesys/numpadNavMode/issues/new">issue</a>, or email with any feature
suggestions, or other use cases that I haven't listed here, or just to let
me know you find the add-on useful! But as mentioned above, if you do find
it useful, please leave a <a href="https://github.com/nvaccess/addon-datastore/discussions/2630">review</a>.</p>
<h3>History</h3>
<p>This add-on was the direct result of requests I've heard from users over the
years, and a GitHub discussion in
<a href="https://github.com/nvaccess/nvda/issues/9549">#9549</a>. With thanks to
@Qchristensen and @feerrenrut. The basic implementation of the numlock
features was borrowed from the legacy NumLock Manager add-on, by Noelia Ruiz
(@nvdaes on GitHub), and others. Used with permission.</p>
<h3>Changelog</h3>
<p>(This changelog is incomplete. See Git log for full details.)</p>
<ul>
<li>24.1.0: NVDA 2024.X compatibility.</li>
<li>23.1.0: Added numlock management features. Better logging. Improved config
profile handling (WIP).</li>
<li>23.0: NVDA 2023.X compatibility.</li>
</ul>
Vylepšenia prístupnosti pre Zoomhttp://addons.nvda-project.org/addons/zoomEnhancements.sk.html2023-05-10T20:38:33Z2020-09-05T17:37:31Z
<ul>
<li>Autori: Mohamad Suliman, Eilana Benish</li>
<li>Stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=zoomEnhancements">stabilnú verziu</a></li>
<li>NVDA compatibility: 2018.4 to 2022.1</li>
</ul>
<p>Doplnok uľahčuje prácu s aplikáciou Zoom. Pridáva klávesové skratky a
vylepšuje podporu pre vzdialený prístup.</p>
<h2>Klávesové skratky dostupné počas stretnutia</h2>
<ul>
<li><p>NVDA+shift+a: Prepína spôsob oznamovania upozornení. Dostupné sú tieto
možnosti:</p>
<ul>
<li>Reč (report all alerts): Oznamuje upozornenia prostredníctvom
hlasového výstupu</li>
<li>Pípanie (beep): upozornenia sú oznamované zvukom</li>
<li>vypnuté (silence): Upozornenia nie sú hlásené vôbec</li>
<li>Vlastné nastavenie (custom): Umožňuje definovať, ktoré upozornenia
majú byť oznamované. Nastavenie je možné vykonať pomocou klávesových
skratiek, alebo v nastaveniach doplnku.</li>
</ul>
</li>
</ul>
<p>Ak si zvolíte vlastné nastavenie, môžete použiť na vypínanie a zapínanie
upozornení nasledujúce klávesové skratky:</p>
<ul>
<li>NVDA + Ctrl + 1 (ak ste organizátorom konferencie): Účastník sa pridal
alebo opustil konferenciu.</li>
<li>NVDA + Ctrl + 2 (a k ste organizátorom konferencie): Účastník čaká na
pripojenie v čakacej miestnosti.</li>
<li>NVDA + Ctrl + 3: Organizátor vypol mikrofóny</li>
<li>NVDA + Ctrl + 4: Organizátor vypol prenos videa</li>
<li>NVDA + Ctrl + 5: Účastník spustil alebo ukončil zdieľanie obrazovky</li>
<li>NVDA + Ctrl + 6: Informácia o povolení nahrávať stretnutie</li>
<li>NVDA + Ctrl + 7: Upozornenie na verejnú textovú správu</li>
<li>NVDA + Ctrl + 8: upozornenie na súkromnú textovú správu</li>
<li>NVDA + Ctrl + 9: Upozornenie na prijatie súboru</li>
<li>NVDA + Ctrl + 0: Oprávnenie organizátora</li>
<li>NVDA + Shift + Ctrl + 1 (ak ste organizátorom stretnutia): Hosť sa
prihlásil alebo odhlásil z diskusie</li>
<li>NVDA + Shift + Ctrl + 2: Oprávnenie na vzdialené ovládanie</li>
<li>NVDA + Shift + Ctrl + 3: Upozornenia na novú textovú správu</li>
</ul>
<p>Upozorňujeme, že doplnok funguje správne len vtedy, ak v nastaveniach
aplikácie Zoom povolíte v časti prístupnosť (accessibility) zobrazovanie
všetkých upozornení (all alerts).</p>
<h2>Klávesová skratka pre dialóg s nastaveniami</h2>
<p>NVDA+Z: Otvorí dialóg nastavení doplnku</p>
<p>V tomto okne môžete:</p>
<ul>
<li>Vidieť, ktoré upozornenia sú a nie sú hlásené</li>
<li>Vybrať, ktoré upozornenia majú byť hlásené</li>
<li>Vybrať spôsob oznamovania</li>
<li>Uložiť vlastné nastavenie</li>
</ul>
<h2>Vzdialený prístup</h2>
<p>Po udelení povolenia na vzdialené ovládanie skratkou nvda+O prepínajte medzi
zameraním vzdialeného a vášho počítača.</p>
<p>Skratka funguje správne vtedy, ak sa nachádzate v okne aktívneho stretnutia</p>
<h2>Dôležité upozornenie</h2>
<p>Vlastné nastavenie upozornení funguje len vtedy, ak používate aplikáciu Zoom
v anglickom jazyku.</p>
Zamrznuté NVDAhttp://addons.nvda-project.org/addons/killNVDA.sk.html2023-05-10T20:38:33Z2020-04-20T19:07:51Z
<ul>
<li>Autor: Tyler Spivey</li>
<li>Funguje s NVDA 2019.2 a 2019.3</li>
<li>stiahnúť <a href="https://www.nvaccess.org/addonStore/legacy?file=killnvda">stabilnú verziu</a></li>
</ul>
<p>Doplnok je určený na tvrdé ukončenie NVDA v situáciách, keď NVDA zamrzne.</p>
<h2>Použitie</h2>
<ol>
<li>nainštalujte doplnok.</li>
<li>Vo všeobecných nastaveniach aktivujte funkciu Použiť aktuálne nastavenia
na prihlasovacej a zabezpečených obrazovkách.</li>
<li>Ak NVDA zamrzne, stlačte ctrl+alt+del. Následne aktivujte ponuku NVDA >
nástroje > Kill NVDA.</li>
</ol>
<p>Následne stlačte escape a NVDA sa reštartuje.</p>
Časové pásmahttp://addons.nvda-project.org/addons/timeZoner.sk.html2023-06-19T15:45:56Z2020-04-06T00:05:35Z
<ul>
<li>Autor: Munawar Bijani</li>
<li>Stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=timezone">stabilnú verziu</a></li>
<li>Funguje s NVDA od verzie 2019.2.1</li>
</ul>
<p>Doplnok oznamuje čas vo vybratých časových zónach.</p>
<h2>Úvod</h2>
<p>V operačnom systéme Windows je možné zobraziť čas súčasne vo viacerých
časových pásmach. Pre vidiaceho používateľa je zobrazený čas okamžite
dostupný.</p>
<p>Používatelia čítačov obrazovky <a href="https://www.nvaccess.org/">NVDA</a> alebo
<a href="http://www.freedomscientific.com">JAWS</a>, doposiaľ nemali jednoduchú možnosť
získať informácie o čase v konkrétnej časovej zóne. Používali aplikácie
tretích strán a mnohé z nich neboli voľne dostupné.</p>
<p>Pracujem vo viacerých časových pásmach a nechcelo sa mi viac prevádzať si
čas v hlave, obzvlášť v prípadoch, ak čas nie je presne viazaný na celú
hodinu (napríklad India je +5:30 UTC).</p>
<p>Preto som vytvoril tento doplnok pre NVDA.</p>
<h2>Použitie</h2>
<p>Doplnok podporuje staršie aj novšie verzie NVDA.</p>
<p>Po nainštalovaní doplnku aktivujte menu NVDA > Možnosti > časové pásma (time
zoner).</p>
<p>Aktivujte položku Kruh časových zón (Configure timezone ring).</p>
<p>V dialógu začiarknite časové pásma, ktoré chcete používať pri oznamovaní
času.</p>
<p>Nájdite požadované časové pásmo a pridajte ho medzi časové pásma vybratím
medzerníkom. Pridané pásmo môžete odstrániť tlačidlom odstrániť (remove).</p>
<p>Poradie časových zón môžete zoradiť použitím tlačidiel posunúť hore (move
up) alebo posunúť dole (move down).</p>
<p>Časové pásmo môžete vyhľadať aj použitím editačného poľa filter.</p>
<p>Ak začiarknete políčko Krátke hlásenie (Announce abbreviated timezones),
bude doplnok hlásiť časové pásma v tvare IST alebo GMT. Štandardne sú
hlásené celé názvy, ako Azia/Kolkata alebo Európa/Londýn.</p>
<p>Zmeny uložíte tlačidlom Uložiť (save).</p>
<p>Skratkou NVDA+alt+T si môžete postupne prečítať aktuálny čas v nastavených
časových pásmach.</p>
<p>Po inštalácii sa doplnok pokúsi zistiť vašu aktuálnu časovú zónu.</p>
<h2>Zoznam zmien</h2>
<h3>Verzia 1.03, vydaná 21. 3. 2020</h3>
<ul>
<li>Doplnok sa viac nezrúti, ak nie je možné zistiť aktuálnu časovú zónu.</li>
<li>Opravené problémy s relatívnymi odkazmi v návode.</li>
</ul>
<h3>Verzia 1.02, vydaná 18. 3. 2020</h3>
<ul>
<li>Po inštalácii novej verzie doplnku sa viac nestratia nastavenia.</li>
<li>Upravené podľa nových štandardov doplnkov NVDA.</li>
</ul>
<h3>Verzia 1.01, vydaná 12. 3. 2020</h3>
<ul>
<li>Čas je oznamovaný podľa nastavenia operačného systému, takže doplnok
oznamuje čas v 24-hodinovom formáte, ak je to potrebné.</li>
<li>Pridané skrátené oznamovanie časových zón, nastavuje sa začiarknutím
príslušného políčka pri nastavovaní kruhu časových zón.</li>
<li>Pridané komentáre pre prekladateľov (@ruifontes).</li>
<li>Pridané poznámky pre prekladateľov (@ruifontes).</li>
<li>Dialóg s nastaveniami je možné zavrieť tlačidlom escape (@ruifontes).</li>
<li>Položka na aktivovanie kruhu nastavení je správne pomenovaná (@ruifontes).</li>
<li>Doplnok po inštalácii vyhľadá aktuálnu časovú zónu.</li>
<li>Pridaná možnosť oznamovania viacerých časových zón cez kruh časových zón.</li>
<li>Používame skratku nvda+alt+t, aby nedochádzalo ku konfliktu s doplnkom
Hodiny.</li>
<li>Do okna s nastaveniami pridaný filter. Výsledky hľadania sa zužujú
okamžite pri písaní a NVDA túto skutočnosť oznamuje.</li>
<li>Podpora pre Python2</li>
<li>Dátum a čas je oznamovaný cez samostatné vlákna, aby nedochádzalo k
zamrznutiu.</li>
<li>Okno s nastaveniami odteraz má aj tlačidlo zavrieť a nespôsobuje viac
zamrznutie pri pokuse ukončiť NVDA.</li>
</ul>
Vylepšenia od Tonyhohttp://addons.nvda-project.org/addons/tonysEnhancements.sk.html2024-02-13T14:36:27Z2020-04-01T21:52:59Z
<ul>
<li>Autor: Tony Malykh</li>
<li>Stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=tonysEnhancements">stabilnú verziu</a></li>
<li>NVDA compatibility: 2022.4 and 2023.1</li>
</ul>
<p>This add-on contains a number of small improvements to NVDA screenreader,
each of them too small to deserve a separate add-on.</p>
<h2>Nové príkazy na prácu s tabuľkami</h2>
<ul>
<li>NVDA+Ctrl+číslo v rozsahu 0 - 9 - Prejde na stĺpec v tabuľke.</li>
<li>NVDA+Alt+číslo v rozsahu 0 až 9 - prejde na riadok v tabuľke.</li>
</ul>
<h2>Removed table navigation commands</h2>
<p>The following table navigation commands have been Removed as they have been
integrated into the latest version of NVDA core.</p>
<ul>
<li>Jump to the first/last column in the table.</li>
<li>Jump to the first/last row in the table.</li>
<li>Read current column in the table starting from current cell down.</li>
<li>Read current row in the table starting from current cell.</li>
<li>Read current column in the table starting from the top.</li>
<li>Read current row in the table starting from the beginning of the row.</li>
</ul>
<p>Note: To learn about NVDA's default gestures for these features, please
refer to the NVDA user guide.</p>
<h2>Copying tables to clipboard</h2>
<p>With the following shortcuts you can copy either the whole table or current
row or current column in a formatted way, so that you can paste it as a
table to rich text editors, such as Microsoft Word or WordPad.</p>
<ul>
<li>NVDA+Alt+T - shows popup menu with options to copy table or part of it.</li>
</ul>
<p>There are also separate scripts for copying tables, rows, columns and cells,
but they don't have keyboard shortcuts assigned by default, custom keyboard
shortcuts cfor them can be assigned in InputGestures dialog of NVDA.</p>
<h2>Enhanced word navigation commands</h2>
<p>As of version 1.8 this functionality has been moved to <a href="https://github.com/mltony/nvda-word-nav/">WordNav
add-on</a>.</p>
<h2>Automatic language switching</h2>
<p>Allows to automatically switch the language of your synthesizer by character
set. Refgular expression for every language can be configured in the
preferences window for this add-on. Please make sure that your synthesizer
supports all the languages you're interested in. Switching between two
Latin-based languages or two languages whose character sets are similar is
not supported at this time.</p>
<h2>Quicksearch commands</h2>
<p>You can have up to three slots for configurable regular expressions that you
frequencly search for in editables. By default they are assigned to
<code>PrintScreen</code>, <code>ScrollLock</code> and <code>Pause</code> buttons. You can perform forward
search, or backward search by pressing <code>Shift</code> combined with these buttons.</p>
<h2>Suppress unwanted 'unselected' speech from NVDA</h2>
<p>Suppose you have some text selected in text editors. Then you press a key,
such as Home, or UpArrow, that is supposed to take you to another part of
the document. NVDA would announce 'unselected' and then speak the former
selection, which can be inconvenient at times. This feature prevents NVDA
from speaking formerly selected text in situations like this.</p>
<h2>Skratky dynamického obsahu</h2>
<p>Môžete si vytvoriť skratky, pomocou ktorých budete sledovať zmeny v
aplikáciách. Po stlačení skratky bude NVDA sledovať zameranú aplikáciu a
upozorňovať na zmeny. Takto môžete v textových editoroch sledovať záložky</p>
<p>Definovanie skratiek je jednocuhé: Každá definícia je na samostatnom riadku.
<code>
appName keystroke
</code>
Kde <code>nazovaplikacie</code> je názov programu, v ktorom bude táto skratka
fungovať. Môžete tiež použiť znak <code>*</code> na použitie skratky vo všetkých
aplikáciách. Skratku je potrebné zadať vo formáte
<code>control+alt+shift+pagedown</code>.</p>
<p>In order to figure out appName for your application, do this:</p>
<ol>
<li>Switch to your application.</li>
<li>Open NVDA Python Console by pressing NVDA+Shift+Z.</li>
<li>Type <code>focus.appModule.appName</code> and hit enter.</li>
<li>Press F6 to go to output pane and find appName value in the last line.</li>
</ol>
<h2>Showing and hiding windows</h2>
<p>You can hide current window, and you can show all currently hidden
windows. This might be useful if you use multiple windows in the same app
(say Chrome) and you would like to rearrange them.</p>
<ul>
<li>NVDA+Shift+-: hide current window.</li>
<li>NVDA+Shift+=: Show all currently closed windows.</li>
</ul>
<p>Please note, that if you quit NVDA while a window is hidden, there is
currently no way to show it after NVDA is restarted.</p>
<h2>Console enhancements</h2>
<p>Previously this add-on included a number of console-related features. As of
version 1.8, all console-related features have been moved to <a href="https://github.com/mltony/nvda-console-toolkit/">Console
Toolkit
add-on</a>. Specifically:</p>
<ul>
<li>Sledovanie konzoly</li>
<li>Beep on console updates</li>
<li>Enforce Control+V in consoles</li>
</ul>
<h2>Pípať ak je NVDA zaneprázdnené</h2>
<p>Po aktivovaní bude upozorňovať na situácie, keď je čítač obrazovky
zaneprázdnený. Nemusí to nutne znamenať problémy, budete ale vedieť, že NVDa
aktuálne nespracúva príkazy z klávesnice.</p>
<h2>Volume adjustment</h2>
<ul>
<li>NVDA+Ctrl+PageUp/PageDown - upravuje hlasitosť NVDA.</li>
<li>NVDA+Alt+PageUp/PageDown - adjust volume of all applications except for
NVDA.</li>
</ul>
<h2>Sound split</h2>
<p>In Sound split mode NVDA will direct all sound output to the right channel,
while applications will play their sounds in the left channel. Channels can
be switched in settings.</p>
<ul>
<li>NVDA+Alt+S toggles sound split mode.</li>
</ul>
<p>Please note, that in certain situations sound output from an application
might be limited to one channel even when NVDA is not running. For example,
this could happen if NVDA has crashed while sound split was on, or when NVDA
exited cleanly while the app in question was not running. In those
situations, please restart NVDA, and turn off sound split while the app in
question is running.</p>
<h2>Enhanced mouse functions</h2>
<ul>
<li>Alt+NumPadDivide: Point mouse cursor at current object and click it.</li>
<li>Alt+NumPadMultiply: Point mouse cursor at current object and right mouse
button click on it.</li>
<li>Alt+NumPadPlus/NumPadMinus: Point mouse cursor at current object and
scroll down/up. THis is useful for infinite scroll webpages and webpages
that load more content on scroll.</li>
<li>Alt+NumPadDelete: Move mouse cursor out of the way to top left corner of
the screen. This can be useful to prevent unwanted hover over windows in
certain applications.</li>
</ul>
<h2>Detecting insert mode in text editors</h2>
<p>If this option is enabled, NVDA will beep when it detects insert mode in
text editors.</p>
<h2>Blokovanie klávesu insert</h2>
<p>Dvojité stlačenie klávesu insert v niektorých aplikáciách spúšťa špeciálny
režim vkladania. Môžete si takto nechtiac spustiť tento režim. Doplnok toto
blokuje, pričom režim vkladania môžete stále spustiť kombináciou NVDA+F2
nasledovanou klávesom insert.</p>
<p>Táto funkcia je predvolene vypnutá a je potrebné ju aktivovať v
nastaveniach.</p>
<h2>System priority of NVDA process</h2>
<p>This allows to boost system priority of NVDA process, that might improve
NVDA responsiveness, especially when CPU load is high.</p>
<h2>Fixing a bug when focus gets stuck in the taskbar when pressing Windows+Numbers</h2>
<p>There is a bug in Windows 10, and possibly in other versions. When switching
between applications using Windows+number shortcut sometimes the focus gets
stuck in the taskbar area instead of jumping to the window being switched
to. Since trying to report this bug to Microsoft is hopeless, a workaround
has been implemented in this add-on. The add-on detects this situation and
plays a short low-pitch beep when this situation is detected, then the
add-on fixes it automatically.</p>
Zvuková interpunkciahttp://addons.nvda-project.org/addons/phoneticPunctuation.sk.html2023-08-22T14:48:40Z2020-04-01T21:52:58Z
<ul>
<li>Autor: Tony Malykh</li>
<li>Stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=phoneticPunctuation">stabilnú verziu</a></li>
<li>Funguje s NVDA 2019.3</li>
</ul>
<p>Tento doplnok umožňuje interpretovať interpunkčné znamienka pomocou
zvukov. Takisto je možné pomocou regulárnych výrazov previesť na zvuk
akékoľvek slovo alebo skupinu reťazcov.</p>
<h2>Demo</h2>
<p>Ak si chcete vypočuť, ako to znie, ukážku nájdete na adrese
https://soundcloud.com/user-977282820/nvda-phonetic-punctuation-demo
(anglicky).</p>
<h2>Použitie</h2>
<ol>
<li>Odporúčame nastaviť úroveň interpunkcie na všetku. Môžete to urobiť
opakovaným stláčaním skratky nvda+p.</li>
<li>Taktiež je potrebné aktivovať doplnok skratkou nvda+alt+p.</li>
<li>Pravidlá interpretovania môžete nastaviť v ponuke doplnku v menu
Nastavenia.</li>
<li>Súčasťou doplnku sú niektoré pravidlá. Nie všetky sú však predvolene
zapnuté. Môžete tieto pravidlá upraviť alebo vytvoriť vlastné.</li>
<li>Pravidlá sa ukladajú do priečinka s konfiguráciou NVDA do súboru
<code>phoneticPunctuationRules.json</code>.</li>
</ol>
<h2>Podporované hlasové výstupy</h2>
<p>Doplnok je závislí na novom spracovaní textu integrovanom v NVDA. Pri
testovaní v októbri 2019 sa ukázalo, že nie všetky hlasové výstupy zvládajú
nové príkazy.</p>
<p>Doplnok funguje s týmito syntézami reči:</p>
<ul>
<li>Microsoft Speech API</li>
<li>eSpeak</li>
<li>Hlasy onecore v systéme Windows 10</li>
</ul>
<p>Problémy majú tieto hlasové výstupy:</p>
<ul>
<li>IBMTTS: Pozrite <a href="https://github.com/davidacm/NVDA-IBMTTS-Driver/issues/22">Popis problému
(anglicky)</a>.</li>
<li>RHVoice: Nepodporuje príkaz na prerušenie reči break.</li>
</ul>
<h2>Licencia</h2>
<p>Zvuky poskytol T.V. Raman a sú súčasťou
emacspeak. https://github.com/tvraman/emacspeak/ (anglicky).</p>
Oznamovanie hesielhttp://addons.nvda-project.org/addons/reportPasswords.sk.html2024-03-10T18:24:18Z2019-12-23T05:39:56Z
<ul>
<li>Authors: Noelia Ruiz Martínez</li>
</ul>
<p>Umožňuje čítať napísané znaky pri písaní do heslových editačných polí,
napríklad pri prihlasovaní do e-mailového konta, keď sa bežne zobrazujú len
hviezdičky alebo iné znaky skrývajúce heslo.</p>
<p>Upozorňujeme: NVDA umožňuje oznamovať napísané znaky v editačných poliach
pre terminály a Windows konzolu. Doplnok tieto prvky neovplyvňuje.</p>
<h2>Nastavenie</h2>
<p>Doplnok nastavíte z menu nvda > nastavenia zvolením príslušnej kategórie. V
dialógu klávesové skratky si tiež môžete nastaviť klávesovú skratku na
otvorenie nastavení doplnku.</p>
<p>Tip: Ak pri písaní nepotrebujete čítanie po znakoch a po slovách, ale
súčasne chcete, aby vám NVDA čítalo napísané znaky pri písaní hesiel, môžete
si vytvoriť konfiguračný profil. V tomto profile nastavte oznamovanie pri
písaní hesiel. Profil aktivujte klávesovou skratkou, alebo môžete nastaviť
aktiváciu vzhľadom na situáciu. Doplnok sa po nainštalovaní opýta, či chcete
takýto profil vytvoriť.</p>
<h2>Changes for 4.0</h2>
<ul>
<li>Compatible with NVDA 2023.1.</li>
</ul>
<h2>Changes for 3.0</h2>
<ul>
<li>Cannot be run in secure mode.</li>
<li>Compatible with NVDA 2022.1.</li>
</ul>
<h2>Changes for 2.0</h2>
<ul>
<li>Compatible with NVDA 2021.1.</li>
</ul>
<h2>Verzia 1.0</h2>
<ul>
<li>Prvé vydanie.</li>
</ul>
Nastavenia kruhu hlasového výstupuhttp://addons.nvda-project.org/addons/synthRingSettingsSelector.sk.html2023-05-10T20:38:33Z2019-10-01T15:58:56Z
<ul>
<li>Autor: David CM</li>
<li>Stiahnúť <a href="https://www.nvaccess.org/addonStore/legacy?file=synthrings">stabilnú verziu</a></li>
<li>Stiahnúť <a href="https://www.nvaccess.org/addonStore/legacy?file=synthrings">vívojovú verziu</a></li>
<li>Funguje s NVDA 2019.2</li>
</ul>
<p>Tento doplnok umožňuje používateľovi zvoliť, ktoré nastavenia majú byť k dispozícii v kruhu nastavení hlasového výstupu.</p>
<h2>Vlastnosti</h2>
<p>Tento doplnok poskytuje nasledujúce funkcie:</p>
<ul>
<li>Vetvu v strome nastavení NVDA, kde je možné vybrať nastavenia, ktoré budú
dostupné v kruhu hlasového výstupu.</li>
<li>Uložiť konkrétne nastavenia pre konkrétny konfiguračný profil.</li>
<li>prepíše predvolené nastavenia pre konkrétny hlasový výstup.</li>
</ul>
<h2>Požiadavky</h2>
<p>Vyžaduje sa NVDA od 2019.2.</p>
<h2>Inštalácia</h2>
<p>Stačí nainštalovať ako doplnok NVDA.</p>
<h2>Použitie</h2>
<p>Ak chcete zapnúť alebo vypnúť príslušné nastavenia kruhu nastavení hlasového
výstupu, otvorte ponuku NVDA > nastavenia. Nastavenia môžete začiarknúť a
odčiarknuť vo vetve nastavenia kruhu hlasového výstupu. Dostupné sú tieto
možnosti:</p>
<ul>
<li>Jazyk.</li>
<li>Hlas.</li>
<li>variant.</li>
<li>Rýchlosť.</li>
<li>Znásobiť tempo.</li>
<li>Hlasitosť.</li>
<li>Výška.</li>
<li>Intonácia.</li>
</ul>
<p>Poznámka: V tomto dialógovom okne sú zobrazené iba podporované nastavenia
aktuálneho hlasového výstupu. Nastavenia, ktoré sa tu nenachádzajú, sa v
konfigurácii doplnku nemenia.</p>
Pomocník pre ladeniehttp://addons.nvda-project.org/addons/debugHelper.sk.html2024-02-13T14:34:57Z2019-08-30T15:30:10Z
<ul>
<li>Autor: Luke Davis</li>
<li>Stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=debughelper">stabilnú verziu</a></li>
</ul>
<p>Cieľom doplnku je uľahčiť vývoj NVDA a diagnostiku chýb. Ak máte nápady na
nové funkcie, napíšte mi e-mail, veľmi rád ich zaradím. Akceptujem tiež
<a href="https://github.com/XLTechie/debugHelper">Hlásenia chýb a návrhy na GitHub</a>.</p>
<h2>Klávesové skratky</h2>
<ul>
<li>NVDA+shift+F1: Vloží do logu NVDA značku.</li>
</ul>
<h2>Využitie</h2>
<p>Po stlačení klávesovej skratky sa do logu NVDA zapíše značka v tomto tvare:</p>
<pre><code>-- Mark 1 --
</code></pre>
<p>NVDA takisto oznámi zapísanie značky 1.</p>
<p>Po opätovnom stlačení skratky sa do logu zapíše:</p>
<pre><code>-- Mark 2 --
</code></pre>
<p>NVDA oznámi zapísanie značky 2.</p>
<p>Predstavme si nasledujúcu situáciu: Viete, že určité správanie spôsobuje
chybu v NVDA a táto chyba sa zapíše dlhým záznamom do logu NVDA. Záznam
chcete poslať do mailinglistu, alebo ako report do <a href="https://github.com/nvaccess/nvda/issues">NVDA GitHub issue
trackera</a>. Nechcete ale prehľadávať
celý log, aby ste našli príslušnú časť. Preto najprv pomocou klávesovej
skratky vložíte značku a potom vykonáte činnosti, ktoré spôsobujú zamrznutie
a pád NVDA. Ak viete, že chcete zaznamenať ďalšie chyby, môžete vložiť
ďalšie značky. Takto viete určiť, čo ste robili pri vkladaní napríklad
tretej značky. Iná situácia môže nastať, keď používate nejakú aplikáciu a
znenazdajky dôjde k chybe. Nechcete prerušiť prácu, súčasne si ale chcete
miesto poznačiť. Preto pomocou klávesovej skratky vložíte značku, ktorú
neskôr viete v logu vyhľadať. Chybu budete potom hľadať smerom od značky
nahor.</p>
<p>Značky môžete rýchlo vyhľadať pomocou poznámkového bloku alebo napríklad
Notepad++. Pred každou značkou doplnok automaticky vloží prázdny
riadok. Toto je užitočné pri rýchlom prezeraní záznamu. Aj pri rýchlom
stláčaní šípky dokážete rozpoznať slovo "prázdny". Môžete tiež nastaviť, aby
sa pred značku vložilo viac prázdnych riadkov.</p>
<p>Upozorňujem, že znovu načítanie doplnkov NVDA nemá vplyv na číslovanie
značiek. Značky sa číslujú od 1 po reštarte NVDA.</p>
<h2>Nastavenie</h2>
<p>V nastaveniach NVDA po nainštalovaní doplnku pribudne vetva "Pomoc pri
ladení". Tu môžete nastaviť, koľko prázdnych riadkov chcete vložiť pred a za
značku. Pred značku sa predvolene vkladá jeden prázdny riadok, za značku sa
nevkladajú žiadne prázdne riadky. V oboh prípadoch môžete vložiť maximálne
10 riadkov. Klávesovú skratku na vloženie značky môžete nastaviť v dialógu
klávesové skratky, hľadajte vetvu nástroje.</p>
<h2>Zmeny</h2>
<ul>
<li><p>Verzia 1.0.2 (2019-08-28)</p>
<ul>
<li>Pridané preklady a upravený kód.</li>
</ul>
</li>
<li><p>Verzia 1.0.1 (2019-08-26)</p>
<ul>
<li>Drobné úpravy a opravené problémy s inštaláciou na niektorých verziách
Windows.</li>
</ul>
</li>
<li><p>Verzia 1.0 (2019-08-22)</p>
<ul>
<li><p>Prvotné vydanie. Dostupné sú tieto možnosti:</p>
<ul>
<li>Pridávanie značiek do logu NVDA (od úrovne ifo).</li>
<li>Možnosť pridať pred a po značke až do desať prázdnych riadkov.</li>
<li>Nastavenie cez strom nastavení NVDA.</li>
</ul>
</li>
</ul>
</li>
</ul>
Notepad++http://addons.nvda-project.org/addons/notepadPlusPlus.sk.html2023-05-10T20:38:33Z2019-08-11T13:52:23Z
<ul>
<li>Autory: Derek Riemer, Tuukka Ojala</li>
<li>Stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=NotepadPlusPlus">Stabilnú verziu</a></li>
</ul>
<p>Tento doplnok zlepšuje prístupnosť textového editora Notepad++. Ak sa
chcete dozvedieť viac a prečítať si dokumentáciu pred inštaláciou, navštívte
[stránku doplnku na serveri github (anglicky)]
(https://github.com/derekriemer/nvda-notepadplusplus)</p>
Pípajúca klávesnicahttp://addons.nvda-project.org/addons/beepKeyboard.sk.html2023-05-10T20:38:33Z2019-05-20T16:57:49Z
<ul>
<li>Autor: David CM</li>
<li>Stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=beepkeyboard">stabilnú verziu</a></li>
<li>stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=beepkeyboard">vývojovú verziu</a></li>
<li>Funguje s NVDA 2018.2 do 2019.2</li>
</ul>
<p>Umožňuje zapnúť pípanie pri určitých klávesových skratkách.</p>
<h2>Vlastnosti</h2>
<p>Dostupné sú tieto funkcie:</p>
<ul>
<li>Pípať pri písaní veľkých písmen s Capslockom: NVDA bude pípať, ak napíšete
znak so shiftom a súčasne je zapnutý capslock.</li>
<li>Pípať pri písaní veľkých písmen so Shiftom: NVDA bude pípať, ak s písmenom
stlačíte súčasne shift.</li>
<li>Pípať pri prepínaní Capslocku, Numlocku a iných preraďovačov: NVDA nižším
tónom oznamuje vypnutie a vyšším zapnutie. Takto môžete mať oznamované
zapnutie a vypnutie capslocku a numlocku. Táto funkcia je dostupná aj
priamo v centre prístupnosti v systéme Windows. Funkcia priamo v doplnku
lepšie funguje na rozložení desktop.</li>
<li>Oznamovať prepínanie Capslocku, Numlocku a iných preraďovačov (: Ak
zapnete pípanie, môžete si ešte nechať okrem zvukov oznamovať stav aj
hlasom.</li>
<li>Vždy pípať pri napísaní týchto znakov: NVDA bude pípať pri znakoch, ktoré
nastavíte v pokročilých nastaveniach.</li>
<li>Nepípať v heslových editačných poliach: Toto nastavenie je predvolene
začiarknuté, aby sa predišlo bezpečnostným rizykám. Môžete ho odčiarknuť,
ak chcete oznamovať znaky pri písaní hesiel pípaním.</li>
</ul>
<h2>Systémové požiadavky</h2>
<p>Potrebujete NVDA od verzie 2018.2.</p>
<h2>Inštalácia</h2>
<p>Doplnok stačí ainštalovať pomocou správcu doplnkov.</p>
<h2>Použitie</h2>
<p>Nastavenia doplnku nájdete v nastaveniach NVDA, vo vetve pípajúca klávesnica.</p>
<ul>
<li>Predvolene je zapnuté pípanie v situáciách, ak je zapnutý capslock a
súčasne píšete znaky so Shiftom.</li>
</ul>
<p>Ďalšie nastavenia môžete upraviť v dialógu Pokročilé nastavenia.</p>
<ul>
<li>Ignorované znaky so stlačeným shiftom: Tu uveďte znaky, pri ktorých nebude
NVDA pípať. Môžete použiť aj "\t" pre tab, "\r" pre koniec riadka.</li>
<li>Vždy pípať pri napísaní týchto znakov: Tu uveďte znaky, pri ktorých bude
NVDA pípať. môžete použiť "\t" pre tab, "\r" pre koniec riadka.</li>
<li>Vyberte tón, ktorého nastavenia chcete upraviť. Môžete upraviť parametre
pre všetky zvuky. Hodnoty zadáte v nasledujúcich editačných poliach. NVDA
zapípa pri vybratí príslušného zvuku.</li>
<li>Výška: Výška aktuálne vybratého tónu.</li>
<li>Dĺžka: Dĺžka práve vybratého tónu.</li>
<li>Hlasitosť: Hlasitosť vybratého tónu.</li>
<li>Testovať: Prehrá zvuk s novými nastaveniami.</li>
<li>Nastavenia uložíte tlačidlom OK, zahodíte tlačidlom Zrušiť.</li>
</ul>
Nástroje pre vývojárovhttp://addons.nvda-project.org/addons/developerToolkit.sk.html2024-02-13T14:34:55Z2019-05-20T02:40:40Z
<ul>
<li>Autor: Andy Borka</li>
<li>Stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=devtoolkit">stabilnú verziu</a></li>
<li>Stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=devtoolkit-dev">vývojovú verziu</a></li>
<li>Funguje s NVDA od verzie 2019.1 po 2020.1.</li>
</ul>
<p>Doplnok umožňuje získavať informácie o vizuálnych vlastnostiach prvkov a
objektov. Pomocou vstavaných príkazov sa môžete pohybovať medzi prvkami a
zistiť informácie o veľkosti, pozícii a ďalších vlastnostiach prvkov. Najprv
je potrebné presunúť kurzor na požadovaný objekt. Následne stlačte
<strong>ALT+WINDOWS+K</strong>. Prácu v režime doplnku ukončíte opätovným stlačením
<strong>ALT+WINDOWS+K</strong>. V režime prehliadania najprvj aktivujte režim fokusu
skratkou <strong>nvda+medzera</strong> a vypnite rýchlu navigáciu skratkou
<strong>nvda+shift+medzera</strong>.</p>
<h2>Príkazy</h2>
<p>Po aktivovaní režimu doplnku sú dostupné tieto príkazy:</p>
<ul>
<li><strong>ALT+WINDOWS+K</strong> - Aktivuje a deaktivuje funkcie pre vývojárov.</li>
<li><strong>ľavá šípka</strong> - Zameria predchádzajúci objekt rovnakej úrovne.</li>
<li><strong>pravá šípka</strong> - zameria nasledujúci objekt rovnakej úrovne.</li>
<li><strong>Šípka hore</strong> - zameria nadradený rodičovský objekt.</li>
<li><strong>Šípka dole</strong> - zameria podradený objekt potomka.</li>
<li><strong>CTRL+HOME</strong> - Zameria prvý hlavný objekt.</li>
<li><strong>home</strong> - presunie kurzor na definovaného relatívneho rodiča.</li>
<li><strong>A</strong> - vo webovom zobrazení oznámi HTML atribúty. Stlačené dvakrát rýchlo
za sebou skopíruje informáciu do schránky.</li>
<li><strong>B</strong> - Oznámi pozíciu spodného okraja objektu. Stlačené dvakrát rýchlo za
sebou skopíruje informáciu do schránky.</li>
<li><strong>SHIFT+B</strong> - oznámi vzdialenosť spodného okraja objektu od spodného
okraja rodičovského objektu. Stlačené dvakrát rýchlo za sebou skopíruje
informáciu do schránky.</li>
<li><strong>C</strong> - oznámi počet podradených objektov (potomkov) objektu. Stlačené
dvakrát rýchlo za sebou skopíruje informáciu do schránky.</li>
<li><strong>ctrl+c</strong> - Prepína oznamovanie farieb. Dostupné sú možnosti RGB, Hex a
názvy.</li>
<li><strong>CTRL+D</strong> - Prepína medzi dlhými a krátkymi správami.</li>
<li><strong>F</strong> - V režime prehliadania oznámi informácie o formátovaní
prvku. Stlačené dvakrát rýchlo za sebou skopíruje informáciu do schránky.</li>
<li><strong>h</strong> - oznámi výšku objektu. Stlačené dvakrát rýchlo za sebou skopíruje
informáciu do schránky.</li>
<li><strong>L</strong> - Oznámi pozíciu ľavého okraja objektu. Stlačené dvakrát rýchlo za
sebou skopíruje informáciu do schránky.</li>
<li><strong>n</strong> - Oznámi názov objektu. Stlačené dvakrát rýchlo za sebou skopíruje
informáciu do schránky.</li>
<li><strong>CTRL+P</strong> - Umožní nastaviť relatívneho rodiča pre neskoršie určenie
pozície nadradených a podradených objektov.</li>
<li><strong>P</strong> - Oznámi názov relatívneho rodiča. Stlačené dvakrát rýchlo za sebou
skopíruje informáciu do schránky.</li>
<li><strong>R</strong> - Oznámi pozíciu pravého okraja objektu. Stlačené dvakrát rýchlo za
sebou skopíruje informáciu do schránky.</li>
<li><strong>SHIFT+R</strong> - Oznámi vzdialenosť pravého okraja objektu od pravého okraja
relatívneho rodiča. Stlačené dvakrát rýchlo za sebou skopíruje informáciu
do schránky.</li>
<li><strong>ALT+R</strong> - oznámi typ prvku. Stlačené dvakrát rýchlo za sebou skopíruje
informáciu do schránky.</li>
<li><strong>S</strong> - Oznámi počet objektov na rovnakej úrovni ako zameraný
objekt. Stlačené dvakrát rýchlo za sebou skopíruje informáciu do schránky.</li>
<li><strong>shift+s</strong> - Oznámi stav prvku. Stlačené dvakrát rýchlo za sebou
skopíruje informáciu do schránky.</li>
<li><strong>T</strong> - Oznámi pozíciu horného okraja objektu. Stlačené dvakrát rýchlo za
sebou skopíruje informáciu do schránky.</li>
<li><strong>V</strong> - Oznámi verziu doplnku. Stlačené dvakrát rýchlo za sebou skopíruje
informáciu do schránky.</li>
<li><strong>W</strong> - oznámi šírku objektu. Stlačené dvakrát rýchlo za sebou skopíruje
informáciu do schránky.</li>
</ul>
<h2>Poznámky</h2>
<ul>
<li>Nefunguje použitie numerického klávesu home, pretože NVDA ho odosiela ako
numerickú číslicu 7. Nepomáha ani použitie doplnkov, ktoré sa snažia
potlačiť toto správanie.</li>
<li><p>Ak použijete funkciu relatívneho rodiča, doplnok nastaví ako relatívneho
rodiča v nasledujúcich situáciách pracovnú plochu:</p>
<ul>
<li>Zameraný objekt a relatívny rodič sú rovnaké.</li>
<li>Relatívny rodič nie je priamim rodičom zameraného objektu.</li>
</ul>
</li>
<li><p>Doplnok nedokáže identifikovať CSS pravidlá, ako výplň, orámovanie,
z-index. Toto by totiž mohlo byť potenciálne nebezpečné pre používateľa.</p></li>
</ul>
<h2>Známe problémy</h2>
<ul>
<li>Zoznam písiem sa vám môže javiť nedostatočný alebo nepoužiteľný. Toto je
spôsobené dostupnými typmi písma v NVDA.</li>
</ul>
<h2>Zoznam zmien</h2>
<h3>20.04</h3>
<ul>
<li>Pridané gesto (home), ktoré zameria definovaného relatívneho rodiča.</li>
</ul>
<h3>20.03</h3>
<ul>
<li>Pridaná skratka alt+r, ktorá oznámi typ prvku. Napríklad tlačidlo, položka
zoznamu, zoznam, začiarkávacie pole, sekcia.</li>
<li>Pridaná skratka shift+s, ktorá oznámi stav prvku. Napríklad má fokus,
vybraté, stlačené, iba na čítanie.</li>
<li>Odstránená podpora pre unikátny identifikátor IAccessible, keďže väčšinou
tento údaj nedáva zmysel.</li>
<li>Odteraz sú verzie číslované v tvare rr.vv, kde RR určuje rok a VV poradové
číslo verzie. Verzia 20.03 je tretia hlavná verzia vydaná v roku 2020.</li>
</ul>
<h3>2020.2</h3>
<ul>
<li>Starting DTK retains the cursor’s current position in web content. If the
object under the caret can’t gain focus, DTK will place focus on the first
available ancestor.</li>
<li>Odstránená stará podpora pre reťazce Unicode.</li>
<li>Odstránená možnosť zapnúť a vypnúť funkcie doplnku z nastavení
doplnku. Skratka alt+windows+k stále funguje.</li>
<li><p>V možnostiach doplnku je možné nastaviť ako budú prezentované informácie o
formátovaní.</p>
<ul>
<li>Nový atribút formátovania pridáte tlačidlom pridať (add). Zadajte platný
názov, tabulátorom ho presuňte do zoznamu a klávesom ESC zavrite dialóg.</li>
<li>Atribút odstránite zo zoznamu jeho vybratým a následným aktivovaním
tlačidla odstrániť (delete attribute).</li>
<li>Atribút premenujte nasledovne: Vyberte ho v zozname. Aktivujte tlačidlo
premenovať (rename attribute). Zadajte nový názov. Tabulátorom ho
presuňte do zoznamu. Klávesom ESC zatvorte dialóg.</li>
<li>Atribút presúvajte vyššie stláčaním tlačidla posunúť hore (move up).</li>
<li>Atribút presúvajte nižšie stláčaním tlačidla posunúť dole (move down).</li>
</ul>
</li>
<li><p>V možnostiach doplnku je možné nastaviť spôsob, akým chcete oznamovať
farby. Oznamovanie sa dá v režime doplnku prepínať aj skratkou ctrl+c.</p>
<ul>
<li><strong>RGB</strong> - červená/zelená/modrá. Definuje farbu kombináciou týchto troch
farieb. Užitočné pri grafickom umení.</li>
<li><strong>Hex</strong> - '#' nasledovaný šiestimi znakmi v rozsahu 1-0 a A-F. Užitočné
pri webových stránkach.</li>
<li><strong>Názov</strong> - Slovná textová informácia. Užitočné na overenie
predchádzajúcich dvoch interpretácií a tiež pre základnú informáciu o
farbe.</li>
</ul>
</li>
</ul>
<h3>2020.1.1</h3>
<ul>
<li>Zlepšená podpora pre znaky unicode.</li>
</ul>
<h3>2020.1.0</h3>
<ul>
<li>Odteraz môžete sledovať len malú časť prostredia nastavením relatívneho
rodiča. Toto nastavíte skratkou ctrl+p. Toto je užitočné pri zisťovaní
veľkosti a pozície objektov. Najprv aktivujte režim doplnku, nájdite
požadovaný objekt, ktorý chcete nastaviť ako relatívneho rodiča, stlačte
ctrl+p a pokračujte v práci.</li>
<li>Písmenom P získate názov relatívneho rodiča. Stlačené dvakrát rýchlo za
sebou skopíruje informáciu do schránky.</li>
<li>Pridaná skratka shift+b na zistenie vzdialenosti spodného okraja objektu
od spodného okraja rodičovského objektu.</li>
<li>Pridaná skratka shift+r na zistenie vzdialenosti pravého okraja objektu od
pravého okraja nadradeného objektu.</li>
<li>Doplnok podporuje konfiguračné profily.</li>
<li>Upravené číslovanie verzií, aby bolo možné doplnok aktualizovať cez
automatizované nástroje.</li>
</ul>
<h3>2020.0 preview</h3>
<ul>
<li>Číslo verzii zmenené na 2020.0 preview aby sme upozornili na prebiehajúcu
implementáciu Python3.</li>
<li>Pridaná kompatibilita s Python3.</li>
<li>Skratka "n" oznamuje názov objektu. Ak názov nie je, oznámi "žiadny".</li>
<li>Pri opätovnom načítaní doplnkov sa nepridá nová položka doplnku do menu s
možnosťami NVDA.</li>
</ul>
<h3>2019.1.2</h3>
<ul>
<li>Doplnok oznamuje pozície a hodnoty veľkosti aj ak sú 0.</li>
<li>Navigácia teraz rešpektuje, ak je nastavené oznamovanie dlhými správami.</li>
<li>Upravené oznamovanie veľkosti a pozície objektov.</li>
<li>Zlepšená stabilita.</li>
</ul>
<h3>2019.1.1</h3>
<ul>
<li>Pri oznamovaní verzie sa doplnok opakovane nenačítava.</li>
<li>Pri inštalácii sú odteraz predvolene funkcie doplnku vypnuté.</li>
<li>V správach je odteraz možné používať aj znaky mimo ascii rozsahu.</li>
<li>Dvojité stlačenie skratiek a, b, c, f, h, l, r, s, t, v, a w neprerušuje
reč NVDA.</li>
</ul>
<h3>2019.1</h3>
<ul>
<li>Opravený problém s vyžadovanou verziou NVDA, ktorá ešte nevyšla.</li>
</ul>
<h3>2019.0 (prvé stabilné vydanie)</h3>
<ul>
<li>Prvé vydanie so základnou navigáciou.</li>
</ul>
Pomocník doplnkovhttp://addons.nvda-project.org/addons/addonsHelp.sk.html2024-02-13T14:38:33Z2019-05-10T03:54:05Z
<p></p>
<h2>Informácie</h2>
<ul>
<li>Authors: Rui Fontes, Ângelo Abrantes, Zougane, Remy, Abdel and
colaboration of James Scholes</li>
<li>Aktualizované 21/03/2022</li>
<li>Stiahnúť <a href="https://www.nvaccess.org/addonStore/legacy?file=addonshelp">stabilnú verziu</a></li>
<li>Kompatibilita: NVDA 2017.2 a novší</li>
</ul>
<h2>Popis</h2>
<p>Doplnok umožňuje zobraziť návody pre doplnky, ktoré máte nainštalované. V
pomocníkovi NVDA pribudnú po nainštalovaní dve položky. Dokumentácia pre
bežiace doplnky: Obsahuje návody pre doplnky a tabuľku klávesových skratiek
pre všetky doplnky. V podmenu Dokumentácia pre zakázané doplnky, nájdete
návody a klávesové skratky pre doplnky, ktoré sú zakázané. Upozorňujeme, že
ovládače pre hlasové výstupy a brailové riadky sa v týchto zoznamoch
nezobrazujú. Dokumentáciu k doplnkom a stav si môžete predvolene zobraziť v
správcovi doplnkov. Skratky doplnkov sú predvolene dostupné v dialógu
Klávesové skratky. V tomto okne však nie sú skratky pre doplnky zoskupené a
nemôžete tu nájsť doplnky s klávesom "Windows".</p>
<h2>Zmeny</h2>
<h3>Verzia 2022.03</h3>
<ul>
<li>Pripravené pre NVDA 2022.1</li>
</ul>
<h3>Verzia 21.05</h3>
<ul>
<li>Pripravené pre NVDA 2021.1</li>
</ul>
<h3>Verzia 2.1</h3>
<ul>
<li>Pripravené pre NVDA 2019.3</li>
</ul>
<h3>Verzia 2.0</h3>
<ul>
<li>Doplnok teraz vytvorí v pomocníkovi dve podmenu.</li>
<li>V menu "dokumentácia pre bežiace doplnky" pribudla položka na zobrazenie
klávesových skratiek doplnkov v tabuľke.</li>
<li>V podmenu "dokumentácia pre zakázané doplnky" sú len návodyk doplnkom,
ktoré sú aktuálne zakázané.</li>
<li>Upozorňujeme, že ovládače pre braillovské riadky a hlasové výstupy nie sú
zobrazené.</li>
<li>Doplnky sú teraz reprezentované ich zhrnutím a nie ich menom.</li>
<li>vylepšenia v kóde.</li>
</ul>
<h3>Verzia 1.2</h3>
<ul>
<li>Opravené menšie chyby;</li>
<li>Opravené importovanie podmenu zo súhrnu doplnku</li>
<li>Vynútenie otvorenia dokumentácie v predvolenom prehliadači, ak je to
možné, v novom okne.</li>
</ul>
<h3>Verzia 1.1</h3>
<ul>
<li>Kompatibilita s pithonom 3`;</li>
<li>Nový spôsob pridania podmenu;</li>
<li>Ak existuje preklad, Názvy podmenu sú teraz v predvolenom jazyku NVDA.</li>
</ul>
<h3>Verzia 1.0</h3>
<ul>
<li>Prvé vydanie vytvorili Zoudane, Rémy a Addel, aktualizované tak, aby
spolupracovalo s NVDA 2019.1</li>
</ul>
Informácie o znakuhttp://addons.nvda-project.org/addons/charInfo.sk.html2024-02-15T10:17:43Z2019-04-25T19:09:30Z
<ul>
<li>Author: Cyrille Bougot</li>
<li>NVDA compatibility: 2022.3.3 and beyond</li>
<li>Stiahnúť <a href="https://www.nvaccess.org/addonStore/legacy?file=charInfo">stabilnú verziu</a></li>
</ul>
<p>This add-on allows to present in a message various information about a
character. It also allows to customize the information reported on a
character when using review cursor character navigation commands or multiple
presses of the review character command.</p>
<h3>Features</h3>
<ul>
<li>Display detailed information on a character, e.g. Unicode name, number,
CLDR, symbol name, etc.</li>
<li>This information can be displayed either at the location of the review
cursor or at the location of the system cursor.</li>
<li>Customize the reported information when pressing <code>numpad2</code>.</li>
<li>Use the same custom information when moving the review cursor by
character.</li>
</ul>
<h2>Klávesové skratky</h2>
<ul>
<li><code>Numpad2</code> (all keyboard layouts) or <code>NVDA+.</code> (laptop layout): when pressed
4 times, displays information about the character of the current navigator
