欢迎访问 NVDA 插件社区页面NVDA Community Addonshttp://addons.nvda-project.org/index.zh_CN.htmlNVDA Community Addonsikiwiki2024-03-26T20:46:23ZCustom Browse Modehttp://addons.nvda-project.org/addons/customBrowseMode.zh_CN.html2024-03-11T05:29:28Z2024-03-10T19:16:56Z
<ul>
<li>Author: Noelia Ruiz Martínez, Ever Solis</li>
</ul>
<p>This add-on is used to activate or deactivate profiles deppending on the
state of browse mode.</p>
<p>Currently, when browse mode is active, a profile named browseMode will be
activated, and it will be deactivated when browse mode becomes inactive.</p>
<p>The browseMode profile will be automatically created if it doesn't exist.</p>
Perky Duckhttp://addons.nvda-project.org/addons/perky.zh_CN.html2024-03-10T19:12:07Z2024-02-15T09:04:01Z
<ul>
<li>Authors: Alejandro Iván Castro Orozco, Noelia Ruiz Martínez</li>
</ul>
<p>This add-on is used to improve the reading experience with Perky Duck,
available at <a href="https://www.duxburysystems.com">https://www.duxburysystems.com</a>.</p>
<h3>Features</h3>
<ul>
<li>Enables NVDA to detect selection changes when UI Automation is disabled in
Perky Duck. Without the add-on, NVDA detects these changes only when UI
Automation is enabled.</li>
<li>Adds the possibility of using the speak typed characters feature of NVDA
in Perky Duck documents.</li>
</ul>
<h3>Commands</h3>
<p>The following commands can be assigned from NVDA's menu, Preferences
submenu, Input gestures dialog, Perky Duck category. This will be available
from Perky Duck documents:</p>
<ul>
<li>Opens the symbols dialog for reading characters typed in Perky. From this
dialog, you can save and choose symbols dictionaries.</li>
<li>Shows the selected text converted to braille using symbols for the current
language.</li>
<li>Shows the selected text in browse mode.</li>
</ul>
Custom Notificationshttp://addons.nvda-project.org/addons/customNotifications.zh_CN.html2024-02-13T14:38:14Z2024-02-08T18:50:45Z
<ul>
<li>Authors: José Fischer, Noelia Ruiz Martínez</li>
</ul>
<p>This add-on is used to customize toast notifications.</p>
<p>You can choose to read the whole notification or just the application which
sends it, and if notifications will be spoken, displayed in braille or both.</p>
<h2>Settings</h2>
<p>Go to NVDA's menu, Preferences submenu, Settings, and select the Custom
Notifications category. There you'll find the following controls:</p>
<ul>
<li>A checkbox to choose if notifications should be truncated, checked by
default.</li>
<li>An edit box to set the start limit of notifications, empty by default.</li>
<li>An edit box to set the end limit of notifications, ", " (comma space) by
default.</li>
<li>A list of checkboxes to select if notifications should be spoken and
displayed in braille, both checked by default.</li>
<li>An edit box to type a text to send a test notification, to get an idea of
how NVDA will present toasts.</li>
<li>If the previous edit box contains text, a button to send a notification,
so you can test if your selected settings work fine for you.</li>
</ul>
<p>You can assign a gesture to open the add-on settings panel, and to toggle
various add-on settings, from NVDA's menu, Preferences submenu, Input
gestures dialog, Configuration category.</p>
<h2>Changes for 2.0.0</h2>
<ul>
<li>In the add-on settings panel, added an edit box to set the start limit of
notifications.</li>
</ul>
XPoseImageCaptionerhttp://addons.nvda-project.org/addons/XPoseImageCaptioner.zh_CN.html2023-08-25T03:00:12Z2023-08-25T03:00:12Z
<ul>
<li>Authors: Christopher Millsap</li>
<li>download <a>development version</a></li>
</ul>
<p>This addon can create a descriptive caption of any JPG or PNG image in File
Explorer, Microsoft Edge, Google Chrome, and Firefox. It does this using
machine learning and presents the caption in a window so that the text of
the caption can be examined as well as speaking the text.</p>
<h2>Usage</h2>
<p>First, select an image file in Windows File Explorer, or in a web
browser. Chrome, Edge, and Firefox are supported. With the image selected,
presss NVDA+x. the addon will respond with "Captioning, please wait..." as
the image is analyzed by the machine learning module and
captioned. Depending on your machine's CPU speed, captioning will take
between two and five seconds. After captioning is complete, a window will
open with the caption of the image and the caption will be read. When you
are finished browsing the caption, you can press escape to close the caption
window.</p>
<h3>Getting the most out of XPoseImageCaptioner</h3>
<p>There are several things to be aware of when using the XPoseImageCaptioner
to get the best results:</p>
<ol>
<li>XPoseImageCaptioner captioning works best for photographs and cartoons or
other artwork. It also can work fairly well for memes and ads. It does
not work well for charts and is not a replacement for OCR. If you have an
image of a text document, use an OCR addon rather than
XPoseImageCaptioner.</li>
<li>AI captioning can tell you what is in an image but can't tell you why it
is there. ALT text should still be used to find out about an image's
context. For example, on a news site you may see an image with the ALT
text "a general gives testimony in a congressional hearing about the
millitary budget", the AI caption could be something like "a man in a
formal millitary uniform speaks into a microphone while seated in a wood
paneled room". The AI caption tells you what is in the image, but the ALT
text ideally should tell you why its there.</li>
<li>The BLIP neural network, on which the XPoseImageCaptioner addon is based,
can only output English text. Retraining the model to support languages
other than English is not feasable at this time.</li>
<li>While the captions produced are currently very close to the state of the
art for AI captioning of images, they are not always 100%
accurate. Please use with caution and common sense and never in place of
OCR. Also, do not rely on the output for dangerous or high-risk
situations.</li>
<li>Currently, XPoseImageCaptioner works for websites that don't require a
login. For example, the public pages of organizations such as <a href="https://www.guidingeyes.org/">Guiding
Eyes for the Blind</a> or
<a href="https://www.cnn.com/">CNN</a>. Pages that require a login, such as Facebook
or Twitter, are not yet supported because the addon must download an
image from the web site independantly to caption it and can't do so if a
login is required. As a workaround, any image from sites requiring a
login could be downloaded to the local machine and captioned using the
addon in File Explorer.</li>
<li>XPoseImageCaptioner only works on FireFox when an image does not have ALT
text. FireFox does not provide a direct link to an image file to a screen
reader if an image has ALT text. Without this information, the addon
can't download the image for the AI to caption. Chrome and Microsoft Edge
do not have this limitation, and work regardless of whether an image has
ALT text or not.</li>
</ol>
<h2>Copyright:</h2>
<p>Copyright (c) 2023 Christopher Millsap</p>
<p>I learned a great deal from the NAO OCR addon in terms of how it deals with
Windows File Explorer in NVDA. Thanks to Alessandro Albano, Davide De Carne,
and Simone Dal Maso for their work on that addon. Also, XPoseImageCaptioner
uses the BLIP neural network weights and code by Salesforce.com, but is not
affiliated with or endorsed by Salesforce.com in any way.</p>
<h2>Licence</h2>
<p>Licensed under the BSD 3 Clause License. This addon is not endorsed in any
way by Salesforce.com.</p>
<p>https://github.com/cmillsap/XPoseImageCaptioner/releases/download/v0.8.4/XPoseImage.Captioner-0.8.4.nvda-addon</p>
Remote Desktop Accessibilityhttp://addons.nvda-project.org/addons/rdAccess.zh_CN.html2023-08-29T16:58:22Z2023-07-27T14:08:30Z
<ul>
<li>Authors: <a href="https://github.com/leonardder/">Leonard de Ruijter</a></li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=rdAccess">latest stable version</a></li>
<li>NVDA compatibility: 2023.2 and later</li>
</ul>
<p>The RDAccess add-on (Remote Desktop Accessibility) adds support to access
remote desktop sessions to NVDA using Microsoft Remote Desktop, Citrix or
VMware Horizon. When installed in NVDA on both the client and the server,
speech and braille generated on the server will be spoken and brailled by
the client machine. This enables a user experience where managing a remote
system feels just as performant as operating the local system.</p>
<h2>Features</h2>
<ul>
<li>Support for Microsoft Remote Desktop, Citrix and VMware Horizon</li>
<li>Speech and braille output</li>
<li>Automatic detection of remote braille using NVDA's automatic braille
display detection</li>
<li>Automatic detection of remote speech using a dedicated detection process
that can be disabled in NVDA's settings dialog</li>
<li>Support for portable copies of NVDA running on a server (additional
configuration required for Fitrix)</li>
<li>Full support for portable copies of NVDA running on a client (no
additional administrative privileges required to install the add-on)</li>
<li>Multiple active client sessions at the same time</li>
<li>Remote desktop instantly available after NVDA start</li>
<li>Ability to control specific synthesizer and braille display settings
without leaving the remote session</li>
<li>Ability to use speech and braille from the user session when accessing
secure desktops</li>
</ul>
<h2>Changelog</h2>
<h3>Version 1.0</h3>
<p>Initial stable release.</p>
<h2>Getting started</h2>
<ol>
<li>Install RDAccess in both a client and server copy of NVDA.</li>
<li>The remote system should automatically start speaking using the local
speech synthesizer. If not, in the NVDA instance on the server, select
the remote speech synthesizer from NVDA"s synthesizer selection dialog.</li>
<li>To use braille, enable automatic braille display detection using the
braille display selection dialog.</li>
</ol>
<h2>Configuration</h2>
<p>After installation, the RDAccess add-on can be configured using NVDA's settings dialog, which can be accessed from the NVDA Menu by choosing Preferences > Settings...
After that, choose the Remote Desktop category.</p>
<p>This dialog contains the following settings:</p>
<h3>Enable remote desktop accessibility for</h3>
<p>This list of check boxes controls the operating mode of the add-on. You can
choose between:</p>
<ul>
<li>Incoming connections (Remote Desktop Server): Choose this option if the
current instance of NVDA is running on a remote desktop server</li>
<li>Outgoing connections (Remote Desktop Client): Choose this option if the
current instance of NVDA is running on a remote desktop client that
connects to one or more servers</li>
<li>Secure Desktop pass through: : Choose this option if you want to use
braille and speech from the user instance of NVDA when accessing the
secure desktop. Note that for this to work, you need to make the RDAccess
add-on available on the secure desktop copy of NVDA. For this, choose "Use
currently saved settings during sign-in and on secure screens (requires
administrator privileges)" in NVDA's general settings.</li>
</ul>
<p>To ensure a smooth start with the add-on, all options are enabled by
default. You are however encouraged to disable server or client mode as
appropriate.</p>
<h3>Automatically recover remote speech after connection loss</h3>
<p>This option is only available in server mode. It ensures that the connection
will automatically be re-established when the Remote Speech synthesizer is
active and the connection is lost. The behavior is very similar to that of
braille display auto detection. This also clarifies why there is only such
an option for speech. The reconnection of the Remote Braille display is
automatically handled when choosing the Automatic option from the Braille
Display Selection dialog.</p>
<p>This option is enabled by defalt. You are strongly encouraged to leave this
option enabled if the Remote Desktop server has no audio output.</p>
<h3>Allow remote system to control driver settings</h3>
<p>This client option, when enabled, allows you to control driver settings
(such as synthesizer voice and pitch) from the remote system. This is
especially useful when you have difficulties accessing the local NVDA menu
when controlling a remote system. Changes performed on the remote system
will automatically be reflected locally.</p>
<p>While enabling this option implies some performance degradation, you are yet
advised to enable it. When this option is disabled, speech synthesizer
ppitch changes for capitals don't work.</p>
<h3>Persist client support when exiting NVDA</h3>
<p>This client option is only available on installed copies of NVDA. When
enabled, it ensures that the client portion of NVDA is loaded in your remote
desktop client, even when NVDA is not running.</p>
<p>To use the client portion of RDAccess, several changes have to be maede in
the Windows Registry. The add-on ensures that these changes are made under
the profile of the current user. These changes don't require administrative
privileges. Therefore, NVDA can automatically apply the necessary changes
when loaded, and undo these changes when exiting NVDA. This ensures that
the add-on is fully compatible with portable versions of NVDA.</p>
<p>This option is disabled by default. However, if you are running an
installed copy and you are the only user of the system, you are advised to
enable this option. This ensures smooth operation in case NVDA is not
active when connecting to a remote system and is then started afterwards.</p>
<h3>Enable Microsoft Remote Desktop support</h3>
<p>This option is enabled by default and ensures that the client portion of
RDAccess is loaded in the Microsoft Remote Desktop client (mstsc) when
starting NVDA. Unless persistent client support is enabled by enabling the
previous option, these changes will be automatically undone when exiting
NVDA.</p>
<h3>Enable Citrix Workspace support</h3>
<p>This option is enabled by default and ensures that the client portion of
RDAccess is loaded in the Citrix Workspace app when starting NVDA. Unless
persistent client support is enabled by enabling the previous option, these
changes will be automatically undone when exiting NVDA.</p>
<p>This option is only available in the following cases:</p>
<ul>
<li>Citrix Workspace is installed. Note that the Windows Store version of the
app is not supported due to limitations in that app itself</li>
<li>It is possible to register RDAccess under the current user context. After
installing the app, you have to start a remote session once to make this
possible</li>
</ul>
<h2>Citrix specific instructions</h2>
<p>There are some important points of attention when using RDAccess with the
Citrix Workspace app.</p>
<h3>Client side requirements</h3>
<ol>
<li>The Windows Store variant of the app is <em>not</em> supported.</li>
<li>After installing Citrix Workspace, you have to start a remote session
once to allow RDAccess registering itself. The reason behind this is that
the application copies the system configuration to the user configuration
when it establishes a session for the first time. After that, RDAccess
can register itself under the current user context.</li>
</ol>
<h3>Server side requirement</h3>
<p>In Citrix Virtual Apps and Desktops 2109, Citrix enabled the so called
virtual channel allow list. This means that third party virtual channels,
including the channel required by RDAccess, is not allowed by default. For
more information, <a href="https://www.citrix.com/blogs/2021/10/14/virtual-channel-allow-list-now-enabled-by-default/">see this Citrix blog
post</a></p>
<p>Explicitly allowing the RdPipe channel required by RDAccess is not yet
tested. For now, it is probably your best bet to disable the allow list
altogether. If your system administrator is unhappy with this, feel free to
<a href="https://github.com/leonardder/rdAccess/issues">drop a line in the devoted issue</a></p>
<h2>Issues and contributing</h2>
<p>If you want to report an issue or contribute, take a look at <a href="https://github.com/leonardder/rdAccess/issues">the issues
page on Github</a></p>
<h2>External components</h2>
<p>This add-on relies on <a href="https://github.com/leonardder/rd_pipe-rs">RD Pipe</a>, a library written in Rust backing the
remote desktop client support. RD Pipe is redistributed as part of this
add-on under the terms of <a href="https://github.com/leonardder/rd_pipe-rs/blob/master/LICENSE">version 3 of the GNU Affero General Public
License</a> as published by the Free Software Foundation.</p>
WhatsAppPlushttp://addons.nvda-project.org/addons/whatsAppPlus.zh_CN.html2023-06-12T14:03:02Z2023-06-11T16:37:15Z
<ul>
<li>Author: Kostya Gladkiy (Ukrain)</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=whatsAppPlus">stable version</a> (Compatible with NVDA 2021.2 to 2023.1)</li>
<li><a href="https://t.me/unigramPlus">Telegram channel</a></li>
</ul>
<h2>About</h2>
<p>This add-on makes it easy to use the UWP version of the WhatsApp app,
allowing users to easily interact with chats, messages, context menu items,
and more.</p>
<h3>General features</h3>
<ul>
<li>When replying to a message, the edit field will change the title.</li>
<li>Added accessibility labels for some WhatsApp elements.</li>
<li>A large number of keyboard shortcuts have been added to work productively
and comfortably in WhatsApp, which can be found below.</li>
</ul>
<h2>Keyboard shortcuts:</h2>
<ul>
<li>ALT+1: Move focus to chat list.</li>
<li>ALT+2: Move focus to the last message in an open chat.</li>
<li>ALT+D: Move the focus to the edit field. If the focus is already in the
edit field, then after pressing the hotkey, it will move to where it was
before.</li>
<li>ALT+T: Announce the name and status of an open chat.</li>
<li>ALT+shift+C: Make a voice call to a group or contact, or join an ongoing
voice call in a group.</li>
<li>ALT+shift+V: Make a video call to a contact or group.</li>
<li>ALT+shift+Y: Accept call.</li>
<li>ALT+shift+N: Decline an incoming call or leave the current call.</li>
<li>ALT+A: Turn the microphone on/off.</li>
<li>ALT+V: Turn video on/off.</li>
<li>ALT+O: Press more options button.</li>
<li>control+R: Record and send a voice message.</li>
<li>control+D: Discard reply to a message or currently recorded voice message.</li>
<li>control+shift+D: Pause/resume voice message recording.</li>
<li>ALT+delete: Delete a message or chat.</li>
<li>control+shift+P: Open current chat profile.</li>
<li>control+shift+E: Toggles the feature that removes the reading of the user
number in messages from users whose number is not saved in the contact
list.</li>
<li>ALT+S: Star message.</li>
<li>ALT+F: Forward message.</li>
<li>ALT+R: Reply to message.</li>
<li>ALT+shift+R: Mark a chat as read.</li>
<li>control+C: Copy the message if it contains text.</li>
<li>ALT+C: Show message text in popup window.</li>
<li>NVDA+control+W: Open WhatsAppPlus settings window.</li>
<li>ALT+3: Move focus to "unread messages" label.</li>
<li>control+shift+A: Press the attach file button.</li>
<li>ALT+L: Enable automatic reading of new messages in the current chat.</li>
<li>control+S: Increase/decrease the playback speed of voice messages.</li>
<li>ALT+P: Play/pause a voice message that is playing.</li>
<li>ALT+U: announce the current value of a progress bar. If pressed twice,
turns on/off the automatic announcement of progress bars.</li>
<li>control+space: Switch to selection mode.</li>
</ul>
<h3>Information about the opportunity to donate to the developer:</h3>
<p>If you have a desire, and most importantly, the opportunity to support the
developer of this add-on, you can do it using the following details:</p>
<ul>
<li>PayPal: gladkiy.kostya@gmail.com.</li>
<li><a href="https://unigramplus.diaka.ua/donate">Ukrainian donation system</a></li>
<li>Card number: 5169360009004502 (Gladkiy Constantine).</li>
</ul>
<h2>Changelog</h2>
<h3>Version 1.9.0</h3>
<ul>
<li>Added a keyboard shortcut that opens a list of all WhatsAppPlus keyboard
shortcuts. By default, this function is assigned to ALT+H gesture.</li>
<li>Fixed a bug where ALT+2 and ALT+3 gestures didn't work.</li>
<li>Fixed a bug where it was impossible to activate some functions from the
context menu using gestures.</li>
<li>Fixed an issue where changing voice message playback speed and pausing
voice message playback did not always work.</li>
<li>Fixed a bug where in chats when focusing on your sent messages, instead of
the word "you", the screen reader announced a personal number. To avoid
this, you need to specify the phone number in the WhatsAppPlus settings
and after that the add-on will not report it on your messages.</li>
<li>Fixed an issue where WhatsAppPlus prompted to update on secure screens. To
prevent this from happening again, you need to click on the "Use currently
saved settings during sign-in and on secure screens (requires
administrator privileges)" button in the NVDA general settings.</li>
<li>The gesture to accept a call has been changed to ALT+shift+Y, and the
gesture to decline a call has been changed to ALT+shift+N. This is to
ensure that these gestures do not conflict with UnigramPlus gestures.</li>
<li>Microphone and camera on/off gestures during a call now work correctly.</li>
<li>Removed gesture to set reaction to messages, since in the latest versions
of WhatsApp, reactions are available directly from the context menu.</li>
</ul>
<h3>Version 1.8.0</h3>
<ul>
<li>The add-on has been tested to ensure compatibility with NVDA-2023.</li>
<li>Added a keyboard shortcut for selecting messages. To enter selection mode,
press Ctrl+Space, and then use Space to select the next message.</li>
<li>A new function has been added to automatically announce activity in an
open chat. By default, this feature is enabled by double-pressing the
ALT+T gesture. This helps users stay up to date with new messages and
other chat activities.</li>
<li>The automatic reading of new chat messages has been significantly
redesigned to be more stable. This ensures that users are alerted to new
messages accurately and reliably.</li>
<li>Added labels for some unlabeled buttons.</li>
</ul>
<h3>Version 1.7.0</h3>
<ul>
<li>Added a function that automatically announces the progress bar if the
focus is on a message.</li>
<li>Added a keyboard shortcut to report the value of the progress bar when the
focus is on a message. By default, the ALT+U gesture is assigned to this
feature. If the gesture is pressed twice, the automatic announcement of
the progress bar values will be enabled.</li>
<li>Fixed an issue where focus could not be moved to the chat list.</li>
<li>Added labels to some elements.</li>
</ul>
<h3>Version 1.6.0</h3>
<ul>
<li>Added ability to quickly reply to group members. To enter a message, it is
enough to write the symbol "@" in the message entry field, use the up and
down arrows to select who you want to reply to, and then press the Enter
key.</li>
<li>Added ability to quickly insert emoticons. To do this, you must write a
colon and the name of the emoticon you want to find in the message input
field. Later, use the left and right arrow keys to find the desired
emoticon and use the Enter key to insert it into the message input field.</li>
<li>In the WhatsAppPlus settings, an option has been added to enable the
playback of sounds when recording, pausing and sending voice messages.</li>
<li>Changed the keyboard shortcut for opening the profile of the current
conversation to Control+Shift+P.</li>
<li>Added Nepali localization.</li>
<li>Fixed several bugs, including an issue where automatic reading of new
messages in an open conversation was not working for some users.</li>
</ul>
<h3>Version 1.5.0</h3>
<ul>
<li>Added a keyboard shortcut to change the speed of the voice message being
played. The default gesture is ctrl+s. The gesture will only work when a
voice message is playing in an open chat.</li>
<li>Added a keyboard shortcut to pause a voice message that is playing. The
default gesture is alt+p. The function will only work when a voice message
is playing in an open chat.</li>
<li>Now the announcement of a new message in an open chat can be enabled not
only until NVDA is restarted, but also forever.</li>
</ul>
<h3>Version 1.4.0</h3>
<ul>
<li>Adapted to the latest version of WhatsApp.</li>
<li>Added automatic reading of new messages in open chat. By default, this
feature is activated by pressing ALT+L. The feature remains active only
until NVDA is restarted. May have stability issues if there are too many
new messages.</li>
<li>Added French localization.</li>
</ul>
<h3>Version 1.3.0</h3>
<ul>
<li>The description of the links attached to the message will now be read.</li>
<li>Now the duration of voice messages will be announced.</li>
<li>You can now open links attached to messages with the spacebar</li>
<li>Added labels for some interface elements</li>
<li>Adapted to the latest version of WhatsApp so that all functions work
properly.</li>
<li>Fixed some bugs</li>
</ul>
<h3>Version 1.2.0</h3>
<ul>
<li>Now, when you focus on a message written in reply to another message, the
text of that message will be spoken first and then the text of the message
to which it was sent.</li>
<li>The name and type of files sent in the conversation will now be spoken.</li>
<li>ALT+1 now works even when the chat archive or the selected messages
section is open.</li>
<li>ALT + left arrow helps to close the chat archive or the selected messages
list if they are open.</li>
<li>Now, pressing control+D, in addition to cancelling voice messages, also
cancels the reply to the message.</li>
<li>Information about the impossibility of recording a voice message will now
be reported when the message input field is not empty. This will fix an
issue where pressing Ctrl+R would send a text message instead of starting
to record a voice message.</li>
<li>Added labels for unlabeled elements.</li>
</ul>
<h3>Version 1.1.0</h3>
<ul>
<li>Added keyboard shortcut to navigate to unread messages. Since this feature
is language dependent, this feature can be configured in the WhatsAppPlus
settings.</li>
<li>Added keyboard shortcut for pressing the new chat button.</li>
<li>Added keyboard shortcut for pressing the attach file button.</li>
<li>NVDA will no longer announce the recording control buttons when recording
a voice message.</li>
<li>Added Arabic, Italian, Romanian, Serbian, Croatian, Spanish and Turkish
localizations.</li>
<li>Added labels for some unlabeled elements.</li>
<li>Now information about the reaction to the message will be announced when
focusing on the message.</li>
<li>Now, when playing your own voice messages using the spacebar, a pop-up
window will not appear.</li>
<li>Fixed minor bugs.</li>
</ul>
NVDA Dev & Test Toolboxhttp://addons.nvda-project.org/addons/nvdaDevTestToolbox.zh_CN.html2024-02-16T08:51:26Z2023-06-05T11:56:08Z
<ul>
<li>Author: Cyrille Bougot</li>
<li>NVDA compatibility: 2019.2 and beyond</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=nvdaDevTestToolbox">stable version</a></li>
</ul>
<p>This add-on gathers various features for NVDA debugging and testing.</p>
<h2>Features</h2>
<ul>
<li>An enhanced restart dialog to specify some extra options when restarting
NVDA.</li>
<li>Various features related to logged errors.</li>
<li>An object property explorer.</li>
<li>An extended script description mode: when enabled input help mode report
information on scripts that have no description.</li>
<li>Commands to help log reading and analyzing.</li>
<li>Backups of old logs</li>
<li>In the Python console workspace, a function to open the source code of an
object.</li>
<li>A custom startup script for the Python console</li>
<li>A command to log the stack trace of the speech.speak function.</li>
</ul>
<h2>Enhanced restart dialog</h2>
<p>The NVDA+shift+Q command opens a dialog to specify some extra options before
restarting NVDA. The options that can be specified correspond to the
<a>command line options</a> that can be used with <code>nvda.exe</code>, e.g. <code>-c</code> for
config path, <code>--disable-addons</code> to disable add-ons, etc.</p>
<h2>Features related to logged errors</h2>
<h3>Report last logged error</h3>
<p>Pressing NVDA+shift+alt+E allows to report the last error logged without
needing to open the log. A second press clears the memorized last error.</p>
<h3>Play a sound for logged errors</h3>
<p>The <a>"Play a sound for logged errors" setting</a> has been introduced in
NVDA 2021.3 and allows to specify if NVDA will play an error sound in case
an error is logged.</p>
<p>This add-on provides an additional command (NVDA+control+alt+E) to toggle
this setting. You can choose:</p>
<ul>
<li>"Only in test versions" (default) to make NVDA play error sounds only if
the current NVDA version is a test version (alpha, beta or run from
source).</li>
<li>"Yes" to enable error sounds no matter your current NVDA version.</li>
</ul>
<p>For NVDA prior to 2021.3, this add-on provides the backport of this feature
and the possibility to control it with the keyboard command. The checkbox
in the Advanced settings panel is not backported however.</p>
<h2>Object property explorer</h2>
<p>This feature allows to report some properties of the current navigator
object without opening the log viewer.</p>
<p>To list the properties of an object, move the navigator object to it and use
the following commands:</p>
<ul>
<li>Selects the previous property and reports it for the navigator object.</li>
<li>Selects the next property and reports it for the navigator object.</li>
<li>Reports the currently selected property for the navigator object; two
presses displays this information in a browseable message.</li>
</ul>
<p>The list of the supported properties is the following: name, role, state,
value, windowClassName, windowControlID, windowHandle, location, Python
class, Python class mro.</p>
<p>When using object navigation commands, you can also choose to have the
currently selected property reported instead of NVDA usual object
reporting. A toggle command allows to switch between this custom reporting
of objects and NVDA usual reporting.</p>
<p>For exemple, you may select "windowClassName" property and enable custom
object reporting. Then when moving the navigator object to next or previous
object, you will hear the object's windowClassName instead of usual
reporting.</p>
<p>All the commands of the Object property explorer are unassigned by default;
you will have to assign them a shortcut in the Input gesture dialog to use
them.</p>
<h2>Extended script description mode</h2>
<p>When the Extended script description mode is active, the input help mode
(NVDA+1) is modified as follows. If a script has no description, the
script's name and class are reported. If a script has a description, its
description is reported as usual. The gesture to activate or deactivate
this feature is NVDA+control+alt+D.</p>
<p>Executing a gesture bound to a script without description in input help mode
also create an entry for this script in the gesture management dialog. This
entry is located in a dedicated category called "Scripts without description
(modify at your own risk!)". This allow to easily add, delete or change the
native NVDA gestures for these script. Be aware however that it is often
intended that such script do not have any description to prevent the user to
modify the associated gesture. Indeed, the gesture may be defined to match
an application shortcut key. For example the script script_toggleItalic on
NVDAObjects.window.winword.WordDocument is bound to control+I and this
should not be modified since the gesture is passed to the application to
actually execute the shortcut key.</p>
<h3>Usage example</h3>
<p>Control+shift+I also toggle italic in Word, even if it is not natively
reported by NVDA. To have the control+shift+I result reported by NVDA as
control+I, you should perform the following steps:</p>
<ul>
<li>Open a Word document.</li>
<li>Enable the extended script description mode with NVDA+control+alt+D.</li>
<li>Enter input help mode with NVDA+1.</li>
<li>Press control+I to report the italic script and have it added in the
gesture dialog.</li>
<li>Exit input help mode with NVDA+1.</li>
<li>Open the input gestures dialog.</li>
<li>In the category "Scripts without description (modify at your own risk!)",
select the command "toggleItalic on
NVDAObjects.window.winword.WordDocument".</li>
<li>Add the control+shift+I shortcut and validate.</li>
<li>If you want, exit the extended script description mode with
NVDA+control+alt+D.</li>
</ul>
<p>Known bug: A script added for a specific class is visible even if gesture
manager is opened in another context.</p>
<h2>Log reading and analyzing features</h2>
<p><a id="logPlaceMarkers"></a></p>
<h3>Place markers in the log</h3>
<p>While testing or working, you may want to mark a specific moment in the log, so that you can turn to it easily later when reading the log.
To add a marker message in the log, press NVDA+control+K.
A message as follows will be logged at INFO level:<br />
<code>-- NDTT marker 0 --</code><br />
You can add as many markers as you want in the log. The marker's number
will be incremented each time you place a marker in the log; it will only be
reset when NVDA is restarted.</p>
<h3>Log reader mode</h3>
<p>A log reader mode provides commands to ease log reading and analyzing. In
the log viewer window the log reader is enabled by default, thus log reading
commands are available immediately. In another text reading area such as an
editor (e.g. Notepad++) or a webpage (e.g. GitHub issue), you need to press
NVDA+control+alt+L to enable log reader mode and use its commands. When you
are done with log reading and analyzing tasks, you can disable again
NVDA+control+alt+L to disable the log reader mode.</p>
<p>The commands available in log reader mode are described hereafter.</p>
<p><a id="logReaderQuickNavigationCommands"></a></p>
<h4>Quick navigation commands</h4>
<p>Single letter command similar to browse mode quick navigation keys allow to
move to various type of log messages:</p>
<ul>
<li>m: any message</li>
<li>e: error messages (<code>ERROR</code> and <code>CRITICAL</code>)</li>
<li>w: warning messages (<code>WARNING</code>)</li>
<li>f: info messages (<code>INFO</code>)</li>
<li>k: markers previously <a href="http://addons.nvda-project.org/index.zh_CN.html#logPlaceMarkers">placed in the log</a></li>
<li>g: debug warning messages (<code>DEBUGWARNING</code>)</li>
<li>i: input/output messages (<code>IO</code>)</li>
<li>n: input messages</li>
<li>s: speech messages</li>
<li>d: debug messages (<code>DEBUG</code>)</li>
</ul>
<p>Pressing the single letter moves to the next occurrence of this
message. Combining the letter with the shift key moves to the previous
occurrence of this message.</p>
<h4>Translation of speech message</h4>
<p>Sometimes, you may have to look at a log taken on a system in a foreignh
language that you do not understand. E.g. the log was taken on a Chinese
system / NVDA, whereas you only understand French. If you have <a href="https://addons.nvda-project.org/addons/instantTranslate.en.html">Instant
Translate</a> add-on installed, you may use it in conjonction with <a href="http://addons.nvda-project.org/index.zh_CN.html#logReaderQuickNavigationCommands">quick
log navigation commands</a> to have speech
messages translated.</p>
<ul>
<li>First configure Instant Translate's languages. The source language should
be the language of the system where the log has been taken
(e.g. Chinese). The target language should be your language (e.g. French).</li>
<li>Open the log</li>
<li>Press T to enable automatic speech translation in the log</li>
<li>Use Quick navigation commands in the log, e.g. S, I, etc. Whenever a
speech message is encountered, it will be spoken in your language (French
in our previous example)</li>
</ul>
<p>If you want to disable speech translation, press T again.</p>
<p><a id="logReaderOpenSourceFile"></a></p>
<h4>Open the file of the source code in your editor</h4>
<p>In the log some line may refer to the source code:</p>
<ul>
<li>A line belonging to a traceback contains the path and the line in a file,
e.g.:
<code> File "virtualBuffers\__init__.pyc", line 226, in _getStoryLength</code></li>
<li>The header line of a logged message contains the function which has logged
this message, e.g.:
<code>INFO - config.ConfigManager._loadConfig (22:45:26.145) - MainThread (16580):</code></li>
<li>The content of a message logged in input help mode (logged at info level):
Input help: gesture kb(desktop):NVDA+t, bound to script title on globalCommands.GlobalCommands`</li>
</ul>
<p>You may want to open the file containing this code to understand the context
of the traceback or the logged message. Just press C to open this file.</p>
<p>For this feature to work, you need to have configured your <a href="http://addons.nvda-project.org/index.zh_CN.html#settingsOpenCommand">favorite
editor's command</a> in the add-on's settings. If you
are not running NVDA from source, the <a href="http://addons.nvda-project.org/index.zh_CN.html#settingsNvdaSourcePath">location of NVDA source
code</a> should also have been configured.</p>
<p><a id="oldLogsBackup"></a></p>
<h2>Backup of old logs</h2>
<p>NVDA already provides a backup of the log of the previous session of NVDA;
the file is called <code>nvda-old.log</code>. Sometimes however you may want to access
older logs, e.g. because you have had to restart NVDA again before looking
at <code>nvda-old.log</code>. This add-on allows you to configure if you want to
backup old logs and how many of them; this is done in the <a href="http://addons.nvda-project.org/index.zh_CN.html#settingsLogsBackup">add-on's
settings</a>.</p>
<p>A log manager dialog allows to view the backed up logs.
It can be opened going to NVDA menu -> Tools -> Logs manager
In this dialog, you can see the list of all the backup logs, open or delete them.
To be able to open a log, you should first have configured the <a href="http://addons.nvda-project.org/index.zh_CN.html#settingsOpenCommand">Command to open a file in your favorite editor</a>.</p>
<h2>Python console extension</h2>
<p><a id="pythonConsoleOpenCodeFile"></a></p>
<h3><code>openCodeFile</code> function</h3>
<p>In the console, you can call the following function to view the source code that defines the variable <code>myVar</code>:<br />
<code>openCodeFile(myVar)</code></p>
<p>For this feature to work, you need to have configured your <a href="http://addons.nvda-project.org/index.zh_CN.html#settingsOpenCommand">favorite
editor's command</a> in the add-on's settings. If you
are not running NVDA from source, the <a href="http://addons.nvda-project.org/index.zh_CN.html#settingsNvdaSourcePath">location of NVDA source
code</a> should also have been configured.</p>
<p>The <code>openCodeFile</code> functions can be called on objects defined in NVDA's code
or on objects defined by add-ons. It cannot be called on objects whose
source code is not available such as python builtins.</p>
<p>If you have not yet imported the object in the console, you can also pass
its name as parameter to the <code>openCodeFile</code> function.</p>
<p>Below are examples of call in NVDA's code:</p>
<ul>
<li>View the definition of the function <code>speech.speech.speak</code>:
<code>openCodeFile(speech.speech.speak)</code><br />
or with the name passed as parameter:<br />
<code>openCodeFile("speech.speech.speak")</code></li>
<li>View the definition of the class <code>TextInfo</code>:
<code>openCodeFile(textInfos.TextInfo)</code></li>
<li>View the definition of the method <code>copyToClipboard</code> of the class
<code>TextInfo</code>:
<code>openCodeFile(textInfos.TextInfo.copyToClipboard)</code></li>
<li>View the definition of the class of the focused object:
<code>openCodeFile(focus)</code></li>
<li>Open the file <code>api.py</code> defining the module <code>api</code>:
<code>openCodeFile(api)</code></li>
</ul>
<h3>Python console startup script</h3>
<p>You can define a custom script which will be executed in the Python
console's namespace when it is first opened, or if the add-on is reloaded
(NVDA+F3) after the console has already been opened.</p>
<p>For example, the script allows you to execute new imports and define aliases that you will be able to use directly in the console, as shown below:</p>
<pre><code># Various import that I want in the console.
import globalVars as gv
import core
import ui
# Aliases
ocf = openCodeFile
</code></pre>
<p>The Python console script should be placed in the following location: <code>pathToNVDAConfig\ndtt\consoleStartup.py</code><br />
For example:
<code>C:\Users\myUserName\AppData\Roaming\nvda\ndtt\consoleStartup.py</code></p>
<h2>Log the stack trace of the speech function</h2>
<p>Sometimes, you may want to see which part of the code is responsible for
speaking something. For this, you can enable the stack trace logging of the
speech function pressing NVDA+control+alt+S. Each time NVDA speaks, a
corresponding stack trace will be logged in the log.</p>
<p>Note: You may modify the script's file directly to patch another function.
See all instructions in the file for details on usage.</p>
<p><a id="settings"></a></p>
<h2>Settings</h2>
<p>Some features of the add-on may require a specific configuration.
A settings panel allows to enable them or to control how they work.
To view and modify these settings, go to NVDA menu -> Preferences and select the category NVDA Dev & Test Toolbox.
This settings dialog can also be accessed directly from the Logs Manager dialog.</p>
<p>These settings are global and can only be configured when the default
profile is active.</p>
<p><a id="settingsOpenCommand"></a></p>
<h3>Command to open a file in your favorite editor</h3>
<p>Some features allow to see content in your favorite editor. This includes
the commands to view the source file <a href="http://addons.nvda-project.org/index.zh_CN.html#logReaderOpenSourceFile">from a log</a>
or <a href="http://addons.nvda-project.org/index.zh_CN.html#pythonConsoleOpenCodeFile">from an object in the console</a> as well as
the <a href="http://addons.nvda-project.org/index.zh_CN.html#oldLogsBackup">log manager</a>'s Open button.</p>
<p>To use them, you first need to configure the command that will be called to open the file in your favorite editor.
The command should be of the form:<br />
<code>"C:\path\to\my\editor\editor.exe" "{path}":{line}</code><br />
You should of course modify this line according to the real name and location of your editor and the syntax used by it to open files.
<code>{path}</code> will be replaced by the full path of the file to open and <code>{line}</code> by the line number where you want the cursor to be set.
For Notepad++ for example the command to type in the console would be:<br />
<code>"C:\Program Files\Notepad++\notepad++.exe" "{path}" -n{line}</code></p>
<p><a id="settingsNvdaSourcePath"></a></p>
<h3>NVDA source code path</h3>
<p>When using a command to <a href="http://addons.nvda-project.org/index.zh_CN.html#logReaderOpenSourceFile">view the source file from a log</a> or <a href="http://addons.nvda-project.org/index.zh_CN.html#pythonConsoleOpenCodeFile">from an object in the console</a>, the file may belong to NVDA itself.
If you are not running NVDA from source, your NVDA only contains compiled files.
Thus you may specify here an alternate location where the corresponding source file will be found, e.g. the place where you have cloned NVDA source files, so that a source file can be opened anyway.