object where the review cursor is situated. This command can also be
customized in the settings of the add-on.</li>
<li>Unassigned: Presents a message with detailed information on the character
where the review cursor is situated. If you feel uncomfortable with the
four press gesture, you may use this command instead.</li>
<li>Unassigned: Presents a message with detailed information on the character
at the position of the caret (works only in places where there is a
caret).</li>
<li>Unassigned: Opens Character Information add-on settings.</li>
</ul>
<p>The unassigned commands need first to be assigned in the Input gestures
dialog to be used.</p>
<h2>Detailed information on a character</h2>
<p>The presented information include the following sections:</p>
<ul>
<li>Unicode: information from Unicode norm, i.e. name, CLDR name, value,
block, etc.</li>
<li>MS font, only for characters written with proprietary Microsoft fonts
(Symbol, Wingding 1, 2, 3 and Webding): name and information about the
equivalent Unicode character.</li>
<li>NVDA symbol description: information allowing to understand how NVDA
reports the symbol description. NVDA uses the information in the top most
rows containing available information to provide the description of a
symbol.</li>
<li>NVDA character description: information allowing to understand how NVDA
reports the character description (e.g. "alpha" for "A"). NVDA uses the
information in the top most rows containing available information to
provide the description of a character.</li>
</ul>
<p>The provided information in the Unicode section is in English since it is
part of Unicode norm. If a local translation exists for this add-on, the
information is also provided alongside with English.</p>
<h2>Settings</h2>
<p>This add-on has its own category in NVDA's settings dialog where you can
configure the following options.</p>
<h3>Action for multiple presses of the report review character command</h3>
<p>The three combo boxes of this group allow to customize what is reported by
the report review character command (<code>numpad2</code>) when using two, three or
four presses. By default, NVDA reports the character description on second
press and its numeric value, decimal and hexadecimal, on third press. You
can change what is reported on the character at the position of the review
cursor upon multiple presses. For example, you can report its CLDR English
name on second press, its Unicode name on third press and display detailed
information on it on fourth press.</p>
<h3>Remember these action during character navigation</h3>
<p>When you have reported specific information with the report review character
command (<code>numpad2</code>) called multiple times, you may want to continue
reporting the same information while navigating with the review cursor
(<code>numpad1</code> and <code>numpad3</code>). Checking this option will allow you to do it, as
long as you navigate with the review cursor by character just after a
multiple press of <code>numpad2</code>.</p>
<h2>Zmeny</h2>
<h3>Version 3.0</h3>
<ul>
<li>It is now possible to configure the property reported for the character
under the review cursor upon multiple presses on <code>numpad2</code>. Optionally,
after having used multiple press on <code>numpad2</code>, the last reported property
can also be reported as long as you navigate by character with the review
cursor (<code>numpad1</code> and <code>numpad3</code>).</li>
<li>Prepares compatibility with NVDA 2024.1: speech on-demand support.</li>
<li>Addresses potential security issues related to <a>GHSA-xg6w-23rw-39r8</a>
when using the add-on with older versions of NVDA. However, it is
recommended to use NVDA 2023.3.3 or higher.</li>
</ul>
<h3>Version 2.6</h3>
<ul>
<li>Update to Unicode 15.1.</li>
<li>Adds support for Python 3.11 to prepare compatibility with NVDA 2024.1.</li>
<li>Note: From now on, translation updates will not appear anymore in the
change log.</li>
</ul>
<h3>Version 2.5</h3>
<ul>
<li>Fixed import error with last NVDA alpha versions, NVDA 2023.2 development
cycle (contribution Noelia Ruiz Mart�nez).</li>
</ul>
<h3>Version 2.4</h3>
<ul>
<li>Updated localizations.</li>
</ul>
<h3>Version 2.3</h3>
<ul>
<li>Updated localizations.</li>
</ul>
<h3>Version 2.2</h3>
<ul>
<li>Removed the dev channel.</li>
<li>Updated localizations.</li>
</ul>
<h3>Version 2.1</h3>
<ul>
<li>Fixed some bugs preventing the character information report to be
displayed when some options were used.</li>
<li>Updated localizations.</li>
</ul>
<h3>Version 2.0</h3>
<ul>
<li>Enhanced the character information report with information on NVDA symbol
and NVDA character description.</li>
<li>Added the support of compound character, e.g. letters with diacritic
consisting in two or more Unicode characters.</li>
<li>Update to Unicode 15.0</li>
<li>Updated French block data.</li>
<li>Viewing character information is not allowed on lock screen and secure
screens.</li>
<li>On Windows lock screen, the script to review the current character can now
operate normally (single, double or triple press).</li>
<li>Compatibility with NVDA 2023.1.</li>
<li>Drops compatibility with NVDA below 2022.3.3. The last version compatible
with NVDA 2019.3 is the <a>1.8</a>.</li>
<li>Update localizations.</li>
</ul>
<h3>Version 1.8</h3>
<ul>
<li>Update to Unicode 14.0.</li>
<li>Compatibility with NVDA 2022.1.</li>
<li>Drops compatibility with NVDA below 2019.3. The last version compatible
with NVDA 2017.3 is the <a>1.7</a>.</li>
<li>The release is now performed thanks to a GitHub action instead of
appVeyor.</li>
<li>Update localizations.</li>
</ul>
<h3>Version 1.7</h3>
<ul>
<li>Added localizations.</li>
</ul>
<h3>Version 1.6</h3>
<ul>
<li>Compatibility NVDA 2021.1.</li>
</ul>
<h3>Version 1.5</h3>
<ul>
<li>Prepare compatibility with NVDA 2021.1 (contribution Lukasz Golonka).</li>
<li>Update along with last modifications on add-on template.</li>
</ul>
<h3>Version 1.4</h3>
<ul>
<li>Added a script to get information for the character at the caret position
(contribution Lukasz Golonka).</li>
<li>Update to Unicode 13.0.</li>
</ul>
<h3>Verzia 1.3</h3>
<ul>
<li>Opravuje chyby, ktoré nastávali v NVDA 2019.3.</li>
</ul>
<h3>Verzia 1.2</h3>
<ul>
<li>Poskytuje doplňujúce informácie o znakoch napísaných v Microsoft fontoch.</li>
</ul>
<h3>Verzia 1.1</h3>
<ul>
<li>Podporuje novšie verzie NVDA (Kompatibilný s Python 2 a 3)</li>
<li>vydania teraz prechádzajú cez appveyor</li>
</ul>
<h3>Verzia 1.0</h3>
<ul>
<li>Prvé vydanie.</li>
</ul>
<p>https://github.com/CyrilleB79/charInfo/releases/download/V1.7/charInfo-1.7.nvda-addon</p>
<p>https://github.com/CyrilleB79/charInfo/releases/download/V1.8/charInfo-1.8.nvda-addon</p>
<p>https://github.com/nvaccess/nvda/security/advisories/GHSA-xg6w-23rw-39r8#event-132994</p>
Štatistika textuhttp://addons.nvda-project.org/addons/wordCount.sk.html2023-05-10T20:38:33Z2019-04-08T16:02:17Z
<ul>
<li>Authors: Rui Fontes <a href="mailto:rui.fontes@tiflotecnia.com">rui.fontes@tiflotecnia.com</a> and Angelo Abrantes
<a href="mailto:ampa4374@gmail.com">ampa4374@gmail.com</a></li>
<li>Updated in 21/03/2022</li>
<li>Stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=wordCount">stabilnú verziu</a></li>
<li>Compatibility: NVDA version 2019.3 and beyond</li>
</ul>
<h2>Použitie</h2>
<p>This addon announces the number of words, characters, paragraphs and lines
of the selected text by pressing Control+Shift+F12. It also create a
ordered list of the words used and allow to display the lines containing a
word.</p>
<p>In any text editor, or in a virtual document, for example in a web browser,
PDF, email body, etc., select the desired text using the usual text
selection commands and press Control+Shift+f12.</p>
<p>To get a list of words used, just press Control+Shift+f11.</p>
<p>This commands can be modified in the "Input gestures" dialog in the "Text
editing" section.</p>
Počasie Plushttp://addons.nvda-project.org/addons/Weather_Plus.sk.html2024-02-13T14:38:42Z2019-03-16T05:24:15Z
<ul>
<li>Autor: Adriano Barbieri</li>
<li>NVDA compatibility: 2017.3 to beyond</li>
<li>Stiahnuť: <a href="https://www.nvaccess.org/addonStore/legacy?file=Weather_Plus">Stabilnú verziu</a></li>
</ul>
<h1>O doplnku</h1>
<ul>
<li>This plugin adds local temperature and forecasts to 24 hours up to 2
additional days and hourlyforecast for NVDA.</li>
<li>Copyright (C) <a href="mailto:adrianobarb@yahoo.it">Adriano Barbieri</a></li>
<li>Vydané pod licenciou GNU GPL (General Public License) verzia 2</li>
<li>Doplnok využíva tieto služby:</li>
<li><a href="https://www.weatherapi.com/">https://www.weatherapi.com/</a></li>
<li><a href="http://www.geonames.org/">http://www.geonames.org/</a></li>
<li><a href="http://veloroutes.org/elevation/">http://veloroutes.org/elevation/</a></li>
<li><a href="http://www.nvda.it/">http://www.nvda.it/</a></li>
</ul>
<h1>POUŽITIE:</h1>
<ul>
<li>nvda+W: Oznámi informáciu o aktuálnom počasí.</li>
<li>Press NVDA+shift+W to get 24 hours forecast and forecast up to 2 days.</li>
<li>Press NVDA+shift+W twice to get hourlyforecast of temperature and
atmospheric conditions.</li>
<li>NVDA + shift + ctrl + w: Umožňuje nastaviť dočasné mesto.</li>
<li>NVDA + shift + ctrl + alt + w: Otvorí nastavenia doplnku.</li>
<li>NVDA + alt + w: Oznámi dátum a čas poslednej aktualizácie informácií o
počasí.</li>
<li>ctrl+ shift + w: prepína medzi oznamovaním teploty v stupňoch Celsia alebo
Farenheita.</li>
</ul>
<h1>Nastavenia:</h1>
<ul>
<li>You must set the Weather Plus addon before its first use! Go to the Preferences submenu, Weather Plus Settings submenu and choose one of the following options:</li>
<li>Set and Manage Your Cities... - Displays or allows to set the current city from a list.</li>
<li>Set a temporary city... - Displays and allows to set one temporary city from a list if available.</li>
<li>Documentation - Opens the help file for the current language.</li>
<li>Check for Update... - Notifies about the availability of the new version.</li>
</ul>
<p>Nové mesto na sledovanie pridáte nasledovne:</p>
<ul>
<li>Aktivujte položku Spravovať mestá.</li>
<li>Zobrazí sa táto správa: Predvolené mesto nie je. f1: Pomocník, f2: Oznámy
aktuálne vybratú záložku, f3: presunie kurzor na editačné pole alebo
zoznam, f4: Nastaví dĺžku predpovede počasia, F5: Nastavenie úrovne
hlasitosti.</li>
<li>In the edit box, enter a City or choose one from the list, if
available. Note: The F5 key is available if the sound effects are
activated.</li>
<li>Po aktivovaní položky spravovať mestá sú dostupné tieto možnosti:</li>
<li>Test - Test the validity of the city and find the data of it.</li>
<li>Pridať: pridá aktuálne mesto do zoznamu. Toto tlačidlo sa dá aktivovať, ak
je vybraté mesto zo zoznamu, a ak ste zadané mesto otestovali.</li>
<li>Podrobnosti: zobrazuje informácie o aktuálnom meste. Toto tlačidlo sa dá
aktivovať, ak je zo zoznamu vybraté mesto alebo ak ste ho už otestovali.</li>
<li>Nastavenie zvukových efektov: Umožňuje definovať oblasť s cieľom
prispôsobiť zvukové efekty. Toto tlačidlo sa dá aktivovať, ak sú zvukové
efekty nainštalované a aktivované a ak je zo zoznamu vybraté mesto.</li>
<li>Predvolené mesto: Ak nastavíte mesto ako predvolené, použije sa pri každom
reštarte doplnku. Toto tlačidlo sa dá aktivovať, keď vyberiete mesto,
ktoré bolo predtým vložené do zoznamu a nie je zatiaľ predvolené alebo ak
prešlo testovaním.</li>
<li>Odstrániť: Odstráni aktuálne mesto zo zoznamu. Toto tlačidlo sa dá
aktivovať, ak vyberiete mesto, ktoré bolo predtým vložené do zoznamu.</li>
<li>Premenovať: Premenuje aktuálne mesto. Toto tlačidlo sa dá aktivovať, ak
vyberiete mesto, ktoré bolo predtým vložené do zoznamu.</li>
<li>Importovať: Toto tlačidlo umožňuje importovať mestá z iného zoznamu miest
s príponou * .zipcodes. Počas importu môžete začiarknuť mestá, ktoré
chcete importovať.</li>
<li>Exportovať: Umožňuje vám uložiť mestá do súboru s príponou *
.zipcodes. Exportovať môžete len vtedy, ak je v zozname aspoň jedno mesto.</li>
<li>hourly forecast setting... - This button allows you to choose the contents
of the hourly forecast report.</li>
<li>Jednotky merania teploty: Pomocou prepínača vyberte medzi stupňami Celzia
(predvolené), Fahrenheita alebo Kelvina.</li>
<li>Zobraziť stupne ako: Pomocou prepínača vyberte medzi Celzia <code>-</code>
Fahrenheita <code>-</code> Kelvina (redvolené) C<code>-</code> F <code>-</code> K alebo neurčovať.</li>
<li>Combo box: Weather Forecasts up to days: 1; you can choose between 1 to 3
(1 days by default)</li>
<li>Combo box: API response language: English, en; you can choose the language
of the weather conditions text.</li>
<li>Dostupné sú aj tieto začiarkávacie polia:</li>
<li>kopírovať predpoveď počasia, aktuálne počasie a informácie o meste do
schránky - predvolene vypnáté</li>
<li>Predpoveď oznamovať aj Zvukom: Po začiarknutí môžete spravovať zvukové
efekty. Ak sú nainštalované zvukové efekty a pole je začiarknuté, môžete
upravovať hlasitosť zvukov klávesom F5.</li>
<li>Pribudne tiež začiarkávacie políčko Neprehrávať zvuky Prostredia.</li>
<li>Môžete zmeniť celkovú úroveň hlasitosti, prípadne upraviť hlasitosť pre
jednotlivé udalosti. Predvolene nie je začiarknuté.</li>
<li>Neprehrávať zvuky Prostredia: Táto možnosť je k dispozícii, ak sú zvukové
efekty povolené. Po začiarknutí sa budú prehrávať len zvuky počasia (dážď,
búrka, vietor) a nie zvuky prostredia. Predvolene je vypnuté.</li>
<li>Používať 24-hodinový formát: Ak je odčiarknuté, oznamuje čas v
12-hodinovom formáte, napríklad 12 AM <code>-</code> 12 PM. Predvolene je zapnuté.</li>
<li>Povoliť texty Pomocníka v oknách s nastaveniami: Predvolene je zapnuté.</li>
<li>Oznamovať poveternostné podmienky: Predvolene je vypnuté. Po zapnutí budú
dostupné tieto možnosti:</li>
<li>Oznamovať smer vetra: bude oznamovať pri počasí aj smer vetra. Predvolene
zapnuté.</li>
<li>Oznamovať rýchlosť vetra: Bude oznamovať rýchlosť vetra v mýľach alebo
kilometroch za hodinu. Predvolene zapnuté.</li>
<li>Oznamovať rýchlosť vetra v metroch za sekundu: Predvolene zapnuté.</li>
<li>Add wind gust speed of the wind; checkbox checked (by default)</li>
<li>Oznamovať pocitovú teplotu: Predvolene zapnuté.</li>
<li>Oznamovať atmosferické informácie: Predvolene je vypnuté. Po zapnutí budú
dostupné tieto možnosti:</li>
<li>Oznamovať vlhkosť: Oznamuje vlhkosť vzduchu v percentách. Predvolene
zapnuté.</li>
<li>Oznamovať Viditeľnosť: Oznamuje viditeľnosť v míľach alebo
kilometroch. Predvolene zapnuté.</li>
<li>Oznamovať hodnotu Atmosferického tlaku: Oznamuje stav tlaku v milibaroch
alebo palcoch ortuti. Predvolene je zapnuté. Po začiarknutí je tiež možné
začiarknuť oznamovanie tlaku v milimetroch ortuti.</li>
<li>Oznamovať barometrický tlak: Predvolene zapnuté.</li>
<li>Add cloudiness value; check box checked (by default)</li>
<li>Add precipitation value; check box checked (by default)</li>
<li>Add ultraviolet radiation value; check box checked (by default)</li>
<li>Read astronomical information; indicates the time of sunrise and sunset
and the time of moonrise and moonset. Checkbox not checked (by default)</li>
<li>Desatinné čísla oddeľovať čiarkou: Ak je začiarknuté, použije na oddelenie
celých a desatinných čísel desatinnú čiarku (,). Predvolene je vypnuté a
používa sa bodka (.)</li>
<li>Skontrolovať aktualizácie: Skontroluje dostupnosť novej verzie doplnku.</li>
<li>Nastavenia uložíte tlačidlom OK a zrušíte tlačidlom Zrušiť.</li>
<li>Ak ste upravili zoznam s mestami a aktivujete tlačidlo Zrušiť, doplnok vás
upozorní, že ste zabudli uložiť zmeny. Nastavenia sa ukladajú do súborov:</li>
<li>"Weather.ini": prvotné nastavenia doplnku.</li>
<li>"Weather.volumes": Nastavenia hlasitosti pre jednotlivé udalosti.</li>
<li>"Weather.zipcodes": zoznam miest.</li>
<li>"Weather.default": Your default city.</li>
<li>"Weather_searchkey": Uložené vyhľadávané reťazce.</li>
</ul>
<hr />
Rozšírenie pre rýchlu navigáciuhttp://addons.nvda-project.org/addons/browsernav.sk.html2023-05-23T22:52:53Z2019-02-24T23:29:19Z
<ul>
<li>Autor: Tony Malykh</li>
<li>NVDA compatibility: from 2019.3 to 2023.1</li>
<li>Stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=browsernav">stable version</a></li>
</ul>
<h1>Rozšírenie pre rýchlu navigáciu</h1>
<p>This add-on provides NVDA users powerful navigation commands in browser
mode. It works in web browsers, as well as any other applications that
support NVDA browse mode, such as Word documents and email clients.</p>
<p>For example, with BrowserNav you can find vertically aligned paragraphs,
that is paragraphs with the same horizontal offset. This can be used to read
hierarchical trees of comments or malformed HTML tables.</p>
<p>You can also find paragraphs written in the same font size or style.</p>
<p>BrowserNav also provides new QuickNav commands: P for next paragraph and Y
for next tab.</p>
<h2>Download</h2>
<ul>
<li>Current stable version:
<a href="https://github.com/mltony/nvda-browser-nav/releases/latest/download/browsernav.nvda-addon">BrowserNav</a></li>
<li>Last Python 2 version (compatible with NVDA 2019.2 and prior): <a href="https://github.com/mltony/nvda-browser-nav/releases/download/v1.1/BrowserNav-1.1.nvda-addon">BrowserNav
v1.1</a></li>
</ul>
<h2>Usage in browsers and other programs that support browse mode</h2>
<p>Môžete využiť navigáciu po odsekoch, pričom môžete hľadať odseky s rovnakým
odsadením, typom písma alebo štýlom.</p>
<ul>
<li>Ak chcete hľadať odseky s rovnakým odsadením, môžete nájsť odseky s
vertikálnym odsadením. Skratkami nvda+šípka hore alebo dole skáčete po
odsekoch s takým odsadením, ktoré má aj aktuálny odsek. Toto je užitočné
pri čítaní komentárov, ktoré majú rôznu úroveň v strome (napríklad na
reddit.com). Takto môžete skákať napríklad medzi komentármi prvej úrovne a
preskakovať odpovede na komentáre.</li>
<li>Môžete tiež prechádzať po odsekoch s rovnakou veľkosťou písma alebo po
odsekoch, v ktorých je menšie alebo väčšie písmo.</li>
<li>Môžete tiež prechádzať po odsekoch s rovnakým písmom ale inou veľkosťou.</li>
</ul>
<p>BrowserNav rotor is used to switch between these options. Depending on the
setting of this rotor, BrowserNav will indicate with beeps either horizontal
offset or font size of currently selected item. In addition, BrowserNav will
crackle on QuickNav commands to indicate how much text has been skipped over
(this feature is only available in Google Chrome and Firefox).</p>
<p>BrowserNav works in any browser supported by NVDA. Although some features
may not be available in all browsers. BrowserNav also works in other
applications that support NVDA browse mode, such as Word documents and email
clients.</p>
<h2>Klávesové skratky:</h2>
<ul>
<li>NVDA+šípky hore a dole: Prechádza medzi odsekmi s rovnakým odsadením alebo
veľkosťou písma.</li>
<li>NVDA+Alt+Home or NVDA+alt+LeftArrow: Jump to previous paragraph with
lesser offset or greater font size (parent paragraph).</li>
<li>NVDA+Alt+End or NVDA+Control+alt+LeftArrow: Jump to next paragraph with
lesser offset or greater font size (next parent paragraph).</li>
<li>NVDA+Alt+PageDown or NVDA+Alt+RightArrow: Jump to next paragraph with
greater offset or smaller font size (child paragraph).</li>
<li>NVDA+Alt+PageUp or NVDA+Control+Alt+RightArrow: Jump to previous paragraph
with greater offset or smaller font size (previous child paragraph).</li>
<li>NVDA+O: prepína medzi zobrazením odsadenia, písmom a písmom a štýlom.</li>
<li>Y a shift+Y: Skáče po záložkách.</li>
<li>P or Shift+P: Jump to next or previous dialog.</li>
<li>Z or Shift+Z: Jump to next or previous menu.</li>
<li>` orShift+` (backquote or tilde): Jump to next or previous format
change.</li>
<li>\ or Shift+\ (backslash): Scroll up or down to reveal each page element;
can be useful in dynamic web pages to load all the elements; also can be
useful in infinite scroll webpages to load the next chunk.</li>
<li>0 or Shift+0: Jump to next or previous tree view.</li>
<li>9 or Shift+9: Jump to next or previous tool bar.</li>
<li>NVDA+Shift+LeftArrow: Go back to previous location of cursor within
current document.</li>
<li>NVDA+E: edit semi-accessible edit boxes - see corresponding section below.</li>
<li>T or Shift+T: jump to next or previous table, but place the cursor in the
first cell. Sometimes NVDA puts the cursor just before the first cell and
BrowserNav fixes this behavior.</li>
</ul>
<h2>Bookmarks</h2>
<p>BrowserNav 2.0 introduces a new set of bookmark features .</p>
<h3>Bookmark keystrokes</h3>
<ul>
<li>NVDA+J: Show quickJump popup menu.</li>
<li>J or Shift+J: Jump to next or previous QuickJump bookmark.</li>
<li>/ and Control+/: Toggle SkipClutter mode for navigating by line (Up and
Down arrows) and by paragraph (Control+Up and Control+Down arrows)
correspondingly.</li>
<li>Alt+J: click all AutoClick bookmarks on current page.</li>
<li>Alt+1, Alt+2, ..., Alt+0: jump to next hierarchical bookmark of
corresponding level. 0 corresponds to level 10.</li>
<li>Shift+Alt+1, Shift+Alt+2, ..., Shift+Alt+0: jump to previous hierarchical
bookmark.</li>
<li>Alt+<code>or Shift+Alt+</code>: jump to next or previous hierarchical bookmark of
any level.</li>
</ul>
<h3>Sites</h3>
<p>The first thing you would need to configure is the site where you want to
create bookmarks. In most cases you would want to specify match type to be
either domain match or Match domain and its subdomains. To illustrate the
latter option, you can specify:</p>
<ul>
<li>URL: amazon.com</li>
<li>Match type: Match domain and its subdomains</li>
<li>This will match amazon.com, smile.amazon.com and all other *.amazon.com
domains.</li>
</ul>
<p>If you need finer control, you can also specify exact URL or define a
regular expression for URL.</p>
<p>Because of this flexible definition, on every given webpage multiple
QuickJump sites might be active at the same time.</p>
<h3>Bookmark types</h3>
<p>Once you have configured site definition, you can proceed to define some
bookmarks on it.</p>
<p>BrowserNav currently supports four types of bookmarks:</p>
<ul>
<li>QuickJump bookmarks: you can jump to them by pressing J or Shift+J.</li>
<li>SkipClutter bookmarks: These bookmarks are skipped automatically when
navigating by line (Up/Down arrow) or by paragraph (Control+Up/Down
arrows). This allows to hide clutter on webpages, such as empty lines,
timestamps and any other redundant information. The information is not
removed completely, SkipClutter can be temporarily disabled via / or
Control+/ commands. By default SkipClutter skips empty paragraphs on all
websites.</li>
<li>AutoClick bookmarks: you can mark clickable elements, such as links,
buttons or checkboxes to be autoClick bookmarks. Then by pressing Alt+J
you can quickly press all autoClick bookmarks on current page with a
single keystroke without moving the cursor. This can come in handy to
press a frequently used button on a website, such as play button on
YouTube or Mute button on video-conferencing websites.</li>
<li>Hierarchical bookmarks: this is similar to quickJump bookmarks, but this
takes into account horizontal offset of a bookmark. Sites like Reddit and
Hacker News have a hierarchical tree of comments, that was pretty
challenging to efficiently navigate for screenreader users. On these
websites you can mark comments as a hierarchical bookmark and then you can
navigate between them By pressing Alt+digit or Shift+Alt+ditgit, where
digit stands for number row 1,2,3,...0 - that is the level of the
comment. By default BrowserNav has hierarchical bookmarks configured for
Hacker News and old.reddit.com; it was however too difficult to configure
them for modern reddit.com website since there doesn't appear to be easily
searcheable paragraph that would identify comments.</li>
</ul>
<h3>Creating a new bookmark</h3>
<p>Once you have configured a site, the easiest way to create a new bookmark would be to navigate to the desired paragraph in the document , press NVDA+J to show bookmarks context menu and select Bookmarks > Create new bookmark for site ...</p>
<p>Bookmark configuration dialog will open. You can now customize bookmark. You
can change how text is matched (e.g. string match or regular expression).</p>
<p>Other options in this dialog:</p>
<ul>
<li>Category: defines bookmark type.</li>
<li>Display name: optional name of this bookmark for better readability. This
just gives a better name so that you can identify this bookmark in a long
list of bookmarks.</li>
<li>Spoken message when bookmark is found: optional message to speak every
time you hit this bookmark in the document.</li>
<li>Offset in paragraphs: after finding matched text BrowserNav will then
shift cursor by this many paragraphs forward or back. This can be useful
for example if target text that you want to jump to doesn't contain any
common text that can be matched (e.g. forum post), but a preceding
paragraph contains a matchable word (e.g. upvote). In this case you can
match the word upvote and specify offset=1, to place the cursor on the
first paragraph of the post instead of the word upvote.</li>
<li>Attributes: space-separated list of paragraph attributes that are matched
against. The list of available attributes for current paragraph is
available in the next form field. List of attributes is prepopulated with
some common roles and typically you don't need to edit it.</li>
<li>Available attributes in current paragraph : these are all the attributes
found in current paragraph. You can select and press Space to add them to
the list of matched attributes.</li>
</ul>
<h3>Advanced site options</h3>
<p>In site configuration dialog you can specify a number of advanced options:</p>
<ul>
<li>Display name: optional display name for better readability in the list of
sites.</li>
<li>Focus mode: this allows to override default handling of focus events in
NVDA. Certain websites misuse focus events. In order to use them more
conveniently, you can either ignore focus events, or alternatively disable
automatic entering of focus mode when a focus event is received.</li>
<li>Live region mode: Some website misuse live regions. This option allows to
disable live region announcements for current website only.</li>
<li>Debug beep mode: this is mostly good for debugging purposes. You can make
NVDA beep when certain event (focus, live region update or successful
autoClick) happened.</li>
<li>AutoClick options: when you set up QuickClick bookmark, this allows you to
configure this bookmark to be pressed automatically after a certain delay
once the website is fully loaded. Another option allows BrowserNav to keep
monitoring the website and whenever any more of such QuickClick bookmarks
appear, it would click them automatically still. Please note that this
feature is experimental.</li>
</ul>
<h3>Configuration</h3>
<p>Bookmark definitions are stored in NVDA configuration directory in file
<code>browserNavRules.json</code>. You can edit this file manually or share it with
someone.</p>
<p>NVDA Configuration directory can be found by opening Start menu and typing:
Explore NVDA user configuration directory.</p>
<p>BrowserNav comes with default configuration file with sample bookmarks.</p>
<h2>Editing semi-accessible edit boxes</h2>
<p>Many modern web applications, notably Jupyter among others, use edit boxes,
that are not that accessible, e.g. they appear blank, but you can copy text
in and out of them using Control+A, Control+C and Control+V keystrokes.</p>
<p>BrowserNav offers an experimental feature to edit those edit boxes in a more
convenient way. IN order to use it:</p>
<ol>
<li>Find edit box in the browser window.</li>
<li>Press NVDA+E.</li>
<li>A new window will appear with the contents of that edit box.</li>
<li>Edit the contents of that edit box in this window.</li>
<li>Once you're done, you can press Escape to close the accessible edit
window and update the edit box on the web page.</li>
<li>Alternatively, you can press Control+Enter, Shift+Enter or
Alt+Enter. This will close the edit window, update the edit box and pass
on the gesture on to the web application.</li>
<li>In order to close the edit window without saving changes, press Alt+F4.</li>
<li>At any time, if the contents of previously edited text is lost, press
NVDA+Control+E to copy it to clipboard.</li>
</ol>
<p>Notes:</p>
<ul>
<li>Do not change the state of the browser, e.g. do not switch tabs and do not
focus other elements within the tab while edit text window is open. Doing
so will prevent BrowserNav from correctly updating text in the edit box.</li>
<li>Make sure to release Control, Shift or Alt modifiers quickly affter
pressing Control+Enter, Shift+Enter, or Alt+Enter. Holding them for over a
second will cause problems.</li>
<li>This feature is currently experimental. Please expect only about 90-95%
success rate.</li>
<li>It has been thoroughly tested with Google Chrome and Firefox. It might
work in other browsers, but there's a higher chance of issues, such as
information loss.</li>
</ul>
Rozšírená podpora pre Microsoft Outlookhttp://addons.nvda-project.org/addons/outlookExtended.sk.html2023-05-10T20:38:33Z2019-01-17T04:16:47Z
<ul>
<li>Autori: Cyrille Bougot, Ralf Kefferpuetz</li>
<li>NVDA compatibility: 2019.3 and beyond</li>
<li>Stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=outlookextended">stabilnú verziu</a></li>
</ul>
<p>This addon improves the use of Microsoft Outlook by vocalizing some native
commands, adding extra commands and adds extra features.</p>
<h2>Klávesové skratky</h2>
<ul>
<li>Alt+1 do Alt+9, Alt+0, Alt+-, Alt+=: Oznamuje hlavičky pre správy,
udalosti v kalendári alebo zozname úloh. Stlačené dvakrát rýchlo za sebou
presunie na hlavičku fokus, ak je to možné.</li>
<li>NVDA+shift+I (rozloženie desktop) / NVDA+ctrl+shift+I (rozloženie laptop):
Oznámi informačný panel v správe, udalosti v kalendári alebo v
úlohe. Stlačené dvakrát rýchlo za sebou presunie na informačný panel
fokus. Stlačené trikrát rýchlo za sebou skopíruje informáciu do schránky.</li>
<li>NVDA+shift+A (rozloženie desktop) / NVDA+ctrl+shift+A (rozloženie laptop):
Oznámi počet a názvy príloh v okne správy. Stlačené dvakrát rýchlo za
sebou presunie fokus na prílohy.</li>
<li>NVDA+shift+M (desktop) a NVDA+ctrl+shift+M (laptop): Presunie fokus do
tela správy</li>
<li>NVDA+shift+N (desktop layout) / NVDA+control+shift+N (laptop layout):
Reports the notification in a message window. If pressed twice, moves the
focus to it. If pressed three times, copies its content to the clipboard.</li>
<li>Ctrl+q: Označí správu alebo vybraté správy v zozname správ ako prečítané.</li>
<li>Ctrl+u: Označí správu alebo vybraté správy v zozname správ ako
neprečítané.</li>
</ul>
<h2>Additional improvements</h2>
<ul>
<li>When the recipient you have entered in the To, Cc or Bcc fields sends
automatic out of office replies or is not present anymore on the Exchange
server, Outlook report it in the notification area. In this notification
area, you also have buttons to remove the address of these recipients.
This add-on will inform you with a ding when this notification area
appear, disappear or be updated. You can then press NVDA+shif+N /
NVDA+control+shift+N once to have it read and twice to jump to this
area. Then move with arrows on the recipient buttons and press a button to
remove the corresponding recipient.</li>
<li>In the address book's result list, you can use horizontal table navigation
commands to read the content of each column.</li>
</ul>
<h2>Poznámky</h2>
<p>Všetky skratky je možné upraviť v dialógu NVDA Klávesové skratky. Skratky
budete chcieť zmeniť v nasledujúcich situáciách:</p>
<ul>
<li>Skratky na označenie správ ako prečítaných a neprečítaných sú predvolene
pre anglickú verziu Outlooku. Vo vašej verzii Outlooku môžu byť tieto
skratky iné a preto je vhodné ih upraviť aj v doplnku.</li>
<li>Skratky na čítanie hlavičiek sú vytvorené tak, aby ste mohli použiť kláves
alt s prvým radom kláves na klávesnici. Toto ale môže byť potrebné
upraviť, ak používate inú ako anglickú klávesnicu.</li>
</ul>
<h2>Zoznam zmien</h2>
<h3>Version 2.1</h3>
<ul>
<li>Removed the dev channel.</li>
<li>Updated localizations.</li>
</ul>
<h3>Version 2.0</h3>
<ul>
<li>Improve the user experience with notifications appearing when entering
e-mail addresses which are not valid anymore or which send automatic out
of office replies: a sound alerts when such notifications appear or are
updated, a gesture allows to read it or to move to it, and navigation in
this area with arrows is made more easy.</li>
</ul>
<h3>Version 1.10</h3>
<ul>
<li>Compatibility with NVDA 2023.1.</li>
<li>Updated localizations.</li>
</ul>
<h3>Version 1.9</h3>
<ul>
<li>Compatibility with NVDA 2022.1.</li>
<li>Dropped compatibility for versions of NVDA below 2019.3.</li>
<li>The release is now performed thanks to a GitHub action instead of
appVeyor.</li>
<li>Fixed the announcement when the user triple-presses alt+number shortcuts.</li>
<li>Fixed an issue preventing from reading calendar items headers of some
versions of Outlook 365.</li>
<li>Improvement of the test environment of the add-on: navigation in the fake
root dialog.</li>
<li>Updated localizations.</li>
</ul>
<h3>Version 1.8</h3>
<ul>
<li>Updated localizations.</li>
<li>Ensure that all the variable from the original Outlook appModule are still
available.</li>
</ul>
<h3>Version 1.7</h3>
<ul>
<li>Update compatibility for NVDA 2021.1.</li>
<li>Updated localizations.</li>
</ul>
<h3>Version 1.6</h3>
<ul>
<li>Fixed various issues when reading messages headers in Outlook 365.</li>
<li>Fixed an error in announce attachments script when a braille keyboard is
used.</li>
<li>Added a unit test framework.</li>
<li>Updated localizations.</li>
</ul>
<h3>Verzia 1.5</h3>
<ul>
<li>Čítanie informarčného panela funguje s NVDA 2019.3.</li>
<li>Čítanie tabuľky výsledkov v adresári funguje s NVDA 2019.3.</li>
</ul>
<h3>Verzia 1.4</h3>
<ul>
<li>Opravená funkcia prechodu na hlavičky.</li>
<li>Funkcia na prechodk prílohám funguje aj vtedy, ak je v správe viacero
príloh.</li>
<li>Pridané preklady.</li>
</ul>
<h3>Verzia 1.3</h3>
<ul>
<li>Opravené čítanie hlavičiek správ pre nové verzie Office 365.</li>
<li>Upravené pre nové verzie NVDA (kompatibilné s Python 2 a 3).</li>
<li>Pridané preklady.</li>
<li>Vydania sú teraz odosielané cez appveyor.</li>
</ul>
<h3>Verzia 1.2</h3>
<ul>
<li>Opravené čítanie hlavičiek pri preposielaní stretnutia.</li>
<li>Pridané preklady.</li>
</ul>
<h3>Verzia 1.1</h3>
<ul>
<li>Pridané preklady.</li>
</ul>
<h3>Verzia 1.0</h3>
<ul>
<li>Prvé vydanie.</li>
</ul>
Trénerhttp://addons.nvda-project.org/addons/trainingKeyboardCommands.sk.html2023-05-10T20:38:33Z2019-01-17T04:16:45Z
<ul>
<li>Autor: Ibrahim Hamadeh</li>
<li>Download <a>stable version</a></li>
<li>Stiahnuť <a>vývojovú verziu</a></li>
</ul>
<p>Môžete si otestovať vaše zručnosti a zistiť, ako dobre poznáte skratky NVDA
pre desktop a laptop rozloženie.</p>
<p>Doplnok používa na zistenie skratiek zoznam skratiek v súbore
keyCommands.html, pričom používa aktuálny jazyk NVDA.</p>
<p>Doplnok nemá žiadne vlastné klávesové skratky.</p>
<p>Skratku musíte nastaviť v menu nvda > nastavenia > klávesové skratky v časti Tréner alebo Training keyboard.</p>
<h2>Použitie</h2>
<ul>
<li>Najprv si vyberiete rozloženie klávesnice.</li>
<li>Potom sa zobrazí otázka a vašou úlohou je vybrať správnu odpoveď.</li>
<li>Za každú správnu odpoveď získate jeden bod.</li>
<li>Ak zvolíte nesprávnu odpoveď, nezískavate ani nestratíte žiadne body.</li>
<li>Ak sa rozhodnete hru ukončiť, môžete uložiť aktuálny stav.</li>
<li>Ak znovu spustíte trénovanie v tom istom rozložení klávesnice, môžete
začať odznovu, alebo pokračovať tam, kde ste prestali.</li>
<li>Answering all questions, about 110 for each layout, you will be declared a
winner deserving NVDA addon's cup.</li>
</ul>
<p>https://www.nvaccess.org/addonStore/legacy?file=trainingKeyboardCommands</p>
<p>https://www.nvaccess.org/addonStore/legacy?file=trainingKeyboardCommands</p>
Pomocník na prácu so zoznamamihttp://addons.nvda-project.org/addons/columnsReview.sk.html2024-02-13T14:38:26Z2018-11-27T20:34:27Z
<ul>
<li>Author: Alberto Buffolino, Łukasz Golonka, other contributors</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=columnsReview">stable version</a></li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=columnsReview-dev">development version</a></li>
<li>NVDA compatibility: 2017.3 and beyond</li>
</ul>
<p>Columns Review is an add-on to enhance NVDA experience with lists.</p>
<p>Its features include:</p>
<ul>
<li>customizable actions on column header and/or content (available actions
are read, copy, spell and show in browse mode);</li>
<li>ability to cycle between columns in ten-by-ten intervals;</li>
<li>simplified header management (mouse clicks);</li>
<li>on-demand reading of relative current item position (i.e.: item 7 of 10);</li>
<li>customizable gestures with or without numpad;</li>
<li>"0 items" announcement when list is empty (not working in Win8/10 folders,
unfortunately);</li>
<li>say all support;</li>
<li>report of selected items (amount and item names);</li>
<li>list search (with item multiselection, if checked/supported).</li>
</ul>
<h2>Gestures</h2>
<p>Default keys for columns, headers and position are NVDA+control, but you can
customize them from add-on settings (not "Input gestures" dialog!).</p>
<p>Note that your keyboard could have problems processing some key
combinations, so try all add-on gestures and adjust them for better results.</p>
<p>See also add-on preferences for numpad mode, keyboard layout (without
numpad), and the four available actions for columns.</p>
<ul>
<li>NVDA+control+digits from 1 to 0 (keyboard mode) or from 1 to 9 (numpad
mode): by default, read the chosen column if pressed once, copy it if
pressed twice;</li>
<li>NVDA+control+numpadMinus (numpad mode): like NVDA+control+0 in keyboard
mode, read or copy the 10th, 20th, etc column;</li>
<li>NVDA+control+- (keyboard mode, EN-US layout): in a list with 10+ columns,
change interval and process columns from 11 to 20, from 21 to 30, and so
on (change last char according to your layout, from settings);</li>
<li>NVDA+control+numpadPlus (numpad mode): like previous command;</li>
<li>NVDA+control+enter (numpadEnter in numpad mode): open header manager;</li>
<li>NVDA+control+delete (numpadDelete in numpad mode): read relative current
item position (i.e.: item 7 of 10);</li>
<li>Arrows and NVDA+tab (in empty list): repeat "0 items" message;</li>
<li>NVDA+downArrow (desktop layout) or NVDA+a (laptop layout): start say all
(this gesture depends on original one under "Input gestures"/"System
caret");</li>
<li>NVDA+shift+upArrow (desktop layout) or NVDA+shift+s (laptop layout):
report amount and names of current selected list items (like previous
command for customization);</li>
<li>NVDA+control+f: open find dialog (not customizable);</li>
<li>NVDA+f3: find next occurrence of previously entered text (not
customizable);</li>
<li>NVDA+shift+f3: find previous occurrence (not customizable).</li>
</ul>
<h2>Support</h2>
<p>This add-on provide a general support for more common lists (see below), and
some specific applications. Main author (Alberto Buffolino) cannot guarantee
compatibility/functionality for those applications he not uses, like Outlook
and Windows Mail, but he'll be happy to collaborate with their users or
accept a pull request for them.</p>
<p>Lists supported are:</p>
<ul>
<li>SysListView32;</li>
<li>DirectUIHWND (pre 64-bitové systémy);</li>
<li>WindowsForms10.SysListView32.* (Aplikácie používajúce .NET);</li>
<li>multi-column treeview like as that presents in RSSOwlnix;</li>
<li>Tabuľky mozilla (správy v Thunderbide aj s podporou vláken).</li>
</ul>
Skoč na texthttp://addons.nvda-project.org/addons/textnav.sk.html2023-05-10T20:38:33Z2018-11-10T06:10:40Z
<ul>
<li>Autor: Tony Malykh</li>
<li>Stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=textnav">stabilnú verziu</a></li>
</ul>
<p>Umožňuje rýchlo skočiť na text v režime prehliadania, pomocou jedinej
klávesovej skratky. Skočí na text, ktorý obsahuje aspoň jednu alebo viacero
viet. Takto môžete rýchlo nájsť text, preskakovať menu, reklamu a iné
nepodstatné časti.</p>
<h2>Klávesové skratky:</h2>
<ul>
<li>Alt+shift+šípka dole: Skoč na nasledujúci text.</li>
<li>Alt+shift+šípka hore: Skoč na predchádzajjúci text.</li>
</ul>
Audiografhttp://addons.nvda-project.org/addons/AudioChart.sk.html2024-02-13T14:37:42Z2018-11-10T06:10:39Z
<ul>
<li>Autor: Tony Malykh</li>
<li>Stiahnúť <a href="https://www.nvaccess.org/addonStore/legacy?file=audiochart">stabilnú verziu</a></li>
</ul>
<p>Tento doplnok interpretuje časové rady v programe Microsoft Excel pomocou
zvuku.</p>
<h2>Použitie</h2>
<p>Vyberte bunku alebo riadok obsahujúci časový rad.</p>
<h2>Klávesové skratky</h2>
<ul>
<li>NVDA+A: prehrať graf.</li>
<li>Stlačené dvakrát rýchlo za sebou zobrazí dialógové okno kalibrácie. V
rozložený laptop stlačte kláves NVDA+SHIFT+CTRL+A.</li>
</ul>
<h2>Zdrojový kód</h2>
<p> https://github.com/mltony/nvda-audio-chart/</p>
BluetoothAudiohttp://addons.nvda-project.org/addons/BluetoothAudio.sk.html2023-05-10T21:28:25Z2018-11-10T06:10:39Z
<ul>
<li>Autor: Tony Malykh</li>
<li>Stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=bluetoothaudio">stabilnú verziu</a></li>
</ul>
<p>Doplnok zlepšuje kvalitu zvuku, ak používate Bluetooth slúchadlá alebo
reproduktory.</p>
<p>Väčšina Bluetooth zariadení sa po krátkom čase neaktivity prepne do režimu
spánku. Keď NVDA začne rozprávať, trvá dlhší čas, kým sa zariadenie prebudí
a preto nepočujete prvé hlásky hlasového výstupu. Tento doplnok zabraňuje
tomu, aby sa Bluetooth zariadenie preplo do režimu spánku a to tak, že
neustále vysiela do zariadenia tichý zvuk. (Poznámka SK prekladateľa:
Doplnok je vhodný aj vtedy, ak sa štandardná zvuková karta často prepína do
režimu spánku a NVDA preto pomaly hláskuje a reaguje pomaly).</p>
<p>Upozorňujeme, že používanie tohto doplnku môže skrátiť výdrž batérie v
Bluetootch reproduktoroch alebo slúchadlách.</p>
Calibrehttp://addons.nvda-project.org/addons/calibre.sk.html2023-05-10T20:38:33Z2018-11-01T12:46:05Z
<ul>
<li>Autor: Javi Dominguez</li>
<li>Stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=cae">stable version</a></li>
<li>Stiahnuťd <a href="https://www.nvaccess.org/addonStore/legacy?file=cae-dev">vývojovú verziu</a></li>
</ul>
<p>Doplnok zlepšuje prístupnosť čítačky kníh Calibre.</p>
<ul>
<li>F10: Presunie fokus na panel nástrojov. Na pohyb po položkách použite kláves tab alebo šípky. Položku aktivujete klávesom enter. Kontextové menu zobrazíte klávesom aplikácie. Panel nástrojov opustíte klávesom escape.</li>
<li>F12: Vyhľadá knihu cez vyhľadávač Google.</li>
<li>NVDA+alt+end prečíta celkový počet kníh a počet vybratých kníh v knižnici.</li>
<li>nvda+ctrl+h otvorí nastavenia pre aktuálny stĺpec.</li>
<li>I (v knižnici) prečíta informácie o knihe.</li>
</ul>
<p>Klávesové skratky môžete upraviť v dialógu klávesové skratky. Dialóg s nastavením otvorte z aktívneho okna aplikácie Calibre. V možnostiach môžete tiež nastaviť spôsob, akým NVDA interpretuje tabuľku v knižnici (riadky a stĺpce, alebo len stĺpce, alebo vôbec).</p>
<p>Klávesové skratky sú popísané tiež v <a href="https://manual.calibre-ebook.com/gui.html">Dokumentácii k programu Calibre (anglicky)</a>.</p>
<p>Doplnok je poskytovaný pod všeobecnou GNU licenciou. <a href="https://github.com/javidominguez/Calibre/blob/master/COPYING.txt">Podrobnosti nájdete tu (anglicky)</a>.</p>
Prehliadač panelov nástrojovhttp://addons.nvda-project.org/addons/toolbarsExplorer.sk.html2023-08-14T13:52:28Z2018-08-23T19:59:29Z
<ul>
<li>Autor: Alberto Buffolino</li>
<li>Stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=toolbarsExplorer">stabilnú verziu</a></li>
<li>Stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=toolbarsExplorer-dev">vývojovú verziu</a></li>
</ul>
<p>Umožňuje orientáciu na paneloch nástrojov rôznych aplikácií. Skratky sú
odvodené a zjednodušené z objektovej navigácie.</p>
<h2>Príkazy</h2>
<ul>
<li>Alt+aplikácie (kontextová ponuka: Spustí režim prezerania panela nástrojov<br />
(Skratku môžetezmeniť v dialógu klávesové skratky, vetva objektová navigácia).</li>
</ul>
<p>Pri zapnutom prezeraní panelov nástrojov fungujú tieto skratky:</p>
<ul>
<li>Ľavá a pravá šípka: prechádza na predchádzajúci a nasledujúci panel
nástrojov;</li>
<li>Šípkyhore a dole: Posúva hore alebo dole položky na panely nástrojov;</li>
<li>Enter: Aktivuje panel nástrojov alebo položku;</li>
<li>Medzera: Simuluje kliknutie ľavým tlačidlom myši na panely alebo položke;</li>
<li>Aplikácie (kontextová ponuka) alebo shift+F10: Simuluje kliknutie pravým
tlačidlom myši na panely alebo položke;</li>
<li>Escape: Ukončí prezeranie panelov nástrojov.</li>
</ul>
<p>S panelmi nástrojov môžete pracovať aj pomocou štandardných príkazov NVDA,
rovnako ako keby ste použili objektovú navigáciu.</p>
<h2>Poznámky</h2>
<p>Režim prezerania sa ukončí klávesom escape a tiež:</p>
<ul>
<li>Vykonaním akcie (pomocou medzeri, klávesu aplikácie alebo shift+f10 a
enterom);</li>
<li>Stlačením skratky, ktorá opustí aktuálny panel nástrojov (alt, windows,
tab, NVDA+F1, gestá objektovej navigácie a pod).</li>
</ul>
<p>Iné skratky, v ktorých nie sú klávesy alt, Windows a Escape (napríklad h, 1,
shift+h, ctrl+z) nemajú žiadny význam.</p>
<h2>Odporúčania</h2>
<ul>
<li>Doplnok nemusí pracovať správne pri prvom spustení a po aktualizácii v
Mozilla aplikáciách. Reštartujte aplikáciu a NVDA;</li>
<li>V Libre offic eodporúčame v menu zobraziť nastaviť štandardný alebo
štandardný (režim jednej lišty).</li>
</ul>
Blokovanie vstupuhttp://addons.nvda-project.org/addons/inputLock.sk.html2023-05-10T20:38:33Z2018-08-16T16:47:17Z
<ul>
<li>Autor: Jose Manuel Delicado</li>
<li>NVDA compatibility: 2022.4 and beyond</li>
<li>Stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=inputLock">stabilnú verziu</a></li>
</ul>
<h2>Úvod</h2>
<p>Máte doma deti alebo domácich miláčikov? Často si náhodne presuniete myš a
potom píšete na nesprávne miesto? Doplnok blokovanie vstupu je práve pre
vás. Môžete bez obáv nechať váš počítač bez dozoru.</p>
<p>Doplnok umožňuje zablokovať klávesnicu, dotykovú obrazovku, myš aj
braillovský riadok.</p>
<h2>Použitie</h2>
<p>Doplnok poskytuje dve nové klávesové skratky. Tieto predvolene nie sú
nastavené a je potrebné ich nastaviť v dialógu klávesové skratky. Návod na
používanie tejto funkcie nájdete v návode NVDA.</p>
<p>Ak stlačíte skratku na blokovanie vstupu, NVDA povie "vstup zamknutý" a
automaticky zablokuje vstup zo všetkých zariadení. Odblokovať ho môžete tou
istou klávesovou skratkou.</p>
<p>Druhá klávesová skratka umožňuje zamknúť len myš. Po zamknutí myši môžete s
kurzorom myši pracovať cez príkazy NVDA, nebudete ale môcť použiť fyzickú
myš. V nastaveniach doplnku môžete tiež aktivovať zamknutie klikania myši a
aktivovať °°automatické zamknutie myši po štarte NVDA.</p>
<p>Upozorňujeme, že ak povolíte zamknutie myši vrátane klikania, niektoré
funkcie NVDA nebudú fungovať.</p>
<h2>Limitations and known problems</h2>
<p>Input Lock has the following known problems:</p>
<ul>
<li>The shortcuts control+alt+del and windows+l can be used even when the
keyboard is locked.</li>
<li>On some laptops, the touchpad still accepts user input after mouse is
blocked.</li>
</ul>
<h2>Zmeny</h2>
<h3>Version 1.11</h3>
<ul>
<li>Upravené požiadavky kompatibility pre aktuálne verzie NVDA.</li>
<li>Aktualizované preklady.</li>
<li>Now, minimum supported version is 2022.4.</li>
</ul>
<h3>Version 1.10</h3>
<ul>
<li>Upravené požiadavky kompatibility pre aktuálne verzie NVDA.</li>
<li>Aktualizované preklady.</li>
<li>Updated documentation.</li>
<li>Now, minimum supported version is 2021.3.</li>
<li>The input will remain blocked after waking up from standby mode. Thanks to
Javi Dominguez.</li>
</ul>
<h3>Version 1.9</h3>
<ul>
<li>Upravené požiadavky kompatibility pre aktuálne verzie NVDA.</li>
<li>Aktualizované preklady.</li>
<li>Updated documentation.</li>
</ul>
<h3>Verzia 1.8</h3>
<ul>
<li>Upravené požiadavky kompatibility pre aktuálne verzie NVDA.</li>
<li>Aktualizované preklady.</li>
</ul>
<h3>Verzia 1.7</h3>
<ul>
<li>Upravené požiadavky kompatibility pre aktuálne verzie NVDA.</li>
<li>Aktualizované preklady.</li>
</ul>
<h3>Verzia 1.6</h3>
<ul>
<li>Nastavenia sa odteraz odstránia len po odinštalovaní doplnku. Pri
aktualizácii doplnku ostanú zachované.</li>
<li>Nové a aktualizované preklady.</li>
</ul>
<h3>Verzia 1.5</h3>
<ul>
<li>Upravené pre aktuálne verzie NVDA.</li>
<li>Nové preklady.</li>
</ul>
<h3>Verzia 1.4</h3>
<ul>
<li>Klávesové skratky nie sú pridelené.</li>
</ul>
<h3>Verzia 1.3</h3>
<ul>
<li>Pridaný dialóg s nastaveniami v starších verziách NVDA a príslušná vetva
do stromu s nastaveniami pre novšie verzie NVDA.</li>
<li>Pridaná možnosť zablokovať myš automaticky po štarte NVDA.</li>
<li>Pridaná možnosť zablokovať aj klikanie myšou.</li>
<li>Drobné úpravy v kóde vrátane odstránených nadbytočných fráz na prekladanie</li>
</ul>
<h3>Verzia 1.2</h3>
<ul>
<li>Pridaná možnosť zamknúť myš</li>
<li>Pridaná skratka na zamknutie a odomknutie myši</li>
</ul>
<h3>Verzia 1.1</h3>
<ul>
<li>Ak iný doplnok sleduje stav zariadenia, sledovanie sa obnoví po
odblokovaní vstupu.</li>
</ul>
<h3>Verzia 1.0</h3>
<ul>
<li>Prvé vydanie</li>
</ul>
Aktualizácie doplnkovhttp://addons.nvda-project.org/addons/addonUpdater.sk.html2023-10-01T03:03:51Z2018-07-29T18:33:01Z
<ul>
<li>Author: Joseph Lee, Luke Davis</li>
<li>Stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=addonUpdater">stabilnú verziu</a></li>
<li>NVDA compatibility: 2023.1</li>
<li>This is a would-be legacy add-on: NVDA 2023.2 includes add-on update check
functionality through add-on store</li>
</ul>
<p>Umožňuje skontrolovať, sťahovať a aktualizovať doplnky. Doplnok súčasne
rieši ticket 3208.</p>
<p>To check for updates after installing this add-on, go to NVDA
menu/Tools/Check for add-on updates (if NVDA did notice updates, the menu
item will say "Review add-on updates" followed by update count). If updates
are available, a list of add-on updates will be shown, with each entry
consisting of add-on name, current version, new version, and update
channel. Select Update, and NVDA will download and apply updates in
sequence, with a prompt to restart your NVDA shown afterwards.</p>
<p>Nasledujúce doplnky poskytujú vstavanú aktualizačnú funkciu, takže sa
aktualizácie nebudú kontrolovať prostredníctvom tohto doplnku:</p>
<ul>
<li>Rozšírenie pre Braille</li>
<li>Tienda NVDA (Spanish NVDA Community Store)</li>
</ul>
<p>Dôležité:</p>
<ul>
<li>This is a proof of concept add-on. Once the <a href="https://github.com/nvaccess/nvda/issues/3208">relevant feature is included
in NVDA</a> in the form of <a href="https://github.com/nvaccess/nvda/pull/13985">an add-on store</a> (introduced in NVDA
2023.2), this add-on will be discontinued.</li>
<li>This add-on requires Windows 10 Version 22H2 or later.</li>
<li>This add-on is not intended to be used in secure screens. If you have
add-ons installed in the secure screen, even if you copy Add-on Updater to
secure screen mode, Add-on Updater will not work.</li>
<li>Ak nové aktualizácie doplnku určujú rozsah kompatibility (minimálna a
posledná testovaná verzia NVDA) a ak spustená verzia NVDA nespadá do
rozsahu kompatibility, doplnok sa neaktualizuje.</li>
<li>Not all add-ons come with development releases. If you are not getting
updates after choosing to install development versions of an add-on,
switch to stable channel for affected add-ons.</li>
<li>On some systems (particularly computers joined to a corporate domain),
add-on update check functionality may not work properly, therefore add-on
updates must be downloaded manually.</li>
<li>Some features require NVDA to be installed on the computer.</li>
<li>Some add-on releases include SHA256 hash values for checking add-on
package integrity (all add-ons published on add-on store include SHA256
values), and if the hash value does not match, add-on updating will fail.</li>
</ul>
<h2>Add-on settings</h2>
<p>You can configure Add-on Updater settings from NVDA Settings screen (NVDA
menu, Preferences, Settings) under Add-on Updater category. Add-on settings
are as follows:</p>
<ul>
<li>Automatically check for add-on updates: if checked, NVDA will check for
add-on updates once a day. Automatic update checks is enabled on Windows
client systems and disabled on server systems.</li>
<li>Add-on update notification: you can choose to receive update notification
as a dialog or a toast. On server systems or running a portable copy of
NVDA, update notification will be shown as a dialog.</li>
<li>Update add-ons in the background (update notification is set to toast): if
checked, Add-on Updater will apply updates in the background. A toast will
appear informing you that add-on updates are being downloaded and
installed, followed by another message announcing update results. Same
limitations as add-on update notification setting and toast must be
selected from the above option in order for background updates to work.</li>
<li>Do not update add-ons: you can choose add-ons that should not be updated.</li>
<li>Prefer development releases: any add-ons checked in this list will receive
development (prerelease) releases.</li>
<li>Development release channel (selected add-on must be checked from prefer
development releases): allows selecting development updates coming from
either dev or beta channel.</li>
<li>Add-on update source: you can choose where to get updates from. Currently
Add-on Updater supports downloading updates from the sources listed
below. A confirmation message will be shown after changing update source.</li>
</ul>
<p>The available add-on update sources are:</p>
<ul>
<li>NV Access add-on store (default)</li>
<li>Community add-ons website</li>
<li>Spanish community add-ons catalog</li>
<li>Catalogs maintained by NVDA communities in China and Taiwan</li>
</ul>
<h2>Version 23.10</h2>
<ul>
<li>Changed update notification message to mention NV Access add-on store if
running NVDA 2023.2 or later and add-on update source is set to add-on
store.</li>
</ul>
<h2>Version 23.09</h2>
<ul>
<li>Windows 10 Version 22H2 or later is required.</li>
</ul>
<h2>Version 23.08</h2>
<p>This is the final version to support Windows 7, 8, 8.1, and 10 21H2 and
earlier.</p>
<ul>
<li>Add-on update results dialog or toast message will be shown once add-on
store message is closed.</li>
<li>If add-on updates dialog is shown and then closed without installing
add-ons, NVDA will no longer report no add-on updates when add-on updates
are checked.</li>
<li>Add-on Updater will no longer present startup messages and perform update
checks if updating a portable copy of NVDA.</li>
</ul>
<h2>Version 23.07</h2>
<ul>
<li>If using an NVDA release with add-on store included, a startup message
will be shown informing users about the new add-on store. If this happens,
add-on update results dialog will not be shown. Add-on Updater will
continue to work.</li>
<li>Improved performance when checking for add-on updates from NV Access
add-on store and community add-ons website update sources, particularly
when no add-on updates are available.</li>
</ul>
<h2>Version 23.06</h2>
<ul>
<li>NVDA 2023.1 or later is required.</li>
<li>Changed default add-on update source from community add-ons website to NV
Access add-on store.</li>
</ul>
<h2>Version 23.05</h2>
<ul>
<li>Add-on update channel will be displayed when reviewing available add-on
updates.</li>
<li>NVDA will present a message about add-on store if using NVDA releases with
add-on store included.</li>
</ul>
<h2>Version 23.04</h2>
<ul>
<li>Added development update channel setting to let users of development
add-ons choose between dev and beta update channels. This option is shown
if the selected add-on from prefer development releases list is checked.</li>
<li>NV Access add-on store is broadly available as an update source from
Add-on Updater.</li>
</ul>
<h2>Version 23.03</h2>
<ul>
<li>Due to changes made to the website used by some update sources, this must
be installed manually.</li>
<li>Added NV Access add-on store as an experimental add-on update source.</li>
</ul>
<h2>Version 23.02</h2>
<ul>
<li>NVDA 2022.4 or later is required.</li>
<li>NVDA will no longer offer what appears to be older add-on updates for most
add-ons after checking for add-on updates. This applies to add-ons with
version text of the form number.number.</li>
</ul>
<h2>Version 23.01</h2>
<ul>
<li>NVDA will check minimum Windows version for add-on updates if update
source is set to NVDA community add-ons website.</li>
<li>Improved performance when downloading many ad-on updates at once. As a
result, the order of add-on downloads shown in download progress dialog
will be random.</li>
<li>Parts of the add-on now use Python's concurrent.futures module to improve
performance, specifically update check and download processes.</li>
</ul>
<h2>Version 22.11</h2>
<ul>
<li>NVDA 2022.3 or later is required.</li>
</ul>
<h2>Version 22.10</h2>
<ul>
<li>Added catalogs from NVDA communities in China and Taiwan as add-on update
sources (by Woody Tseng).</li>
</ul>
<h2>Version 22.09</h2>
<ul>
<li>NVDA 2022.2 or later is required.</li>
<li>NVDA will check SHA256 hash values while downloading add-on updates if the
add-on update source includes hash values for add-on packages. If hash
value is invalid, add-on updating will fail.</li>
</ul>
<h2>Version 22.08</h2>
<ul>
<li>Significant internal code reorganization and rewrites.</li>
<li>On Windows Server systems, automatic add-on update check feature is
disabled by default (affects new installations).</li>
<li>Added ability to select different add-on update sources. Add-on Updater
can check for updates hosted on community add-ons website
(addons.nvda-project.org) or Spanish community add-ons catalog
(nvda.es). A new combo box was added in add-on settings panel to select
add-on update source.</li>
<li>On Windows 10 and later, it is possible to let Add-on Updater check for,
download, and install add-on updates in the background provided that NVDA
is actually installed and ad-on update notification is set to toast.</li>
<li>Redesigned add-on update download and install experience for multiple
add-on updates, including use of a single dialog to show download progress
for all add-ons and updating add-ons after downloading all of them.</li>
<li>If NVDA is set to announce update notifications as toasts, "check for
add-on updates" menu item will become "review add-on updates" when updates
become available, with the new name including add-on update count.</li>
<li>In NVDA 2022.1 and later, Add-on Updater can process command-line switches
for this add-on (currently none).</li>
<li>In add-on updates dialog, add-ons disabled by the user are unchecked by
default, and a confirmation message will be shown checking disabled
add-ons and attempting to update them as doing so will enable them.</li>
</ul>
<h2>Version 22.07</h2>
<ul>
<li>URL's used by the add-on are now constants hosted inside a new module
(contributed by Luke Davis).</li>
<li>Add-on download progress dialog is now centered on screen.</li>
</ul>
<h2>Version 22.03</h2>
<ul>
<li>Improved security by not loading the add-on when NVDA is running in secure
mode.</li>
</ul>
<h2>Version 22.02</h2>
<ul>
<li>NVDA 2021.3 or later is required.</li>
<li>On Windows 10, add-on update toast notifications are localized.</li>
</ul>
<h2>Version 22.01</h2>
<ul>
<li>NVDA 2021.2 or later is required.</li>
<li>On server systems running Windows Server 2016 and later, add-on updates
will be presented in a dialog instead of using toast notifications.</li>
</ul>
<h2>Version 21.10</h2>
<ul>
<li>It is again possible to check for add-on updates on some systems, notably
after a clean Windows installation.</li>
</ul>
<h2>Version 21.09</h2>
<ul>
<li>NVDA 2021.1 or later is required.</li>
<li>on Windows 10 and later, it is possible to select add-on update
notification between a toast message and an update dialog. This can be
configured from Add-on Updater settings found in NVDA Settings screen.</li>
<li>Add-on Updater will no longer check minimum Windows release information
for add-ons as add-ons such as Windows App Essentials provide better
Windows compatibility information.</li>
</ul>
<h2>Version 21.07</h2>
<ul>
<li>On Windows 10 and later, a toast notification will be shown when add-on
updates are available. Note that you cannot click this notification - you
must open NVDA menu/Tools/Check for add-on updates to review updates.</li>
<li>When legacy add-ons dialog is shown at startup, you can now review legacy
add-ons and reasons just like add-on updates.</li>
<li>Improved add-on update check internals, including use of add-on metadata
collection provided by the community to validate add-on
compatibility. Among other things, this eliminates add-on releases for
adding update checks for new add-ons.</li>
</ul>
<h2>Version 21.05</h2>
<ul>
<li>NVDA will no longer play error tones if trying to check updates while
using NVDA 2021.1 alpha snapshots, caused by changes to wxPython GUI
toolkit.</li>
</ul>
<h2>Version 21.03</h2>
<ul>
<li>NVDA 2020.4 or later is required.</li>
<li>NVDA will present an error dialog if errors occur while checking for
add-on updates such as loss of Internet connection.</li>
</ul>
<h2>Version 20.11</h2>
<ul>
<li>NVDA 2020.3 or later is required.</li>
<li>Resolved more coding style issues and potential bugs with Flake8.</li>
<li>NVDA will no longer play error tones or appear to do nothing when using
the add-on while NVDA is running from source code. A message about this
fact will be recorded in the log instead.</li>
</ul>
<h2>verzia 20.07</h2>
<ul>
<li>Vyžaduje NVDA od verzie 2020.1.</li>
<li>Ak používate nepodporované doplnky, tento nástroj na to upozorní a
odporučí ich zakázanie alebo odinštalovanie.</li>
<li>Skratka ctrl+nvda+c uloží nastavenia doplnku. Ctrl+nvda+r načíta uložené
nastavenia. Ctrl+nvda+r stlačené trikrát rýchlo za sebou obnoví pôvodné
nastavenia doplnku. (Poznámka prekladateľa: toto sú predvolené skratky
nvda a nie výhradné skratky doplnku. Myslite na to pri prípadnom resete
nastavení doplnku, keďže skratka obnoví aj pôvodné nastavenia NVDA).</li>
</ul>
<h2>verzia 20.06</h2>
<ul>
<li>Opravené drobné chyby v kóde.</li>
</ul>
<h2>verzia 20.04</h2>
<ul>
<li>NVDA viac nehlási chybu pri pokkuse aktualizovať doplnky.</li>
<li>Opravená chyba, ktorá spôsobovala, že v menu nástroje nebola zobrazená
položka aktualizovať doplnky.</li>
</ul>
<h2>verzia 20.03</h2>
<ul>
<li>Vyžaduje NVDA od verzie 2019.3.</li>
<li>Aktualizačný nástroj viac nekontroluje kompatibilitu doplnkov, nakoľko
toto už kontroluje priamo NVDA.</li>
</ul>
<h2>Verzia 19.11</h2>
<ul>
<li>Ak sú dostupné aktualizácie, NVDA oznámi ich počet.</li>
</ul>
<h2>verzia 19.09</h2>
<ul>
<li>Vyžaduje NVDA od verzie 2019.2.</li>
<li>Opravené chyby pri sťahovaní doplnkov zo servera Github.</li>
</ul>
<h2>verzia 19.04</h2>
<ul>
<li>Vyžaduje sa NVDA 2019.1 alebo novší.</li>
<li>Pri inštalácií aktualizácií doplnkov sa kontroluje vyžadovaná a naposledy
testovaná verzia NVDA.</li>
</ul>
<h2>Verzia 19.01</h2>
<ul>
<li>Vyžaduje sa NVDA 2018.4 alebo novší.</li>
<li>Vylepšená odozva pri kontrole aktualizácií doplnkov.</li>
<li>Doplnok je teraz kompatibilný s Pythonom 3.</li>
</ul>
<h2>Verzia 18.12.2</h2>
<ul>
<li>Pripravené pre Python 3.</li>
<li>Opravená kompatibilita s alpha verziami NVDA, v ktorých nefungovalo
sťahovanie aktualizácií.</li>
</ul>
<h2>Verzia 18.12.1</h2>
<ul>
<li>Pridané preklady.</li>
</ul>
<h2>Verzia 18.12</h2>
<ul>
<li>Pridaná možnosť aktualizovať aj zakázané doplnky. Po aktualizácii ostanú
zakázané doplnky aj naďalej vypnuté.</li>
<li>Pri aktualizácii sa skontroluje vyžadovaná verzia NVDA a operačného
systému. Ak nie sú splnené systémové požiadavky, NVDA na to upozorní a
doplnok sa nebude aktualizovať.</li>
<li>Ak je povolená kontrola automatickej aktualizácie a sú pripravené na
aktualizácie, NVDA zobrazí aktualizácie namiesto toho, aby sa vás NVDA
opýtal, či chcete skontrolovať aktualizácie.</li>
</ul>
<h2>Verzia 18.10</h2>
<ul>
<li>Prvé stabilné vydanie, označené ako návrh.</li>
</ul>
Access8Mathhttp://addons.nvda-project.org/addons/access8math.sk.html2024-02-13T14:36:51Z2018-06-24T21:04:39Z
<ul>
<li>Author: Woody Tseng</li>
<li>Stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=access8math">Stabilnú verziu</a></li>
</ul>
<h1>Access8Math feature</h1>
<p>This NVDA addon enhances the mathematical content reading and writing
experience.</p>
<p>The reading feature includes improved language translation in the ability to
segment long math content into smaller parts using interactive navigation.</p>
<p>The writing feature includes a command menu for easier
LaTeX/AsciiMath/Nemeth input and the ability to export to a visually
readable HTML document for better collaboration.</p>
<h2>reading feature</h2>
<ul>
<li>Reads entire lines including text and mathematical content</li>
<li>Provides interactive navigation to move, read, and zoom in or out on
mathematical content snippets</li>
<li>Allows for reviewing text while interactive navigation</li>
<li>Uses simplified speech rules</li>
<li>Breaks speech between items in mathematical content</li>
</ul>
<h2>writing feature</h2>
<ul>
<li>Allows writing of mathematical content using LaTeX/AsciiMath/Nemeth</li>
<li>Provides a command menu for inputting LaTeX</li>
<li>Offers shortcut gestures for inputting LaTeX</li>
<li>Allows for more efficient cursor movement during editing</li>
<li>Allows reads documents containing LaTeX/AsciiMath/Nemeth data in real-time
while editing the document</li>
<li>Provides converting text files into HTML files for preview and export.</li>
</ul>
<h1>Access8Math feature</h1>
<p>This NVDA add-on enhances speech and braille output for mathematical
content. Although the NVDA already integrating MathPlayer, certain aspects
require improvement, such as the lack or incompleteness of language-specific
translation, language-specific interactive navigation.</p>
<p>Interactive navigation dissects mathematical content into smaller portions
for speech or braille output, allowing for the selection of the desired
fragment and mode of delivery through keyboard commands. This enhances one's
understanding of the structure and elements of lengthy mathematical content,
and the hierarchical relationships between items.</p>
<p>Additionally, this NVDA add-on enables the writing of mathematical
content. Using the command menu, input can be executed without having to
memorize LaTeX codes. Upon completion, the document can be transformed into
a visually comprehensible HTML document via the view and export function,
thereby enabling seamless collaboration and discourse with others.</p>
<h2>Reading feature</h2>
<p>Access8Math is able to read MathML content in web browsers such as Mozilla
Firefox, Google Chrome, and Microsoft Edge, as well as MathType content in
Microsoft Word.</p>
<p>By pressing the space bar or enter key on a MathML math object, you can
enter navigation mode and interact with the content by moving, and zooming
in or out on reading snippets.</p>
<ul>
<li>Analyze the overall mathematical meaning of the content: analyze the
structure of MathML, and when it meets a specific rule, read it aloud in
the mathematical meaning of the rule</li>
<li>Analyze the mathematical meaning of the content item: When navigating and
browsing, it will prompt the meaning of the content under its upper
content. For example, there are two score items, and moving between them
will enroll the item as the denominator or numerator</li>
</ul>
<h3>navigation interactive mode command:</h3>
<p>The following commands are available in navigation interactive mode:</p>
<ul>
<li>"Down Arrow": shrink the reading snippet(zoom in)</li>
<li>"Up Arrow": enlarge the reading snippet(zoom out)</li>
<li>"Left Arrow": Moves to the previous math content.</li>
<li>"Right Arrow": Moves to the next math content.</li>
<li>"home": Moves back to the top of the entire math content.</li>
<li>"ctrl+C": Copies the MathML source code of the object.</li>
<li>"numpad 1~9": Reads the math content as serialized text using NVDA
Reviewing Text.</li>
<li>"ESC": Exits the navigation mode.</li>
</ul>
<h2>Writing feature</h2>
<p>Comprehensive content: Incorporating Both Text and Mathematical Content</p>
<p>For Windows 11, the Access8Math editor must be used, while for Windows 10 or
earlier versions, either Access8Math editor or Notepad can be used. It is
recommended to use the built-in Access8Math editor for writing comprehensive
content.</p>
<p>To distinguish between text content and mathematical content, you can use
delimiters to enclose the mathematical notation area. This means that any
data within the mathematical notation area will be considered mathematical
content according to the specified delimiter, while data outside of the
mathematical notation area will be treated as text content.</p>
<p>| category | start delimiter | end delimiter | | --- | --- | --- | |
LaTeX(bracket) | ( | ) | | LaTeX(money) | $ | $ | | AsciiMath | <code>|</code> | |
Nemeth(UEB) | <em>% | </em>: | | Nemeth(at) | @ | @ |</p>
<p>You can choose what delimiter use for LaTeX/Nemeth in the writing setting.</p>
<h3>Command gesture (toggle: NVDA+alt+c)</h3>
<p>alt+m: The mark command window pops up, select LaTeX/AsciiMath/Nemeth and
press enter to add LaTeX/AsciiMath marks before and after the currently
selected text (the current cursor when no text is selected) and
automatically move the cursor into it. Enter content quickly.</p>
<p>alt+l: Pop up the LaTeX command window, select the LaTeX command item to be
added and press the enter key to add the corresponding LaTeX syntax at the
current cursor and automatically move the cursor to the appropriate input
point for quick input.</p>
<p>LaTeX command window</p>
<ul>
<li>Move to any LaTeX command item and press English letters (a~z) or f1~f12
to set shortcuts</li>
<li>Move any LaTeX command item and press delete/back space to remove the
shortcut that has been set</li>
<li>Move to any LaTeX command item and press enter to add the corresponding
LaTeX syntax at the current cursor</li>
</ul>
<p>alt+i: When the cursor stops on the math block, you can interact with the
math block for navigation</p>
<p>alt+h: HTML documents that can convert text data and mathematical data can
be viewed or exported. The content of the math block is converted into
MathML and presented side by side with the text to facilitate visual
reading.</p>
<ul>
<li>View: Open the converted HTML document through the default .HTML extension
application set by the system.</li>
<li>Export: Pack the converted HTML file and the original text file into a
compressed file.</li>
</ul>
<p>alt+t: The data of the block where the cursor is located can be converted
between LaTeX and AsciiMath (the cursor needs to be in the LaTeX or
AsciiMath block)</p>
<p>In the writing settings, you can choose whether to enable command gestures
at startup. Press NVDA+alt+c in the editing area to enable or disable
command gestures, which can be changed in input gestures.</p>
<h3>Writing block navigation gestures (toggle: NVDA+alt+n)</h3>
<ul>
<li>alt+Left arrow key: move to the start point of the previous data block</li>
<li>alt+Down arrow key: Only read the content of the current data block
without moving</li>
<li>alt+right arrow: move to the start point of the next data block</li>
<li>alt+home: move to the starting point of the current data block</li>
<li>alt+end: move to the end point of the current data block</li>
<li>alt+shift+left arrow: move to the previous data block and select</li>
<li>alt+shift+down key: do not move, only select the content of the current
data block</li>
<li>alt+shift+right arrow: move to the next data block and select</li>
</ul>
<p>In the writing settings, you can choose whether to enable the block
navigation gestures when starting. Press NVDA+alt+n in the editing area to
enable or disable the block navigation gestures, which can be changed in the
input gestures.</p>
<h3>Shortcut gestures (toggle: NVDA+alt+s)</h3>
<p>When the cursor is in the LaTeX block, press the letter, f1~f12 to quickly
insert the bound LaTeX. Press shift+letter, shift+f1~f12 to read out the
LaTeX currently bound to the shortcut. (Need to set the shortcut key in the
command menu first)</p>
<p>In the writing settings, you can choose whether to enable the quick
navigation gestures at startup. Press NVDA+alt+s in the editing area to
enable or disable the quick navigation gestures, which can be changed in the
input gestures.</p>
<h3>Greek letter gestures (toggle: NVDA+alt+g)</h3>
<p>When the cursor is in the LaTeX block, press the letter to quickly insert
the corresponding Greek letter LaTeX.</p>
<p>Mapping table</p>
<p>| English letter | Greek letter | LaTeX | | --- | --- | --- | | a | α |
\alpha | | b | β | \beta | | c | θ | \theta | | d | δ | \delta | | e | ε |
\epsilon | | f | φ | \phi | | g | γ | \gamma | | h | η | \eta | | i | ι |
\iota | | k | κ | \kappa | | l | λ | \lambda | | m | μ | \mu | | n | ν | \nu
| | o | ο | \omicron | | p | π | \pi | | r | ρ | \rho | | s | σ | \sigma | |
t | τ | \tau | | u | υ | \upsilon | | v | φ | \psi | | w | ω | \omega | | x
| χ | \chi | | y | ξ | \xi | | z | ζ | \zeta |</p>
<h3>Browse navigation mode (toggle: NVDA+space)</h3>
<p>When the navigation mode is turned on, the mathematical data block read by
the cursor mobile report will read the mathematical text content instead of
the original grammatical data</p>
<p>You can use the following key gestures to move the editing cursor and
interactive navigation</p>
<ul>
<li>Left key: move to the starting point of the previous data block and read
it out</li>
<li>Right arrow: move to the start point of the next data block and read it
out</li>
<li>Up key: move to the previous line and read out the contents of all data
blocks in this line</li>
<li>Down key: move to the next line and read out the contents of all data
blocks in this line</li>
<li>pageUp: move up ten lines and read out the content of all data blocks in
that line</li>
<li>pageDown: move down ten lines and read out the content of all data blocks
in that line</li>
<li>home: move to the first block of the line where the cursor is located</li>
<li>end: move to the last block of the line where the cursor is located</li>
</ul>
<p>Use the cursor to move the key plus the shift key to select the text
together</p>
<p>space/enter: When the cursor stops on a math block, it can interact with the
math content of the data block to navigate</p>
<p>For the following keys, if you only press the single key, the editing cursor
will jump to the next data block position, if you press shift + the single
key at the same time, the editing cursor will jump to the previous data
block position:</p>
<ul>
<li>l: Move to the next LaTeX data block and read it out</li>
<li>a: Move to the next AsciiMath data block and read it out</li>
<li>n: Move to the next Nemeth data block and read it out</li>
<li>m: move to the next MathML data block and read</li>
<li>t: move to the next text block and read it</li>
<li>tab: move to the next interactive block (math block) and read it out</li>
</ul>
<p>The following key gestures can be used to edit contents</p>
<ul>
<li>ctrl+x: cut the current cursor block</li>
<li>ctrl+c: copy the current cursor block</li>
<li>ctrl+v: Paste content after the current cursor block</li>
<li>delete/back space: delete the current cursor block</li>
</ul>
<h3>Access8Math editor and Access8Math Document</h3>
<p>The edit area of Notepad in Windows 11 is rich editing area not traditional
editing area, so Access8Math editor must be used in Windows 11 to use the
writing feature. This editor provides such as opening old files, saving
files, and view feature.</p>
<p>Use the Access8Math editor to write markdown documents, and when document
have some resource, the resources can put into workspace of editor and be
referenced. When using export feature of the editor, the referenced
resources in the document will be packaged into a Archive file by
Access8Math editor.</p>
<p>The preview and export feature under the view menu are the same as the
command gesture view feature (alt+h), which can generate an Access8Math
Document. The only difference between the two is that the Access8Math editor
will package referenced resources into a archive file</p>
<p>In order to allow the document exported by the Access8Math editor to be
imported again and edited, the Access8Math editor will write a
Access8Math.json when exporting, which is the meta data. We call the archive
file/folder containing this meta is Access8Math Document</p>
<p>In File Explorer, you can press the NVDA+application, if the selected path
is txt/Access8Math Document, a virtual context menu will open, which can
quickly open this file to view or edit it.</p>
<h3>content example:</h3>
<ul>
<li>LaTeX(bracket): The solution of the quadratic equation in one variable
(ax<sup>2</sup>+bx+c=0) is (\frac{-b\pm\sqrt{b<sup>2</sup>-4ac}}{2a}) .</li>
<li>LaTeX(dollar): The solution of the quadratic equation in one variable
$ax<sup>2</sup>+bx+c=0$ is $\frac{-b\pm\sqrt{b<sup>2</sup>-4ac}}{2a}$ .</li>
<li>AsciiMath: The solution of the quadratic equation in one variable
<code>ax^2+bx+c=0</code> is <code>x=(-b+- \sqrt(b^2-4ac))/(2a)</code> .</li>
<li>Nemeth(UEB): The solution of the quadratic equation in one variable
<em>%⠁⠭⠘⠆⠐⠬⠃⠭⠬⠉⠀⠨⠅⠀⠴</em>: is <em>%⠭⠀⠨⠅⠀⠹⠤⠃⠬⠤⠜⠃⠘⠆⠐⠤⠲⠁⠉⠻⠌⠆⠁⠼</em>: .</li>
<li>Nemeth(at): The solution of the quadratic equation in one variable
@⠁⠭⠘⠆⠐⠬⠃⠭⠬⠉⠀⠨⠅⠀⠴@ is @⠭⠀⠨⠅⠀⠹⠤⠃⠬⠤⠜⠃⠘⠆⠐⠤⠲⠁⠉⠻⠌⠆⠁⠼@ .</li>
<li>MathML: The solution of the quadratic equation in one variable ax2+bx+c=0
is −b±b2−4ac2a
.</li>
</ul>
<h2>settings</h2>
<p>All Access8Math settings are centralized in tools -> Access8Math->Settings</p>
<h3>Reading Settings</h3>
<ul>
<li>Language: Access8Math read language</li>
<li>Analyze mathematical meaning of content: perform semantic analysis on the
mathematical content, and when it meets a specific rule, using that rule
to speak.</li>
<li>show interaction window when entering interaction navigation mode: Whether
to show "Access8Math interaction window" when active event entering
interaction navigation mode on math object</li>
<li>Reading pre-defined meaning in dictionary in interaction navigation mode:
When the pattern is definied in the dictionary, use dictionary to read the
meaning of subpart in the upper layer part.</li>
<li>Reading of auto-generated meaning in interaction navigation mode: When the
pattern is not difined or incomplete in dictionary, use automatic
generation function to read the meaning of subpart in the upper layer
part.</li>
<li>use tone indicate to no move in interaction navigation mode</li>
<li>Item interval time: Setting break time between items. Values from 1 to
100, the smaller the value, the shorter the break time, and the greater
the value, the longer the break time.</li>
</ul>
<h3>Writing Settings</h3>
<ul>
<li>Activate command gesture at startup</li>
<li>Activate block navigate gesture at startup</li>
<li>Activate shortcut gesture at startup</li>
<li>Use audio indicate to switching of browse navigation mode</li>
<li>HTML document display:</li>
<li>HTML math display:</li>
<li>LaTeX delimiter:</li>
</ul>
<h3>Rule setting: Setting whether rules are actived</h3>
<h3>Math reader</h3>
<ul>
<li>Speech source:</li>
<li>Braille source:</li>
<li>Interact source:</li>
</ul>
<h2>localization</h2>
<p>If you want Access8Math to have speech/braille output for MathML in different languages, you need to create a Unicode dictionary (unicode.dic) and mathematical rules (math.rule). This can be done using the GUI in Access8Math -> Localization, or by referring to the globalPlugins/Access8Math/locale in the plugin folder.</p>
<p>The "Unicode Dictionary" enables you to customize speech or braille output
for symbols and characters. The "Mathematics Rules" allow you to customize
speech or braille output for different types of mathematics.</p>
<p>"New language" dialog can adding language not included in Access8Math
built-in. Upon Adding language option will appear in the Reading Settings
language selection, Allowing for the Definition of speech/braille via the
Unicode Dictionary and Mathematics Rules, Resulting in Localization.</p>
<h3>Pravidlá čítania</h3>
<p>Access8Math establishes mathematical rules according to the mathematical
type and logic to decide the reading math method and order. According to
different local math reading logic, the math reading text and order can be
changed. The method is as follows:</p>
<p>Edit: After entering the "math rule", the window lists 46 math rules. Choose
any math rule and select the "Edit" to enter the editing entry.</p>
<p>Režim úpravy pozostáva z dvoch častí. Poradie čítania a vnorené objekty.</p>
<ul>
<li>Serialized ordering: Math rule is divided into multiple blocks according
to the reading order. In this area, the reading order of child node and
the delimitation text of start, inter- and the end can be changed. Taking
the fractional rule mfrac as an example, this rule is divided into five
reading blocks. The order 0, 2, and 4 represent the initial prompt, the
project segmentation prompt, and the end prompt, respectively, and the
meanings text can be changed in each field. Order 1 and 3 adjust the
reading sequence of child node which can be changed in the drop-down menu.</li>
<li>Vnorený blok (Child role): Vnorený blok v interpretovanom zápise. V zlomku
ide o konkrétne hodnoty čitateľa a menovateľa.</li>
</ul>
<p>Príklad (example): Po nastavení pravidla čítania môžete skontrolovať výstup
po aktivovaní tohto tlačidla. Zobrazí sa skúšobný matematický zápis, v
ktorom môžete overiť fungovanie pravidla.</p>
<p>Obnoviť nastavenia (Recover default): Obnoví nastavenia pravidiel a zmaže
vlastné definície.</p>
<p>Import: Umožňuje importovať pravidlá čítania matematického obsahu zo súboru.</p>
<p>Export: Uloží aktuálne pravidlá čítania matematického obsahu do súboru.</p>
<h2>example</h2>
<p>Math contents in Wiki are all written by MathML.</p>
<ul>
<li>Quadratic equation: https://en.wikipedia.org/wiki/Quadratic_equation</li>
<li>Násobenie matíc (anglicky):
https://en.wikipedia.org/wiki/Matrix_multiplication</li>
<li>Kubické rovnice (anglicky): https://en.wikipedia.org/wiki/Cubic_function</li>
</ul>
<p>Kvadratická rovnica</p>
<ul>
<li>LaTeX: (x=\frac{-b\pm\sqrt{b<sup>2</sup>-4ac}}{2a})</li>
<li>AsciiMath: <code>x=(-b+- \sqrt(b^2-4ac))/(2a)</code></li>
<li>MathML: -b±b2-4ac2a</li>
</ul>
<p>github: https://github.com/tsengwoody/Access8Math</p>
<p>Ďakujeme za postrehy a návrhy na zlepšenie!</p>
<h1>Access8Math update log</h1>
<h2>Access8Math v3.6 Update</h2>
<ul>
<li>new feature: Nemeth Braille Input, with the same functionality as LaTeX