The path should be such as:<br />
<code>C:\pathExample\GIT\nvda\source</code><br />
Of course, replace the path of NVDA source with the correct one.</p>
<p>Be sure however that the version of your source file (e.g. GIT commit) is
the same as the one of the running instance of NVDA.</p>
<p><a id="settingsLogsBackup"></a></p>
<h3>Backup of old logs</h3>
<p>The combobox Backup of old logs allows to enable or disable the
<a href="http://addons.nvda-project.org/index.zh_CN.html#oldLogsBackup">feature</a>. If it is enabled, you can also specify below in
"Limit the number of backups" the maximum number of backups you want to
keep. These settings only take effect at next NVDA startup when the backup
takes place.</p>
<h2>Change log</h2>
<h3>Version 6.2</h3>
<ul>
<li>Restores console opening for NVDA < 2021.1.</li>
<li>Addresses potential security issues related to <a>GHSA-xg6w-23rw-39r8</a>
when using the add-on with older versions of NVDA. However, it is
recommended to use NVDA 2023.3.3 or higher.</li>
</ul>
<h3>Version 6.1</h3>
<ul>
<li>Opening the source file of an object located in the submodule of a package
is now working.</li>
<li>Bugfix: The enhanced exit dialog can now be reopened and used as expected
after having been closed. (contribution from Łukasz Golonka)</li>
</ul>
<h3>Version 6.0</h3>
<ul>
<li>While using object navigation commands, a specific object property can be
reported instead of NVDA usual object reporting.</li>
<li>In log reading mode, the "C" key to open a code file from the log now also
works on an input help message.</li>
<li>Bugfix: The add-on can now start successfully when the number of logs to
save is set to its maximum value.</li>
<li>Bugfix: Python console startup script's output does not prevent anymore to
jump to the first result in the console when using result navigation
commands.</li>
<li>Note: From now on, localization updates will not appear anymore in the
change log.</li>
</ul>
<h3>Version 5.0</h3>
<ul>
<li>If Instant Translate add-on is installed, it is now possible to have
speech messages translated on the fly when using log reading commands.</li>
<li>While in log reading mode, pressing E or shift+E now jumps to CRITICAL
erorr messages as well as normal ERROR messages.</li>
<li>New log quick navigation commands have been added to jump to input and to
speech messages.</li>
<li>A new command allow to place a marker in the log; and specific quick
navigation commands in log reading mode allow to jump to them. Credit: the
initial idea for this feature comes from Debug Helper add-on by Luke
Davis.</li>
<li>Bubfix: The memorization of the last error do not fail anymore in some
cases.</li>
<li>Bugfix: The add-on can initialize again with NVDA 2019.2.1.</li>
<li>Bugfix: Log saving feature will not fail anymore with non-ASCII logs.</li>
</ul>
<h3>Version 4.2</h3>
<ul>
<li>Fixed an error with NVDA version below 2021.3.</li>
<li>Fixed the stack trace log formatting.</li>
<li>First localizations.</li>
</ul>
<h3>Version 4.1</h3>
<ul>
<li>Fixed a bug occurring in some situations while logging an error.</li>
<li>The add-on's settings can now be modified only when the default profile is
active to avoid config issues.</li>
</ul>
<h3>Version 4.0</h3>
<ul>
<li>Possibility to back up old logs and introduction of a logs manager.</li>
<li>Added a script to report the last logged error.</li>
<li>Fixed a bug preventing last log message to be read in older NVDA versions.</li>
</ul>
<h3>Version 3.2</h3>
<ul>
<li>Compatibility with NVDA 2023.1.</li>
</ul>
<h3>Version 3.1</h3>
<ul>
<li>Fixed an error occurring when requesting unavailable information on an
object.</li>
</ul>
<h3>Version 3.0</h3>
<ul>
<li>In a log, you can now press C on a message's header line to open the
function/module which has emitted it.</li>
<li>In the console, <code>openCodeFile</code> function can now receive as parameter the
object or a string containing its name.</li>
<li>New feature: NVDA console startup file: If it exists, the file
YourNVDAConfigFolder\ndtt\consoleStartup.py will be executed when NVDA
console is first opened or when add-ons are reloaded.</li>
<li>Various minor fixes for <code>openCodeFile</code> Python console's function and the
command to open the source file corresponding to a line in the log.</li>
<li>Fixed an issue when trying to report roles/states for object explorer in
older version of NVDA.</li>
<li>The add-on does not cause a problem anymore with the tree interceptor when
using UIA in Edge.</li>
</ul>
<h3>Version 2.1</h3>
<ul>
<li>Various bugfixes and code refactoring/cleaning to address all use cases:
all supported versions, installed vs. run from source, etc. (contribution
from Łukasz Golonka)</li>
<li>Rewriting of the compa module (contribution from Łukasz Golonka)</li>
<li>The restart dialog can now be opened only once.</li>
<li>The object explorer shortcuts are now unassigned by default and need to be
mapped by the user.</li>
<li>With the object explorer, a double-press to call the script to report the
current object's property now displays the reported information in a
browseable message.</li>
</ul>
<h3>Version 2.0</h3>
<ul>
<li>New feature: Enhanced restart dialog to specify some extra options when
restarting NVDA.</li>
<li>New feature: extended description mode.</li>
<li>Play error sound feature harmonized between pre and post 2021.3 versions
of NVDA.</li>
<li>New feature: Log reader commands are now available in the log viewer and
also optionally in edit fields or webpages.</li>
<li>New feature: In the Python console, an <code>openCodeFile</code> function is
available to view the source code of an object.</li>
<li>Some features are now disabled in secure mode for security reasons.</li>
<li>The add-on's compatibility range has been extended (from 2019.2 to
2021.1).</li>
<li>Releases are now performed with GitHub action instead of appVeyor.</li>
</ul>
<h3>Version 1.0</h3>
<ul>
<li>Initial release.</li>
</ul>
<p>https://www.nvaccess.org/files/nvda/documentation/userGuide.html#CommandLineOptions</p>
<p>https://www.nvaccess.org/files/nvda/documentation/userGuide.html#PlayErrorSound</p>
<p>https://github.com/nvaccess/nvda/security/advisories/GHSA-xg6w-23rw-39r8#event-132994</p>
TesseractOCR: An OCR add-onhttp://addons.nvda-project.org/addons/tesseractOCR.zh_CN.html2024-02-13T14:38:18Z2023-05-12T09:37:38Z
<ul>
<li>Authors: Rui Fontes, Ângelo Abrantes and Abel Passos do Nascimento Jr.</li>
<li>Updated in 04/05/2023</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=tesseractOCR">stable version</a></li>
<li>Compatibility: NVDA version 2019.3 and beyond</li>
</ul>
<h2>Information</h2>
<p>This add-on uses the free and open source Tesseract OCR engine, to perform
optical character recognition on an image file, PDF, JPG, TIF or other,
without the need to open it.</p>
<p>It also allows access to WIA enabled scanners to perform OCR to a paper
document.</p>
<p>In the NVDA menu, Preferences, a TesseractOCR section is added, where you
can configure the following:</p>
<ul>
<li>languages to be used in recognition;</li>
<li>the type of documents to be recognized;</li>
<li>if should be asked or not a PDF password. If you have this option checked,
and the PDF does not have a password, just press Enter in the dialog
asking for password;</li>
<li>Select the scanner to be used;</li>
<li>set the scanner resolution between 150 and 400 dpi.</li>
</ul>
<p>With the exception of English and Portuguese, which are already included in
add-on, the other languages will be downloaded and installed when you select
a language that does not already exist in the add-on.</p>
<p>Note that as the number of selected recognition languages increases, the OCR
process will take longer.</p>
<p>We therefore recommend that you use only the languages you need.</p>
<p>Note also that the quality of recognition may vary according to the order of
languages.</p>
<p>Therefore, if the recognition result is not satisfactory, you may want to
try another language ordering.</p>
<h2>Shortcut</h2>
<p>The default commands are:</p>
<ul>
<li>Windows+Control+r - to recognize the selected document;</li>
<li>Windows+Control+w - to scan and recognize a document through the scanner;</li>
<li>Windows+Control+c - To cancel the scanning process.</li>
</ul>
<p>Please note: It must be issued before the dialog asking if you want to scan
more pages appear!</p>
<p>Then just wait the browseable message appears with the recognized text.</p>
<p>If you want to preserve the recognized text, don't forget to save it in some
folder, as the results are deleted at the start of the next OCR process!</p>
<p>This commands can be modified in the "Input gestures" dialog in the
"TesseractOCR" section.</p>
<h2>Known problems</h2>
<p>When selecting the "Various" option in the "Documents type" combobox, the
recognized text probably appear with many blank lines</p>
<p>This is a known problem with Tesseract, and, without consumming lots of
processing time, I haven't yet found any solution. But, I still haven't
given up!</p>
<h2>Languages supported</h2>
<p>The supported languages in this version are:</p>
<ul>
<li>Afrikans</li>
<li>Albanian</li>
<li>Amharik</li>
<li>Arabic</li>
<li>Armenian</li>
<li>Assamese</li>
<li>Azerbaijani (Latin)</li>
<li>Basque</li>
<li>Belarusian</li>
<li>Bengali</li>
<li>Bosnian</li>
<li>Breton</li>
<li>Bulgarian</li>
<li>Burnese</li>
<li>Catalan/Valencian</li>
<li>Cebuano</li>
<li>Cherokee</li>
<li>Chinese simplified</li>
<li>Chinese traditional</li>
<li>Corsican</li>
<li>Croatian</li>
<li>Czech</li>
<li>Dannish</li>
<li>Deutch</li>
<li>Dhivehi</li>
<li>Dutch (Flemish)</li>
<li>Dzongkha</li>
<li>English</li>
<li>Esperanto</li>
<li>Estonian</li>
<li>Faroese</li>
<li>Filipino</li>
<li>Finnish</li>
<li>French</li>
<li>Galician</li>
<li>Georgian</li>
<li>Greek</li>
<li>Gujarati</li>
<li>Haitian</li>
<li>Hebrew</li>
<li>Hindi</li>
<li>Hungarian</li>
<li>Icelandic</li>
<li>Indonesian</li>
<li>Inuktitut</li>
<li>Irish</li>
<li>Italian</li>
<li>Javanese</li>
<li>Japanese</li>
<li>Kannada</li>
<li>Kazakh</li>
<li>Khmer (Central)</li>
<li>Kirghiz</li>
<li>Korean</li>
<li>Kurdish Kurmanji</li>
<li>Lao</li>
<li>Latin</li>
<li>Lativia</li>
<li>Lituanian</li>
<li>Luxembourgish</li>
<li>Macedonian</li>
<li>Malay</li>
<li>Malayalam</li>
<li>Maltese</li>
<li>Maori</li>
<li>Marathi</li>
<li>Math / equation detection module</li>
<li>Mongolian</li>
<li>Nepali</li>
<li>Norwegian</li>
<li>Occitan</li>
<li>Oriya</li>
<li>Panjabi</li>
<li>Pashto</li>
<li>Persian</li>
<li>Polish</li>
<li>Portuguese</li>
<li>Quechua</li>
<li>Romanian/Moldave</li>
<li>Russian</li>
<li>Sanskrit</li>
<li>Scottish Gaelic</li>
<li>Serbian (Latin)</li>
<li>Slovak)</li>
<li>Slovenian)</li>
<li>Sindhi</li>
<li>Sinhalese</li>
<li>Spanish</li>
<li>Sundanese</li>
<li>Swahili</li>
<li>Swedish</li>
<li>Syriac</li>
<li>Tajik</li>
<li>Tamil</li>
<li>Tatar</li>
<li>Telugu</li>
<li>Thai</li>
<li>Tibetan</li>
<li>Tigrinya</li>
<li>Tonga</li>
<li>Turkish</li>
<li>Uighur</li>
<li>Ukrainian</li>
<li>Urdu</li>
<li>Uzbek (Latin)</li>
<li>Vietnamese</li>
<li>Welsh</li>
<li>West Frisian</li>
<li>Yiddish</li>
<li>Yoruba</li>
</ul>
<h2>Image types supported</h2>
<p>This add-on supports the following types of files:</p>
<ul>
<li>PDF</li>
<li>jpg</li>
<li>tif</li>
<li>png</li>
<li>bmp</li>
<li>pnm</li>
<li>pbm</li>
<li>pgm</li>
<li>jp2</li>
<li>gif</li>
<li>jfif</li>
<li>jpeg</li>
<li>tiff</li>
<li>spix</li>
<li>webp</li>
</ul>
UnigramPlushttp://addons.nvda-project.org/addons/unigramPlus.zh_CN.html2024-02-13T14:35:58Z2023-05-10T21:27:46Z
<ul>
<li>Author: Kostya Gladkiy (Ukrain)</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=unigramPlus">stable version</a> (Compatible with NVDA 2021.2 to 2023.1)</li>
<li><a href="https://t.me/unigramPlus">Telegram channel</a></li>
<li><a href="https://unigramplus.diaka.ua/donate">Donation link</a></li>
<li>PayPal: gladkiy.kostya@gmail.com</li>
</ul>
<h2>about</h2>
<p>Use Unigram in a more comfortable and productive way. This addon provides
many hotkeys for a quick and comfortable use of Unigram and makes a lot of
small improvements.</p>
<h2>Some of the major improvements are:</h2>
<ul>
<li>Adds a significant improvement to the display of messages such as a poll,
a link, or a message with attached media.</li>
<li>When focus enters the list of chats, it removes such phrases as: "chats,
tab, selected list". And when the focus hits the list of messages, the
phrase "list".</li>
<li>The name and size of the file will be spoken when the cursor is focused on
the "Open File" button or the "Download File" button, and when the cursor
is focused on the play button of the audio file, you will hear its name
and duration.</li>
<li>When focus is placed on a voice message that is currently being played,
first information about the time of its playback is announced, and then
all other information.</li>
<li>When the focus is on a message that contains information about a call, the
duration of this call is announced.</li>
<li>When focusing on a selected message in a chat, you will first hear the
information that it is selected, and then the content of the message.</li>
<li>Now, when moving in the chat, the phrase "Seen" will not be pronounced at
all, and the phrase "Not seen" will be pronounced before the content of
the message. This feature currently only works in English, Russian,
Ukrainian, Spanish, Portuguese, Polish, Croatian, Turkish, and Persian.</li>
<li>Significantly improved the function of recording voice
messages. Recording, sending and canceling the recording of a voice
message are accompanied by characteristic sounds.</li>
<li>Also, when performing these functions, the focus remains in its position
and does not jump to either the record button or the message input field.</li>
<li>If the media attached to the message is opened using the spacebar, then
after closing it, the focus will return to the last element that was in
focus.</li>
<li>The add-on allows you to completely disable the announcement of progress
bars, as well as disable only the announcement of the progress bar for
playing voice messages.</li>
</ul>
<h2>Information about the opportunity to donate to the developer:</h2>
<p>If you really like this add-on and you have the desire, and most importantly
the opportunity, to financially support the developer and thereby motivate
him to further develop this add-on, you can do this by transferring a small
amount to the following bank details: <a href="https://unigramplus.diaka.ua/donate">donation link</a>, or card number is
5169360009004502(Ukraine).</p>
<p>And remember that everyone who read this line thought that someone will
definitely support the developer, but it will not be me.</p>
<h2>Hotkey list:</h2>
<ul>
<li>ALT+1: Move focus to chat list;</li>
<li>ALT+2: Move focus to the last message in an open chat;</li>
<li>ALT+3: Move focus to "unread messages" label;</li>
<li>ALT+D: Move the focus to the edit field. If the focus is already in the
edit field, then after pressing the hotkey, it will move to where it was
before;</li>
<li>ALT+T: Announce the name and status of an open chat;</li>
<li>space: Play/stop the focused voice or video message, or open a media file
attached to the current message;</li>
<li>ALT+P: Play/pause the voice message currently playing;</li>
<li>ALT+S: Increase/decrease the playback speed of voice messages;</li>
<li>ALT+E: Close audio player;</li>
<li>control+C: Copy the message if it contains text. If the focus is on a
link, the link will be copied;</li>
<li>ALT+shift+C: Call if it's a contact, or enter a voice chat if it's a
group;</li>
<li>ALT+shift+V: Press the video call button;</li>
<li>ALT+Y: Accept call;</li>
<li>ALT+N: Press the \"Decline call\" button if there is an incoming call, the
\"End call\" button if the call is in progress, or leave the voice chat if
it is active;</li>
<li>ALT+A: Press \"Mute/unmute microphone\" button;</li>
<li>ALT+C: Press "Enable/disable camera" button;</li>
<li>ALT+Q: Press \"Instant view\" button, if it is included in the current
message;</li>
<li>ALT+O: Press "More Options" button in an open chat, voice chat, or call
window;</li>
<li>ALT+M: Open navigation menu;</li>
<li>control+R: Start/stop voice message recording;</li>
<li>control+D: If pressed once, cancels the recording of a voice message. If
pressed twice, changes the notification type when starting, sending, or
canceling a voice message recording;</li>
<li>ALT+U: Toggle progress bar announcements;</li>
<li>control+P: Open current chat profile;</li>
<li>delete: Delete a message or chat;</li>
<li>shift+delete: Delete message or chat from both sides;</li>
<li>control+ALT+C: Open comments;</li>
<li>Unassigned: Reply to message;</li>
<li>ALT+F: Forward message;</li>
<li>Unassigned: Edit message;</li>
<li>ALT+shift+R: Mark a chat as read;</li>
<li>control+space: Switch to selection mode;</li>
<li>control+shift+C: Copy messages with formatting preserved;</li>
<li>ALT+shift+L: Copy data for broadcasting to the clipboard;</li>
<li>control+ALT+right arrow: Fast forward a voice message.</li>
<li>control+ALT+left arrow: Rewind voice message.</li>
<li>ALT+C: Show message text in popup window.</li>
<li>NVDA+control+U: Open UnigramPlus settings window</li>
<li>ALT+4: Move focus to list of chat folders.</li>
<li>control+shift+A: Press "Attach file" button.</li>
<li>control+N: Press "New chat" button.</li>
<li>Unassigned: Pin a message or chat.</li>
<li>ALT+5: Move focus to open profile.</li>
<li>ALT+L: Enable automatic reading of new messages in the current chat.</li>
<li>NVDA+ALT+R: Convert voice message to text.</li>
<li>Left arrow: Announce the original message, the message that was replied
to.</li>
<li>ALT+6: Move focus to the list of group threads.</li>
<li>ALT+H: Show a list of all UnigramPlus keyboard shortcuts.</li>
</ul>
<h3>Note</h3>
<ul>
<li>All hotkeys can be reassigned in NVDA menu, preferences, input gestures.</li>
<li>The fact that the function that focuses the cursor on the "unread message"
label can sometimes react with a delay is a known issue. This may depend
on the number of cash messages at the moment.</li>
</ul>
<h2>List of changes:</h2>
<h3>Version 4.9.0</h3>
<ul>
<li>Added an option to change the behavior when pressing the up arrow in an
empty message edit field. You can choose from the following options:
activate the function of editing the last sent message, move the focus to
the last message in the chat or do nothing.</li>
<li>Fixed answering and rejecting calls using hotkeys.</li>
<li>Fixed minor issues such as the ALT+H key combination not working And an
issue when the message to which the reply was written was not spoken when
pressing the left arrow.</li>
<li>Fixed display of some elements.</li>
</ul>
<h3>Version 4.8.3</h3>
<p>Fixed an issue that caused the keyboard shortcut to open the navigation menu
to not work.</p>
<h3>Version 4.8.1</h3>
<ul>
<li>UnigramPlus has been adapted to be compatible with the NVDA add-on store
format.</li>
<li>Minor fixes in the English documentation.</li>
</ul>
<h3>Version 4.8.0</h3>
<ul>
<li>Now in the Unigram settings, the settings categories can be opened by
pressing Enter. When you open any category of settings, the focus will be
placed on that category.</li>
<li>Now, when clicking the "Explanation" button in quizzes, the explanation
text will open in a separate window for convenient viewing.</li>
<li>Fixed an issue where chat folder names were not spoken when switching
between them.</li>
<li>Fixed a bug that made it impossible to disable or change the order of
speaking the chat type and name.</li>
<li>Fixed the issue when it was not possible to find out the correct answer in
quizzes.</li>
<li>Fixed the problem with copying a message using the control+shift+C
combination.</li>
<li>Made several minor fixes, improvements, and code optimizations.</li>
</ul>
<h3>Version 4.7.0</h3>
<ul>
<li>UnigramPlus is now adapted to the latest version of Unigram.</li>
<li>Compatibility with NVDA-2023 is now ensured.</li>
<li>The keyboard shortcut ALT+1 now moves focus not only to the chat list, but
also to the contact list and settings section list.</li>
<li>The automatic announcement of new messages in chat, as well as the
announcement of chat actions, have been significantly redesigned,
resulting in improved stability.</li>
<li>A keyboard shortcut has been added to display all UnigramPlus commands. By
default, this function is assigned to ALT+H.</li>
<li>Several minor issues have also been fixed.</li>
</ul>
<h3>Version 4.6.0</h3>
<ul>
<li>Added a keyboard shortcut to move focus to list of group threads. By
default, this function is assigned to the ALT+6 combination. Please note
that often when pressing the enter key on the group that we want to open,
the list of threads may not be displayed and then it is necessary to set
the focus on this group again and press the enter key. As a rule, after
the second press, a list of threads is displayed, and after that we can
press a key combination that will move the focus to this list.</li>
<li>Now the ALT+2 combination moves the focus not only to the list with
messages, but also to the open profile, to the open list of group threads,
or to the open section with settings.</li>
<li>Now in the UnigramPlus settings, you can disable the pronunciation of the
phrases "Admin" and "Owner" on messages in groups.</li>
<li>Hotkeys for accepting and declining calls now work correctly.</li>
<li>Now the automatic announcement feature for new messages and the chat
activity will not turn off when NVDA is restarted, but will work until you
turn it off yourself.</li>
<li>Improved display of some interface elements.</li>
</ul>
<h3>Version 4.5.0</h3>
<ul>
<li>Adapted to the latest version of Unigram</li>
<li>Now if a message was sent in response to another message, by pressing the
left arrow key, you can hear the text of the message in response to which
it was sent</li>
<li>Added French localization</li>
<li>Removed the ability to add reactions to messages with keyboard shortcuts,
since I was unable to adapt this function to changes in the Unigram
interface</li>
<li>Fixed some minor bugs</li>
</ul>
<h3>Version 4.4.0</h3>
<ul>
<li>The function of announcing activity in chats has been added. By default,
this function is activated by double-pressing the ALT+T combination. The
function remains active only until NVDA is restarted.</li>
<li>The function of automatic announcements of new messages in the chat has
been added. By default, this function is activated by pressing ALT+L. The
feature remains active only until NVDA is restarted. There may be
stability issues if too many new messages quicly appear in the chat.</li>
<li>Added a keyboard shortcut for the function of converting voice messages to
text. By default, this function is assigned to the NVDA+ALT+R
combination. Please note that in cases where the voice message is very
long, then the conversion to text takes place in parts. That is, it may
happen that when Unigramplus notifies you that the conversion is complete,
only part of the voice message will actually be converted. And after a few
seconds, this text will be added.</li>
<li>Now, when navigating through the chat list, UnigramPlus reports
information about premium accounts and verified accounts.</li>
</ul>
<h3>Version 4.3.0</h3>
<ul>
<li>Now UnigramPlus works correctly when several chats are open in different
windows.</li>
<li>Added keyboard shortcut to move focus to user profile area if it is
open. The default gesture is alt+5.</li>
<li>Fixed minor bugs.</li>
</ul>
<h3>Version 4.4.0</h3>
<ul>
<li>The mechanism for saving UnigramPlus settings has been significantly
redesigned. Now the settings will not be stored in the NVDA config file,
but will be stored in its own config file. This should solve the problem
when users after an update or just suddenly UnigramPlus stopped working,
due to problems accessing the NVDA config file. Unfortunately, users will
have to re-configure UnigramPlus for themselves, as after installing this
update, all settings will be reset.</li>
<li>Fixed UnigramPlus compatibility issue with BluetoothAudio add-on.</li>
<li>Now the information that the message is not selected will not be
reported. If a message is selected, information about it will be announced
before the message content.</li>
<li>Now the order number of the elements in the chat will be announced if you
have enabled the element position in the NVDA settings.</li>
<li>Added labels to some buttons.</li>
</ul>
<h3>Version 4.1.0</h3>
<ul>
<li>Added a gesture to pin a message or chat. By default, no keyboard shortcut
are assigned to this feature.</li>
<li>Added a keyboard shortcut for pressing the "New conversation" button. The
default gesture for this feature is ctrl+n.</li>
<li>Added a keyboard shortcut for pressing the "Attach media" button. The
default gesture is ctrl+shift+a.</li>
<li>Added a keyboard shortcut to go to the list of chat folders. The default
gesture is alt+4. This feature will be useful for those who use more than
nine chat folders.</li>
<li>Now, when switching between folders using the arrows, the focus will not
jump anywhere.</li>
<li>Now, when switching between folders using hotkeys, in addition to the name
of the active folder, the number of unread chats in this folder will be
announced.</li>
<li>Now features such as "Mark a chat as read" and "Pin a message or chat"
will also work in reverse.</li>
<li>Added Romanian localization.</li>
</ul>
<h3>Version 4.0.0</h3>
<ul>
<li>Provided compatibility with Unigram 8.8. Since the Unigram interface has
changed, I had to rewrite a significant part of the addon code.</li>
<li>Added the ability to rewind and fast forward voice messages. To fast
forward, use the combination control+right arrow, and to rewind, use
control+left arrow.</li>
<li>Now UnigramPlus will report not only the presence of reactions in
messages, but also announce detailed information about reactions.</li>
<li>Added the ability to view the text of the message in the popup window. The
default gesture for this feature is ALT+C.</li>
<li>Added keyboard shortcut to open UnigramPlus settings window. The default
gesture for this feature is NVDA+control+U</li>
<li>Added Czech and Romanian localizations.</li>
<li>Fixed issue with UnigramPlus update for Ukrainian residents.</li>
</ul>
<h3>Version 3.2.3</h3>
<ul>
<li>Added Chinese localization.</li>
<li>Updated existing localizations, including English.</li>
<li>Fixed minor bugs.</li>
</ul>
<h3>Version 3.2.0</h3>
<ul>
<li>Removed features such as "Chat activity tracking" and "Read new messages
in open chat" because I was unable to get them to work properly in NVDA
2022.1.</li>
<li>Improved accessibility of mute / unmute and turn on / off camera in
calls. Now, after pressing the shortcut for both functions, their status
will be announced.</li>
<li>Fixed an issue where the Enter key was not working properly on some
elements. Now you can still record voice messages by holding the Enter key
on the record button.</li>
<li>You can now reassign keyboard shortcuts to features such as "Reply to
message" and "Edit message". You can also assign these functions to keys
such as Enter, Backspace or even left or right arrows, and it won't
interfere with those keys on other items. Note that no keys will be
assigned to these features at first, but you will only be able to assign
them when the focus is on one of the chat messages.</li>
<li>Now the function "Say the sender's name" should work more correctly.</li>
<li>When you focus on a link contained in a message, the message text will not
be spoken first, but the link text will be spoken immediately.</li>
<li>made many small improvements and fixed many bugs and shortcomings.</li>
<li>Now UnigramPlus should run noticeably faster.</li>
</ul>
<h3>Version 3.1.0</h3>
<ul>
<li>Poll announcement has been improved. The names of users who have taken
surveys are now announced in the results window. Polls will also provide
information on which option was correct.</li>
<li>The ability to react to messages has been added, but only in private
chats. This feature will not work properly in groups and channels. In
private chats, by pressing NVD + ALT + numbers from 1 to 5, you can type
the following reactions: 1 - 👍, 2 - 👎, 3 - ❤, 4 - 🔥, 5 - 🥰.</li>
<li>Added the ability to announce information about existing replies to
messages. Unfortunately, it is not yet possible to announce the name of
the available reactions.</li>
<li>Added hotkey to quickly copy data needed for broadcasts.</li>
<li>Fixed an issue with displaying inline results that appeared in the latest
versions of Unigram.</li>
</ul>
<h3>Version 3.0.0</h3>
<p>Warning! UnigramPlus will now support NVDA versions no older than 21.2.0. *
Added labels for many UI elements. * Fixed some bugs.</p>
<h3>Version 2.9.0</h3>
<ul>
<li>Now the edit field will change its label depending on whether we are
replying to the message or editing it.</li>
<li>Added the ability to enable a confirmation dialog for deleting messages or
chats using hotkeys in the settings.</li>
<li>Added Serbian localization.</li>
<li>Fixed small issues.</li>
</ul>
<h3>Version 2.8.0</h3>
<ul>
<li>Added the ability to update the add-on from within the add-on. Now, in
order to check for updates and install them, just open the UnigramPlus
settings and click the appropriate button. You can also enable automatic
check for updates on NVDA startup.</li>
<li>Added Arabic localization.</li>
</ul>
<h3>Version 2.7.0</h3>
<ul>
<li>You will now be notified that the message has been forwarded.</li>
<li>Improved message copy function. Now, if the text contains a clickable link
and the focus is on that link, pressing CTRL+C will copy the link instead
of the entire text.</li>
<li>Added hotkey for copying messages while maintaining text formatting. This
function emulates the activation of the corresponding item in the
application menu. The default hotkey for this feature is
CTRL+shift+C. Because of this feature, the hotkey for opening comments has
been changed to CTRL+ALT+C.</li>
<li>Added the ability to automatically announce new messages in open chat. By
default, it can be enabled by pressing ALT + L.</li>
<li>Added hotkeys for quick viewing of chat messages. Press NVDA + CTRL + the
number corresponding to the number of a particular message in reverse
order, that is, if you want to view the last message, press 1, if you want
to view the previous message, press 2, etc.</li>
<li>Now pressing ALT+T will give you information about the active voice chat
in the current group.</li>
</ul>
<h3>Version 2.6.0</h3>
<ul>
<li>Provided compatibility with NVDA 21.3.</li>
<li>Added hotkey to enable selecting messages or chats.</li>
<li>Added hotkey for forwarding messages.</li>
<li>Added hotkey for marking a chat as read.</li>
<li>Improved performance of the existing features.</li>
</ul>
<h3>Version 2.5.0</h3>
<ul>
<li>There is now a checkbox that, if checked, fixes the voice message
recording issue that some users are experiencing.</li>
<li>Added a hotkey for replying to a message. You can do it by pressing Enter
on the message or you can reassign the alternative hotkeys for this
feature to something else.</li>
<li>Added hotkey for editing messages. The default keyboard shortcut is
ALT+Backspace.</li>
</ul>
<h3>Version 2.4.0</h3>
<ul>
<li>You will now hear the sender's name when focusing on a message.</li>
<li>When focusing on a group chat that contains unread messages, you will be
notified if there are replies for you in that group.</li>
<li>The performance of features added in the previous update has also been
improved.</li>
</ul>
<h3>Version 2.3.0</h3>
<ul>
<li>Improved accessibility of messages containing multiple media
attachments. Previously, the caption of a message containing more than one
media attachment could only be accessed using object navigation. Now this
caption will be read immediately after focusing on such a message.</li>
<li>Improved accessibility of messages containing polls. Now when you focus on
such a message, you will hear the number of people who have already voted,
as well as all the answer options with the result for each option.</li>
<li>Improved accessibility of messages containing URLs. Now, if the URL has a
description, it will also be read, i.e., for example, if the message has a
URL for YouTube, the title and description for that video will be read
right after the URL itself. Also, if the URL is longer than 30 characters,
it will be shortened to make the following description easier to read.</li>
<li>Improved accessibility of the inline query results panel.. To navigate
through the results of inline queries, use the following combinations:
control+up and control+down.</li>
<li>Added hotkey to open comments.</li>
</ul>
<h3>Version 2.2.0</h3>
<ul>
<li>Added hotkey to delete messages or chats just for you and also on both