input. Allows for real-time interactive navigation (Alt+I) during editing
and supports outputting HTML+MathML documents.</li>
<li>new feature: Added Nemeth delimiter UEB/at(@@) for distinguish Nemeth
content.</li>
<li>new feature: You can convert and copy LaTeX from Math object in
interactive navigation mode.</li>
<li>Added the NVDA+Shift+F10 shortcut to open virtual context menu in the file
explorer.</li>
<li>Fixed and optimized localized UI issues and cleaned localized file format.</li>
</ul>
<h2>Access8Math v3.5 Update</h2>
<ul>
<li>Vectors and rays can be distinguished correctly</li>
<li>Utilizing dialogue to display image, video, or audio resources in an
Access8Math HTML document</li>
<li>Using a new window to open link resources in an Access8Math HTML document</li>
<li>The MathML namespace is exported when copying MathML from the Math object
in interactive navigation mode</li>
<li>Display font adjustment, find and replace feature in Access8Math editor</li>
<li>Compatibility with NVDA 2023.1</li>
</ul>
<h2>Access8Math v3.4 Update</h2>
<ul>
<li>Speech, Braille, and interactive source move to Preferences -> Settings ->
Math Reader category.</li>
<li>Integrated MathCAT, you can choose what speech, braille, and interactive
source(Access8Math/Math Player/MathCAT) you need in Math Reader settings
panel when having already installed Math Player/MathCat.</li>
<li>Used MultiCategorySettingsDialog to collect settings dialog.</li>
<li>Press NVDA+alt+e open text file with the built-in editor in File Explore.</li>
<li>In virtual menus, submenu can open by enter</li>
<li>Implenment MathML menclose tag rule</li>
<li>new feature: virtual context menu in File Explorer. It can quickly open
Access8Math Document to view or edit it(Please read "Access8Math editor
and Access8Math Document" section to know detail information)</li>
</ul>
<h2>Access8Math v3.3 Update</h2>
<ul>
<li>Add built-in editor using traditional editing area because of windows 11
changed to UIA editing area</li>
<li>built-in editor new/open/save feature</li>
<li>Access8Math language initial setting is based on NVDA language setting</li>
<li>Improved speech and braille display in virtual menus</li>
<li>Compatibility with NVDA 2022.1</li>
<li>Fixed marked menu cannot open when document is empty</li>
<li>Fixed translate LaTeX/AsciiMath feature</li>
<li>Fixed HTML document rendering problem when HTML document display setting
choice text option</li>
</ul>
<h2>Access8Math v3.2 Update</h2>
<ul>
<li>New feature "<code>" to separate data blocks, the blocks enclosed by "</code>" are
AsciiMath data</li>
<li>New feature editing-shortcut for browse navigation mode cut (ctrl+x), copy
(ctrl+c), paste (ctrl+v), delete (delete/back space)</li>
<li>New feature moving-shortcut for browse navigation mode move between
interactive data blocks (tab), move between AsciiMath data blocks (a)</li>
<li>Change move cursor way in browse navigation mode - move cursor way with
up, down, left and right arrow keys and read out the contents of the data
block after the movement.</li>
<li>When the cursor moves in the browse navigation mode, the math data block
will read the serialized textual content of math instead of the source
code</li>
<li>When the cursor is in the math data block in the browse navigation mode,
press the space or enter key to interact with the math data block.</li>
<li>New feature English letters as shortcut keys that can be setted</li>
<li>New feature greek alphabet shortcut gesture</li>
<li>Shortcut key input is only apply in the LaTeX area</li>
<li>set using audio or speech indicate to switching of browse navigation mode</li>
<li>The LaTeX command menu can be opened in the text area and insert LaTeX
separators when LaTeX command inserting</li>
<li>New feature translation menu, which can convert the LaTeX/AsciiMath data
format of the block where the cursor is located. It belongs to the command
gesture group. When the cursor is in the LaTeX/AsciiMath block, press
alt+t to open the translation menu (in the browse navigation mode, ctrl+t)</li>
<li>New feature batch menu, which can convert the entire document
LaTeX/AsciiMath data format to each other, and can convert the LaTeX
separator between brackets and dollar. It belongs to the command gesture
group. Press alt+b to open the batch menu</li>
<li>Added MathML block type, support alt+i, single letter navigation "m", tab
movement in browse navigation mode</li>
<li>New feature braille custom-defined math rules and unicode dictionary,
which are the same as speech</li>
<li>The exported HTML can show with markdown</li>
<li>The exported HTML is added page title and file name by notepad window
title.</li>
</ul>
<h2>Access8Math v3.1 Update</h2>
<ul>
<li>HTML windows are now presented as virtual menu</li>
<li>Fixed an issue where the HTML view cannot be converted when text include
"`" character</li>
<li>When the number of words in the document is greater than 4096, the content
will not be converted to HTML view</li>
<li>Added mathematical set LaTeX commands</li>
<li>Update alt+m to insert "(", ")" LaTeX marks before and after the
currently selected text (when there is no selected text, it is the current
cursor position)</li>
<li>In the General settings, you can choose whether the math content in the
exported HTML is presented on a separate line(block/inline)</li>
<li>When exporting HTML, save the original text file in the compressed file</li>
<li>In the general settings, you can choose to use bracket or money symbol as
the LaTeX delimiter</li>
<li>In the general settings, you can choose the source of speech, braille, and
interaction(Access8Math or Math Player)</li>
<li>Activate/deactivate write/block navigate/shortcut gesture by gesture</li>
<li>switch the source of speech/braille/interact source by gesture(Access8Math
or Math Player)</li>
</ul>
<h1>Access8Math v3.0 Update</h1>
<ul>
<li>Write mathematical content in AsciiMath</li>
<li>Write mathematical content in LaTeX</li>
<li>Writing mixed content (text content and mathematical content)</li>
<li>Use shortcut keys to move the cursor to different types of blocks in edit
field</li>
<li>Use command menu to select commands in edit field</li>
<li>Set shortcuts in the LaTeX command menu</li>
<li>Review and export content in edit field to HTML</li>
</ul>
<h1>Access8Math v2.6 Update</h1>
<ul>
<li>Auto entering interactive mode when showing Access8Math interaction
window.</li>
<li>You can choose how to hint no movement in interactive mode: beep or speech
'no move' two way.</li>
<li>The content of the current item will be repeated again When there is no
movement.</li>
</ul>
<h1>Access8Math v2.5 Update</h1>
<ul>
<li>Adding Russian translation of rules and UI. Thanks to the translation work
of Futyn-Maker.</li>
<li>Fixing compound symbol translation failed bug.</li>
<li>Removing duplicates of lowercase letters and added general uppercases in
en unicode.dic(0370~03FF).</li>
</ul>
<h1>Access8Math v2.4 Update</h1>
<ul>
<li>Opravené drobné chyby.</li>
</ul>
<h1>Access8Math v2.3 Update</h1>
<ul>
<li>Compatibility with Python3</li>
<li>refactoring module and fix code style</li>
<li>Adding one symbol vector rule</li>
</ul>
<h1>Access8Math v2.2 Update</h1>
<ul>
<li>fix bug incorrect speech when a single node has more characters.</li>
<li>Fix compatibility issue in NVDA 2019.2, thanks to pull requests of
CyrilleB79.</li>
<li>Fix bug in unicode dict has duplicate symbols.</li>
<li>Add translations in French, thanks to the translation work of CyrilleB79.</li>
<li>Adjust keyboard shortcut.</li>
</ul>
<h1>v2.1</h1>
<ul>
<li>Vo všeobecných nastaveniach (general settings) je možné začiarknuť
automatické zobrazenie okna s interakciou (položka showing Access8Math
interaction window when entering interaction mode).</li>
<li>V okne s obsahom zobrazenom cez doplnok je možné okno s interakciou
zobraziť ručne skratkou ctrl+m.</li>
<li>Opravené problémy s prepínaním jazykov.</li>
<li>Add translations in Turkish, thanks to the translation work of cagri
(çağrı doğan).</li>
<li>Upravené pre NVDA 2019.1.</li>
<li>Prerobený zdrojový kód dialógov.</li>
</ul>
<h1>v2.0</h1>
<ul>
<li>Možnosť pridávať nové jazyky a tiež možnosť upravovať slovníky a pravidlá
čítania matematického obsahu.</li>
<li>Slovník unicode (Unicode dictionary) umožňuje upraviť výslovnosť
matematických symbolov.</li>
<li>Pravidlá (mathrule) umožňujú upraviť čítanie komplexných zadaní. Tlačidlom
example (príklad) je možné následne overiť zadané pravidlo.</li>
<li>Nový jazyk (New language adding): Umožňuje pridaťnový jazyk. Tento jazyk
je možné nastaviť vo všeobecných nastaveniach a následne ho použiť na
interpretáciu matematického obsahu. Pre každý nový jazyk môžete definovať
samostatné pravidlá čítania a symboly v slovníku Unicode.</li>
<li>V okne s obbsahom môžete na čítanie riadka použiť numerické číslice 7 - 9.</li>
</ul>
<h1>v1.5</h1>
<ul>
<li>Pridaná možnosť nastaviť pauzu, ktorá sa použije medzi jednotlivými
položkami pri interpretovaní matematického obsahu. Akceptované sú hodnoty
medzi 0 až 100. Menšie číslo znamená kratšiu pauzu a opačne.</li>
<li>Opravená chyba, ktorá spôsobovala nemožnosť uložiť nastavenia v NVDA
2018.2.</li>
</ul>
<h1>v1.4</h1>
<ul>
<li>Nastavenia sú teraz rozdelené do dvoch dialógov. Všeobecné nastavenia
(general settings) sú nastavenia doplnku. Nastavenia ppravidiel (rule
settings) určujú, ktoré pravidlá sa budú používať pri interpretácii
matematického obsahu.</li>
<li><p>Pridané nové pravidlá</p>
<ul>
<li>vector rule: When there is a "⇀" right above two Identifier, the item
is read as "Vector...".</li>
<li>frown rule:When there is a " ⌢ " right above two Identifier, the item
is read as "frown...".</li>
</ul>
</li>
<li><p>Opravené drobné chyby.</p></li>
</ul>
<h1>Access8Math v1.3 update log</h1>
<ul>
<li><p>Nové pravidlo</p>
<ul>
<li>Kladné čísla: Namiesto "+" číta "kladné"</li>
<li>Mocnina štvorcové: Ak je umocnené na 2, prečíta ako "squared"
(štvorcové).</li>
<li>Mocnina kubické: Ak je umocnené na 3, číta ako "cubed" (kubické).</li>
<li>line rule: When there is "↔" right above two Identifier, the item is
read as "Line ...".</li>
<li>line segment rule: When there is "¯" right above two Identifier, the
item is read as "Line segement ...".</li>
<li>ray rule: When there is a "→" right above two Identifier, the item is
read as "Ray ..."</li>
</ul>
</li>
<li><p>Add interaction window: Pressing "Space" in math content to open
"Access8Math interaction window" which contains "interaction" and "copy"
button.</p>
<ul>
<li>Po aktivovaní tlačidla interakcia (interaction) môžete prezerať
matematický obsah po častiach.</li>
<li>Kopírovanie (copy): skopíruje zdrojový kód zápisu do schránky.</li>
</ul>
</li>
<li><p>Pridané a aktualizované preklady.</p></li>
<li>Upravené spracovanie pravidiel pridaním vzťahmi medzi pravidlami.</li>
<li>Opravené drobné chyby.</li>
</ul>
<h1>v1.2</h1>
<ul>
<li><p>Nové pravidlo</p>
<ul>
<li>Pridané pravidlo pre záporné čísla: Namiesto "mínus" číta "záporné".</li>
<li>Pravidlo pre celé čísla: Prečíta 'add' medzi celkom a zlomkom ak
zlomok je celkom predošlej položky.</li>
</ul>
</li>
<li><p>Upravená architektúra kódu</p>
<ul>
<li>Pridaná trieda sibling.</li>
<li>Pridaná trieda dynamic generate Complement</li>
</ul>
</li>
<li><p>Opravené drobné problémy</p></li>
</ul>
<h1>v1.1</h1>
<ul>
<li>Počas navigácie je možné skratkou ctrl+c skopírovať zdrojový kód zápisu do
schránky.</li>
<li><p>Pridané okno s nastaveniami:</p>
<ul>
<li>Vlastný jazyk pre čítanie matematického obsahu.</li>
<li>Analyzovať obsah (Analyze the mathematical meaning of content):
Analyzuje obsah a ak nájde vhodné pravidlá, aplikuje ich pri čítaní
matematického obsahu.</li>
<li>Použiť slovník (Read defined meaning in dictionary): Ak existuje
zadané pravidlo v slovníku, použije sa na čítanie pri čítaní
aktuálneho aj vnoreného obsahu v zápise.</li>
<li>Pridaná možnosť Použiť slovník (Read defined meaning in dictionary):
Ak existuje zadané pravidlo v slovníku, použije sa na čítanie pri
čítaní aktuálneho aj vnoreného obsahu v zápise.</li>
</ul>
</li>
<li><p>Pridané zjednodušené pravidlá. Zjednodušené pravidlá sú zjednodušené
interpretácie pravidiel. Ak má obsah len jednu položku, môžete zrušiť
čítanie počiatočných a koncových textov.</p></li>
<li>Aktualizovaný slovník Unicode</li>
<li>Opravené drobné chyby.</li>
</ul>
Rýchle službyhttp://addons.nvda-project.org/addons/textInformation.sk.html2023-05-10T20:38:33Z2018-05-05T15:13:43Z
<ul>
<li>Autor: Carter Temm</li>
<li>Stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=txtinfo">stabilnú verziu</a></li>
</ul>
<p>Doplnok vyhľadáva informácie pomocou externých služieb na základe vybratého
textu. Vyhľadanie informácie spustíte klávesovou skratkou.</p>
<p>Doplnok je distribuovaný pod licenciou GNUGeneral Public License, od verzie
2. Podrobnosti si môžete prečítať v súbore copying.txt.</p>
<h2>Klávesové skratky</h2>
<p>Predpokladá sa, že používate anglické rozloženie klávesnice. Ak to tak nie
je, možno budete musieť zmeniť skratky v dialógu Klávesové skratky.</p>
<ul>
<li>Nvda+; (bodkočiarka): Analyzuj a zisti informáciu o vybratom texte</li>
<li>Nvda+shift+; (bodkočiarka): Analyzuj a zisti informáciu o texte v schránke</li>
<li>Nvda+ctrl+; (bodkočiarka): Povie poslednú zistenú informáiu. Stlačené
dvakrát rýchlo za sebou zobrazí text v dialógu.</li>
</ul>
<h2>Podporované služby</h2>
<p>Doplnok podporuje tieto funkcie:</p>
<ul>
<li>Zistenie informácie o IP adrese zo služby IPInfoDB API. Priamo v doplnku
je integrovaný API kľúč. Ak nebude fungovať, môžete si vyenerovať vlastný
a vložiť ho do súboru <strong>init</strong>.py.</li>
<li>Anglický slovník princeton wordnetweb. Databáza nepatrí medzi najlepšie,
aktuálne napríklad neobsahuje vysvetlenia a významy pre slová could, you a
pod.</li>
<li>Zisťovanie ISBN čísla publikácií cez Google Books API</li>
<li>Overovanie typu kreditnej karty</li>
</ul>
<p>Na overovanie dát sa používajú regulárne výrazy. Zatiaľ neoverujeme
e-mailové adresy a telefónne čísla. Toto sa môže časom zmeniť.</p>
<h2>Príspevok</h2>
<p>Ak máte návrhy, môžete poslať PR alebo použiť tieto kontakty:</p>
<p>twitter: @cartertemm</p>
<p>email: crtbraille@gmail.com</p>
Čítanie po vetáchhttp://addons.nvda-project.org/addons/sentenceNav.sk.html2023-05-10T20:38:33Z2018-01-25T05:02:56Z
<ul>
<li>Autor: Tony Malykh</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=sentencenav">stable version</a> (compatible with NVDA 2019.3 and beyond)</li>
</ul>
<p>Pridáva do NVDA možnosť čítania po vetách.</p>
<p>Please note that "Jump to next paragraph with text" feature has been move to
<a href="http://github.com/mltony/nvda-text-nav/">TextNav</a> add-on that needs to be
installed separately.</p>
<h2>Klávesové skratky</h2>
<ul>
<li>Alt+Down: Go to next sentence.</li>
<li>Alt+Up: Go to previous sentence.</li>
<li>NVDA+alt+S: Prečítaj aktuálnu vetu.</li>
<li>Alt+Windows+Down: Go to next phrase.</li>
<li>Alt+Windows+Up: Go to previous phrase.</li>
</ul>
<p>Please note that "Jump to next paragraph with text" feature has been move to
<a href="http://github.com/mltony/nvda-text-nav/">TextNav</a> add-on that needs to be
installed separately.</p>
<h2>Notes and known issues</h2>
<ul>
<li>Sentence markup is done by heuristic algorithms and is not 100%
accurate. Expect SentenceNav to occasionally make mistakes, such as
breaking a sentence where it's not supposed to be broken or the other way
around - missing a border between two sentences and speaking them
together.</li>
<li>Experimental support for Microsoft Word and WordPad has been added as of
version 2.8.</li>
<li>Sentence navigation keystrokes Alt+Up/Down might conflict with built-in
keystrokes in applications. SentenceNav developers strive to resolve these
conflicts whenever possible. However, if you encounter such a situation, a
simple workaround is to press NVDA+F2 (Pass next key through), followed by
the conflicting keystroke Alt+Up/Down to make sure that this keystroke
would be processed by the application and not by SentenceNav.</li>
</ul>
<h2>Algorithm</h2>
<p>SentenceNav uses a regular expression to find sentence boundaries. The
regular expression is looking for:</p>
<ul>
<li>One or more "Sentence breaker" punctuation marks, such as period,
exclamation sign or question sign, followed immediately by one or more
spaces.</li>
<li>Sentence breakers can optionally be followed by one or more "Skippable"
punctuation signs, such as closing parenthesis, or a quote.</li>
<li>Sentence breakers can optionally be followed by a Wikipedia-style
reference, e.g. [4], or [citation needed].</li>
<li>Sentence breakers must not be preceded by any of the exceptional
abbreviations, such as Dr., Mr., Prof., etc. Exceptional abbreviations are
language-dependent. Exceptional abbreviations are defined as abreviations
spelled with a period, which in most cases does not indicate the end of
the sentence.</li>
<li>Sentence breakers must not be preceded by a single capital letter. This is
to prevent sentences being broken at people's initials, such as George
R. R. Martin. The list of capital letters is language-dependent.</li>
<li>Alternatively, the regular expression can match one of the full-width
sentence breakers. Full-width punctuation is used in some languages, like
Chinese and Japanese and there is no requirement to be followed or
preceded by anything to be counted as the boundary of sentences.</li>
<li>Alternatively, double new line counts as a sentence breaker.</li>
</ul>
<p>Phrase detection is performed by another regular expression, that matches:</p>
<ul>
<li>One or more "phrase breakers" punctuation marks followed immediately by
one or more spaces.</li>
<li>Or alternatively, one or more "fixed-width" phrase brakers, with no
requirement of being followed by spaces.</li>
<li>Or alternatively, double new line.</li>
</ul>
<h2>Other settings</h2>
<ul>
<li>Reconstruct sentences across multiple paragraphs: sentences can span
across multiple paragraphs. This often happnes in malformed PDF documents,
or in email messages written as plain text. With this combo box you can
tell SentenceNav to try to identify those sentences and speak them
correctly. Sometimes however, it would speak paragraphs together that are
not meant to be sentences. In this case you can disable that feature.</li>
<li>Disable SentenceNav in applications: You can disable SentenceNav in
certain applications. For example, some applications use Alt+Down
keystroke to perform other functions. This is a comma-separated blacklist
of applications where sentence navigation will be disabled. If you are not
sure what should be the name of your application, switch to that
application, Press NVDA+Control+Z to open up NVDA console and type:
"focus.appModule.appName" without quotes to obtain the name of current
application.</li>
</ul>
<h2>Source code</h2>
<p>Source code is available at <a href="http://github.com/mltony/nvda-sentence-nav">http://github.com/mltony/nvda-sentence-nav</a>.</p>
<h2>Downloads</h2>
<ul>
<li>Current stable version:
<a href="https://github.com/mltony/nvda-sentence-nav/releases/latest/download/SentenceNav.nvda-addon">SentenceNav</a></li>
<li>Last Python 2 version (compatible with NVDA 2019.2 and prior):
<a href="https://github.com/mltony/nvda-sentence-nav/releases/download/v2.5/SentenceNav-2.5.nvda-addon">SentenceNav
v2.5</a></li>
</ul>
Rozšírenie pre Braillehttp://addons.nvda-project.org/addons/brailleExtender.sk.html2024-02-13T14:36:10Z2018-01-03T19:52:47Z
<ul>
<li>Author: André-Abush Clause and contributors</li>
<li>NVDA compatibility: 2019.3 and beyond</li>
<li>Stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=brlext">stabilnú verziu</a></li>
<li>Stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=brlext-dev">vývojovú verziu</a></li>
</ul>
<p>BrailleExtender is an <a href="http://nvda-project.org/">NVDA</a> add-on that provides
various features at braille level. Currently, the following features are
implemented:</p>
<ul>
<li>reload two favorite braille display with shortcuts.</li>
<li>automatic review cursor tethering in terminal role like in PuTTY,
Powershell, bash, cmd.</li>
<li>auto scroll.</li>
<li>switch between several input/output braille tables.</li>
<li>mark the text with special attributes through dot 7, dot 8 or both.</li>
<li>use two output braille tables simultaneously.</li>
<li>display tab signs as spaces.</li>
<li>reverse forward scroll and back scroll buttons.</li>
<li>say the current line during text scrolling either in review mode, or in
focus mode or both.</li>
<li>translate text easily in Unicode braille and vice versa. E.g.: z <--> ⠵.</li>
<li>convert cell description to Unicode braille and vice versa. E.g.: 123 <-->
⠇.</li>
<li>lock braille keyboard.</li>
<li>launch an application/URL with gesture.</li>
<li>braille dictionaries.</li>
<li>type with one-hand from braille keyboard.</li>
<li>display undefined characters from braille tables (including emojis) using
altenative representations.</li>
<li>enter any character from braille keyboard (including emojis).</li>
<li>skip blank lines during text scrolling.</li>
<li>and much more!</li>
</ul>
<p>Pre niektoré braillovské riadky pridaná podpora pre nasledujúce funkcie:</p>
<ul>
<li>offer complete gesture maps including function keys, multimedia keys,
quick navigation, etc.;</li>
<li>emulate modifier keys, and thus any keyboard shortcut;</li>
<li>offer several keyboard configurations concerning the possibility to input
dots 7 and 8, enter and backspace;</li>
<li>add actions and quick navigation through a rotor.</li>
</ul>
<p>Once the add-on is installed, read the documentation and go through the
settings using the BrailleExtender submenu (located in the NVDA menu).</p>
<h2>Let's explore some common features</h2>
<h3>Representation of undefined characters</h3>
<p>The extension allows you to customize how an undefined character should be
represented within a braille table. To do so, go to the — Representation of
undefined characters — settings. You can choose between the following
representations:</p>
<ul>
<li>Use braille table behavior (no description possible)</li>
<li>Dots 1-8 (⣿)</li>
<li>Dots 1-6 (⠿)</li>
<li>Empty cell (⠀)</li>
<li>Other dot pattern (e.g.: 6-123456)</li>
<li>Question mark (depending on output table)</li>
<li>Other sign/pattern (e.g.: ??)</li>
<li>Hexadecimal</li>
<li>Hexadecimal, HUC8</li>
<li>Hexadecimal, HUC6</li>
<li>Decimal</li>
<li>Octal</li>
<li>Binary</li>
</ul>
<p>You can also combine this option with the “describe the character if
possible” setting.</p>
<p>Notes:</p>
<ul>
<li>To distinguish the undefined set of characters while maximizing space, the
best combination is the usage of the HUC8 representation without checking
the “Show punctuation/symbol name for undefined characters if available”
option.</li>
<li>To learn more about the HUC representation, see
<a href="https://danielmayr.at/huc/">https://danielmayr.at/huc/</a></li>
<li>Keep in mind that definitions in tables and those in your table
dictionaries take precedence over character descriptions, which also take
precedence over the chosen representation for undefined characters.</li>
</ul>
<h3>Getting Current Character Info</h3>
<p>This feature allows you to obtain various information regarding the
character under the cursor using the current input braille table, such as:
the HUC8 and HUC6 representations; the hexadecimal, decimal, octal or binary
values; A description of the character if possible; the Unicode braille
representation and the braille pattern dots.</p>
<p>Pressing the defined gesture associated to this function once shows you the
information in a flash message and a double-press displays the same
information in a virtual NVDA buffer.</p>
<p>On supported displays the defined gesture is ⡉+space. No system gestures are
defined by default.</p>
<p>For example, for the '&' character, we will get the following information:</p>
<blockquote><p>&: 0x26, 38, 0o46, 0b100110<br />
and (AMPERSAND [Po])<br />
⢿ (1234568)<br />
⣥⣺⡧, ⠿⠺⠏⠏</p></blockquote>
<h3>Advanced braille input</h3>
<p>This feature allows you to enter any character from its HUC8 representation
or its hexadecimal/decimal/octal/binary value. Moreover, it allows you to
develop abbreviations. To use this function, enter the advanced input mode
and then enter the desired pattern. Default gestures: NVDA+Windows+i or
⡊+space (on supported displays). Press the same gesture to exit this
mode. Alternatively, an option allows you to automatically exit this mode
after entering a single pattern. If you want to enter a character from its
HUC8 representation, simply enter the HUC8 pattern. Since a HUC8 sequence
must fit on 3 or 4 cells, the interpretation will be performed each time 3
or 4 dot combinations are entered. If you wish to enter a character from its
hexadecimal, decimal, octal or binary value, do the following:</p>
<ol>
<li>Enter ⠼</li>
<li><p>Specify the basis as follows:</p>
<ul>
<li>⠭ or ⠓: for a hexadecimal value</li>
<li>⠙: for a decimal value</li>
<li>⠕: for an octal value</li>
<li>⠃: for a binary value</li>
</ul>
</li>
<li><p>Enter the value of the character according to the previously selected
basis.</p></li>
<li>Press Space to validate.</li>
</ol>
<p>For abbreviations, you must first add them in the dialog box — Advanced
input mode dictionary —. Then, you just have to enter your abbreviation and
press space to expand it. For example, you can define the following
abbreviations: "⠎⠺" with "sandwich", "⠋⠛⠋⠗" to "🇫🇷".</p>
<p>Here are some examples of sequences to be entered for given characters:</p>
<table>
<thead>
<tr>
<th> Character </th>
<th> HUC8 </th>
<th> Hexadecimal </th>
<th> Decimal </th>
<th> Octal </th>
<th> Binary </th>
</tr>
</thead>
<tbody>
<tr>
<td> 👍 (thumbs up) </td>
<td> ⣭⢤⡙ </td>
<td> ⠭1f44d or ⠓1f44d </td>
<td> ⠙128077 </td>
<td> ⠕372115 </td>
<td> ⠃11111010001001101 </td>
</tr>
<tr>
<td> 😀 (grinning face) </td>
<td> ⣭⡤⣺ </td>
<td> ⠭1f600 or ⠓1f600 </td>
<td> ⠙128512 </td>
<td> ⠕373000 </td>
<td> ⠃11111011000000000 </td>
</tr>
<tr>
<td> 🍑 (peach) </td>
<td> ⣭⠤⠕ </td>
<td> ⠭1f351 or ⠓1f351 </td>
<td> ⠙127825 </td>
<td> ⠕371521 </td>
<td> ⠃11111001101010001 </td>
</tr>
<tr>
<td> 🌊 (water wave) </td>
<td> ⣭⠤⠺ </td>
<td> ⠭1f30a or ⠓1f30a </td>
<td> ⠙127754 </td>
<td> ⠕371412 </td>
<td> ⠃11111001100001010 </td>
</tr>
</tbody>
</table>
<p>Note: the HUC6 input is currently not supported.</p>
<h3>One-hand mode</h3>
<p>This feature allows you to compose a cell in several steps. This can be
activated in the general settings of the extension's preferences or on the
fly using NVDA+Windows+h gesture by default (⡂+space on supported
displays). Three input methods are available.</p>
<h4>Method #1: fill a cell in 2 stages on both sides</h4>
<p>With this method, type the left side dots, then the right side dots. If one
side is empty, type the dots correspondig to the opposite side twice, or
type the dots corresponding to the non-empty side in 2 steps.</p>
<p>For example:</p>
<ul>
<li>For ⠛: press dots 1-2 then dots 4-5.</li>
<li>For ⠃: press dots 1-2 then dots 1-2, or dot 1 then dot 2.</li>
<li>For ⠘: press 4-5 then 4-5, or dot 4 then dot 5.</li>
</ul>
<h4>Method #2: fill a cell in two stages on one side (Space = empty side)</h4>
<p>Using this method, you can compose a cell with one hand, regardless of which
side of the Braille keyboard you choose. The first step allows you to enter
dots 1-2-3-7 and the second one 4-5-6-8. If one side is empty, press
space. An empty cell will be obtained by pressing the space key twice.</p>
<p>For example:</p>
<ul>
<li>For ⠛: press dots 1-2 then dots 1-2, or dots 4-5 then dots 4-5.</li>
<li>For ⠃: press dots 1-2 then space, or 4-5 then space.</li>
<li>For ⠘: press space then 1-2, or space then dots 4-5.</li>
</ul>
<h4>Method #3: fill a cell dots by dots (each dot is a toggle, press Space to validate the character)</h4>
<p>In this mode, each dot is a toggle. You must press the space key as soon as
the cell you have entered is the desired one to input the character. Thus,
the more dots are contained in the cell, the more ways you have to enter the
character.</p>
<p>For example, for ⠛, you can compose the cell in the following ways:</p>
<ul>
<li>Dots 1-2, then dots 4-5, then space.</li>
<li>Dots 1-2-3, then dot 3 (to correct), then dots 4-5, then space.</li>
<li>Dot 1, then dots 2-4-5, then space.</li>
<li>Dots 1-2-4, then dot 5, then space.</li>
<li>Dot 2, then dot 1, then dot 5, then dot 4, and then space.</li>
<li>Etc.</li>
</ul>
Navigácia po odsadeniachhttp://addons.nvda-project.org/addons/indentNav.sk.html2024-02-13T14:36:12Z2018-01-03T19:52:47Z
<ul>
<li>Autor: Tony Malykh</li>
<li>Stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=indentnav">stabilnú verziu</a></li>
</ul>
<p>Umožňuje rýchlo nájsť odseky s rovnakým odsadením. V prehliadačoch umožňuje
vyhľadať odseky s rovnakým, prípadne menším alebo väčším odsadením. Takto je
možné rýchlo sa orientovať v strome s komentármi. Pri programovaní môže byť
doplnok užitočný pri hľadaní kódu s rovnakým, prípadne menším alebo väčším
odsadením.</p>
<h2>Použitie v režime prehliadania</h2>
<p>Skratkou nvda+alt+šípka dole preskočíte na odsek s rovnakým odsadením, ako
má aktuálny odsek. NVDA+alt+šípka hore vyhľadá predchádzajúci odsek s
rovnakým odsadením. Takto môžere napríkald rýchlo vyhľadať kkomentáre prvej
úrovne (napríklad na reddit.com).</p>
<p>Jednoducho povedané, doplnok funguje všade tam, kde je dostupný objekt so
stromovou štruktúrou.</p>
<p>Klávesové skratky:</p>
<ul>
<li>NVDA+alt+šípky hore a dole: preskočí na predchádzajúci alebo nasledujúci
odsek s rovnakým odsadením.</li>
<li>NVDA+alt+ľavá šípka: Prejdi na predchádzajúci odsek s menším odsadením.</li>
<li>NVDA+alt+pravá šípka: Prejdi na nasledujúci odsek s väčším odsadením.</li>
</ul>
<h2>Použitie v textových editoroch</h2>
<p>Doplnok môže byť užitočný pri programovaní. Jazyky ako napríklad Python
vyžadujú odsadenie kódu, mnohé ďalšie to tiež a odporúčajú. Nvda+alt+šípky
hore a dole prejdú na predchádzajúci alebo nasledujúci riadok s rovnakým
odsadením. Nvda+alt+ľavá šípka prejde na rodičovský riadok, teda
predchádzajúci riadok s menším odsadením. V Pythone takto môžete rýchlo
skočiť na definíciu funkcie alebo triedy. NVDA+alt+pravá šípka prejde na
potomka aktuálneho riadka, teda nasledujúci riadok s väčším odsadením.</p>
<p>Ak máte zapnuté oznamovanie odsadenia pípaním, NVDA pri preskakovaní zapípa
riadky, ktoré boli preskočené. Ak máte toto oznamovanie vypnuté, budete
počuť len prasknutie indikujúce, že boli preskočené riadky.</p>
<p>Klávesové skratky:</p>
<ul>
<li>Nvda+alt+šípky hore a dole: Prejde na predchádzajúci alebo nasledujúci
riadok s tým istým odsadením, a,o má aktuálny riadok.</li>
<li>NVDA+Alt+Ctrl+šípky hore a dole: Vynútiť skočenie na predchádzajúci alebo
nasledujúci riadok s rovnakým odsadením. Ak je to potrebné, Skočí na iné
bloky s rovnakým odsadením.</li>
<li>NVDA+alt+ľavá šípka: Prejdi na rodiča: Predchádzajúci riadok s menším
odsadením.</li>
<li>NVDA+alt+pravá šípka: Prejdi na potomka - nasledujúci riadok s väčším
odsadením.</li>
</ul>
<h2>Zmeny</h2>
<ul>
<li><a href="https://github.com/mltony/nvda-indent-nav/raw/master/releases/IndentNav-1.2.nvda-addon">v1.2</a>
<ul>
<li>Pridaná podpora lokalizácie do iných jazykov.</li>
<li>Do zdrojových súborov doplnená GPL hlavička.</li>
<li>Malé úpravy.</li>
</ul>
</li>
<li><a href="https://github.com/mltony/nvda-indent-nav/raw/master/releases/IndentNav-1.1.nvda-addon">v1.1</a>
<ul>
<li>Prvé vydadnie.</li>
</ul>
</li>
</ul>
Vylepšenia pre aplikácie Mozillahttp://addons.nvda-project.org/addons/mozillaScripts.sk.html2024-02-13T14:36:02Z2017-12-18T17:28:07Z
<ul>
<li>Autor: Javi Dominguez</li>
<li>stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=moz">stabilnú verziu</a></li>
</ul>
<p>Poskytuje vylepšenia pre aplikácie od spoločnosti Mozilla.</p>
<h2>Firefox</h2>
<ul>
<li>NVDA+A (rozloženie desktop) a NVDA+ctrl+a (rozloženie laptop): Prečíta
adresný riadok. Stlačené dvakrát rýchlo za sebou skopíruje adresu do
schránky.</li>
<li>NVDA+end (desktop) a nvda+shift+end (laptop): Prečíta stavový
riadok. Stlačené dvakrát rýchlo za sebou skopíruje informáciu do schránky.</li>
<li>NVDA+f8: Zobrazí zoznam záložiek. Stlačené dvakrát rýchlo za sebou
presunie fokus na panel nástrojov.</li>
<li>NVDA+ctrl+n: Zobrazí posledné upozornenie a presunie naň fokus. Stlačené
dvakrát rýchlo za sebou zobrazí históriu upozornení.</li>
<li>NVDA+F6: Presunie fokus do dokumentu.</li>
</ul>
<h2>Thunderbird</h2>
<ul>
<li>In a message window:
<ul>
<li>Control+Shift+(1-4) Reads the sender and recipients of the message. If pressed twice quickly, opens the options menu.</li>
<li>Control+Shift+5 Reads the subject of the message.</li>
<li>Control+Shift+6 Reads date of the message.</li>
<li>Control+Shift+A Brings the focus to the list of attachments, if any.
(These scripts are also available in the list of messages if you activate the preview pane.)</li>
</ul>
</li>
<li>In the bar of fast filtering:
<ul>
<li>Press down Arrow to display more options, enter to check/unchek the selected option.</li>
</ul>
</li>
<li>In messages list:
<ul>
<li>If the preview pane is active, press NVDA+downArrow (desktop) or NVDA+A (laptop) to read the message without leaving the list.</li>
<li>Control+NVDA+1-9 moves between columns.</li>
<li>NVDA+H Displays a dialog in which you can change the order of the columns in the message list.</li>
</ul>
</li>
</ul>
<p>Skratky si môžete upraviť. Stačí ak z otvoreného okna Firefoxu alebo Thunderbirdu vyvoláte dialóg klávesové skratky.</p>
Vyslov jazyk klávesnicehttp://addons.nvda-project.org/addons/sayCurrentKeyboardLanguage.sk.html2024-03-26T20:46:20Z2017-07-09T06:29:40Z
<ul>
<li>Author(s): Abdel, Noelia.</li>
</ul>
<h1>Prezentácia</h1>
<p>Doplnok bol vytvorený ako reakcia na požiadavku jedného člena komunity.</p>
<p>It provides a script without gesture, which allows to retrieve and give the
language of the current keyboard.</p>
<p>Stlačené dvakrát rýchlo za sebou oznámi jazyk systému.</p>
<p>Pôvodne išlo len o globálny plugin, ktorýu bolo potrebné pre jeho správnu
funkčnosť skopírovať do adresára s nastaveniami a konfiguráciou NVDA, neskôr
bol prerobený na doplnok.</p>
<h2>Poznámky</h2>
<p>To set a gesture to the script giving the keyboard language, follow these
steps:</p>
<ul>
<li>Open the NVDA's menu, with "NVDA + N";</li>
<li>Go to NVDA's preferences menu;</li>
<li>Then go to the submenu "Input gestures".</li>
<li>Then select the category "Input", and open it with right arrow.</li>
<li>Go to the item labeled "Gives the language of the keyboard in use, if
pressed twice, give the default language of the system";</li>
<li>Once done, press Alt + A to add a gesture, and type "NVDA + F4" or another
gesture of your choice;</li>
<li>This done, press the up arrow once, you hear "your chosen gesture, all
layout";</li>
<li>Validate on enter, then tab to OK then enter;</li>
<li>Your chosen gesture should then call the script giving keyboard language.</li>
</ul>
<h2>Kompatibilita</h2>
<ul>
<li>This add-on is compatible with the versions of NVDA ranging from 2019.3
and beyond.</li>
</ul>
<h2>Changes for 20240326.0.0</h2>
<ul>
<li>Updated compatibility for nvda-2024.1.;</li>
<li>Deleted download link from readme, the download link for future updates
will now only be available from the add-on store.</li>
</ul>
<h2>Changes for 20231229.0.0</h2>
<ul>
<li>Added a backward compatible implementation to support speak on demand
mode, which will soon be available with nvda-2024.1.</li>
</ul>
<h2>Changes for 20230729.0.0</h2>
<ul>
<li>Applied the flake8 and mypy rules to the code;</li>
<li>Changed the minimum supported NVDA version to 2019.3 to support
annotations introduced in Python 3.</li>
<li>Removed the "NVDA + F4" gesture calling the script giving the keyboard
language., to allow users to choose their preferred gesture.</li>
</ul>
<h2>Changes for version 20230426.0.0 and beyond</h2>
<ul>
<li>Upravené číslovanie verzie, posledná verzia NVDA kompatibilná s doplnkom
podľa odporúčaní.</li>
</ul>
<h2>Verzia 19.02</h2>
<ul>
<li>Zmenené číslovanie verzií. Teraz sa používa systém yy.mm (dve číslice pre
rok a dve pre mesiac);</li>
<li>Added compatibility with the new versioning format of add-on, appeared
since nvda 2019.1.</li>
</ul>
<h2>Verzia 1.1</h2>
<ul>
<li>Doplnok premenovaný z getCurKeyboardLanguage na sayCurrentKeyboardLanguage
(anglicky);</li>
<li>Pridaná GPL licencia;</li>
<li>Pridaná skratka do kategórie systém;</li>
<li>Opravené chyby v kóde.</li>
</ul>
<h2>Verzia 1.0</h2>
<ul>
<li>Prvé vydanie.</li>
</ul>
Signalizovanie objektovhttp://addons.nvda-project.org/addons/objLocationTones.sk.html2023-05-25T07:07:11Z2017-05-28T18:03:20Z
<ul>
<li>Autor: Joseph Lee</li>
<li>Stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=objLocTones">stabilnú verziu</a></li>
<li>NVDA compatibility: 2022.4 and later</li>
<li>Note: this add-on is no longer actively maintained since 2021.</li>
</ul>
<p>Tento doplnok signalizuje zvukom polohu zameraného objektu. Signalizovanie
sa aktivuje automaticky po zapnutí doplnku a reštarte NVDA. Signalizovanie
vypnete zakázaním alebo odinštalovaním doplnku.</p>
<p>Dôležité:</p>
<ul>
<li>Ak používate iné doplnky na signalizovanie (napr Audiothemes), odporúčame
tento doplnok zakázať.</li>
<li>Ak je prvok mimo obrazovky, neprehrávajú sa žiadne zvuky.</li>
</ul>
Enhanced Ariahttp://addons.nvda-project.org/addons/enhancedAria.sk.html2023-05-10T20:38:33Z2017-05-21T02:11:59Z
<ul>
<li>Author: Jose Manuel Delicado</li>
<li>Legacy add-on: NVDA 2019.3 and later can read articles on the web</li>
<li>NVDA compatibility: 2017.4 to 2019.2</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=earia">stable version</a></li>
</ul>
<p>This addon allows you to customize which aria landmarks are reported by NVDA
when you browse the Internet.</p>
<p>Its functionality is very simple. Once installed, open your webbrowser and
visit the web as usual. The default aria landmarks reported by Firefox and
Chrome will also be visible in Internet Explorer, so you will be able to
press quick navigation keys to jump between them, and list them by pressing
NVDA+f7 in all browsers. Read the NVDA User Guide for more information.</p>
<p>The addon adds an extra landmark not included by default in NVDA, the
article (abbreviated in Braille as art).</p>
<h2>The configuration dialog</h2>
<p>You can enable or disable landmarks by going to NVDA, preferences, Enhanced
Aria Settings or from the appropriate category in the NVDA options
dialog. The dialog has a checkbox for each landmark. If you disable a
landmark, you won't be able to jump to it pressing the d key when browsing a
webpage, and NVDA won't report it.</p>
<h2>Contact info</h2>
<p>This addon has been developed by Jose Manuel Delicado. If you want to
contact me, send an e-mail to jm.delicado@nvda.es, or open an issue on
GitHub at https://github.com/jmdaweb/enhancedAria</p>
<h2>Changelog</h2>
<h3>Version 2.8</h3>
<ul>
<li>New and updated translations.</li>
<li>Updated NVDA compatibility flags.</li>
</ul>
<h3>Version 2.7</h3>
<ul>
<li>Updated compatibility flags for recent NVDA versions.</li>
<li>New and updated translations.</li>
</ul>
<h3>Version 2.6</h3>
<ul>
<li>Updated compatibility flags for recent NVDA versions. This version is only
compatible with NVDA 2017.4 and above.</li>
<li>New and updated translations.</li>
<li>Now, the configuration is automatically applied after switching NVDA
profiles and restoring settings to factory defaults.</li>
</ul>
<h3>Version 2.5</h3>
<ul>
<li>Updated compatibility flags for recent NVDA versions.</li>
</ul>
<h3>Version 2.4</h3>
<ul>
<li>Now, settings are removed only when the add-on is
uninstalled. Configuration is nolonger reset when upgrading.</li>
<li>New and updated translations.</li>
</ul>
<h3>Version 2.3</h3>
<ul>
<li>Added compatibility with recent NVDA releases.</li>
<li>New translations.</li>
</ul>
<h3>Version 2.2</h3>
<ul>
<li>Fixed a fatal error when a Braille display was used and the article role
was configured to be reported.</li>
</ul>
<h3>Version 2.1</h3>
<ul>
<li>Stability improvements</li>
</ul>
<h3>Version 2.0</h3>
<ul>
<li>Added support for multi-category settings dialog available on NVDA 2018.2
and later</li>
<li>Added Python 3 compatibility</li>
<li>Now guiHelper module is used to create the addon interface</li>
</ul>
<h3>Version 1.3</h3>
<ul>
<li>Added configobj specification for addon settings</li>
</ul>
<h3>Version 1.2</h3>
<ul>
<li>Bugs fixed</li>
</ul>
<h3>Version 1.1</h3>
<ul>
<li>Fixed issues which prevented opening the addon settings dialog when
reverting to NVDA saved configuration</li>
</ul>
Lambdahttp://addons.nvda-project.org/addons/lambda.sk.html2024-02-13T14:36:24Z2017-05-19T19:04:32Z
<ul>
<li>Autor: Alberto Zanella a ďalší.</li>
<li>Stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=lambda">stabilnú verziu</a></li>
<li>Stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=lambda-dev">vývojovú verziu</a></li>
</ul>
<p>Doplnok zlepšuje prístupnosť matematického editora Lambda. Ide o upravenú verziu pôvodného kódu od Petra Leckého z Univerzity Komenského.
LAMBDA (Linear Access to Mathematic for Braille Device and Audio-synthesis) je matematický editor špeciálne vyvinutý tak, aby uľahčoval zapisovanie matematických výpočtov nevidiacim s použitím braillovského riadka alebo hlasového výstupu.
Program LAMBDA vznikol vďaka podpore z fondou Európskej únie. Viac sa dočítate na <a href="https://www.lambdaproject.org/">https://www.lambdaproject.org (anglicky)</a>.<br />
Aktuálna verzia doplnku obsahuje Taliansku a Španielsku braillovskú tabuľku
(Slovenská zatiaľ nie je súčasťou). Doplnok je preložený do viacerých
jazykov (vrátane slovenčiny). Ak by ste chceli prispieť a napríklad viete
pomôcť s pridaním slovenskej tabuľky, kontaktujte autorov, alebo sa
prihláste do mailinglistu (V Taliančine alebo Angličtine).</p>
<p><strong>Upozorňujeme:</strong> Doplnok vznikol vo voľnom čase a jeho autorom je Alberto Zanella. Autor ale nie je vývojárom samotného editora LAMBDA. V prípade problémov s editorom LAMBDA sa prosím obráďte na vášho dodávateľa. Ak máte priamo problémy s doplnkom, kontaktujte autora doplnku alebo hláste chybu cez odkaz "Issues" cez Github.</p>
<h3><a href="https://github.com/lambda-nvda/lambdaNvda/">Repozitár na Github</a></h3>
<h2>Vlastnosti:</h2>
<h3>Podpora pre hlasové výstupy:</h3>
<ul>
<li>Správne oznamovanie položiek v menu a dialógov;</li>
<li>Pridaná podpora pre prirodzené čítanie zápisu;</li>
<li>Pridaná možnosť čítania po znakoch, slovách, riadkoch a tiež plynulé
čítanie;</li>
<li>Pridané oznamovanie výberu a zmeny výberu bloku (CTRL+B a SHIFT+CTRL+B);</li>
<li>Pridané oznamovanie pri pohybe kurzorom príkazmi Windows a Lambda;</li>
<li>Podporované všetky režimi reči (nastavíte v menu nástroje);</li>
<li>Pridané správne interpretovanie dialógov (kalkulačka, Matrix, štruktúra);</li>
<li>Pridané správne oznamovanie symbolov pri zapnutom oznamovaní napísaných
znakov;</li>
</ul>
<h3>Podpora pre braillovské riadky:</h3>
<ul>
<li>Doplnok nainštaluje a aktivuje braillovskú tabuľku. Pre rôzne jazyky je
možné použiť rôzne tabuľky. Tabuľky boli vyrobené z tabuliek pre JAWS
(súbory jbt);</li>
<li>Doplnok vytvorí samostatný profil, v ktorom nastaví braillovskú
tabuľku. Takto sa zaistí, že tabuľka sa načíta len pri aktívnom okne
LAMBDA;</li>
<li>Pridané správne oznamovanie dialógov a menu na braillovskom riadku;</li>
<li>Obsah editačných polí sa správne zobrazuje na riadku a na posúvanie je
možné použiť tlačidlá braillovského riadka;</li>
<li>Od verzie 1.1.0 je možné zobrazovať výstup na braillovskom riadku dvoma
spôsobmi. Ak je aktívna funkcia "použiť display model", na zobrazenie sa
použije tzv. display model. Toto je užitočné, ak potrebujete presne
sledovať kurzor na obrazovke, vrátane bielych znakov. Ak vypnete použitie
display modelu, NVDA bude používať Windows api. Zobrazenie bude
stabilnejšie, ale nedokáže správne interpretovať biele znaky. Preto kurzor
nesleduje zobrazenie v prípade, že prechádzate cez biele znaky.</li>
</ul>
<p>Predvolene je aktívny tzv. display model. Môžete ho vypnúť skratkou
nvda+shift+f.</p>
<p>Odporúčame ho vypnúť, ak používate vlastné rozlíšenie obrazovky.</p>
<ul>
<li>Zjednodušená štruktúra dialógov a odstránené nadbytočné opakovanie;</li>
<li>Pridané správne oznamovanie vybratých blokov bodmi 7 a 8 a správne sa
aktualizujú vybraté bloky pri zmene pomocou skratiek ctrl+b a
ctrl+shift+b.</li>
</ul>
<h2>Prvé spustenie.</h2>
<p>Doplnok pri prvom spustení vytvorí profil "lambda" pre aplikáciu
"lambda.exe". V profile je nastavená výstupná braillovská tabuľka, zviazanie
braillovského kurzora s prezeracím kurzorom a aktivovanie display modelu.</p>
<p>Ak takýto profil existuje, doplnok ho neupraví a je potrebné upraviť
nastavenia ručne.</p>
<p>Situáciu môžete vyriešiť použitím sprievodcu nastavením profilu. Sprievodcu
vyvoláte skratkou nvda+alt+r z okna LAMBDA.</p>
<p>Riešením je tiež odstránenie profilu LAMBDA. Otvorte menu NVDA a aktivujte
položku konfiguračné profily.</p>
<p>Tu odstráňte profil LAMBDA. Profil sa automaticky nanovo vytvorí pri
nasledujúcom spustení LAMBDA editora.</p>
<p>Zmazanie profilu môže pomôcť aj vtedy, ak sa doplnok správa
neštandardne. Napríklad ak sa nenastaví správna tabuľka.</p>
<p>Pri každom spustení LAMBDA editora doplnok overí, či existuje profil. Ak
nie, vytvorí ho a nastaví tieto parametre:</p>
<pre><code>filename : userData\profiles\lambda.ini :
[braille]
readByParagraph = False
tetherTo = focus
translationTable = path-to-the-addon-brailleTable-dir\tableName
[lambda]
brailleFlatMode = True
</code></pre>
<p>Vysvetlenie:</p>
<ul>
<li>path-to-the-addon-brailleTable-dir : je absolútna cesta doplnku +
"\brailleTables"</li>
<li>Názov tabuľky: V súčasnosti sú v doplnku tabuľky pre Taliančinu
lambda-ita.utb a Španielčinu lambda-esp.utb.</li>
</ul>
<h2>Klávesové skratky:</h2>
<ul>
<li><strong>NVDA+Shift+f</strong>: Zapína a vypína použitie display modelu;</li>
<li><strong>NVDA+alt+r</strong>: Otvorí sprievodcu nastavením konfiguračného profilu;</li>
<li><strong>NVDA+d</strong>: skopíruje vybratý riadok (odporúčame použiť namiesto
predvolenej skratky LAMBDA ctrl+d).</li>
</ul>
<h2>Známe problémy:</h2>
<p>Pre chybu v LAMBDA editore NVDA nesprávne oznamuje medzery v týchto
situáciách:</p>
<ul>
<li>Ak vložíte slová ako "space" alebo "Espacio", NVDA ich bude čítať v
nastavenom jazyku NVDA.</li>
<li>Rozhranie reči LAMBDA neoznamuje správne prázdne riadky. Namiesto toho
oznamuje slovo "medzera". Toto môže zahŕňať prázdny riadok, ale aj riadok
so slovom "medzera".</li>
</ul>
<h2>Tipy</h2>
<p>Toto sú odporúčania pre lepšie použitie doplnku.</p>
<ul>
<li>Ak chcete v LAMBDE oznamovať napísané znaky pri písaní, otvorte okno
editora. Následne aktivujte čítanie napísaných znakov skratkou nvda+2
(alebo z nastavení NVDA > klávesnica). V LAMBDE v menu nástroje aktivujte
funkciu echo. Takto zaistíte oznamovanie napísaných znakov v LAMBDE a
súčasne to neovplyvní nastavenie pre iné aplikácie.</li>
</ul>
<h2>mailing list:</h2>
<p>Ak chcete nahlásiť chyby, alebo máte nápady na vylepšenia, môžete sa
prihlásiť do nášho mailinglistu (anglicky). Stránka na prihlásenie je
<a href="https://groups.io/g/lambda-nvda">https://groups.io/g/lambda-nvda</a>.</p>
<h2>Zmeny</h2>
<p>Nasleduje zoznam zmien. V zátvorkách uvádzame aj stav vývoja. Aktuálna
vývojová verzia nie je označená, keďže môže byť zahodená.</p>
<h3>Verzia 1.3.0 (stabilná)</h3>
<ul>
<li>Pridaná podpora pre nové verzie NVDA (podpora pre Python 3)</li>
<li>Skratka NVDA+D viac po stlačení na prázdnom riadku neprilepí obsah
schránky. Vytvorí nový prázdny riadok.</li>
</ul>
<h3>Verzia 1.2.2 (stabilná)</h3>
<ul>
<li>Upravené pre WX Python version 4 (predstavené v NVDA 2018.3). Do logu sa
viac nezapisujú upozornenia wx.NewId().</li>
<li>Upravené zobrazenie dialógov.</li>
<li>Nové a aktualizované preklady.</li>
</ul>
<h3>Version 1.2.1a (stabilná)</h3>
<p>Toto je stabilná verzia a neplánujeme vydať novú verziu do júna 2018, aby
sme zaistili funkčnosť pre študentov do konca semestra.</p>
<ul>
<li>Nové a aktualizované preklady.</li>
</ul>
<h3>Verzia 1.2.1 (stabilná)</h3>
<ul>
<li>Pridaná podpora pre braillovský výstup predstavený v NVDA 2017.3. Funguje
aj na starších verziách NVDA.</li>
<li>Opravené problémy so zobrazením na braillovských riadkoch.</li>
</ul>
<h3>Verzia 1.2.0 (vývojová)</h3>
<p>Nebola vydaná ako stabilná, lebo verzia 1.2.1 obsahovala výrazné úpravy.</p>
<ul>
<li>Nové a aktualizované preklady.</li>
</ul>
<h3>Verzia 1.1.8 (stabilná)</h3>
<ul>
<li>Prvé stabilné vydanie.</li>
</ul>
História rečihttp://addons.nvda-project.org/addons/speech_history.sk.html2024-02-13T14:38:20Z2017-05-16T14:06:26Z
<ul>
<li>Autor: James Scholes</li>
<li>Stiahnuť <a href="https://is.gd/speechHistory2023_1">stabilnú verziu</a></li>
</ul>
<p>An updated version of the Clip Copy add-on, initially created by Tyler
Spivey. The add-on allows you to review the most recent 100 items spoken by
NVDA, as well as copy the selected item to the clipboard. By default, use
Shift+F11 to move back through the history, Shift+F12 to move forwards and
F12 on its own to copy the selected item. These hotkeys can be updated from
within the Speech category of NVDA's Input gestures dialog.</p>
Čítanie hesielhttp://addons.nvda-project.org/addons/speakPasswords.sk.html2023-05-10T20:38:33Z2017-05-03T02:11:11Z
<ul>
<li>Autor: Tyler Spivey</li>
<li>Fuunguje s NVDA 2019.3</li>
<li>Stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=spp">Stabilnú verziu</a></li>
</ul>
<p>Číta napísané znaky pri písaní v heslových editačných poliach. Nedokáže však
rozpoznať už napísané heslá.</p>
<h2>Použitie</h2>
<p>Po nainštalovaní doplnku stačí len aktivovať čítanie po znakoch alebo po
slovách. NVDA bude automaticky čítať heslá aj v heslových editačných
poliach.</p>
<p>Ak nechcete čítať znaky napísané do heslových editačných polí, vypnite
čítanie napísaných znakov a slov, alebo odinštalujte doplnok.</p>
Oznamovanie schránkyhttp://addons.nvda-project.org/addons/clipspeak.sk.html2024-02-13T14:37:44Z2017-05-02T03:33:48Z
<h2>Informácie</h2>
<ul>
<li>Authors: "Rui Fontes, Ângelo Abrantes, Abel Passos Júnior and colaboration
of Noelia Ruiz Martínez, based on the work of Damien Sykes-Lindley</li>
<li>Aktualizované 10/04/2022</li>
<li>Stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=clipspeak">stabilnú verziu</a></li>
<li>Kompatibilné s NVDA 2019.3 a novším</li>
</ul>
<h2>Prezentácia</h2>
<p>Tento doplnok automaticky oznamuje vykonané operácie so schránkou
(kopírovanie, prilepenie, vystrihnutie) a tiež najčastejšie operácie pri
úprave textu, ako je krok späť.</p>
<p>Aby sme zabránili nežiadúcim situáciám, doplnok kontroluje prvok a tiež
schránku a na základe toho rozhodne, či je potrebné oznámiť zmenu.</p>
<p>V nastaveniach doplnku (menu NVDA, možnosti, oznamovanie schránky) je možné
nastaviť, či chcete oznamovať len operáciu, alebo aj obsah textu, ktorý ste
do schránky skopírovali alebo vystrihli.</p>
<p>Predvolene sú skratky doplnku nastavené pre angličtinu:</p>
<ul>
<li>Ctrl+z: Vrátiť späť</li>
<li>Ctrl+y: zopakovať</li>
<li>Ctrl+x: Vystrihnúť</li>
<li>Ctrl+c: Kopírovať</li>
<li>Ctrl+v: Prilepiť</li>
</ul>
<p>Ak sa vo vašej verzii systému Windows používajú na tieto operácie iné
klávesové skratky, zmeňte ich aj pre tento doplnok v nastaveniach v dialógu
klávesové skratky.</p>
<h2>Automatické aktualizácie</h2>
<p>Doplnok môže automaticky kontrolovať aktualizácie vždy po štarte NVDA. Toto
je možné nastaviť v menu NVDA, možnosti, nastavenia v časti Oznamovanie
schránky.</p>
Kopírovanie textu pod prezeracím kurzoromhttp://addons.nvda-project.org/addons/reviewCursorCopier.sk.html2023-05-10T20:38:33Z2017-04-19T18:32:49Z
<ul>
<li>Autor: Tuukka Ojala <a href="mailto:tuukka.ojala@iki.fi">tuukka.ojala@iki.fi</a></li>
<li>Stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=reviewCursorCopier">stabilnú verziu</a></li>
<li>Stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=rccp-dev">vývojovú verziu</a></li>
</ul>
<p>Umožňuje kopírovať text, ktorý je pod prezeracím kurzorom. Dostupné sú tieto
príkazy:</p>
<ul>
<li>Skopírovať riadok</li>
<li>Skopírovať slovo</li>
<li>Skopírovať od začiatok riadka po kurzor</li>
<li>Skopírovať od kurzora do konca riadka</li>
<li>Skopírovať od začiatku slova po kurzor</li>
<li>Skopírovať od kurzora po koniec slova</li>
</ul>
<p>Klávesové skratky nie sú nastavené a na ich nastavenie musíte použiť dialóg
klávesové skratky. Všetky sú v kategórii prezeranie textu. Ak potrebujete
pomoc s nastavovaním klávesových skratiek, pozrite si príslušnú kapitolu v
používateľskej príručke NVDA.</p>
<h2>Licencia</h2>
<p>Doplnok jedistribuovaný pod licenciou GNU General Public License, verzia 2.</p>
Klasický výberhttp://addons.nvda-project.org/addons/classicSelection.sk.html2023-05-10T20:38:33Z2016-12-24T18:55:43Z
<ul>
<li>Autor: Tyler Spivey</li>
<li>Stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=clsel">stabilnú verziu</a></li>
</ul>
<p>Tento doplnok upravuje príkazy NVDA na označovanie textu tak, ako sa
používali do verzie 2016.3.</p>
<p>Po nainštalovaní doplnku použite na kopírovanie do schránky skratku
nvda+f10. Aktuálne správanie vyžaduje dvojité stlačenie tejto skratky,
pričom na skopírovanie textu musí byť text označený. Toto v niektorých
prípadoch nie je možné (napríklad vo Windows konzole).</p>
<p>V dialógu klávesové skratky pozrite časť Klasický výber, kde môžete nastaviť
klávesové skratky. Predvolene sa používajú skratky nvda+F9 a nvda+F10.</p>
ObjPadhttp://addons.nvda-project.org/addons/objPad.sk.html2023-05-10T20:38:33Z2016-09-26T17:11:24Z
<ul>
<li>Author: Christopher Duffley <a href="mailto:nvda@chrisduffley.com">nvda@chrisduffley.com</a>, originally by Joseph
Lee, Cleverson Uliana and others</li>
<li>Stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=objPad">stabilnú verziu</a></li>
<li>NVDA compatibility: 2022.4 and later</li>
</ul>
<p>Pridáva klávesové skratky na navigáciu a prácu s prvkami.</p>
<h2>Príkazy</h2>
<ul>
<li>Ctrl+NVDA+TAB: prepína medzi dostupnými režimami (popísané nižšie).</li>
</ul>
<h2>Režimi prezerania</h2>
<p>Dostupné sú 4 režimi:</p>
<ul>
<li>Predvolený: Šípky pohybujú kurzorom tak, ako ste zvyknutí.</li>
<li>Objektový: Šípky prechádzajú na nasledujúci alebo predchádzajúci objekt
resp. na rodiča alebo potomka objektu.</li>
<li>Webový: Šípky prechádzajú medzi prvkami v režime prehliadania.</li>
<li>skenovací: prechádza medzi objektmi, pričom ignoruje hierarchiu objektov.</li>
</ul>
<p>V objektovom režime sú dostupné tieto príkazy:</p>
<ul>
<li>Pravá šípka: Nasledujúci objekt.</li>
<li>Ľavá šípka: predchádzajúci objekt.</li>
<li>Šípka hore: Rodičovský (nadradený objekt).</li>
<li>Šípka dole: Potomok (podradený objekt).</li>
<li>Medzera alebo enter: Aktivovať.</li>
</ul>
<p>Webový režim (môžete sa pohybovať po prvkoch ako oblasti, prvky formulára,
nadpisy, rámce, tabuľky a zoznamy).</p>
<ul>
<li>Pravá šípka: Nasledujúci prvok.</li>
<li>Ľavá šípka: Predchádzajúci prvok.</li>
<li>Šípka hore: Prejdi na predchádzajúci typ prvku.</li>
<li>Šípka dole: Prejdi na nasledujúci typ prvku.</li>
<li>Medzera alebo enter: Aktivovať.</li>
</ul>
<p>Skenovací režím:</p>
<ul>
<li>Šípka dole: Nasledujúci objekt, nasledujúci riadok.</li>
<li>Šípka hore: Predchádzajúci objekt, predchádzajúci riadok.</li>
<li>Pravá šípka: Nasledujúci znak.</li>
<li>Ľavá šípka: Predchádzajúci znak.</li>
<li>Ctrl+pravá šípka: Nasledujúce slovo.</li>
<li>Ctrl+ľavá šípka: Predchádzajúce slovo.</li>
<li>Medzera alebo enter: Aktivovať.</li>
</ul>
<h2>Version 23.05</h2>
<ul>
<li>To reflect the maintainer change, the manifest has been updated to
indicate as such.</li>
</ul>
<h2>Version 23.02</h2>
<ul>
<li>NVDA 2022.4 or later is required.</li>
<li>Windows 10 21H2 (November 2021 Update/build 19044) or later is required.</li>
</ul>
<h2>Version 23.01</h2>
<ul>
<li>NVDA 2022.3 or later is required.</li>
<li>Windows 10 or later is required as Windows 7, 8, and 8.1 are no longer
supported by Microsoft as of January 2023.</li>
</ul>
<h2>Version 22.06</h2>
<ul>
<li>Requires NVDA 2021.3 or later.</li>
</ul>
<h2>Version 21.04</h2>
<ul>
<li>Requires NVDA 2020.1 or later.</li>
</ul>
<h2>Verzia 20.01</h2>
<ul>
<li>Vyžaduje NVDA od verzie 2019.3.</li>
</ul>
<h2>Verzia 18.12</h2>
<ul>
<li>Príprava na podporu nasledujúcich verzií NVDA.</li>
</ul>
<h2>Verzia 18.09</h2>
<ul>
<li>Pridané preklady.</li>
<li>Objekty je možné aktivovať klávesom enter (aj na numerickom bloku).</li>
</ul>
<h2>Verzia 18.03</h2>
<ul>
<li>Prispôsobené pre NVDA 2018.1.</li>
</ul>
<h2>Verzia 16.12</h2>
<ul>
<li>Pridaný webový režim.</li>
</ul>
<h2>Verzia 16.10</h2>
<ul>
<li>Prvé vydanie.</li>
</ul>
Hlasové profilyhttp://addons.nvda-project.org/addons/switchSynth.sk.html2023-05-10T20:38:33Z2016-07-29T20:06:55Z
<ul>
<li>Autor: Tyler Spivey</li>
<li>Stiahnuť: <a href="https://www.nvaccess.org/addonStore/legacy?file=switchSynth">Verziu 1.02</a></li>
</ul>
<h1>Hlasové profily</h1>
<p>Umožňuje rýchle prepínanie medzi hlasovými výstupmi pomocou klávesových
skratiek. Ide o vylepšenú verziu doplnku switch_synth. Prosím, odinštalujte
staršiu verziu. Profily, ktoré ste uložili v staršej verzii doplnku budú
fungovať aj s touto verziou.</p>
<p>K dispozícii máte 6 pozícií. Prepínate sa medzi nimi skratkami
ctrl+shift+nvda+1 až ctrl+shift+nvda+6. Po stlačení skratky sa spustí
príslušný hlasový výstup aj s jeho nastaveniami. Ak chcete uložiť aktuálne
nastavenia do vybratého slotu, stlačte ctrl+shift+nvda+v.</p>
Čítať napísané symbolyhttp://addons.nvda-project.org/addons/reportSymbols.sk.html2024-03-10T18:25:01Z2016-07-28T15:07:21Z
<ul>
<li>Author: Noelia Ruiz Martínez.</li>
</ul>
<p>Oznamuje napísané symboly (nealfanumerické alebo aj prázdne znaky) a to aj v
prípade, ak je vypnuté čítanie napísaných znakov.</p>
<p>Je postavený na staršom doplnku od toho istého autora. Ak používate staršiu
verziu doplnku, nahraďte ju aktuálnou verziou.</p>
<h2>Možnosti</h2>
<ul>
<li>V nastaveniach môžete nastaviť oznamovanie jednotlivých symbolov.</li>
</ul>
<p>Ak si chcete nastaviť skratku na rýchly prístup k nastaveniam doplnku,
môžete tak urobiť v dialógu klávesové skratky, vetva možnosti.</p>
<h2>Changes for 8.0</h2>
<ul>
<li>Compatible with NVDA 2023.1.</li>
</ul>
<h2>Changes for 7.0</h2>
<ul>
<li>Compatible with NVDA 2022.1.</li>
</ul>
<h2>Changes for 6.0</h2>
<ul>
<li>Compatible with NVDA 2021.1.</li>
</ul>
<h2>Verzia 5.0</h2>
<ul>
<li>Vyžaduje NVDA od verzie 2019.3.</li>
</ul>
<h2>Verzia 4.0</h2>
<ul>
<li>Nastavenia doplnku boli presunuté do dialógu s nastaveniami NVDA.</li>
<li>Funguje s NVDA 2018.2</li>
<li>Môžete si stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=rsy-o">Verziu pre NVDA 2017.3</a>.</li>
</ul>
<h2>Verzia 3.0</h2>
<ul>
<li>Pridané možnosti nastaviť oznamovanie pre medzery, nové riadky a iné
symboly.</li>
</ul>
<h2>Verzia 2.0</h2>
<ul>
<li>Upravený vizuálny vzhľad dialógu, aby viac korešpondoval so vzhľadom NVDA.</li>
<li>Funguje s NVDA od verzie 2016.4.</li>
</ul>
<h2>Verzia 1.0</h2>
<ul>
<li>Prvé vydanie.</li>
</ul>
Station Playlisthttp://addons.nvda-project.org/addons/stationPlaylist.sk.html2024-03-20T16:04:12Z2016-07-26T17:42:18Z
<ul>
<li>Authors: Christopher Duffley <a href="mailto:nvda@chrisduffley.com">nvda@chrisduffley.com</a> (formerly Joseph Lee
<a href="mailto:joseph.lee22590@gmail.com">joseph.lee22590@gmail.com</a>, originally by Geoff Shang and other
contributors)</li>
<li>Stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=stationPlaylist">stabilnú verziu</a></li>
<li>NVDA compatibility: 2023.3.3 and later</li>
</ul>
<p>Doplnok zlepšuje prístupnosť Station Playlist Studio a ďalších pridružených
aplikácií a tiež umožňuje ovládať Station Playlist mimo hlavného okna
aplikácie. Podporuje tiež aplikácie Studio, Creator, Track Tool, VT
Recorder, Streamer, a tiež SAM, SPL, a AltaCast enkodéri.</p>
<p>For more information about the add-on, read the <a href="https://github.com/chrisDuffley/stationplaylist/wiki/SPLAddonGuide">add-on guide</a>.</p>
<p>Dôležité:</p>
<ul>
<li>This add-on requires StationPlaylist suite 5.40 or later.</li>
<li>Some add-on features will be disabled or limited if NVDA is running in
secure mode such as in logon screen.</li>
<li>For best experience, disable audio ducking mode.</li>
<li>Starting from 2018, <a href="https://github.com/ChrisDuffley/stationplaylist/wiki/splchangelog">changelogs for old add-on releases</a> will be found
on GitHub. This add-on readme will list changes from version 23.02 (2023)
onwards.</li>
<li>Z okna SPL studio je možné uložiť nastavenia skratkou ctrl+nvda+c. Môžete
tiež načítať uložené nastavenia skratkou ctrl+nvda+r. Takisto je možné
obnoviť pôvodné nastavenia skratkou nvda+ctrl+r stlačením trikrát rýchlo
za sebou. Toto sa týka aj nastavení enkodéra. Tieto je však možné len
uložiť alebo obnoviť.</li>
<li>Many commands will provide speech output while NVDA is in speak on demand
mode (NVDA 2024.1 and later).</li>
</ul>
<h2>Klávesové skratky</h2>
<p>Most of these will work in Studio only unless otherwise specified. Unless
noted otherwise, these commands support speak on demand mode.</p>
<ul>
<li>Alt+Shift+T from Studio window: announce elapsed time for the currently
playing track.</li>
<li>Control+Alt+T (two finger flick down in SPL touch mode) from Studio
window: announce remaining time for the currently playing track.</li>
<li>nvda+shift+F12 (švihnutie dvoma prstami hore v dotykovom režime) v okne
Studio: oznámi čas vysielania, napríklad 5 minút do celej hodiny. Stlačené
dvakrát rýchlo za sebou oznamuje minúty aj sekundy.</li>
<li>Alt+NVDA+1 (two finger flick right in SPL mode) from Studio window: Opens
alarms category in Studio add-on configuration dialog (does not support
speak on demand).</li>
<li>alt+nvda+1 pri úprave playlistu v okne creator a Remote VT playlist
editor: Oznámi plánovaný čas spustenia playlistu.</li>
<li>Alt+NVDA+2 pri úprave playlistu v okne creator a Remote VT playlist
editor: Oznámi celkový čas skladieb v playliste.</li>
<li>Alt+NVDA+3 from Studio window: Toggles cart explorer to learn cart
assignments (does not support speak on demand).</li>
<li>Alt+NVDA+3 pri úprave playlistu v okne creator a Remote VT playlist
editor: Oznámi čas odohratia vybratej skladby.</li>
<li>Alt+NVDA+4 pri úprave playlistu v okne creator a Remote VT playlist
editor: Oznámi kategóriu a rotáciu pre načítaný playlist.</li>
<li>Control+NVDA+f from Studio window: Opens a dialog to find a track based on
artist or song name. Press NVDA+F3 to find forward or NVDA+Shift+F3 to
find backward (does not support speak on demand).</li>
<li>Alt+NVDA+R from Studio window: Steps through library scan announcement
settings (does not support speak on demand).</li>
<li>Control+Shift+X from Studio window: Steps through braille timer settings
(does not support speak on demand).</li>
<li>Control+Alt+left/right arrow (while focused on a track in Studio, Creator,
Remote VT, and Track Tool): Move to previous/next track column (does not
support speak on demand).</li>
<li>Control+Alt+up/down arrow (while focused on a track in Studio, Creator,
Remote VT, and Track Tool): Move to previous/next track and announce
specific columns (does not support speak on demand).</li>
<li>Ctrl+NVDA+1 až 0 (Pri zobrazení skladby v okne Studio, Creator (vrátane
úpravy playlistu), Remote VT, a Track Tool): Oznámi príslušné metadáta
(prvých 10). Stlačené dvakrát rýchlo za sebou zobrazí metadáta v režime
prehliadania.</li>
<li>Control+NVDA+- (hyphen while focused on a track in Studio, Creator, Remote
VT, and Track Tool): display data for all columns in a track on a browse
mode window (does not support speak on demand).</li>
<li>NVDA+V while focused on a track (Studio's playlist viewer only): toggles
track column announcement between screen order and custom order (does not
support speak on demand).</li>
<li>Alt+NVDA+C while focused on a track (Studio's playlist viewer only):
announces track comments if any.</li>
<li>Alt+NVDA+0 from Studio window: Opens the Studio add-on configuration
dialog (does not support speak on demand).</li>
<li>Alt+NVDA+P from Studio window: Opens the Studio broadcast profiles dialog
(does not support speak on demand).</li>
<li>Alt+NVDA+F1: Open welcome dialog (does not support speak on demand).</li>
</ul>
<h2>Funkcie bez klávesových skratiek</h2>
<p>The following commands are not assigned by default; if you wish to assign
them, use Input Gestures dialog to add custom commands. To do so, from
Studio window, open NVDA menu, Preferences, then Input Gestures. Expand
StationPlaylist category, then locate unassigned commands from the list
below and select "Add", then type the gesture you wish to use.</p>
<p>Important: some of these commands will not work if NVDA is running in secure
mode such as from login screen. Not all commands support speak on demand.</p>
<ul>
<li>Switching to SPL Studio window from any program (unavailable in secure
mode, does not support speak on demand).</li>
<li>SPL Controller layer (unavailable in secure mode).</li>
<li>Announcing Studio status such as track playback from other programs
(unavailable in secure mode).</li>
<li>Announcing encoder connection status from any program (unavailable in
secure mode).</li>
<li>Podmnožina informačných príkazov.</li>
<li>Oznámiť čas vrátane sekúnd z okna Studio.</li>
<li>Oznámiť teplotu.</li>
<li>Oznámiť názov nasledujúcej naplánovanej skladby.</li>
<li>Oznámiť názov aktuálne prehrávanej skladby.</li>
<li>Označenie aktuálnej skladby ako počiatočnej na časovú analýzu.</li>
<li>Spustenie časovej analýzy.</li>
<li>Zobrazenie štatistiky playlistu.</li>
<li>Find text in specific columns (does not support speak on demand).</li>
<li>Find tracks with duration that falls within a given range via time range
finder (does not support speak on demand).</li>
<li>Quickly enable or disable metadata streaming (does not support speak on
demand).</li>
</ul>
<h2>Ďalšie príkazy pre enkodéry</h2>
<p>The following commands are available when using encoders, and the ones used
for toggling options for on-connection behavior such as focusing to Studio,
playing the first track, and toggling of background monitoring can be
assigned through the Input Gestures dialog in NVDA menu, Preferences, Input
Gestures, under the StationPlaylist category. These commands do not support
speak on demand.</p>
<ul>
<li>F9: Pripojiť zvolený stream.</li>
<li>F10 (SAM encoder): Odpojí zvolený stream.</li>
<li>Ctrl+F9: Pripojiť všetky streami.</li>
<li>Ctrl+F10 (len SAM encoder): odpojí všetky streami.</li>
<li>Control+Shift+F11: Toggles whether NVDA will switch to Studio window for
the selected encoder if connected.</li>
<li>Shift+F11: určuje, či sa automaticky prehrá prvá vybratá skladba po
pripojení na server.</li>
<li>Ctrl+F11: Zapína a vypína monitorovanie vybratého pripojenia na pozadí.</li>
<li>ctrl+F12: Otvorí okno na výber odstráneného streamu (kde môžete zmeniť
názvy a nastavenia).</li>
<li>Alt+NVDA+0 or F12: Opens encoder settings dialog to configure options such
as encoder label.</li>
</ul>
<p>In addition, column review commands are available, including (supports speak
on demand):</p>
<ul>
<li>Ctrl+NVDA+1: Pozícia enkodéra.</li>
<li>Ctrl+NVDA+2: Názov pripojenia.</li>
<li>Ctrl+nvda+3 z okna Sam Encoder: Formát.</li>
<li>Ctrl+nvda+3 z aplikácie SPL a AltaCast Encoder: Nastavenia enkodéra.</li>
<li>Ctrl+nvda+4 z okna SAM Encoder: Stav pripojenia.</li>
<li>Ctrl+NVDA+4 z aplikácie SPL a AltaCast Encoder: Stav a rýchlosť
pripojenia.</li>
<li>Ctrl+NVDA+5 z okna SAM Encoder: stav pripojenia.</li>
</ul>
<h2>Podmnožina informačných príkazov</h2>
<p>Táto podmnožina umožňuje zistiť stav SPL Studio, napríklad prehrávanie
skladby, celkové trvanie skladieb v časovom slote a podobne. Najprv je
potrebné stlačiť skratku podmnožiny príkazov a potom príslušné
písmeno. Väčšina príkazov je určených pre okno Studio a špeciálne pre
zobrazenie playlistu. V nastaveniach doplnku je navyše možné prepnúť skratky
tak, aby simulovali správanie, na ktoré ste zvyknutí z iných čítačov
obrazovky.</p>
<p>The available commands are (most commands support speak on demand):</p>
<ul>
<li>A: autopylot.</li>
<li>C (Shift+C v rozložení pre JAWS): Oznámi názov prehrávanej skladby.</li>
<li>C (JAWS layout): Toggle cart explorer (playlist viewer only, does not
support speak on demand).</li>
<li>D (R v rozložení pre JAWS): Oznámi ostávajúci čas do konca skladby. (Ak
nefunguje, zopakujte skratku zo zobrazenia playlistu).</li>
<li>E: Oznámi Stav streamovania metadát.</li>
<li>Shift+1 až Shift+4: Stav jednotlivých pripojení. Shift+0: Stav pre DSP
enkodér.</li>
<li>F: Find track (playlist viewer only, does not support speak on demand).</li>
<li>H: Oznámi Trvanie skladieb v aktuálnom hodinovom slote.</li>
<li>Shift+H: Oznámi zostávajúci čas skladieb v aktuálnom hodinovom slote.</li>
<li>I (L v rozložení pre JAWS): Oznámi počet pripojených poslucháčov.</li>
<li>K: Prejde na záložku (vyznačenú skladbu v zozname skladieb).</li>
<li>Ctrl+K: Nastaví aktuálnu skladbu ako záložku (v zobrazení playlistu).</li>
<li>L (Shift+L v rozložení JAWS): Line in.</li>
<li>M: Mikrofón.</li>
<li>N: Oznámi Názov nasledujúcej skladby.</li>
<li>P: Oznámi Stav prehrávania (prehrávanie alebo zastavené).</li>
<li>Shift+P: Oznámi tóninu skladby.</li>
<li>R (Shift+E v rozložení JAWS): zapína a vypína nahrávanie do súboru.</li>
<li>Shift+R: Oznámi stav skenovania knižnice.</li>
<li>S: Oznámi naplánovaný čas spustenia skladby.</li>
<li>Shift+S: Oznámi čas do spustenia (začína o).</li>
<li>T: zapína a vypína editáciu jinglov.</li>
<li>U: Oznámi čas od spustenia aplikácie Studio.</li>
<li>W: Oznámi Predpoveď počasia.</li>
<li>Y: Oznámi stav úpravy playlistu.</li>
<li>F8: Zobrazí štatistiku playlistu (počet skladieb, trvanie playlistu,
najkratšia a najdlhšia skladba).</li>
<li>Shift+F8: Uloží prepis playlistu vo viacerých formátoch.</li>
<li>F9: Označí skladbu ako počiatočnú pre analýzu (v zobrazení skladieb).</li>
<li>F10: Analyzuje skladby (zo zobrazenia skladieb).</li>
<li>F12: Prepína medzi konfiguračnými profilmi.</li>
<li>F1: Oznámi funkcie a klávesové skratky.</li>
</ul>
<h2>príkazy na ovládanie SPL</h2>
<p>je to množina príkazov, pomocou ktorej môžete SPL ovládať aj ak nemáte
zamerané okno SPL Studio. NVDA Povie "ovládanie". NVDA počká na ďalší
príkaz, ktorým môžete sledovať stav mikrofónu, alebo prehrávanie
nasledujúcej skladby.</p>
<p>Important: SPL Controller layer commands are disabled if NVDA is running in
secure mode.</p>
<p>The available SPL Controller commands are (some commands support speak on
demand):</p>
<ul>
<li>P: Play the next selected track.</li>
<li>U: Pause or unpause playback.</li>
<li>S: Stop the track with fade out.</li>
<li>T: Instant stop.</li>
<li>M: Turn on microphone.</li>
<li>Shift+M: Turn off microphone.</li>
<li>A: Turn on automation.</li>
<li>Shift+A: Turn off automation.</li>
<li>L: Turn on line-in input.</li>
<li>Shift+L: Turn off line-in input.</li>
<li>R: Remaining time for the currently playing track.</li>
<li>Shift+R: Library scan progress.</li>
<li>C: Title and duration of the currently playing track (supports speak on
demand).</li>
<li>Shift+C: Title and duration of the upcoming track if any (supports speak
on demand).</li>
<li>E: Encoder connection status (supports speak on demand).</li>
<li>I: Listener count (supports speak on demand).</li>
<li>Q: Studio status information such as whether a track is playing,
microphone is on and others (supports speak on demand).</li>
<li>Cart keys (F1, Control+1, for example): Play assigned carts from anywhere.</li>
<li>H: Layer help.</li>
</ul>
<h2>Upozornenia na zapnutý mikrofón, intro a koniec skladby</h2>
<p>Predvolene NVDA zapípa 5 sekúnd pred koncom skladby alebo pred koncom intra
skladby a tiež upozorňuje, keď je zapnutý mikrofón. Toto nastavenie je možné
zapnúť, vypnúť a upraviť hodnoty po stlačení alt+nvda+1. Je možné nastaviť
upozornenie pípaním, rečou alebo oboje.</p>
<h2>Vyhľadávač skladieb</h2>
<p>Ak chcete rýchlo nájsť skladbu podľa názvu interpreta alebo názvu skladby,
stlačte ctrl+nvda+f. Zadajte názov skladby alebo interpreta. NVDA vás
presunie na skladbu, ak sa našla, alebo zobrazí chybu, ak sa skladbu
nepodarilo nájsť. Ak chcete zopakovať to isté hľadanie smerom dopredu,
stlačte nvda+F3. Vyhľadávanie opačným smerom spustíte skratkou
nvda+shift+F3.</p>
<p>Pozor: Hľadanie rozlišuje veľké a malé písmená.</p>
<h2>Prehliadač jinglov</h2>
<p>Studio umožňuje uložiť a zaradiť až 96 jinglov, v závislosti od edície,
ktorú používate. Pomocou NVDA môžete zistiť pozície jinglov v prehliadači.</p>
<p>Aby ste zistili pozíciu jingla, v okne studio stlačte alt+NVDA+3. Ak príkaz
stlačíte raz, dozviete sa, ktorý efekt je priradený konkrétnej skratke. Po
dvojitom stlačení sa zvuk prehrá. Prehliadač opustíte opäť skratkou
alt+nvda+3. Podrobnosti nájdete v návode k tomuto doplnku.</p>
<h2>Analyzovanie času</h2>
<p>Ak chcete analyzovať čas vybratých skladieb, postupujte nasledovne: Nájdite
požadovanú počiatočnú skladbu. Potom stlačte skratku na spl zložený príkaz
nasledovanú klávesom F9. Potom nájdite koncovú skladbu, opätovne stlačte
skratku na spl zložený príkaz nasledovaný klávesom F10.</p>
<h2>Prehliadač metadát</h2>
<p>Skratkami Ctrl+NVDA+1 až 0, môžete čítať metadáta k skladbe. Predvolene je
to v okne studio: interpret, názov, dĺžka, intro, outro, kategória, rok,
album, žáner a nálada. V editoroch playlistu Creator a Remote VT závisí
poradie podľa toho, ako je nastavené usporiadanie na obrazovke. Zobrazené
metadáta sa dajú nastavovať v prehliadači metadát v nastaveniach
doplnku. Tieto nastavenia sa zohľadňujú len pre Studio a Tracktool.</p>
<h2>Track column announcement</h2>
<p>You can ask NVDA to announce track columns found in Studio's playlist viewer
in the order it appears on screen or using a custom order and/or exclude
certain columns. Press NVDA+V to toggle this behavior while focused on a
track in Studio's playlist viewer. To customize column inclusion and order,
from column announcement settings panel in add-on settings, uncheck
"Announce columns in the order shown on screen" and then customize included
columns and/or column order.</p>
<h2>Štatistika playlistu</h2>
<p>Zloženým príkazom SPL F8 si môžete z okna studio zo zoznamu skladieb
zobraziť štatistiku playlistu. Tu zistíte počet skladieb, najdlhšiu skladbu,
najhranejšieho interpreta a podobne. Ak si priradíte k tejto funkcii vlastnú
skratku, môžete po jej dvojitom stlačení zobraziť informáciu v režime
prehliadania. Okno so štatistikou zatvoríte klávesom ESC.</p>
<h2>Prepisy playlistu</h2>
<p>Zložený príkaz SPL shift+F8 umožní uložiť playlist ako prepis v čistom texte
alebo ako tabuľku HTML.</p>
<h2>Nastavenia doplnku</h2>
<p>From studio window, you can press Alt+NVDA+0 to open the add-on
configuration dialog. Alternatively, go to NVDA's preferences menu and
select SPL Studio Settings item. Not all settings are available if NVDA is
running in secure mode.</p>
<h2>Profily</h2>
<p>Pre rôzne relácie si môžete vytvoriť rôzne profily. Nastavenia vyvoláte
skratkou alt+nvda+p.</p>
<h2>Dotykový režim</h2>
<p>If you are using Studio on a touchscreen computer with NVDA installed, you
can perform some Studio commands from the touchscreen. First use three
finger tap to switch to SPL mode, then use the touch commands listed above
to perform commands.</p>
<h2>Version 24.03</h2>
<ul>
<li>Compatible with NVDA 2024.1.</li>
<li>NVDA 2023.3.3 or later is required.</li>
<li>Support for StationPlaylist suite 6.10.</li>
<li>Most commands support speak on demand (NVDA 2024.1) so announcements can
be spoken in this mode.</li>
</ul>
<h2>Version 24.01</h2>
<ul>
<li>The commands for the Encoder Settings dialog for use with the SPL and SAM
Encoders are now assignable, meaning that you can change them from their
defaults under the StationPlaylist category in NVDA Menu > Preferences >
Input Gestures. The ones that are not assignable are the connect and
disconnect commands. Also, to prevent command conflicts and make much
easier use of this command on remote servers, the default gesture for
switching to Studio after connecting is now Control+Shift+F11 (previously
just F11). All of these can of course still be toggled from the Encoder
Settings dialog (NVDA+Alt+0 or F12).</li>
</ul>
<h2>Version 23.05</h2>
<ul>
<li>To reflect the maintainer change, the manifest has been updated to
indicate as such.</li>
</ul>
<h2>Version 23.02</h2>
<ul>
<li>NVDA 2022.4 or later is required.</li>
<li>Windows 10 21H2 (November 2021 Update/build 19044) or later is required.</li>
<li>In Studio's playlist viewer, NVDA will not announce column headers such as
artist and title if table headers setting is set to either "rows and
columns" or "columns" in NVDA's document formatting settings panel.</li>
</ul>
<h2>Staršie verzie</h2>
<p>Please see the <a href="https://github.com/ChrisDuffley/stationplaylist/wiki/splchangelog">changelog</a> for release notes for old add-on releases.</p>
Hracia skrynkahttp://addons.nvda-project.org/addons/toneMaster.sk.html2024-02-13T14:37:33Z2016-07-17T23:17:46Z
<ul>
<li>Authors: Hrvoje Katić</li>
<li>Stiahnuť <a href="https://addons.nvda-project.org/files/get.php?file=tmast">stabilnú verziu</a></li>
<li>NVDA compatibility: 2019.3 and later</li>
</ul>
<p>Vitajte! Tento doplnok pre NVDA som vytvoril ako kratochvíľu a verím, že
budete mať s ním veľa zábavy.</p>
<p>NVDA dokáže pípať pri chybách a indikátore priebehu. Prečo by nemohlo zahrať
Mozzarta, Beethovena, prípadne niečo od Rollingstones? Také čosi nie je
úplne ľahké, a preto som vytvoril tento doplnok. Výsledok znie ako
niekdajšie zvonenia, ale stále je to zábavné.</p>
<p>Doplnok hracia skrynka uľahčuje vytváranie a následné prehrávanie súborov s
melódiami. Súbory môžete vytvoriť a uložiť v textovom editore.</p>
<h2>Súbory s melódiou</h2>
<p>Najprv musíte vytvoriť súbor, do ktorého zapíšete melódiu. Súbor musí mať
príponu .tdf.</p>
<ol>
<li>Na každom riadku <em>musia</em> byť tri parametre oddelené dvojbodkou (:). Prvý
parameter je výška tónu, druhý dĺžka tónu a tretí je dĺžka ticha, ktoré
bude nasledovať za tónom.</li>
<li>Výšku a dĺžku tónu určujete v celých číslach, dĺžku ticha je možné určiť
ako reálne číslo a môžete použiť aj desatinné miesta. (Poznámka
prekladateľa: Autor doplnku neuvádza, v akých jednotkách času sa uvádzajú
dĺžky, predpokladám, že pôjde o milisekundy. Výšku tónu zapisujeme v
hertzoch).</li>
<li>Komentár do súboru s melódiou môžete napísať na samostatný riadok, ktorý
začnete znakom krížik (#).</li>
</ol>
<p>Takto napríklad zahráme sekvenciu troch tónov:</p>
<p>1500:100:0.5</p>
<p>1000:100:0.09</p>
<p>500:100:0.7</p>
<p>Prvý tón má výšku 1500 hertzov, dĺžku 100 a nasleduje ticho v trvaní
0.5. Druhý má výšku 1000, trvanie 100, s ticho je 0.09. Tretí tón má výšku
500, trvanie 100, a ticho 0.7.</p>
<p>Vždy musíte špecifikovať aj parameter ticho a to aj v prípade, že žiadne
ticho nechcete vložiť. Inak bude NVDA tóny ignorovať.</p>
<p>Aby ste lepšie pochopili fungovanie súborov s melódiou, pozrite si ukážkovú
melódiu, ktorú nájdete v priečinku "tones" v priečinku doplnku. Do tohto
adresára tiež musíte uložiť aj vaše súbory s melódiami.</p>
<h2>Klávesové skratky</h2>
<ul>
<li>Alt+nvda+T: Prehrá súbor s melódiou.</li>
<li>Alt+Shift+NVDA+T: Zastaví prehrávanie.</li>
<li>Alt+NVDA+N: Otvorí poznámkový blok s a umožní vytvoriť nový súbor s
meódiou.</li>
<li>Alt+NVDA+L: Otvorí zoznam melódií, z ktorého môžete vybrať súbor na
prehratie.</li>
<li>Alt+NVDA+E: Otvorí v poznámkovom bloku súbor s melódiou, ktorý ste
načítali zo zoznamu melódií.</li>
<li>Alt+NVDA+O: Otvorí priečinok, v ktorom musia byť uložené melódie.</li>
</ul>
<h2>Poznámky</h2>
<p>Priečinok s melódiami je možné otvoriť z menu NVDA > nástroje > Hracia
skrynka.</p>
<p>Keď vytvárate nový súbor s melódiou cez skratku nvda+alt+n, názov zadávajte
bez prípony. Ak nevložíte názov, doplnok priradí názov "bez
názvu". Vytvorenie nového súboru môžete zrušiť klávesom escape.</p>
<p>Na vytváranie a úpravu používa doplnok poznámkový blok, keďže Notepad je
súčasťou operačného systému a predpokladá sa, že bude k dispozícii.</p>
<p>V dialógu na načítanie melódie vyberte šípkami požadovanú melódiu a otvorte
ju klávesom enter.</p>
<p>Súbory s príponou .tdf môžete priamo otvoriť a upravovať z priečinka
"tones". Ak chcete upravovať melódiu a súčasne počuť výsledok, najprv
melódiu načítajte cez skratku nvda+alt+l. Po uložení budete môcť rovno
opakovane prehrávať výsledok.</p>
<h2>Verzia 1.3</h2>
<ul>
<li>Upravené pre nové verzie NVDA.</li>
</ul>
<h2>Verzia 1.2</h2>
<ul>
<li>Opravená chyba, ktorá nastala ak ste sa pokúsili prehrať prázdny súbor a
potom už nefungovalo ani prehrávanie ostatných súborov.</li>
</ul>
<h2>Verzia 1.1</h2>
<ul>
<li>Pridaná možnosť vytvorenia súboru.</li>
<li>Pridaná možnosť otvoriť súbor s melódiou z ponuky doplnku.</li>
<li>Upravené chybové hlásenia.</li>
<li>Na zabezpečených obrazovkách viac nie je možné upravovať a vytvárať súbory
s melódiou.</li>
<li>NVDA upozorní na skončenie prehrávania.</li>
<li>Zakázané prehrávanie viacerých súborov súčasne.</li>
</ul>
<h2>Verzia 1.0</h2>
<ul>
<li>Prvé vydanie.</li>
</ul>
mp3DirectCuthttp://addons.nvda-project.org/addons/mp3DirectCut.sk.html2024-03-27T20:45:25Z2016-07-15T19:59:20Z
<ul>
<li>Author(s) : Abdel, Rémy, Abdellah zineddine, Jean-François COLAS.</li>
</ul>
<h1>Popis</h1>
<p>Doplnok upravuje prístupnosť aplikácie mp3DirectCut s NVDA.</p>
<p>Je testovaný s mp3DirectCut od verzie 212 do 223.</p>
<h2>Klávesové skratky</h2>
<p>Dostupné sú tieto klávesové skratky:</p>
<ul>
<li><p>B</p>
<ul>
<li>Umiestni počiatočnú značku.</li>
</ul>
</li>
<li><p>Ctrl+Shift+B</p>
<ul>
<li>Oznámi pozíciu počiatočnej značky.</li>
<li>Stlačené dvakrát rýchlo za sebou oznámi celkový čas označeného úseku.</li>
</ul>
</li>
<li><p>Ctrl+Shift+D</p>
<ul>
<li>Oznámi čas od začiatku súboru po kurzor.</li>
<li>Stlačené dvakrát rýchlo za sebou oznámi celkové trvanie súboru.</li>
</ul>
</li>
<li><p>Ctrl+R</p>
<ul>
<li>Zruší výber.</li>
</ul>
</li>
<li><p>Ctrl+Shift+R</p>
<ul>
<li>Oznámi zostávajúci čas od kurzora do konca súboru.</li>
</ul>
</li>
<li><p>Ctrl+Shift+E</p>
<ul>
<li>Oznámi pozíciu koncovej značky.</li>
<li>Stlačené dvakrát rýchlo za sebou oznámi pozíciu počiatočnej, koncovej
značky a celkový čas vybratého úseku.</li>
</ul>
</li>
<li><p>Ctrl+Shift+P</p>
<ul>
<li>Oznámi číslo časti a počet častí v aktuálnom súbore.</li>
</ul>
</li>
<li><p>Ctrl+Shift+medzera</p>
<ul>
<li>Prečíta maximálnu nameranú úroveň hlasitosti počas nahrávania.</li>
<li>Stlačené dvakrát rýchlo za sebou vynuluje meranie.</li>
</ul>
</li>
<li><p>šípka dole</p>
<ul>
<li>Oznámi pozíciu prehrávacieho kurzora.</li>
<li>Takisto presunie kurzor na koncovú značku a oznámi pozíciu, ak bolo
niečo vybraté.</li>
<li>V dialógu s nastavením hlasitosti povie nasledujúcu hodnotu.</li>
<li>Predvolene táto hodnota nie je oznamovaná.</li>
</ul>
</li>
<li><p>End</p>
<ul>
<li>Presunie kurzor na koniec súboru a oznámi celkové trvanie nahrávky.</li>
</ul>
</li>
<li><p>Home</p>
<ul>
<li>Presunie kurzor na začiatok súboru.</li>
</ul>
</li>
<li><p>ľavá šípka</p>
<ul>
<li>vráti sa o sekundu späť a oznámi pozíciu kurzora.</li>
<li>Oznamovanie sa dá vypnúť a zapnúť v nastaveniach doplnku.</li>
</ul>
</li>
<li><p>N</p>
<ul>
<li>Umiestni koncovú značku.</li>
</ul>
</li>
<li><p>Page Down</p>
<ul>
<li>Prejde o 10 sekúnd dopredu a oznámi pozíciu kurzora.</li>
<li>Oznamovanie sa dá vypnúť a zapnúť v nastaveniach doplnku.</li>
</ul>
</li>
<li><p>Page Up</p>
<ul>
<li>Vráti sa o 10 sekúnd a oznámi pozíciu kurzora.</li>
<li>Oznamovanie sa dá vypnúť a zapnúť v nastaveniach doplnku.</li>
</ul>
</li>
<li><p>R</p>
<ul>
<li>Prepne do režimu nahrávania, kde je možné samotné nahrávanie spustiť
medzerou.</li>
</ul>
</li>
<li><p>šípka doprava</p>
<ul>
<li>Presunie kurzor o sekundu dopredu a oznámi pozíciu kurzora.</li>
<li>Oznamovanie sa dá vypnúť a zapnúť v nastaveniach doplnku.</li>
</ul>
</li>
<li><p>Ctrl+pravá šípka</p>
<ul>
<li>Prejde na rozdelenie a oznámi čas.</li>
</ul>
</li>
<li><p>Ctrl+ľavá šípka</p>
<ul>
<li>Prejde na predchádzajúce rozdelenie a oznámi pozíciu kurzora.</li>
</ul>
</li>
<li><p>Shift+pravá šípka</p>
<ul>
<li>Preskočí o 4 stotiny sekundy dopredu a oznámi pozíciu kurzora.</li>
</ul>
</li>
<li><p>Shift+ľavá šípka</p>
<ul>
<li>Prejde o 4 stotiny sekundy dozadu a oznámi pozíciu kurzora.</li>
</ul>
</li>
<li><p>S</p>
<ul>
<li>Zastaví prehrávanie a povie pozíciu kurzora.</li>
</ul>
</li>
<li><p>Medzera</p>
<ul>
<li>V režime nahrávania spustí nahrávanie.</li>
<li>Ak je už nahrávanie spustené, zastaví ho a presunie kurzor na začiatok
nahrávky.</li>
<li>Ak je načítaný súbor, spustí prehrávanie.</li>
<li>Ak je spustené prehrávanie, pozastaví ho a povie aktuálnu pozíciu
kurzora.</li>
<li>Ak je prehrávanie pozastavené, spustí prehrávanie od pozície kurzora.</li>
</ul>
</li>
<li><p>Šípka hore</p>
<ul>
<li>Oznámi pozíciu prehrávacieho kurzora.</li>
<li>Presunie kurzor na počiatočnú značku a povie jej pozíciu.</li>