sides. This function is related to the Unigram interface language, so it
may not work in some localizations. In the settings you can choose the
type of notifications, text or sound.</li>
<li>Added the ability to specify which interface language you use in Unigram
in settings. This is necessary for the correct operation of functions
associated with certain localizations.</li>
<li>Added hotkey to open current chat profile.</li>
<li>Now, after closing a chat, the focus will move to the list of chats, and
not to the button "Open navigation menu".</li>
</ul>
<h3>Version 2.1.0</h3>
<ul>
<li>When switching between folders in the chat list, the name of the current
folder will be announced.</li>
<li>In the chat list, you hear the name of the chat, followed by its type.</li>
<li>Improved the function of moving focus to the list of chats. Now it should
work more accurately and without delays.</li>
<li>Now the add-on settings have become even more flexible, because a section
with some UnigramPlus options has appeared in the NVDA Preferences menu.</li>
<li>Added Polish localization.</li>
<li>Many small fixes and improvements.</li>
</ul>
<h3>Version 2.0.0</h3>
<ul>
<li>The feature where the word "Seen" is not announced and the word "Not seen"
is spoken before the message content is read now works in Spanish,
Portuguese, Croatian, Turkish and Persian localizations.</li>
<li>Improved the function of progress bar announcements. Now, when this mode
is enabled, not all progress indicators are announced, but only those that
are in focus.</li>
<li>If you press the spacebar in a message that contains a file that has not
completed downloading, you will be notified that the download has been
paused.</li>
<li>Added Portuguese localization.</li>
<li>Fixed some small issues and improved performance.</li>
</ul>
<h3>Version 1.9.0</h3>
<ul>
<li>A hotkey has been added that toggles the level of progress bar
announcement between values such as: "Announce all progress bars",
"Announce some progress bars", "Announce all progress bars except the
voice message playback progress bar" and "Do not announce any progress
bars".</li>
<li>For those users who have automatic media downloads disabled in Unigram,
the progress bar announcement level can be set to "Announce all progress
bars except the voice message playback progress bar", and for those who
have it enabled, it is better to set it to "Do not announce progress
bars".</li>
<li>Added Spanish, Croatian and Persian localizations.</li>
<li>Fixed minor bugs from previous versions.</li>
</ul>
<h3>Version 1.8.0</h3>
<ul>
<li>The name and size of the file will be spoken when the cursor is focused on
the "Open File" button or the "Download File" button, and when the cursor
is focused on the play button of the audio file, you will hear its name
and duration.</li>
<li>Added hotkey to move focus to edit field. If the focus is already in the
edit field, then after pressing the hot key, it will move to where it was
before.</li>
<li>The chat activity tracking feature is now enabled by double pressing ALT +
T. You can simply turn it on or turn it on temporarily until the next time
you close the application.</li>
<li>Added the ability to select the type of notification for recording voice
messages. This is done by double pressing the control+d hotkey. There you
can choose between sound, text notification, or return to the standard
voice message recording behavior.</li>
</ul>
<h3>Version 1.7.0</h3>
<ul>
<li>Significantly improved the function of recording voice
messages. Recording, sending and canceling the recording of a voice
message are accompanied by characteristic sounds.</li>
<li>Also, when performing these functions, the focus remains in its position
and does not jump to either the record button or the message input field.</li>
</ul>
<h3>Version 1.7.0</h3>
<ul>
<li>Added the ability to track chat activity. This option can be enabled by
pressing ALT+shift+T and remains active until Unigram is closed or NVDA is
next restarted.</li>
<li>The hotkey that activates the "More Options" button now works in the voice
chat window and the call window.</li>
</ul>
<h3>Version 1.6.0</h3>
<ul>
<li>If the media attached to the message is opened using the spacebar, after
closing it, the focus will return to the last element that was in focus.</li>
<li>Now you can return to the active voice chat not only from the current
group, but also from any other chat.</li>
<li>Pressing ALT+shift+C in an open chat will return you to the voice chat
instead of calling the contact.</li>
<li>If a message has not been sent, you will be notified as soon as that
message has been focused.</li>
<li>If the focused message contains a link, you'll only hear the text of the
link itself, not the entire message.</li>
<li>Fixed an issue where status changes for buttons such as Mute/Unmute Mic
and Enable/Disable Camera were not reported in private calls and voice
chats.</li>
<li>Now the message copy function allows you to copy the contents of items in
the message quick view window.</li>
</ul>
<h3>Version 1.5.1</h3>
<p>This update fixes a huge number of bugs and improves the performance of the
add-on.</p>
<h3>Version 1.5.0</h3>
<ul>
<li>This update adds a hotkey that clicks the "Instant View" button in a
message if included in the message.</li>
<li>By default, this feature is activated with the ALT+Q hotkey.</li>
<li>After opening such an article, the focus will automatically go to the
first element of this article, and after closing, the focus will return to
the last viewed message.</li>
<li>We also fixed an issue where not all article elements in the Instant View
window were readable, even if they contained text content.</li>
</ul>
<h3>Version 1.1.7</h3>
<p>Added Turkish localization.</p>
Thunderbird+http://addons.nvda-project.org/addons/thunderbirdPlus.zh_CN.html2023-08-08T16:02:08Z2023-05-10T20:38:33Z
<ul>
<li>Authors: Pierre-Louis Renaud (From Thunderbird 78 to 102) & Cyrille Bougot
(TB 102), Daniel Poiraud (From TB 78 to 91), Yannick (TB 45 to 60);</li>
<li>URL: <a href="https://www.rptools.org/NVDA-Thunderbird/get.php?pg=manual&lang=en">User manual</a> ; <a href="https://www.rptools.org/NVDA-Thunderbird/get.php?pg=changes&lang=en">History of changes at RPTools.org</a> ; <a href="https://www.rptools.org/NVDA-Thunderbird/toContact.html">Contact
in French or English</a> ;</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=thunderbirdPlus">stable version</a></li>
<li>Download <a href="https://www.rptools.org/?p=8610">Latest version from RPTools.org</a> ;</li>
<li>NVDA compatibility: 2019.3 and later;</li>
<li>Thunderbird compatibility: versions 102.x;</li>
<li><a href="https://github.com/RPTools-org/ThunderbirdPlus/">Source code on gitHub</a></li>
</ul>
<h2>Description</h2>
<p>This add-on greatly improves the Mozilla Thunderbird messaging client's
comfort and efficient use with NVDA.</p>
<p>Improvements relate to the following aspects:</p>
<h3>Auditory Comfort</h3>
<ul>
<li>Alerts such as "so-and-so requested a return receipt" can be deactivated
via an option;</li>
<li>The alerts "This is a draft" and "Thunderbird thinks this message is
fraudulent" are simply dismissed in silence;</li>
<li>Options allow you to disable mailing list names announcement, remove or
group "RE" mentions and clean up the names of correspondents by removing
numbers and other annoying special characters;</li>
</ul>
<h3>Navigating The Main Window</h3>
<ul>
<li>Moving to the next panel is done using the TAB key, while the Escape key
returns to the previous panel. This is more comfortable than through F6
and Shift+F6.</li>
<li>The selection of tabs with Control+Tab and Control+number is spoken as in
this example: Tab 1 of 4, inbox;</li>
<li>A keyboard shortcut allows you to list tabs in a menu in order to easily
activate one of them;</li>
<li>A keyboard shortcut is used to display the context menu of the tabs bar;</li>
</ul>
<h3>The Folder Tree view</h3>
<ul>
<li>Alt+Down Arrow and Alt+Up Arrow let you navigate among folders containing
unread messages;</li>
<li>Typing a letter or number selects the next folder whose name begins with
that character. With the Shift key, the move occurs from bottom to
top. Besides, the name of the account to which the folder belongs is
announced;</li>
<li>Pressing Space bar on a folder containing unread messages selects the
first unread message of the message list;</li>
<li>Two dialogs for accounts and their associated folders allow you to filter
them by keyword or display only folders with unread messages;</li>
</ul>
<h3>The Message List</h3>
<ul>
<li>Choosing columns and their layout within the message list is made
accessible through a simple dialog;</li>
<li>Viewing the columns of the message list: shortcuts allow you to easily
listen to, spell or copy the sender's name, the message subject or its
date by typing a digit on the alphanumeric keypad. For instance, a single
press on 1 or & announces the sender, two presses spell the name and three
presses copy it to the clipboard;</li>
<li>Viewing the headers in the header pane displayed using F8: with Alt+ a
digit, 1 press announces any header containing the sender's addresses or
recipients, 2 presses open a dialog to copy them, 3 presses open the
native Thunderbird context menu associated with the header;</li>
<li>Cleaned quick message text preview via space key, Alt+down arrow or F4:
Large header blocks in message quotes are replaced by the phrase "Sender
name wrote". NVDA will also announce "clickable link" instead of the long
address of the link.</li>
<li>Quick overview of quotes in chronological order, from bottom to top, via
Shift+Space, Alt+up arrow or Shift+F4;</li>
<li>Easy access to attachments using the shortcut Alt+page down or via number
1 of alphanumeric keypad;</li>
</ul>
<h3>Quick Filter Bar And Priority Tag Management</h3>
<ul>
<li>It is possible to navigate filtering options with the vertical arrows. The
Enter key is used to check or uncheck a filter;</li>
<li>Adding or removing tags is done by simply pressing Shift+ a digit on the
alphanumeric keyboard. For example, press Shift+4 to add the "To Do" tag
to a message. You can then filter the message list by tag via the quick
filter bar which is hence accessible;</li>
</ul>
<h3>The Message Write Window</h3>
<p>Alt+1 announces the Sender, Alt+2 announces the Recipient, Alt+3 announces
the Attachments, etc. Two presses place the focus on one of these fields;</p>
<h3>Spell-check Dialog</h3>
<ul>
<li>The misspelled word is announced with or without spelling before the
suggested word. The shortcuts NVDA+Tab or Alt+up arrow announce misspelled
and replacement words: 1 press spells the words at normal speed, 2 presses
spell them quickly, 3 presses copy the misspelled word to the clipboard
for analysis in another edit field;</li>
<li>Various combinations involving the Enter key trigger the Replace, Replace
All, Ignore, Ignore All, or Add Word to Dictionary buttons have been added
for even more convenience within this dialog;</li>
</ul>
<h3>Automatic Update</h3>
<p>ThunderbirdPlus contains an independent auto-update system with
deactivation/reactivation and postponement features;</p>
<h3>Side-to-side Operation with Chichi</h3>
<p>ThunderbirdPlus is designed to work seamlessly with Chichi, an add-on that
installs directly onto Thunderbird.</p>
<p>Read about this on the <a href="https://www.rptools.org/NVDA-Thunderbird/get.php?pg=chichi&lang=en">page of Chichi</a> ;</p>
<p>And many other things that you will discover by reading the <a href="https://www.rptools.org/NVDA-Thunderbird/get.php?pg=manual&lang=en">user manual</a>
;</p>
URL Shortenerhttp://addons.nvda-project.org/addons/urlShortener.zh_CN.html2024-03-10T18:40:21Z2023-04-16T09:27:21Z
<ul>
<li>Author: Noelia Ruiz Martínez</li>
</ul>
<p>This add-on is used to shorten URLs from NVDA through <a href="https://is.gd">is.gd</a>.</p>
<h2>Shorten URL dialog</h2>
<p>Go to NVDA's menu, Tools submenu, and activate the Shorten URL item.</p>
<p>Alternatively, you can assign a gesture from the Input gestures dialog of
NVDA.</p>
<p>The Shorten URL dialog includes the following controls:</p>
<ul>
<li>A list to select one of the saved URLs. From this list, Press shift+tab to
search, and tab to press one of the following buttons.</li>
<li>Copy shortened URL. This can also be activated by pressing Enter from the
URLs list.</li>
<li>A readonly box showing details about the selected URL.</li>
<li>Set of controls to shorten a new URL: Provide the new URL; optionally, you
can set a display name and a custom subfix for the shortened URL. Finally,
press the Shorten URL button.</li>
<li>Rename: opens a dialog to provide a new name to display the selected URL
on the list.</li>
<li>Delete: opens a dialog to delete the selected URL.</li>
<li>Remove saved URLs: opens a dialog to remove the saved URLs from the
configuration folder.</li>
<li>Close.</li>
</ul>
<h2>Changes for 8.0.0</h2>
<ul>
<li>Added a readonly box with details about the selected URL.</li>
</ul>
<h2>Changes for 5.0.0</h2>
<ul>
<li>The new URL dialog has been replaced with a set of controls in the main
dialog, so that the focus can be placed in the relevant field to fix
possible errors.</li>
</ul>
<h2>Changes for 2.0.0</h2>
<ul>
<li>The Shorten URL option won't appear multiple times in Tools submenu when
reloading plugins.</li>
<li>The New URL dialog includes an edit box to provide a custom subfix for the
shortened URL.</li>
</ul>
<h2>Changes for 1.0.0</h2>
<ul>
<li>Initial version.</li>
</ul>
TeleNVDA 远程协助http://addons.nvda-project.org/addons/TeleNVDA.zh_CN.html2024-02-13T14:37:04Z2023-03-28T10:35:29Z
<ul>
<li>Authors: Asociación Comunidad Hispanohablante de NVDA and other
contributors. Original work by Tyler Spivey and Christopher Toth</li>
<li>NVDA 兼容性:2019.3 及更高版本</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=TeleNVDA">稳定版</a></li>
</ul>
<p>注意:为了使需要帮助的用户更容易下载,我们提供了易于记忆且便于传播分享的最新稳定版链接。您可以前往
<a href="https://nvda.es/tele">nvda.es/tele</a> 直接下载插件,无需中间网页。</p>
<p>欢迎使用NVDA
远程协助插件,此插件允许您连接到运行免费NVDA屏幕阅读器的另一台计算机。无论两台电脑就在一间屋里面,还是在地球两端,都没有区别。连接很简单,只需要几步操作。您可以连接到其他人的计算机,或允许受信任的人连接到您的系统以执行日常维护,诊断问题或提供培训。
该插件是 <a href="https://nvdaremote.com">NVDA 远程插件</a> 的修改版,由 NVDA 西班牙社区维护。该插件与 NVDA
Remote 完全兼容。以下是与 NVDA Remote 的差异:</p>
<ul>
<li>选项: 在控制对方计算机时处理语音命令。</li>
<li>An option to mute remote speech when controlling the local machine and
unmute it when controlling the remote machine.</li>
<li>改进了对代理服务器和 TOR 隐藏服务的支持(需
<a href="https://addons.nvda-project.org/addons/proxy.zh_CN.html">代理支持插件</a>)。</li>
<li>支持将 f11 键更改为其他快捷键。目前,这是一个通用手势,因此您可以在“按键与手势”对话框中分配其他快捷键。</li>
<li>a gesture (unassigned by default) to open the addon options</li>
<li>Ability to assign a gesture to the send ctrl+alt+delete option in the
input Gestures dialog. Warning! you shouldn't assighn the ctrl+alt+delete
keys to this option. Doing it will stil work normally, but anytime you
press ctrl+alt+delete keys to send the ctrl+alt+delete to the remote
machine, your own machine will also be affected by the ctrl+alt+delete
function, which is likely not what you expect!</li>
<li>支持完全将下一个首饰交给被控方处理,如果您希望把用于在控制方和被控方之间切换的快捷键发送到被控方,则该特性很有用。</li>
<li>支持在连接了同一会话的用户之间传送小文件(最多 10 MB)。</li>
<li>支持通过 UPNP 转发端口。</li>
<li>支持使用自定义端口检测服务。</li>
<li>一些 GUI 方面的调整。</li>
<li>修复了一些错误。</li>
</ul>
<h2>使用之前</h2>
<p>您需要在两台计算机上安装NVDA 和 TeleNVDA 远程协助插件(下称“远程协助插件”)。</p>
<p>NVDA 和远程协助插件的安装都是基本操作。如果您不会,可以在NVDA的用户指南中找到相关的帮助。</p>
<h2>更新</h2>
<p>更新插件时,如果已在安全桌面上安装了远程协助插件,则建议您也在安全桌面上更新副本。</p>
<p>请先更新现有的插件。然后打开NVDA菜单 > 选项 > 设置 > 常规,并按下“应用以保存的配置到欢迎界面和其他安全界面(需要管理员权限)”的按钮。</p>
<h2>通过中继服务器开始远程会话</h2>
<h3>在被控端的计算机上</h3>
<ol>
<li>打开NVDA菜单 > 工具 > 远程 > 连接。</li>
<li>在第一组单选按钮中选择“客户端”。</li>
<li>在第二组单选按钮中选择允许此计算机被控制。</li>
<li>在主机编辑框中,输入要连接的服务器的主机,例如 nr.nvdacn.com。当某服务器使用其他端口时,您可以用 host:port
的形式填写主机,例如 nvdaremote.com:1234。</li>
<li>在密钥编辑框中输入一个密要,或按下生成密钥按钮。 - 这个密钥是其他人用来控制您的计算机的关键凭证。 -
被控端与控制端需要使用相同的密钥。</li>
<li>按确认。完成后,您将听到提示音,这时就已经连接了。如果服务器包含每日信息,会在对话框中显示。每次连接或仅在第一次连接时,您会看到此对话框,具体取决于中继服务器的设置。</li>
</ol>
<h3>在控制端的计算机上</h3>
<ol>
<li>打开NVDA菜单 > 工具 > 远程 > 连接。</li>
<li>在第一组单选按钮中选择“客户端”。</li>
<li>在第二组单选按钮中选择控制另一台计算机。</li>
<li>在主机编辑框中,输入要连接的服务器的主机,例如 nr.nvdacn.com。当某服务器使用其他端口时,您可以用 host:port
的形式填写主机,例如 nvdaremote.com:1234。</li>
<li>在密钥编辑框中输入一个密要,或按下生成密钥按钮。</li>
<li>按确认。完成后,您将听到提示音,这时就已经连接了。如果服务器包含每日信息,会在对话框中显示。每次连接或仅在第一次连接时,您会看到此对话框,具体取决于中继服务器的设置。</li>
</ol>
<h3>连接安全警告</h3>
<p>如果您连接的服务器没有有效 SSL 证书,您会收到一条连接安全警告。</p>
<p>这可能意味着您的连接不安全。如果您信任此服务器指纹,您可以点击“连接”按钮进行临时连接,或点击“连接且不再询问该服务器”连接并保存指纹。</p>
<h2>直接连接</h2>
<p>“连接”对话框中的“服务器”选项可以让您设置直接连接。</p>
<p>选择此项后,选择您的连接模式(控制另一台计算机还是允许这台计算机被控制)。</p>
<p>对方应该用相反的方式与您建立连接。</p>
<p>选择模式后,您可以使用“获取公网 IP”按钮获取公网 IP地址</p>
<p>如果端口检测服务检测到您的端口(默认为 6837)无法访问,则会显示提示信息。</p>
<p>请转发您的端口,然后重试。另外,请确保允许 NVDA 进程通过 Windows 防火墙。</p>
<p>注意:转发端口、启用 UPNP 或配置 Windows 防火墙的步骤已超出了本文档的范畴。请参阅路由器随附的信息以获取进一步的帮助。</p>
<p>在密钥编辑框中输入密钥,或按下生成按钮。对方需要您的公网
IP和密钥。如果您在端口编辑框中输入了默认端口(6837)以外的端口,请确保另一方将指定的端口正确添加到了主机地址,格式为 公网ip地址:端口。</p>
<p>如果要使用 UPNP 转发所选端口,请选中“使用 UPNP 转发此端口(如果可能)”复选框。</p>
<p>按下确认后,就连接成功了。在对方连接过程中,您可以正常使用远程协助。</p>
<h2>控制远程计算机</h2>
<p>一旦两方连接成功,控制方可以按f11开始控制远程计算机(如,发送键盘按键或盲文输入)。</p>
<p>当NVDA朗读“控制远程计算机”时,您执行的键盘按键和盲文输入将发送到远程计算机。此外,当控制方使用盲文点显器时,也会在点显器上显示来自远程计算机的信息。再次按
f11 可停止控制并切换回本地计算机。您可以在“按键与手势”对话框中分配其他快捷键。</p>
<p>为获得最佳的兼容性,请确保控制方与被控方的 NVDA 使用了相同的键盘布局。</p>
<h2>分享您的会话</h2>
<p>要共享链接以便其他人可以轻松加入您的NVDA 远程会话,请在“远程”菜单中选择“复制链接”。您也可以为此功能分配一个快捷键,从而提高操作效率。</p>
<p>您可以在两种链接格式之间进行选择。第一个同时兼容 NVDA 远程和 TeleNVDA,是目前最推荐的。第二个仅与 TeleNVDA 兼容。</p>
<p>如果您作为控制方,此链接可以让其他人的计算机被控制。</p>
<p>如果您作为被控方,则此链接可以让其他人来控制您的计算机。</p>
<p>得到链接的一方,可以将链接复制到剪贴板,然后使用 Windows + R 打开运行对话框,粘贴以 nvdaremote://
开头的链接并确定,随后按照提示可以控制对方的计算机或者允许对方控制自己的计算机。</p>
<p>请注意,如果从以直接连接模式运行的服务器端复制共享链接,则该共享链接可能无效。</p>
<h2>发送 Ctrl + Alt + Del</h2>
<p>在控制另一台计算机的过程中,无法正常发送 CTRL + Alt + del 快捷键。</p>
<p>If you need to send CTRL+Alt+del, and the remote system is on the secure
desktop, use this command. You can also assighn a gesture for this command
in the input Gestures dialog.</p>
<h2>发送用于在控制方和被控方之间切换的快捷键</h2>
<p>通常当您按控制方和被控方之间切换的快捷键时,不会发送到被控方,因为该快捷键用于在本地计算机和远程计算机之间切换。</p>
<p>如果您需要将此快捷键或任何其他按键发送到被控方,您可以执行“忽略下一个按键指令,将其完全交给被控方处理”。</p>
<p>默认情况下,该功能分配的快捷键是 control + f11 键。您可以在“按键与手势”对话框中分配其他快捷键。</p>
<p>按下该快捷键,下一个按键指令会被忽略,并会原样发送到被控方,也包括这个快捷键。</p>
<h2>远程控制无人值守的计算机</h2>
<p>有时,您可能希望远程控制您自己的另一台计算机。比如您正在外面旅行,此时希望通过手边的笔记本控制家里的计算机,这就特别有用了。又或者,您就在家里,只是想控制另一个房间的计算机。仅需要进行一点额外的准备工作就可以方便地实现无人值守的远程控制。</p>
<ol>
<li>进入NVDA菜单,选择“工具”,然后选择“远程”。最后,找到“选项”按“回车键”打开远程插件的“选项对话框”。</li>
<li>选中“启动时自动连接到控制服务器”复选框。</li>
<li>选择是“使用远程中继服务器”还是“主控服务器”。如果您选中主控服务器,您可以选中“使用 UPNP 转发此端口(如果可能)”尝试使用 UPNP
转发端口。</li>
<li>在第二组单选按钮中选择允许此计算机被控制。</li>
<li>如果您选择“主控服务器”,则要确保在端口编辑框里填入的端口可以被访问(默认端口为6837)。</li>
<li>如果要使用中继服务器,请填写主机和密钥,按“tab键”切换到“确认”按钮,然后按下“回车键”。在这种情况下,“生成密钥”选项不可用。最好输入一个你记的住的密钥,这样你就可以从任何位置轻松使用NVDA
远程了。</li>
</ol>
<p>关于更高级的用法,您还可以设置为“启动后自动连接到控制服务器”,然后在第二组单选按钮中选择“控制另一台计算机”。</p>
<p>注意: 您需要重新启动 NVDA 来使选项对话框中配置的自动连接等选项生效。</p>
<h2>远程计算机静音</h2>
<p>If you do not wish to hear the remote computer's speech or NVDA specific
sounds, simply access the NVDA menu, Tools, and Remote. Arrow down to Mute
Remote, and press Enter. You can assign a gesture to this option from the
NVDA Input Gestures dialog. Please note that this option will not disable
remote braille output to the controlling display when the controlling
machine is sending keys.</p>
<p>You can mute permanently the remote speech while you work on your local
machine by enable that setting from the TeleNVDA category on the NVDA
settings dialog.</p>
<h2>结束远程会话</h2>
<p>要结束远程会话,请执行以下操作:</p>
<ol>
<li>在控制计算机上,按F11停止控制远程机器。您应该听到或在点显器上读到消息:“控制本地计算机”。如果您听到或读到“控制远程计算机”,请再按一次F11。</li>
<li>打开NVDA菜单,然后选择工具,远程,然后找到“断开连接”案回车确认。</li>
</ol>
<p>或者,您可以按<code>NVDA+alt+下翻页</code>直接断开连接。您可以在“按键与手势”对话框中分配其他快捷键。</p>
<h2>发送剪贴板</h2>
<p>远程菜单中的“发送剪贴板”选项允许您从剪贴板中发送文本内容。</p>
<p>使用该功能,剪贴板上的任何文本都会被发送到对方计算机。</p>
<h2>发送文件</h2>
<p>远程菜单中的发送文件选项可以让您向所有会话成员(包括被控机器)发送小文件。请注意,您只能发送小于 10 MB 的文件。不允许在安全屏幕上发送或接收文件。</p>
<p>另请注意,发送文件可能会花费中继服务器的流量,具体取决于文件大小、连接到同一会话的计算机数量以及发送的文件数量。请联系提供中继服务的服务器管理员并询问服务器流量的计费情况。如果流量收费,或非常有限,请考虑使用其他平台来传送文件。</p>
<p>当远程计算机收到文件时,会弹出“另存为”对话框,可以让您选择保存文件的位置。</p>
<h2>配置远程协助在安全桌面上运行</h2>
<p>若使远程协助能够在安全桌面上运行,必须在安全桌面上运行的 NVDA 中安装该远程协助插件。</p>
<ol>
<li>从NVDA菜单中,选择:选项,然后找到常规设置。</li>
<li>选择“应用以保存的配置到欢迎界面和其他安全界面(需要管理员权限)”按钮,然后按下回车键。</li>
<li>对有关复制设置和复制插件的提示选择“是”,并接受可能出现的“用户帐户控制”提示。</li>
<li>复制设置后,点击“确认”按钮。按tab键再找到“确认”按钮后按回车键退出对话框。</li>
</ol>
<p>在安全桌面上安装 NVDA 远程后,您在远程控制过程中,切换到安全桌面时,您也会收到语音和盲文输出。</p>
<h2>清除 SSL 证书指纹</h2>
<p>如果您不再信任已信任的服务器指纹,您可以在“选项”对话框中点击“移除所有已信任的指纹”按钮来清除所有信任过的指纹。</p>
<h2>自定义端口检测服务</h2>
<p>默认情况下,TeleNVDA 使用 NVDA 西班牙社区提供的服务检测开放的端口。您可以从选项对话框更改用于端口检测的服务
URL。确保要检查的端口是自定义 URL 的一部分,并且结果以预期格式返回。TeleNVDA 存储库中包含 Portcheck
的示例脚本,因此您可以根据需要部署自己的端口检测服务。</p>
<h2>修改 TeleNVDA</h2>
<p>该项目受 GNU 通用公共许可证第 2 版或更高版本的保护。您可以 clone <a href="https://github.com/nvda-es/TeleNVDA">该项目</a>以对 TeleNVDA
进行改进,前提是您已阅读、理解并遵守许可条款。 MiniUPNP 模块根据 BSD-3 条款许可证获得许可。</p>
<h3>第三方依赖</h3>
<p>以下可以使用 pip 安装:</p>
<ul>
<li>Markdown</li>
<li>scons</li>
</ul>
<p>为了编译 URL 处理程序,您需要 Visual Studio 2019 或更高版本。</p>
<h3>编译插件以供分发:</h3>
<ol>
<li>打开命令行,转到<a href="https://github.com/nvda-es/TeleNVDA">该项目</a>的目录下。</li>
<li>执行 <strong>scons</strong> 命令。如果没有错误,创建的插件会放置在当前目录中。</li>
</ol>
Nuance Vocalizer serieshttp://addons.nvda-project.org/addons/vocalizer.zh_CN.html2023-05-10T20:38:32Z2023-02-22T16:54:31Z
<ul>
<li>Authors: Nuance Communications (distributor: Tiflotecnia, LDA)</li>
<li>download <a href="https://www.nvaccess.org/addonStore/legacy?file=vocalizerautomotive">Vocalizer Automotive driver</a></li>
<li>download <a href="https://www.nvaccess.org/addonStore/legacy?file=vocalizerexpressive">Vocalizer Expressive driver</a></li>
<li>NVDA compatibility: 2019.3 (2022.1 for Expressive) and later</li>
</ul>
<p>Vocalizer synthesizer series (Automotive and Expressive) are a series of
commercial synthesizers from Nuance Communications, with the add-ons
licensed, packaged, and distributed by Tiflotecnia, LDA. These add-ons
include:</p>
<ul>
<li>Vocalizer Automotive (driver 2.x)</li>
<li>Vocalizer Expressive (driver 3.x)</li>
</ul>
<p>For more information and to purchase the package, visit <a href="https://vocalizer-nvda.com/">Tiflotecnia
website</a>.</p>
Virtual Audio Cablehttp://addons.nvda-project.org/addons/virtualAudioCable.zh_CN.html2023-05-10T20:38:32Z2023-02-21T18:28:24Z
<ul>
<li>Author: Doug Lee.</li>
<li>download <a href="https://www.dlee.org/vac/NVDA/vac.nvda-addon">stable version</a></li>
</ul>
<p>This add-on improves usage of Virtual Audio Cable with NVDA. For more
information about this add-on, visit <a href="https://www.dlee.org/vac/NVDA/">TeamTalk add-on homepage</a>.</p>
Skypehttp://addons.nvda-project.org/addons/skype.zh_CN.html2023-05-10T20:38:32Z2023-02-21T18:28:13Z
<ul>
<li>Author: Doug Lee.</li>
<li>download <a href="https://www.dlee.org/skype/NVDA/skype.nvda-addon">stable version</a></li>
</ul>
<p>This add-on improves usage of Skype with NVDA. For more information about
this add-on, visit <a href="https://www.dlee.org/skype/NVDA/">Skype add-on homepage</a>.</p>
Office Deskhttp://addons.nvda-project.org/addons/officeDesk.zh_CN.html2024-03-23T18:43:00Z2022-10-03T04:51:13Z
<ul>
<li>Authors: Joseph Lee and contributors</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=officeDesk">stable version</a></li>
<li>NVDA compatibility: 2023.1 and later</li>
</ul>
<p>This add-on provides improved support for Microsoft Office applications.</p>
<p>The following Office (sometimes called Microsoft 365) applications are
supported:</p>
<ul>
<li>Word</li>
</ul>
<p>Notes:</p>
<ul>
<li>This add-on requires Windows 10 or later and is optimized for Office 2016
and later, including Microsoft 365 subscription versions.</li>
</ul>
<h2>General</h2>
<ul>
<li>In backstage view, NVDA will announce search count when search results
appear.</li>
</ul>
<h2>Word</h2>
<ul>
<li>NVDA will no longer announce formatting changes such as bold and italic
onoff multiple times.</li>
<li>In Envelopes dialog, NVDA will announce edit field labels.</li>
</ul>
<h2>Version 24.04</h2>
<ul>
<li>NVDA 2023.1 or later is required.</li>
</ul>
<h2>Version 23.02</h2>
<ul>
<li>NVDA 2022.4 or later is required.</li>
<li>Windows 10 21H2 (November 2021 Update/build 19044) or later is required.</li>
</ul>
<h2>Version 23.01</h2>
<ul>
<li>NVDA 2022.3 or later is required.</li>
</ul>
<h2>Version 22.12</h2>
<ul>
<li>Search suggestion sounds are heard once again in NVDA alpha snapshots.</li>
</ul>
<h2>Version 22.10</h2>
<ul>
<li>Initial release.</li>
</ul>
Enhanced Annotationshttp://addons.nvda-project.org/addons/enhancedAnnotations.zh_CN.html2024-02-13T14:38:05Z2022-09-04T19:23:14Z
<ul>
<li>Authors: George Kerscher, Noelia Ruiz Martínez</li>
</ul>
<p>In the DAISY Consortium, best practices are developed for publishers and
authors for providing extended (long) descriptions.</p>
<p>The best practices use the HTML details element that follows the image, or a
link to another file that contains the extended description.</p>
<p>In both options, the user would need to move to the details or the link and
activate it.</p>
<p>Having a keystroke to put focus on the details or the link is ideal.</p>
<p>Our best practices recommend that the details or the link immediately
follows the image, and if the link is followed, a back link to the exact
location must be provided. This makes it certain that the user will not get
lost.</p>
<p>However it is probable that authors in the wild will place the extended
(long) description almost anywhere. In these cases, the user would want to
return to the image and hence the need for a way to return to the original
image.</p>
<p>This add-on provides both features, in support of this <a href="https://github.com/nvaccess/nvda/issues/13940">issue opened in
NVDA's repository</a>.</p>
<h2>Commands</h2>
<ul>
<li>NVDA+alt+d: moves the cursor to the element identified with aria-details.</li>
<li>NVDA+alt+shift+d: moves the cursor to the original element, for example,
an image with furter details like a long description. If NVDA+alt+d has
been pressed several times to move to related annotations, it'll be
possible to go back to each origin.</li>
</ul>
<p>The above commands can be modified from NVDA's menu, Preferences submenu,
Input gestures dialog, Browse mode category.</p>
<h2>Changes for 2.0</h2>
<ul>
<li>Added ability to move back through multiple annotation origins.</li>
<li>Requires NVDA 2023.1 or later.</li>
</ul>
Becky accessibility enhancementshttp://addons.nvda-project.org/addons/Becky.zh_CN.html2024-02-13T14:35:10Z2022-06-27T11:52:54Z
<ul>
<li>Author: Łukasz Golonka <a href="mailto:lukasz.golonka@mailbox.org">lukasz.golonka@mailbox.org</a></li>
<li>NVDA compatibility: 2019.2 and beyond</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=becky-dev">development version</a></li>
</ul>
<p>This plugin improves accessibility of Becky! Internet Mail.</p>
<h2>Keyboard commands:</h2>
<ul>
<li>NVDA+Shift+U - reports amount of all and unread messages in the current
folder</li>
<li>NVDA+Shift+a - in the message composer moves focus to the list of
attachments if it is visible.</li>
</ul>
<p>These shortcuts can be reassigned in the Becky category from the Input
Gestures dialog</p>
<h2>Changes for 0.3-dev:</h2>
<ul>
<li>Compatibility with NVDA 2022.1</li>
<li>Various other bug fixes</li>
</ul>
<h2>Changes for 0.2-dev:</h2>
<ul>
<li>Compatibility with NVDA 2021.1</li>
<li>Added a command to focus list of attachments</li>
<li>Links in the message viewer can now be activated by pressing enter</li>
<li>It should be possible to retrieve amount of unread and all messages even
when Windows taskbar is set to autohidden</li>
</ul>
MathCAThttp://addons.nvda-project.org/addons/MathCAT.zh_CN.html2024-03-24T10:54:44Z2022-06-08T22:52:30Z
<ul>
<li>作者: 尼尔·索伊弗尔(Neil Soiffer)</li>
<li>NVDA 兼容性: 2018.1 或更高版本(未在早期版本中测试)</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=mathcat">稳定版</a></li>
</ul>
<p>MathCAT 旨在最终取代不在被支持的 MathPlayer。MathCAT 从 MathML 生成语音和盲文。MathCAT
生成的数学语音通过韵律进行了增强,使其听起来更自然。语音可以使用与 MathPlayer
相同的命令在三种模式下导航。此外,在盲文显示器上指示导航节点。支持 Nemeth 和 UEB technical 等盲文方案。</p>
<p>MathCAT 有许多控制语音、导航和盲文的配置选项。其中许多可以在 MathCAT 设置对话框中设置 (可从 NVDA
首选项菜单中找到)。有关这些设置的更多信息,请参阅 <a href="https://nsoiffer.github.io/MathCAT/users.html">MathCAT
文档</a>。该文档包含指向 <a href="https://nsoiffer.github.io/MathCAT/nav-commands.html">MathCAT
导航命令表</a> 的链接。</p>
<p>注意: MathCAT 是一个用于从 MathML 生成语音和盲文的通用库。除了 NVDA 之外,其他 AT (辅助工具)项目也在使用。有关
MathCAT 项目的常规信息,请参阅 <a href="https://nsoiffer.github.io/MathCAT">MathCAT 文档主页</a>。</p>
<p>谁应该使用 MathCAT:</p>
<ul>
<li>那些需要高质量 Nemeth 码盲文的人 (MathPlayer 的 Nemeth 码基于 liblouis 的 Nemeth
码一代,有许多技术上难以修复的重大错误)。</li>
<li>需要 UEB technical 盲文的人</li>
<li>那些想要尝试最新技术并愿意通过报告 Bug 来提供帮助的人</li>
<li>那些用 Eloquence 合成器的人</li>
</ul>
<p>谁不应该使用 MathCAT:</p>
<ul>
<li>任何使用非英语语言的 MathPlayer 的人 (存在印度尼西亚语和越南语翻译; 更多翻译将会在未来推出)。</li>
<li>任何使用 MathPlayer 的非 Nemeth 码、 UEB 盲文输出的人 (如果您想帮助进行盲文翻译,请联系我)</li>
<li>任何喜欢 Access8Math 而不是 MathPlayer 的人 (需要使用语音或其他更多功能的人)</li>
</ul>
<p>MathCAT 的语音规则还没有 MathPlayer 的规则那么全面——这可能是坚持使用 MathPlayer 的另一个原因。MathCAT 被用作
MathML 4 思想的测试平台,它允许作者表达他们的意图,以便能够正确地说出不明确的符号,而不是猜测。我没有添加太多规则,因为 MathCAT
的体系结构以使用和推断作者意图为中心,这些还没有完全解决。</p>
<h2>MathCAT 更新日志</h2>
<h3>版本 0.5.0</h3>
<ul>
<li>添加了德语 LaTeX 盲文代码。与其他盲文代码不同,这会生成 ASCII 字符,并使用当前盲文输出表将字符转换为盲文。</li>
<li>增加了(实验) ASCII Math 盲文码。与 LaTeX 盲文代码一样,它生成 ASCII 字符,并使用当前盲文输出表将字符转换为盲文。</li>
<li>添加了<code>CopyAs</code>首选项,支持在关注 MathML 时使用 ctrl+C 复制为 MathML、LaTeX 或 ASCII
Math(如前所述)。将复制当前关注的节点。注意:这仅列在 prefs.yaml 文件中,并且尚未在 “MathCAT首选项” 对话框中公开。</li>
</ul>
<h3>版本 0.4.2</h3>
<ul>
<li>修复了语音变化且 MathCAT 语言为“自动”时的语言切换问题</li>
<li>添加了更多 $Impairments 检查,以在未为盲人设置时提高阅读能力</li>
<li>Nemeth:修复了“~”不是 mrow 的一部分时的问题</li>
<li>UEB: character additions, "~" spacing fix if prefix, xor fix,</li>
<li>对重音元音的 MathML 清理(主要针对越南语)</li>
<li>首选项读取/更新代码的重大重写,速度大大加快--添加了<code>CheckRuleFiles</code>前缀以控制检查哪些文件进行更新</li>
<li>Added two new interface calls -- enables setting the navigaton location
from the braille cursor (not part of MathCAT addon yet)</li>
</ul>
<h3>版本 0.3.11</h3>
<ul>
<li>升级到 python 3.11,并验证可以与 NVDA 2024.1 一起工作</li>
<li>修复越南语盲文和语音中的错误,主要用于化学。</li>
<li>修复当盲文代码和相关语言不匹配时停止工作的问题(特别是越南盲文和越南语语音)</li>
<li>修复了 HTML 标记内部的空白错误</li>
<li>改进了罗马数字检测</li>
</ul>
<h3>版本 0.3.9</h3>
<ul>
<li>增加了繁体中文翻译(感谢 Hon-Jang Yang)</li>
<li>Fixed bug with navigating into the base of a scripted expression that has
parenthesis</li>
<li>显著改变了空白的处理方式。这主要影响盲文输出(空白和“省略”检测)。</li>
<li>完善了对化学的识别</li>
<li>添加化学示例后产生的UEB盲文修复</li>
<li>UEB 修复了在某些情况下添加辅助括号的问题</li>
</ul>
<h3>版本 0.3.8</h3>
<p>盲文:</p>
<ul>
<li>对话已经国际化(非常感谢翻译者们!)</li>
<li>CMU 的初步实施——CMU 盲文码在西班牙和几个葡萄牙语国家使用</li>
<li>修复了一些 UEB 错误,并为 UEB 添加了一些字符</li>
<li>越南盲文的重大改进</li>
</ul>
<p>其他修复:</p>
<ul>
<li>更改相对速率对话框滑块,使其最大值为 100% (现在只允许设置较慢的语速)。此外,增加了步长,因此更容易显著提高/降低语速。</li>
<li>修复了当相对速率改变时有时会中断语音的 espeak 错误</li>
<li>越南语语音的改进</li>
<li>修正了 OneCore 语音说 “a” 的错误</li>
<li>修复了<code>AutoZoomOut</code>为 False (非默认值) 时的一些导航错误</li>
<li>修复了围绕语言更改和其他一些对话框更改的更新,以便它们在单击“应用”或“确认”后立即生效。</li>
<li>添加了“使用语音的语言”选项,这样 MathCAT 就可以使用正确的语言(如果有翻译的话)</li>
<li>有关清理 MathML 码的几个改进</li>
</ul>
<h3>版本 0.3.3</h3>
<p>此版本修复了许多错误。主要的新功能和错误修复如下:</p>
<ul>
<li>添加了西班牙语翻译 (感谢 Noelia Ruiz 和 María Allo Roldán)</li>
<li>修改导航以便于在一个级别内开始放大</li>
<li>添加了 ctrl+alt+箭头键用于导航表格结构。这些按键应该很容易记忆,因为它们与 NVDA 在使用的导航表格按键很类似。</li>
<li>解决了 NVDA 的 eSpeak 语音的错误,当相对数学语速设置为低于文本语速时,该错误会导致语音减慢。</li>
<li>解决了 OneCore 的语音问题,以便于它们能说出长 “a” 音。</li>
</ul>
<p>语音有一些小的调整, Nemeth 码和 UEB 有一些错误修复。</p>
<p>注: 现在可以选择将越南的盲文标准作为盲文输出。这仍然是一项正在进行的工作,并且存在太多的 bug,不能用于测试之外的其他用途。我预计下一个
MathCAT 版本将包含一个可靠的实现。</p>
<h3>版本 0.2.5</h3>
<ul>
<li>进一步化学改进</li>
<li><p>对 Nemeth 码的修复:</p>
<ul>
<li>增加了省略规则</li>
<li>增加了一些英语语言指示符的规则</li>
<li>添加了更多需要多用途指示符的情况</li>
<li>Nemeth 码标点相关的修复</li>
</ul>
</li>
</ul>
<h3>版本 0.2</h3>
<ul>
<li>大量错误修复</li>
<li>改善语音</li>
<li>一个首选项用于控制暂停持续时间 (适用于数学中相对语速的更改)</li>
<li>支持识别并是当说出化学符号</li>
<li>印尼语和越南语翻译</li>
</ul>
Speech Loggerhttp://addons.nvda-project.org/addons/speechLogger.zh_CN.html2024-03-22T17:51:48Z2022-05-24T08:27:00Z
<h3>NVDA Speech Logger add-on</h3>
<ul>
<li>Author: Luke Davis, with contributions by James Scholes</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=speechLogger">stable version</a></li>
<li>NVDA compatibility: 2019.3.1 and later</li>
</ul>
<p>An <a href="https://nvaccess.org/">NVDA</a> add-on to log speech to a file or files. It can log speech
generated on the local machine into a text file. It can also log speech
from a remote machine received through the <a href="https://nvdaremote.com/">NVDA Remote</a> add-on, either
to the same or a different file.</p>
<h3>Configuration</h3>
<p>To configure this add-on, open the NVDA menu, go to Preferences, then
Settings, then Speech Logger (NVDA+N, P, S, then press S until you get
there, on a default U.S. English keyboard). There is also an unassigned
gesture in the Input Gestures "Configuration" category, which you can assign
and use to quickly open the add-on's settings directly. Note: the add-on
can only be configured while in the Normal Configuration profile of NVDA.
The add-on is not profile-aware. If you can think of some use case that
requires it to operate differently in different profiles, please contact the
author or file an issue on the <a href="https://github.com/opensourcesys/speechLogger/issues/new">GitHub repo</a>.</p>
<h3>The following settings are available:</h3>
<ul>
<li>The log directory. You can enter or browse for your desired destination
directory, which must already exist. System variables such as %temp%,
%userprofile%, etc., can be used in this field.</li>
<li>Local log filename. The created file will be placed in the above
directory. This will contain speech logged while the local log mode is
engaged. This can be the same as the remote log file. Leave blank to
disable this kind of logging completely.</li>
<li>Remote log filename. The created file will be placed in the above
directory. This will contain speech logged while the remote log mode is
engaged. It can be the same as the local log file. Leave blank to disable
this kind of logging completely.</li>
<li>Separator. This combobox lets you choose one of the available utterance
separators. See below for more information.</li>
<li>Custom separator. This field lets you enter a custom utterance separator
(see below), which is used if "custom" is chosen in the combobox.</li>
<li>Timestamp mode. This combobox allows you to choose between no timestamps,
and a timestamp at the start and end of each log session.</li>
<li>Log speech during say-all (read to end) mode. This add-on logs speech
generated when you press NVDA+DownArrow (NVDA+a in laptop layout). If you
would rather not have that kind of narrative long reading logged, un-check
this box.</li>
<li>Begin logging at startup. You can set this option to "Always", if you want
speech to be logged automatically when NVDA starts. This only applies to
local speech, and the default is "never".</li>
</ul>
<h4>Utterance separator</h4>
<p>When NVDA speaks something such as "<code>recycle bin 1 of 55</code>" while it's
reading your desktop, this is considered two separate utterances. The first
one is the item name ("<code>Recycle bin</code>", in this example), and the second is
the object position information ("<code>1 of 55</code>", in this example).</p>
<p>Depending on what you are reading, and how you have NVDA configured, there
can be several separate utterances that happen during a single speech
sequence.</p>
<p>In the normal NVDA log at debug level, each individual utterance is
separated with two spaces, as it is written in the example above.</p>
<p>Speech Logger allows you to separate utterances in the same way NVDA does
(with two spaces), or by one of a few reasonable alternatives (a newline, a
comma and a space, a tab, two underscores), or by a custom sequence of your
own devising.</p>
<p>If, for example, you wanted your utterance separator to be two dollar signs
(<code>$$</code>), you would set the combobox to "custom", and enter "<code>$$</code>" (without
the quotes), in the custom separator field. If you wanted it to be a
newline followed by a tab, you could enter "<code>\n\t</code>".</p>
<h3>Controls:</h3>
<p>This add-on has two keyboard shortcuts set by default, and one that is
unassigned.</p>
<p>The default gestures, which you can change in the NVDA Input Gestures
"<code>Speech Logger</code>" category, are:</p>
<ul>
<li>NVDA+Alt+L: start/stop logging of local speech.</li>
<li>NVDA+Shift+Alt+L: start/stop logging of remote speech.</li>
</ul>
<p>These are listed as "Toggles logging of local speech" and "Toggles logging
of remote speech", respectively.</p>
<p>Additionally, it has one unassigned gesture for opening its configuration
panel, which you may assign from the <code>Speech Logger</code> category in NVDA's
Input Gestures.</p>
<h3>A note on remote speech logging</h3>
<p>This add-on is intended to work with the NVDA Remote add-on, for logging of
remote speech.</p>
<p>It is important to know, that it is not possible to start logging for remote
sessions until you actually start one. There is no way to, for example,
start logging, and have it wait, on stand-by, until a remote session starts,
and begin logging at that time.</p>
<p>However, once started, logging will continue across remote sessions.</p>
<h3>Feedback and feature requests</h3>
<p>If you would like to suggest a feature or report a bug, please reach out by
email, or file an <a href="https://github.com/opensourcesys/speechLogger/issues/new">issue</a>.</p>
<p>If you find this add-on useful, it would really help if you could <a href="https://github.com/nvaccess/addon-datastore/discussions/2636">leave a
review</a>.</p>
<p>As always, I appreciate hearing that my add-ons are helpful, and finding out
what people are using them for.</p>
Cursor Locatorhttp://addons.nvda-project.org/addons/cursorLocator.zh_CN.html2024-02-13T14:37:11Z2022-05-23T06:31:52Z
<ul>
<li>Authors: Noelia Ruiz Martínez, Sergio Gómez Codina.</li>
</ul>
<p>此插件可以在文档或多行控件中输入文本时了解系统输入焦点相对于当前行开头的位置。</p>
<p>此功能取决于应用程序的视觉外观。因此,您可能需要禁用对行的调整或为不同的程序配置插件。</p>
<h2>Cursor Locator 设置</h2>
<p>此面板可从 NVDA 的菜单、选项子菜单、设置对话框中找到。</p>
<p>它提供以下选项:</p>
<ul>
<li>提示行长度:您可以输入或选择行长度(字符数介于 0 到 600 之间),达到时会以高音宣布。 (默认值为 80 个字符)。</li>
<li>行首提示的最大哔声次数:您可以键入或选择 0 到 600 之间的值。默认值为 0。</li>
<li>行尾提示的最大哔声次数:您可以键入或选择 0 到 600 之间的值。默认值为 0。</li>
<li>行首提示的音高:您可以键入或选择一个介于 20 和 20000 之间的值。(默认值为 400 赫兹)。</li>
<li>行首提示的声音长度:您可以键入或选择一个介于 20 和 2000 之间的值。(默认值为 50 毫秒)。</li>
<li>测试行首声音:按下此按钮可测试配置的行首声音。</li>
<li>行尾提示音高:您可以键入或选择一个介于 20 和 20000 之间的值。(默认值为 1000 赫兹)。</li>
<li>行尾提示的声音长度:您可以键入或选择一个介于 20 和 2000 之间的值。(默认值为 50 毫秒)。</li>
<li>测试行尾声音:按下此按钮可测试配置的行尾声音。</li>
</ul>
<h2>命令</h2>
<p>您可以通过 NVDA 的菜单、选项子菜单、按键与手势对话框将手势修改为以下命令:</p>
<ul>
<li>NVDA+control+shift+l:如果可能,报告当前行的长度(系统输入焦点)。</li>
<li>未分配:显示 Cursor Locator 设置对话框(配置)。</li>
</ul>
<h2>3.0 的变化</h2>
<ul>
<li>兼容 NVDA 2023.1。</li>
</ul>
<h2>2.0 的变化</h2>
<ul>
<li>添加了在到达行尾和行首时重复提示的功能。</li>
<li>在 Windows 11 上添加了对 Office 文档和记事本的支持。</li>
</ul>
<h2>1.0 的变化</h2>
<ul>
<li>初始版本</li>
</ul>
Screenshots wizardhttp://addons.nvda-project.org/addons/screenshots.zh_CN.html2024-02-13T14:36:29Z2022-04-27T17:44:53Z
<ul>
<li>Author: Javi Domínguez.</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=scrsw">stable version</a>, compatible with NVDA 2021.2 and beyond.</li>
</ul>
<p>This add-on provides a wizard to take screenshots of the entire screen or
specific areas such as objects, windows, etc. It is activated by the <em>print
screen</em> key which on standard keyboards is usually the first of the group of
three to the right of F12. If you prefer to use another, it can be
configured in the NVDA preferences, input gestures.</p>
<p>When the wizard is invoked, a virtual rectangle is created around the object
with focus and a layer of keyboard commands is activated with the following</p>
<h2>commands</h2>
<ul>
<li>F1 presents an help message with basic commands; pressing twice opens this
document.</li>
</ul>
<h3>Rectangle information</h3>
<p>Keys 1 through 7 provide the following information:</p>
<ul>
<li>1: Coordinates of the upper left and lower right corners.</li>
<li>2: Rectangle dimensions, width per height.</li>
<li>3: The reference object.</li>
<li>4: Proportion of the rectangle area occupied by the reference object.</li>
<li>5: Indicates if part of the reference object is outside the rectangle.</li>
<li>6: Indicates if the rectangle exceeds the limits of the active window in
the foreground.</li>
<li>7: Proportion of the screen occupied by the rectangle.</li>
</ul>
<p>The space key reads all this information in a row.</p>
<h3>Object selection</h3>
<p>The reference object is the object on the screen that is delimited by the
rectangle at all times. First, this object will be the one with the focus of
the system, but another can be selected with the following keys:</p>
<ul>
<li>Up arrow: frames the container of the current object.</li>
<li>F: Frames the object with the focus.</li>
<li>N: Frames the object in the objects navigator.</li>
<li>W: Frames the active window.</li>
<li>M: frames the object under the mouse pointer.</li>
<li>S: Frames the entire screen.</li>
</ul>
<p>With down arrow the changes are undone.</p>
<h3>Rectangle size</h3>
<p>The size of the rectangle can be modified using the following keys:</p>
<ul>
<li>With shift + arrows the upper left corner is moved:</li>
<li>shift + up or down arrow moves the top edge,</li>
<li>shift + left or right arrow moves the left edge.</li>
<li>With control + arrows the lower right corner is moved:</li>
<li>control + up or down arrow moves the bottom edge,</li>
<li>control + left or right arrow moves the right edge.</li>
<li>control + shift + up arrow expands the rectangle, moving all four edges
outward.</li>
<li>control + shift + down arrow contracts the rectangle, moving all four
edges inward.</li>
</ul>
<p>The number of pixels for these movements can be changed with the page up and
page down keys. Also in preferences.</p>
<p>By resizing the rectangle the reference object may change. It will always
try to select the object that is centered, in the foreground and that
occupies a larger area within the rectangle. Object changes will be
announced when they occur.</p>
<h3>Capture the image</h3>
<p>Enter key captures the image of the screen area delimited by the rectangle,
it is saved in a file and exits.</p>
<p>Escape key cancels and exits.</p>
<h2>Settings</h2>
<p>In NVDA preferences, options, the following settings can be configured:</p>
<ul>
<li>The folder where the files will be saved. The user's documents folder by
default.</li>
<li>The image file format.</li>
<li>The action after saving (nothing, open the folder or open the file).</li>
<li>The number of pixels for each movement.</li>
</ul>
NVDA 代理支持http://addons.nvda-project.org/addons/proxy.zh_CN.html2023-07-15T02:39:11Z2022-04-27T09:43:44Z
<ul>
<li>作者: Jose Manuel Delicado</li>
<li>NVDA 兼容性:2022.4 及更高版本</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=proxy">稳定版</a></li>
</ul>
<p>此插件允许 NVDA 屏幕阅读器通过一个或多个代理服务器连接到互联网。为了实现这一点,它将各种补丁应用于标准 Python
库或修改某些环境变量,具体取决于所选的配置。只要您的组织代理服务器允许,您将能够从您的公司环境自动更新 NVDA 及其插件,甚至可以执行远程会话。</p>
<h2>功能</h2>
<ul>
<li>支持各种代理服务器类型:http、socks4 和 socks5。</li>
<li>能够通过代理服务器重定向所有流量或仅重定向特定流量(http、https、ftp)。</li>
<li>能够通过代理服务器重定向所有流量,然后通过其他服务器(嵌套代理)重定向特定流量。</li>
<li>配置文件切换和重置:如果您通常使用 NVDA 的便携版,您可以为不同的环境(家庭、工作、办公室等)创建各种配置文件并手动激活它们。</li>
</ul>
<h2>用法</h2>
<p>此插件向 NVDA
设置对话框添加了一个名为“代理”的新类别。在此类别中,您将找到四个设置组。第一个允许您为所有流量配置通用代理。其他组允许您仅为特定协议配置代理服务器。所有组都有以下字段:</p>
<ul>
<li>主机:代理服务器的主机名或IP地址。留空以禁用该特定代理。</li>
<li>端口:服务器端口。</li>
<li>用户名:可选,服务器身份验证的用户名。</li>
<li>密码:可选,服务器身份验证的密码。请注意,socks4 服务器不需要密码。</li>
</ul>
<p>除了前面的字段外,第一个设置组中还提供以下选项:</p>
<ul>
<li>SOCKS 代理类型:可以选择socks4、socks5 或 http。</li>
<li>如果可能,为 dns 请求使用代理:选中此复选框后,主机名或域名将直接发送到代理服务器并在其上解析。取消选中时,名称将在本地解析,服务器将仅接收目标
IP 地址。请注意,并非所有 socks4 代理服务器都支持此选项。</li>
</ul>
<p>通常,大多数用户只需配置第一个设置组。如果您不知道您的代理详细信息,请咨询您的组织网络管理员以获取更多信息。</p>
<h2>限制</h2>
<ul>
<li>非常有限的 IPV6 支持。</li>
<li>并非所有代理服务器都支持 UDP 流量。</li>
<li>外部 DLL 库不会遵守此插件中配置的设置。</li>
<li>http 代理服务器仅支持基本身份验证。不支持摘要式身份验证。</li>
<li>为了通过 http 代理重定向所有流量(包括 https 连接),服务器必须支持 CONNECT http 方法。</li>
<li>无法配置“直接连接”模式。如果禁用特定代理,则将使用系统默认值。</li>
</ul>
<h2>更新日志</h2>
<h3>版本 1.2</h3>
<ul>
<li>兼容 NVDA 2023.1。</li>
<li>出于安全考虑,将兼容的最低 NVDA 版本设置为 2022.4。</li>
<li>更新了翻译。</li>
</ul>
<h3>版本 1.1</h3>
<ul>
<li>兼容 NVDA 2022.1。</li>
<li>出于安全考虑,将兼容的最低 NVDA 版本设置为 2021.3。</li>
<li>选中“如果可能,对 dns 请求使用代理”复选框并配置通用代理时修复 socket.getaddrinfo 功能。</li>
</ul>
<h3>版本 1.0</h3>
<ul>
<li>初始发行。</li>
</ul>
NVDA 更新通道选择器http://addons.nvda-project.org/addons/updateChannel.zh_CN.html2023-10-15T16:25:29Z2022-04-27T09:43:44Z
<ul>
<li>作者: Jose Manuel Delicado</li>
<li>NVDA 兼容性:2022.4 及更高版本</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=updateChannel">稳定版</a></li>
</ul>
<p>此插件允许您下载并安装所选通道的最新 NVDA 版本,而无需访问任何网页或使用 Web 浏览器。例如,当您想要测试 NVDA
快照中的新功能,然后返回到最新的稳定版本时,此插件将很有用。如果您定期测试 NVDA
快照,并且通常将其安装在您的计算机中,则使用此插件可以节省大量时间。如果您喜欢在便携版中测试快照,并保持已安装的 NVDA 副本不变,则此插件也适合您。</p>
<h2>用法</h2>
<p>您可以通过转到 NVDA菜单、选项、设置、Update channel
类别来更改NVDA更新通道。选择所需通道并点击“确定”后,等待下一次自动检查更新,或转到 NVDA
帮助菜单并选择“检查更新”选项。以下是可用的更新通道:</p>
<ul>
<li>默认:这是您的 NVDA 版本使用的默认更新通道。选择此选项意味着与禁用此插件相同。</li>
<li>稳定版:这是稳定版的默认更新通道。当您想从测试快照返回到稳定版本时很有用。</li>
<li>Rc and beta: this is the channel for beta releases. You will receive the
first beta version once it is released. This channel allows you to update
through betas and release candidates.</li>
<li>Alpha(快照):选择此选项可更新到最新的 Alpha。 Alpha 快照允许您测试新功能,但它们非常不稳定。请慎用。</li>
<li>禁用更新(不推荐):此选项禁用更新通道。如果检查更新,将显示错误消息。请注意,您可以从“常规设置”类别禁用自动更新。此选项仅用于测试目的。</li>
</ul>
<p>打开设置面板后,将在后台检索有关每个通道的可用更新信息。按 Tab
导航到只读编辑框,您可以在其中查看此信息。当您从组合框中更改更新通道时,此信息将动态更新。如果所选通道有可用更新,则编辑框旁边将显示一个或两个链接:</p>
<ul>
<li>下载:在此链接上按空格键可在您的 Web 浏览器中打开并下载最新的安装程序。</li>
<li>查看更新日志:在此链接上按空格键可在您的 Web 浏览器中打开更新日志文档。对于某些通道,将不会显示此链接。</li>
</ul>
<h2>更新日志</h2>
<h3>1.4 版</h3>
<ul>
<li>更新翻译。</li>
<li>兼容 NVDA 2023.1。</li>
<li>出于安全考虑,将兼容的最低 NVDA 版本设置为 2022.4。</li>
</ul>
<h3>1.3 版</h3>
<ul>
<li>更新翻译。</li>
<li>修复了无法从 alpha 快照创建便携版的错误。</li>
</ul>
<h3>1.2版</h3>
<ul>
<li>更新翻译。</li>
<li>兼容 NVDA 2022.1。</li>
<li>出于安全考虑,将兼容的最低 NVDA 版本设置为 2021.3。</li>
<li>解决了 NV Access 服务器中返回信息的一个错误,该错误导致从 alpha 版更新到稳定版时会更新为 2019.2.1。</li>
</ul>
<h3>1.1 版</h3>
<ul>
<li>移除不支持的通道。</li>
<li>更新翻译。</li>
<li>在设置面板中添加了当前可用更新的信息。</li>
</ul>
<h3>1.0 版</h3>
<ul>
<li>初始版本。</li>
</ul>
应用程序字典http://addons.nvda-project.org/addons/applicationDictionary.zh_CN.html2023-05-10T20:38:33Z2022-03-28T04:38:39Z
<h2>Informations</h2>
<ul>
<li>Authors: Rui Fontes and Ricardo M. Leonarczyk with colaboration of Cyrille
Bougot</li>
<li>Version: 2022.03.26</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=applicationDictionary">稳定版</a></li>
<li>Compatibility: NVDA 2019.3 and beyond</li>
</ul>
<h2>Usage</h2>
<p>这个插件可以为 NVDA 创建特定于应用程序的字典。
要使用该插件,只需切换到您想要添加字典的应用程序,然后按 NVDA+control+shift+d。 将打开您熟悉的 NVDA
字典对话框,您可以添加仅对该应用程序生效的字典条目(应用程序名称会出现在该对话框的标题中)。 可以通过 NVDA
的“按键与手势”对话框更改插件的默认快捷键:在“配置”分类下,找到“打开特定应用程序的字典对话框”按下添加按钮。</p>
<h2>Command</h2>
<p>NVDA+Control+Shift+d</p>
<h2>自动更新</h2>
<p>This add-on includes an automatic update feature. The check for a new
version will be executed everytime NVDA is loaded. If you want this, go to
NVDA, Preferences, Options and in the add-on category check the check box.</p>
Sound Splitterhttp://addons.nvda-project.org/addons/soundSplitter.zh_CN.html2023-05-10T20:38:32Z2022-01-31T02:30:36Z
<ul>
<li>Authors: Joseph Lee, Luke Davis and contributors</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=soundSplitter">stable version</a></li>
<li>NVDA compatibility: 2022.4 and later</li>
</ul>
<p>This add-on, partly based on Tony's Enhancements by Tony Malykh, adds the
ability to split audio from NVDA and other sounds onto separate audio
channels.</p>
<p>Note: this add-on is not intended to be used in secure screens.</p>
<h2>Commands:</h2>
<ul>
<li>Alt+NvDA+S: toggle sound splitter between enabled with NVDA on the right
channel, NVDA on the left channel, or disabled.</li>
</ul>
<h2>Sound Splitter settings</h2>
<p>You can configure add-on settings from NVDA menu/Preferences/Settings/Sound
Splitter category.</p>
<ul>
<li>Split NVDA sound and applications' sounds into left and right channels:
checkinb this checkbox will enable sound splitting feature.</li>
<li>Switch left and right during sound split: by default, NVDA will be heard
through the right channel if sound splitting is on. You can instead hear
NVDA through the left channel by checking this checkbox.</li>
</ul>
<h2>Version 23.02</h2>
<ul>
<li>NVDA 2022.4 or later is required.</li>
<li>Windows 10 21H2 (November 2021 Update/build 19044) or later is required.</li>
</ul>
<h2>Version 23.01</h2>
<ul>
<li>NVDA 2022.3 or later is required.</li>
<li>Windows 10 or later is required as Windows 7, 8, and 8.1 are no longer
supported by Microsoft as of January 2023.</li>
<li>Updated psutil dependency to 5.9.4.</li>
</ul>
<h2>Version 22.03</h2>
<ul>
<li>NVDA 2021.3 or later is required.</li>
<li>Improved security by not loading the add-on when NVDA is running in secure
mode.</li>
<li>Updated psutil dependency to 5.9.0.</li>
<li>Changed sound splitter toggle command (Alt+NVDA+S) to toggle between NVDA
on the right channel, on the left channel, or sound splitter disabled.</li>
</ul>
<h2>Version 22.02.1</h2>
<ul>
<li>Fixed NVDA and app audio not being restored to both audio channels after
the add-on is disabled or uninstalled.</li>
</ul>
<h2>Version 22.02</h2>
<ul>
<li>Initial version based on Tony Malykh's Tony's Enhancements add-on.</li>
</ul>
Quick Notetakerhttp://addons.nvda-project.org/addons/quickNotetaker.zh_CN.html2024-02-13T14:36:16Z2021-10-08T10:23:30Z
<ul>
<li>Authors: Eilana Benish, Mohammad Suliman</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=quickNotetaker">stable version</a></li>
<li>NVDA compatibility: 2019.3 to 2022.1</li>
</ul>
<p>The Quick Notetaker add-on is a wonderful tool which allows writing notes
quickly and easily anytime and from any app the user is using. Whether the
user is watching a video for example, or participating in a meeting on Zoom,
teams or Google meet, they can easily and smoothly open the notetaker and
take a note. In order to create a quick note, NVDA + Alt + n key combination
can be used, a floating window appears at the top left corner of the screen,
so the note can be typed there.</p>
<p>Every note that is being Created can optionally get the active window title,
and as such, the note content can get the context in which this note was
created by having the note title as the active window title the user was
using. This behavior can be changed from the add-on settings, where the user
can decide whether the active window title is captured when creating a new
note.</p>
<h2>The Notetaker dialog</h2>
<ul>
<li><p>The note edit area: When opening the Notetaker interface the focus will
be in this edit area. Writing with Markdown (a markup language to easily
produce HTML content) is supported also. For more info on Markdown visit
<a href="https://www.markdownguide.org/">the Markdown guide page</a>.</p></li>
<li><p>Preview note: to view the note in an HTML window.</p></li>
<li><p>Copy: to copy the note as is to the clipboard.</p></li>
<li><p>Copy HTML code: to copy the HTML code representing the note. A useful
feature for those who write in Markdown.</p></li>
<li><p>A checkbox to allow saving the note as Microsoft Word also, or updating
the corresponding one if it exists.</p></li>
<li><p>A save and close button.</p></li>
<li><p>A discard button to discard changes when desired. When unsaved changes
exist, a warning message is displayed to the user asking if they are
sure they want to exit and discard their changes.</p></li>
</ul>
<h2>The Notes Manager interface</h2>
<h3>Opening and closing this interface</h3>
<ul>
<li><p>NVDA + Alt + v will launch the Notes Manager interface.</p></li>
<li><p>Using either the Escape key or the close button found at the bottom of
this window will close this interface.</p></li>
</ul>
<h3>The notes list</h3>
<p>The notes are organized in a tabular list which includes:</p>
<ol>
<li><p>The note title: If the note hasn’t got the active window title, the
first line of the note will be the note title displayed in this list.</p></li>
<li><p>Last edited time stamp.</p></li>
<li><p>A preview text of the note content.</p></li>
</ol>
<h3>The options available in Notes Manager interface</h3>
<ul>
<li><p>View note: to view the note in an HTML window.</p></li>
<li><p>Edit note: opens the note to be edited using Notetaker interface.</p></li>
<li><p>Copy note: copies the note content as is to the clipboard.</p></li>
<li><p>Create a Microsoft Word document: Creates a Microsoft Word document
representing this note in case it has no such document.</p></li>
<li><p>Open in Microsoft Word: opens the Microsoft Word document attached to
this note in case it has a one.</p></li>
<li><p>Copy HTML code: copies the HTML code representing this note. A useful
feature for those who write in Markdown.</p></li>
<li><p>Delete note: displays a warning before performing the note deletion.</p></li>
<li><p>New note: the Notetaker interface can be reached from this interface to
create a new note.</p></li>
<li><p>Open settings: opening the add-on settings is also possible from here.</p></li>
<li><p>Close: to close the window.</p></li>
</ul>
<h2>The add-on settings</h2>
<p>The add-on settings are a part of NVDA’s settings interface. To reach those
settings, the user needs to open the NVDA menu using NVDA key + n, choose
preferences > settings, and then arrow down until reaching Quick
Notetaker category.</p>
<p>Using the settings interface the user can:</p>
<ul>
<li><p>Default documents directory: to choose the default directory where Quick
Notetaker documents will be saved. The user can press the “Browse”
button to change the path of this directory.</p></li>
<li><p>Ask me each time where to save the note's corresponding Microsoft Word
document: a checkbox (not checked by default) – to show the dialog for
choosing the location where the document will be saved on each save or
update operation for the note’s Microsoft Word document if such a one
exists.</p></li>
<li><p>Open the note's corresponding Microsoft Word document after saving or
updating: a checkbox (not checked by default) – to allow the user to
choose whether the Microsoft Word document will be opened after a save
or update operation in case the note has such document.</p></li>
<li><p>Capture the active window title when creating a new note: a checkbox
(checked by default) – to allow the note to get the active window title
the user was using when they created the note. This title will be also
the title of the Microsoft Word document for the note in case it has a
one.</p></li>
<li><p>Remember the note taker window size and position: a checkbox (not
checked by default) – to tell the add-on to remember the size and the
position of the Notetaker dialog when creating or editing a note. As
such, when the user opens the dialog next time, the position and the
size will be the same as the last time the dialog was used. The default
position of this dialog is at the top left corner of the screen.</p></li>
<li><p>Auto align text when editing notes (relevant for RTL languages): a
checkbox (checked by default) – to control whether the text when
creating or editing a note should be auto aligned according to the
language used. This is mostly relevant for right to left languages. For
example, if the language used is Arabic or Hebrew, then the text will be
right aligned when this option is chosen, if the language is English or
French, then the text will be left aligned.</p></li>
</ul>
<h2>Keyboard shortcuts</h2>
<ul>
<li><p>NVDA + Alt + n: to open the Notetaker interface.</p></li>
<li><p>NVDA + Alt + v: to open the Notes Manager interface.</p></li>
</ul>
<h3>Keyboard shortcuts in the different interfaces</h3>
<table>
<colgroup>
<col />
<col />
<col />
</colgroup>
<thead>
<tr class="header">
<th>Interface</th>
<th>Command</th>
<th>Keyboard shortcut</th>
</tr>
</thead>
<tbody>
<tr class="odd">
<td>Notetaker</td>
<td>Focus the note edit area</td>
<td>Alt + n</td>
</tr>
<tr class="even">
<td>Notetaker</td>
<td>Align text to the right</td>
<td>Control + r</td>
</tr>
<tr class="odd">
<td>Notetaker</td>
<td>Align text to the left</td>
<td>Control + l</td>
</tr>
<tr class="even">
<td>Notetaker</td>
<td>Preview note in an HTML window</td>
<td>Alt + r</td>
</tr>
<tr class="odd">
<td>Notetaker</td>
<td>Copy</td>
<td>Alt + p</td>
</tr>
<tr class="even">
<td>Notetaker</td>
<td>Copy HTML code</td>
<td>Alt + h</td>
</tr>
<tr class="odd">
<td>Notetaker</td>
<td>Save note as a Microsoft Word document</td>
<td>Alt + w</td>
</tr>
<tr class="even">
<td>Notetaker</td>
<td>Update the note corresponding Microsoft Word document</td>
<td>Alt + w</td>
</tr>
<tr class="odd">
<td>Notetaker</td>
<td>Save and close</td>
<td>Alt + s</td>
</tr>
<tr class="even">
<td>Notetaker</td>
<td>Discard</td>
<td>Alt + d</td>
</tr>
<tr class="odd">
<td>Notetaker</td>
<td>Open notes Manager</td>
<td>Alt + m</td>
</tr>
<tr class="even">
<td>Notes Manager</td>
<td>View note</td>
<td>Alt + v</td>
</tr>
<tr class="odd">
<td>Notes Manager</td>
<td>Edit note</td>
<td>Alt + e</td>
</tr>
<tr class="even">
<td>Notes Manager</td>
<td>Copy note</td>
<td>Alt + p</td>
</tr>
<tr class="odd">
<td>Notes Manager</td>
<td>Open in Microsoft Word (if such a document exists)</td>
<td>Alt + o</td>
</tr>
<tr class="even">
<td>Notes Manager</td>
<td>Create a word document for a saved note</td>
<td>Alt + w</td>
</tr>
<tr class="odd">
<td>Notes Manager</td>
<td>Copy HTML code</td>
<td>Alt + h</td>
</tr>
<tr class="even">
<td>Notes Manager</td>
<td>Delete note</td>
<td>Alt + d</td>
</tr>
<tr class="odd">
<td>Notes Manager</td>
<td>New note</td>
<td>Alt + n</td>
</tr>
<tr class="even">
<td>Notes Manager</td>
<td>Open settings</td>
<td>Alt + s</td>
</tr>
<tr class="odd">
<td>Notes Manager</td>
<td>Close the interface</td>
<td>Alt + c</td>
</tr>
<tr class="even">
<td>The settings interface</td>
<td>Ask me each time where to save the note's corresponding Microsoft Word document</td>
<td>Alt + w</td>
</tr>
<tr class="odd">
<td>The settings interface</td>
<td>Open the note's corresponding Microsoft Word document after saving or updating</td>
<td>Alt + o</td>
</tr>
<tr class="even">
<td>The settings interface</td>
<td>Capture the active window title when creating a new note</td>
<td>Alt + c</td>
</tr>
<tr class="odd">
<td>The settings interface</td>
<td>Remember the note taker window size and position</td>
<td>Alt + r</td>
</tr>
<tr class="even">
<td>The settings interface</td>
<td>Auto align text when editing notes (relevant for RTL languages)</td>
<td>Alt + t</td>
</tr>
</tbody>
</table>
<h2>Acknowledgements</h2>
<ul>
<li><p>The add-on comes bundled with Pandoc, a wonderful tool which allows
converting documents between different formats. Without this tool the
add-on won’t be able to offer the capabilities it offers. For more info
on Pandoc <a href="https://pandoc.org/">visit the Pandoc homepage</a>.</p></li>
<li><p>The add-on also relies on a Python Markdown package called
markdown2. For more info on this package <a href="https://github.com/trentm/python-markdown2">visit the package GitHub
page</a>.</p></li>
<li><p>A great thanks to NV Access, add-on authors, and contributors! Several
parts of the add-on were inspired by your magnificent work and effort,
so please keep up this brilliant ecosystem and the cooperation.</p></li>
</ul>
<h2>Changes for 1.1</h2>
<ul>
<li>This release adds compatibility for NVDA 2022.1 and above;</li>
<li>Fixed a bug with displaying the note title in Notes manager;</li>
<li>Added German and Chinese translation;</li>
<li>To elaborate on the bug with displaying the note title, the previous
version included a bug where the whole text of the note was displayed to
be the title of the note, which wasn't the intention of the
developers. The bug is now fixed;</li>
<li>the newly created notes will have their title as the first line of the
note;</li>
<li>For existing notes, the user can select the note from the notes list in
Notes Manager, click "Edit note", and then click "Save and close";</li>
<li>We made it possible to be able to edit the note even without needing to
change the content to allow the user to overcome this bug.</li>
</ul>
<h2>Changes for 1.0</h2>
<p>Initial version.</p>
忽略空白处的缩进提示http://addons.nvda-project.org/addons/ignoreBlanksIndentationReporting.zh_CN.html2024-02-13T14:35:06Z2021-08-10T16:58:00Z
<ul>
<li>作者: Samuel Kacer</li>
<li>NVDA 兼容版本:2021.1或更高</li>
<li>下载 <a>稳定版</a></li>
</ul>
<p>这是一个 NVDA 插件,它改变了缩进的提示方式,在决定是否读出缩进的变化时不考虑空行。通过一个例子与正常行为进行对比,可以更好地理解。</p>
<p>考虑一下这个例子:</p>
<pre><code>def foo():
x = 42
return x
def bar():
</code></pre>
<p>NVDA 目前的行为是读出任何缩进发生变化的行的缩进变化,即使该行是空白。因此,这个例子会被读成这样:</p>
<pre><code>def foo():
tab x = 42
no indent blank
tab return x
no indent blank
def bar():
</code></pre>
<p>这种行为的缺点是,对于大多数编程语言,如
python,空行没有任何语义上的意义,只是用来在视觉上分隔代码行,对代码的意义没有任何改变。因此,在进入空行时读出缩进的变化,在进入下一行后再读出缩进的变化,只是一种噪音,使人更难专注于理解代码。</p>
<p>这个插件的目的是通过在计算缩进语音时忽略空行来改进行为,因此这个例子改成了这样读:</p>
<pre><code>def foo():
tab x = 42
blank
return x
no indent def bar():
</code></pre>
<h2>更新日志</h2>
<h3>v0.4</h3>
<ul>
<li>support NVDA version 2022.3+, including 2023.1</li>
</ul>
<h3>version 0.3</h3>
<ul>
<li>support NVDA version 2021.3+</li>
<li>tested compatibility with NVDA 2022.1</li>
</ul>
<h3>version 0.2</h3>
<ul>
<li>fix crash while reading math content</li>
</ul>
<h3>版本 0.1</h3>
<ul>
<li>首次发布</li>
</ul>
<h2>源代码</h2>
<p><a href="https://github.com/SamKacer/IgnoreBlanksIndentation">Source code repository</a></p>
<p>https://www.nvaccess.org/addonStore/legacy?file=ignoreBlanksIndentationReporting</p>
快捷搜索http://addons.nvda-project.org/addons/searchWith.zh_CN.html2024-02-13T14:36:01Z2021-08-05T17:27:48Z
<ul>
<li>作者: Ibrahim Hamadeh</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=searchwith">稳定版</a></li>
<li>NVDA 兼容性: 2019.3 以上</li>
</ul>
<p>该插件可帮助您使用各种搜索引擎搜索文本。如果您在没有选择文本的情况下按下插件的搜索快捷键,会显示一个对话框,其中包含一个用于输入搜索关键词的编辑框,直接按回车键使用
Google 搜索,或按 Tab 键选择其他引擎进行搜索。</p>
<p>或者您可以选中想搜索的文本,按一次搜索快捷键,此时会显示一个菜单,其中包含各种搜索引擎可供选择。您也可以在选中想搜索的文本后,连按两次搜索快捷键直接使用
Google 进行搜索。</p>
<p>The Default gesture for the addon is: NVDA+ Windows+ S. If the keystroke do not work for you, or conflict with other keystroke, you can as always add a gesture or change the existent one going to: NVDA menu>preferences>inputGestures>Search With category.</p>
<h2>使用</h2>
<ul>
<li>如果您想输入关键词搜索,只需按下相应的手势,随后会显示一个对话框,其中包含一个用于输入搜索关键词的编辑框。</li>
<li>若想使用谷歌搜索,只需在输入关键词后按下回车键。</li>
<li>如果您想选择其他搜索引擎,只需按一下 Tab 键,找到“其他”按钮并按空格键,随后将出现一个弹出菜单,其中包含了可供选择的各种搜索引擎。可选则使用
Yahoo, Bing, DuckDuckGo, 和 Youtube搜索,当然,这些是默认的,您可以在设置面板中对默认菜单进行修改。</li>
<li>另一种使用方法是先选中要搜索的文本。然后按下插件的默认手势或者您自定义的手势,然后会显示一个包含各种搜索引擎的虚拟菜单,可以是默认菜单,也可以是您根据自己需求自定义的菜单。</li>
<li>或者,如果您想直接使用 Google 搜索直接连按两次搜索快捷键就搞定了。</li>
<li>想要专门针对剪贴板文本和“最后依次朗读的文本”弹出搜索引擎菜单吗?没问题,可以在“按键与手势”对话框内分配相应的快捷键:
<ul>
<li>针对剪贴板中的文本弹出搜索引擎菜单,连按两次使用 Google 搜索。</li>
<li>针对最后依次朗读的文本弹出搜索引擎菜单,连按两次使用 Google 搜索。</li>
</ul>
</li>
<li>想修改默认的搜索引擎菜单?没问题,您可以从设置面板按照自己的喜好对默认的搜索菜单进行修改。</li>
<li>只要您愿意,您可以将其他的搜索引擎添加到搜索菜单,还可以对菜单项进行删除、上移、下移、或者恢复默认。</li>
<li>如果您希望这些设置永久生效,还必须在修改之后保存一下配置。</li>
<li>想使用其他语言在 Google 上搜索吗?</li>
<li><p>可以转到插件的设置面板,您可以选择使用 Google 搜索的语言:</p>
<ol>
<li>使用浏览器语言。</li>
<li>使用NVDA语言。</li>
<li>使用 Windows 语言。</li>
</ol>
</li>
<li><p>此外,在设置面板的默认搜索关键词组合框中,您可以选择默认搜索关键词的来源</p>
<ul>
<li>留空</li>
<li>使用剪贴板中的文本</li>
<li>使用最后依次朗读的文本</li>
</ul>
</li>
<li><p>如果选择使用剪贴板或上次朗读的文本,搜索框中的文本将被选中,便于一键清除。</p></li>
<li>现在,让我们来设置翻译引擎 Google Translate 和 DeepL 的目标语言。</li>
<li>依然在设置面板中,在翻译引擎分组下,有两个组合框,一个用于 Google 翻译,另一个用于 DeepL
翻译。选择您需要翻译到的目标语言,然后就完成了。</li>
<li>最后,特别是对于高级用户</li>
<li>在设置面板中勾选“保存用户数据”,更新新版新增的搜索引擎条目的同时也会保留用户自定义的搜索引擎条目。</li>
</ul>
<p>就这样吧,希望你搜索快乐,快乐搜索!</p>
<h3>2.5.3 的变化</h3>
<ul>
<li>将 DeepL 翻译添加到可用引擎中。</li>
<li>在设置面板中添加两个组合框,用来选择 Google 翻译和 DeepL 翻译的目标语言。</li>
</ul>
<h3>2.3 的变化</h3>
<ul>
<li>在设置面板中勾选“保存用户数据”,更新新版新增的搜索引擎条目的同时也会保留用户自定义的搜索引擎条目。</li>
<li>更新“最近测试的 NVDA 版本”使之兼容2023.1</li>
</ul>
<h3>2.0 的变化</h3>
<ul>
<li>在安全模式下插件将被禁用。</li>
<li>将最近测试的 NVDA 版本更新为 2022.1,以符合最新的 API 更改要求。</li>
</ul>
<h3>1.8 的变化</h3>
<ul>
<li>在设置面板中增加了一个复选框,高级用户可以选择保留数据目录。</li>
<li>在按键与手势中添加了两个新条目:
<ul>
<li>针对剪贴板中的文本弹出搜索引擎菜单,连按两次使用 Google 搜索。</li>
<li>针对最后依次朗读的文本弹出搜索引擎菜单,连按两次使用 Google 搜索。</li>
</ul>
</li>
</ul>
<h3>1.7 的变化</h3>
<ul>
<li>在插件的设置面板,增加了一个组合框,可以选择搜索框中的默认文本来源。</li>
<li>您可以选择留空、使用剪贴板中的文本或使用最后依次朗读的文本。</li>
</ul>
<h3>1.2 的变化</h3>
<ul>
<li>增加更多可以添加到搜索菜单的网站,例如 Stackoverflow、Stackexchange、GoogleBooks 等。</li>
<li>在插件的设置面板,增加了一个选项使用最后依次朗读的文本作为默认搜索关键词。</li>
</ul>
<h3>0.4 的变化</h3>
<ul>
<li>如果不选择文本,添加一个对话框,可以输入搜索关键词进行搜索。</li>
<li>可以通过设置面板修改搜索菜单,以满足不同的用户需求。</li>
</ul>
<h3>0.3 的变化</h3>
<ul>
<li>添加设置面板,在谷歌搜索中提供更多语言选项。</li>
</ul>
<h3>0.1 的变化</h3>
<ul>
<li>初始版本</li>
</ul>
程序名称和版本朗读插件http://addons.nvda-project.org/addons/sayProductNameAndVersion.zh_CN.html2024-03-20T01:25:51Z2021-08-05T12:29:53Z
<ul>
<li>Author: Luke Davis <a href="mailto:XLTechie@newanswertech.com">XLTechie@newanswertech.com</a>, Patrick ZAJDA
<a href="mailto:patrick@zajda.fr">patrick@zajda.fr</a></li>
<li>NVDA compatibility: 2017.3 through 2024.X</li>
<li>下载 <a>稳定版</a></li>
</ul>
<p>This <a href="https://nvaccess.org/">NVDA</a> add-on adds a shortcut to announce
product name and version of the foreground application, or copies this
information to the clipboard.</p>
<ul>
<li>Shortcut: <code>NVDA+shift+v</code></li>
<li>连按两次可将产品名称和版本复制到剪贴板。</li>
<li>Press it three times to copy only the version to the clipboard.</li>
</ul>
<p>This shortcut may be remapped in the Tools category of NVDA's Input
Gestures.</p>
<p>If you like this add-on and are willing to help others decide whether it is
useful, please leave a <a href="https://github.com/nvaccess/addon-datastore/discussions/2683">review</a>.</p>
<p>For change history, please read the <a>changelog</a>.</p>
<h3>Tips</h3>
<ul>
<li>To find out the Windows version with this add-on, you can focus on any
Windows component (such as desktop, the start menu, the run dialog, etc.),
and press the shortcut key. Note, that this does not give you the release
version name, such as "23H3". Instead it gives you something closer to the
build version, as you would get from the second line of the "<code>winver</code>"
command.</li>
<li>To get the NVDA version, open any NVDA dialog or menu, and press this
add-on's shortcut key. For example, press <code>NVDA+n</code> to open the NVDA menu,
then press <code>NVDA+shift+v</code>, then press <code>escape</code> to leave the menu.</li>
</ul>
<p>https://www.nvaccess.org/addonStore/legacy?file=sayProductNameAndVersion</p>
<p>https://github.com/opensourcesys/sayProductNameAndVersion/blob/master/changelog.md#readme</p>
事件跟踪器http://addons.nvda-project.org/addons/evtTracker.zh_CN.html2024-03-22T17:52:59Z2021-07-21T09:20:37Z
<h1>Event Tracker</h1>
<ul>
<li>Author: Joseph Lee, Thiago Seus</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=evtTracker">稳定版</a></li>
<li>NVDA 兼容性:2022.4 及更高版本</li>
</ul>
<p>此插件输出有关为其触发事件的对象的信息。在调试日志模式中记录的属性包括对象类型、名称、角色、事件、应用程序模块和可访问性 API 特定信息,例如
IAccessible 对象的 accName 和 UIA 对象的自动化 Id。</p>
<p>注意:</p>
<ul>
<li>此插件专为需要跟踪来自应用程序和各种控件事件的开发者和高级用户而设计。</li>
<li>为了使用此插件,NVDA 必须在调试模式下进行日志记录(从常规设置/日志记录级别进行配置,或在启用调试日志记录的情况下重新启动)。</li>
<li>在 Event Tracker 之前运行的插件可能无法将事件传递给其他插件,包括 Event
Tracker。如果发生这种情况,事件跟踪器将无法记录事件。</li>
<li>事件按顺序从全局插件、应用程序模块、树拦截器和 NVDA 对象处理。</li>
</ul>
<h2>事件及其信息</h2>
<p>跟踪和记录以下事件:</p>
<ul>
<li>焦点操作:获得焦点、失去焦点、进入焦点、前景</li>
<li>更改:名称、值、状态、描述、实时区域</li>
<li>其他事件: alert</li>
<li>UIA 事件:控制器、拖放、元素选择、项目状态、布局无效、通知、系统警报、文本更改、工具提示打开、窗口打开</li>
</ul>
<p>对于每个事件,将记录以下信息:</p>
<ul>
<li>事件名称</li>
<li>对象</li>
<li>对象名称</li>
<li>对象角色</li>
<li>取决于事件的对象值或状态</li>
<li>应用模块</li>
<li>对于 IAccessible 对象:acc 名称、子 ID</li>
<li>对于 UIA 对象:Automation
Id、类名、通知属性(如果记录通知事件信息)、布局无效事件的子对象数量、项目状态的属性、拖拽和放置(如果已定义)</li>
</ul>
<p>您还可以指定一个手势以在列表中查看事件(NVDA 菜单选项/按键与手势,事件跟踪器类别)。该列表最多保存 100 个已处理的最新事件。</p>
<p>If you find this add-on useful, please <a href="https://github.com/nvaccess/addon-datastore/discussions/2717">review it</a> in the NVDA Add-on
Store.</p>
<h2>Version 24.1.0</h2>
<ul>
<li>NVDA 2024.1 compatibility.</li>
</ul>
<h2>版本 23.02</h2>
<ul>
<li>需要 NVDA 2022.4 或更高版本。</li>
<li>需要 Windows 10 21H2(2021 年 11 月更新/内部版本 19044)或更高版本。</li>
<li>将跟踪 Alert 事件(主要针对 IAccessible 对象)。</li>
</ul>
<h2>版本 23.01</h2>
<ul>
<li>需要 NVDA 2022.3 或更高版本。</li>
<li>需要 Windows 10 或更高版本,因为自 2023 年 1 月起,Microsoft 不再支持 Windows 7、8 和 8.1。</li>
</ul>
<h2>版本 22.12</h2>
<ul>
<li>添加了事件列表对话框(未分配手势)以列出插件记录的最多 100 个最近的事件(By Thiago Seus)。</li>
<li>UIA 通知属性等其他事件信息与事件同时被记录。</li>
</ul>
<h2>版本 22.10</h2>
<ul>
<li>出于安全考虑,需要 NVDA 2022.2 或更高版本。</li>
<li>跟踪以下 UIA 属性更改:拖拽、放置。</li>
<li>UIA 项目状态属性文本已记录。</li>
<li>如果对象没有定义窗口类名,NVDA 将不再播放错误提示音或无任何动作。</li>
</ul>
<h2>版本 22.06</h2>
<ul>
<li>出于安全考虑,需要 NVDA 2021.3 或更高版本。</li>
</ul>
<h2>版本 21.10</h2>
<ul>
<li>由于对 NVDA 的更改会影响此插件,因此需要 NVDA 2021.2 或更高版本。</li>
<li>UIA 布局无效事件将被跟踪。</li>
<li>对象角色和状态信息将类似于最近 NVDA 版本中的开发者信息。</li>
</ul>
<h2>版本 21.07</h2>
<ul>
<li>初始发行。</li>
</ul>
PC 盲文键盘输入http://addons.nvda-project.org/addons/pcKbBrl.zh_CN.html2024-02-13T14:35:52Z2021-07-08T20:09:59Z
<ul>
<li>Author: NV Access Limited, Noelia Ruiz Martínez</li>
<li>Copyright: 2012-2023 NV Access Limited, Noelia Ruiz Martínez</li>
<li>许可证:GNU通用公共许可证版本2.0</li>
<li><a href="https://www.nvaccess.org/addonStore/legacy?file=pckbbrl-o">版本 2014.1</a>(与 NVDA 2017.3至2019.2兼容)</li>
</ul>
<p>此插件允许通过 PC 键盘输入盲文。目前,支持以下键盘布局:</p>
<ul>
<li>英文 QWERTY 键盘。</li>
<li>法语(法国)。</li>
<li>德语(德国)。</li>
<li>意大利语(意大利)。</li>
<li>波斯语。</li>
<li>葡萄牙语(葡萄牙)。</li>
<li>西班牙语(西班牙和墨西哥)。</li>
<li>土耳其语。</li>
</ul>
<h2>如何配置</h2>
<p>可从 NVDA 的设置对话框中的相应类别配置此插件。还可从输入手势对话框的配置类别中分配用于打开插件设置面板的手势。</p>
<p>如要使用单手键入,请选中相应的复选框,或者如您希望使用标准模式(双手)键入,请确保不选中该复选框。</p>
<p>您还可以选择 NVDA 是否应该读出单个类型点(使用 )"单手模式"的功能)。</p>
<p>如果您希望在单手键入时自动发送点,请使用旋转控件将超时设置为大于 0。</p>
<p>此外,您还可以设置在单手输入时发送、清除和组合点的字符,以及在单手或标准模式下要忽略的字符。</p>
<p>还可以在插件设置面板中恢复默认设置。</p>
<h2>如何使用</h2>
<ol>
<li>按 NVDA+0 启用盲文输入。此手势可以从输入手势对话框的盲文类别更改。</li>
<li><p>通过在 PC 键盘上同时按下一组按键来键入盲文,就好像在盲文键盘上键入一样。</p>
<ul>
<li><p>如用双手输入文本,请使用 QWERTY 键盘布局的以下按键,或其他键盘布局相应位置的按键:</p>
<ul>
<li>f、d 和 s分别代表 1、2 和 3 点。</li>
<li>j、k 和 l分别代表 4、5 和 6 点。</li>
<li>使用 a 和分号(;)分别代表 7 和 8 点。</li>
<li>您也可用上一行中的相应按键,即 q、w、e、r、u、i、o 和 p。</li>
</ul>
</li>
<li><p>如用单手键入文本,则可以同时或多次按键来编写字符,并添加与所需字符相对应的点。添加所有点后,请按g或h键以键入该字符。如果在键入字符时出错,可以在键入字符之前,按t或y清除点。
QWERTY 键盘布局中使用的按键如下:</p>
<ul>
<li>左手: f、 d、 s、 r、 e、 w、 a、 q 分别代表 1、 2、 3、 4、 5、 6、 7 、 8 点。</li>
<li>右手: j、 k、 l、 u、 i、 o、 分号(;)、 p 分别代表 1、 2、 3、 4、 5、 6、 7、 8 点。</li>
</ul>
</li>
</ul>
</li>
<li><p>您可以照常使用大多数其他按键,包括空格键、退格键、回车键和功能键。请注意不要按下 alt + shift,因为更改键盘布局可能会影响键入的点。</p></li>
<li>按下空格键加盲文点组合即可移动系统光标(或读出当前行),即使您使用的是点显器。例如,空格 + 1 点模拟上光标,空格 + 4、 5、 6
点模拟Ctrl + end,空格 + 1、 4 点读出当前行,等等。</li>
<li>按 NVDA + 0 禁用盲文输入。</li>
</ol>
<h2>重要提示</h2>
<p>此插件使用 NVDA 的内置盲文输入支持。因此,使用的输入表是 NVDA 的盲文设置对话框中指定的输入表。</p>
<p>某些键盘,尤其是笔记本电脑键盘,无法处理按下的某些按键组合。发生这种情况时,会忽略某些按键。不幸的是,没有什么办法可以解决此问题,因为 Windows
及 NVDA 从未接收到按键指令。在某些情况下,用单手或双手使用上排按键可能会有所帮助,因为键盘可能允许这些按键。</p>
<h2>28.0.0 的更改</h2>
<ul>
<li>更改了单手模式的默认值。</li>
</ul>
<h2>2023年2月23日的更改</h2>
<ul>
<li>新增了配置在单手模式下用于输入点的按键的功能。</li>
<li>现在您可以设置在输入盲文时要忽略的按键。</li>
<li>插件设置面板中添加了恢复默认值按钮。</li>
<li>兼容 NVDA 2023.1。</li>
</ul>
<h2>2022.1 的更改</h2>
<ul>
<li>添加了配置键以在用单手键入时发送和清除点的功能。此外,可以设置超时自动发送点,而无需按确认键。</li>
</ul>
<h2>2021.1 的更改</h2>
<ul>
<li>当单手模式未激活或按下空格时,NVDA 不会尝试说出点。</li>
<li>兼容 NVDA 2021.1。</li>
</ul>
<h2>2020.1 的更改</h2>
<ul>
<li>您可以按空格键加盲文点组合来模拟手势,类似于点显器中可用的命令。</li>
<li>添加了一个选项,用于使用单手模式键入单点。</li>
</ul>
<h2>贡献者</h2>
<ul>
<li>James Teh</li>
<li>Noelia.</li>
<li>Mohammadreza Rashad</li>
<li>Cagri Dogan</li>
<li>Bernd Dorer</li>
<li>Ângelo Abrantes</li>
<li>Cyrille Bougot</li>
<li>Abdel.</li>
</ul>
Windows 放大镜增强插件http://addons.nvda-project.org/addons/winMag.zh_CN.html2024-02-15T21:52:02Z2021-07-08T08:49:47Z
<ul>
<li>作者: Cyrille Bougot</li>
<li>NVDA compatibility: 2019.2.1 and beyond</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=winmag">稳定版</a></li>
</ul>
<p>此插件增强了 NVDA 使用 Windows 放大镜时的体验。</p>
<h2>功能</h2>
<ul>
<li>允许读出某些放大镜原有快捷键的结果。</li>
<li>允许减少表格导航快捷键与放大镜快捷键的冲突。</li>
<li>Adds some keyboard shortcuts to toggle various native options of the
Magnifier.</li>
<li>Allow to save and restore the configuration parameters of the Magnifier.</li>
<li>Adds some extra features that are not provided by Windows Magnifier (mouse
to view, Magnifier window not on top)</li>
</ul>
<h2>设置</h2>
<p>The setting panel of Windows Magnifier add-on allows to configure how NVDA
reacts to native Windows Magnifier commands. You may want to have more or
less commands reported according to what you are able to see. The panel
also contains an option to modify the behaviour of Windows Magnifier control
window.</p>
<p>This panel may be opened choosing Preferences -> Settings in the NVDA menu and then selecting the Windows Magnifier category in the Settings window.