<li>V dialógu s nastavením hlasitosti prečíta predchádzajúcu dostupnú
hodnotu.</li>
<li>Predvolene táto hodnota nie je oznamovaná.</li>
</ul>
</li>
<li><p>NVDA+H</p>
<ul>
<li>Otvorí pomocníka pre doplnok.</li>
</ul>
</li>
</ul>
<h2>Kompatibilita</h2>
<ul>
<li>This add-on is compatible with the versions of NVDA ranging from 2019.3
and beyond.</li>
</ul>
<h2>Changes for 20240327.0.0</h2>
<ul>
<li>Fixed a bug that caused a log error when reloading plugins, thanks to Rob,
from nvda-addons mailing list;</li>
</ul>
<h2>Changes for 20240326.0.0</h2>
<ul>
<li>Updated compatibility for nvda-2024.1.;</li>
<li>Deleted download link from readme, the download link for future updates
will now only be available from the add-on store.</li>
</ul>
<h2>Changes for 20231229.0.0</h2>
<ul>
<li>Added a backward compatible implementation to support speak on demand
mode, which will soon be available with nvda-2024.1.</li>
</ul>
<h2>Changes for 20231007.0.0</h2>
<ul>
<li>After placing the cutting points and after opening the cutting properties
window, with "Ctrl+N", adding accessibility to the title of this window by
indicating the part index.</li>
<li>In reading mode, after moving the start or end markers of selections with
keys 1 to 6 of the alphanumeric pad, addition of automatic start of
reading from the new position;</li>
<li>Fixed a bug that occurred when consulting the remaining time with
"control+shift+r" from the beginning of the track.</li>
</ul>
<h2>Changes for 20230728.0.0</h2>
<ul>
<li>Applied the flake8 and mypy rules to the code;</li>
<li>Changed the minimum supported NVDA version to 2019.3 to support
annotations introduced in Python 3.</li>
</ul>
<h2>Changes for 20230508.0.0 and beyond</h2>
<ul>
<li>Changed version number, minimum NVDA version and download link according
to store conventions/requirements.</li>
</ul>
<h2>Change for version 20.12</h2>
<ul>
<li>Stop speech during recording and reading for the latest versions of
mp3directcut;</li>
<li>Fixed reading remaining time for new versions of NVDA using Python 3.</li>
</ul>
<h2>Verzia 19.2</h2>
<ul>
<li>Nastavenie doplnku presunuté do stromu s nastaveniami NVDA;</li>
<li>Verzie sú číslované v tvare yy.mm (dve číslice pre rok, dve číslice pre
mesiac);</li>
<li>Pridaná podpora pre nové čísla verzii uvedené v NVDA 2č019.1.</li>
</ul>
<h2>Verzia 4.0</h2>
<ul>
<li>Pridaná kompatibilita s prostredím Python 2.7 a 3;</li>
<li>Opravené problémy, ktoré nastávali, ak boli v názvoch ciest znaky mimo
ASCII rozsahu.</li>
</ul>
<h2>Verzia 3.0</h2>
<ul>
<li>Používame nový modul gui.guiHelper na správne zobrazenie dialógu s
nastavením;</li>
<li>V prekladoch sa namiesto %s používa presnejšie pomenovanie premenných.</li>
<li>Upravené podľa zásad a pravidiel doplnkov.</li>
</ul>
<h2>Verzia 2.3</h2>
<ul>
<li>Pridaná GPL licencia;</li>
<li>Skratka na zistenie koncovej značky zmenená z ctrl+shift+n na ctrl+shift+e
lebo ctrl+shift+n nefunguje v posledných verziách mp3DirectCut;</li>
<li>Pridaná skratka ctrl+r, ktorá oznámi zrušenie výberu;</li>
<li>Drobné úpravy v aplikačnom module.</li>
</ul>
<h2>Verzia 2.2</h2>
<ul>
<li>Opravené funkcie na zistenie pozície počiatočnej a koncovej značky.</li>
</ul>
<h2>Verzia 2.1.1</h2>
<ul>
<li>Odstránená funkcia na oznámenie celkového času. Celkový čas teraz oznamuje
funkcia na oznámenie uplynutého času.</li>
<li>Pridaná možnosť výrečnosti pri stlačení medzerníka;</li>
<li>Pridaná možnosť vypnúť a zapnúť oznamovanie umiestnenia značiek;</li>
<li>Pridaná možnosť zapnúť a vypnúť oznamovanie čísla časti pri prechode cez
rozdelenie;</li>
<li>Opravené oznamovanie pri použití šípky hore a dole;</li>
<li>Pridaný pomocník doplnku pod skratku nvda+h.</li>
<li>Nastavenie doplnku presunuté z menu nástroje do menu nastavenia.</li>
</ul>
<h2>Verzia 2.1</h2>
<ul>
<li>Pridané oznamovanie pri prechode na rozdelenie skratkou ctrl+pravá šípka;</li>
<li>Pridané oznamovanie pri prechode na rozdelenie skratkou ctrl+ľavá šípka;</li>
<li>Pridané oznamovanie pri pohybe skratkou shift+pravá šípka;</li>
<li>Pridané oznamovanie pri pohybe skratkou shift+ľavá šípka;</li>
<li>Opravený preklep v informácii o doplnku.</li>
</ul>
<h2>Verzia 2.0</h2>
<ul>
<li>Skratka ctrl+shift+r oznamuje zostávajúci čas;</li>
<li>Opravené čítanie času, teraz číta aj hodiny;</li>
<li>Rozlišuje stotiny a tisíciny sekundy;</li>
</ul>
<h2>Verzia 1.1</h2>
<ul>
<li><p>Pridaná kategória mp3DirectCut do dialógu klávesové skratky;</p>
<ul>
<li>Zobrazí sa, len ak dialóg otvoríte z okna mp3DirectCut.</li>
</ul>
</li>
<li><p>Pridaná možnosť nastaviť výrečnosť;</p></li>
</ul>
<h2>Verzia 1.0</h2>
<ul>
<li>Prvé vydanie.</li>
</ul>
Crash Herohttp://addons.nvda-project.org/addons/crashHero.sk.html2023-10-31T02:07:42Z2016-07-08T06:20:30Z
<ul>
<li>Author: Derek Riemer</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=crashHero-beta">beta version</a></li>
</ul>
<p>Note: This add-on is primarily useful for developers, or people running test
versions of NVDA. Use this add-on to let NVDA prompt you for more
information after a crash. For more information, visit <a href="https://derekriemer.com/node/44">the Crash Hero
add-on blog post</a>.</p>
Typ na deňhttp://addons.nvda-project.org/addons/tipOfTheDay.sk.html2023-05-10T20:38:33Z2016-06-05T03:01:17Z
<ul>
<li>Autor: Derek Riemer.</li>
<li>Stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=tod">stabilnú verziu</a></li>
<li>Stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=tod-dev">vývojovú verziu</a></li>
</ul>
<p>Tento doplnok vás postupne učí pracovať s NVDA tak, že vám každý deň
prezradí nejakú funkciu NVDA.</p>
<h2>Inštrukcie:</h2>
<p>Po inštalácii doplnku a prvom reštarte NVDA sa zobrazí otázka, na akej
úrovni ste v používaní počítača. Môžete vybrať napríklad možnosť
začiatočník.</p>
<p>NVDA následne zobrazí okno s tipom. Medzi tipmi sa prepínajte stlačením
tlačidiel predchádzajúce a nasledujúce. Okno môžete zatvoriť klávesom ESC
alebo tlačidlom zatvoriť. Na navigáciu v okne použite tab alebo
shift+tab. Tlačidlá aktivujete klávesom enter alebo medzerníkom. Tp si
môžete kedykoľvek zobraziť z menu NVDA.</p>
<p>Ak chcete zmeniť vašu úroveň v používaní počítača, aktivujte položku Tip na
deň v nastaveniach NVDA. NVDA sa pýta na vašu úroveň znalostí po inštalácii
doplnku a následnom reštarte NVDA.</p>
Pokročilý kurzor myšihttp://addons.nvda-project.org/addons/goldenCursor.sk.html2023-05-10T20:38:33Z2016-01-16T19:07:07Z
<ul>
<li>Autori: salah atair, Joseph Lee</li>
<li>Stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=goldenCursor">stabilnú verziu</a></li>
<li>NVDA compatibility: 2022.4 and beyond</li>
</ul>
<p>Umožňuje pohybovať kurzorom myši z klávesnice a uložiť pozície myši pre
klikanie v aplikáciách.</p>
<h2>Klávesové skratky</h2>
<ul>
<li>Control+NVDA+L: view saved mouse positions for an application, if any. You
can also assign gestures to these positions from this dialog. When
pressing the assigned gesture, a left click will be performed in the saved
position.</li>
<li>Nvda+shift+L: Zapamätaj si pozíciu myši pre otvorenú aplikáciu.</li>
<li>nvda+windows+c: Zmeň jednotku pohybu kurzora myši.</li>
<li>Nvda+windows+R: Zapni alebo vypni obmedzenie pohybu kurzora myši na
aktuálne okno.</li>
<li>Nvda+windows+S: zapni alebo vypni oznamovanie pozície kurzora myši v
pixeloch.</li>
<li>NVDA+windows+j: Presuň kurzor myši na zadané súradnice.</li>
<li>NVDA+windows+P: Oznám súradnice kurzora myši.</li>
<li>NVDA+windows+m: Zapni alebo vypni pohybovanie kurzorom myši pomocou
kurzorových kláves (šípky hore, dole, doľava a doprava).</li>
<li>Windows+nvda+šípky: Presuň kurzor myšy (ak je aktivované pohybovanie
kurzorom myši pomocou kurzorových kláves, stačí použiť len šípky).</li>
</ul>
<p>Klávesové skratky môžete zmeniť v dialógu klávesové skratky.</p>
<h2>Poznámky</h2>
<ul>
<li>Ak posielate uložené pozície kurzora myši na použitie niekomu ďalšiemu,
obaja musíte používať rovnaké rozlíšenie obrazovky.</li>
<li>Takisto odporúčame vždy maximalizovať aktuálne okno skratkou Windows+šípka
hore.</li>
<li>Ak zdieľate pozície, odporúčame vám skontrolovať ich názvy a prípadne ich
premenovať.</li>
<li>Uložené pozície z verzie doplnku 1.X nie sú kompatibilné s novými verziami
doplnku.</li>
<li>Ak chcete používať šípky na štandardné príkazy, najprv vypnite ovládanie
myši pomocou kurzorových kláves.</li>
<li>Ak vymažete poslednú zapamätanú pozíciu pre aktuálnu aplikáciu, zmaže sa
celý súbor s dátami pre aktuálnu aplikáciu.</li>
</ul>
<h2>Version 6.2</h2>
<ul>
<li>Requires NVDA 2022.4 or later.</li>
<li>Compatible with NVDA 2023.1.</li>
</ul>
<h2>Version 6.1</h2>
<ul>
<li>Requires NVDA 2021.3 or later.</li>
<li>Now, you can assign shortcuts for saved positions from the positions
list. When pressing a shortcut, a left click will be performed for the
position.</li>
</ul>
<h2>Version 5.0</h2>
<ul>
<li>Modernized add-on source code to make it compatible with NVDA 2021.1.</li>
<li>Resolved many coding style issues and potential bugs with Flake8.</li>
</ul>
<h2>Verzia 4.0</h2>
<ul>
<li>Vyžaduje NVDA od verzie 2019.3.</li>
<li>Panel nastavení zmenený na dialóg.</li>
</ul>
<h2>Verzia 3.3</h2>
<ul>
<li>Kód upravený pre podporu budúcich vydaní NVDA..</li>
</ul>
<h2>Verzia 3.2</h2>
<ul>
<li>Upravené pre NVDA 2018.3 (wxPython 4).</li>
</ul>
<h2>Verzia 3.0</h2>
<ul>
<li>Dialóg s nastaveniami bol presunutý do stromu nastavení pre NVDA od verzie
2018.2.</li>
</ul>
<h2>Verzia 2.1</h2>
<ul>
<li>Opravená chyba unicode decode error pri mazaní uložených pozícií.</li>
<li>Odteraz nie je možné mať otvorených viacero okien doplnku súčasne.</li>
<li>Opravená odozva dialógov a okien.</li>
</ul>
<h2>Verzia 2.0</h2>
<ul>
<li>Vyžaduje NVDA od verzie 2017.3.</li>
<li>Zmenil sa formát uložených súradníc. Staré súradnice sa prevedú do nového
formátu po inštalácii doplnku.</li>
<li>Pridaný dialóg s nastaveniami, kde je možné nastaviť oznamovanie pozície
kurzora myši a jednotku pohybu kurzora.</li>
<li>Upravené správy.</li>
<li>Pri prepínaní nastavení sa neprehráva zvuk.</li>
<li>Odteraz je možné pohybovať kurzorom len za použitia kurzorových kláves (po
zapnutí príslušného režimu).</li>
<li>Upravený dialóg na ukladanie. Odteraz obsahuje zapamätané súradnice a
názov aplikácie.</li>
<li>Kláves enter v zozname uložených súradníc automaticky presunie myš na
požadované miesto.</li>
<li>Pri premenovaní názvu NVDA skontroluje, či neexistuje uložená pozícia s
rovnakým menom a ak áno, zobrazí chybu.</li>
<li>Odstránenie súradníc je potrebné odteraz potvrdiť.</li>
<li>Zmenený dialóg na presun kurzora myšy. Zmenil sa názov okna a súradnice je
možné zadať alebo nastaviť šípkami.</li>
<li>Dialóg pri ukladaní obsahuje aktuálnu pozíciu kurzora myši.</li>
<li>When saving positions, resolved an issue where NVDA may play error tones
if the positions folder does not exist.</li>
</ul>
<h2>Verzia 1.4</h2>
<ul>
<li>Odstránená knižnica win32api, ktorá nie je podporovaná v novších verziách
NVDA.</li>
</ul>
<h2>Verzia 1.0</h2>
<ul>
<li>Prvé vydanie.</li>
</ul>
Deň v týždnihttp://addons.nvda-project.org/addons/dayOfTheWeek.sk.html2024-03-26T20:46:21Z2015-09-30T21:50:46Z
<ul>
<li>Autori: Abdel, Noelia.</li>
</ul>
<p>Doplnok umožňuje zistiť, ktorý deň pripadá na zadaný dátum.</p>
<p>V menu NVDA > nástroje pribudne ponuka Deň v týždni. V tejto ponuke sú
dostupné dve položky:</p>
<ul>
<li><p>Položka Hľadať deň otvorí dialóg, v ktorom sú tri prvky:</p>
<ul>
<li>Zoznam, v ktorom môžete vybrať alebo zadať dátum;</li>
<li>Tlačidlo OK na zobrazenie dňa;</li>
<li>Tlačidlo Zrušiť na zatvorenie dialógu.</li>
</ul>
</li>
<li><p>Druhá položka s názvom Nastavenia deň v týždni obsahuje tieto možnosti:</p>
<ul>
<li>Povoliť sprístupnenie prvku na výber dátumu;</li>
<li><p>Úroveň oznamovania prvkov, kde máte tri možnosti:</p>
<ul>
<li>Dlhé (predvolená možnosť);</li>
<li>Krátke;</li>
<li>Vypnuté (na vypnutie oznamovania popiskov).</li>
</ul>
</li>
<li><p>Počas nastavovania dátumu upozorniť na dnešný deň;</p></li>
<li>Tlačidlo OK na uloženie nastavení;</li>
<li>Tlačidlo zrušiť na zatvorenie dialógu.</li>
</ul>
</li>
</ul>
<h2>Poznámky</h2>
<ul>
<li>Dialógi je možné zatvoriť tlačidlom escape;</li>
<li>Skratky na vyvolanie dialógov doplnku je možné nastaviť v menu nvda >
možnosti > Klávesové skratky, vo vetve Deň v týždni.</li>
<li>Od verzie NVDA 2018.2 je v menu nástroje v podmenu doplnku len jedna
položka. Nastavenia sú v strome s nastaveniami NVDA.</li>
</ul>
<h2>Kompatibilita</h2>
<ul>
<li>This add-on is compatible with the versions of NVDA ranging from 2019.3
and beyond.</li>
</ul>
<h2>Changes for 20240326.0.0</h2>
<ul>
<li>Updated compatibility for nvda-2024.1.;</li>
<li>Deleted download link from readme, the download link for future updates
will now only be available from the add-on store.</li>
</ul>
<h2>Changes for 20231229.0.0</h2>
<ul>
<li>Added a backward compatible implementation to support speak on demand
mode, which will soon be available with nvda-2024.1.</li>
</ul>
<h2>Changes for 20231015.0.0</h2>
<ul>
<li>Fixed a bug detected when navigating with up arrow from the date picker in
the latest versions of NVDA.</li>
</ul>
<h2>Changes for 20230728.0.0</h2>
<ul>
<li>Applied the flake8 and mypy rules to the code;</li>
<li>Changed the minimum supported NVDA version to 2019.3 to support
annotations introduced in Python 3.</li>
</ul>
<h2>Changes for 20230508.0.0 and beyond</h2>
<ul>
<li>Changed version number, minimum NVDA version and download link according
to store conventions/requirements.</li>
</ul>
<h2>Verzia 19.02</h2>
<ul>
<li>Upravené číslovanie verzie. Používame tvar YY.MM (dve číslice pre rok a
dve pre mesiac);</li>
<li>Pridaná podpora pre nové zadávanie verzií doplnkov predstavené v NVDA
2019.1.</li>
</ul>
<h2>Verzia 6.0</h2>
<ul>
<li>Nastavenia pridané do stromu nastavení pre NVDA od verzie 2018.2;</li>
<li>Položka vyhľadať deň presunutá do menu nástroje;</li>
<li>Pridaná spätná kompatibilita so staršími verziami NVDA pred 2018.2;</li>
</ul>
<h2>Verzia 5.0</h2>
<ul>
<li>Pridaná kompatibilita s rozhraním wxPython 4.0 a Python3;</li>
<li>Opravené problémy, ktoré nastávali, ak sa doplnok pokúsil uložiť
nastavenia a cesta obsahovala znaky mimo ascii rozsahu.</li>
</ul>
<h2>Verzia 4.0</h2>
<ul>
<li>Doplnok rozpoznáva všetky regionálne dátumy;</li>
<li>Pridaná spätná kompatibilita s NVDA do verzie 2016.4, ktoré obsahovali
modul gui.guiHelper.</li>
</ul>
<h2>Verzia 3.1</h2>
<ul>
<li>Vraciame sa k predošlému formátu doplnku, ktorý podporoval viacero
jazykov;</li>
<li>Upravená prístupnosť prvku na výber dátumu, kde je možné vyrbať deň,
mesiac a rok;</li>
<li>Doplnok dokáže oznamovať dni v Gruzínčine;</li>
<li>Pridaná možnosť nastaviť prístupnosť prvku na výber dátumu;</li>
<li>Nastavenia doplnku presunuté z menu nástroje do menu možnosti;</li>
<li>Zmenená kategória v dialógu klávesové skratky.</li>
</ul>
<h2>Verzia 2.0</h2>
<ul>
<li>Upravený vzhľad dialógov použitím gui.guiHelper;</li>
<li>Pridaná GPL licencia;</li>
<li>Preloľžené dni, takže doplnok je možné používať vo viacerých jazykoch;</li>
<li>Odstránené problémy s kódovaním.</li>
</ul>
<h2>Verzia 1.0</h2>
<ul>
<li>Prvé vydanie.</li>
</ul>
VLC Media Playerhttp://addons.nvda-project.org/addons/vlc.sk.html2023-05-10T20:38:33Z2015-09-29T22:47:07Z
<ul>
<li>Autor: Javi Dominguez</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=vlc">stable version</a></li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=vlc-dev">development version</a></li>
</ul>
<p>Doplnok poskytuje vylepšenia prístupnosti pre VLC Media Player.</p>
<ol>
<li>Umožňuje presúvať sa medzi prvkami počas prehrávania skratkami tab a
shift+tab. Prvok aktivujte klávesom enter.</li>
<li>Písmeno I prečíta stavový riadok. (Skratku je možné nastaviť v dialógu
klávesové skratky).</li>
<li>Oznamuje uplynutý čas pri posúvaní počas prehrávania. Použiť môžete
štandardné skratky: ctrl+šípky doprava a doľava na skok po minútach,
alebo shift+šípky doľava a doprava na skok po 5 sekundách. Výrečnosť sa
dá nastaviť v nastaveniach NVDA v kategórii VLC. Výrečnosť je tiež možné
prepínať skratkou.</li>
<li>Oznamuje prepínanie režimu náhodného výberu (skratka R) a opakovania
(skratka L).</li>
<li><p>Niekedy NVDA nedokáže získať prístup k niektorým vloženým oknám a
panelom. V takom prípade použite skratku ctrl+tab, aby sa takéto okná
dostali do popredia.</p></li>
<li><p>Important note: This addon is optimized for versions of VLC 3.0 and
higher; it will not work correctly with earlier versions.</p></li>
<li>Poskytované pod všeobecnou licenciou GNU. Pozrite <a href="https://github.com/javidominguez/VLC/blob/master/COPYING.txt">Súbor COPYING.txt
(anglicky)</a>
for more details.</li>
</ol>
Vylepšenia prístupnosti pre Windowshttp://addons.nvda-project.org/addons/wintenApps.sk.html2024-03-23T20:29:02Z2015-09-19T17:16:47Z
<ul>
<li>Authors: Joseph Lee, Derek Riemer and others</li>
</ul>
<p>Note: Originally called Windows 10 App Essentials, it was renamed to Windows
App Essentials in 2021 to support Windows 10 and future releases such as
Windows 11. Parts of this add-on will still refer to the original add-on
name.</p>
<p>This add-on is a collection of app modules for various modern Windows apps,
as well as enhancements and fixes for certain controls found in Windows 10
and later.</p>
<p>Zahrnuté sú nasledujúce moduly (podrobný popis nájdete nižšie):</p>
<ul>
<li>Moderná klávesnica</li>
<li>Settings (Windows+I)</li>
</ul>
<p>Poznámky:</p>
<ul>
<li>This add-on requires 64-bit Windows 10 22H2 (build 19045), 11 22H2 (build
22621), or later releases.</li>
<li>Feature update support duration is tied to consumer support duration
(Home, Pro, Pro Education, Pro for Workstations editions) and the add-on
may end support for a feature update prior to end of consumer support. See
<a href="https://aka.ms/WindowsTargetVersioninfo">https://aka.ms/WindowsTargetVersioninfo</a> for more information and support
dates.</li>
<li>Although installation is possible, this add-on does not support Windows
Enterprise LTSC (Long-Term Servicing Channel) and Windows Server releases.</li>
<li>Not all features from Windows Insider Preview builds will be supported,
more so for features introduced to a subset of Windows Insiders in canary
and dev channels.</li>
<li>The add-on may emulate changes included in Insider Preview builds which
are subsequently removed, and for these changes, the add-on may remove
them in future releases.</li>
<li>Add-on dev channel will include changes including experimental content
that may or may not be included in beta and stable releases, and beta
channel will come with changes planned for future stable releases.</li>
<li>Niektoré doplnkové funkcie sú alebo časom budú súčasťou NVDA.</li>
<li>For best experience with apps that embed web technologies and content such
as Start menu and its context menu, enable "Automatic focus mode for focus
changes" setting from NVDA's browse mode settings panel.</li>
</ul>
<p>For a list of changes made between each add-on releases, refer to
<a href="https://github.com/josephsl/wintenapps/wiki/w10changelog">changelogs for add-on releases</a> document.</p>
<h2>Všeobecné</h2>
<ul>
<li>In Windows 11 24H2 Insider Preview builds, quick settings (shellhost.exe)
interface elements can be navigated using mouse and/or touch interaction.</li>
</ul>
<h2>Moderná klávesnica</h2>
<p>This includes emoji panel, clipboard history, touch keyboard,
dictation/voice typing, hardware input suggestions, suggested actions, and
modern input method editors for certain languages across Windows 10 and
11. When viewing emojis, for best experience, enable Unicode Consortium
setting from NVDA's speech settings and set symbol level to "some" or
higher. When pasting from clipboard history in Windows 10, press Space key
instead of Enter key to paste the selected item.</p>
<ul>
<li>In Windows 11, NVDA will announce suggested actions when compatible data
such as phone numbers is copied to the clipboard. This is now part of NVDA
2024.2.</li>
</ul>
<h2>Settings (Windows+I)</h2>
<ul>
<li>NVDA will report updates to Windows Update status as download and install
progresses. In Windows 10, this may result in speech interruption when
navigating Settings app while updates are being downloaded and
installed. In Windows 11, object navigation can be used in updates list to
review update status for individual entries.</li>
</ul>
NVDA Remote: vzdialená správahttp://addons.nvda-project.org/addons/nvdaremote.sk.html2023-05-10T20:38:33Z2015-07-03T22:28:26Z
<ul>
<li>Autori: Christopher Toth, Tyler Spivey</li>
</ul>
<p>Doplnok umožňuje ovládať počítače cez internet alebo v lokálnej
sieti. Podmienkou je, aby na oboch počítačoch bežalo NVDA a tento
doplnok. Podrobnosti si môžete prečítať a tiež zdarma získať doplnok na
<a href="https://nvdaremote.com/">Domovskej stránke doplnku (anglicky).</a></p>
TeamTalk Classichttp://addons.nvda-project.org/addons/teamtalk.sk.html2023-05-10T20:38:33Z2015-06-10T18:49:53Z
<ul>
<li>Autor: Doug Lee.</li>
<li>stiahnuť <a href="https://www.dlee.org/teamtalk/NVDA/TeamTalk%20Classic.nvda-addon">stabilnú verziu</a></li>
</ul>
<p>Vylepšuje prístupnosť aplikácie Teamtalk ss NVDA. Podrobnosti zistíte na
<a href="https://www.dlee.org/teamtalk/NVDA/">Domovskej stránke doplnku (anglicky)</a>.</p>
Rýchla navigácia v tabuľkáchhttp://addons.nvda-project.org/addons/easyTableNavigator.sk.html2024-02-13T14:36:34Z2015-04-06T01:20:45Z
<ul>
<li>Authors: Corentin Bacqué-Cazenave, Joseph Lee</li>
<li>Stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=etn">stabilnú verziu</a></li>
<li>Stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=etn-dev">vývojovú verziu</a></li>
<li>NVDA compatibility: 2019.3 and beyond</li>
</ul>
<p>This plugin adds a layer command to use simplified key combination to
navigate table cells. When the layered commands are enabled, you can
perform the following actions:</p>
<ul>
<li>Navigate to the previous or next cell horizontally or vertically using
arrow keys</li>
<li>Navigate to the first or last cell of the row or the column using
control+arrow keys or Home, End, PageUp and PageDown</li>
<li>Read the whole row or column without moving the system caret using
windows+leftArrow / windows+upArrow</li>
<li>Read the row or column starting from the current cell using
windows+rightArrow / windows+downArrow</li>
</ul>
<p>Podporované tabuľky</p>
<ul>
<li>Režim prehliadania (Internet explorer, Mozila firefox...)</li>
<li>Microsoft Word.</li>
</ul>
<h2>Skratky</h2>
<ul>
<li>Skratku pre zapínanie a vypínanie rýchlej navigácie po tabuľkách si musíte
nastaviť v menu NVDA > Klávesové skratky.</li>
</ul>
<h2>Changes for 2.4</h2>
<p>For this release, many thanks goes to Cyrille Bougot for his work.</p>
<ul>
<li>Table navigation fixed in MS Word</li>
<li><p>Introduce new commands following changes in NVDA 2022.2 and 2022.4</p>
<ul>
<li>home/end/pgUp/pgDown to jump to start/end of row/column</li>
<li>control+left/right/up/downArrow to jump to start/end of row/column
(alternative shortcut key for the same result)</li>
<li>NVDA+left/up to read the whole row/column starting from the first cell
without moving the current position of the cursor</li>
<li>NVDA+right/down for sayAll in row/column, i.e. read the cells of the
current row/column, starting from the current cell and moving the
cursor's position while reading until the last cell of the row/column.</li>
</ul>
</li>
<li><p>Remaped some keys to avoid conflicts:</p>
<ul>
<li>NVDA+upArrow/leftArrow becomes windows+upArrow/leftArrow (to read full
column/row)</li>
<li>NVDA+downArrow/rightArrow becomes windows+downArrow/rightArrow (say
all in column/row)</li>
</ul>
</li>
<li><p>Compatibility with NVDA 2023.1</p></li>
</ul>
<h2>Changes for 2.3</h2>
<ul>
<li>It is now possible to disable table navigation layer from everywhere</li>
<li>Compatibility with NVDA 2022.1</li>
<li>Fix error when reloading the addon</li>
</ul>
<h2>Changes for 2.2.1</h2>
<ul>
<li>Fixed an error in some type of documents including Word and Outlook</li>
</ul>
<h2>Changes for 2.2</h2>
<ul>
<li>Update documentation style from addons template</li>
<li>First translated version</li>
</ul>
<h2>Changes for 2.1.1</h2>
<ul>
<li>New author in manifest and documentation</li>
</ul>
<h2>Changes for 2.1</h2>
<ul>
<li>Compatibility with NVDA 2021.1</li>
</ul>
<h2>Verzia 2.0</h2>
<ul>
<li>Vyžaduje NVDA od verzie 2019.3.</li>
<li>Umožnený preklad doplnku do iných jazykov.</li>
</ul>
<h2>Verzia 1.2</h2>
<ul>
<li>Interné zmeny pre budúce verzie NVDA.</li>
</ul>
<h2>Verzia 1.1</h2>
<ul>
<li>Opravená chyba, ktorá nastávala pri zapnutej kontrole pravoopisu v
programe MS Outlook.</li>
</ul>
<h2>Verzia 1.0</h2>
<ul>
<li>prvé vydanie.</li>
</ul>
Rozšírené hodiny a kalendárhttp://addons.nvda-project.org/addons/clock.sk.html2024-02-13T14:37:41Z2015-03-27T20:43:09Z
<ul>
<li>Authors: Hrvoje Katić, Abdel and NVDA contributors</li>
<li><p>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=clock">stable version</a></p></li>
<li><p>NVDA compatibility: 2019.3 and later</p></li>
</ul>
<p>This add-on enables the advanced clock, alarm timer and calendar
functionality for NVDA.</p>
<p>You can configure NvDA to announce time and date in formats other than what
Windows provides by default. Additionally, you can obtain the current day,
week number, as well as the remaining days before the end of the current
year, and you can also set automatic time announcement on specified
interval. There's also a stopwatch and Alarm timer features built-in to the
add-on that lets you time your tasks, such as copying files, installing
programs, or cooking meals.</p>
<p>Notes:</p>
<ul>
<li>if you install the add-on as an update, during the installation process,
the wizard detects if the old configuration is compatible with the new one
and offers to correct it before installing, then you'll just have to
validate the OK button to confirm that.</li>
<li>On Windows 10 and later, you can use Alarms and Clock app to manage
stopwatch and timers.</li>
</ul>
<h2>Klávesové skratky</h2>
<ul>
<li>NVDA+F12: get current time</li>
<li>NVDA+F12 pressed twice quickly: get current date</li>
<li>NVDA+F12 pressed three times quickly: reports the current day, the week
number, the current year and the remaining days before the end of the year</li>
<li>NVDA+Shift+F12: enter clock layer</li>
</ul>
<h2>Unassigned commands</h2>
<p>The following commands are not assigned by default; if you wish to assign
them, use Input Gestures dialog to add custom commands. To do so, open NVDA
menu, Preferences, then Input Gestures. Expand Clock category, then locate
unassigned commands from the list below and select "Add", then enter the
gesture you wish to use.</p>
<ul>
<li>Elapsed and remaining time before the next alarm. pressing this gesture
twice quickly will cancel the next alarm.</li>
<li>Stop currently playing alarm sound.</li>
<li>Display schedule alarms dialog box.</li>
</ul>
<h2>Zložené Klávesové skratky</h2>
<p>Zložené príkazy pozostávajú zo skratky nvda+shift+F12 nasledovanej písmnom:</p>
<ul>
<li>S: Starts, resets or stops the stopwatch</li>
<li>R: Resets stopwatch to 0 without restarting it</li>
<li>A: gives the elapsed and remaining time before the next alarm</li>
<li>T: opens schedule alarms dialog.</li>
<li>C: Cancel the next alarm</li>
<li>Space: Speaks current stopwatch or count-down timer</li>
<li>p: If an alarm is too long, allows to stop it</li>
<li>H: List all layered commands (Help)</li>
</ul>
<h2>Configuration and usage</h2>
<p>To configure clock functionality, open NvDA menu, Preferences, then
Settings, and configure the following options from Clock panel:</p>
<ul>
<li>Time and date display format: use these combo boxes to configure how NVDA
will announce time and date when you press NVDA+F12 once or twice quickly,
respectively.</li>
<li>Interval: choose the time announcement interval from this combo box (off,
every 10 minutes, 15 minutes, 30 minutes, or every hour).</li>
<li>Time announcement (enabled if interval is not off): choose between speech
and sound, sound only, or speech only.</li>
<li>Clock chime sound (enabled if interval is not off): select the clock chime
sound.</li>
<li>Quiet hours (enabled if interval is not off): select this checkbox to
configure quiet hours range when automatic time announcement should not
occur.</li>
<li>Quiet hours time format (enabled if quiet hours is enabled): select how
quiet hours options are presented (12-hour or 24-hour format).</li>
<li>Quiet hours start and end times: select hour and minute range for quiet
hours from hours and minutes combo boxes.</li>
</ul>
<p>To schedule alarms, open NVDA menu, Tools, then select Schedule Alarms. The
dialog contents include:</p>
<ul>
<li>Alarm duration in: select alarm/timer duration between hours, minutes, and
seconds.</li>
<li>Duration: enter alarm duration in the unit specified above.</li>
<li>Alarm sound: select the alarm sound to be played.</li>
<li>Stop and pause buttons: stop or pause a long alarm sound.</li>
</ul>
<p>Click OK, and a message will inform you the curretnly selected alarm
duration.</p>
Newfonhttp://addons.nvda-project.org/addons/newfon.sk.html2024-02-13T14:37:13Z2015-02-25T03:21:40Z
<ul>
<li>Authors: Sergey Shishmintsev, Alexy Sadovoi, Sergey A.K.A. Electrik, Kvark
and other developers</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=newfon">stable version</a></li>
<li>NVDA Compatibility: 2019.2 to 2023.1</li>
</ul>
<h3>About</h3>
<p>Newfon is a speech synthesizer that supports Russian and Ukrainian for the
first time since its release. Later Croatian, Polish and Serbian were added.</p>
<h3>General features:</h3>
<ul>
<li>Ability to change languages;</li>
<li>Changing the sampling rate;</li>
<li>Sound interpolation to simulate the sound of old DOS screen readers and
book readers;</li>
<li>In order for the synthesizer to read the text as it is written, it is
possible to disable the built-in accent dictionary. Option works only for
Russian language;</li>
<li>The synthesizer, in addition to the main rate from 0 to 100%, supports
additional speech acceleration, which reduces the time of reading the
text;</li>
<li>To get a smoother reading at high speeds, it is possible to adjust the
pauses between phrases.</li>
</ul>
<h3>Note:</h3>
<p>Numerous versions of Newfon have been released since it was first published
on the NVDA official add-ons site, but unfortunately the lead developer
Sergey Shishmintsev died, which delayed the update of the synthesizer on the
site.</p>
<p>In 2017, the current developers of the Newfon speech synthesizer had the
opportunity to get the source codes for Sergey's developments. His
relatives, thanks to whom this happened, set them only one condition: if the
development of his projects continues, they must become free.</p>
<p>The developers, in turn, decided that history should not forget Sergey
Shishmintsev, as he was a unique programmer with an enormous amount of
perseverance, hard work and knowledge.</p>
<h2>Changelog</h2>
<h3>Version 2023.3</h3>
<p>The GPL license is back in place of MIT. Now MIT is used for open source
scripts and GPL is used for Newfon speech driver.</p>
<h3>Version 2023.2</h3>
<p>Newfon license changed from GPL to MIT license.</p>
<h3>Version 2023.1</h3>
<ul>
<li>Added compatibility with NVDA 2023.1 (backwards compatibility with NVDA
2019 is still supported);</li>
<li>Added Newfon license agreement in English;</li>
<li>Added documentation in Russian.</li>
</ul>
<h3>Version 2022.04.16</h3>
<p>Compatible with NVDA 2022 (Backward compatibility with NVDA 2019.2 is still
supported.).</p>
<h3>Version 2021.06.06</h3>
<p>For compatibility with later versions of NVDA, the lastTestedNVDAVersion
value has been changed.</p>
<h3>Version 2021.03.19</h3>
<p>For compatibility with subsequent versions of NVDA, the internal mechanisms
for the interaction of the synthesizer with NVDA drivers have been changed.</p>
<h3>Version 2021.01.16</h3>
<h4>Added:</h4>
<p>speech.BreakCommand - This feature is required by some add-ons to pause
speech for a while.</p>
<h4>Fixed:</h4>
<p>In Ukrainian, some capital letters were not read correctly.</p>
<h3>Version 2020.12.28</h3>
<p>In this version, a significant processing of scripts, restructuring of the
add-on, new languages (test opportunity) and much more was made.</p>
<h4>Added:</h4>
<ul>
<li>New languages: Croatian, Polish, Serbian. These scripts were taken from
open sources and provided by beta testers. The author cannot be
responsible for the operation of these scripts, so you use them as is -
without any guarantees;</li>
<li>Some old Russian characters have been added to the Russian language: "і":
"и десятеричное", "ѣ": "ять", "ѳ": "фита", "ѵ": "ижица", "ў": "у краткое",
"ґ": "гэ взрывное". Accordingly, if you read the old Russian word, it will
be read correctly;</li>
<li>Sound interpolation. Now you can imitate the sound of a newfon, just like
in the old DOS screen readers and book readers. To implement this feature,
the libsamplerate library is used;</li>
<li>Now you can turn off reading decimal fractions (only for Russian and
Ukrainian), which improves the reading of program versions.</li>
</ul>
<h4>Changed:</h4>
<ul>
<li>The add-on has been completely reworked. now all the code is not in one
<strong>init</strong>.py file, which makes maintaining the code and adding new
languages much easier;</li>
<li>Queues from DLLs have been ported to Python, which has a good effect on
the stability of the add-on.</li>
</ul>
<h4>Fixed:</h4>
<p>Sound out of sync bug that occasionally appeared on the latest versions of
NVDA.</p>
<h3>Version 2020.09.12</h3>
<h4>Changed:</h4>
<p>Due to a change in the way the audio subsystem works In new alpha versions
of NVDA, the sample rate was not switched properly.</p>
<h3>Version 2020.03.12</h3>
<h4>Added:</h4>
<ul>
<li>At the request of users, an optional ability has been added for English
pronunciation, instead of the sound е, pronounce the sound э - like in the
old add-ons;</li>
<li>Now the add-on has localization, accordingly, on the Ukrainian NVDA
interface, all additional parameters will be displayed in the
corresponding language.</li>
</ul>
<h4>Changed</h4>
<ul>
<li>Thanks to the programmer Kvark, the internal architecture of the add-on
was rewritten to the third Python;</li>
<li>For fans of non-standard voices, the list of sampling frequencies has been
expanded.</li>
</ul>
Dva hlasyhttp://addons.nvda-project.org/addons/dualvoice.sk.html2023-05-10T20:38:33Z2015-02-17T22:28:44Z
<ul>
<li>Autor: Mahmood Taghavi.</li>
<li>stiahnuť <a href="https://sourceforge.net/projects/dualvoice/files/latest/download">stabilnú verziu</a></li>
</ul>
<p>tento doplnok vám umožní používať dva hlasy na čítanie textu. Podrobnosti
nájdete v <a href="https://mahmood-taghavi.github.io/dual_voice/">návode (zatiaľ anglicky).</a></p>
Rozšírená schránkahttp://addons.nvda-project.org/addons/clipContentsDesigner.sk.html2024-03-10T17:40:19Z2014-12-13T09:43:18Z
<ul>
<li>Autori: Noelia, Abdel.</li>
</ul>
<p>Tento doplnok využijete, ak chcete do schránky Windows postupne vkladať
rôzne časti textu a výsledok naraz prilepiť. Doplnok vie tiež vyčistiť obsah
schránky a zobraziť obsah schránky v režime prehliadania.</p>
<h2>Klávesové skratky</h2>
<ul>
<li>NVDA+windows+c: pripojí k obsahu schránky vybratý text, alebo text, ktorý
ste označili prezeracím kurzorom. Takto je možné pridať aj znaky unicode,
MathML.</li>
<li>NVDA+windows+x: vymaže obsah schránky.</li>
<li>Nepridelené: Skopíruje alebo vystrihne obsah, pričom zobrazí varovanie.</li>
<li>Not assigned: Shows the clipboard text as HTML in browse mode, or
announces if clipboard is empty or has contents which can't be presented
in a browseable message, for instance if files or folders are been copied
from Windows Explorer.</li>
<li>Not assigned: Shows the textual clipboard contents as plain text in browse
mode, or announces if clipboard is empty or has contents which can't be
presented in a browseable message, for instance if files or folders are
been copied from Windows Explorer.</li>
</ul>
<h2>Clip Contents Designer settings</h2>
<p>This panel is available from NVDA's menu, Preferences submenu, Settings
dialog.</p>
<p>It contains the following controls:</p>
<ul>
<li>Type the string to be used as a separator between contents added to the
clipboard: Allows to set a separator which can be used to find the text
segments once the entire added text is pasted.</li>
<li>Add text before clip data: It's also possible to choose if the added text
will be appended or prepended.</li>
<li>Select the actions which require previous confirmation: You can choose,
for each action available, if it should be performed inmediately or after
confirmation. Available actions are: add text, clear clipboard, emulate
copy and emulate cut.</li>
<li>Request confirmation before performing the selected actions when: You can
select if confirmations will be requested always, just if text is
contained in the clipboard, or if clipboard is not empty (for example if
you've copied a file, not text).</li>
<li>Format to show the clipboard text as HTML in browse mode: If you're
learning HTML markup language, you may choose Preformatted text in HTML or
HTML as shown in a web browser, to have an idea of how your HTML code will
be rendered by NVDA in a browser. The difference between preformatted and
conventional HTML is that the first option will preserve consecutive
spaces and line breaks, and the second one will compact them. For
example, write some HTML tags like h1, h2, li, pre, etc., select and copy
the text to clipboard, and use clipContentsDesigner add-on to show the
text in a browseable message.</li>
<li>Maximum number of characters when showing clipboard text in browse mode:
Please, be aware that increasing this limit may produce issues if the
clipboard contains large strings of text. The default limit is 100000
characters.</li>
<li>Restore defaults.</li>
</ul>
<p>Poznámky:</p>
<ul>
<li>Ak je otvorené nejaké okno NVDA, nie je možné zobraziť varovanie. V
takomto prípade sa varovanie nezobrazí a akcia sa rovno vykoná.</li>
<li>Emulate copy and emulate cut commands mean that, when these features are
enabled, the add-on will take control of control+c and control+x. This
will allow to select if a confirmation should be requested before
performing the actions corresponding to these keystrokes.</li>
</ul>
<h2>Changes for 22.0.0</h2>
<ul>
<li>Added a button to restore defaults in the add-on settings panel.</li>
<li>The add-on cannot be run in secure mode.</li>
</ul>
<h2>Changes for 17.0</h2>
<ul>
<li>Compatible with NVDA 2023.1.</li>
</ul>
<h2>Changes for 16.0</h2>
<ul>
<li>Reqires NVDA 2022.1 or later.</li>
</ul>
<h2>Changes for 15.0</h2>
<ul>
<li>The command to add text to clipboard is again presented in the input
gestures dialog.</li>
<li>Fixed gestures to copy and cut with Persian keyboard, thanks to
Mohammadhosein Ghezelsofla.</li>
</ul>
<h2>Changes for 14.0</h2>
<ul>
<li>Compatible with NVDA 2021.1.</li>
</ul>
<h2>Changes for 13.0</h2>
<ul>
<li>Fixed an issue in visual layout of the settings panel, thanks to Cyrille
Bougot.</li>
<li>Improved documentation.</li>
<li>Added a Clip Contents Designer category to assign input gestures to all
commands available for this add-on.</li>
<li>Fixed bugs when using emulate copy in browsers if focus mode is active.</li>
<li>You can assign different gestures to show the clipboard textual contents
as raw text or formatted in HTML. The Format to show the clipboard text in
the settings panel has being modified accordingly, to select the two
options available for HTML format.</li>
</ul>
<h2>Changes for 12.0</h2>
<ul>
<li>Fixed bugs when using emulate copy in applications like LibreOffice
Writer.</li>
</ul>
<h2>Zmeny vo verzii 11.0</h2>
<ul>
<li>Odteraz je možné do schránky pridať aj reťazce označené štandardnými
príkazmi na označovanie pomocou prezeracieho kurzora (NVDA+F9,
NVDA+F10). Nvda+windows+F9 sa už nepoužíva, pre lepšiu integráciu so
skratkou nvda+shift+F9.</li>
<li>Vyžaduje NVDA od verzie 2019.3.</li>
</ul>
<h2>Zmeny vo verzii 10.0</h2>
<ul>
<li>Opravená chyba, ktorá nastávala pri zobrazení názvu okna so zobrazením
textu v režime prehliadania, ak boli v názve okna špeciálne znaky.</li>
<li>Abdel opravil problémy s kopírovaním na Arabskom rozložení klávesnice.</li>
</ul>
<h2>Zmeny vo verzii 9.0</h2>
<ul>
<li>Pridané zobrazenie obsahu schránky v režime prehliadania.</li>
<li>Pridaná možnosť zobraziť varovanie, ak schránka nie je prázdna, napríklad
ak sú v schránke súbory a priečinky.</li>
<li>Vyžaduje sa NVDA od verzie 2018.4.</li>
</ul>
<h2>Zmeny vo verzii 8.0</h2>
<ul>
<li>Nastavenia doplnku pridané do stromu s nastaveniami NVDA.</li>
<li>Vyžaduje NVDA od verzie 2018.2.</li>
<li>Stále si môžete stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=ccd-o">verziu pre NVDA 2017.3</a>.</li>
</ul>
<h2>Zmeny vo verzii 7.0</h2>
<ul>
<li>Ak nepovolíte simulovanie kopírovania pri inštalácii, doplnok neupravuje
klávesové skratky.</li>
</ul>
<h2>Zmeny vo verzii 6.0</h2>
<ul>
<li>Added options to choose if available actions should be performed after
confirmation.</li>
<li>Added Emulate copy and Emulate cut commands, which could be assigned from
the Input gestures dialog.</li>
<li>Added a dialog to configure the Emulate copy and Emulate cut
functionalities at installation. This allows to add the control+c and
control+x commands to copy and cut, and be asked if you want to replace
the clipboard contents when pressing these keystrokes.</li>
<li>Fixed documentation for script_add (Windows+NVDA+c).</li>
</ul>
<h2>Zmeny vo verzii 5.0</h2>
<ul>
<li>Opravené vizuálne zobrazenie dialógov doplnku.</li>
<li>Vyžaduje NVDA od verzie 2016.4</li>
</ul>
<h2>Zmeny vo verzii 4.0</h2>
<ul>
<li>Nastavenia sa ukladajú podľa pravidiel NVDA, takže je možné použiť
konfiguračné profily NVDA a nie je potrebné po preinštalovaní doplnku
nanovo importovať nastavenia.</li>
<li>Odteraz je možné v nastaveniach doplnku určiť, či sa bude text vkladať na
koniec alebo na začiatok obsahu schránky.</li>
</ul>
<h2>Zmeny vo verzii 3.0</h2>
<ul>
<li>Braillovské znaky pre matematické operátory je takisto možné vkladať do
schránky, ak je k dispozícii MathPlayer.</li>
<li>Ak nezadáte znaky na oddelenie, použije sa jeden prázdny riadok.</li>
<li>Nastavenia doplnku je možné vyvolať klávesovou skratkou, ktorú si
nastavíte v dialógu klávesové skratky.</li>
<li>Pridané začiarkávacie políčko, ktoré zaistí importovanie nastavení po
preinštalovaní doplnku.</li>
</ul>
<h2>Zmeny vo verzii 2.0</h2>
<ul>
<li>Znaky v jazyku Hindi môžu byť použité na oddelenie častí schránky.</li>
</ul>
<h2>Zmeny vo verzii 1.0</h2>
<ul>
<li>prvé vydanie.</li>
</ul>
Pokročilé dotykové gestáhttp://addons.nvda-project.org/addons/enhancedTouchGestures.sk.html2023-05-10T20:38:33Z2014-12-06T20:33:40Z
<ul>
<li>Autor: Joseph Lee</li>
<li>Stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=enhancedTouchGestures">stabilnú verziu</a></li>
<li>NVDA compatibility: 2022.4 and later</li>
</ul>
<p>Poskytuje doplnkové dotykové gestá na ovládanie NVDA a tiež gestá pre prácu
v režime prehliadania.</p>
<p>Note: this add-on requires NVDA 2022.3 or later running on a touchscreen
computer with Windows 10 or 11.</p>
<h2>Príkazy</h2>
<h3>Všeobecné</h3>
<ul>
<li>Poklepanie štyrmi prstami: Aktivuje a deaktivuje nápovedu vstupu.</li>
<li>Švihnutie vpravo štyrmi prstami: Aktivuje dotykovú klávesnicu.</li>
<li>Four finger flick left: toggle dictation (Windows+H; Windows 10 Version
1709 or later).</li>
</ul>
<h3>Objektový režim</h3>
<ul>
<li>Švihnutie dole troma prstami: Prečíta názov aktuálneho okna.</li>
<li>Švihnutie vľavo troma prstami: Oznámi zameraný objekt.</li>
<li>Švihnutie vpravo troma prstami: Oznámi navigačný objekt.</li>