The keyboard shortcut NVDA+Windows+O then O also allows to open this settings panel directly.</p>
<p>该面板包含以下选项:</p>
<ul>
<li><p>读出试图移动:控制使用 Ctrl+Alt+光标命令移动视图时读出的内容。这三个选项是:</p>
<ul>
<li>关闭:不读出任何内容。</li>
<li>语音:用语音在视图移动时提示视图缩放范围的位置。</li>
<li>提示音:在视图移动时播放,且用音高提示视图缩放范围的位置。</li>
</ul>
<p>This option does not affect docked view mode.</p></li>
<li><p>Report screen edges: controls what is reported when you reach the edges of
the screen while moving the view with Control+Alt+Arrows commands. The
three options are: Off, With speech and With tones. This option does not
affect docked view mode.</p></li>
<li>Volume of the tones reporting the position of the view: allows to define
the volume of the tones if you have selected to report view moves or
screen edges with tones.</li>
<li>读出打开或关闭:如果选中,当您使用 Windows++ 或 Windows+ESC 命令打开或关闭放大镜时,将读出放大镜的状态。</li>
<li>读出缩放:如果选中,当您使用 Windows++ 或 Windows+- 缩放命令时会读出放大镜的缩放级别。</li>
<li>读出反色:如果选中,则在使用 Ctrl+Alt+I 切换命令时读出反色状态。</li>
<li>读出视图更改:如果选中,则在使用更改视图类型的命令(Ctrl+Alt+M、Ctrl+Alt+F、Ctrl+Alt+D、Ctrl+Alt+L)时读出视图类型</li>
<li>读出镜头或停靠窗口调整大小:如果选中,则在您使用调整大小命令(Alt+Shift+光标)时会读出一条消息。在停靠窗口模式下,读出高度或宽度。在镜头模式下,目前无法读出新维度。这些调整大小命令并非在所有版本的
Windows 上都可用;如果您的 Windows 版本不支持,您不应选中此选项。</li>
<li><p>在文档和列表视图中,将Ctrl+alt+光标快捷键传递给 Windows 放大镜: 有三种选择:</p>
<ul>
<li>Never: The command is not passed to Windows Magnifier and standard
NVDA table navigation can operate. When used in documents out of a
table, the Control+Alt+Arrow command reports a "Not in a table" error
message. This is the standard behaviour of NVDA without this add-on.
You can still use NVDA+Windows+O then arrows to move the magnified
view.</li>
<li>Only when not in table: In table or in list views, Control+Alt+Arrow
commands perform standard table navigation. When used in documents
out of a table, Control+Alt+Arrow commands perform standard Magnifier
view move commands. If you still want to move Windows Magnifier view
while in table or in list view, you will need to press NVDA+F2 before
using Control+Alt+Arrow commands or alternately use NVDA+Windows+O
then arrows. This option is the best compromise if you want to use
Control+Alt+Arrow for both Magnifier and table navigation.</li>
<li>始终:Ctrl+Alt+光标命令在任何情况下都会移动放大镜的视图。如果您不使用
Ctrl+Alt+光标在表格中导航,则此选项可能很有用,例如您在 NVDA 中更改了表格导航快捷键,或者您专门使用 <a href="https://addons.nvda-project.org/addons/easyTableNavigator.zh_CN.html">简单表格导航</a>
插件进行表格导航。</li>
</ul>
</li>
<li><p>Keep Windows Magnifier command window always on top: If unchecked, the
Magnifier's control window will not be kept always on top of other
windows.</p></li>
</ul>
<h2>此插件添加的命令</h2>
<p>In addition to native Magnifier commands, this add-on provide additional
commands:</p>
<ul>
<li>Commands that allow to control Magnifier's options without opening its
configuration page.</li>
<li>Extra commands specific to this add-on.</li>
</ul>
<p>All these additional commands are accessible through the Magnifier layer
command NVDA+Windows+O:</p>
<ul>
<li>NVDA+Windows+O,C:打开或关闭跟随文本光标。</li>
<li>NVDA+Windows+O,F:打开或关闭跟随键盘焦点。</li>
<li>NVDA+Windows+O,M:打开或关闭跟随鼠标指针。</li>
<li>NVDA+Windows+O then T: Toggles on or off tracking globally. When tracking
is toggled on again, it is set to the last active tracking configuration
before tracking was toggled off.</li>
<li>NVDA+Windows+O,S:打开或关闭图像和文本的平滑边缘。</li>
<li>NVDA+Windows+O then R: Switches between mouse pointer tracking modes
(within the edge of the screen or centered on the screen); this feature is
only available on Windows 10 build 17643 or higher.</li>
<li>NVDA+Windows+O,X:在保留文本光标模式之间切换,包括屏幕边缘内和在屏幕上居中(此功能仅适用于 Windows 10 build
18894 及以上版本)。</li>
<li>NVDA+Windows+O then shift+P: Saves the current configuration parameters of
the magnifier to NVDA's configuration.</li>
<li>NVDA+Windows+O then P: Restores the current configuration parameters of
the magnifier from NVDA's configuration. If no configuration parameters
has been previously saved to NVDA's configuration, the default
configuration parameters of Windows Magnifier are restored instead.</li>
<li>NVDA+Windows+O then Arrows: Move the magnified view.</li>
<li>NVDA+Windows+O then V: Moves the mouse cursor in the center of the
magnified view (command not available in docked view mode).</li>
<li>NVDA+Windows+O then W: Switches on or off the mode allowing to keep
Windows Magnifier's control window always on top of the other ones. This
feature is only available for installed versions of NVDA.</li>
<li>NVDA+Windows+O,O:打开Windows 放大镜插件设置。</li>
<li>NVDA+Windows+O,H:显示放大镜命令的帮助。</li>
</ul>
<p>每个命令没有默认手势和快捷键,但如果需要,可以在“按键与首饰”对话框中正常设置一个。同样,您也可以修改或删除放大镜层访问快捷键(NVDA+Windows+O)。但是,不能修改放大镜图层子命令的快捷键。</p>
<h2>放大镜的原有快捷键</h2>
<p>根据您的设置,此插件会朗读以下放大镜原有快捷键按下时的状态信息:</p>
<ul>
<li>Windows 徽标键 + 加号 (+):打开放大镜</li>
<li>Windows 徽标键 + Esc:关闭放大镜</li>
<li>Windows 徽标键 + 加号 (+):当放大镜打开时,进行放大</li>
<li>Windows 徽标键 + 减号 (-):当放大镜打开时,进行缩小</li>
<li>Ctrl + Alt + I:打开或关闭反色</li>
<li>Ctrl + Alt + D:切换到停靠视图</li>
<li>Ctrl + Alt + F:切换到全屏视图</li>
<li>Ctrl + Alt + L:切换到镜头视图</li>
<li>Ctrl + Alt + M:循环浏览视图</li>
<li>Resize the lens with the keyboard: Shift+Alt+Left/Right/Up/DownArrow Note:
although this does not seem to be documented, this shortcut seems to have
been withdrawn in recent Windows versions such as Windows 10 2004.</li>
<li>Move the magnified view: Control+Alt+Arrows</li>
</ul>
<p>下面是其他放大镜原有快捷键的列表,仅供参考:</p>
<ul>
<li>Ctrl + Alt + 鼠标滚轮:使用鼠标滚轮放大和缩小。</li>
<li>Windows 徽标键 + Ctrl + M:打开“放大镜”设置。</li>
<li>Ctrl + Alt + R:使用鼠标调整镜头大小。</li>
<li>Ctrl + Alt + 空格键:使用全屏视图时快速查看整个桌面。</li>
</ul>
<p>您不能修改放大镜的原有快捷键。</p>
<h2>注意</h2>
<ul>
<li>对于配备 Intel 显卡的计算机,Ctrl+Alt+光标键也是修改屏幕方向的快捷键。这些快捷键在默认情况下是启用的,并且与移动放大镜视图的
Windows 快捷键冲突。您需要禁用它们才能将其用于放大镜。它们可以在 Intel 图形控制面板或系统托盘中的 Intel菜单中禁用。</li>
<li><p>在某些 Windows 版本,Alt+Shift+光标键是 Windows
放大镜的快捷键,用于调整放大视图的大小(镜头或停靠)。当放大镜处于活动状态时,即使在全屏试图下,这些快捷键也将被放大镜捕获,并且不能传递给应用程序,即使您之前按了
NVDA+F2。要在当前应用程序中使用这些快捷键,您需要退出放大镜(Windows+Esc),然后再重新打开它(Windows++)。例如在
Word 中降低标题级别:</p>
<ul>
<li>按 Windows 徽标键 +Esc退出放大镜。</li>
<li>按Alt+Shift+右光标键可降低当前标题级别。</li>
<li>按 Windows 徽标键 + 加号 (+)重新打开放大镜。</li>
</ul>
</li>
<li><p>有关Windows放大镜功能和快捷方式的详细信息,请参阅以下页面:</p>
<ul>
<li><a href="https://support.microsoft.com/zh-cn/help/11542/windows-use-magnifier-to-make-things-easier-to-see">使用“放大镜”可使屏幕上的内容更易于查看</a></li>
<li><a href="https://support.microsoft.com/zh-cn/help/13810">用于辅助功能的 Windows 键盘快捷方式</a></li>
</ul>
</li>
<li><p>This add-on has not been tested in multi-screen environment and there are
chances that some feature are not working in this environment. If you are
using multi-screen environment and want it to be supported, please contact
me to have it implemented.</p></li>
<li>More generally, do not hesitate to contact me on the <a href="https://github.com/CyrilleB79/winMag">GitHub page</a> of
this add-on or directly by e-mail.</li>
</ul>
<h2>更新日志</h2>
<h3>Version 3.5</h3>
<ul>
<li>Prepares compatibility with NVDA 2024.1.</li>
<li>Addresses potential security issues related to <a>GHSA-xg6w-23rw-39r8</a>
when using the add-on with older versions of NVDA. However, it is
recommended to use NVDA 2023.3.3 or higher.</li>
<li>Note: From now on, translation updates will not appear anymore in the
change log.</li>
</ul>
<h3>Version 3.4</h3>
<ul>
<li>The "move mouse to view" command works again</li>
<li>Updated localizations.</li>
</ul>
<h3>Version 3.3</h3>
<ul>
<li>Compatibility reduced to NVDA 2019.2.1 and beyond. The last compatible
versions with NVDA 2018.3 are the <a>3.2</a> (partially compatible) and
<a>1.1</a> (fully compatible)</li>
<li>Fixed a bug in the settings panel with NVDA 2019.2.1.</li>
</ul>
<h3>Version 3.2</h3>
<ul>
<li>Removed the dev channel.</li>
<li>Updated localizations.</li>
</ul>
<h3>Version 3.1</h3>
<ul>
<li>Fixed an issue preventing the Magnifier's command window from being
restored on top.</li>
<li>Fixed an issue preventing the add-on to run on NVDA 2019.2.1.</li>
<li>Updated localizations.</li>
</ul>
<h3>Version 3.0</h3>
<ul>
<li>Pressing the zoom buttons in the Magnifier window (with the keyboard) now
reports the new zoom level.</li>
<li>The parameter controlling if Magnifier control window remains always on
top is now stored in configuration; this means that this parameter is
remembered when restarting NVDA and can be enabled or not depending on the
active profile.</li>
<li>Fixed a bug causing unexpected screen curtain de-activation when using
move to view or move view commands.</li>
<li>Option alwaysOnTop setting will now be honoured also when changing
magnification mode.</li>
<li>Added ability to save and restore Windows Magnifier's config in NVDA's
config.</li>
<li>Compatibility with NVDA 2023.1.</li>
<li>Clarify which type of tracking is re-enabled when tracking is toggled on
again.</li>
<li>Updated localizations.</li>
</ul>
<h3>Version 2.0</h3>
<ul>
<li>The view can be moved with arrows while in Windows Magnifier layer.</li>
<li>Capability to keep the Magnifier commands Window always on top or not.</li>
<li>Added "Report screen edges" feature.</li>
<li>Volume setting of tones when using move view commands.</li>
<li>Reporting view moves and mouse to view commands are now supported in Lens
mode.</li>
<li>Compatibility with NVDA 2022.1.</li>
<li>Fixed a bug that sometimes incorrectly reported that the Magnifier was not
working upon script call.</li>
<li>The release is now performed thanks to a GitHub action instead of
appVeyor.</li>
<li>Updated localizations.</li>
</ul>
<h3>Version 1.1</h3>
<ul>
<li>Added localizations.</li>
</ul>
<h3>版本 1.0</h3>
<ul>
<li>发布初始版本。</li>
</ul>
<p>https://github.com/CyrilleB79/winMag/releases/download/V1.1/winMag-1.1.nvda-addon</p>
<p>https://github.com/CyrilleB79/winMag/releases/download/V3.2/winMag-3.2.nvda-addon</p>
<p>https://github.com/nvaccess/nvda/security/advisories/GHSA-xg6w-23rw-39r8#event-132994</p>
Direct Linkhttp://addons.nvda-project.org/addons/directLink.zh_CN.html2023-05-10T20:38:33Z2021-06-29T07:11:59Z
<ul>
<li>作者: Fawaz Abdul Rahman</li>
<li>版本: 1.0</li>
<li>NVDA 兼容版本: 2019.3及更高</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=directlink">稳定版</a></li>
</ul>
<h2>功能</h2>
<p>此插件的目的是将 Dropbox、Google Drive 或 oneDrive(个人版和商业版)链接转换为直接链接,此外,它还可生成一个到
WhatsApp 聊天室的直接链接,其中包含所选的电话号码。</p>
<h2>用法</h2>
<ul>
<li>选择或复制共享的 Dropbox、Google Drive 或 oneDrive 链接</li>
<li>按 Alt+NVDA+l 转换链接。
转换后的链接将复制到剪贴板。</li>
<li>同样,对于电话号码,复制或选择要聊天或共享的号码,然后按相同的快捷键 Alt+NVDA+L。</li>
<li>如果要在浏览器中打开结果链接,请按 Alt+NVDA+Shift+l。</li>
</ul>
<h2>为什么要用直接链接?</h2>
<p>如果您在浏览器中打开它,直接链接将允许您直接打开保存对话框,而不会被如何在托管公司的下载页面找到下载链接所困扰。此外,直接链接可用于在某些程序(如媒体播放器)中流式传输文件或查看文件(如果支持)。同样,如果
WhatsApp
在您所在的国家或地区很常见,而不是在您需要与某人聊天时每次都创建一个新联系人,无论是客户还是技术支持,您只需选择该号码或复制它并立即开始聊天。更重要的是,如果您作为自由职业者工作时,人们通常需要与您联系,您可以分享您自己号码的
WhatsApp 链接。</p>
<h2>注意</h2>
<ul>
<li>指向文件夹的链接无法转换;链接必须指向一个文件。</li>
<li>确保您共享的链接是公开的(知道链接的任何人都可以访问),以便成功转换。</li>
<li>您可以从 NVDA 菜单 > 选项 > 按键与手势更改热键。</li>
<li>如果您发现未检测到某种格式的电话号码,您可给我发送电子邮件并附上示例。</li>
<li>Google 云端硬盘中的某些类型和大小的文件可能会将您带到显示“Google
云端硬盘无法扫描此文件以查找病毒”的页面。在这种情况下,您必须单击无论如何下载链接。</li>
</ul>
<h2>致谢</h2>
<p>非常感谢以下朋友,没有他们,我不可能成功:</p>
<ul>
<li>Qais Alrefai 测试插件并为我提供了详细的测试报告,以及他对插件的观察和总体想法。</li>
<li>Marina Amir 将插件翻译成法语、语言编辑和测试。</li>
<li>Riad Assoum 把附件翻译成阿拉伯语。</li>
<li>所有测试人员。</li>
</ul>
取消系统静音http://addons.nvda-project.org/addons/unmute.zh_CN.html2023-07-15T02:39:11Z2021-06-08T03:54:01Z
<ul>
<li>作者: Oleksandr Gryshchenko</li>
<li>版本: 1.5</li>
<li>NVDA 兼容版本: 2019.3 及更高</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=unmute">稳定版</a></li>
</ul>
<p>这个插件会在 NVDA 启动时检查 Windows 音频系统的状态。如果声音被静音,此插件会将其打开。</p>
<p>同时会单独检查NVDA 进程的音量级别。</p>
<p>该插件还可以检查语音合成器驱动程序的状态。 如果语音合成器初始化存在问题,则会尝试启动 NVDA 设置中指定的合成器。</p>
<p>还有一个功能是检查 NVDA 的默认声音输出设备 如果此设备不是系统默认的设备,则插件会自动切换回系统默认设备。</p>
<p>注意:每次启动 NVDA 时,插件都会将声音切换到 Windows 默认输出设备。</p>
<p>当 NVDA 的输出设备不是“默认输出设备”或“Microsoft 声音映射器”时会进行该调整。</p>
<p>当然,您可以通过以下两种方式调整或禁用该功能:</p>
<ol>
<li>重新启动NVDA后,只需使用NVDA + Ctrl + C保存当前配置。默认音频设备将保存在NVDA设置中,并且每次 NVDA
启动时都不会自动切换。</li>
<li>如果您不想通过上面方法更改 NVDA 配置,那么只需在 NVDA 设置面板中的“取消系统静音”类别下禁用“切换到默认声音输出设备”功能即可。</li>
</ol>
<h2>插件设置对话框</h2>
<p>要打开插件设置面板,请按照下列步骤操作:</p>
<ul>
<li>按NVDA + N打开NVDA菜单。</li>
<li>找到“选项” ➡ “设置...”,然后在类别列表中找到“取消系统静音”。</li>
</ul>
<p>这样,您现在可以使用 Tab 键在插件的设置中移动。</p>
<p>插件设置对话框中提供以下选项:</p>
<ol>
<li><p>插件设置对话框中的第一个滑块允许您指定恢复到的音量级别,如果系统音量被静音或低于相应级别,则在 NVDA 启动时恢复到该音量。</p></li>
<li><p>当音量小于或等于以下值时也会增大音量。</p>
<p> 如果音量小于或等于此处指定的值,则下次启动NVDA时音量将增大。</p>
<p> 如果音量大于此处指定的值,插件则不会调整
。</p>
<p> 当然,如果系统音量被静音,则重新启动 NVDA 时无论如何都会自动恢复。</p></li>
<li><p>尝试初始化语音合成器驱动程序。</p>
<p> 仅当在 NVDA 启动且检测到语音合成器驱动程序尚未初始化时,才尝试该操作。</p></li>
<li><p>尝试次数,在这里,您可以指定尝试重新初始化语音合成器驱动程序的次数。 值为 0 表示无限次尝试,直到完成该过程。</p></li>
<li><p>“切换到默认声音输出设备” 该选项允许在启动时检查NVDA 声音的输出设备。 如果检查到不是默认的声音输出设备,则插件会自动切换。</p></li>
<li><p>成功恢复音量后播放声音。此复选框允许在操作成功时打开或关闭播放启动声音。</p></li>
</ol>
<h2>第三方组件</h2>
<p>此插件使用以下第三方组件:</p>
<ul>
<li>使用了基于 MIT 许可证的 <strong>Windows Core Audio API</strong> - <a href="https://github.com/AndreMiras/pycaw/">PyCaw
模块</a>。</li>
<li>使用了基于 BSD-3 许可证的 <a href="https://github.com/giampaolo/psutil">psutil 模块</a>
来获取相关的进程和 PyCaw 组件信息。</li>
</ul>
<h2>升级日志</h2>
<h3>1.5.5版</h3>
<ul>
<li>此插件通过了与 NVDA 2021.1 的兼容性测试;</li>
<li>更新了第三方psutil模块;</li>
<li>使插件同时兼容 python3.7和3.8版;</li>
<li>在插件源代码中添加了 MyPy 类型注释;</li>
<li>添加了“切换到默认声音输出设备”功能。</li>
<li>插件的设置参数始终存储在基本配置文件中。</li>
</ul>
<h3>1.4版</h3>
<ul>
<li>增加了针对 NVDA 进程单独增加启动音量的方法;</li>
<li>更改了成功恢复音量后的音效(感谢Manolo);</li>
<li>所有的音量控制功能已转移到“volumeAdjustment”插件中。</li>
</ul>
<h3>1.3版</h3>
<ul>
<li>增加了控制主音量的功能,还可分别针对每个正在运行的应用程序进行控制;</li>
<li>更新了越南语的翻译(感谢 Dang Manh Cuong);</li>
<li>添加了土耳其语的翻译(感谢 Cagri Dogan);</li>
<li>添加了意大利语的翻译(感谢 Christianlm);</li>
<li>添加了简体中文翻译(感谢 Cary Rowen);</li>
<li>添加了波兰语翻译(感谢 Stefan Banita);</li>
<li>更新了乌克兰语的翻译;</li>
<li>更新了自述文件。</li>
</ul>
<h3>1.2版</h3>
<ul>
<li>使用了 Core Audio Windows API 以代替 Windows Sound Manager;</li>
<li>添加了通过插件成功打开音频后播放声音;</li>
</ul>
<h3>1.1版</h3>
<ul>
<li>添加了插件设置对话框;</li>
<li>更新了乌克兰语翻译。</li>
</ul>
<h3>1.0.1版</h3>
<ul>
<li>在语音合成器初始化失败时,反复尝试恢复语音合成器;</li>
<li>添加了越南语翻译(感谢 Dang Manh Cuong);</li>
<li>添加了乌克兰语翻译。</li>
</ul>
<h3>1.0版</h3>
<p>此插件使用了第三方模块Windows Sound Manager。</p>
<h2>修改插件源代码</h2>
<p>你可以克隆这个插件的 repo 对插件进行修改。</p>
<h3>第三方依赖</h3>
<p>这些可以用 pip 安装:</p>
<ul>
<li>markdown</li>
<li>scons</li>
<li>python-gettext</li>
</ul>
<h3>要将插件打包并发布。</h3>
<ol>
<li>打开命令行,更改到这个 repo 的根目录。</li>
<li>运行<strong>scons</strong>命令。如果没有错误的话,创建的插件就会存放在当前目录下。</li>
</ol>
插件和向后不兼容的 NVDA 版本http://addons.nvda-project.org/addons/nvdacompat.zh_CN.html2024-02-13T14:37:20Z2021-06-01T07:39:10Z
<p>注意:本文档基于较早的 <a href="https://addons.nvda-project.org/addons/nvdapy3.zh_CN.html">NVDA 插件和 Python
3</a>
文档,由于历史原因,该文档也可以使用。</p>
<p>本页旨在记录与NVDA 最新向后不兼容版本兼容的插件,以及强调它们在本网站上的可用性状态。</p>
<h2>关于 NVDA 向后不兼容版本的插件,您需要了解的内容</h2>
<p>每年 NV Access 可能会发布一个向后不兼容的 NVDA 版本,通常是第一个主要版本(year.1)。此处,“向后不兼容”是指 NVDA 版本由于
API 更改而使插件不兼容。发生这种情况时,作者必须测试其插件的兼容性并相应地发布更新。</p>
<p>正如 NVDA 用户指南中提到的:</p>
<p>不兼容的插件管理器,可以通过插件管理器中的“查看不兼容的插件”按钮访问,允许你检查任何不兼容的插件,以及它们被认为不兼容的原因。如果插件没有被更新以适应
NVDA 的重大变化,或者它们依赖的功能在你使用的 NVDA 版本中不可用,则被视为不兼容。不兼容的插件管理器有一个简短的信息来解释其目的以及 NVDA
的版本。</p>
<p>不兼容的插件管理器还有一个“关于插件...”按钮。此对话框将为您提供插件的完整详细信息,这在联系插件作者时很有帮助。</p>
<h3>向后不兼容的 NVDA 版本的主要变化</h3>
<p>以下是向后不兼容的 NVDA 版本列表以及每个版本的关键更改:</p>
<ul>
<li>2019.3:Python 2 到 3,语音重构</li>
<li>2021.1:代码重构,wxPython 4.1.1</li>
<li>2022.1:控件类型重构</li>
<li>2023.1(当前):安全和语音变更</li>
</ul>
<p>插件作者注意:当向后不兼容的 NVDA 版本进入 beta 测试阶段(随着 beta 1
的发布),请务必测试您的插件并报告您的下一步行动,可以通过各种渠道(包括插件讨论组、NVDA用户讨论组、Facebook、Twitter等)向 NVDA
社区发布更新计划和发布公告。另外,在 GitHub 上的 nvaccess/addon-datastore 提交插件,以便将新版插件发布在此网站上。</p>
<p>除非另有说明,否则本页面列出的插件将根据最新向后不兼容的 NVDA (2023.1) 确认其可用性。</p>
<h2>与 NVDA 2023.1 的兼容状态及其可用性</h2>
<p>以下是此网站上托管的插件列表(在稳定部分)。该列表还包括插件作者的联系信息。</p>
<h3>注意:</h3>
<ul>
<li>插件的兼容性状况可能会发生变化,恕不另行通知。</li>
<li>如果你不知道你在做什么,请不要改变不兼容的插件的 manifest.ini 文件,因为这可能会导致不可预知的行为,例如使 NVDA 变得不稳定。</li>
<li>当维护人员要求通过 Pull Request 或插件商店提交在网站上发布插件或发布测试版插件兼容性的计划时,这将呈现为“即将发布到网站”。</li>
<li>如果插件被标记为不再维护,请联系作者进行插件维护。</li>
</ul>
<h3>Access8Math数学插件</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>联系: Tseng Woody <a href="mailto:tsengwoody.tw@gmail.com">tsengwoody.tw@gmail.com</a></li>
</ul>
<h3>插件更新器</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>联系: Joseph Lee <a href="mailto:joseph.lee22590@gmail.com">joseph.lee22590@gmail.com</a></li>
</ul>
<h3>插件文档</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>Contact: Rui Fontes <a href="mailto:rui.fontes@tiflotecnia.com">rui.fontes@tiflotecnia.com</a>, Zougane, Rémy and Abdel</li>
</ul>
<h3>文本元素计数器</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>联系: Rui Fontes <a href="mailto:rui.fontes@tiflotecnia.com">rui.fontes@tiflotecnia.com</a></li>
</ul>
<h3>应用程序字典</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>联系: Rui Fontes <a href="mailto:rui.fontes@tiflotecnia.com">rui.fontes@tiflotecnia.com</a>、 Ricardo Leonarczyk
<a href="mailto:ricardo.leonarczyk95@gmail.com">ricardo.leonarczyk95@gmail.com</a> 和 Cyrille Bougot</li>
</ul>
<h3>键盘提示音</h3>
<ul>
<li>兼容:否</li>
<li>联系: David CM <a href="mailto:dhf360@gmail.com">dhf360@gmail.com</a></li>
</ul>
<h3>蓝牙音频</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>联系: Tony Malykh <a href="mailto:anton.malykh@gmail.com">anton.malykh@gmail.com</a></li>
</ul>
<h3>BrailleExtender盲文支持插件</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>Contact: André-Abush Clause <a href="mailto:dev@andreabc.net">dev@andreabc.net</a></li>
</ul>
<h3>浏览器导航</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>联系: Tony Malykh <a href="mailto:anton.malykh@gmail.com">anton.malykh@gmail.com</a></li>
</ul>
<h3>NVDACalibre图书支持插件</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>联系: Javi Dominguez <a href="mailto:fjavids@gmail.com">fjavids@gmail.com</a></li>
</ul>
<h3>字符信息</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>联系: Cyrille Bougot <a href="mailto:cyrille.bougot2@laposte.net">cyrille.bougot2@laposte.net</a></li>
</ul>
<h3>按键或首饰检查</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>联系: Oleksandr Gryshchenko <a href="mailto:grisov.nvaccess@mailnull.com">grisov.nvaccess@mailnull.com</a></li>
</ul>
<h3>经典选择</h3>
<ul>
<li>兼容:否</li>
<li>联系: Tyler Spivey <a href="mailto:tspivey@pcdesk.net">tspivey@pcdesk.net</a></li>
</ul>
<h3>剪辑内容设计器</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>Contact: Noelia Ruiz Martínez <a href="mailto:nrm1977@gmail.com">nrm1977@gmail.com</a></li>
</ul>
<h3>Clipspeak剪贴板插件</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>Contact: Rui Fontes, Ângelo Abrantes, Abel Passos Júnior and colaboration
of Noelia Ruiz Martínez, based on the work of Damien Sykes-Lindley</li>
</ul>
<h3>NVDA 时钟日历插件</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>Contact: Hrvoje Katić <a href="mailto:hrvojekatic@gmail.com">hrvojekatic@gmail.com</a>, Abdel
<a href="mailto:abdelkrim.bensaid@gmail.com">abdelkrim.bensaid@gmail.com</a></li>
</ul>
<h3>按列浏览列表</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>Contact: Alberto Buffolino <a href="mailto:a.buffolino@gmail.com">a.buffolino@gmail.com</a>, Łukasz Golonka
<a href="mailto:lukasz.golonka@mailbox.org">lukasz.golonka@mailbox.org</a>, other contributors</li>
</ul>
<h3>控制台工具包</h3>
<ul>
<li>兼容:否</li>
<li>联系: Tony Malykh <a href="mailto:anton.malykh@gmail.com">anton.malykh@gmail.com</a></li>
</ul>
<h3>Control Usage Assistant-控件使用助理</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>联系: Joseph Lee <a href="mailto:joseph.lee22590@gmail.com">joseph.lee22590@gmail.com</a></li>
</ul>
<h3>Crash Hero错误提示插件</h3>
<ul>
<li>兼容:否</li>
<li>联系: Derek Riemer <a href="mailto:driemer.riemer@gmail.com">driemer.riemer@gmail.com</a></li>
</ul>
<h3>光标定位器</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>Contact: Noelia Ruiz Martínez <a href="mailto:nrm1977@gmail.com">nrm1977@gmail.com</a>, Sergio Gómez Codina
<a href="mailto:gomezcodinasergio@gmail.com">gomezcodinasergio@gmail.com</a></li>
</ul>
<h3>某天星期几</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>Contact: Abdel <a href="mailto:abdelkrim.bensaid@gmail.com">abdelkrim.bensaid@gmail.com</a>, Noelia Ruiz Martínez
<a href="mailto:nrm1977@gmail.com">nrm1977@gmail.com</a></li>
</ul>
<h3>Debug Helper/Dev Helper</h3>
<ul>
<li>兼容:否</li>
<li>注:2021 年更名为 Dev Helper</li>
<li>联系: Luke Davis <a href="mailto:newanswertech@gmail.com">newanswertech@gmail.com</a></li>
</ul>
<h3>开发者工具</h3>
<ul>
<li>兼容:否</li>
<li>联系: Andy Borka <a href="mailto:ajborka@gmail.com">ajborka@gmail.com</a></li>
</ul>
<h3>Direct Link</h3>
<ul>
<li>兼容:否</li>
<li>联系: Fawaz Abdul rahman <a href="mailto:fawaz.ar94@gmail.com">fawaz.ar94@gmail.com</a></li>
</ul>
<h3>Dropbox 支持插件</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>联系: Rui Fontes <a href="mailto:rui.fontes@tiflotecnia.com">rui.fontes@tiflotecnia.com</a>s</li>
</ul>
<h3>Dual Voice-多语音合成器支持插件</h3>
<ul>
<li>兼容:否</li>
<li>联系: Seyed Mahmood Taghavi-Shahri</li>
</ul>
<h3>Easy Table Navigator-简单表格导航插件</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>Contact: Joseph Lee <a href="mailto:joseph.lee22590@gmail.com">joseph.lee22590@gmail.com</a>, Corentin Bacqué-Cazenave
<a href="mailto:corentin@progaccess.net">corentin@progaccess.net</a></li>
</ul>
<h3>表情符号插件</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>Contact: Chris Leo <a href="mailto:llajta2012@gmail.com">llajta2012@gmail.com</a>, Noelia Ruiz Martínez
<a href="mailto:nrm1977@gmail.com">nrm1977@gmail.com</a>, Mesar Hameed <a href="mailto:mesar.hameed@gmail.com">mesar.hameed@gmail.com</a>, Francisco
Javier Estrada Martínez <a href="mailto:Fjestrad@hotmail.com">Fjestrad@hotmail.com</a></li>
</ul>
<h3>eMule-电骡支持插件</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>Contact: Noelia Ruiz Martínez <a href="mailto:nrm1977@gmail.com">nrm1977@gmail.com</a>, Chris
<a href="mailto:llajta2012@gmail.com">llajta2012@gmail.com</a>, Alberto <a href="mailto:a.buffolino@gmail.com">a.buffolino@gmail.com</a></li>
</ul>
<h3>Enhanced Annotations</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>Contact: George Kerscher <a href="mailto:kerscher@montana.com">kerscher@montana.com</a>, Noelia Ruiz Martínez
<a href="mailto:nrm1977@gmail.com">nrm1977@gmail.com</a></li>
</ul>
<h3>增强aria</h3>
<ul>
<li>兼容:否</li>
<li>注意:插件功能已包含在 NVDA 2019.3。</li>
<li>Contact: José Manuel Delicado <a href="mailto:jm.delicado@nvda.es">jm.delicado@nvda.es</a></li>
</ul>
<h3>触摸插件-Enhanced Touch Gestures</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>注:不再维护</li>
<li>联系: Joseph Lee <a href="mailto:joseph.lee22590@gmail.com">joseph.lee22590@gmail.com</a></li>
</ul>
<h3>事件追踪器</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>联系: Luke Davis <a href="mailto:newanswertech@gmail.com">newanswertech@gmail.com</a></li>
</ul>
<h3>extendedWinamp 支持插件</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>Contact: Hrvoje Katić <a href="mailto:hrvojekatic@gmail.com">hrvojekatic@gmail.com</a>, beqa gozalishvili
<a href="mailto:beqaprogger@gmail.com">beqaprogger@gmail.com</a>, NVDA Add-ons Team</li>
</ul>
<h3>焦点突出显示 Focus Highlight</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>联系: Takuya Nishimoto <a href="mailto:nishimotz@gmail.com">nishimotz@gmail.com</a></li>
</ul>
<h3>金色光标</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>联系: Salah Atair <a href="mailto:atair1978@gmail.com">atair1978@gmail.com</a>, Wafeeq Taher, Joseph Lee
<a href="mailto:joseph.lee22590@gmail.com">joseph.lee22590@gmail.com</a>, Abdel <a href="mailto:abdelkrim.bensaid@gmail.com">abdelkrim.bensaid@gmail.com</a></li>
</ul>
<h3>GoldWave 支持插件</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>注:不再维护</li>
<li>联系: Joseph Lee <a href="mailto:joseph.lee22590@gmail.com">joseph.lee22590@gmail.com</a>, David Parduhn
<a href="mailto:xkill85@gmx.net">xkill85@gmx.net</a>, Mesar Hameed <a href="mailto:mhameed@src.gnome.org">mhameed@src.gnome.org</a></li>
</ul>
<h3>忽略空白处的缩进提示</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>联系: Samuel Kacer <a href="mailto:samuel.kacer@gmail.com">samuel.kacer@gmail.com</a></li>
</ul>
<h3>IndentNav-缩进导航插件</h3>
<ul>
<li>兼容:否</li>
<li>联系: Tony Malykh <a href="mailto:anton.malykh@gmail.com">anton.malykh@gmail.com</a></li>
</ul>
<h3>输入锁</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>Contact: José Manuel Delicado <a href="mailto:jm.delicado@nvda.es">jm.delicado@nvda.es</a></li>
</ul>
<h3>及时翻译</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>联系: Alexy Sadovoy aka Lex <a href="mailto:lex@progger.su">lex@progger.su</a>, ruslan <a href="mailto:ru2020slan@yandex.ru">ru2020slan@yandex.ru</a>,
beqa <a href="mailto:beqaprogger@gmail.com">beqaprogger@gmail.com</a>, Mesar Hameed <a href="mailto:mhameed@src.gnome.org">mhameed@src.gnome.org</a>,
Alberto Buffolino <a href="mailto:a.buffolino@gmail.com">a.buffolino@gmail.com</a></li>
</ul>
<h3>强行停止 NVDA</h3>
<ul>
<li>兼容:否</li>
<li>联系: Tyler Spivey <a href="mailto:tspivey@pcdesk.net">tspivey@pcdesk.net</a></li>
</ul>
<h3>Lambda 增强插件</h3>
<ul>
<li>兼容:否</li>
<li>联系: Alberto Zanella, Ivan Novegil</li>
</ul>
<h3>MathCAT</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>联系: Neil Soiffer <a href="mailto:soiffer@alum.mit.edu">soiffer@alum.mit.edu</a></li>
</ul>
<h3>Mozilla Apps增强</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>联系: Javi Dominguez <a href="mailto:fjavids@gmail.com">fjavids@gmail.com</a></li>
</ul>
<h3>mp3DirectCut 支持插件</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>Contact: Abdel, Rémy Ruiz, Abdellah Zineddine, Jean-François Colas</li>
</ul>
<h3>Newfon-俄语,乌克兰语合成器</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>联系: Sergey Shishmintsev, Alexy Sadovoi, Sergey A.K.A. Electrik, Kvark
以及其他开发者</li>
</ul>
<h3>去除蜂鸣声-noBeepsSpeechMode</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>注:新版本仅与 2021.1 及高版本兼容,旧版本适用于旧版 NVDA</li>
<li>联系: Alberto Buffolino <a href="mailto:a.buffolino@gmail.com">a.buffolino@gmail.com</a></li>
</ul>
<h3>Notepad++ 增强插件</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>联系: Derek Riemer <a href="mailto:driemer.riemer@gmail.com">driemer.riemer@gmail.com</a></li>
</ul>
<h3>小键盘模式切换</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>联系: Luke Davis (Open Source Systems, Ltd.) <a href="mailto:newanswertech@gmail.com">newanswertech@gmail.com</a></li>
</ul>
<h3>NVDA Dev & Test Toolbox</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>联系: Cyrille Bougot <a href="mailto:cyrille.bougot2@laposte.net">cyrille.bougot2@laposte.net</a></li>
</ul>
<h3>远程支持</h3>
<ul>
<li>兼容:是(外部链接)</li>
<li>联系: Tyler Spivey <a href="mailto:tspivey@pcdesk.net">tspivey@pcdesk.net</a>, Christopher Toth
<a href="mailto:q@q-continuum.net">q@q-continuum.net</a></li>
</ul>
<h3>取消系统静音</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>联系: Oleksandr Gryshchenko <a href="mailto:grisov.nvaccess@mailnull.com">grisov.nvaccess@mailnull.com</a></li>
</ul>
<h3>NVDA 更新通道选择器</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>联系: Jose Manuel Delicado <a href="mailto:jm.delicado@nvda.es">jm.delicado@nvda.es</a></li>
</ul>
<h3>NV Speech Player.</h3>
<ul>
<li>兼容:否</li>
<li>注意:插件功能已包含在最新版 eSpeak NG 中</li>
<li>联系: NV Access</li>
</ul>
<h3>对象位置音调</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>注:不再维护</li>
<li>联系: Joseph Lee <a href="mailto:joseph.lee22590@gmail.com">joseph.lee22590@gmail.com</a></li>
</ul>
<h3>ObjPad-NVDA简易导航</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>注:不再维护</li>
<li>联系: Joseph Lee <a href="mailto:joseph.lee22590@gmail.com">joseph.lee22590@gmail.com</a></li>
</ul>
<h3>OCR</h3>
<ul>
<li>兼容:否</li>
<li>Contact: Łukasz Golonka <a href="mailto:lukasz.golonka@mailbox.org">lukasz.golonka@mailbox.org</a></li>
</ul>
<h3>Office Desk</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>注:不再维护</li>
<li>联系: Joseph Lee <a href="mailto:joseph.lee22590@gmail.com">joseph.lee22590@gmail.com</a></li>
</ul>
<h3>Outlook 扩展</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>联系: Cyrille Bougot <a href="mailto:cyrille.bougot2@laposte.net">cyrille.bougot2@laposte.net</a>, Ralf Kefferpuetz
<a href="mailto:ralf.kefferpuetz@elra-consulting.de">ralf.kefferpuetz@elra-consulting.de</a></li>
</ul>
<h3>PC键盘盲文输入</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>Contact: Noelia Ruiz Martínez <a href="mailto:nrm1977@gmail.com">nrm1977@gmail.com</a></li>
</ul>
<h3>符号音效</h3>
<ul>
<li>兼容:否</li>
<li>联系: Tony Malykh <a href="mailto:anton.malykh@gmail.com">anton.malykh@gmail.com</a></li>
</ul>
<h3>位置标记</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>Contact: Noelia Ruiz Martínez <a href="mailto:nrm1977@gmail.com">nrm1977@gmail.com</a>, Chris
<a href="mailto:llajta2012@gmail.com">llajta2012@gmail.com</a></li>
</ul>
<h3>NVDA 代理支持</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>联系: Jose Manuel Delicado <a href="mailto:jm.delicado@nvda.es">jm.delicado@nvda.es</a></li>
</ul>
<h3>Quick Dictionary</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>联系: Oleksandr Gryshchenko <a href="mailto:grisov.nvaccess@mailnull.com">grisov.nvaccess@mailnull.com</a></li>
</ul>
<h3>快捷笔记</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>联系:Eilana Benish <benish.ilana@gmail.com, Mohammad Suliman
<a href="mailto:mohmad.s93@gmail.com">mohmad.s93@gmail.com</a></li>
</ul>
<h3>Read Feeds-RSS阅读插件</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>Contact: Noelia Ruiz Martínez <a href="mailto:nrm1977@gmail.com">nrm1977@gmail.com</a>, Mesar Hameed</li>
</ul>
<h3>读出密码</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>Contact: Noelia Ruiz Martínez <a href="mailto:nrm1977@gmail.com">nrm1977@gmail.com</a></li>
</ul>
<h3>朗读符号</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>Contact: Noelia Ruiz Martínez <a href="mailto:nrm1977@gmail.com">nrm1977@gmail.com</a></li>
</ul>
<h3>资源监控器</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>联系: Kefas Lungu</li>
</ul>
<h3>浏览光标复制器</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>联系: Tuukka Ojala <a href="mailto:tuukka.ojala@gmail.com">tuukka.ojala@gmail.com</a></li>
</ul>
<h3>sayCurrentKeyboardLanguage-语言显示插件</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>联系: Abdel <a href="mailto:abdelkrim.bensaid@gmail.com">abdelkrim.bensaid@gmail.com</a>, Noelia <a href="mailto:nrm1977@gmail.com">nrm1977@gmail.com</a></li>
</ul>
<h3>程序名称和版本朗读</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>联系: Luke Davis <a href="mailto:XLTechie@newanswertech.com">XLTechie@newanswertech.com</a></li>
</ul>
<h3>Screenshots wizard</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>Contact: Javi Domínguez <a href="mailto:fjavids@gmail.com">fjavids@gmail.com</a></li>
</ul>
<h3>快捷搜索</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>联系: Ibrahim Hamadeh <a href="mailto:ibra.hamadeh@hotmail.com">ibra.hamadeh@hotmail.com</a></li>
</ul>
<h3>SentenceNav-句子导航</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>联系: Tony Malykh <a href="mailto:anton.malykh@gmail.com">anton.malykh@gmail.com</a></li>
</ul>
<h3>Skype</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>联系: Doug Lee</li>
</ul>
<h3>声音分离器</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>联系: Luke Davis <a href="mailto:newanswertech@gmail.com">newanswertech@gmail.com</a></li>
</ul>
<h3>密码朗读器</h3>
<ul>
<li>兼容:否</li>
<li>联系: Tyler Spivey <a href="mailto:tspivey@pcdesk.net">tspivey@pcdesk.net</a></li>
</ul>
<h3>朗读历史</h3>
<ul>
<li>兼容:是(即将在网站上发布)</li>
<li>联系: Tyler Spivey <a href="mailto:tspivey@pcdesk.net">tspivey@pcdesk.net</a>, James Scholes</li>
</ul>
<h3>语音记录器</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>联系: Luke Davis <a href="mailto:XLTechie@newanswertech.com">XLTechie@newanswertech.com</a></li>
</ul>
<h3>StationPlaylist 增强插件</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>注:不再维护</li>
<li>联系: Geoff Shang, Joseph Lee and other contributors</li>
</ul>
<h3>Switch synth - 语音合成器切换插件</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>联系: Tyler Spivey <a href="mailto:tspivey@pcdesk.net">tspivey@pcdesk.net</a></li>
</ul>
<h3>语音合成设置选择器</h3>
<ul>
<li>兼容:否</li>
<li>联系: David CM <a href="mailto:dhf360@gmail.com">dhf360@gmail.com</a></li>
</ul>
<h3>systrayList托盘图标插件</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li><p>联系: Rui Fontes <a href="mailto:rui.fontes@tiflotecnia.com">rui.fontes@tiflotecnia.com</a>, Rui Batista
<a href="mailto:ruiandrebatista@gmail.com">ruiandrebatista@gmail.com</a>, Joseph Lee <a href="mailto:joseph.lee22590@gmail.com">joseph.lee22590@gmail.com</a>, NVDA
Community Contributors</p>
<h3>TeamTalk Classic无障碍插件</h3></li>
<li><p>兼容:是(外部链接)</p></li>
<li>注:不再维护</li>
<li>联系: Doug Lee with initial work by Tyler Spivey and others</li>
</ul>
<h3>Tele NVDA 远程协助</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>Contact: Asociación Comunidad Hispanohablante de NVDA <a href="mailto:contacto@nvda.es">contacto@nvda.es</a>
and other contributors, Original work by Tyler Spivey
<a href="mailto:tspivey@pcdesk.net">tspivey@pcdesk.net</a>, Christopher Toth <a href="mailto:q@q-continuum.net">q@q-continuum.net</a></li>
</ul>
<h3>TesseractOCR</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>Contact: Rui Fontes <a href="mailto:rui.fontes@tiflotecnia.com">rui.fontes@tiflotecnia.com</a>, Ângelo Abrantes
<a href="mailto:ampa4374@gmail.com">ampa4374@gmail.com</a> and Abel Passos do Nascimento
Jr. <a href="mailto:abel.passos@gmail.com">abel.passos@gmail.com</a></li>
</ul>
<h3>文本信息</h3>
<ul>
<li>兼容:否</li>
<li>联系: Carter Temm <a href="mailto:crtbraille@gmail.com">crtbraille@gmail.com</a></li>
</ul>
<h3>文本导航</h3>
<ul>
<li>兼容:否</li>
<li>联系: Tony Malykh <a href="mailto:anton.malykh@gmail.com">anton.malykh@gmail.com</a></li>
</ul>
<h3>Thunderbird+</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>Contact: Pierre-Louis Renaud (Thunderbird v. 78 to 102), Daniel Poiraud
(TB v. 68 to 91), Abdelkrim Bensaïd for a part of TB 78, Yannick (TB v. 38
to 60)</li>
</ul>
<h3>时区插件 Time Zoner</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>联系: Munawar Bijani</li>
</ul>
<h3>每日提示</h3>
<ul>
<li>兼容:否</li>
<li>联系: Derek Riemer <a href="mailto:driemer.riemer@gmail.com">driemer.riemer@gmail.com</a></li>
</ul>
<h3>Tony 的增强插件</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>联系: Tony Malykh <a href="mailto:anton.malykh@gmail.com">anton.malykh@gmail.com</a></li>
</ul>
<h3>ToolbarsExplorer工具栏快速导航</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>联系: Alberto Buffolino <a href="mailto:a.buffolino@gmail.com">a.buffolino@gmail.com</a></li>
</ul>
<h3>NVDA命令终结者</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>联系: Ibrahim Hamadeh <a href="mailto:ibra.hamadeh@hotmail.com">ibra.hamadeh@hotmail.com</a></li>
</ul>
<h3>Unicode盲文输入</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>联系: Mesar Hameed <a href="mailto:mhameed@src.gnome.org">mhameed@src.gnome.org</a>, Patrick ZAJDA
<a href="mailto:patrick@zajda.fr">patrick@zajda.fr</a>, Leonard de Ruijter (Babbage B.V.)
<a href="mailto:leonard@babbage.com">leonard@babbage.com</a></li>
</ul>
<h3>UnigramPlus</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>联系: Kostya Gladkiy <a href="mailto:gladkiy.kostya@gmail.com">gladkiy.kostya@gmail.com</a></li>
</ul>
<h3>URL 压缩器</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>Contact: Noelia Ruiz Martínez <a href="mailto:nrm1977@gmail.com">nrm1977@gmail.com</a></li>
</ul>
<h3>Virtual Audio Cable</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>联系: Doug Lee</li>
</ul>
<h3>虚拟浏览</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>联系: Rui Batista <a href="mailto:ruiandrebatista@gmail.com">ruiandrebatista@gmail.com</a> and NVDA Addon Team</li>
</ul>
<h3>VLC 媒体播放器</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>联系: Javi Dominguez <a href="mailto:fjavids@gmail.com">fjavids@gmail.com</a></li>
</ul>
<h3>Vocalizer</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>联系: Tiflotecnia, LDA. <a href="mailto:tiflotecnia@tiflotecnia.com">tiflotecnia@tiflotecnia.com</a></li>
</ul>
<h3>天气 +</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>联系: Adriano Barbieri <a href="mailto:adrianobarb@yahoo.it">adrianobarb@yahoo.it</a></li>
</ul>
<h3>WhatsAppPlus</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>联系: Kostya Gladkiy<a href="mailto:gladkiy.kostya@gmail.com">gladkiy.kostya@gmail.com</a></li>
</ul>
<h3>Windows 应用增强</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>联系: Joseph Lee <a href="mailto:joseph.lee22590@gmail.com">joseph.lee22590@gmail.com</a>, Derek Riemer
<a href="mailto:driemer.riemer@gmail.com">driemer.riemer@gmail.com</a> and others</li>
</ul>
<h3>Windows 放大镜增强插件</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>联系: Cyrille Bougot <a href="mailto:cyrille.bougot2@laposte.net">cyrille.bougot2@laposte.net</a></li>
</ul>
<h3>Win Wizard-窗口管理</h3>
<ul>
<li>兼容:否</li>
<li>Contact: Oriol Gomez <a href="mailto:ogomez.s92@gmail.com">ogomez.s92@gmail.com</a>, Łukasz Golonka
<a href="mailto:lukasz.golonka@mailbox.org">lukasz.golonka@mailbox.org</a></li>
</ul>
<h3>文本导航WordNav</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>联系: Tony Malykh <a href="mailto:anton.malykh@gmail.com">anton.malykh@gmail.com</a></li>
</ul>
<h3>Zoom 无障碍增强</h3>
<ul>
<li>兼容:是(已在网站上更新)</li>
<li>联系: Mohammad Suliman <a href="mailto:mohmad.s93@gmail.com">mohmad.s93@gmail.com</a>, Eilana Benish
<a href="mailto:benish.ilana@gmail.com">benish.ilana@gmail.com</a></li>
</ul>
按键或手势检查http://addons.nvda-project.org/addons/checkGestures.zh_CN.html2023-05-19T22:38:50Z2021-05-26T17:24:18Z
<ul>
<li>作者: Oleksandr Gryshchenko</li>
<li>版本: 1.0</li>
<li>NVDA兼容性: 2019.3 及以后</li>
<li>下载<a href="https://www.nvaccess.org/addonStore/legacy?file=checkGestures">稳定版</a></li>
</ul>
<p>查找并修正 NVDA (包括插件)中的按键与手势冲突。通用术语 “按键与手势”包括键盘按键、盲文点显器的按键以及触摸屏手势(之前NVDA
简体中文译为“输入手势”)。</p>
<p>每个已安装的插件都可以通过添加或重新分配现有的按键或手势。如果相同的按键或手势被绑定到多个功能上,则无法使用其中某个或某些功能。</p>
<h2>重复的按键与手势搜索</h2>
<p>要检查重复的按键或手势,请转到 “NVDA菜单”的“工具”子菜单,然后进入“按键与手势检查”,点击其中的 “重复按键或手势搜索...”。</p>
<p>随后,插件将按以下顺序检查 NVDA 中 已注册的所有按键与手势。</p>
<ol>
<li>globalCommands</li>
<li>globalPlugins</li>
</ol>
<p>如果检测到了相同的按键或手势,并且被分配给了多个不同的功能,此时将显示一个单独的对话框,其中会显示一个列表用于列出这些重复的按键或手势(译者注:
该列表可以用 NVDA 的表格导航阅读)。</p>
<p>在选中的列表项目上按回车键,标准的 NVDA 按键与手势对话框会被打开,并且相应的功能会被自动选中,你可以对其进行修改,删除等。</p>
<p>注意: 如你所知,没有文本说明的功能不会出现在 “按键与手势”对话框内。因此,当您激活这样的项目时,则会显示一个警告。</p>
<h2>无说明的按键或手势</h2>
<p>要查看没有文本说明的按键或手势,请转到 “NVDA菜单”的“工具”子菜单,然后进入“按键与手势检查”,点击其中的 “无说明的按键或手势...”。</p>
<p>这类手势功能不会出现在标准的NVDA “按键与手势”对话框内,所以暂时也不能对他们进行删除或修改。</p>
<h2>帮助</h2>
<p>查看本帮助的其中一种方法是打开“NVDA菜单”的“工具”子菜单,然后进入“按键与手势检查”,点击其中的 “帮助”。</p>
<p>注意:本插件的所有功能都显示在 NVDA “按键与手势”对话框内,你可以为每个功能分配所需的快捷键。</p>
<h2>贡献</h2>
<p>我们非常感谢每一个为开发、翻译和维护这个插件做出过贡献的人。</p>
<ul>
<li>Wafiqtaher - 阿拉伯语翻译。</li>
<li>Angelo Miguel Abrantes - 葡萄牙语翻译。</li>
<li>Cagri Dogan - 土耳其语翻译。</li>
</ul>
<h2>更新日志</h2>
<h3>1.0版</h3>
<ul>
<li>实现了搜索重复按键或手势的功能。</li>
<li>实现了搜索无说明的按键或手势的功能。</li>
</ul>
<h2>改进 NVDA 按键与手势检查的功能</h2>
<p>你可以克隆这个 repo 对 NVDA 按键与手势检查的功能进行修改。</p>
<h3>第三方依赖</h3>
<p>这些可以用 pip 安装。</p>
<ul>
<li>markdown</li>
<li>scons</li>
<li>python-gettext</li>
</ul>
<h3>要将插件打包并发布。</h3>
<ol>
<li>打开命令行,更改到这个 repo 的根目录。</li>
<li>运行<strong>scons</strong>命令。如果没有错误的话,创建的插件就会存放在当前目录下。</li>
</ol>
WordNavhttp://addons.nvda-project.org/addons/wordNav.zh_CN.html2023-05-10T20:38:32Z2021-05-07T05:30:37Z
<ul>
<li>Author: Tony Malykh</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=wordnav">stable version</a></li>
<li>NVDA compatibility: 2019.3 and later</li>
</ul>
<p>WordNav NVDA add-on improves built-in navigation by word, as well as adds
extra word navigation commands with different definition for the word.</p>
<p>Most text editors support Control+LeftArrow/RightArrow commands for word
navigation. However the definition of the word changes from one program to
another. This is especially true of modern web-based text editors, such as
Monaco. NVDA should know the definition of word in given program in order to
speak words correctly. If NVDA doesn't know the exact definition, then
either words are going to be skipped, or pronounced multiple
times. Moreover, some web-based text editors position the cursor in the end
of the word, instead of the beginning, making editing much harder for
visually impaired users. In order to combat this problem I have created
enhanced word navigation commands, that take the word definition from
Notepad++ and they do not rely on program's definition of words, but rather
parse lines into words on NVDA's side. The Control+LeftArrow/RightArrow
gesture is not even sent to the program, thus ensuring the consistency of
the speech.</p>
<p>Please note that a prototype of WordNav was formerly a part of <a href="https://github.com/mltony/nvda-tonys-enhancements/">Tony's
enhancements</a>
add-on. Please either uninstall it or upgrade to <a href="https://github.com/mltony/nvda-tonys-enhancements/releases/latest/download/tonysEnhancements.nvda-addon">Tony's enhancements latest
stable
version</a>
to avoid conflicts.</p>
<p>Currently WordNav supports four definitions of the word, assigned to
different gestures:</p>
<ul>
<li><code>Left Control+Arrows</code>: Notepad++ definition, that treats alphanumeric
characters as words, and adjacent punctuation marks are also treated as
words. This should be the most convenient word definition for the majority
of users.</li>
<li><code>RightControl+Arrows</code>: Fine word definition splits <code>camelCaseIdentifiers</code>
and <code>underscore_separated_identifiers</code> into separate parts, thus allowing
the cursor to go into long identifiers.</li>
<li><code>LeftControl+Windows+Arrows</code>: Bulky word definition treats almost all
punctuation symbols adjacent to text as part of a single word, therefore
it would treat paths like <code>C:\directory\subdirectory\file.txt</code> as a single
word.</li>
<li><code>RightControl+Windows+Arros</code>: Multiword definition, that groups several
words together. The amount of words is configurable.</li>
</ul>
<p>Gestures can be customized in WordNav settings panel.</p>
<h2>Notes</h2>
<ul>
<li>At this time WordNav doesn't modify <code>Control+Shift+LeftArrow/RightArrow</code>
gestures to select words, since implementation of such commands are
significantly more complicated.</li>
<li>If you would like to use virtual desktops feature of Windows 10, please
remember to disable Control+Windows+Arrows keyboard shortcuts either in
WordNav Settings panel, or in NVDA Input gestures dialog.</li>
<li>WordNav doesn't work reliably in VSCode, since due to its internal
optimizations, VSCode presents only a few lines of file contents at a
time, that change dynamically, and this occasionally interferes with
WordNav algorithm.</li>
</ul>
Win Wizard-窗口管理http://addons.nvda-project.org/addons/winWizard.zh_CN.html2024-03-23T16:52:33Z2021-04-28T11:10:21Z
<ul>
<li>Author: Oriol Gómez, Łukasz Golonka, current maintenance by Jakub Lukowicz</li>
<li>NVDA兼容性: 2019.3及以上</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=winwizard">稳定版</a></li>
</ul>
<p>This add-on allows you to perform some operations on the focused window or
the process associated with it. When killing a process, or showing / hiding
a window a confirmation beep is played when the action succeeds. If you
find this annoying you can disable these beeps in the Win Wizard's settings
panel available from NVDA's settings dialog.</p>
<h2>快捷键:</h2>
<p>以下快捷键都可以在“输入手势”下的“窗口管理”类别下重新设置。</p>
<h3>隐显窗口:</h3>
<ul>
<li>NVDA + Windows + 从1到0的数字——在与所按数字相对应的位置隐藏当前所聚焦的窗口(再次按下则显示)。</li>
<li>NVDA + Windows + 左光标——移至上一个隐藏窗口分组。</li>
<li>NVDA + Windows + 右光镖——移至下一个隐藏窗口分组。</li>
<li>Windows + Shift + H——隐藏当前窗口至第一个可用位置。</li>
<li>NVDA + Windows + H——显示最后一个被隐藏的窗口。</li>
<li>Windows + Shift + L——打开一个对话框,将被隐藏的窗口按分组显示在列表内(默认选中最后一个隐藏的窗口)。</li>
</ul>
<h3>进程管理</h3>
<ul>
<li>Windows + F4——结束与当前所聚焦窗口关联的进程。</li>
<li>NVDA + Windows + P——打开一个对话框来设置与当前所聚焦窗口关联的进程优先级。</li>
</ul>
<h3>其他命令:</h3>
<ul>
<li>NVDA+Windows+TAB - switches between top level windows of the current
program (useful in foobar2000, Back4Sure etc.)</li>
<li>CTRL + ALT + T——打开更改当前窗口标题的对话框。</li>
</ul>
<h2>更新:</h2>
<h3>Changes for 5.0.6:</h3>
<ul>
<li>Compatibility with NVDA 2024.1</li>
<li>Update translations</li>
</ul>
<h3>Changes for 5.0.5:</h3>
<ul>
<li>Compatibility with NVDA 2023.2</li>
<li>Update translations</li>
</ul>
<h3>Changes for 5.0.4:</h3>
<ul>
<li>Compatibility with NVDA 2022.1</li>
<li>It is now possible to disable confirmation beeps in the add-ons settings
panel</li>
<li>Update translations</li>
</ul>
<h3>5.0.3 的更新:</h3>
<ul>
<li>兼容 NVDA 2021.1</li>
</ul>
<h3>5.0.2 的更新:</h3>
<ul>
<li>First release available from the add-ons website</li>
</ul>
Console Toolkithttp://addons.nvda-project.org/addons/consoleToolkit.zh_CN.html2024-02-13T14:35:33Z2021-04-28T11:09:48Z
<ul>
<li>Author: Tony Malykh</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=consoletoolkit">stable version</a></li>
<li>NVDA compatibility: 2019.3 and later</li>
</ul>
<p>Console Toolkit is NVDA add-on, that provides accessibility improvements for
Windows console, also known as Command prompt. It also works well in Windows
PowerShell. Some of the features may work in alternative terminals, such as
Cygwin, PuTTY and Windows Terminal, however, the add-on has only been
carefully tested with the default Windows Console. SSH users might find this
add-on especially handy.</p>
<p>Some of the features were previously part of <a href="https://github.com/mltony/nvda-tonys'enhancements/">Tony's enhancements
add-on</a>.</p>
<h2>Downloads</h2>
<p><a href="https://github.com/mltony/nvda-console-toolkit/releases/latest/download/consoleToolkit.nvda-addon">Console
toolkit</a></p>
<h2>Real-time console speech</h2>
<p>This option makes NVDA to speak new lines immediately as they appear in
console output, instead of queueing new speech utterances. For example, if
NVDA is busy speaking a line that appeared on the screen 1 minute ago, and
now a new line appears, this option will cancel speaking the old line and
start speaking the new line right away, thus providing a more real-time
feedback on what's happening in console window.</p>
<h2>Beep on console updates</h2>
<p>Beep a low pitch impulse every time console text is updated.</p>
<h2>Enforce Control+V in consoles</h2>
<p>This option makes Control+V shortcut to work inside <code>ssh</code> sessions.</p>
<h2>Experimental: command prompt editing</h2>
<p>Note: this feature is experimental. Please read this section carefully and
make sure you understand how it works before reporting issues.</p>
<p>Press <code>NVDA+E</code> to identify current prompt in console window and edit it in
an accessible "Edit prompt" window. After editing you can either press
<code>Escape</code> to update current command line, or <code>Enter</code> to update and
immediately execute command. Alternatively you can press <code>Alt+F4</code> to close
edit prompt window without updating command line.</p>
<p>This feature has been tested in Windows command prompt <code>cmd.exe</code> as well as
in bash shell over ssh connections, as well as in WSL and cygwin. It might
also work in alternative Unix shells, however it hasn't been tested.</p>
<p>Here is how add-on extracts current command.</p>
<ol>
<li>It presses <code>End</code> key and then sends a control character, that is a rare
Unicodecharacter not likely to be used anywhere.</li>
<li>Then it presses <code>home</code> key and sends another control character.</li>
<li>Then it waits for control characters to appear on the screen, which might
take some time on slow SSH connections.</li>
<li>Command is what appears between two control characters.</li>
<li>When "Use UI Automation to access the Windows Console when available"
option is enabled in NVDA settings, it sends one more control character
in the beginning of the string. This is needed to parse multiline
commands correctly: UIA implementation trims whitespaces in the end of
each line, so in order to deduce whether there is a space between two
lines, we need to shift them by one character. Please note, however, that
this way we don't preserve the number of spaces between words, we only
guarantee to preserve the presence of spaces.</li>
<li>Before editing add-on makes sure to remove control characters by placing
cursor in the beginning and end and simulating <code>Delete</code> and <code>Backspace</code>
key presses.</li>
<li>It presents command in "Edit prompt" window for user to view or edit.</li>
<li><p>After user presses <code>Enter</code> or <code>Escape</code>,it first erases current line in
the console. This is achieved via one of four methods, the choice of the
method is configurable. Currently four methods are supported:</p>
<ul>
<li><code>Control+C</code>: works in both <code>cmd.exe</code> and <code>bash</code>, but leaves previous
prompt visible on the screen; doesn't work in emacs; sometimes
unreliable on slow SSH connections</li>
<li><code>Escape</code>: works only in <code>cmd.exe</code>"),</li>
<li><code>Control+A Control+K</code>: works in <code>bash</code> and <code>emacs</code>; doesn't work in
<code>cmd.exe</code></li>
<li><code>Backspace</code> (recommended): works in all environments; however slower
and may cause corruption if the length of the line has changed</li>
</ul>
</li>
<li><p>Then add-on simulates keystrokes to type the updated command and
optionally simulates <code>Enter</code> key press.</p></li>
</ol>
<p>Troubleshooting:</p>
<ul>
<li>Verify that 'Home', 'End', 'Delete' and 'Backspace' keys work as expected
in your console.</li>
<li>Verify that your console supports Unicode characters. Some ssh connections
don't support Unicode.</li>
<li>Verify that selected deleting method works in your console.</li>
</ul>
<h2>Experimental: capturing command output</h2>
<p>Note: this feature is experimental. Please read this section carefully and
make sure you understand how it works before reporting issues.</p>
<p>While in command line or in "Edit prompt" window, press <code>Control+Enter</code> to
capture command output. This add-on is capable of capturing large output
that spans multiple screens, although when output is larger than 10 screens
capturing process takes significant time to complete. Add-on will play a
long chime sound, and it will last as long as the add-on is capturing the
output of currently running command, or until timeout has been
reached. Alternatively, press <code>NVDA+E</code> to interrupt capturing.</p>
<p>When "Use UI Automation to access the Windows Console when available"
feature is enabled in NVDA settings, you can switch to other windows while
capturing is going on. However, if this option is disabled, then NVDA is
using a legacy console code, that only works when consoel is focused, and
therefore switching to any other window will pause capturing.</p>
<p>Command capturing works by redirecting command output to <code>less</code>
command. Default suffix that is appended to commands is:
<code>
|less -c 2>&1
</code>
Please only change it if you know what you're doing. This add-on knows how
to interact with the output of <code>less</code> command to retrieve output page by
page.</p>
<p>On Windows <code>less.exe</code> tool needs to be installed separately. You can install
it via cygwin, or download a windows binary elsewhere.</p>
<p>If you are using <code>tmux</code> or <code>screen</code> in Linux, please make sure that no
status line is displayed in the bottom. In <code>tmux</code> run
<code>
tmux set status off
</code>
to get rid of status line, or modify your <code>tmux.conf</code> file.</p>
<p>Troubleshooting:</p>
<ul>
<li>After a failed output capturing attempt, press <code>UpArrow</code> in the console to
check what command has actually been executed.</li>
<li>Revert back to default capturing suffix, mentioned above.</li>
<li>Try troubleshooting steps from "command prompt editing" section.</li>
</ul>
Quick Dictionaryhttp://addons.nvda-project.org/addons/quickDictionary.zh_CN.html2023-05-10T20:38:33Z2020-12-22T04:09:33Z
<ul>
<li>Author: Oleksandr Gryshchenko</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=quickdictionary">stable version</a></li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=quickdictionary-dev">development version</a></li>
<li>NVDA compatibility: 2019.3 to 2020.3</li>
</ul>
<p>Welcome to NVDA Quick Dictionary addon, which will allow you to quickly get
a dictionary article with the translation of a word or phrase into your
chosen language by pressing a key combination. There are few basic keyboard
shortcuts and they are all intuitive and convenient so you will remember
them quickly.</p>
<p>Dictionary articles contain detailed information about a word, such as part
of speech, gender, plural or singular, translation options, list of
meanings, synonyms and detailed examples. Such information will be useful
for people who are learning foreign languages, or seek to use in
communication all the richness and diversity of their own language.</p>
<p>The add-on supports several online dictionary services. You can select the
desired remote dictionary in the appropriate dialog box or by using keyboard
shortcuts. Each available service has its own settings panel.</p>
<p>There are also advanced opportunities for working with profiles of the voice
synthesizers. You can associate a voice synthesizer profile with a specific
language, after that translations into this language will be automatically
voiced by the selected synthesizer.</p>
<p>Below are all the features of the add-on and keyboard shortcuts to control them. By default all functions are called using two-layer commands. But for any of these methods you can always assign convenient for you keyboard shortcuts. You can do it in the NVDA "Preferences" -> "Input gestures..." dialog.</p>
<h2>Receiving a dictionary article</h2>
<p>In order to get an article from the dictionary, you must first select the
word you are interested in or copy it to the clipboard. Then just press
NVDA+Y twice. There is also another way to get a dictionary entry: pressing
NVDA+Y once switches the keyboard to add-on control mode, then just use the
D key.</p>
<h2>Add-on control mode</h2>
<p>To access all the features of the add-on, you need to switch to add-on
control mode, you can do this by pressing NVDA+Y once. You will hear a short
low beep and will be able to use the other commands described below. When
you press a key that is not used in the add-on, you will hear another signal
notifying you of an erroneous command and the add-on control mode will be
automatically turned off.</p>
<h2>Add-on commands list</h2>
<p>Basic dictionary commands:</p>
<ul>
<li>D - announce a dictionary entry for a selected word or phrase (same as
NVDA+Y);</li>
<li>W - show dictionary entry in a separate browseable window;</li>
<li>S - swap languages and get Quick Dictionary translation;</li>
<li>A - announce the current source and target languages;</li>
<li>C - copy last dictionary entry to the clipboard;</li>
<li>E - edit text before sending;</li>
<li>U - download from online dictionary and save the current list of available
languages;</li>
<li>function keys - select online dictionary service;</li>
<li>Q - statistics on the using the online service;</li>
<li>F - choose online service.</li>
</ul>
<p>Voice synthesizers profiles management:</p>
<ul>
<li>from 1 to 9 - selection of the voice synthesizer profile;</li>
<li>G - announce the selected profile of voice synthesizers;</li>
<li>B - back to previous voice synthesizer;</li>
<li>R - restore default voice synthesizer;</li>
<li>Del - delete the selected voice synthesizer profile;</li>
<li>V - save configured voice synthesizer profile;</li>
<li>P - display a list of all customized voice synthesizers profiles.</li>
</ul>
<p>Press O to open add-on settings dialog.</p>
<h2>Help on add-on commands</h2>
<p>You can see a list of all the commands used in the add-on as follows:</p>
<ul>
<li>Via the NVDA menu - by pressing NVDA+N, go to the submenu "Tools", then -
"Quick Dictionary" and activate the menu item "Help on add-on commands".</li>
<li>Press the H key in add-on control mode (NVDA+Y).</li>
</ul>
<h2>Add-on help</h2>
<p>To open the add-on help - press NVDA+N, go to the "Tools" submenu, then -
"Quick Dictionary" and activate the menu item "Help".</p>
<h2>Contributions</h2>
<p>We are very grateful to everyone who made the effort to develop, translate
and maintain this add-on:</p>
<ul>
<li>Cagri Dogan - Turkish translation;</li>
<li>Wafiqtaher - Arabic translation.</li>
</ul>
<p>Several good solutions from other developments were used in the Quick
Dictionary add-on. Thanks to the authors of the following add-ons:</p>
<ul>
<li>Instant Translate - Alexy Sadovoy, Beqa Gozalishvili, Mesar Hameed,
Alberto Buffolino and other NVDA contributors.</li>
<li>To work with voice synthesizers profiles were used ideas from the Switch
Synth add-on (thanks to Tyler Spivey).</li>
</ul>
<h2>Change log</h2>
<h3>Version 2.1</h3>
<ul>
<li>added a dialog to edit the text before sending to remote service;</li>
<li>separated add-on help page from ReadMe;</li>
<li>Turkish translation added (thanks to Cagri Dogan).</li>
</ul>
<h3>Version 2.0</h3>
<ul>
<li>added the ability to connect other online dictionary services;</li>
<li>added Lexicala service and its settings panel;</li>
<li>added a dialog for choosing an online service from the list of available
ones;</li>
<li>added a command to get information about the selected service;</li>
<li>added a dialog for working with profiles of voice synthesizers;</li>
<li>implemented the procedure for switching to the previous voice synthesizer;</li>
<li>implemented a parallel thread to monitor the state of the synthesizer;</li>
<li>due to an increase in the number of functions in the add-on - help for
commands is now displayed in a separate window;</li>
<li>updated procedure for caching requests to online services;</li>
<li>added add-on submenu to NVDA menu;</li>
<li>updated ReadMe.</li>
</ul>
<h3>Version 1.2</h3>
<ul>
<li>added the ability to automatically switch voice synthesizers for selected
languages;</li>
<li>added the ability to download the current list of languages available in
the online-dictionary;</li>
<li>Turkish translation added thanks to Cagri Dogan.</li>
</ul>
<h3>Version 1.1</h3>
<ul>
<li>changed some keyboard shortcuts which conflicted with other add-ons;</li>
<li>changed the description of the main add-on features;</li>
<li>updated help and translation of the add-on;</li>
<li>removed some keyboard shortcuts and gave to user opportunity to setup them
yourself;</li>
<li>fixed error in Ukrainian translation (thanks to Volodymyr Perig);</li>
<li>added russian translation.</li>
</ul>
<h3>Version 1.0: features of implementation</h3>
<ul>
<li>execution of requests to the remote server in a separate thread to avoid
blocking the operation of NVDA;</li>
<li>signals while waiting for a response from the server;</li>
<li>caching of the last 100 requests to reduce the load on the remote
dictionary service;</li>
<li>switching to add-on control mode;</li>
<li>possibility to use an alternative server;</li>
<li>add-on settings dialog.</li>
</ul>
小键盘模式切换(插件为英语)http://addons.nvda-project.org/addons/numpadNavMode.zh_CN.html2024-03-22T18:27:51Z2020-09-30T21:00:07Z
<h1>Numpad Nav Mode</h1>
<ul>
<li>作者: Luke Davis (Open Source Systems, Ltd.)</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=numpadNavMode">稳定版</a></li>
</ul>
<p>Numpad Nav Mode is an <a href="https://nvaccess.org/">NVDA</a> add-on, which allows you to easily switch
your keyboard's numpad between NVDA's navigation controls and the
non-screenreader Windows navigation controls. This can be especially useful
for users migrating from Jaws to NVDA. This add-on also gives granular
control over the numlock key toggle, both when NVDA starts, and optionally
in profiles.</p>
<h3>Navigation modes explanation and features</h3>
<p>The normal functions of the PC number pad, with numlock off, are: page up,
page down, home, end, four-way arrow keys, and a delete key. But NVDA
completely takes over the numpad, to provide review keys, mouse controls,
and object navigation controls. This is true even in laptop keyboard mode,
which also duplicates those functions on non-numpad keys.</p>
<p>However some users do have a numpad on their laptop, and would prefer to use
it for Windows navigation purposes (at least some of the time), especially
because some laptops do not provide home, end, or other such keys. That is
where this add-on can help. Additionally, some desktop users, for example
those used to the way the numpad works in JAWS, may sometimes find it
convenient to use the numpad for those keyboard functions rather than the
normal NVDA keys, which this add-on enables. This includes the popular JAWS
command NumpadInsert+Numpad2, for read to end, which was a specific feature
request from some early users of this add-on.</p>
<h3>工作原理</h3>
<p>关闭数字键盘锁定后,无论您使用的是什么键盘布局,此插件都可以让您通过按 Alt+NVDA+小键盘加号(通常是最右侧的第二个长键),在普通 NVDA
导航模式和标准 Windows 编辑模式之间快速切换。您也可以为其在输入手势的键盘部分重新设置一个快捷键。</p>
<p>Note that this add-on doesn't disable the use of numpad insert as an NVDA
modifier, if you have it set as such. If you want that feature, please let
me know, although you can manually turn off numpad insert as a modifier in
NVDA keyboard settings. It also doesn't change the NVDA function of numpad
delete (key between zero and enter)--contact me if you desire this.</p>
<p>如果您希望 NVDA 启动时的小键盘模式始终为标准 Windows 编辑模式,您可以在NVDA设置中进行配置。转到NVDA
设置对话框,在类型列表找到Numpad Nav Mode(如要快速寻找,可依次按NVDA+N,P,S,然后按 N 数次,直到听到“Numpad Nav
Mode”),选中 Start NVDA with the numpad set to Windows nav mode 复选框即可。</p>
<h3>Numlock features</h3>
<p>By default, nothing is done with the numlock key.</p>
<p>However, if you share your computer with a sighted user who prefers that
numlock always be turned on, but you like having it off so that the numpad
works with NVDA, you may want the numlock to automatically turned off when
NVDA starts. Alternatively, you may enter a lot of data, and so prefer the
numlock to always be on when you start NVDA.</p>
<p> Go to NVDA menu, Preferences, Settings, Numpad Nav Mode, and use the "state of numlock when NVDA starts or profile loads" selector. This has three options. The first, "do not change", is the default, and won't touch the numlock. It will be in whatever state it was in before NVDA started.
The second option, is "turn numlock off", which will always turn the numlock off when NVDA starts. The third option, "Turn numlock on", will turn the numlock on if it was off when NVDA started.
If you choose either the second or third option, the numlock will be restored to whatever state it was in before, when you exit NVDA. For example, if you choose "Turn numlock off", and numlock was on when you started NVDA: it will be turned off while you use NVDA, but will be turned back on when you exit NVDA.</p>
<h4>Advanced use cases</h4>
<p>If you use NVDA's powerful configuration profiles, and you would like the
numlock to automatically turn on when you enter certain profiles, do the
following:</p>
<ul>
<li>While in the "normal profile", go to the Numpad Nav Mode settings panel
described above. Check the box for "Initial numlock state is configuration
profile dependent". This option is unchecked by default.</li>
<li>Select OK.</li>
<li>Change to the profile where you want numlock to be always turned off or
on.</li>
<li>Go back to the Numpad Nav Mode settings panel, and select the option to
Turn numlock off or on, as you prefer.</li>
<li>Then select OK. Now, whenever you enter this profile, the numlock will
automatically change to the desired state.</li>
</ul>
<p>Note that this is a new feature, and I don't know if anyone has use for this
feature. If you find one, please send an email or open <a href="https://github.com/opensourcesys/numpadNavMode/issues/new">an issue</a>, to let
me know how you have found to make use of it.</p>
<p>Or, better yet, leave a <a href="https://github.com/nvaccess/addon-datastore/discussions/2630">review</a> for the add-on, and comment on it there!