<li>Švihnutie hore štyrmi prstami: Oznámi názov aktuálneho okna.</li>
<li>Švihnutie dole štyrmi prstami: Oznámi stavový riadok.</li>
</ul>
<h2>Webový režim</h2>
<p>Tento režim umožňuje prezeranie dokumentov a prechádzanie po jednotlivých
prvkoch dokumentu. Webový režim aktivujete v režime prehliadania poklepaním
troma prstami. Švihaním hore a dole následne prechádzate medzi dostupnými
prvkami. Švihaním doľava a doprava potom skáčete po vybratých prvkoch. Po
opustení dokumentu sa automaticky aktivuje objektový režim.</p>
<h2>Nastavenia kruhu hlasového výstupu</h2>
<p>Pomocou dotykových gest môžete rovnako ako z klávesnice okamžite upravovať
nastavenia hlasového výstupu. Švihaním dvoma prstami vľavo a vpravo
vyberiete parameter, ktorý chcete zmeniť. Švihaním dvoma prstami hore a dole
následne upravujete hodnoty.</p>
<h2>Version 23.02</h2>
<ul>
<li>NVDA 2022.4 or later is required.</li>
<li>Windows 10 21H2 (November 2021 Update/build 19044) or later is required.</li>
</ul>
<h2>Version 23.01</h2>
<ul>
<li>NVDA 2022.3 or later is required.</li>
<li>Windows 10 or later is required as Windows 8.1 is no longer supported by
Microsoft as of January 2023.</li>
<li>It is possible to reassign touch keyboard and dictation toggle commands
from input gestures dialog under Enhanced Touch Gestures category.</li>
<li>Removed read-only state workaround for touch keyboard keys as it is
resolved in Windows 10.</li>
</ul>
<h2>Version 22.03</h2>
<ul>
<li>NVDA 2021.3 or later is required.</li>
<li>A warning message will be displayed when attempting to install the add-on
on Windows 7, 8, and 8.1.</li>
</ul>
<h2>Version 21.10</h2>
<ul>
<li>NVDA 2021.2 or later is required due to changes to NVDA that affects this
add-on.</li>
</ul>
<h2>Version 21.08</h2>
<ul>
<li>Initial support for Windows 11.</li>
</ul>
<h2>Version 21.01</h2>
<ul>
<li>NVDA 2020.3 or later is required.</li>
<li>On Windows 10 Version 1709 and later, doing a four finger flick left will
toggle dictation (Windows+H).</li>
<li>Remove dedicated touch interaction support toggle command from the add-on.</li>
<li>As touch interaction support can be toggled from NVDA's touch interaction
settings panel, a dedicated Enhanced Touch Gestures settings panel has
been removed.</li>
</ul>
<h2>Verzia 20.09</h2>
<ul>
<li>Odstránená funkcia na dočasné vypnutie dotykových gest.</li>
<li>Odstránené signalizovanie polohy.</li>
</ul>
<h2>Verzia 20.07</h2>
<ul>
<li>Pridaná skratka na zapínanie a vypínanie ovládania pomocou dotykovej
obrazovky.</li>
<li>NVDA od verzie 2020.1 obsahuje dotykové gesto simulujúce kliknutie pravým
tlačidlom myši. Preto bola táto funkcia z doplnku odstránená. Zároveň to
znamená, že doplnok správne funguje v NVDA od verzie 2020.1.</li>
<li>Funkcia dočasného vypnutia ovládania pomocou dotykov sa viac nevyvíja a
máme v pláne ju odstrániť. Skratka bude v budúcnosti len zapínať a vypínať
ovládanie pomocou dotykovej obrazovky.</li>
<li>Vzhľadom na zmeny v dotykových gestách vo vývojových verziách NVDA je v
týchto verziách nedostupný panel nastavení doplnku. Klávesová skratka
vypína alebo zapína ovládanie pomocou dotykovej obrazovky.</li>
<li>Oznamovanie pozície zvukom sa viac nevyvíja a bude čoskoro odstránené.</li>
<li>NVDA pri používaní dotykovej klávesnice neoznamuje pozíciu zvukom.</li>
<li>NVDA viac nezamrzne pri prezeraní emoji panela a podobných prvkov pomocou
dotykových gest.</li>
<li>NVDA zobrazí chybu, ak nie je možné zobraziť dotykovú klávesnicu.</li>
</ul>
<h2>Verzia 20.06</h2>
<ul>
<li>Oopravené drobné chyby v kóde.</li>
</ul>
<h2>Verzia 20.04</h2>
<ul>
<li>Gesto na simulovanie kliknutia pravým tlačidlom myši je priamo súčasťou
NVDA 2020.1.</li>
</ul>
<h2>Verzia 20.01</h2>
<ul>
<li>Vyžaduje NVDA od verzie 2019.3.</li>
<li>Ak je vypnutá podpora pre dotykové gestá, vypnú sa aj gestá na zapínanie a
vypínanie pokročilých gest a tiež gesto na prepustenie dotykov.</li>
</ul>
<h2>Verzia 19.11</h2>
<ul>
<li>Pridané texty do nápovedy vstupu.</li>
</ul>
<h2>Verzia 19.09</h2>
<ul>
<li>Gestá sa dajú vypnúť kedykoľvek, aj v iných profiloch.</li>
</ul>
<h2>Verzia 19.07</h2>
<ul>
<li>Interné zmeny, príprava na podporu budúcich verzií NVDA.</li>
</ul>
<h2>Verzia 18.12</h2>
<ul>
<li>Interné zmeny, príprava na podporu budúcich verzií NVDA.</li>
</ul>
<h2>Verzia 18.08</h2>
<ul>
<li>Vyžaduje NVDA od verzie 2018.3.</li>
</ul>
<h2>Verzia 18.06</h2>
<ul>
<li>Nastavenia presunuté do stromu nastavení NVDA.</li>
<li>Opravená kompatibilita s wxPython 4.</li>
</ul>
<h2>Verzia 18.04</h2>
<ul>
<li>Pri zmene nastavení viac NVDA neprehráva chybový zvuk.</li>
</ul>
<h2>Verzia 18.03</h2>
<ul>
<li>Vyžaduje NVDA 2018.1.</li>
<li>Odstránené nastavenie Písať okamžite po dotyku, keďže táto funkcia je
súčasťou NVDA.</li>
</ul>
<h2>Verzia 17.12</h2>
<ul>
<li>Vyžaduje NVDA 2017.4. Umožňuje mať špecifické nastavenia v konfiguračných
profiloch.</li>
<li>Keďže táto verzia NVDA oznamuje orientáciu obrazovky, bola táto funkcia
odstránená z doplnku.</li>
<li>Pridané začiarkávacie políčko na vypnutie podpory dotyku (ak je aktívny
iný ako normálny profil).</li>
<li>V NVDA od verzie 2018.1 je v menu dialóg s nastaveniami pre dotykové gestá
dvakrát. Druhý patrí k tomuto doplnku.</li>
<li>Funkcia písať okamžite po dotyku nie je dostupná, ak používate NVDA od
verzie 2018.1.</li>
</ul>
<h2>Verzia 17.10</h2>
<ul>
<li>Odstránená podpora pre Windows 8.</li>
<li>NVDA vo vývojovej verzii 2017.4 neoznamuje dvakrát orientáciu obrazovky.</li>
</ul>
<h2>Verzia 17.07.1</h2>
<ul>
<li>Pridaná možnosť ručne prepínať prepustenie dotykov bez časovača.</li>
<li>Ak aktivujete prepustenie pred uplynutím času predchádzajúceho
prepustenia, prepustenie sa deaktivuje a aktivuje sa normálne správanie
NVDA.</li>
</ul>
<h2>Verzia 17.07</h2>
<ul>
<li>Pridané nastavenia doplnku.</li>
<li>Po nainštalovaní doplnku funguje písanie tak, že je potrebné na príslušný
znak poklepať. Môžete začiarknúť funkciu písať okamžite po dotyku v
nastaveniach doplnku.</li>
<li>Pridaná možnosť ignorovať dotykové gestá (prepustenie do 10 sekúnd).</li>
<li>Pridaná možnosť nastaviť dĺžku prepustenia. V tomto čase sa budú gestá
posielať priamo do systému, ako keby nebolo NVDA spustené.</li>
<li>Do záznamu sa pridávajú informácie pri gesteklepnúť a podržať (vykonáva
kliknutie pravým tlačidlom myši). Toto správne funguje len v NVDA od
verzie 2017.1.</li>
<li>Vyžaduje sa NVDA od verzie 2017.1, hlavne pre zmeny, ktoré sa urobili v
NVDA na oznamovanie pozície myši zvukom.</li>
</ul>
<h2>Version 17.03</h2>
<ul>
<li>Opravené oznamovanie pozície kurzora myši zvukom pre NVDA od verzie
2017.1.</li>
</ul>
<h2>Version 16.12</h2>
<ul>
<li>Webový režim funguje v aplikáciách MS Edge, Word a ďalších.</li>
<li>Do webového režimu pridaná možnosť prechádzať po oblastiach stránky a
zoznamoch.</li>
</ul>
<h2>Verzia 16.06</h2>
<ul>
<li>Prvé stabilné vydanie.</li>
</ul>
NV Speech Player. Syntéza reči postavená na systéme Klatt, napísaná vjazyku c++.http://addons.nvda-project.org/addons/nvSpeechPlayer.sk.html2023-05-10T20:38:33Z2014-08-26T09:28:59Z
<ul>
<li>Autor: NV Access</li>
<li>Stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=nvsp">NV Speech Player pre NVDA od verzie 2019.3</a></li>
</ul>
<h2>Úvod</h2>
<p>NV Speech Player je voľne dostupný prototyp syntézy reči s otvoreným
kódom. Môžete ho používať s čítačom obrazovky NVDA. Na generovanie reči sa
používa Syntéza Klatt, ktorá pripomína v zahraničí populárne syntézy reči
ako Dectalk alebo Eloquence. (Poznámka prekladateľa: Syntéza v súčasnosti
podporuje len Angličtinu).</p>
<h2>Licencia a autorské práva</h2>
<p>Copyright (c) 2014, dielo vývojárov NV Speech playeru. Distribúcia je možná
pod licenciou GNU General Public License 2.0. Tento produkt môžete voľne
šíriť a meniť rôznym spôsobom, podmienkou však je pripojiť k nemu túto
licenciu a sprístupniť zdrojový kód každému, kto si to vyžiada. Týka sa to
oboch pôvodných, aj upravených kópií daného software a odvodených diel. Celú
licenciu si môžete prečítať (anglicky) na
http://www.gnu.org/licenses/old-licenses/gpl-2.0.html</p>
<h2>Pozadie</h2>
<p>V sedemdesiatych a osemdesiatych rokoch bolo viacero výskumov zameraných na
syntézu reči. Jedným z najvýznamnejších modelov bola formantová syntéza,
známa ako Klatt syntéza. Veľmi známe Klatt syntézy reči sú Dectalk a
Eloquence. Sú veľmi vhodné pre nevidiacich používateľov, lebo majú rýchlu
odozvu, výslovnosť je zrozumiteľná a nezaberajú veľa pamäte. Výskum sa však
v súčasnosti posunul k iným formám syntézy, napríklad k syntéze založenej na
hlasových vzorkách, ktorá má pomalšiu odozvu, ale viac pripomína ľudský
hlas. Toto sa ukazuje ako výhoda v telefónnych systémoch, alebo GPS
zariadeniach, ale ako nevýhoda pre nevidiacich, ktorí uprednostňujú rýchlu
odozvu a presnosť pred dobre znejúcim hlasom.</p>
<p>Hoci hlasy ako Dectalk a Eloquence sa používajú už vyše dvadsať rokov, je
čoraz ťažšie sa k nim dostať, lebo firmy ich považujú za zastaralé a viac
ich nevyvíjajú.</p>
<p>hlasy založené na hlasových vzorkách majú v súčasnosti čoraz lepšiu odozvu a
zvyšuje sa aj zrozumiteľnosť ich prejavu. Takmer všetky kvalitné produkty sú
komerčné a pomerne drahé.</p>
<p>Aj Dectalk a Eloquence boli komerčné produkty s uzavretým kódom. Existuje
však množstvo zdrojových kódov a výskumov zameraných na Klatt syntézu. NV
Speech Player sa pokúša využiť tieto možnosti a byť tak novodobím prototypom
Klatt syntézy, v snahe byť náhradou produktov Dectalk alebo Eloquence, alebo
aspoň obnoviť výskum a diskusiu o tomto type syntézy.</p>
<p>Hlasový výstup eSpeak, ktorý je voľne dostupný a má otvorený kód, sa pre
mnohých ukázal ako dobrá náhrada. Avšak veľa ľudí, ktorí ho počuli,
poukazujú na jeho "plechový" zvuk a nedokážu ho dlhodobo používať. Autori NV
Speech Playeru stále primárne používajú eSpeak, snažia sa však pochopiť
tento zvláštny otpor k eSpeaku. Domnievame sa, že jedným z problémov môže
byť spektrálna analýza vs. Klatt syntéza. Je tiež možné, že problém
spôsobujú spoluhlásky, ktoré pochádzajú z reálnych nahratých vzoriek a sú
preto vnímané ako umelo vložené do toku reči.</p>
<h2>Implementácia</h2>
<p>Samotná syntéza je napísaná v jazyku C++ s použitím moderného jazyka, ale
pridržiavali sme sa implementácie klsyn-88, ktorú môžete nájsť (anglicky) na
http://linguistics.berkeley.edu/phonlab/resources/</p>
<p>Text na fonémy reprezentované v IPa rozkladáme pomocou eSpeaku, aby bolo
možné zachovať existujúce slovníky pre eSpeak. eSpeak môžete nájsť na
http://espeak.sourceforge.net/</p>
<p>Klatt formantové dáta pre fonémy vychádzajú z projektu PyKlatt:
http://code.google.com/p/pyklatt/ avšak dáta sme ďalej vylepšili testovaním
a porovnaním s dátami v eSpeaku.</p>
<p>pravidlá pre dĺžku foném, pauzy, rýchlosť a intonáciu sme ručne napísali v
Pythone, pričom sme sa snažili čo najviac držať sa intonácie použitej v
eSpeaku.</p>
<h2>Kompilovanie doplnku</h2>
<p>Potrebujete: - Python 3.7: http://www.python.org - SCons 3:
http://www.scons.org/ - Visual Studio 2019 Community</p>
<p>Na skompilovanie: spustite scons</p>
<p>po skompilovaní by ste v koreňovom adresári mali vidieť súbor
nvSpeechPlayer_xxx.nvda-addon, kde XXX je Git revízia alebo nastavené číslo
verzie. Po nainštalovaní doplnku do NVDA môžete syntézu okamžite
používať. Všetko, čo potrebujete je priamo v doplnku, nie sú vyžadované
externé knižnice a súbory.</p>
Bit Chehttp://addons.nvda-project.org/addons/bitChe.sk.html2023-05-10T20:38:33Z2013-12-06T10:30:33Z
<ul>
<li>Vytvorili: Alberto Zanella, Alberto Buffolino a ďalší.</li>
<li>Stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=bc">stabilnú verziu</a></li>
<li>stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=bc-dev">vývojovú verziu</a></li>
</ul>
<p>Bit Che je nástroj, ktorý prehľadáva populárne bit torrent stránky. Viac
informácii o programe zistíte na <a href="https://www.convivea.com">tejto stránke</a>.</p>
<p>Tento doplnok upravuje prístupnosť programu a pridáva tieto funkcie:</p>
<ul>
<li>Zoznam výsledkov hľadania je prístupný.</li>
<li>Umožňuje aktivovať kontextové menu na vybratom výsledku.</li>
</ul>
<h2>Poznámky</h2>
<ul>
<li>Na výber výsledku hľadania použite šípky.</li>
<li>Niekedy po prvom štarte Bit Che a prvom hľadaní má prvý výsledok fokus,
ale nie je vybratý. NVDA oznámy tento výsledok. Je ale dobré výsledok
vybrať napr šípkami, aby ste sa uistili, že výsledok je označený.</li>
</ul>
<h2>Klávesové skratky</h2>
<ul>
<li>Kontextové menu, alebo shift+f10 otvorí kontextovú ponuku.</li>
</ul>
<h2>Zmeny vo verzii 2.0</h2>
<ul>
<li>Návod k doplnku nájdete v správcovi doplnkov.</li>
</ul>
<h2>Zmeny vo verzii 1.5</h2>
<ul>
<li>Aktualizované preklady.</li>
</ul>
<h2>Zmeny vo verzii 1.4</h2>
<ul>
<li>pridaný odkaz na vývojovú verziu</li>
</ul>
<h2>Zmeny vo verzii 1.3</h2>
<ul>
<li>pridaná funkcia, ktorá zaručí kontrolu staršej verzie a jej prípadné
odstránenie.</li>
</ul>
<h2>Zmeny vo verzii 1.2</h2>
<ul>
<li>pridaná skratka shift+F10 na otvorenie kontextového menu.</li>
</ul>
<h2>Zmeny vo verzii 1.1</h2>
<ul>
<li>Zlepšená prístupnosť zoznamu výsledkov a položiek.</li>
</ul>
<h2>Zmeny vo verzii 1.0</h2>
<ul>
<li>Prvé vydanie.</li>
</ul>
RSS Čítačkahttp://addons.nvda-project.org/addons/readFeeds.sk.html2024-02-13T14:37:07Z2013-11-16T13:45:30Z
<ul>
<li>Authors: Noelia Ruiz Martínez, Mesar Hameed</li>
</ul>
<p>Poskytuje jednoduchý spôsob čítania kanálov vo formátoch Atom alebo RSS
pomocou NVDA. Kanály sa neobnovia automaticky. Nižšie, keď spomíname
informačné kanály, máme na mysli informačné kanály RSS aj ATOM.</p>
<h2>Commands</h2>
<h3>Read Feeds dialog</h3>
<p>You can access the Read Feeds dialog from the nvda menu, Tools submenu,
Feeds item.</p>
<p>It contains the following controls:</p>
<ul>
<li>Filter: Editačné pole na vyhľadávanie uložených kanálov.</li>
<li>A list of the saved feeds, focused when the dialog is opened.</li>
<li>Zoznam článkov: Otvorí zoznam článkov z vášho aktuálneho informačného
kanála. Vyberte článok, ktorý si chcete prečítať, a stlačte kláves Enter
alebo tlačidlo Otvoriť webovú stránku, aby ste otvorili príslušnú stránku
v prehliadači. Stlačením tlačidla Informácie o článku otvoríte dialógové
okno s názvom a odkazom na vybraný článok; z tohto dialógového okna budete
môcť tieto informácie skopírovať do schránky.</li>
<li>Otvoriť informačný kanál: Otvorí vybraný informačný kanál v predvolenej
aplikácii.</li>
<li>Open feed as HTML: Opens the selected feed in the default web browser. You
will be able to show or hide publication dates and buttons to copy
information about articles to clipboard.</li>
<li>Copy feed address: Opens a dialog to confirm if you want to copy the feed
address to clipboard.</li>
<li>Nový: otvorí dialógové okno, kde môžete vložiť adresu informačného
kanála. Ak je adresa platná a informačný kanál je možné uložiť, Kanál je
pridaný na koniec zoznamu kanálov.</li>
<li>Premenovať: Otvorí dialógové okno v ktorom môžete zadať nový názov kanála.</li>
<li>Odstrániť: Umožní odstrániť vybratý informačný kanál.</li>
<li>Nastaviť predvolené: Nastaví vybraný informačný kanál ako predvolený, aby
k jeho článkom bolo možné pristupovať pomocou klávesových skratiek.</li>
<li>Import feeds from OPML file: Opens a dialog to add new feeds from an OPML
file.</li>
<li>Save feeds to OPML file: Opens a dialog to save the feeds available from
the Feeds dialog in an OPML file.</li>
<li>Preferences: Opens the settings dialog for readFeeds, also available in
NVDA's menu, Preferences, settings, readFeeds category.</li>
<li>Zatvoriť: Zatvorí dialógové okno informačné kanály.</li>
</ul>
<h3>Notes</h3>
<ul>
<li>The Filter by edit box can be placed after the Open article button from
NVDA's menu, Preferences, Settings, Read feeds category, or pressing the
Preferences button of the Feeds dialog.</li>
<li>This panel has an option to show article dates on the List of articles
dialog.</li>
</ul>
<h3>Keyboard commands</h3>
<ul>
<li>Ctrl+Shift+NVDA+Medzera: Oznamuje URL aktuálneho článku. Stlačené dvakrát
rýchlo za sebou otvorí webovú stránku.</li>
<li>Ctrl+Shift+NVDA+8: Obnoví vybraný informačný kanál a oznámi názov
posledného článku.</li>
<li>Ctrl+Shift+NVDA+I: Oznamuje aktuálny názov informačného kanála a
odkaz. Stlačené dvakrát rýchlo za sebou skopíruje názov a odkaz do
schránky.</li>
<li>Ctrl+Shift+NVDA+U: oznámi predchádzajúci článok.</li>
<li>Ctrl+Shift+NVDA+O: Oznámi nasledujúci článok.</li>
</ul>
<h2>Notifications</h2>
<ul>
<li>Po skopírovaní názvu alebo adresy URL do schránky.</li>
<li>Ak sa nedá pripojiť/obnoviť informačný kanál alebo webová adresa
nezodpovedá platnému informačnému kanálu.</li>
<li>NVDA will display an error message if a new feed cannot be created.</li>
<li>Názov dialógového okna so zoznamom článkov obsahuje vybratý názov
informačného kanála a počet dostupných položiek.</li>
</ul>
<h2>Changes for 21.0</h2>
<ul>
<li>Feeds with untitled articles can be presented in the Articles dialog, and
opened as HTML.</li>
</ul>
<h2>Changes for 20.0</h2>
<ul>
<li>universalFeedParser is updated to 5.0.1, adding support for more feeds.</li>
</ul>
<h2>Changes for 14.0</h2>
<ul>
<li>Fixed a bug that made impossible to add some feeds.</li>
</ul>
<h2>Changes for 13.0</h2>
<ul>
<li>The add-on cannot be used on secure screens.</li>
<li>Feeds are managed from OPML files.</li>
<li>Due to changes in the feeds management system, there are changes in the
configuration file where the default feed is set. Please, use the Feeds
dialog if you want to set it again.</li>
<li>Your old text files used in previous versions will be automatically
imported into the new OPML format when the add-on is started.</li>
<li>The copy and restore feeds feature has been replaced with the ability to
import from and save to OPML files.</li>
<li>Non well-formed feeds can be processed before being added to make them
compatible with the add-on.</li>
<li>In the Read Feeds settings panel, a new option allows to show article
dates on the List of articles dialog.</li>
</ul>
<h2>Changes for 12.0</h2>
<ul>
<li>Fixed a bug which made shortcuts for items of NVDA's tools menu don't work
as expected.</li>
</ul>
<h2>Changes for 11.0</h2>
<ul>
<li>Compatible with NVDA 2021.1</li>
</ul>
<h2>Changes for 10.0</h2>
<ul>
<li>Added a button to open the selected feed as HTML in the default web
browser.</li>
<li>If a new feed cannot be created, this will be notified in an error dialog.</li>
<li>Improved order and presentation of some articles.</li>
<li>More feeds may be supported.</li>
<li>When the feeds dialog is opened, the list of feeds will be focused instead
of the search edit box.</li>
<li>You can choose if the search edit box is placed after the list of feeds,
useful to focus the list even when switching from another window without
closing the Feeds dialog.</li>
<li>Added a button to copy the feed address to clipboard from the feeds
dialog.</li>
</ul>
<h2>Zmeny vo verzii 9.0</h2>
<ul>
<li>Vyžaduje NVDA od verzie 2019.3.</li>
</ul>
<h2>Zmeny vo verzii 8.0</h2>
<ul>
<li>Po inštalácii novej verzie doplnku sa automaticky importujú uložené
kanály, v prípade, že nepreferujete ukladanie do hlavného adresára s
nastaveniami NVDA.</li>
<li>Ak kopírujete kanály a nový priečinok sa nevolá personalFeeds, bude takýto
priečinok vytvorený a do neho budú importované nastavenia, aby nedošlo k
zmazaniu dôležitých adresárov.</li>
</ul>
<h2>Zmeny vo verzii 7.0</h2>
<ul>
<li>Pridané tlačidlo na otvorenie adresára so zálohou.</li>
<li>Ak ste zadali reťazec na filtrovanie a žiadna položka nezodpovedá filtru,
ostatné položky v dialógu sa skryjú.</li>
<li>Ak nie je možné zobraziť zoznam článkov, napríklad z dôvodu chýb v
informačnom kanáli, NVDA zobrazí chybu, takže dialógové okno informačných
kanálov sa dá použiť bez reštartovania NVDA.</li>
</ul>
<h2>Zmeny vo verzii 6.0</h2>
<ul>
<li>Po aktualizácii predvoleného informačného kanála a jeho nefunkčnosti z
dôvodu problémov so serverom sa predchádzajúce články neodstránia a dajú
sa prečítať pomocou klávesových skratiek.</li>
<li>Predvolený informačný kanál možno znova aktualizovať dvakrát.</li>
</ul>
<h2>Zmeny vo verzii 5.0</h2>
<ul>
<li>Vylepšené okno so zoznamom článkov.</li>
<li>Vyžaduje sa NVDA od verzie 2018.3.</li>
<li>V prípade potreby si môžete stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=rf-o">poslednú verziu kompatibilnú s NVDA
2017.3</a>.</li>
</ul>
<h2>Zmeny vo verzii 4.0</h2>
<ul>
<li>Pridané tlačidlo na otvorenie vybraného informačného kanála v dialógovom
okne Informačné kanály.</li>
</ul>
<h2>Zmeny vo verzii 3.0</h2>
<ul>
<li>Dialógové okná na správu súborov informačného kanála boli
odstránené. Funkcie sú zahrnuté v dialógovom okne Informačné kanály.</li>
<li>Vylepšená vizuálna prezentácia dialógov.</li>
<li>Predvolený informačný kanál je uložený v nastaveniach NVDA. Preto je možné
mať v rôznych profiloch rôzne predvolené informačné kanály.</li>
<li>Vyžaduje NVDA 2016.4.</li>
</ul>
<h2>Zmeny vo verzii 2.0</h2>
<ul>
<li>Návod k doplnku nájdete v správcovi doplnkov.</li>
</ul>
<h2>Zmeny vo verzii 1.0</h2>
<ul>
<li>Prvé vydanie.</li>
</ul>
GoldWavehttp://addons.nvda-project.org/addons/goldwave.sk.html2023-05-10T20:38:33Z2013-11-04T09:15:31Z
<ul>
<li>Autori: Joseph Lee, tím NVDA.</li>
<li>Stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=goldwave">stabilnú verziu</a></li>
<li>NVDA compatibility: 2022.4 and later</li>
</ul>
<p>Tento aplikačný modul zvyšuje prístupnosť a použiteľnosť zvukového editoru
goldwave.</p>
<h2>Klávesové skratky</h2>
<ul>
<li>NVDA+Shift+C: prepína oznamovanie príkazov počas úpravy zvuku.</li>
<li>ctrl+Shift+P: Oznámy pozíciu v aktuálnej stope.</li>
<li>Nvda+shift+R: oznámuje zostávajúci čas otvoreného súboru.</li>
<li>Ctrl+NVDA+1: oznámy kanál, ktorý upravujete.</li>
<li>Ctrl+NVDA+2: Oznámy celkovú dĺžku audio súboru.</li>
<li>Ctrl+NVDA+3: Oznámy informácie o aktuálnom výbere.</li>
<li>Ctrl+NVDA+4: oznamuje úroveň priblíženia.</li>
</ul>
<p>pre viac informácii o klávesových skratkách programu Goldwave si prečítajte
návod k programu Goldwave.</p>
<p>Note: GoldWave 6 or later is required.</p>
<h2>Version 23.02</h2>
<ul>
<li>NVDA 2022.4 or later is required.</li>
<li>Windows 10 21H2 (November 2021 Update/build 19044) or later is required.</li>
</ul>
<h2>Version 23.01</h2>
<ul>
<li>NVDA 2022.3 or later is required.</li>
<li>Windows 10 or later is required as Windows 7, 8, and 8.1 are no longer
supported by Microsoft as of January 2023.</li>
</ul>
<h2>Version 22.03</h2>
<ul>
<li>NVDA 2021.3 or later is required.</li>
<li>A warning message will be displayed when attempting to install the add-on
on Windows 7, 8, and 8.1.</li>
</ul>
<h2>Version 21.10</h2>
<ul>
<li>NVDA 2021.2 or later is required due to changes to NVDA that affects this
add-on.</li>
<li>In GoldWave 6.57 and later, NVDA will no longer repeat the name of the
loaded file when pressing play/rewind/stop keys.</li>
</ul>
<h2>Version 21.06</h2>
<ul>
<li>Resolved additional coding style issues and potential bugs with Flake8.</li>
</ul>
<h2>Verzia 20.04</h2>
<ul>
<li>Opravené drobné chyby v kóde.</li>
</ul>
<h2>Verzia 20.04</h2>
<ul>
<li>Pridaný popis skratky na zisťovanie ostávajúceho času do nápovedy vstupu
(skratka nvda+shift+r).</li>
<li>Skratka na nastavenie hlásení (nvda+shift+c) sa odteraz dá upravovať v
dialógu klávesové skratky, vetva Goldwave.</li>
</ul>
<h2>Verzia 20.01</h2>
<ul>
<li>Funguje s NVDA od verzie 2019.3.</li>
</ul>
<h2>Verzia 19.11</h2>
<ul>
<li>Vyžaduje sa Windows 7 SP1, GoldWave 6.x, a NVDA 2019.1.</li>
<li>Pridaná pomocná správa pre okno so zvukom (funguje ak sa používa doplnok
Pomoc na práci s prvkami).</li>
</ul>
<h2>Verzia 18.12</h2>
<ul>
<li>NVDA viac nehlási chybu pri opužití skratiek a súčasnom vypnutí
výrečnosti.</li>
<li>Interné zmeny ako príprava na budúce verzie NVDA.</li>
</ul>
<h2>Verzia 18.07</h2>
<ul>
<li>Odteraz sa zobrazujú nuly, ak sú na začiatku ostávajúceho času súboru.</li>
</ul>
<h2>Verzia 17.05</h2>
<ul>
<li>Od verzie NVDA 2017.1 sa informácie o činosti doplnku zapisujú do logu
NVDA ak je nastavené zaznamenávanie na debug.</li>
<li>Nové a aktualizované preklady.</li>
</ul>
<h2>Verzia 16.12</h2>
<ul>
<li>Verzie číslujeme ako rok.mesiac.</li>
</ul>
<h2>Zmeny vo verzii 4.0</h2>
<ul>
<li>Repozitár dopnku presunutý na GitHub
(https://github.com/josephsl/goldwave).</li>
<li>Zrýchlená odozva pri zisťovaní informácie o kanáloch a iných stavových
údajoch.</li>
</ul>
<h2>Zmeny vo verzii 3.0</h2>
<ul>
<li>Pridaná skratka, ktorá oznamuje ostávajúci čas ( nvda+shift+r).</li>
<li>Mierne upravené oznamovanie stavových informácií.</li>
</ul>
<h2>Zmeny vo verzii 2.0</h2>
<ul>
<li>Podpora pre Goldwave 6 vrátane 64-bitovej verzie (pozrite poznámku vyššie)</li>
<li>Pomocník doplnku si môžete pozrieť priamo zo správcu doplnkov (od verzie
2014.3)</li>
<li>NVDA odteraz oznamuje vybratý kanál, ak na výber použijete skratky,a ko
napr ctrl+shift+l.</li>
<li>Vyriešené problémy s editačnými poliami v dialógu mix, takže správne
funguje výber textu a úprava údajov.</li>
<li>Oznamovanie funkcií si NVDA zapamätá aj po prechode do okna inej
aplikácie.</li>
</ul>
<h2>Zmeny pre verziu 1.2</h2>
<ul>
<li>opravená chyba, pri ktorej NVDA neoznamovalo správne niektoré editačné
polia.</li>
<li>Nové a aktualizované preklady.</li>
<li>Berte prosím na vedomie, že vvzhľadom na posledné zmeny v NVDA, niektoré
príkazy na označovanie audia nemusia fungovať korektne.</li>
</ul>
<h2>Zmeny pre verziu 1.1</h2>
<ul>
<li>Podpora pre zobrazovanie správ na brailovských riadkoch.</li>
<li>Súhrn výberu je oznamovaný aj v iných jazykoch, nie len v angličtine.</li>
<li>Pridané oznamovanie odstránenia za označeným úsekom a oznamovanie
vkladania rozdeľovačov.</li>
<li>opravený problém, keď boli nesprávne oznamované popisy editačných polí v
dialógoch s efektami.</li>
<li>Nové a aktualizované preklady.</li>
</ul>
<h2>Zmeny pre verziu 1.0</h2>
<ul>
<li>prvé vydanie.</li>
</ul>
Emotikonyhttp://addons.nvda-project.org/addons/emoticons.sk.html2024-03-10T17:55:46Z2013-10-21T09:28:36Z
<ul>
<li>Authors: Chris Leo, Noelia Ruiz Martínez, Mesar Hameed, Francisco Javier
Estrada Martínez</li>
</ul>
<p>Tento doplnok interpretuje grafické emotikony slovným popisom.</p>
<p>napríklad: ":)" bude prečítané ako "úsmev". NVDA navyše bude rozpoznávať aj
emoji.</p>
<p>Ďalšie vlastnosti:</p>
<h2>Vloženie emotikonu</h2>
<p>Sometimes an image is worth a 1000 words: use the new emoji to liven up your
instant message and to let your friends know how you’re feeling.</p>
<p>Ak si nie ste istý, ako napísať správne smailíka, tento doplnok vám umožní
vybrať požadovaný symbol zo zoznamu.</p>
<p>Press NVDA+I, or from menu Tools -> Emoticons > Insert emoticon, to open a dialog with the provided emoticons or emoji.</p>
<p>V dialógu uvidíte emotikony na vloženie a tiež tie, ktoré často vkladáte:</p>
<ul>
<li>Pomocou editačného poľa filter môžete rýchlo vyhľadať príslušný emotikon.</li>
<li>Pomocou prepínača môžete zvoliť všetky emotikony (alt+v), emoji (alt+i)
alebo len štandardné emotikony (alt+š).</li>
<li>V zozname (alt+z) sa pri každej položke zobrazuje textový popis, tip a
symbol.</li>
</ul>
<p>Stlačením OK sa príslušný emotikon uloží do schránky. Následne ho môžete
kamkoľvek prilepiť.</p>
<h2>Insert symbol</h2>
<p>This dialog allows you to choose one of the symbols available in the
Punctuation/symbol pronunciation dialog of NVDA. You can use the Filter edit
box or the arrow keys to select an item from the symbols list.</p>
<p>If you want to copy various symbols, use the Add button to append them to
the Symbols to copy edit box.</p>
<p>Then, press OK and the selected emoji or symbol, or the symbols contained in
the mentioned edit box, will be copied to your clipboard, ready for pasting.</p>
<h2>Associate gestures to symbols</h2>
<p>From NVDA's menu, Preferences submenu, Input gestures dialog, category
Insert symbols, you can configure NVDA to type symbols through associated
gestures.</p>
<p>You can use the Edit field edit box to reduce the number of symbols
presented, so that this category can be expanded faster.</p>
<h2>Slovník emotikonov</h2>
<p>Môžete mať rôzne slovníky pre rôzne konfiguračné profily.</p>
<p>V každom konfiguračnom profile NVDA tak môžete mať vlastný slovník
emotikonov.</p>
<p>V menu NVDA >možnosti >emotikony >pridať /upraviť môžete vytvoriť nové, alebo upraviť existujúce emotikony.
V tomto dialógu môžete uložiť vlastný používateľský slovník s emotikonmi.</p>
<p>Keď uložíte zmeny v doplnku pri aktivovanom konfiguračnom profile, zmeny sa
prejavia len v práve aktívnom profile.</p>
<p>Napríklad: Chceme, aby NVDA oznamovalo emotikony v programe Miranda, ale nie
v ostatných aplikáciách. Vytvoríme preto profil pre Mirandu a priradíme k
nemu slovník z rečových slovníkov.</p>
<p>po stlačení tlačidla "Ulož a exportuj slovník" sa používateľský slovník
uloží v priečinku s nastaveniami NVDA, v priečinku speechDicts/emoticons.</p>
<p>Názov slovníka sa určí podľa názvu profilu. Názov sa zobrazí aj v názve okna
pri úprave slovníka.</p>
<h2>Nastavenia</h2>
<p>Aktiváciu slovníka aktivujete v strome s nastaveniami NVDA, vetva emotikony.</p>
<p>Tu môžete určiť, či sa použije slovník s emotikonmi pre práve upravovaný profil. Predvolene je toto nastavenie vypnuté.</p>
<p>Takisto môžete zapnúť a vypnúť oznamovanie emoji. Toto je užitočné v
prípade, že sú emoji súčasťou NVDA.</p>
<p>Tiež môžete z tohto dialógu odstrániť slovníky, ktoré sa viac nepoužívajú a
nie ú asociované so žiadnym profilom.</p>
<h2>Klávesové skratky:</h2>
<p>Klávesové skratky môžete upraviť v dialógu klávesové skratky, vetva
prezeranie textu. Dostupné sú tieto možnosti:</p>
<ul>
<li>NVDA+E: prepína medzi vyslovovaním znakov a popisov emotikonov. Určuje, či
budú oznamované jednotlivé časti emotikonu alebo slovný popis.</li>
<li>NVDA+I: zobrazí dialóg na vloženie požadovaného emotikonu.</li>
<li>Not assigned: show a dialog to select an NVDA's symbol you want to copy.</li>
<li>Nedefinované: Zobraz emotikon pod prezeracím kurzorom režime prehliadania.</li>
<li>Nedefinované: Zobraz emotikon pod systémovým kurzorom v režime
prehliadania.</li>
</ul>
<p>Note: On Windows 10 and higher, it's also possible to use the built-in emoji
panel.</p>
<h2>Changes for 22.0.0</h2>
<ul>
<li>Requires NVDA 2023.2 or later.</li>
</ul>
<h2>Changes for 17.0</h2>
<ul>
<li>Added ability to associate gestures to type symbols.</li>
<li>Added ability to copy various symbols at the same time.</li>
</ul>
<h2>Changes for 16.0</h2>
<ul>
<li>Compatible with NVDA 2023.1.</li>
</ul>
<h2>Changes for 15.0</h2>
<ul>
<li>Requires NVDA 2022.1 or later.</li>
<li>Cannot be used in secure mode.</li>
</ul>
<h2>Changes for 14.0</h2>
<ul>
<li>Compatible with NVDA 2021.1.</li>
</ul>
<h2>Changes for 13.0</h2>
<ul>
<li>Fixed errors in Insert Emoticon dialog.</li>
<li>Added a dialog to insert a symbol available in the Punctuation/symbol
pronunciation of NVDA.</li>
</ul>
<h2>Zmeny vo verzii 12.0</h2>
<ul>
<li>Vyžaduje NVDA od verzie 2019.3.</li>
</ul>
<h2>Zmeny vo verzii 11.0</h2>
<ul>
<li>Slovníky z predošlých verzií sa automaticky importujú pri aktualizácii do
novej verzie, ak nepreferujete ukladanie slovníkov do hlavného adresára s
nastaveniami NVDA.</li>
<li>V režime prehliadania sa pri popise symbolu zobrazujú aj slová znak a
popis, aby bolo možné ľahšie rozlíšiť reprezentáciu a popis symbolov.</li>
</ul>
<h2>Zmeny vo verzii 10.0</h2>
<ul>
<li>Pridané skratky na zobrazenie symbolov v režime prehliadania. Nastavujú sa
v dialógu klávesové skratky, vetva prezeranie textu.</li>
</ul>
<h2>Zmeny vo verzii 9.0</h2>
<ul>
<li>Pridaná možnosť zapnúť a vypnúť oznamovanie emotikonov.</li>
<li>Prerobené kódovanie a odstránené problémy s kódovaním.</li>
<li>Odteraz je možné preložiť popis doplnku.</li>
<li>Pridaná informácia o panely emoji v systéme Windows 10.</li>
</ul>
<h2>Zmeny vo verzii 8.0</h2>
<ul>
<li>Vyžaduje NVDA od verzie 2018.3.</li>
</ul>
<h2>Zmeny vo verzii 7.0</h2>
<ul>
<li>Dialóg s nastaveniami presunutý do nastavení NVDA.</li>
<li>Odstránené menu doplnku: Pridanie emotikonu vykonáte z menu nástroje,
slovníky sú v menu rečové slovníky.</li>
<li>Vyžaduje NVDA od verzie 2018.2.</li>
<li>Môžete si <a href="https://www.nvaccess.org/addonStore/legacy?file=emo-o">stiahnuť verziu pre NVDA 2017.3</a>.</li>
</ul>
<h2>Zmeny vo verzii 6.0</h2>
<ul>
<li>Pridaná podpora pre konfiguračné profily.</li>
<li>Od NVDA 2017.4 sa nastavenia načítavajú podľa použitého profilu. V
starších verziách je potrebné načítať pluginy (ctrl+nvda+F3).</li>
<li>Pri aktualizácii na novú verziu sa odstránia nepoužívané súbory
(emoticons.ini a emoticons.dic).</li>
</ul>
<h2>Zmeny vo verzii 5.0</h2>
<ul>
<li>Pridaná podpora emoji.</li>
<li>Do dialógu na vloženie emotikonu pridaný filter a kategórie.</li>
<li>Vyžaduje NVDA 2016.4. Pridaný modul guiHelper na zobrazenie dialógov.</li>
</ul>
<h2>Zmeny vo verzii 4.0</h2>
<ul>
<li>Nie je viac možné otvoriť dialóg na vkladanie emotikonov, ak je už
otvorený iný dialóg NVDA.</li>
</ul>
<h2>Zmeny vo verzii 3.0</h2>
<ul>
<li>v dialógu s nastavením emotikonov môžete odteraz určiť, či sa má reťazec
zmeniť len ak je ako celé slovo, alebo v ľubovoľnom kontexte (rovnako ako
v rečových slovníkoch NVDA od verzie 2014.4).</li>
</ul>
<h2>Zmeny vo verzii 2.0</h2>
<ul>
<li>Návod k doplnku môžete nájsť v správcovi doplnkov.</li>
</ul>
<h2>Zmeny vo verzii 1.1</h2>
<ul>
<li>odstránené duplicitné emotikony.</li>
<li>pridané nové emotikony.</li>
</ul>
<h2>Zmeny vo verzii 1.0</h2>
<ul>
<li>prvé vydanie.</li>
</ul>
eMulehttp://addons.nvda-project.org/addons/eMule.sk.html2024-03-10T18:42:51Z2013-08-04T11:54:04Z
<ul>
<li>Autori: Noelia, Chris, Alberto.</li>
</ul>
<p>Tento doplnok zlepšuje prístupnosť programu eMule s NVDA. Poskytuje užitočné
klávesové skratky a informácie z okien a prostredia Emule.</p>
<p>Je postavený na staršom aplikačnom module pre eMule od toho istého
autora. odporúčame vám starý aplikačný modul odstrániť, keďže majú spoločné
klávesové skratky a funkcie.</p>
<p>Tested on <a href="https://www.emule-project.net">eMule</a> 0.50a.</p>
<h2>klávesové skratky:</h2>
<ul>
<li>ctrl+shift+h: Presunie myš a fokus do hlavného panela nástrojov.</li>
<li>ctrl+shift+t: prečíta aktuálne okno.</li>
<li>ctrl+shift+n: Presunie fokus do poľa názov v okne hľadania.</li>
<li>ctrl+shift+p: Presunie fokus na zoznam parametrov alebo do editačného poľa
s možnosťami v okne hľadania.</li>
<li>ctrl+shift+b: Presunie fokus do zoznamu v aktuálnom okne. Funguje
napríklad v okne hľadania, v okne so sťahovaním a podobne.</li>
<li>ctrl+shift+o: Presunie kurzor do editačného poľa iba na čítanie. Napríklad
do okna s IRC správami, dostupnými servermi a podobne.</li>
<li>ctrl+NVDA+f: Ak ste v editačnom poli iba na čítanie, otvorí štandardné
okno hľadania, ktoré poznáte z NVDA.</li>
<li>ctrl+shift+l: presunie navigačný objekt a myš na hlavičku pre aktuálny
zoznam.</li>
<li>ctrl+shift+q: Prečíta prvý objekt na stavovom riadku; informáciu o
poslednej aktivite.</li>
<li>ctrl+shift+w: Prečíta druhý objekt na stavovom riadku; informácie o
súboroch a používateľoch na aktuálnom serveri.</li>
<li>ctrl+shift+e: prečíta tretí objekt na stavovom riadku; rýchlosť sťahovania
a posielania.</li>
<li>ctrl+shift+r: prečíta štvrtý objekt na stavovom riadku; Oznámy stav
pripájania do siete eD2K a Kad.</li>
</ul>
<h2>práca so stĺpcami.</h2>
<p>Na pohyb po riadkoch a stĺpcoch v zozname môžete použiť ctrl+alt+šípky. V
doplnku sú dostupné aj tieto skratky:</p>
<ul>
<li>nvda+ctrl+1-0: Prečíta prvých 10 stĺpcov.</li>
<li>nvda+shift+1-0: Číta stĺpce 11-20.</li>
<li>nvda+shift+C: Skopíruje posledný prečítaný stĺpec do schránky.</li>
</ul>
<h2>Changes for 7.0</h2>
<ul>
<li>Compatible with NVDA 2023.1.</li>
</ul>
<h2>Changes for 6.0</h2>
<ul>
<li>Requires NVDA 2022.1 or later.</li>
</ul>
<h2>Changes for 5.0</h2>
<ul>
<li>Compatible with NVDA 2021.1.</li>
</ul>
<h2>Zmeny vo verzii 4.0</h2>
<ul>
<li>Vyžaduje NVDA od verzie 2019.3.</li>
</ul>
<h2>Zmeny vo verzii 3.0</h2>
<ul>
<li> To search text in the readonly edit boxes, the find dialog can be used,
such as nvda+control+f to activate the find dialog.</li>
</ul>
<h2>Zmeny vo verzii 2.0</h2>
<ul>
<li> Návod k doplnku nájdete v správcovi doplnkov.</li>
</ul>
<h2>Zmeny vo verzii 1.2</h2>
<ul>
<li> Pri pohybe v IRC správach je správne oznamovaný vybratý text.</li>
<li> Skratka na prechod do výsledkov hľadania bola upravená tak, že prechádza
do akého koľvek zoznamu v aktuálnom okne.</li>
<li> Skratka na prechod k správam IRC bola upravená tak, že prechádza do
ľubovolného editačného poľa, takže je možné čítať informácie o spojení v
okne servera.</li>
<li> NVDA viac opakovane nečíta obsah panela nástrojov, ak naň presuniete
fokus alebo myš.</li>
</ul>
<h2>Zmeny vo verzii 1.1</h2>
<ul>
<li> opravená chyba v pomocníkovy Emule, ktorá sa objavovala, ak názov
priečinka s používateľskými dátami obsahoval iné ako ascii znaky.</li>
<li> Skratky sa dajú meniť v dialógu klávesové skratky.</li>
</ul>
<h2>Zmeny vo verzii 1.0</h2>
<ul>
<li> prvé vydanie.</li>
</ul>
Zvýrazňovač fokusuhttp://addons.nvda-project.org/addons/focusHighlight.sk.html2023-05-10T20:38:33Z2013-08-04T06:59:50Z
<ul>
<li>Authors: Takuya Nishimoto, Karl-Otto Rosenqvist</li>
<li>Stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=fh">Stabilná verzia</a></li>
<li>Stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=fh-dev">Vývojová verzia</a></li>
</ul>
<p>Tento doplnok umožňuje slabozrakým používateľom, vidiacim učiteľom a
vývojárom sledovať navigačný objekt alebo objekt, ktorý má fokus, pomocou
farebného obdĺžnika.</p>
<p>The following colors are used by this addon:</p>
<ul>
<li>Green thin dashed-dotted line rectangle shows NVDA is in browse mode, and
this is the navigator object.</li>
<li>Red thin rectangle shows NVDA is in browse mode, and this is the focused
object/control.</li>
<li>Red thick rectangle shows NVDA is in browse mode, and this is both the
navigator object and the focused object which are overlapping.</li>
<li>Blue thick dotted line rectangle indicates NVDA is in focus mode, i.e.,
key types are passed to the control.</li>
</ul>
<p>To toggle object tracking, press NVDA+Alt+P. You can assign other gestures
using the Input Gestures dialog. Note that it works with NVDA 2018.3 or
later. Otherwise, you should disable or uninstall the addon itself for
disabling object tracking.</p>
<p>When Focus Highlight category of NVDA Settings dialog is available,
following items can be used.</p>
<ul>
<li>Make focus mode the default: This checkbox is enabled by default. When it
is unchecked, this add-on behaves same as version 5.6 or previous
versions, i.e., if browse mode is not available for an app, the focus is
shown using the thick red rectangle.</li>
<li><p>Focus in focus mode, Focus in browse mode, Navigator object: Each of these
groups contains Color, Thickness, and Style.</p>
<ul>
<li>Color: This edit field allows you to type the HTML color code, i.e.,
six-character hexadecimal number. For example, "ffffff" is white,
"ff0000" is red, and so on. Note that "000000" can not be used.</li>
<li>Thickness: This edit field allows you to type the thickness of the
box. You can enter a value between 1 and 30.</li>
<li>Style: The choices are Solid, Dash, Dot, Dash dot, and Dash dot-dot.</li>
</ul>
</li>
<li><p>Restore defaults: This button allows you to reset your settings to their
original defaults.</p></li>
</ul>
<h2>Changes for 6.3</h2>
<ul>
<li>New and updated translations.</li>
<li>Fixed the issue that dash styles of focus (in browse mode) and navigator
object are not able to change.</li>
<li>Fixed the issue that 'Cancel' button of setting panel does not work after
'Restore defaults' button is pressed.</li>
</ul>
<h2>Changes for 6.2</h2>
<ul>
<li>New and updated translations.</li>
<li>You can now turn object tracking on and off using NVDA+Alt+P. Karl-Otto
Rosenqvist contributed for this.</li>
</ul>
<h2>Changes for 6.1</h2>
<ul>
<li>New and updated translations.</li>
<li>Addresses <a href="https://github.com/nvdajp/focusHighlight/issues/14">the issue</a>
with the latest development versions of NVDA.</li>
<li>Focus Highlight category of NVDA Settings dialog is now available. Note
that it works only with NVDA 2018.3 or later.</li>
<li><a href="https://github.com/nvdajp/focusHighlight/issues/3">Discussions regarding customizing
colors</a></li>
<li><a href="https://github.com/nvdajp/focusHighlight/issues/13">Discussions regarding 'Make focus mode the
default'</a></li>
</ul>
<h2>Changes for 6.0</h2>
<ul>
<li>New and updated translations.</li>
<li>Addresses <a href="https://github.com/nvdajp/focusHighlight/issues/13">the issue</a>
regarding the browse mode.</li>
<li>Since this version, if the browse mode of NVDA is not available for an
application, it is always shown that NVDA is in focus mode for the
application, rather than using the red thick rectangle.</li>
<li>The thickness of the line representing the focus mode has been reduced to
half.</li>
</ul>
<h2>Changes for 5.6</h2>
<ul>
<li>New and updated translations.</li>
<li>Addresses the compatibility issue with NVDA snapshot alpha-16682.</li>
</ul>
<h2>Changes for 5.5</h2>
<ul>
<li>Addresses the issue with NVDA 2018.4 and Firefox/Chrome web browsers.</li>
</ul>
<h2>Changes for 5.4</h2>
<ul>
<li>New and updated translations.</li>
<li>Addresses <a href="https://github.com/nvdajp/focusHighlight/issues/11">the issue</a>
regarding version compatibility.</li>
</ul>
<h2>Changes for 5.3</h2>
<ul>
<li>New and updated translations.</li>
<li>Addresses <a href="https://github.com/nvdajp/focusHighlight/issues/10">the issue</a>
regarding Chrome browser and application sleep mode.</li>
</ul>
<h2>Changes for 5.2</h2>
<ul>
<li>New and updated translations.</li>
</ul>
<h2>Changes for 5.1</h2>
<ul>
<li>Removed debug log output.</li>
</ul>
<h2>Changes for 5.0</h2>
<ul>
<li>Indicators of navigator object and focus mode were changed.</li>
<li>Multiple monitors are supported.</li>
<li>It now uses GDI Plus technology for drawing.</li>
</ul>
<h2>Changes for 4.0</h2>
<ul>
<li>Hide rectangle if current application is in sleep mode.</li>
</ul>
<h2>Changes for 3.0</h2>
<ul>
<li>Fixed issue regarding expanded combo box.</li>
<li>Fixed issue with Windows Task Manager.</li>
<li>Ability to indicate the focus mode.</li>
</ul>
<h2>Changes for 2.1</h2>
<ul>
<li>New and updated translations.</li>
</ul>
<h2>Zmeny vo verzii 2.0</h2>
<ul>
<li>Návod k doplnku nájdete v správcovi doplnkov.</li>
</ul>
<h2>Zmeny vo verzii 1.1</h2>
<ul>
<li>Zmenený obdĺžnik navigačného objektu na prerušovanú čiaru.</li>
<li>Opravená chyba, ktorá sa vyskytovala pri opätovnom načítaní doplnkov.</li>
</ul>
<h2>Zmeny vo verzii 1.0</h2>
<ul>
<li>Opravené chyby s navigačným objektom v programoch MS Internet Explorer 8 a
Skype</li>
<li>Prvé vydanie.</li>
</ul>
Režim reči bez pípaniahttp://addons.nvda-project.org/addons/noBeepsSpeechMode.sk.html2023-08-14T13:52:29Z2013-07-16T07:37:13Z
<ul>
<li> Autor: Alberto Buffolino.</li>
<li> Stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=noBeepsSpeechMode">stabilnú verziu</a></li>
<li> Stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=noBeepsSpeechMode-dev">vývojovú verziu</a></li>
</ul>
<p>Tento doplnok odstráni pípanie z množiny dostupných režimov reči, takže po
stlačení nvda+s bude možné prepínať len medzi režimami reč a ticho.</p>
<h2>zmeny vo verzii 2.0</h2>
<ul>
<li> Návod k doplnku nájdete v správcovi doplnkov.</li>
</ul>
<h2>zmeny vo verzii 1.5</h2>
<ul>
<li> Pridaná kategória reč pre skript v dialógu klávesové skratky.</li>
<li> Skontroluje, či nie je nainštalovaná staršia verzia doplnku a navrhne jej
odinštaláciu.</li>
</ul>
<h2>zmeny vo verzii 1.4</h2>
<ul>
<li> od tejto verzie sú správy o stave reči prekladané automaticky zo správ
NVDA, takže doplnok nevyžaduje špeciálny preklad (výnimku tvorí manyfest
súbor a odkaz na návod)</li>
</ul>
<h2>zmeny vo verzii 1.3</h2>
<ul>
<li> opravená chyba v prekladoch: Upravené python kódy na podporu prekladu.</li>
</ul>
<h2>zmeny vo verzii 1.2</h2>
<ul>
<li> prvé vydanie.</li>
</ul>
Virtualizácia oknahttp://addons.nvda-project.org/addons/virtualRevision.sk.html2023-05-10T20:38:33Z2013-07-07T12:36:48Z
<ul>
<li>Autori: Rui Batista a tím NVDA</li>
<li>Stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=virtualRevision">stabilnú verziu</a></li>
<li>Funguje od verzie NVDA 2019.3</li>
</ul>
<p>Doplnok umožňuje zobraziť obsah okna v jednoduchom textovom poli rovnako,
ako funkcia virtualizácia oknaprogramu JAWS pre Windows. Upozorňujeme však,
že ide len o zjednodušenie pre používateľov a tento doplnok nenahrádza
funkcie režim prezerania a objektovú navigáciu NVDA.</p>
<h2>použitie</h2>
<p>Okno virtualizujete skratkou ctrl+nvda+w. Po texte sa pohybujte tak, ako v
ostatných editačných poliach. Okno zavriete klávesom escape.</p>
<h2>Zmeny vo verzii 3.0</h2>
<ul>
<li>Vyžaduje NVDA od verzie 2019.3</li>
</ul>
<h2>Zmeny vo verzii 2.3</h2>
<ul>
<li>Interné zmeny na podporu novších vydaní NVDA</li>
</ul>
<h2>Zmeny vo verzii 2.2</h2>
<ul>
<li>NVDA zaznamená, ak je okno minimalizované, alebo nemá názov.</li>
</ul>
<h2>Zmeny vo verzii 2.1</h2>
<ul>
<li>NVDA oznamuje aj názov obrazovky vo virtuálnom zobrazení.</li>
<li>Je možné virtuálne zobraziť okná navrhnuté v prostredí UWP (Universal
Windows app). Ide o moderné aplikácie pre Windows od verzie 8.</li>
<li>NVDA pípnutím oznamuje, že sa dokončilo virtualizovanie okna v prostredí
modernej aplikácie.</li>
</ul>
<h2>Zmeny vo verzii 2.0</h2>
<ul>
<li>Nový názov (len v angličtine)</li>
<li>Vyžaduje sa NVDA od verzie 2015.2</li>
<li>Odteraz je vďaka novým funkciám v NVDA 2015.2 možné vo virtuálnom okne
vyhľadávať.</li>
<li>opravené zobrazenie okien konzololvých prostredí.</li>
<li>Odstránené zbytočné prázdne riadky v zobrazení konzllových aplikácii.</li>
<li>Ďalšie malé úpravy.</li>
<li>Aktualizované preklady.</li>
</ul>
<h2>Zmeny vo verzii 1.2</h2>
<ul>
<li>Podpora pre virtualizáciu okna príkazového riadku</li>
</ul>
<h2>Zmeny vo verzii 1.1</h2>
<ul>
<li>Vytvorenie štandardného doplnku NVDA.</li>
</ul>
<h2>Zmeny vo verzii 1.0</h2>
<ul>
<li>prvé vydanie</li>
</ul>
Záložkyhttp://addons.nvda-project.org/addons/placeMarkers.sk.html2024-03-10T18:13:35Z2013-06-04T20:10:52Z
<ul>
<li>Autori): Noelia, Chris.</li>
</ul>
<p>This add-on is used for saving and searching specific text strings or
placemarkers. It can be used on web pages or documents in NVDA's browse
mode. It can also be used for saving or searching strings of text in
multi-line controls; in this case, if it's not possible to update the caret,
the corresponding string will be copied to the clipboard, so that it can be
searched using other tools. The plugin saves the specified strings and
placemarkers to files whose name is based on the title and URL of the
current document. This add-on is based on SpecificSearch and
Bookmark&Search, developed by the same author. You should uninstall them to
use this one, since they have common keystrokes and features.</p>
<h2>Klávesové skratky:</h2>
<ul>
<li>ctrl+shift+NVDA+f: Otvorí dialóg hľadania a zobrazí naposledy hľadané
reťazce. Zo zoznamu môžete vybrať reťazce, ktoré ste už hľadali. Takisto
môžete vybraté reťazce odstrániťz histórie začiarknutím príslušného
políčka. Takisto môžete určiť, či aktuálny reťazec hľadania chcete uložiť
na neskoršie použitie. V tomto okne môžete tiež určiť smer hľadania
(hľadať predchádzajúce, hľadať nasledujúce), prípadne nehľadať
vôbec. Takisto môžete začiarknuť rozlišovanie malých a veľkých
písmen. Hľadanie spustíte tlačidlom OK.</li>
<li>control+shift+NVDA+y: Saves the current position as a placemarker. If you
want to provide a name for this placemarker, select some text from this
position before saving it.</li>
<li>control+shift+NVDA+delete: Deletes the placemarker corresponding to this
position.</li>
<li>NVDA+y: Moves to the next placemarker.</li>
<li>shift+NVDA+y: Moves to the previous placemarker.</li>
<li>Not assigned: Shows the file name where the placemarkers data will be
saved in browse mode, without an extension.</li>
<li>alt+NVDA+y: Opens a dialog with the placemarkers saved for this
document. You can write a note for each placemarker; press Save note to
save changes. Pressing Delete you can remove the selected
placemarker. Pressing OK you can move to the selected position.</li>
<li>Not assigned: Saves a position as a temporary placemarker.</li>
<li>Not assigned: Moves to the temporary placemarker for the current document.</li>
<li>Nedefinované: Nájde nasledujúci výskyt posledného hľadaného reťazca v
dokumente.</li>
<li>Nedefinované: Nájde predchádzajúci výskyt posledného hľadaného reťazca v
dokumente.</li>
</ul>
<h2>PlaceMarkers Submenu (NVDA+N)</h2>
<p>Using the PlaceMarkers submenu under NVDA's Preferences menu, you can
access:</p>
<ul>
<li>Specific search folder: Opens a folder of specific searches previously
saved.</li>
<li>Bookmarks folder: Opens a folder of the saved placemarkers.</li>
<li>Copy placeMarkers folder: You can save a copy of the placeMarkers folder.</li>
<li>Restore placeMarkers: You can restore your placeMarkers from a previously
saved placeMarkers folder.</li>
</ul>
<p>Note: The placemarker position is based on the number of characters; and
therefore in dynamic pages it is better to use the specific search, not
placemarkers.</p>
<h2>Changes for 35.0</h2>
<ul>
<li>Removed URL parameters from file names, so that bookmarks are valid for
specific websites in different sessions.</li>
</ul>
<h2>Changes for 24.0</h2>
<ul>
<li>Y is used instead of k in gestures such as NVDA+k, NVDA+shift+k,
NVDA+alt+k and NVDA+control+shift+k.</li>
<li>Compatible with NVDA 2023.1.</li>
</ul>
<h2>Changes for 23.0</h2>
<ul>
<li>The add-on works again with Microsoft Word.</li>
</ul>
<h2>Changes for 22.0</h2>
<ul>
<li>We can move to bookmarks and delete them with UIA enabled, thanks to
Abdel.</li>
</ul>
<h2>Changes for 21.0</h2>
<ul>
<li>Bookmarks can be saved with UIA enabled in browsers based on Chromium,
thanks to Abdel.</li>
</ul>
<h2>Changes for 20.0</h2>
<ul>
<li>Requires NVDA 2022.1 or later.</li>
</ul>
<h2>Changes for 19.0</h2>
<ul>
<li>The add-on cannot be run on secure screens.</li>
</ul>
<h2>Changes for 18.0</h2>
<ul>
<li>The command to see the path for placeMarkers shows if there are permanent
bookmarks, text for specific search or a temporary bookmark for the
current document.</li>
</ul>
<h2>Changes for 17.0</h2>
<ul>
<li>Fixed a bug which didn't allow to save place markers in some documents.</li>
<li>Fixed translated strings making translations to work properly.</li>
</ul>
<h2>Changes for 16.0</h2>
<ul>
<li>Compatible with NVDA 2021.1 or later (required).</li>
<li>Skim reading is supported when moving to temporary bookmarks.</li>
<li>If needed, you can download <a href="https://github.com/nvdaes/placeMarkers/releases">other
versions</a>.</li>
</ul>
<h2>Changes for 15.0</h2>
<ul>
<li>When reading with say all in browse mode, the specific find next and
specific find previous commands do not stop reading anymore if Allow skim
reading option is enabled, according to find next and find previous
commands from NVDA 2020.4.</li>
<li>When the Specific search dialog is opened after running the Specific find
previous command, the Search previous option will be selected.</li>
</ul>
<h2>Zmeny vo verzii 14.0</h2>
<ul>
<li>Namiesto kopírovania názvu súboru do schránky sa teraz názov zobrazí v
režime prehliadania. Funkcia nemá priradenú klávesovú skratku.</li>
<li>Políčka hľadanie a história sa viac neprekrývajú (opravil Cyrille Bougot).</li>
<li>Vyžaduje NVDA od verzie 2019.3.</li>
</ul>
<h2>Zmeny vo verzii 13.0</h2>
<ul>
<li>Pridané funkcie na vyhľadanie predchádzajúceho a nasledujúceho výskytu
hľadaného reťazca. Skratky je potrebné nastaviť ručne.</li>
<li>Vyhľadávanie funguje aj vtedy, ak je otvorený dialóg O NVDA.</li>
<li>Políčko rozlišovať malé a veľké písmená sa začiarkne, ak bolo začiarknuté
pri poslednom hľadaní.</li>
<li>Pri aktualizácii sa aktualizujú a presunú aj adresáre so záložkami, pričom
stále je možné ponechať súbory aj v hlavnom adresári NVDA.</li>
<li>Pri zálohovaní sa vytvorí priečinok placeMarkersBackup a do neho sa
skopírujú príslušné súbory, abysa zabránilo nechcenému odstráneniu súborov
a priečinkou s dátami. Toto sa deje len v prípade, ak už vybratý priečinok
nemá názov placeMarkersBackup.</li>
</ul>
<h2>Zmeny vo verzii 12.0</h2>
<ul>
<li>NVDA viac nepadá pri vybratí čínskych znakov a následnom pokuse napísať
poznámku k záložke.</li>
</ul>
<h2>Zmeny vo verzii 11.0</h2>
<ul>
<li>Vyžaduje NVDA od verzie 2018.3.</li>
<li>Môžete si stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=pm-o">Verziu pre NVDA 2017.3</a>.</li>
</ul>
<h2>Zmeny vo verzii 10.0</h2>
<ul>
<li>V aplikácii MS edge sú skratky NVDA+k, NVDA+shift+k alebo NVDA+alt+k
odosielané aj do aplikácie, aby nedochádzalo k chybám, hlavne pri dlhých
dokumentoch.</li>
<li>Špecifické hľadanie funguje aj v aplikácii Edge.</li>
</ul>
<h2>Zmeny vo verzii 9.0</h2>
<ul>
<li>Prezerací kurzor sleduje systémový kurzor pri aktivovaní záložky z
dialógu.</li>
<li>Opravené fungovanie prechodu na predchádzajúcu záložku.</li>
<li>Záložky je možné odstrániť z dialógu s poznámkami.</li>
<li>Odteraz je možné nastaviť skratky pre uloženie a aktivovanie dočasnej
záložky.</li>
</ul>
<h2>Zmeny vo verzii 8.0</h2>
<ul>
<li>odstránená identifikácia fragmentov z názvov súborov pre záložky, keďže
toto spôsobovalo problémy v programe VitalSource Bookshelf ePUB reader.</li>
<li>Pridaný dialóg, v ktorom je možné k záložkám písať poznámky a tiež
presunúť kurzor na vybratú záložku.</li>
</ul>
<h2>Zmeny vo verzii 7.0</h2>
<ul>
<li>Dialóg s uložením špecifického textu hľadania bol nahradený novým. Tu je
možné určiť presné parametre hľadania.</li>
<li>Upravený vzhľad dialógov.</li>
<li>Vyhľadanie predchádzajúceho alebo nasledujúceho výskytu rešpektuje
nastavenie rozlišovania malých a veľkých písmen.</li>
<li>Vyžaduje NVDA od verzie 2016.4.</li>
<li>Pridaná možnosť nastaviť skratky na zálohu a obnovenie záložiek.</li>
<li>NVDA upozorní po dokončení obnovi alebo zálohy záložiek.</li>
</ul>
<h2>Zmeny vo verzii 6.0</h2>
<ul>
<li>Ak nie sú dostupné funkcie doplnku, doplnok odošle skratky do aktuálneho
otvoreného okna príslušnej aplikácie.</li>
</ul>
<h2>Zmeny vo verzii 5.0</h2>
<ul>
<li>pridané hľadanie s rozlišovaním malých a veľkých písmen.</li>
<li>odstránená položka na otvorenie návodu z menu doplnku.</li>
<li>Prepracované klávesové skratky.</li>
</ul>
<h2>Zmeny vo verzii 4.0</h2>
<ul>
<li>odstránená identifikácia fragmentov z názvov súborov pre záložky, keďže
toto spôsobovalo problémy v doplnku ePUBREADER pre Firefox.</li>
<li>Návod k doplnku nájdete v správcovi doplnkov.</li>
</ul>
<h2>Zmeny vo verzii 3.1</h2>
<ul>
<li>aktualizované a doplnené preklady.</li>
<li>Pozícia záložky nie je oznamovaná počas rýchleho čítania.</li>
</ul>
<h2>Zmeny vo verzii 3.0</h2>
<ul>
<li>pridaná podpora pre rýchle čítanie</li>
</ul>
<h2>Zmeny vo verzii 2.0</h2>
<ul>
<li>pridaná možnosť uložiť rôzne reťazce hľadania pre rôzne dokumenty.</li>
<li>opravená chyba, ktorá sa vyskytovala, ak cesta neobsahovala len ascii
znaky.</li>
<li>Skratky môžete zmeniť v nastaveniach klávesových skratiek NVDA.</li>
</ul>
<h2>Zmeny vo verzii 1.0</h2>
<ul>
<li>prvé vydanie</li>
<li>Pridané jazyky: Brazílska portugalčina, fínčina, francúzština,
galícijčina, nemčina, taliančina, japončina, kórejčina, nepálčina,
Perzština, Portugalčina, španielčina, slovenčina, slovinčina, Tamilčina.</li>
</ul>
Pomoc pre prácu s prvkamihttp://addons.nvda-project.org/addons/controlUsageAssistant.sk.html2024-03-24T15:56:56Z2013-05-10T07:46:45Z
<ul>
<li>Author: Joseph Lee, Noelia Ruiz Martínez</li>
</ul>
<p>Doplnok poskytuje pomoc pre aktuálne zameraný prvok. Aby ste počuli pomocné
hlásenie pre prvky, akými sú napríklad začiarkavacie alebo editačné polia ,
stlačte NVDA+h.</p>
<p>Go to NVDA's menu, Preferences submenu, Settings dialog, Control Usage
Asistant category to configure add-on settings:</p>
<ul>
<li>Automatic messages for focus: Checked by default.</li>
<li>Type the message to be used when an object can be activated: You may
include a short message indicating the default or your configured gesture
to know if the current object has an associated action when pressing a
gesture like NVDA+enter in object navigation.</li>
<li>Select output modes for automatic messages: This list of checkboxes allows
to select speech and braille.</li>
<li>Pitch change for automatic messages: This spin box allows to set the pitch
change when NVDA reads automatic messages (from -30 to +30).</li>
</ul>
<h2>Version 20240324.0.0</h2>
<ul>
<li>Improved support for edit controls and suggestions.</li>
</ul>
<h2>Version 2023.02.19</h2>
<ul>
<li>The message configured for clickable objects will be reported after other
properties.</li>
<li>Compatible with NVDA 2023.1.</li>
</ul>
<h2>Version 2022.07.10</h2>
<ul>
<li>Added ability to set a message for object navigation, to announce if the
current object can be activated.</li>
</ul>
<h2>Version 2022.03.27</h2>
<ul>
<li>Requires NVDA 2022.1 or later.</li>
</ul>
<h2>Version 22.01</h2>
<ul>
<li>Added support for automatic messages.</li>
<li>Improved support for requested messages in browse mode.</li>
</ul>
<h2>Version 21.10</h2>
<ul>
<li>NVDA 2021.2 or later is required due to changes to NVDA that affects this
add-on.</li>
</ul>
<h2>Version 20.10</h2>
<ul>
<li>Help messages are announced in languages other than English.</li>
</ul>
<h2>Verzia 20.06</h2>
<ul>
<li>Opravené drobné chyby v kóde.</li>
<li>NVDA will no longer appear to do nothing or play error tones when trying
to obtain help for certain browse mode controls.</li>
</ul>
<h2>Verzia 20.01</h2>
<ul>
<li>Vyžaduje sa NVDA od verzie 2019.3.</li>
</ul>
<h2>Verzia 3.0/19.11</h2>
<ul>
<li>Číslo verzie je odteraz rok.mesiac.</li>
<li>Skratka nvda+H zobrazí okno a nie len notifikáciu.</li>
</ul>
<h2>Verzia 2.5</h2>
<ul>
<li>Kompatibilná s Python 3.</li>
</ul>
<h2>Verzia 2.1</h2>
<ul>
<li>Nové a aktualizované preklady.</li>
</ul>
<h2>Verzia 2.0</h2>
<ul>
<li>pridané pomocné správy pre ďalšie prvky vrátane konzolových aplikácií.</li>
<li>Pridané pomocné správy pre ďalšie časti v aplikáciách Microsoft Excel a
Powerpoint a prihlasovacia obrazovka Windows 8.</li>
<li>Pridané pomocné správy pre prácu s formulármi v režime fokusu a režime
prehliadania v dokumentoch (Internet Explorer, Adobe Reader, Mozilla
Firefox, atď.).</li>
<li>pridaný dánsky preklad.</li>
</ul>
<h2>Verzia 1.0</h2>
<ul>
<li>Prvé vydanie</li>
</ul>
Monitor prostriedkovhttp://addons.nvda-project.org/addons/resourceMonitor.sk.html2024-03-23T17:00:30Z2013-03-03T14:32:05Z
<ul>
<li>Authors: Alex Hall, Joseph Lee, Kefas Lungu, Beqa Gozalishvili, Tuukka
Ojala, Ethin Probst and other NVDA contributors</li>
<li>Stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=resourceMonitor">stabilnú verziu</a></li>
<li>NVDA compatibility: 2022.4 and later</li>
</ul>
<p>Poskytuje informácie o zaťažení procesora, stave pamäte a o iných zdrojoch.</p>
<h1>Klávesové skratky</h1>
<p>All commands support speech on demand mode (NVDA 2024.1 and later).</p>
<ul>
<li>NVDA+Shift+E: oznámy využitie pamäte ram, priemerné zaťaženie procesora a
stav batérie, ak je dostupná.</li>
<li>NVDA+Shift+1: oznámy vyťaženie procesora a jednotlivých jadier.</li>
<li>NVDA+Shift+2/5: Oznámi využitú a celkovú fyzickú a virtuálnu pamäť.</li>
<li>NVDA+Shift+3: Oznámi využité a celkové miesto pre pevné a pamäťové disky
pripojené k počítaču.</li>
<li>NVDA+Shift+4: oznámy stav batérie v percentách, stav napájania,
zostávajúci čas (ak sa vybíja) a prípadne upozornenie ak je batéria vybytá
alebo v kritickom stave.</li>
<li>NVDA+Shift+6: presents CPU Architecture and Windows version and service
pack numbers.</li>
<li>Nvda+shift+7: Oznámi čas behu systému od posledného reštartu.</li>
<li>NVDA+Shift+8: presents information on the wireless connection, ssid name
and strength, or no ssid if there is none available.</li>
</ul>
<p>You can change these shortcut keys via input gestures dialog.</p>
<h2>Všimnite si</h2>
<p>Tento doplnok nie je náhradou za správcu úloh a iné programy na zisťovanie
informácií v systéme Windows. Vezmite preto navedomie tieto skutočnosti:</p>
<ul>
<li>Resource information cannot be copied to clipboard if running the add-on
in secure screens.</li>
<li>CPU usage is given for logical processors, not physical cores. This is
noticeable for processors which uses Hyper-Threading where number of CPU's
is twice the number of CPU cores. On some newer computers, not all CPU
cores will have hyper-threading enabled.</li>
<li>Ak práve kopírujete veľké súbory, zistenie informácie o využití disku môže
chvíľu trvať.</li>
<li>When announcing processor architecture information, "x86" and "AMD64"
refer to 32-bit and 64-bit (x64) Intel and AMD processors, respectively.</li>
<li>This add-on requires Windows 10 or later.</li>
</ul>
<p>Note on license: this add-on uses Psutil, licensed under 3-Clause BSD
License which is compatible with GNU General Public License.</p>
<h2>Version 24.04</h2>
<ul>
<li>Updated psutil dependency to 5.9.8.</li>
<li>Added support for speech on demand mode so resource information can be
announced in this mode.</li>
</ul>
<h2>Version 23.11</h2>
<ul>
<li>Downgraded psutil dependency to 5.9.4 due to problems with memory usage
announcements.</li>
</ul>
<h2>Version 23.10</h2>
<ul>
<li>Updated psutil dependency to 5.9.5.</li>
</ul>
<h2>Version 23.09</h2>
<ul>
<li>NVDA will no longer log startup error messages on Windows Server systems
when wireless capability modules are unavailable.</li>
</ul>
<h2>Version 23.06</h2>
<ul>
<li>Situation where resourceMonitor doesn't work properly due to
unavailability of wireless adapters has been fixed.</li>
</ul>
<h2>Version 23.05.1</h2>
<p>wlanReporter NVDA-addon is now part of resourceMonitor!</p>
<ul>
<li><p>The old way of checking for wireless connections has been replaced by the
windows API from wlanReporter: https://github.com/kvark128/WlanReporter/ .</p>
<ul>
<li>After speaking SSID name and strength, NVDA will also now tell you the
security type of your network.</li>
<li>NVDA will now alert you when you connect and disconnect from a wireless
network.</li>
<li>NVDA will now alert you when wireless connections is turned on or off.</li>
</ul>
</li>
</ul>
<h2>Version 23.05</h2>
<ul>
<li><p>added the ability to detect and present the state of the connected
wireless network.</p>
<ul>
<li>Announces the name of the connected wireless SSID.</li>
<li>Announces the strength of the ssid</li>
<li>Announce SSID not found if None is detected.</li>
</ul>
</li>
</ul>
<h2>Version 23.02</h2>
<ul>
<li>NVDA 2022.4 or later is required.</li>
<li>Windows 10 21H2 (November 2021 Update/build 19044) or later is required.</li>
</ul>
<h2>Version 23.01</h2>
<ul>
<li>NVDA 2022.3 or later is required.</li>
<li>Windows 10 or later is required as Windows 7, 8, and 8.1 are no longer
supported by Microsoft as of January 2023.</li>
<li>Updated psutil dependency to 5.9.4.</li>
<li>NVDA will announce actual processor architecture (x86/AMD64/ARM64) as part
of Windows version information.</li>
<li>On single-core systems, NVDA will no longer announce CPU core load as
average CPU load is the same as core load.</li>
</ul>
<h2>Version 22.03</h2>
<p>Version 22.03 is the last stable version to support Windows 7 Service Pack
1, 8, and 8.1.</p>
<ul>
<li>NVDA 2021.3 or later is required.</li>
<li>A warning message will be displayed when attempting to install the add-on
on Windows 7, 8, and 8.1.</li>
<li>Updated psutil dependency to 5.9.0.</li>
</ul>
<h2>Version 22.01</h2>
<ul>
<li>NVDA 2021.2 or later is required.</li>
</ul>
<h2>Version 21.10</h2>
<ul>
<li>NVDA 2021.1 or later is required due to changes to NVDA that affects this
add-on.</li>
</ul>
<h2>Version 21.08</h2>
<ul>
<li>Minimum Windows release requirement is now tied to NVDA releases.</li>
<li>Windows builds 20348 and 22000 are recognized as Windows Server 2022 and
Windows 11, respectively.</li>
<li>On Insider Preview builds, Windows release such as "Windows 10" will not
be used. Instead NvDA will announce "Windows Insider".</li>
<li>On 64-bit systems, processor architecture (x64 or ARM64) will be announced
as part of Windows version information.</li>
</ul>
<h2>Version 21.04</h2>
<ul>
<li>NVDA 2020.4 or later is required.</li>
<li>Updated psutil dependency to 5.8.0.</li>
<li>When pressing add-on commands twice to copy resource information to
clipboard, NVDA will announce resource summary that is being copied.</li>
</ul>
<h2>Version 21.01</h2>
<ul>
<li>Updated psutil dependency to 5.7.3.</li>
<li>Shortened Windows version message.</li>
<li>On Windows 8.1, build.revision will be announced as part of Windows
version message, similar to Windows 10.</li>
</ul>
<h2>Verzia 20.09</h2>
<ul>
<li>Čas od posledného reštartovania je hlásený v tvare dni, hodiny, minúty,
sekundy.</li>
<li>Odteraz sú správne rozpoznané náhľady verzie Windows server insider.</li>
</ul>
<h2>Verzia 20.07</h2>
<ul>
<li>Pri zisťovaní verzie Windows (NVDA+Shift+6) je správne rozpoznaná verzia
Windows 10 20H2.</li>
<li>Skrátené zobrazenie verzie Windows.</li>
</ul>
<h2>Verzia 20.06</h2>
<ul>
<li>Opravené drobné chyby v kóde.</li>
</ul>
<h2>Verzia 20.04</h2>
<ul>
<li>Aktualizované knižnice psutil na verziu 5.7.0.</li>
</ul>
<h2>Verzia 20.01</h2>
<ul>
<li>Keďže doplnok vyžaduje Python 3, Vyžaduje sa NVDA od verzie2019.3</li>
</ul>
<h2>Verzia 19.11</h2>
<ul>
<li>Vylepšená detekcia verzii Windows insider, hlavne od verzie 20H1.</li>
</ul>
<h2>Verzia 19.07</h2>
<ul>
<li>Aktualizované knižnice psutil na verziu 5.6.3.</li>
<li>Interné zmeny oznamovania stavu batérie.</li>
</ul>
<h2>Verzia 18.12</h2>
<ul>
<li>Interné zmeny ako príprava na nové verzie NVDA.</li>
</ul>
<h2>Verzia 18.10</h2>
<ul>
<li>Kód upravený na Python 3.</li>
<li>Aktualizovaná knižnica psutil na verziu 5.4.7.</li>
<li>NVDA viac nevypíše chybu, ak sa pokúsite zistiť využitie disku a máte viac
ako petabitový disk.</li>
<li>Hodnoty pre kapacitu disku a pamäť sú interpretované s presnosťou na dve
miesta (nie 4,0 ale 4,00).</li>
<li>Zlepšené zisťovanie verzii Windows insider.</li>
</ul>
<h2>Verzia 18.04</h2>
<p>Verzia 18.04.x je posledná, ktorá podporuje systémy staršie ako Windows 7
Servicepack1.</p>
<ul>
<li>Posledná verzia, ktorá podporuje Windows Server 2003, Vista a Server 2008.</li>
<li>Vylepšená detekcia verzií Windows 10 vrátane rozlišovania medzi verejnými
a testovacími verziami.</li>
</ul>
<h2>Verzia 17.12</h2>
<ul>
<li>Pridaná podpora pre 64-bitové ARM procesory v systéme Windows 10.</li>
</ul>
<h2>Version 17.09</h2>
<p>Dôležité: Verzia 17.09.x je posledná, ktorá podporuje Windows XP.</p>
<ul>
<li>Posledná verzia, ktorá funguje so systémom Windows XP.</li>
<li>Windows 10 od verzie 16278 je rozpoznaný ako Verzia 1709. Mierne upravená
verzia tohto doplnku bude vydaná po vydaní verejnej stabilnej verzie
Windowsu 1709.</li>
</ul>
<h2>Verzia 17.07.1</h2>
<ul>
<li>Obnovená podpora pre Windows XP (nebola dostupná od verzie 17.02)</li>
</ul>
<h2>Verzia 17.05</h2>
<ul>
<li>Pridaná možnosť zistiť čas behu systému od posledného reštartu
(nvda+shift+7).</li>
</ul>
<h2>Verzia 17.02</h2>
<ul>
<li>Aktualizovaná knižnica psutil na verziu 5.0.1.</li>
<li>NVDA viac nezobrazí chybu, ak pri kontrole kapacity disku nie je možné
načítať všetky externé disky (napríklad pamäťovú kartu, ktorá aktuálne nie
je vložená).</li>
</ul>
<h2>Verzia 16.08</h2>
<p>Od verzie 16.08 používame na číslovanie verzii systém rok.mesiac.</p>
<ul>
<li>Doplnok dokáže rozpoznať rôzne verzie Windows 10 (napríklad 1607 pre
zostavu 14393).</li>
<li>Správne sú rozpoznané zostavy Windows 10 po inštalácii kumulatívnych
aktualizácii (napríklad 14393.51).</li>
<li>Doplnok upozorňuje, ak používate vývojové verzie Windows (program
Insider).</li>
</ul>
<h2>Zmeny vo verzii 4.5</h2>
<ul>
<li>Doplnok presunutý na GitHub (https://github.com/josephsl/resourcemonitor).</li>
<li>Správne je rozpoznávaný Windows server 2016.</li>
</ul>
<h2>Zmeny vo verzii 4.0</h2>
<ul>
<li>Aktualizovaná knižnica psutil na verziu 2.2.1.</li>
<li>Upravené zisťovanie zaťaženia procesora.</li>
<li>Pridaná podpora pre rozpoznávanie Windows 10.</li>
<li>V systéme Windows 10 je oznamované aj číslo zostavi.</li>
<li>Pomocníka k doplnku nájdete v správcovi doplnkov.</li>
</ul>
<h2>Zmeny vo verzii 3.1</h2>
<ul>
<li>Resource monitor oficiálne podporuje Windows 8.1</li>
<li>Aktualizované preklady.</li>
</ul>
<h2>Zmeny vo verzii 3.0</h2>
<ul>
<li>Aktualizovaná knižnica psutil na verziu 1.2.1.</li>
<li>Oznamovanie architektúri procesora (32 alebo 64 bit), verzie windows a
Service Packu ((NVDA+Shift+6).</li>
<li>Možnosť zmeniť klávesové skratky (NVDA 2013 a vyššie).</li>
<li>Možnosť kopírovať údaje do schránky dvojitým stlačením danej skratky.</li>
</ul>
<h2>Zmeny vo verzii 2.4</h2>
<ul>
<li>Nové jazyky: Ukrajinčina, zjednodušená Čínština</li>
<li>Aktualizované preklady.</li>
</ul>
<h2>Zmeny vo verzii 2.3</h2>
<ul>
<li>pridaný preklad do bulharčiny</li>
</ul>
<h2>Zmeny vo verzii 2.2</h2>
<ul>
<li>Pridané preklady: Arabčina, Aragónčina, chorvátčina, holandčina, fínčina,
francúzština, Galijcíjčina, nemčina, maďarčina, taliančina, japončina,
kórejčina, nepálčina, poľština, brazílska portugalčina, ruština,
slovenčina, slovinčina, španielčina, Tamilčina a turečtina.</li>
</ul>
<h2>Zmeny vo verzii 2.1</h2>
<ul>
<li>Aktualizovaná knižnica psutil na verziu 0.6.1.</li>
<li>Skrátený čas na zistenie kapacity a miesta na diskoch.</li>
<li>drobné úpravy v kóde.</li>
</ul>
<h2>Zmeny vo verzii 2.0</h2>
<ul>
<li>Podpora pre preklady vrátane komentárov pre prekladateľov.</li>
</ul>
<h2>Zmeny vo verzii 1.0</h2>
<ul>
<li>prvé vydanie</li>
</ul>
UnicodeBrailleInputhttp://addons.nvda-project.org/addons/unicodeBrailleInput.sk.html2023-05-10T20:38:33Z2013-03-03T11:53:54Z
<ul>
<li>Autori: Mesar Hameed, Patrick Zajda, Leonard de Ruijter.</li>
<li>stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=unicodeBrailleInput">stabilnú verziu</a></li>
</ul>
<p>Tento doplnok umožňuje konvertovať text z brailu (napríklad 1345-1236-145-1)
na brailovské Unicode znaky. Takisto umožňuje konvertovať text podľa
vybratej braillovskej tabuľky.</p>
<p>Cieľom doplnku je pomôcť pri zlepšovaní liblouis tabuliek a poskytnúť
automatické jazykové testovanie. V NVDA od verzie 2017.3 je možné priamo na
vstup použiť braillovskú tabuľku unicode. Doplnok však môže byť užitočný na
konvertovanie znakov unicode pre ostatné existujúce jazykové tabuľky.</p>
<h2>použitie</h2>
<ul>
<li>Otvorte editor, ktorý vie spracovať unicode znaky (napríklad Notepad plus
plus).</li>
<li>Stlačte nvda+ctrl+u alebo aktivujte položku Unicode braille imput v menu
nástroje v NVDA.</li>
<li>Rozhodnite sa, či budete na vstup používať braillovské body
1345-1236-145-1) alebo normálny text podľa aktuálnej braillovskej tabuľky
(napríklad Slovenčina plnopis).</li>
<li>Zadajte reťazec v numerickom tvare alebo ako text.</li>
<li>Aktivujte tlačidlo OK.</li>
<li>Unicode znaky sa vložia do schránky a môžete ich prilepiť do editora.</li>
</ul>
<h2>Zmeny vo verzii 3.0</h2>
<ul>
<li>Doplnok od teraz spravuje Leonard de Ruijter.</li>
<li>Doplnok je kompatibilný s Python 3 a teda s NVDA od verzie 2019.3.</li>
<li>Pridaná možnosť vytvoriť unicode vstup zo zadaného textu podľa vybratej
tabuľky.</li>
</ul>
<h2>Zmeny vo verzii 2.0</h2>
<ul>
<li>Návod k doplnku nájdete v správcovi doplnkov.</li>
</ul>
<h2>Zmeny vo verzii 1.1</h2>
<ul>
<li>Predĺžený čas tak, aby bolo počuť celé hlásenia.</li>
<li>Nové preklady.</li>
<li>V menu pomocník pridaná dokumentácia k doplnku.</li>
<li>pridané začiarkávacie pole, po ktorého začiarknutí je možné nahradiť znak
medzera (znak 0x2800) normálnou medzerou.</li>
<li>Skratky je možné zmeniť pomocou nastavení skratiek v NVDA, pozrite strom
nástroje.</li>
</ul>
<h2>Zmeny vo verzii 1.0</h2>
<ul>
<li>prvé vydanie</li>
<li>Preklad do Francúzštiny</li>
</ul>
Rýchly prekladačhttp://addons.nvda-project.org/addons/instantTranslate.sk.html2023-05-10T20:38:33Z2013-01-31T07:50:27Z
<ul>
<li>Autori: Alexy Sadovoy, Beqa Gozalishvili, Mesar Hameed, Alberto Buffolino
a ďalší.</li>
<li>Stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=instantTranslate">stabilnú verziu</a></li>
<li>Stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=it-dev">Vývojovú verziu</a></li>
</ul>
<p>This add-on is used to translate selected and/or clipboard text from one
language to another. This is done using the Google Translate service.</p>
<h2>nastavenie jazykov</h2>
<p>Zdrojový a cieľový jazyk a otáčanie jazykov nastavíte v menu nvda > nastavenia > Rýchly prekladač.</p>
<p>Sú tu dva zoznamy označené ako "zdrojový jazyk", "Cieľový jazyk" a
začiarkávacie políčko, ktoré určuje, či sa bude preložený text automaticky
kopírovať do schránky.</p>
<p>Ak zvolíte ako zdrojový jazyk možnosť automaticky, pribudne v dialógu
možnosť nastaviť jazyk pre automatické otáčanie a začiarkávacie políčko,
ktorého začiarknutím zaistíte automatické otáčanie.</p>
<p>Nastavenie zdrojového a cieľového jazyka je jasné. Preto si vysvetlíme
ostatné nastavenia. Budeme predpokladať, že sme ako zdrojový jazyk zvolili
možnosť automaticky.</p>
<p>Jazyk, ktorý zvolíte v zozname "Sekundárny jazyk" sa použije, ak otočíte
jazyky pomocou klávesovej skratky (popíšeme neskôr). Ak dáte preložiť text z
rovnakého jazyka, ako je zdrojový jazyk, doplnok bude predpokladať, že ako
zdrojový jazyk má použiť práve tento sekundárny jazyk.</p>
<p>Predpokladajme, že zvyčajne prekladáte do angličtiny. Niekedy ale chcete
preložiť anglický text do taliančiny. Preto si nastavíte "sekundárny jazyk"
na taliančinu.</p>
<p>Ak ste ako zdrojový jazyk vybrali možnosť automatická detekcia, môžete stále
začiarknuť možnosť automatické otáčanie: ak ju začiarknete, doplnok sa
pokúsi zistiť z akého do akého jazyka má prekladať, pričom bude vychádzať z
jazyka, ktorý nastavíte v zozname "sekundárny jazyk". Toto je užitočné, ak
prekladáte do nejakého jazyka a niekedy naopak potrebujete prekladať z tohto
jazyka do iného jazyka.</p>
<p>Ak napríklad prekladáte text z iného ako anglického jazyka, dostanete
preklad do angličtiny. Ak ale zadáte na preloženie text v angličtine,
doplnok rozpozná jazyk a automaticky bude prekladať do taliančiny.</p>
<p>Anyway, this is a temporary configuration; if this option has no effect
(it's experimental), try to commute manually to a stable configuration,
using the gesture for swapping described below. It's experimental because in
some situations (with short texts, typically), Google does not recognize the
real source language correctly, and you have to swap languages manually via
script, so to force the source language to be the previous target language
(English in our example).</p>
<p>At least, in the speech settings parameters dialog (NVDA Menu >> Preferences >> Speech), you may want to check the "Automatic language switching (when supported)" option. This way, if you are using a multi-lingual synthesizer, the translation will be announced using the target language voice of the synthesizer.</p>
<h2>Použitie</h2>
<p>You can use this add-on in three ways:</p>
<ol>
<li>Select some text using selection commands (shift with arrow keys, for
example) and press associated key to translate. translation result will
be read with synthesizer which you are using.</li>
<li>Takisto môžete prekladať text zo schránky.</li>
<li>Press the dedicated shortcut key to translate the last spoken text.</li>
</ol>
<h2>Klávesové skratky</h2>
<p>Pred Každým príkazom najprv stlačte skratku NVDA+SHIFT+t.</p>
<ul>
<li>T: Preloží vybratý text,</li>
<li>shift+t: preloží text v schránke,</li>
<li>S: Otočí zdrojový a cieľový jazyk,</li>
<li>A: Oznámi nastavenie jazykov,</li>
<li>C: Skopíruje preklad do schránky.</li>
<li>I: Zistí jazyk vybratého textu,</li>
<li>L: translate the last spoken text,</li>
<li>O: open translation settings dialog</li>
<li>H: announces all available layered commands.</li>
</ul>
<h2>Changes for 4.4.3</h2>
<ul>
<li>Added the ability to replace underscores with spaces, may provide better
translation results depending on context (thanks to Beka Gozalishvili)</li>
<li>Added compatibility for NVDA 2022.1</li>
</ul>
<h2>Changes for 4.4.2</h2>
<ul>
<li>Restore language detection and auto-swapping (Thanks to Cyrille for fix)</li>
<li>updated languages for translation (thanks to Cyrille)</li>
</ul>
<h2>Changes for 4.4</h2>
<ul>
<li>Instant translate is now compatible with NVDA 2019.3 (Python 3 versions of
NVDA)</li>
</ul>
<h2>Changes for 4.3</h2>
<ul>
<li>nvda compatibility fix Now instant translate will be compatible with
latest nvda builds.</li>
<li>found a way to use google as a translation service again.</li>
</ul>
<h2>Changes for 4.2</h2>
<ul>
<li>Restored working state with newer versions of nvda.</li>
<li>Restored automatic language detection.</li>
</ul>
<h2>Zmeny vo verzii 4.1</h2>
<ul>
<li>Namiesto Google sa teraz na preklad používa služba Yandex.</li>
</ul>
<h2>Zmeny vo verzii 4.0</h2>
<ul>
<li>Text bude automaticky preložený po výmene jazykov.</li>
<li>Opravené problémy s pamäťou.</li>
</ul>
<h2>Zmeny vo verzii 3.0</h2>
<ul>
<li>Prerobené klávesovéskratky. Všetky príkazy odteraz začínajú skratkou
NVDA+Shift+t. Zoznam skratiek nájdete v časti klávesové skratky.</li>
<li>Implementované otáčanie jazykov.</li>
<li>Zmenil sa formát ukladania konfigurácie. Nastavenia sa dajú meniť aj v
prípade, že je médium Iba na čítanie, nastavenia platia len po najbližší
reštart NVDA.</li>
<li>odstránený limit, P</li>
<li>pridaná skratka pre nastavenia Instant translate do názvu položky v menu</li>
<li>Možnosť automaticky detegovať jazyk je ako prvá v zozname zdrojový jazyk a
bola odstránená zo zoznamu do jazyka</li>
<li>pridané začiarkavacie políčko na nastavenie kopírovania prekladu.</li>
<li>Konfiguračný súbor je v hlavnom adresáry s nastaveniami.</li>
<li>Pridané všetky podporované jazyky Google (sta k 22. 4. 2015).</li>
</ul>
<h2>Zmeny vo verzii 2.1</h2>
<ul>
<li>NVDA+shift+y preloží text v schránke.</li>
</ul>
<h2>Zmeny vo verzii 2.0</h2>
<ul>
<li>Pridané okno kde sa dá nastaviť cieľový a koncový jazyk.</li>
<li>Dialóg sa dá otvoriť z menu možnosti.</li>
<li>nastavenia sa ukladajú do samostatného súboru.</li>
<li>Výsledok prekladu sa automaticky skopíruje do schránky.</li>
</ul>
<h2>Zmeny vo verzii 1.0</h2>
<ul>
<li>Prvé vydanie.</li>
</ul>
OCRhttp://addons.nvda-project.org/addons/ocr.sk.html2023-05-10T20:38:33Z2013-01-23T06:25:19Z
<ul>
<li>Autori: NV Access Lukasz Golonka a ďalší</li>
<li>Funguje s NVDA od verzie 2019.3</li>
<li>Stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=ocr">stabilnú verziu</a></li>
<li>Stiahnuť <a href="https://www.nvaccess.org/files/nvda-addons/ocr_0.20120529.01.nvda-addon">verziu pre NVDA 2019.2 a staršie</a></li>
</ul>
<p>Important: if you are using NVDA 2017.3 or later on Windows 10, please
consider using built-in Windows 10 OCR.</p>
<p>Rozpoznáva text pomocou OCR na neprístupných objektoch. Na analýzu používa
rozhranie Tesseract. Pomocou objektovej navigácie sa nastavte na objekt,
ktorý chcete rozpoznať a stlačte NVDA+R. Klávesovú skratku je možné upraviť
v dialógu klávesové skratky, vo vetve rôzne. Jazyk rozpoznávania môžete
nastaviť v menu NVDA>Nastavenia OCR.</p>
<h2>Change log:</h2>
<h3>Changes for 2.1:</h3>
<ul>
<li>When recognition is performed on an edit field it is now possible to
navigate it with the system caret without moving focus from it and back
again.</li>
<li>Tesseract release info is no longer written to the focused console.</li>
<li>When no text is recognized this fact is announced to the user.</li>
<li>It is no longer possible to attempt recognition on an invisible object.</li>
<li>WX is now used to capture images instead of Pillow.</li>
</ul>
<h3>Changes for 2.0:</h3>
<ul>
<li>Compatibility with NVDA 2019.3 and later.</li>
<li>It is possible to set different recognition languages for different
configuration profiles.</li>
<li>OCR settings can now be changed from NVDA settings dialog rather than from
a separate dialog in the tools menu.</li>
</ul>
Extended Winamphttp://addons.nvda-project.org/addons/extendedWinamp.sk.html2023-05-10T20:38:33Z2013-01-16T02:37:38Z
<ul>
<li>Authors: Hrvoje Katic, Beqa Gozalishvili and NVDA-addon-team</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=extendedWinamp">stable version</a></li>
<li>NVDA compatibility: 2020.1 and beyond</li>
</ul>
<p>This add-on extends the original Winamp app module found in NVDA with some
extra functionality.</p>
<ul>
<li>S: toggle shuffle on/off</li>
<li>R: toggle repeat on/off</li>
<li>F5: mute playback</li>
<li>F6: set playback volume to 25%</li>
<li>F7: set playback volume to 50%</li>
<li>F8: set playback volume to 100%</li>
<li>Shift+Left arrow: pan Left</li>
<li>Shift+Right arrow: pan Right</li>
<li>Shift+Up arrow: pan Center</li>
<li>Control+Shift+T: speaks total Track Length</li>
<li>Control+Shift+E: speaks track Elapsed Time</li>
<li>Control+Shift+R: speaks track Remaining Time</li>
<li>Shift+R: Review the end of track "last 6 seconds by default"</li>
<li>Control+R: Set the review time "in seconds" for use with Review End of
Track command</li>
<li>Shift+J: Set alternate jump time "in seconds"</li>
<li>Control+Right arrow: alternate Jump Forward "6 seconds by default"</li>
<li>Control+Left arrow: alternate Jump Backward "6 seconds by default"</li>
</ul>
<h2>Changes for 2.0</h2>
<ul>
<li>Resolved many coding style issues and potential bugs with Flake8.</li>
<li>Made compatible with NVDA 2021.1.</li>
</ul>
<h2>Changes for 1.2</h2>
<ul>
<li>Updated Addon to work on NVDA 2019.3 and above.</li>
<li>New languages: Croatian, Polish, Simplified Chinese.</li>
</ul>
<h2>Zmeny pre verziu 1.1</h2>
<ul>
<li>Nové jazyky: Aragónčina, Arabčina, Holandčina, Nemčina, Fínčina,
Francúzsština, Galijcíčina, Maďarčina, Taliančina, japončina, Kórejčina,
nepálčina, Brazílska portugálčina, Ruština, Slovenčina, Slovinčina,
Španielčina, Tamilčina, Turečtina.</li>
</ul>
<h2>Zmeny pre 1.0</h2>
<ul>
<li>prvé vydanie</li>
</ul>
dropboxhttp://addons.nvda-project.org/addons/dropbox.sk.html2023-05-10T20:38:33Z2012-09-16T16:27:07Z
<ul>
<li>Autori: Patrick ZAJDA <a href="mailto:patrick@zajda.fr">patrick@zajda.fr</a>, Filaos a ďalší</li>
<li>NVDA compatibility: NVDA 2019.1 or later</li>
<li>Stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=dropbox">stabilnú verziu</a></li>
<li>Stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=dx-dev">vývojovú verziu</a></li>
</ul>
<p>Na prvé stlačenie klávesovej skratky Oznamuje stav Dropboxu. Dvojité
stlačenie klávesovej skratky otvorí kontextové menu. Tiež upravuje
prístupnosť položiek v menu.</p>
<ul>
<li>Skratka: NVDA+alt+D</li>
</ul>
<h2>Changes for 4.6</h2>
<ul>
<li>Specify NVDA 2021.1 compatibility</li>
</ul>
<h2>Zmeny vo verzii 4.4</h2>
<ul>
<li>Kompatibilné s prostredím Python 3</li>
<li>Používa šablónu posledného doplnku</li>
<li>Repozitár je postavený na Appveyor</li>
<li>Odstránené nepoužívané klávesové skratky z dokumentácie</li>
<li>Upravený popis v návode k doplnku a odstránená informácia o oznamovaní
verzie</li>
</ul>
<h2>Zmeny vo verzii 4.0</h2>
<ul>
<li>Pomocník k doplnku je dostupný zo správcu doplnkov.</li>
<li>Klávesová skratka zmenená na nvda+alt+d, aby nedochádzalo ku konfliktom s
funkciou stíšenia.</li>
</ul>
<h2>Zmeny vo verzii 3.1</h2>
<ul>
<li>Používa sa lepší spôsob na získanie cesty k tlačidlu zrušiť (cancel). Nie
je viac potrebné naň prejsť. Takisto záložky nemusia viac získať fokus
pred použitím skratiek.</li>
<li>pri zmene aktívnej záložky sa tiež zmení fokus tak, že je na prvej položke
novej záložky a nie na položke starej záložky, ktorá viac nie je aktívna.</li>
<li>na prechod medzi záložkami sa dajú použiť skratky ctrl+page
up/down. Ctrl+tab a ctrl+shift+tab ostali zachované.</li>
<li>Všetky manifest súbory by mali byť v poriadku.</li>
<li>Drobné úpravy.</li>
</ul>
<h2>Zmeny vo verzii 3.0</h2>
<ul>
<li>Úprava v súbore manifest (autori sa zobrazujú správne)</li>
<li>Zlepšená podpora pre zobrazenie kontextovej ponuky po trojitom stlačení
nvda+shift+D.</li>
<li>Ak používate NVDA v tom istom jazyku, ako Dropbox, funguje kláves Escape.</li>
<li>Mnoho úprav v kóde.</li>
<li>Pridaná a aktualizovaná dokumentácia pre skratky.</li>
<li>Nové jazyky: Arabčina, Brazílska portugalčina, Čeština, Holandčina,
Fínčina, Galijcíčina, Nemčina, Maďarčina, japončina, Nepálčina, Poľština,
Ruština, Španielčina, Slovenčina, Tamilčina, Turečtina.</li>
</ul>
<h2>Zmeny vo verzii 2.0</h2>
<ul>
<li>Preložený do Taliančiny</li>
<li>Stlačenie NVDA+Shift+D trikrát alebo viac, ak je fokus už v kontextovom
menu nespôsobuje problémy.</li>
</ul>
<h2>Zmeny vo verzii 1.0</h2>
<ul>
<li>Prvé vydanie</li>
</ul>
Systémový panelhttp://addons.nvda-project.org/addons/systrayList.sk.html2023-05-10T20:38:33Z2012-09-16T16:27:07Z
<ul>
<li>Autori: Rui Fontes, Rui Batista, Joseph Lee a ďalší</li>
<li>Stiahnuť <a href="https://www.nvaccess.org/addonStore/legacy?file=systrayList">stabilnú verziu</a></li>
<li>NVDA compatibility: 2019.3 and beyond</li>
</ul>
<p>Môžete zobraziť položky na systémovej lište a na panely úloh v jednoduchom
dialógu. V zozname potom môžete položku aktivovať. Skratkou NVDA+F11
zobrazíte položky na systémovej lište. Ak skratku stlačíte dvakrát za sebou,
zobrazí sa panel bežiacich úloh.</p>
<p>Všimnite si, že na systémovú lištu sa dostanete aj štandardným príkazom
Windows, skratkou Windows+b. Na panel úloh sa dostanete stlačením
windows+t. Tento doplnok je užitočný najmä pre tých, ktorí doposiaľ
používali JAWS a takisto na zabránenie zobrazenia bublín, ktoré vyskakujú
pri použití štandardnej navigácie Windows.</p>
<h2>Changes for 4.0 - 2020-01-03</h2>
<ul>
<li>Vyžaduje NVDA od verzie 2019.3.</li>
<li>Podporuje len Windows od vezie 7 Servicepack 1.</li>
<li>Zmenený anglický názov doplnku.</li>
<li>Odstránená žiadosť o príspevok.</li>
</ul>
<h2>Changes for 3.2 - 2018-12-24</h2>
<ul>
<li>Upravený kód pre podporu Python 3.</li>
</ul>
<h2>Changes for 3.1 - 2018-11-24</h2>
<ul>
<li>Interné zmeny pre podporu budúcich vydaní NVDA.</li>
</ul>
<h2>Changes for 3.0 - 2018-10-25</h2>
<p>Podpora pre staršie systémy Windows bude ukončená v roku 2019.</p>
<ul>
<li>Doplnok kompatibilný s prostredím Python 3.</li>
</ul>
<h2>Changes for 2.0 - 2017-05-20</h2>
<ul>
<li>Dialógy sú zobrazené v strede obrazovky.</li>
<li>Opravené problémy s používateľským rozhraním.</li>
<li>Nové a aktualizované preklady.</li>
</ul>
<h2>Changes for 1.5 - 2015-mm-dd</h2>
<ul>
<li>opravené klikanie ľavým a pravým tlačidlom myši.</li>
<li>Pomocník k doplnku je dostupný zo správcu doplnkov.</li>
<li>Aktualizované preklady.</li>
</ul>
<h2>Zmeny vo verzii 1.4 - 19. 1. 2013</h2>
<ul>
<li>Vyžaduje NVDA 2012.3beta2 alebo novší.</li>
<li>Pridaná možnosť prispieť</li>
<li>pridaná podpora pre panel úloh</li>
<li>Preklad do Arabčiny, Bulharštiny, Holandčiny, Fínčiny, Galijcíčiny,
Gréčtiny, Maďarčiny, Taliančiny, Japončiny, Korejčiny, Nepálčiny, Nórčiny,
Poľštiny, Brazílskej portugalčiny, Ruštiny, Slovenčiny, Tamilčiny,
tradyčnej čínštiny.</li>
</ul>
<h2>Zmeny vo verzii 1.3 - 25. 5. 2012</h2>
<ul>
<li>Konverzia na doplnok pre NVDA</li>
<li>Preklad do Francúzštiny a Turečtiny</li>
</ul>
<h2>Zmeny vo verzii 1.2 - 25.4.2012</h2>
<ul>
<li>Preklad do Španielčiny a Nemčiny. Ďakujem všetkým, ktorí pomohli.</li>
</ul>
<h2>Zmeny vo verzii 1.1 20. 3. 2012</h2>
<ul>
<li>Plugin funguje aj v prípade, ak nie je dostupný gettext preklad</li>
</ul>
<h2>Zmeny vo verzii 1.0 - 19. 3. 2012</h2>
<ul>
<li>Prvé vydanie</li>
</ul>