Reviews are very helpful, whether or not you use that feature.</p>
<h3>功能和建议</h3>
<p>I encourage you to post an <a href="https://github.com/opensourcesys/numpadNavMode/issues/new">issue</a>, or email with any feature
suggestions, or other use cases that I haven't listed here, or just to let
me know you find the add-on useful! But as mentioned above, if you do find
it useful, please leave a <a href="https://github.com/nvaccess/addon-datastore/discussions/2630">review</a>.</p>
<h3>History</h3>
<p>This add-on was the direct result of requests I've heard from users over the
years, and a GitHub discussion in
<a href="https://github.com/nvaccess/nvda/issues/9549">#9549</a>. With thanks to
@Qchristensen and @feerrenrut. The basic implementation of the numlock
features was borrowed from the legacy NumLock Manager add-on, by Noelia Ruiz
(@nvdaes on GitHub), and others. Used with permission.</p>
<h3>Changelog</h3>
<p>(This changelog is incomplete. See Git log for full details.)</p>
<ul>
<li>24.1.0: NVDA 2024.X compatibility.</li>
<li>23.1.0: Added numlock management features. Better logging. Improved config
profile handling (WIP).</li>
<li>23.0: NVDA 2023.X compatibility.</li>
</ul>
Zoom 无障碍增强http://addons.nvda-project.org/addons/zoomEnhancements.zh_CN.html2023-05-10T20:38:33Z2020-09-05T17:37:31Z
<ul>
<li>作者: Mohamad Suliman, Eilana Benish</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=zoomEnhancements">稳定版</a></li>
<li>NVDA兼容版本: 2018.4 到 2022.1</li>
</ul>
<p>此插件通过提供键盘快捷键来处理不同事件的通知,从而改善了为NVDA 用户使用 Zoom 的体验。</p>
<h2>用于控制会议中通知的键盘快捷方式</h2>
<ul>
<li><p>NVDA + Shift + A: :不同报告警报模式之间的循环切换。提供以下模式:</p>
<ul>
<li>朗读所有通知</li>
<li>声音提示通知</li>
<li>通知静音</li>
<li>自定义模式,用户可以自定义每种通知的模式。这可以使用插件的设置对话框或键盘快捷键完成</li>
</ul>
</li>
</ul>
<p>以下快捷方式可用于打开/关闭每种类型的警报的公告(请注意,当选择自定义模式时,这将有效):</p>
<ul>
<li>NVDA + Ctrl + 1:参与者已加入/离开会议(仅主机)</li>
<li>NVDA + Ctrl + 2: 参与者已加入/离开候机室(仅主机)</li>
<li>Nvda + Ctrl + 3: 主机静音音频</li>
<li>Nvda + Ctrl + 4: 视频被主机停止</li>
<li>NVDA + Ctrl + 5:参与者启动/停止屏幕共享</li>
<li>NVDA + Ctrl + 6:已授予/撤销录制权限</li>
<li>Nvda + Ctrl + 7: 收到公开会议内聊天</li>
<li>Nvda + Ctrl + 8: 收到私人会议内聊天</li>
<li>NVDA + Ctrl + 9: 会议内文件上传完成</li>
<li>NVDA + Ctrl + 0:授予/撤销主机特权</li>
<li>NVDA + 移位 + Ctrl + 1: 参与者已抬起/降低手(仅主机)</li>
<li>NVDA + 移位 + Ctrl + 2:授予/撤销远程控制权限</li>
<li>Nvda + Shift + Ctrl + 3: 我收到聊天消息</li>
</ul>
<p>选中朗读所有通知才能让自定义生效。</p>
<h2>打开插件设置对话框</h2>
<p>NVDA + Z 打开插件设置对话框!</p>
<p>使用此对话框,您可以 :</p>
<ul>
<li>查看朗读哪些通知,不读哪些通知</li>
<li>选择要朗读的通知类型</li>
<li>选择通知朗读模式</li>
<li>保存自定义更改</li>
</ul>
<h2>远程控制</h2>
<p>授予远程控制权限后,NVDA + O 将焦点移自远程控制屏幕/ 移出</p>
<p>请注意,焦点应放在会议控件之一上,以便能够远程控制另一个屏幕</p>
<h2>重要说明</h2>
<p>目前自定义通知模式的功能仅在用户界面语言设置为英语时才生效。</p>
强行停止 NVDAhttp://addons.nvda-project.org/addons/killNVDA.zh_CN.html2023-07-15T02:39:11Z2020-04-20T19:07:51Z
<ul>
<li>作者: Tyler Spivey</li>
<li>NVDA兼容版本: 2019.2 到 2019.3</li>
<li>下载<a href="https://www.nvaccess.org/addonStore/legacy?file=killnvda">稳定版</a></li>
</ul>
<p>此插件可暂时终止 NVDA,以便可以在 NVDA 无响应时恢复。</p>
<h2>用法</h2>
<ol>
<li>安装此插件。</li>
<li>使用常规设置中的“应用以保存的配置到欢迎界面和其他安全界面(需要管理员权限)”按钮将其复制到登录屏幕。</li>
<li>当 NVDA 无响应时,可按 Ctrl+Alt+delete,然后激活 NVDA 菜单,依次选择“工具”、“Kill NVDA”。</li>
</ol>
<p>然后,按 Esc 键。NVDA 将重新启动。此时您应该能够再次使用计算机。</p>
时区插件(英语http://addons.nvda-project.org/addons/timeZoner.zh_CN.html2023-06-19T15:45:56Z2020-04-06T00:05:35Z
<ul>
<li>作者: Munawar Bijani</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=timezone">稳定版</a></li>
<li>NVDA 兼容版本: 2019.2.1 或更高</li>
</ul>
<p>An add-on for NVDA to announce the time in selected timezones.</p>
<h2>Introduction</h2>
<p>For a very long time now, Windows has had the ability to show multiple
clocks from different timezones. Users can customize the clocks and they
become instantly visible.</p>
<p>Unfortunately, for users of screen readers such as
<a href="https://www.nvaccess.org/">NVDA</a> or
<a href="http://www.freedomscientific.com">JAWS</a>, there is no simple way to get this
information. These screen readers don't support additional clocks, so blind
computer users have to resort to other, third-party solutions, some of which
are paid.</p>
<p>A lot of the work I do involves working across timezones, and eventually I
got tired of manually converting times in my head, especially for timezones
that aren't aligned to the hour (such as India which is +5:30 UTC).</p>
<p>For these reasons, I've created this add-on for NVDA. The add-on lets you
hear times in selected timezones through the use of the timezone ring.</p>
<h2>Usage</h2>
<p>The add-on supports both the legacy and the Python 3 version of NVDA.</p>
<p>Once the add-on is installed, press NVDA+N to bring up NVDA's context
menu. Arrow down to "Preferences" and then up to "Time Zoner".</p>
<p>Press ENTER on "Configure timezone ring".</p>
<p>You will be presented with a dialog to set the timezones for which you want
the time and date announced.</p>
<p>Select items in the timezone list to add them to your timezone
ring. Deselect (or press the Remove button) to delete them from the ring.</p>
<p>You can also reorder the timezones in the ring by using the Move Up and Move
Down buttons.</p>
<p>Use the "Filter" box to search for specific timezones.</p>
<p>Check the "Announce abbreviated timezones" box to hear abbreviated timezone
names such as IST or GMT. Uncheck the box to hear the full timezone names
such as Asia/Kolkata or Europe/London.</p>
<p>When you are finished configuring the timezones, press the Save button.</p>
<p>From here on, you can press NVDA+Alt+T to announce times and dates in your
timezone ring.</p>
<p>When you first install the add-on, NVDA will default to your local timezone
if it can get it.</p>
<h2>Change Log</h2>
<h3>Version 1.03, released on 03/21/2020</h3>
<ul>
<li>The add-on no longer crashes if the default timezone can't be set.</li>
<li>Fixed an issue with relative links in the documentation.</li>
</ul>
<h3>Version 1.02, released on 03/18/2020</h3>
<ul>
<li>When installing a new version of this add-on, the settings from a previous
installation are no longer lost.</li>
<li>Other changes to conform to NVDA add-on standard compliance.</li>
</ul>
<h3>Version 1.01, released on 03/12/2020</h3>
<ul>
<li>The time and date are announced in the user's locale, meaning that 24-hour
time is honored if set.</li>
<li>NVDA will announce either the abbreviated or full timezone depending on
the user's setting in the Timezone Ring dialog. For example, it will
either say Europe/London, or it will say GMT or BST. This setting is
controlled by checking or unchecking the "Announce abbreviated timezones"
checkbox.</li>
<li>Add-on includes translator comments (@ruifontes).</li>
<li>Add-on now includes header comments (@ruifontes).</li>
<li>The Escape key closes the Timezone Ring dialog (@ruifontes).</li>
<li>The menu item to open the Timezone Ring dialog is now named appropriately
(@ruifontes).</li>
<li>NVDA now defaults to the local timezone on installation of this add-on, if
the local timezone is available.</li>
<li>Support for multiple timezones through the use of a timezone ring.</li>
<li>This add-on now uses the key NVDA+Alt+T to prevent conflict with the Clock
add-on.</li>
<li>The timezone selector dialog now has a filter box. NVDA will announce the
number of results as the user starts typing into the filter field.</li>
<li>Python 2 support</li>
<li>The date and time is now announced in a separate thread to prevent hanging
the NVDA thread in case retrieval takes a little while.</li>
<li>The timezone selector dialog now has a Cancel button and no longer
prevents NVDA from shutting down.</li>
</ul>
Tony 的增强插件(部分英语)http://addons.nvda-project.org/addons/tonysEnhancements.zh_CN.html2024-02-13T14:36:27Z2020-04-01T21:52:59Z
<ul>
<li>作者: Tony Malykh</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=tonysEnhancements">稳定版</a></li>
<li>NVDA compatibility: 2022.4 and 2023.1</li>
</ul>
<p>This add-on contains a number of small improvements to NVDA screenreader,
each of them too small to deserve a separate add-on.</p>
<h2>增强的表格导航命令</h2>
<ul>
<li>NVDA+Ctrl+数字,跳转到表格中相应数字的列数(0 为 10 列)。</li>
<li>NVDA+Alt+数字,跳转到表格中相应数字的行数(0 为 10 行)。</li>
</ul>
<h2>Removed table navigation commands</h2>
<p>The following table navigation commands have been Removed as they have been
integrated into the latest version of NVDA core.</p>
<ul>
<li>Jump to the first/last column in the table.</li>
<li>Jump to the first/last row in the table.</li>
<li>Read current column in the table starting from current cell down.</li>
<li>Read current row in the table starting from current cell.</li>
<li>Read current column in the table starting from the top.</li>
<li>Read current row in the table starting from the beginning of the row.</li>
</ul>
<p>Note: To learn about NVDA's default gestures for these features, please
refer to the NVDA user guide.</p>
<h2>Copying tables to clipboard</h2>
<p>With the following shortcuts you can copy either the whole table or current
row or current column in a formatted way, so that you can paste it as a
table to rich text editors, such as Microsoft Word or WordPad.</p>
<ul>
<li>NVDA+Alt+T - shows popup menu with options to copy table or part of it.</li>
</ul>
<p>There are also separate scripts for copying tables, rows, columns and cells,
but they don't have keyboard shortcuts assigned by default, custom keyboard
shortcuts cfor them can be assigned in InputGestures dialog of NVDA.</p>
<h2>Enhanced word navigation commands</h2>
<p>As of version 1.8 this functionality has been moved to <a href="https://github.com/mltony/nvda-word-nav/">WordNav
add-on</a>.</p>
<h2>Automatic language switching</h2>
<p>Allows to automatically switch the language of your synthesizer by character
set. Refgular expression for every language can be configured in the
preferences window for this add-on. Please make sure that your synthesizer
supports all the languages you're interested in. Switching between two
Latin-based languages or two languages whose character sets are similar is
not supported at this time.</p>
<h2>Quicksearch commands</h2>
<p>You can have up to three slots for configurable regular expressions that you
frequencly search for in editables. By default they are assigned to
<code>PrintScreen</code>, <code>ScrollLock</code> and <code>Pause</code> buttons. You can perform forward
search, or backward search by pressing <code>Shift</code> combined with these buttons.</p>
<h2>Suppress unwanted 'unselected' speech from NVDA</h2>
<p>Suppose you have some text selected in text editors. Then you press a key,
such as Home, or UpArrow, that is supposed to take you to another part of
the document. NVDA would announce 'unselected' and then speak the former
selection, which can be inconvenient at times. This feature prevents NVDA
from speaking formerly selected text in situations like this.</p>
<h2>Dynamic keystrokes</h2>
<p>You can assign certain keystrokes to be dynamic. After issuing such a
keystroke, NVDA will be checking currently focused window for any updates
and if the line is updated, NVDA will speak it automatically. For example,
certain keystrokes in text editors should be marked dynamic, such as Jump to
bookmark, jump to another line and debugging keystrokes,such as step
into/step over.</p>
<p>The format of dynamic keystrokes table is simple: every line contains a rule
in the following format:
<code>
appName keystroke
</code>
where <code>appName</code> is the name of the application where this keystroke is
marked dynamic (or <code>*</code> to b marked dynamic in all applications),
and<code>keystroke</code> is a keystroke in NVDA format, for example,
<code>control+alt+shift+pagedown</code>.</p>
<p>In order to figure out appName for your application, do this:</p>
<ol>
<li>Switch to your application.</li>
<li>Open NVDA Python Console by pressing NVDA+Shift+Z.</li>
<li>Type <code>focus.appModule.appName</code> and hit enter.</li>
<li>Press F6 to go to output pane and find appName value in the last line.</li>
</ol>
<h2>Showing and hiding windows</h2>
<p>You can hide current window, and you can show all currently hidden
windows. This might be useful if you use multiple windows in the same app
(say Chrome) and you would like to rearrange them.</p>
<ul>
<li>NVDA+Shift+-: hide current window.</li>
<li>NVDA+Shift+=: Show all currently closed windows.</li>
</ul>
<p>Please note, that if you quit NVDA while a window is hidden, there is
currently no way to show it after NVDA is restarted.</p>
<h2>Console enhancements</h2>
<p>Previously this add-on included a number of console-related features. As of
version 1.8, all console-related features have been moved to <a href="https://github.com/mltony/nvda-console-toolkit/">Console
Toolkit
add-on</a>. Specifically:</p>
<ul>
<li>控制台实时输出</li>
<li>Beep on console updates</li>
<li>Enforce Control+V in consoles</li>
</ul>
<h2>NVDA 忙碌时发出提示音</h2>
<p>选中此选项可使 NVDA 在忙碌时提供音频反馈。NVDA 忙碌并不一定表示其有问题,而是向用户发出一个信号,即不会立即处理任何 NVDA 命令。</p>
<h2>Volume adjustment</h2>
<ul>
<li>NVDA+Ctrl+PageUp/PageDown,调整 NVDA 音量。</li>
<li>NVDA+Alt+PageUp/PageDown - adjust volume of all applications except for
NVDA.</li>
</ul>
<h2>Sound split</h2>
<p>In Sound split mode NVDA will direct all sound output to the right channel,
while applications will play their sounds in the left channel. Channels can
be switched in settings.</p>
<ul>
<li>NVDA+Alt+S toggles sound split mode.</li>
</ul>
<p>Please note, that in certain situations sound output from an application
might be limited to one channel even when NVDA is not running. For example,
this could happen if NVDA has crashed while sound split was on, or when NVDA
exited cleanly while the app in question was not running. In those
situations, please restart NVDA, and turn off sound split while the app in
question is running.</p>
<h2>Enhanced mouse functions</h2>
<ul>
<li>Alt+NumPadDivide: Point mouse cursor at current object and click it.</li>
<li>Alt+NumPadMultiply: Point mouse cursor at current object and right mouse
button click on it.</li>
<li>Alt+NumPadPlus/NumPadMinus: Point mouse cursor at current object and
scroll down/up. THis is useful for infinite scroll webpages and webpages
that load more content on scroll.</li>
<li>Alt+NumPadDelete: Move mouse cursor out of the way to top left corner of
the screen. This can be useful to prevent unwanted hover over windows in
certain applications.</li>
</ul>
<h2>Detecting insert mode in text editors</h2>
<p>If this option is enabled, NVDA will beep when it detects insert mode in
text editors.</p>
<h2>阻止双击插入键的传递</h2>
<p>在 NVDA
中,连按两次插入键可激活该键的原有功能。但有时它会被意外触发。由于这是一种特殊的按键操作,因此无法在设置中禁用。此插件提供了阻止此键盘快捷键的方法。当双击插入键被阻止时,还可通过按
NVDA+F2,然后按插入键来实现该键原有功能。</p>
<p>此选项默认为禁用,必须在设置中启用。</p>
<h2>System priority of NVDA process</h2>
<p>This allows to boost system priority of NVDA process, that might improve
NVDA responsiveness, especially when CPU load is high.</p>
<h2>Fixing a bug when focus gets stuck in the taskbar when pressing Windows+Numbers</h2>
<p>There is a bug in Windows 10, and possibly in other versions. When switching
between applications using Windows+number shortcut sometimes the focus gets
stuck in the taskbar area instead of jumping to the window being switched
to. Since trying to report this bug to Microsoft is hopeless, a workaround
has been implemented in this add-on. The add-on detects this situation and
plays a short low-pitch beep when this situation is detected, then the
add-on fixes it automatically.</p>
符号音效(英语)http://addons.nvda-project.org/addons/phoneticPunctuation.zh_CN.html2023-08-22T14:48:40Z2020-04-01T21:52:58Z
<ul>
<li>作者: Tony Malykh</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=phoneticPunctuation">稳定版</a></li>
<li>NVDA 兼容性:2019.3</li>
</ul>
<p>Phonetic punctuation is an NVDA add-on that allows to convert punctuation
signs into audio icons. In general, it can also convert any regular
expressions into audio icons.</p>
<h2>Demo</h2>
<p>You can listen to a sample speech output with phonetic punctuation here (10
seconds audio):
https://soundcloud.com/user-977282820/nvda-phonetic-punctuation-demo</p>
<h2>Usage</h2>
<ol>
<li>Make sure that your symbol level is set to appropriate value. If you're
not sure, then press NVDA+P several times until you select "Symbol level
all".</li>
<li>Make sure phonetic punctuation is enabled. Press NVDA+Alt+P to enable.</li>
<li>Phonetic punctuation rules can be configured via a dialog box in NVDA
preferences menu.</li>
<li>Phonetic punctuation comes with a set of predefined audio rules. However,
only a few of them are enabled by default. You can enable other rules, as
well as add new rules in the configuration dialog.</li>
<li>Audio rules are saved in a file called <code>phoneticPunctuationRules.json</code> in
NVDA user configuration directory.</li>
</ol>
<h2>Supported voice synthesizers</h2>
<p>Phonetic punctuation depends on new NVDA speech framework, and as of today
(October 2019), not all voice synthesizers have proper support for the new
commands. This means that phonetic punctuation might not work correctly with
some voice synthesizers.</p>
<p>Synthesizers known to work well with Phonetic Punctuation:</p>
<ul>
<li>Microsoft Speech API</li>
<li>eSpeak</li>
<li>Windows OneCore Voices</li>
</ul>
<p>Synthesizers known to have problems with PhoneticPunctuation:</p>
<ul>
<li>IBMTTS: see <a href="https://github.com/davidacm/NVDA-IBMTTS-Driver/issues/22">this
issue</a>.</li>
<li>RHVoice: Break command is not supported.</li>
</ul>
<h2>Copyright notice</h2>
<p>Built-in audio icons were designed by T.V. Raman and are a part of
emacspeak. For more information, see: https://github.com/tvraman/emacspeak/
.</p>
百分比检查器(英语)http://addons.nvda-project.org/addons/percentageChecker.zh_CN.html2024-02-13T14:35:05Z2019-12-26T16:39:46Z
<ul>
<li>Authors: Original idea and code by Oriol Gómez, improvements and
maintenance by Łukasz Golonka</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=perChk">开发版</a></li>
<li>NVDA 兼容版本: 2019.2 到 2019.3</li>
</ul>
<p>This add-on allows you to check how far - in percents - you are in the text
or on a list. This information can be given either by spoken message, or by
a beep. In addition you can jump to the given percentage or a line number
in the text.</p>
<h2>Key Commands:</h2>
<ul>
<li>Shift+NVDA+j: Displays a dialog allowing you to jump to the given line
number.</li>
<li>Shift+NVDA+p: Announces percentage in the current text or on a list. In
addition if you are in a text the amount of words in the field would be
spoken. In case of a list this would be amount of all list items.</li>
<li>Alt+NVDA+p: Presents your position in a text or on a list as a beep.</li>
</ul>
<p>The two last commands can be pressed twice in quick succession to display a
dialog allowing you to jump to a given percentage in a text. All these
commands can be remapped from the input gestures dialog.</p>
读出密码(英语)http://addons.nvda-project.org/addons/reportPasswords.zh_CN.html2024-03-10T18:24:18Z2019-12-23T05:39:56Z
<ul>
<li>Authors: Noelia Ruiz Martínez</li>
</ul>
<p>This add-on adds the option of speaking the text typed in protected controls
like passwords, such as when logging into web-based email sites, where typed
characters are spoken as asterisks.</p>
<p>Note: NVDA has an option to configure if typed passwords will be spoken in
Windows terminals. This add-on won't affect those kinds of controls.</p>
<h2>How to configure</h2>
<p>The add-on can be configured from its category in the NVDA's settings
dialog, under NVDA's menu, Preferences submenu. A gesture for opening the
add-on settings panel can be assigned from Input gestures dialog,
configuration category.</p>
<p>Tip: If you have not configured NVDA to speak typed characters or words but
want to hear typed text in passwords, you may create a configuration profile
to enable the speaking of typed characters and passwords, and assign it to a
gesture or create a trigger to enable it automatically in certain
situations. For convenience, NVDA will ask if you want to create a dedicated
profile when the add-on is installed.</p>
<h2>Changes for 4.0</h2>
<ul>
<li>Compatible with NVDA 2023.1.</li>
</ul>
<h2>Changes for 3.0</h2>
<ul>
<li>Cannot be run in secure mode.</li>
<li>Compatible with NVDA 2022.1.</li>
</ul>
<h2>Changes for 2.0</h2>
<ul>
<li>Compatible with NVDA 2021.1.</li>
</ul>
<h2>Changes for 1.0</h2>
<ul>
<li>Initial version.</li>
</ul>
音效方案http://addons.nvda-project.org/addons/AudioThemes.zh_CN.html2024-02-13T14:38:59Z2019-12-14T22:49:55Z
<ul>
<li>作者: Musharraf Omer and others</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=ath">稳定版</a></li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=ath-dev">开发板</a></li>
</ul>
<p>此插件可以用声音的方式来提示NVDA所浏览的控件类型,并且可以以3D方式提示控件的所在位置。</p>
<p>支持设置音效的音量。可以自己制作打包音效方案,还可以激活,安装,删除,编辑,创建和分发音效方案包。</p>
<h2>用法</h2>
<p>此插件可让您执行三项不同的任务,包括管理已安装的音效方案,编辑当前活动的音频主题以及创建新的音效方案。</p>
<p>您可以通过NVDA菜单中的附加菜单访问这些功能。</p>
<h3>管理您的音效方案</h3>
<ul>
<li>除了安装和删除音效方案之外,“管理音效方案”对话框允许您激活或停用音效方案。</li>
<li>在此对话框中还有一些其他选项,包括: - 在3D模式下播放声音:当您取消选中此框时,无论对象位置如何,插件都将在单声道模式下播放声音(始终位于音频显示屏的中央)。 - 说出按钮,编辑框,链接等角色:当您取消选中此框时,NVDA将在聚焦对象时开始宣布角色,而不是忽略它(这是安装此插件时的默认行为)。 - 使用合成器音量:选中此框会将此加载项的声音播放器设置为使用活动的声音,从而在您更改该音量时使所有可听输出与音量相同。 - 音效方案音量滑块:或者,您可以使用此滑块设置加载项的音量。将其设置为0将静音所有声音,而100是最大音量。</li>
</ul>
<h3>编辑活动音效方案:</h3>
<ul>
<li>当你点击'编辑活动音效方案'选项时,会打开一个对话框,其中包含当前活动主题中包含的所有声音。从这个对话你可以:</li>
<li>更改所选内容:从列表中选择一个声音并单击此按钮,将打开一个标准的打开文件对话框,从文件系统中选择一个OGG或波形音频文件以替换选定的声音,然后单击确定以完成该过程。</li>
<li>移除所选内容:这将从主题中移除选定的声音,点击“是”确认移除过程,所选声音将被移除。</li>
<li>添加新声音:单击此按钮时,将显示新的对话框。从新打开的对话框中的第一个组合框中选择要为其分配声音的对象类型,例如(按钮,链接,标签,菜单等),然后单击“浏览至音频文件”按钮以选择要为之前选择的对象类型分配的声音。或者,您可以单击预览按钮预览声音,最后单击确定按钮将应用更改并将选定的声音指定给所选对象。 - 关闭:将不执行任何操作而退出对话框。</li>
</ul>
<h3>创建一个新的音效方案</h3>
<ul>
<li>如果你有良好的声音制作技巧,你可以在这里应用它们并创建自己的音效方案,而不是编辑现有的主题。要做到这一点,你可以按照如下步骤。 -
将音频文件收集到一个地方,它们必须采用ogg或波形格式,并将其重命名为对您有意义的内容。例如,当我为此加载项创建默认音效方案时,我会根据交互模式对声音进行分组,例如,组合框,下拉按钮和分割按钮都可以具有相同的声音,而Check框,切换按钮和菜单检查项目可以具有相同的声音。</li>
<li>从附加菜单中点击'创建一个新的音效方案' -
将打开一个对话框,询问您关于新音效方案的一些信息,包括:<em>%9主题名称:您的主题名称将显示在音频主题管理器。这必须是有效的Windows文件夹名称。
</em>%9您的姓名:输入您的真实姓名或昵称。 *%9主题描述:关于您的音效方案的简要说明。 - 点击确定移至下一步。 -
下一步将显示类似于“音效方案编辑器”的对话框,并且从它们的过程与主题编辑过程相同,因此请参阅“编辑有效音效方案”部分。</li>
</ul>
<h2>版权:</h2>
<p>Copyright(c)2014-2016 Musharraf Omer及其他贡献者</p>
<p>虽然这个插件是作为一个独立的项目出现的,但它演变成Austin Hicks和Bryan
Smart的'Unspoken'插件的增强版本。这个插件的大部分开发工作都是为了创建管理,编辑和创建音效方案包的工具。所以非常感谢他们创造这样一个美妙的插件,并使我们能够在他们的工作之上进行构建。</p>
<h2>关于第三方音频文件的注意事项:</h2>
<p>这个插件中的<strong> Default </strong>音效方案包使用来自多个来源的声音,下面是它们的细分: - 未声明的3D音频:NVDA的插件 -
TWBlue:免费和开源的twitter客户端 - Mushy话语提示:有更好声音的另一种对话。</p>
<h2>许可证</h2>
<p>此插件基于GNU通用公共许可证进行分发,想获取和查看许可。请参阅许可证文档**。</p>
语音合成设置选择器(英语)http://addons.nvda-project.org/addons/synthRingSettingsSelector.zh_CN.html2023-05-10T20:38:33Z2019-10-01T15:58:56Z
<ul>
<li>作者: David CM</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=synthrings">稳定版</a></li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=synthrings">开发版</a></li>
<li>NVDA 兼容版本: 2019.2</li>
</ul>
<p>This add-on allows the user to select which settings should appear on the synth settings ring.</p>
<h2>Features</h2>
<p>This add-on provides the following features:</p>
<ul>
<li>A category panel in the NVDA settings to select which settings you want to
include in the synth settings ring.</li>
<li>save specific settings for each profile.</li>
<li>overrides the default synth driver settings that are shown in the synth
settings ring.</li>
</ul>
<h2>Requirements</h2>
<p>You need NVDA 2019.2 or later.</p>
<h2>Installation</h2>
<p>Just install it as a NVDA add-on.</p>
<h2>Usage</h2>
<p>To enable or disable which settings are included, go to NVDA settings and
select "Synth ring settings selector" category. In that category you can
configure all supported features by this add-on. Settings included by
default:</p>
<ul>
<li>language.</li>
<li>voice.</li>
<li>variant.</li>
<li>rate.</li>
<li>rate boost.</li>
<li>volume.</li>
<li>pitch.</li>
<li>inflection.</li>
</ul>
<p>Note: This dialog shows the supported settings by the current synthesizer
only. Settings not present here aren't modified in the add-on config.</p>
调试助手http://addons.nvda-project.org/addons/debugHelper.zh_CN.html2024-02-13T14:34:57Z2019-08-30T15:30:10Z
<ul>
<li>作者: Luke Davis</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=debughelper">稳定版</a></li>
</ul>
<p>这个插件的目的是使 NVDA 中的调试变得更容易。将根据用户建议添加新功能。欢迎所有带有反馈或功能想法的电子邮件或 <a href="https://github.com/XLTechie/debugHelper">GitHub
问题</a>。</p>
<h2>快捷键</h2>
<ul>
<li>NVDA+Shift+F1:在 NVDA 日志中插入标记行。</li>
</ul>
<h2>解释和使用</h2>
<p>当您按下命令键时,插件会在 NVDA 信息级别的日志中插入如下一行:</p>
<pre><code>-- Mark 1 --
</code></pre>
<p>其还将读出:“Logged Mark 1”</p>
<p>如果再次按下该键,您将得到:</p>
<pre><code>-- Mark 2 --
</code></pre>
<p>并读出“Logged Mark 2”。</p>
<p>例如,假设您即将执行一系列任务,您知道会在 NVDA 日志中生成冗长的错误内容。您将把日志的相关部分发布到邮件列表或 <a href="https://github.com/nvaccess/nvda/issues">NVDA GitHub
问题跟踪器</a>。但是,您不想搜索整个日志来查找相关内容。所以使用这个插件在做导致第一个错误的事情之前插入标记
1。如果您知道其他内容会产生更多错误或不同类型的错误,则插入另一个标记以将该错误与前一个错误分开,或者您可以说“这是我在标记 3
处所做的,发生了一些错误”。另一个例子:在使用某些应用程序时,发生了一些导致错误的事情(也许您听到 Windows
错误声音)。您想稍后返回并找到该错误,但您不想立即停止工作并保存日志。所以你再次使用这个插件,在你的日志中插入一个标记。这次标记将出现在日志中的错误之后,而不是之前。但无论哪种方式,这些标记都会帮助您缩小日志重要部分的范围。</p>
<p>上面显示的标记行可以在记事本或 Notepad++
等文本编辑器中使用查找命令轻松搜索。此外,默认情况下,每个标记上方都会插入一个空行。标记后也可以有空行。如果您使用 NVDA
的日志查看器或其他文本编辑器,并且想要使用光标键快速向上、向下阅读日志以查找特定标记,则空行会很有帮助。当您快速浏览日志时,很容易从一堆正在说出的文本中挑选出“空白”一词。如果你的光标移动的真的很快,你可能需要不止一个空行,你可以在设置中调整。</p>
<p>注意:标记计数将在重新加载插件(NVDA+Control+F3)后继续存在,但如果您重新启动 NVDA,标记计数将从 1 开始。</p>
<h2>配置:</h2>
<p>在 NVDA 配置的设置部分,你会找到一个“Debug
Helper”类别。在设置对话框中,您可以更改在每条标记线之前和之后插入的空白行数。默认值是前一行,后 0 行,您可以使用 0 到 10 行。在
NVDA 按键与手势面板的工具类别下,您可以将 NVDA+Shift+F1 更改为您选择的快捷键。</p>
<h2>更新日志</h2>
<ul>
<li><p>版本 1.0.2 (2019-08-28)</p>
<ul>
<li>翻译和代码清理。</li>
</ul>
</li>
<li><p>版本 1.0.1 (2019-08-26)</p>
<ul>
<li>次要错误修复版本,可能修复某些 Windows 版本上的安装问题。</li>
</ul>
</li>
<li><p>版本 1.0 (2019-08-22)</p>
<ul>
<li><p>初始发布。包括以下功能:</p>
<ul>
<li>能够在信息级别的日志中生成编号的标记行。</li>
<li>能够在每个标记行之前和之后添加 0-10 个空白行。</li>
<li>通过 NVDA 设置对话框进行配置。</li>
</ul>
</li>
</ul>
</li>
</ul>
Notepad++ 增强插件http://addons.nvda-project.org/addons/notepadPlusPlus.zh_CN.html2023-05-10T20:38:33Z2019-08-11T13:52:23Z
<ul>
<li>作者: Derek Riemer, Tuukka Ojala</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=NotepadPlusPlus">稳定版</a></li>
</ul>
<p>此插件改进了notepad++文本编辑器的无障碍体验性。要了解更多信息,并在安装前阅读文档,请访问<a href="https://github.com/derekriemer/nvda-notepadplusplus">插件的 Github
页面</a></p>
NVDA插件和Python 3http://addons.nvda-project.org/addons/nvdapy3.zh_CN.html2024-02-13T14:36:19Z2019-07-26T13:16:19Z
<p>作为NVDA 2019.3的一部分,NVDA社区已从Python 2过渡到Python 3。本页旨在记录与 Python 3 版 NVDA
兼容的插件,并介绍其他插件和未来 NVDA 版本的兼容性问题。</p>
<h2>什么是过渡到Python 3 ?</h2>
<p>Python 2.x 于 2000 年发布,是最流行的编程语言之一。随着对 Unicode、Web 技术和数千个第三方库的支持,Python
成为许多项目的首选语言,包括 2006 年的 NVDA。</p>
<p>2000 年末,Python 开发人员宣布了 Python 3000计划,这是一个使 Python 现代化的项目。对 Python
语法、标准库和其他基础框架进行了更改,包括打印函数、对 Unicode 的更全面支持、对标准库的更改以及更改迭代方法(如 xrange 到范围)。尽管
Python 3.x 确实使 Python 编程语言现代化,但由于 Python 2 的大规模部署,Python 开发人员决定在 2020 年 1
月之前支持 Python 2.7(Python 2 的最后一个版本),以便让人们有时间迁移到 Python 3。</p>
<p>2019 年 NV Access 开始过渡到Python 3的工作,以便让NVDA项目持续发展,更受欢迎 。结果是 2019 年 7
月发布的threshold版本,开始使用Python 3.7,除了 Python 3
转换之外,还包括一系列更改,这些更改将影响很多插件。2020年2月10日发布的NVDA 2019.3由Python 3.7驱动。</p>
<h2>您需要了解的信息</h2>
<p>Python 3过渡会影响此网站上托管的许多插件。已知以下问题:</p>
<ul>
<li>插件不会加载,因为它们被 NVDA 标记为不兼容。</li>
<li>插件确实会加载,但可以看到语法错误和模块未找到错误等错误。</li>
<li>由于字节码不匹配,插件不会加载。</li>
<li>插件无法正常处理文本。</li>
<li>插件有效,但某些依赖于 Python 标准库的功能不起作用,例如网络。</li>
<li>某些语音合成器和盲文显示插件在文本输出时表现异常。</li>
</ul>
<p>遇到这些问题时,应联系相关插件的作者(有关本网站托管的插件的联系信息,请参阅下面的列表)。联系作者时,请务必提供详细信息。</p>
<p>下面是列出的插件的兼容性状态:</p>
<ul>
<li>兼容: 可以在未来的NVDA版本里使用</li>
<li>包含在NVDA中: 自2019.3起,插件功能现已成为NVDA的一部分</li>
<li>不兼容: (代码原因导致不兼容新版本 编辑manifest.ini也无法修复;包括具有兼容性清单isuses的插件)</li>
<li>待定: 情况不明</li>
<li>作者已有移植计划: 作者打算在未来的某个时间开始移植插件</li>
<li>正在进行中: 插件已通过alpha测试移植到Python 3,包涵正在进行中的测试</li>
</ul>
<h2>与 Python 3 和其他更改兼容的插件的状态</h2>
<p>下面是本网站上托管的插件列表,以及它们与 Python 3 版本的 NVDA 的兼容性状态以及已知问题(如果有)。该列表还包括插件作者的联系信息。</p>
<p>注意:插件兼容性状态更改不会实时通知,请经常查看这个页面。
一种解决兼容性问题的方法是编辑插件的manifest.ini文件 但是 需要插件代码本身没有问题
下面会详细说明。</p>
<h3>Access8Math数学插件</h3>
<ul>
<li>兼容</li>
<li>联系人:曾伍迪 <a href="mailto:tsengwoody.tw@gmail.com">tsengwoody.tw@gmail.com</a></li>
</ul>
<h3>插件更新器</h3>
<ul>
<li>兼容</li>
<li>联系人: Joseph Lee <a href="mailto:joseph.lee22590@gmail.com">joseph.lee22590@gmail.com</a></li>
</ul>
<h3>插件文档</h3>
<ul>
<li>兼容</li>
<li>Contact: Rui Fontes <a href="mailto:rui.fontes@tiflotecnia.com">rui.fontes@tiflotecnia.com</a>, Zougane, Rémy and Abdel</li>
</ul>
<h3>用于选定计数文本元素的插件</h3>
<ul>
<li>兼容</li>
<li>联系人: Rui Fontes <a href="mailto:rui.fontes@tiflotecnia.com">rui.fontes@tiflotecnia.com</a></li>
</ul>
<h3>音频主题</h3>
<ul>
<li>正在移植</li>
<li>联系人: Musharraf Omer <a href="mailto:ibnomer2011@hotmail.com">ibnomer2011@hotmail.com</a></li>
</ul>
<h3>音频图表</h3>
<ul>
<li>兼容</li>
<li>联系人:托尼·马莱赫 <a href="mailto:anton.malykh@gmail.com">anton.malykh@gmail.com</a></li>
</ul>
<h3>键盘提示音</h3>
<ul>
<li>兼容</li>
<li>联系人:
David CM <a href="mailto:dhf360@gmail.com">dhf360@gmail.com</a></li>
</ul>
<h3>Bit Che-bt支持插件</h3>
<ul>
<li>兼容</li>
<li>联系人:阿尔贝托·扎内拉 <a href="mailto:lapostadialberto@gmail.com">lapostadialberto@gmail.com</a>, 阿尔贝托·布福利诺
<a href="mailto:a.buffolino@gmail.com">a.buffolino@gmail.com</a>, 以即其他贡献者</li>
</ul>
<h3>NVDA蓝牙音频插件</h3>
<ul>
<li>兼容</li>
<li>联系人:托尼·马莱赫 <a href="mailto:anton.malykh@gmail.com">anton.malykh@gmail.com</a></li>
</ul>
<h3>BrailleExtender盲文支持插件</h3>
<ul>
<li>兼容</li>
<li>Contact: André-Abush Clause <a href="mailto:dev@andreabc.net">dev@andreabc.net</a></li>
</ul>
<h3>浏览器导航</h3>
<ul>
<li>兼容</li>
<li>联系人:托尼·马莱赫 <a href="mailto:anton.malykh@gmail.com">anton.malykh@gmail.com</a></li>
</ul>
<h3>Calibre图书支持插件</h3>
<ul>
<li>兼容</li>
<li>联系人:
Javi Dominguez <a href="mailto:fjavids@gmail.com">fjavids@gmail.com</a></li>
</ul>
<h3>字符信息</h3>
<ul>
<li>兼容</li>
<li>联系人:西里尔·布戈特 <a href="mailto:cyrille.bougot2@laposte.net">cyrille.bougot2@laposte.net</a></li>
</ul>
<h3>经典选择</h3>
<ul>
<li>兼容</li>
<li>联系人:泰勒·斯皮维 <a href="mailto:tspivey@pcdesk.net">tspivey@pcdesk.net</a></li>
</ul>
<h3>剪贴板内容编辑器</h3>
<ul>
<li>兼容</li>
<li>Contact: Noelia Ruiz Martínez <a href="mailto:nrm1977@gmail.com">nrm1977@gmail.com</a></li>
</ul>
<h3>剪贴板操作提示</h3>
<ul>
<li>兼容</li>
<li>Contact: Damien Sykes-Lindley <a href="mailto:damien@dcpendleton.plus.com">damien@dcpendleton.plus.com</a></li>
</ul>
<h3>NVDA 时钟日历插件</h3>
<ul>
<li>兼容</li>
<li>Contact: Hrvoje Katić <a href="mailto:hrvojekatic@gmail.com">hrvojekatic@gmail.com</a>, Abdel
<a href="mailto:abdelkrim.bensaid@gmail.com">abdelkrim.bensaid@gmail.com</a></li>
</ul>
<h3>Control Usage Assistant控件查看插件</h3>
<ul>
<li>兼容</li>
<li>联系人: Joseph Lee <a href="mailto:joseph.lee22590@gmail.com">joseph.lee22590@gmail.com</a></li>
</ul>
<h3>Crash Hero错误提示插件</h3>
<ul>
<li>不兼容</li>
<li>问题:Python 3 语法错误,没有兼容性信息</li>
<li>Contact: Derek Riemer <a href="mailto:driemer.riemer@gmail.com">driemer.riemer@gmail.com</a></li>
</ul>
<h3>某天星期几</h3>
<ul>
<li>兼容</li>
<li>Contact: Abdel <a href="mailto:abdelkrim.bensaid@gmail.com">abdelkrim.bensaid@gmail.com</a>, Noelia Ruiz Martínez
<a href="mailto:nrm1977@gmail.com">nrm1977@gmail.com</a></li>
</ul>
<h3>调试助手</h3>
<ul>
<li>兼容</li>
<li>Contact: Luke Davis <a href="mailto:newanswertech@gmail.com">newanswertech@gmail.com</a></li>
</ul>
<h3>开发者工具</h3>
<ul>
<li>正在移植</li>
<li>Contact: Andy Borka <a href="mailto:ajborka@gmail.com">ajborka@gmail.com</a></li>
</ul>
<h3>DropboxNVDA支持插件</h3>
<ul>
<li>兼容</li>
<li>Contact: Patrick Zajda <a href="mailto:patrick@zajda.fr">patrick@zajda.fr</a>, Filaos and other contributors</li>
</ul>
<h3>Dual Voice-NVDA多语音合成器支持插件</h3>
<ul>
<li>兼容</li>
<li>Contact: Seyed Mahmood Taghavi-Shahri</li>
</ul>
<h3>Easy Table Navigator-简单表格导航插件</h3>
<ul>
<li>兼容</li>
<li>联系人: Joseph Lee <a href="mailto:joseph.lee22590@gmail.com">joseph.lee22590@gmail.com</a></li>
</ul>
<h3>表情符号插件</h3>
<ul>
<li>兼容</li>
<li>Contact: Chris Leo <a href="mailto:llajta2012@gmail.com">llajta2012@gmail.com</a>, Noelia Ruiz Martínez
<a href="mailto:nrm1977@gmail.com">nrm1977@gmail.com</a>, Mesar Hameed <a href="mailto:mhameed@src.gnome.org">mhameed@src.gnome.org</a>, Francisco
Javier Estrada Martínez <a href="mailto:Fjestrad@hotmail.com">Fjestrad@hotmail.com</a></li>
</ul>
<h3>电驴</h3>
<ul>
<li>兼容</li>
<li>Contact: Noelia Ruiz Martínez <a href="mailto:nrm1977@gmail.com">nrm1977@gmail.com</a>, Chris
<a href="mailto:llajta2012@gmail.com">llajta2012@gmail.com</a>, Alberto <a href="mailto:a.buffolino@gmail.com">a.buffolino@gmail.com</a></li>
</ul>
<h3>Aria属性增强</h3>
<ul>
<li>兼容: 包含在NVDA中</li>
<li>Contact: José Manuel Delicado <a href="mailto:jm.delicado@nvda.es">jm.delicado@nvda.es</a></li>
</ul>
<h3>触摸手势增强</h3>
<ul>
<li>兼容</li>
<li>联系人: Joseph Lee <a href="mailto:joseph.lee22590@gmail.com">joseph.lee22590@gmail.com</a></li>
</ul>
<h3>winamp扩展</h3>
<ul>
<li>兼容</li>
<li>Contact: Hrvoje Katić <a href="mailto:hrvojekatic@gmail.com">hrvojekatic@gmail.com</a>, NVDA Add-ons Team</li>
</ul>
<h3>焦点突出显示</h3>
<ul>
<li>兼容: 包含在NVDA中</li>
<li>联系人: 西本卓也 <a href="mailto:nishimotz@gmail.com">nishimotz@gmail.com</a></li>
</ul>
<h3>金色光标</h3>
<ul>
<li>兼容</li>
<li>联系人:萨拉赫·阿泰尔<a href="mailto:atair1978@gmail.com">atair1978@gmail.com</a>、瓦菲克·塔希尔、约瑟夫·李<a href="mailto:joseph.lee22590@gmail.com">joseph.lee22590@gmail.com</a>、阿卜杜勒<a href="mailto:abdelkrim.bensaid@gmail.com">abdelkrim.bensaid@gmail.com</a></li>
</ul>
<h3>GoldWaveNVDA支持插件</h3>
<ul>
<li>兼容</li>
<li>Contact: Joseph Lee <a href="mailto:joseph.lee22590@gmail.com">joseph.lee22590@gmail.com</a>, David Parduhn
<a href="mailto:xkill85@gmx.net">xkill85@gmx.net</a>, Mesar Hameed <a href="mailto:mhameed@src.gnome.org">mhameed@src.gnome.org</a></li>
</ul>
<h3>图像描述</h3>
<ul>
<li>不兼容</li>
<li>问题: 尝试导入 Python 3 中不再存在的模块</li>
<li>Contact: Oliver Edholm <a href="mailto:oliver.edholm@gmail.com">oliver.edholm@gmail.com</a></li>
</ul>
<h3>缩进导航</h3>
<ul>
<li>兼容</li>
<li>联系人:托尼·马莱赫 <a href="mailto:anton.malykh@gmail.com">anton.malykh@gmail.com</a></li>
</ul>
<h3>输入锁</h3>
<ul>
<li>兼容</li>
<li>Contact: José Manuel Delicado <a href="mailto:jm.delicado@nvda.es">jm.delicado@nvda.es</a></li>
</ul>
<h3>用于 NVDA 的 Lambda 插件</h3>
<ul>
<li>兼容</li>
<li>联系人:阿尔贝托·扎内拉,伊万·诺维吉尔</li>
</ul>
<h3>Mozilla 应用程序增强</h3>
<ul>
<li>兼容</li>
<li>联系人:
Javi Dominguez <a href="mailto:fjavids@gmail.com">fjavids@gmail.com</a></li>
</ul>
<h3>mp3DirectCutNVDA支持插件</h3>
<ul>
<li>兼容</li>
<li>Contact: Abdel, Rémy Ruiz, Abdellah Zineddine, Jean-François Colas</li>
</ul>
<h3>NVDA俄语,乌克兰语合成器</h3>
<ul>
<li>不兼容</li>
<li>问题: 没有兼容性信息</li>
<li>Contact: Sergey Shishmintzev</li>
</ul>
<h3>去除蜂鸣声</h3>
<ul>
<li>兼容</li>
<li>Contact: Alberto Buffolino <a href="mailto:a.buffolino@gmail.com">a.buffolino@gmail.com</a></li>
</ul>
<h3>Notepad++</h3>
<ul>
<li>兼容</li>
<li>Contact: Derek Riemer <a href="mailto:driemer.riemer@gmail.com">driemer.riemer@gmail.com</a></li>
</ul>
<h3>NVDA 远程支持</h3>
<ul>
<li>兼容</li>
<li>Contact: Tyler Spivey <a href="mailto:tspivey@pcdesk.net">tspivey@pcdesk.net</a>, Christopher Toth
<a href="mailto:q@q-continuum.net">q@q-continuum.net</a></li>
</ul>
<h3>对象位置音</h3>
<ul>
<li>兼容</li>
<li>联系人: Joseph Lee <a href="mailto:joseph.lee22590@gmail.com">joseph.lee22590@gmail.com</a></li>
</ul>
<h3>简意导航</h3>
<ul>
<li>兼容</li>
<li>联系人: Joseph Lee <a href="mailto:joseph.lee22590@gmail.com">joseph.lee22590@gmail.com</a></li>
</ul>
<h3>光学字符识别</h3>
<ul>
<li>兼容</li>
<li>Contact: NV Access <a href="mailto:info@nvaccess.org">info@nvaccess.org</a></li>
</ul>
<h3>Outlook扩展</h3>
<ul>
<li>兼容</li>
<li>Contact: Cyrille Bougot <a href="mailto:cyrille.bougot2@laposte.net">cyrille.bougot2@laposte.net</a>, Ralf Kefferpuetz
<a href="mailto:ralf.kefferpuetz@elra-consulting.de">ralf.kefferpuetz@elra-consulting.de</a></li>
</ul>
<h3>位置标记</h3>
<ul>
<li>兼容</li>
<li>Contact: Noelia Ruiz Martínez <a href="mailto:nrm1977@gmail.com">nrm1977@gmail.com</a>, Chris
<a href="mailto:llajta2012@gmail.com">llajta2012@gmail.com</a></li>
</ul>
<h3>读取源</h3>
<ul>
<li>兼容</li>
<li>Contact: Noelia Ruiz Martínez <a href="mailto:nrm1977@gmail.com">nrm1977@gmail.com</a>, Mesar Hameed
<a href="mailto:mhameed@src.gnome.org">mhameed@src.gnome.org</a></li>
</ul>
<h3>读出符号</h3>
<ul>
<li>兼容</li>
<li>Contact: Noelia Ruiz Martínez <a href="mailto:nrm1977@gmail.com">nrm1977@gmail.com</a></li>
</ul>
<h3>资源监控器</h3>
<ul>
<li>兼容</li>
<li>Contact: Alex Hall <a href="mailto:mehgcap@gmail.com">mehgcap@gmail.com</a>, Joseph Lee
<a href="mailto:joseph.lee22590@gmail.com">joseph.lee22590@gmail.com</a>, beqa gozalishvili <a href="mailto:beqaprogger@gmail.com">beqaprogger@gmail.com</a>,
Tuukka Ojala <a href="mailto:tuukka.ojala@gmail.com">tuukka.ojala@gmail.com</a>, Ethin Probst
<a href="mailto:harlydavidsen@gmail.com">harlydavidsen@gmail.com</a> and other NVDA contributors</li>
</ul>
<h3>浏览光标</h3>
<ul>
<li>兼容</li>
<li>Contact: Tuukka Ojala <a href="mailto:tuukka.ojala@gmail.com">tuukka.ojala@gmail.com</a></li>
</ul>
<h3>读出当前键盘语言</h3>
<ul>
<li>兼容</li>
<li>Contact: Abdel <a href="mailto:abdelkrim.bensaid@gmail.com">abdelkrim.bensaid@gmail.com</a>, Noelia <a href="mailto:nrm1977@gmail.com">nrm1977@gmail.com</a></li>
</ul>
<h3>句子导航</h3>
<ul>
<li>兼容</li>
<li>联系人:托尼·马莱赫 <a href="mailto:anton.malykh@gmail.com">anton.malykh@gmail.com</a></li>
</ul>
<h3>读出密码</h3>
<ul>
<li>不兼容</li>
<li>联系人:泰勒·斯皮维 <a href="mailto:tspivey@pcdesk.net">tspivey@pcdesk.net</a></li>
</ul>
<h3>语音历史记录</h3>
<ul>
<li>兼容</li>
<li>Contact: Tyler Spivey, James Scholes</li>
</ul>
<h3>电台播放列表</h3>
<ul>
<li>兼容</li>
<li>Contact: Geoff Shang, Joseph Lee and other contributors</li>
</ul>
<h3>切换合成器</h3>
<ul>
<li>兼容</li>
<li>联系人:泰勒·斯皮维 <a href="mailto:tspivey@pcdesk.net">tspivey@pcdesk.net</a></li>
</ul>
<h3>系统列表</h3>
<ul>
<li>兼容</li>
<li>Contact: Rui Fontes <a href="mailto:rui.fontes@tiflotecnia.com">rui.fontes@tiflotecnia.com</a>, Rui Batista
<a href="mailto:ruiandrebatista@gmail.com">ruiandrebatista@gmail.com</a>, Joseph Lee <a href="mailto:joseph.lee22590@gmail.com">joseph.lee22590@gmail.com</a>, NVDA
Community Contributors</li>
</ul>
<h3>TeamTalk ClassicNVDA支持插件</h3>
<ul>
<li>不兼容</li>
<li>问题:由于语法错误而缺少模块,没有兼容性信息</li>
<li>Contact: Doug Lee with initial work by Tyler Spivey and others</li>
</ul>
<h3>文本信息</h3>
<ul>
<li>兼容</li>
<li>Contact: Carter Temm <a href="mailto:crtbraille@gmail.com">crtbraille@gmail.com</a></li>
</ul>
<h3>文本导航</h3>
<ul>
<li>兼容</li>
<li>联系人:托尼·马莱赫 <a href="mailto:anton.malykh@gmail.com">anton.malykh@gmail.com</a></li>
</ul>
<h3>每日提示</h3>
<ul>
<li>作者已有移植计划</li>
<li>Contact: Derek Riemer <a href="mailto:driemer.riemer@gmail.com">driemer.riemer@gmail.com</a></li>
</ul>
<h3>工具栏资源管理器</h3>
<ul>
<li>兼容</li>
<li>Contact: Alberto Buffolino <a href="mailto:a.buffolino@gmail.com">a.buffolino@gmail.com</a></li>
</ul>
<h3>Tone Master</h3>
<ul>
<li>不兼容</li>
<li>问题: 没有兼容性信息</li>
<li>Contact: Hrvoje Katić <a href="mailto:hrvojekatic@gmail.com">hrvojekatic@gmail.com</a></li>
</ul>
<h3>Unicode盲文输入</h3>
<ul>
<li>兼容</li>
<li>联系人:
Mesar Hameed <a href="mailto:mhameed@src.gnome.org">mhameed@src.gnome.org</a>, Patrick ZAJDA <a href="mailto:patrick@zajda.fr">patrick@zajda.fr</a>,
Leonard de Ruijter (Babbage B.V.) <a href="mailto:leonard@babbage.com">leonard@babbage.com</a></li>
</ul>
<h3>虚拟光标</h3>
<ul>
<li>兼容</li>
<li>联系人: Rui Batista <a href="mailto:ruiandrebatista@gmail.com">ruiandrebatista@gmail.com</a> 和 NVDA 插件团队</li>
</ul>
<h3>VLC 媒体播放器</h3>
<ul>
<li>兼容</li>
<li>联系人:
Javi Dominguez <a href="mailto:fjavids@gmail.com">fjavids@gmail.com</a></li>
</ul>
<h3>天气加</h3>
<ul>
<li>兼容</li>
<li>Contact: Adriano Barbieri <a href="mailto:adrianobarb@yahoo.it">adrianobarb@yahoo.it</a></li>
</ul>
<h3>Windows 10 应用增强</h3>
<ul>
<li>兼容</li>
<li>Contact: Joseph Lee <a href="mailto:joseph.lee22590@gmail.com">joseph.lee22590@gmail.com</a>, Derek Riemer
<a href="mailto:driemer.riemer@gmail.com">driemer.riemer@gmail.com</a> and others</li>
</ul>
键盘提示音http://addons.nvda-project.org/addons/beepKeyboard.zh_CN.html2023-05-10T20:38:33Z2019-05-20T16:57:49Z
<ul>
<li>作者: David CM</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=beepkeyboard">稳定版</a></li>
<li>下载<a href="https://www.nvaccess.org/addonStore/legacy?file=beepkeyboard">开发板</a></li>
<li>NVDA兼容版本: 2018.2至2019.2</li>
</ul>
<p>此插件可以让用户将NVDA配置为某些键盘事件,已让NVDA发出提示音。</p>
<h2>特性</h2>
<p>此插件提供了以下功能,可用于调整NVDA键盘的行为:</p>
<ul>
<li>大写锁定打开时大写字母的提示音:如果启用此功能,则键入大写字母和大写锁打开时 NVDA 将发出提示音。此功能可避免大小写不分的错误!</li>
<li>按下shift时输入字符的提示音:如果输入按下shift键的字符,则使用此功能 NVDA 将发出提示音。</li>
<li>切换键的提示音,起用后会发生变化:使用此功能,如果打开切换键,NVDA会发出更高的提示音,如果关闭则会降低声音。请注意,Windows在“轻松访问中心”中内置了切换键提示音功能。如果您不使用笔记本电脑键盘布局设置,则此本机功能会很好用。</li>
<li>读出切换键的更改:仅在“提示音更改”时打开。您可以启用或禁用NVDA来读出切换键状态。</li>
<li>指定字符的提示音:启用此功能后,NVDA将对在高级设置中设置的所有字符发出提示音。</li>
<li>禁用对密码字段的提示音:默认情况下启用此功能以防止出现安全风险。如果您想听到密码文本上的提示音,可以禁用它。</li>
</ul>
<h2>要求</h2>
<p>您需要NVDA 2018.2或更高版本。</p>
<h2>安装</h2>
<p>只需将其安装为NVDA插件即可。</p>
<h2>用法</h2>
<p>要启用或禁用功能,请转到NVDA设置,然后选择提示音键盘分类。在该类别中,您可以通过此插件配置所有受支持的功能。</p>
<ul>
<li>默认情况下,已启用“大写锁定时提示音”。</li>
</ul>
<p>如果需要更多设置,可打开包含以下选项的高级设置对话框:</p>
<ul>
<li>按下Shift键可忽略字符:按下Shift键时,此处的所有字符都会被忽略,并发出提示音。允许转义序列,例如“ \ t”代表制表符,“ \
r”代表回车符。</li>
<li>始终发出以下提示音:在此处,您可设置您要NVDA发出的提示音的所有字符。允许转义序列,例如“ \ t”代表制表符,“ \ r”代表回车符。</li>
<li>选择要配置的提示音:您可以在此配置所有音调的参数。在此处选择一个,然后在下面的文本框中设置参数。更改选择时,NVDA将使用对话框中设置的当前参数为当前选择的音调发出提示音。</li>
<li>提示音调:当前所选提示音调的音调。</li>
<li>音调长度:当前所选音调的音调长度。</li>
<li>提示音音量:当前所选音调的音量。</li>
<li>测试提示音:此按钮可让您使用当前设置的参数进行测试。</li>
<li>按确定按钮保存设置或取消按钮放弃设置。</li>
</ul>
开发者工具http://addons.nvda-project.org/addons/developerToolkit.zh_CN.html2024-02-13T14:34:55Z2019-05-20T02:40:40Z
<ul>
<li>作者: 安迪·博尔卡</li>
<li>下载<a href="https://www.nvaccess.org/addonStore/legacy?file=devtoolkit">稳定版</a></li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=devtoolkit-dev">开发板</a></li>
<li>NVDA compatibility: 2019.1 to 2020.1</li>
</ul>
<p>Developer toolkit (DTK) is an NVDA add-on that helps blind and visually
impaired developers independently create visually appealing user interfaces
and web content. It provides gestures that enable you to navigate through
objects and obtain information about them, such as their size, position, and
characteristics. To begin using DTK, place focus on a control, then press
<strong>ALT+WINDOWS+K</strong>. To disable it, press <strong>ALT+WINDOWS+K</strong> again. When on the
web, press <strong>NVDA+SPACE</strong> to put NVDA in Focus Mode and press
NVDA+SHIFT+SPACE to disable Single Letter Navigation.</p>
<h2>快捷键</h2>
<p>启用 DTK 时,可以使用以下手势。</p>
<ul>
<li><strong>ALT+WINDOWS+K</strong> - Enable or disable DTK features.</li>
<li><strong>LEFT ARROW</strong> - Move to previous sibling.</li>
<li><strong>RIGHT ARROW</strong> - Move to next sibling.</li>
<li><strong>UP ARROW</strong> - Move to parent.</li>
<li><strong>DOWN ARROW</strong> - Move to first child.</li>
<li><strong>CTRL+HOME</strong> - Move to top-most parent.</li>
<li><strong>HOME</strong> - Move to the relative parent if one is assigned.</li>
<li><strong>A</strong> - In web content, speak HTML attributes. Press twice quickly to copy
to the clipboard.</li>
<li><strong>B</strong> - Speak the position of the object's bottom edge. Press twice
quickly to copy to the clipboard.</li>
<li><strong>SHIFT+B</strong> - Speak the distance between the object's bottom edge and the
relative parent's bottom edge. Press twice quickly to copy to the
clipboard.</li>
<li><strong>C</strong> - Speak the number of children contained inside the object. Press
twice quickly to copy to the clipboard.</li>
<li><strong>control+c</strong> - Switch between RGB, Hex, and Name color values.</li>
<li><strong>CTRL+D</strong> - Enable or disable detailed messages.</li>
<li><strong>F</strong> - In web content, speaks the object's font and formatting
information. Press twice quickly to copy to the clipboard.</li>
<li><strong>H</strong> - Speak the object's height. Press twice quickly to copy to the
clipboard.</li>
<li><strong>L</strong> - Speak the position of the object's left edge. Press twice quickly
to copy to the clipboard.</li>
<li><strong>n</strong> - Speak the object's name. Press twice quickly to copy to the
clipboard.</li>
<li><strong>CTRL+P</strong> - Set the relative parent for obtaining size/location of
objects.</li>
<li><strong>P</strong> - Speak the relative parent's name. Press twice quickly to copy to
the clipboard.</li>
<li><strong>R</strong> - Speak the position of the object's right edge. Press twice quickly
to copy to the clipboard.</li>
<li><strong>SHIFT+R</strong> - Speak the distance between the object's right edge and the
relative parent's right edge. Press twice quickly to copy to the
clipboard.</li>
<li><strong>ALT+R</strong> - Speak the object's Role/control type. Press twice quickly to
copy it to the clipboard.</li>
<li><strong>S</strong> - Speak the number of siblings relative to the object. Press twice
quickly to copy to the clipboard.</li>
<li><strong>SHIFT+S</strong> - Speak the object's control states. Press twice quickly to
copy it to the clipboard.</li>
<li><strong>T</strong> - Speak the position of the object's top edge. Press twice quickly
to copy to the clipboard.</li>
<li><strong>V</strong> - Speak Developer toolkit version. Press twice quickly to copy to
the clipboard.</li>
<li><strong>W</strong> - Speak the object's width. Press twice quickly to copy to the
clipboard.</li>
</ul>
<h2>注意</h2>
<ul>
<li>When using home or any modified version of the home key, using the numpad
home key fails because NVDA will send the numpad7 keypress instead of a
numpadHome keypress. Other keyboard add-ons that attempt to reassign
numpad7 to the home key will fail in this add-on.</li>
<li><p>When using the relative parent feature, DTK will set the relative parent
to the desktop under the following conditions.</p>
<ul>
<li>The focused object and the relative parent are the same.</li>
<li>The relative parent is not a direct ancestor of the focused object.</li>
</ul>
</li>
<li><p>DTK cannot access information such as CSS rules, padding, borders, or
z-index. Doing so requires accessing them outside of the NVDA context,
which presents a security concern for users.</p></li>
</ul>
<h2>已知问题</h2>
<ul>
<li>The customizable list of font attributes found in Developer toolkit
settings may be cumbersome to use. This is a limitation found in NVDA's
user interface library.</li>
</ul>
<h2>版本历史记录</h2>
<h3>20.04</h3>
<ul>
<li>Added a gesture (home) that gives the ability to move to the defined
relative parent.</li>
</ul>
<h3>20.03</h3>
<ul>
<li>Added a gesture (ALT+R) that obtains the currently focused object's
control type. Examples include button, listitem, list, checkbox, and
section.</li>
<li>Added a gesture (SHIFT+S) that obtains the currently focused object's
control states. Examples include focused, focusable, selected, checked,
pressed, and readonly.</li>
<li>Removed support for IAccessible's unique ID because it is not reliable in
most contexts.</li>
<li>Abbreviated the version number to xx.yy where xx is the last two digits of
the current year, and yy is the update number for the current year. Thus
20.03 is the third major update in 2020.</li>
</ul>
<h3>2020.2</h3>
<ul>
<li>Starting DTK retains the cursor’s current position in web content. If the
object under the caret can’t gain focus, DTK will place focus on the first
available ancestor.</li>
<li>Removed legacy support for unicode strings.</li>
<li>Removed the enable/disable Developer toolkit features setting from
Developer toolkit settings dialog found in NVDA
menu>preferences>settings. Users can still enable/disable features by
pressing alt+windows+k.</li>
<li><p>The formatting attributes obtained by pressing 'f' when Developer toolkit
is enabled is now configurable in preferences>settings>Developer toolkit.</p>
<ul>
<li>Add new formatting attributes by pressing the 'new attribute'
button. Type in a name of a valid formatting attribute, press tab to put
it in the list, then press escape to leave edit mode.</li>
<li>Remove an attribute by selecting it in the list, then pressing the
'delete attribute' button.</li>
<li>Rename an attribute by pressing the 'Rename attribute' button, typing a
new name, pressing tab to put it in the list, then pressing escape to
leave edit mode.</li>
<li>Move an attribute up in the list by selecting it and pressing the 'Move
up' button. Repeat this until it reaches the desired location in the
list.</li>
<li>Move an attribute down in the list by selecting it and pressing the 'Move
down' button. Repeat this until it reaches the desired location in the
list.</li>
</ul>
</li>
<li><p>Users now have the ability to change the way color values are displayed
while obtaining formatting information. The setting is found in
preferences>settings>Developer toolkit, then choosing a color display
format. The color display format can also be changed by pressing control+c
while Developer toolkit features are enabled.</p>
<ul>
<li><strong>RGB</strong> - Red/Green/Blue value. Defines a color through a red, green,
blue color combination. Good for graphic art, especially non-web safe
colors.</li>
<li><strong>Hex</strong> - string starting with a '#' and followed by 6 characters
consisting of 1-0 and A-F. Usually good for web content.</li>
<li><strong>Name</strong> - The human readable value for the color. Good for general
purpose usage and verifying other color value formats.</li>
</ul>
</li>
</ul>
<h3>2020.1.1</h3>
<ul>
<li>Improved unicode support.</li>
</ul>
<h3>2020.1.0</h3>
<ul>
<li>Developers now have the ability to focus on smaller areas of their user
interfaces by pressing CTRL+p to set a relative parent. Use a relative
parent as a reference point when obtaining size and location
information. To use this feature, enable DTK features, navigate to the
object to use as a relative parent, then press CTRL+p. Then, return to
your work as usual.</li>
<li>Press the letter p while working in DTK to obtain the relative parent's
name. Press twice quickly to copy to the clipboard.</li>
<li>Use SHIFT+b to obtain the distance between the focused object's bottom
edge and the relative paren'ts bottom edge. DTK features must be enable to
use this feature.</li>
<li>Use SHIFT+r to obtain the distance between the focused object's right edge
and the relative paren'ts right edge. DTK features must be enable to use
this feature.</li>
<li>DTK now gracefully handles configuration profile switches.</li>
<li>Removed '-preview' from the version number to avoid version number
problems with add-on updater.</li>
</ul>
<h3>2020.0 preview</h3>
<ul>
<li>Changed version number to 2020.0 preview to reflect the impending switch
to Python 3.</li>
<li>Added Python 3 compatibility.</li>
<li>Added a new gesture, "n" that speaks the object's name. If one is not
assigned, speaks the word 'None' as the object's name.</li>
<li>DTK no longer adds duplicate settings panels in the NVDA settings window
when reloading add-ons.</li>
</ul>
<h3>2019.1.2</h3>
<ul>
<li>如果大小和位置值为 0,DTK 现在将报告大小和位置值。</li>
<li>导航现在遵循详细的消息设置。</li>
<li>朗读的大小/位置信息更加简洁。</li>
<li>稳定性提高。</li>
</ul>
<h3>2019.1.1</h3>
<ul>
<li>在朗读版本号时,DTK 将不再尝试多次加载自身。</li>
<li>安装时将禁用 DTK 功能。以前,DTK 功能在安装时已启用。这与在 NVDA 工具_管理加载项窗口中启用或禁用加载项不同。</li>
<li>现在,向用户显示的消息可以包含非 ascii 字符。</li>
<li>按下复制到剪贴板时的快捷键,如 a、b、c、f、h、l、r、s、t、v 和 w,不再打断NVDA 语音。</li>
</ul>
<h3>2019.1</h3>
<ul>
<li>修复了 DTK 尚未声明最小 NVDA 版本的兼容性问题。</li>
</ul>
<h3>2019.0 (初始稳定版本)</h3>
<ul>
<li>实现了基本的元素导航。</li>
</ul>
插件文档http://addons.nvda-project.org/addons/addonsHelp.zh_CN.html2024-02-13T14:38:34Z2019-05-10T03:54:05Z
<h2>信息</h2>
<ul>
<li>Authors: Rui Fontes, Ângelo Abrantes, Zougane, Remy, Abdel and
colaboration of James Scholes</li>
<li>更新于 21/03/2022</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=addonshelp">稳定版</a></li>
<li>NVDA 兼容性: 2017.2 及更高版本</li>
</ul>
<h2>介绍</h2>
<p>此插件提供了一种快速访问已安装的插件文档的方式。它在NVDA“帮助”菜单中创建了两个子菜单。其中一个称为“运行插件文档”,它为每个插件分组文档,并为所有正在运行的插件提供命令列表,并为每个插件提供一个表。其他名为“已禁用的插件文档”的子菜单列出了已禁用的插件,可以访问其文档。请记住,Synth和盲文驱动程序插件不会出现在上述任何类别中。请注意,您还可以通过NVDA的“工具”菜单中的“插件”管理器访问插件文档。在这里,您还可以获得有关插件状态的信息。另请记住,您可以在“输入手势”对话框中访问NVDA和插件命令。但是,在此对话框中,插件命令未分组,您无法找到包含“windows”的命令,例如...</p>
<h2>更新日志</h2>
<h3>版本22.03</h3>
<ul>
<li>兼容 NVDA 2022.1</li>
</ul>
<h3>版本21.05</h3>
<ul>
<li>兼容 NVDA 2021.1</li>
</ul>
<h3>版本2.1</h3>
<ul>
<li>兼容 NVDA 2019.3</li>
</ul>
<h3>版本2.0</h3>
<ul>
<li>现在,插件在NVDA“帮助”菜单中创建了两个菜单。</li>
<li>“运行插件文档”菜单中还有一个选项可显示“运行插件的命令列表”,其中包含表中每个插件的命令。</li>
<li>“已禁用的插件文档”菜单仅将已禁用的插件与文档文件分组。</li>
<li>注意,Synth和盲文驱动程序插件永远不会在上面的菜单中列出。</li>
<li>插件现在由其摘要表示,而不是由其名称表示。</li>
<li>改进代码。</li>
</ul>
<h3>版本1.2</h3>
<ul>
<li>修复小问题;</li>
<li>修复插件摘要中的导入子菜单名称;</li>
<li>如果可能,在新窗口中强制文档在默认浏览器中打开。</li>
</ul>
<h3>版本1.1</h3>
<ul>
<li>插件当前予python3兼容;</li>
<li>添加子菜单的新方法;</li>
<li>如果可能,将菜单名称更改为摘要插件,以使用界面语言显示菜单名称。</li>
</ul>
<h3>版本1.0</h3>
<ul>
<li>最初发布由Zougane,雷米和阿卜杜勒更新,以兼容NVDA 2019.1。</li>
</ul>
字符信息http://addons.nvda-project.org/addons/charInfo.zh_CN.html2024-02-15T10:17:43Z2019-04-25T19:09:30Z
<ul>
<li>作者: Cyrille Bougot</li>
<li>NVDA compatibility: 2022.3.3 and beyond</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=charInfo">稳定版</a></li>
</ul>
<p>This add-on allows to present in a message various information about a
character. It also allows to customize the information reported on a
character when using review cursor character navigation commands or multiple
presses of the review character command.</p>
<h3>Features</h3>
<ul>
<li>Display detailed information on a character, e.g. Unicode name, number,
CLDR, symbol name, etc.</li>
<li>This information can be displayed either at the location of the review
cursor or at the location of the system cursor.</li>
<li>Customize the reported information when pressing <code>numpad2</code>.</li>
<li>Use the same custom information when moving the review cursor by
character.</li>
</ul>
<h2>快捷键</h2>
<ul>
<li><code>Numpad2</code> (all keyboard layouts) or <code>NVDA+.</code> (laptop layout): when pressed
4 times, displays information about the character of the current navigator
object where the review cursor is situated. This command can also be
customized in the settings of the add-on.</li>
<li>Unassigned: Presents a message with detailed information on the character
where the review cursor is situated. If you feel uncomfortable with the
four press gesture, you may use this command instead.</li>
<li>Unassigned: Presents a message with detailed information on the character
at the position of the caret (works only in places where there is a
caret).</li>
<li>Unassigned: Opens Character Information add-on settings.</li>
</ul>
<p>The unassigned commands need first to be assigned in the Input gestures
dialog to be used.</p>
<h2>Detailed information on a character</h2>
<p>The presented information include the following sections:</p>
<ul>
<li>Unicode: information from Unicode norm, i.e. name, CLDR name, value,
block, etc.</li>
<li>MS font, only for characters written with proprietary Microsoft fonts
(Symbol, Wingding 1, 2, 3 and Webding): name and information about the
equivalent Unicode character.</li>
<li>NVDA symbol description: information allowing to understand how NVDA
reports the symbol description. NVDA uses the information in the top most
rows containing available information to provide the description of a
symbol.</li>
<li>NVDA character description: information allowing to understand how NVDA
reports the character description (e.g. "alpha" for "A"). NVDA uses the
information in the top most rows containing available information to
provide the description of a character.</li>
</ul>
<p>The provided information in the Unicode section is in English since it is
part of Unicode norm. If a local translation exists for this add-on, the
information is also provided alongside with English.</p>
<h2>Settings</h2>
<p>This add-on has its own category in NVDA's settings dialog where you can
configure the following options.</p>
<h3>Action for multiple presses of the report review character command</h3>
<p>The three combo boxes of this group allow to customize what is reported by
the report review character command (<code>numpad2</code>) when using two, three or
four presses. By default, NVDA reports the character description on second
press and its numeric value, decimal and hexadecimal, on third press. You
can change what is reported on the character at the position of the review
cursor upon multiple presses. For example, you can report its CLDR English
name on second press, its Unicode name on third press and display detailed
information on it on fourth press.</p>
<h3>Remember these action during character navigation</h3>
<p>When you have reported specific information with the report review character
command (<code>numpad2</code>) called multiple times, you may want to continue
reporting the same information while navigating with the review cursor
(<code>numpad1</code> and <code>numpad3</code>). Checking this option will allow you to do it, as
long as you navigate with the review cursor by character just after a
multiple press of <code>numpad2</code>.</p>
<h2>更新日志</h2>
<h3>Version 3.0</h3>
<ul>
<li>It is now possible to configure the property reported for the character
under the review cursor upon multiple presses on <code>numpad2</code>. Optionally,
after having used multiple press on <code>numpad2</code>, the last reported property
can also be reported as long as you navigate by character with the review
cursor (<code>numpad1</code> and <code>numpad3</code>).</li>
<li>Prepares compatibility with NVDA 2024.1: speech on-demand support.</li>
<li>Addresses potential security issues related to <a>GHSA-xg6w-23rw-39r8</a>
when using the add-on with older versions of NVDA. However, it is
recommended to use NVDA 2023.3.3 or higher.</li>
</ul>
<h3>Version 2.6</h3>
<ul>
<li>Update to Unicode 15.1.</li>
<li>Adds support for Python 3.11 to prepare compatibility with NVDA 2024.1.</li>
<li>Note: From now on, translation updates will not appear anymore in the
change log.</li>
</ul>
<h3>Version 2.5</h3>
<ul>
<li>Fixed import error with last NVDA alpha versions, NVDA 2023.2 development
cycle (contribution Noelia Ruiz Mart�nez).</li>
</ul>
<h3>Version 2.4</h3>
<ul>
<li>Updated localizations.</li>
</ul>
<h3>Version 2.3</h3>
<ul>
<li>Updated localizations.</li>
</ul>
<h3>Version 2.2</h3>
<ul>
<li>Removed the dev channel.</li>
<li>Updated localizations.</li>
</ul>
<h3>Version 2.1</h3>
<ul>
<li>Fixed some bugs preventing the character information report to be
displayed when some options were used.</li>
<li>Updated localizations.</li>
</ul>
<h3>Version 2.0</h3>
<ul>
<li>Enhanced the character information report with information on NVDA symbol
and NVDA character description.</li>
<li>Added the support of compound character, e.g. letters with diacritic
consisting in two or more Unicode characters.</li>
<li>Update to Unicode 15.0</li>
<li>Updated French block data.</li>
<li>Viewing character information is not allowed on lock screen and secure
screens.</li>
<li>On Windows lock screen, the script to review the current character can now
operate normally (single, double or triple press).</li>
<li>Compatibility with NVDA 2023.1.</li>
<li>Drops compatibility with NVDA below 2022.3.3. The last version compatible
with NVDA 2019.3 is the <a>1.8</a>.</li>
<li>更新本地化。</li>
</ul>
<h3>版本1.8</h3>
<ul>
<li>更新到 Unicode 14.0。</li>
<li>兼容 NVDA 2022.1。</li>
<li>Drops compatibility with NVDA below 2019.3. The last version compatible
with NVDA 2017.3 is the <a>1.7</a>.</li>
<li>现在通过 GitHub 操作而不是 appVeyor 来执行发布。</li>
<li>更新本地化。</li>
</ul>
<h3>版本1.7</h3>
<ul>
<li>添加了本地化。</li>
</ul>
<h3>版本1.6</h3>
<ul>
<li>兼容 NVDA 2021.1。</li>
</ul>
<h3>版本1.5</h3>
<ul>
<li>准备与 NVDA 2021.1兼容(贡献 lukasz golonka)。</li>
<li>随插件模板的上次修改一起更新。</li>
</ul>
<h3>版本1.4</h3>
<ul>
<li>添加了一个脚本来获取系统输入焦点处的字符信息(贡献 Lukasz Golonka)。</li>
<li>更新到 Unicode 13.0。</li>
</ul>
<h3>版本1.3</h3>
<ul>
<li>修复了 NVDA 2019.3 的一个 bug。</li>
</ul>
<h3>版本1.2</h3>
<ul>
<li>提供有关使用Microsoft字体编写的字符的附加信息。</li>
</ul>
<h3>版本1.1</h3>
<ul>
<li>更新以支持更新的版本的NVDA(兼容Python 2和3)</li>
<li>现在通过appveyor进行发布</li>
</ul>
<h3>版本1.0</h3>
<ul>
<li>发布初始版本.</li>
</ul>
<p>https://github.com/CyrilleB79/charInfo/releases/download/V1.7/charInfo-1.7.nvda-addon</p>
<p>https://github.com/CyrilleB79/charInfo/releases/download/V1.8/charInfo-1.8.nvda-addon</p>
<p>https://github.com/nvaccess/nvda/security/advisories/GHSA-xg6w-23rw-39r8#event-132994</p>
文本元素计数器http://addons.nvda-project.org/addons/wordCount.zh_CN.html2023-05-10T20:38:33Z2019-04-08T16:02:17Z
<p></p>
<ul>
<li>Authors: Rui Fontes <a href="mailto:rui.fontes@tiflotecnia.com">rui.fontes@tiflotecnia.com</a> and Angelo Abrantes
<a href="mailto:ampa4374@gmail.com">ampa4374@gmail.com</a></li>
<li>Updated in 21/03/2022</li>
<li>下载<a href="https://www.nvaccess.org/addonStore/legacy?file=wordCount">稳定版</a></li>
<li>Compatibility: NVDA version 2019.3 and beyond</li>
</ul>
<h2>用法</h2>
<p>This addon announces the number of words, characters, paragraphs and lines
of the selected text by pressing Control+Shift+F12. It also create a
ordered list of the words used and allow to display the lines containing a
word.</p>
<p>In any text editor, or in a virtual document, for example in a web browser,
PDF, email body, etc., select the desired text using the usual text
selection commands and press Control+Shift+f12.</p>
<p>To get a list of words used, just press Control+Shift+f11.</p>
<p>This commands can be modified in the "Input gestures" dialog in the "Text
editing" section.</p>
天气 + (英语)http://addons.nvda-project.org/addons/Weather_Plus.zh_CN.html2024-02-13T14:38:42Z2019-04-04T14:07:57Z
<ul>
<li>作者: Adriano Barbieri</li>
<li>NVDA 兼容版本: 2017.3 或更高</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=Weather_Plus">稳定版</a></li>
</ul>
<h1>ABOUT WEATHER PLUS:</h1>
<ul>
<li>This plugin adds local temperature and forecasts to 24 hours up to 2
additional days and hourlyforecast for NVDA.</li>
<li>Copyright (C) <a href="mailto:adrianobarb@yahoo.it">Adriano Barbieri</a></li>
<li>Released under the GNU GPL (General Public License) v2</li>
<li>Weather Plus works through the use and presence of the following services:</li>
<li><a href="https://www.weatherapi.com/">https://www.weatherapi.com/</a></li>
<li><a href="http://www.geonames.org/">http://www.geonames.org/</a></li>
<li><a href="http://veloroutes.org/elevation/">http://veloroutes.org/elevation/</a></li>
<li><a href="http://www.nvda.it/">http://www.nvda.it/</a></li>
</ul>
<h1>USAGE:</h1>
<ul>
<li>Press NVDA+w to get the information about current temperature and weather
conditions.</li>
<li>Press NVDA+shift+W to get 24 hours forecast and forecast up to 2 days.</li>
<li>Press NVDA+shift+W twice to get hourlyforecast of temperature and
atmospheric conditions.</li>
<li>Press NVDA+shift+control+w to set a temporary city.</li>
<li>Press NVDA+shift+control+alt+w to open the Weather Plus settings dialog.</li>
<li>Press NVDA+alt+w to get the date and time, when the weather report was
updated.</li>
<li>Press control+shift+w to toggle between Fahrenheit, Celsius or Kelvin
temperature scales.</li>
</ul>
<h1>Weather Plus setup:</h1>
<ul>
<li>You must set the Weather Plus addon before its first use! Go to the Preferences submenu, Weather Plus Settings submenu and choose one of the following options:</li>
<li>Set and Manage Your Cities... - Displays or allows to set the current city from a list.</li>
<li>Set a temporary city... - Displays and allows to set one temporary city from a list if available.</li>
<li>Documentation - Opens the help file for the current language.</li>
<li>Check for Update... - Notifies about the availability of the new version.</li>
</ul>
<p>To add a new city: press the following item:</p>
<ul>
<li>Set and Manage Your Cities... - Displays or allows to set the current city
from a list.</li>
<li>The following message is displayed only for the first time! Settings
Preset None F1: help placing, F2: last TAB selection, F3: list and edit
box, F4: control duration Weather Forecast, F5: volume controls.</li>
<li>In the edit box, enter a City or choose one from the list, if
available. Note: The F5 key is available if the sound effects are
activated.</li>
<li>After pressing enter on the item "Set and Manage Your Cities...", you will
find other buttons as follows:</li>
<li>Test - Test the validity of the city and find the data of it.</li>
<li>Add - Adds the current city into your list. This button can be activated
if you select a city from the list, when the city entered passed the test.</li>
<li>Details - Displays information about the current city. This button is
activated if you select a city from the list, or it has passed the test.</li>
<li>Define - Allows you to define the area, in order to adapt the sound
effects. This button can be activated if the audio effects are installed
and activated, and you select a city from the list.</li>
<li>Preset - Presets a city as the default, will be used every time you
restart the plugin. This button is activated if you select a city
previously inserted in the list and not preset, or it has passed the test.</li>
<li>Remove - Deletes the current city from your list. This button can be
activated if you select a city previously inserted in the list.</li>
<li>Rename - Rename the current city. This button can be activated if you
select a city previously inserted in the list.</li>
<li>Import new cities... - This button allows you to import cities from the
another list of cities with the extension *.zipcodes; you can select the
city you want to import, by turning on the checkbox associated with it.</li>
<li>Export your cities... - It allows you to save the cities in the specified
file with the extension *.zipcodes. This button is activated if you have
added and saved at least one city into the list.</li>
<li>hourly forecast setting... - This button allows you to choose the contents
of the hourly forecast report.</li>
<li>Scale of temperature measurement: Use the radio button to select between
Celsius (by default), Fahrenheit and Kelvin.</li>
<li>Degrees shown as: Use the radio button to select between: Celsius <code>-</code>
Fahrenheit <code>-</code> Kelvin (by default) C <code>-</code> F <code>-</code> K or Unspecified.</li>
<li>Combo box: Weather Forecasts up to days: 1; you can choose between 1 to 3
(1 days by default)</li>
<li>Combo box: API response language: English, en; you can choose the language
of the weather conditions text.</li>
<li>To perform the following actions, toggle the following checkboxes:</li>
<li>Copy the weather report and weather forecast, including city details to
clipboard; checkbox not checked (by default)</li>
<li>Enable audio effects (only for the current weather conditions); this
checkbox also allows you to manage the installation of sound effects; if
the sound effects are installed and the checkbox is activated, the F5 key
and the volume setting becomes available.</li>
<li>There will also be available an additional checkbox: "Use only weather
effects".</li>
<li>You can change the overall volume or change the last heard sound effect
and filter out the others sounds in your environment. Checkbox is not
checked by default.</li>
<li>Use only weather effects - This option is available if sound effects are
enabled; if is enabled, allows to listen only weather effects such as
rain, wind, thunder, etc., filtering out all environmental
ones. (unchecked by default)</li>
<li>Enable the reading of the hours in 24-hour format. - If this checkbox is
unchecked, announces the time in 12-hour format for example, 12 AM <code>-</code> 12
PM. Checkbox is checked (by default)</li>
<li>Enable help buttons in the settings window; checkbox checked (by default)</li>
<li>Read wind information; checkbox not checked (by default). If this checkbox
is enabled, you can also activate the following checkboxes:</li>
<li>Add wind direction; indicates the provenance of the wind. Checkbox checked
(by default)</li>
<li>Add speed of the wind; indicates the speed in kilometers or miles per
hour. Checkbox checked (by default)</li>
<li>Add speed in meters per second of the wind; checkbox checked (by default)</li>
<li>Add wind gust speed of the wind; checkbox checked (by default)</li>
<li>Add perceived temperature; checkbox checked (by default)</li>
<li>Read atmospherical information; checkbox not checked (by default). If
enabled, you can also check the following checkboxes:</li>
<li>Add humidity value; indicates the humidity in percent. Checkbox checked
(by default)</li>
<li>Add visibility value; indicate in kilometres or miles the distance
visible. Checkbox checked (by default)</li>
<li>Add atmospheric pressure value; indicates the atmospheric pressure in
millibars or inches of mercury. If it's checked, enable an additional
checkbox that allows you to indicate the pressure in millimeters of
mercury. Checkbox checked (by default)</li>
<li>Add status of barometric pressure; check box checked (by default)</li>
<li>Add cloudiness value; check box checked (by default)</li>
<li>Add precipitation value; check box checked (by default)</li>
<li>Add ultraviolet radiation value; check box checked (by default)</li>
<li>Read astronomical information; indicates the time of sunrise and sunset
and the time of moonrise and moonset. Checkbox not checked (by default)</li>
<li>Use the comma to separate decimals; if enabled, uses the comma as a
decimal separator, otherwise, use the point. Checkbox not checked (by
default)</li>
<li>Check for upgrade; if is activated this alerts when there is an update of
the addon. Checkbox checked (by default)</li>
<li>Press the OK button to confirm the action or the Cancel button to cancel
the action.</li>
<li>If you have modified the cities list, by pressing "Cancel", you will be
remembered and you can still save it. Note: your settings will be save in
the file named:</li>
<li>"Weather.ini": startup settings of Weather Plus.</li>
<li>"Weather.volumes": custom audio volume levels, regardless of the overall
volume.</li>
<li>"Weather.zipcodes": list of cities with their zip code and definitions.</li>
<li>"Weather.default": Your default city.</li>
<li>"Weather_searchkey": search key saved.</li>
</ul>
<hr />
在线图像描述和OCRhttp://addons.nvda-project.org/addons/onlineOCR.zh_CN.html2023-05-10T20:38:33Z2019-03-27T18:58:21Z
<ul>
<li>作者</li>
<li>NVDA兼容版本: 2018.3至2020.2</li>
<li>下载<a href="https://www.nvaccess.org/addonStore/legacy?file=oid-dev">开发版</a></li>
</ul>
<p>这个插件给NVDA添加了在线图像识别引擎 。</p>
<p>有两种引擎可用,OCR和图像描述。</p>
<p>OCR 从图像中提取文本。</p>
<p>图像描述器以文本形式描述图像中的视觉特征,如一般描述、颜色类型地标等。</p>
<p>使用此插件需要互联网连接,因为图像描述服务由网络 API 提供。</p>
<p>它们在此插件中称为引擎。</p>
<p>有三类引擎可用。</p>
<ul>
<li>在线 OCR</li>
<li>在线图像描述</li>
<li>Windows 10 OCR 引擎(脱机)</li>
</ul>
<p>您还需要选择识别图像的来源。</p>
<ul>
<li>当前导航对象</li>
<li>当前窗口</li>
<li>整个屏幕</li>
<li>来自剪贴板的图像数据或文件</li>
<li>来自剪贴板的图像文件路径名或图像 URL</li>
</ul>
<h3>键盘快捷键</h3>
<p>选择这些类型后,您可以使用一个快捷键开始识别。</p>
<p>NVDA + alt + P 识别当前导航对象然后读取结果。如果按两次, 打开虚拟结果文档。</p>
<p>还有四个未分配的手势。请在使用前分配它们。</p>
<p>循环浏览不同的识别引擎类型。</p>
<p>循环浏览不同的识别源类型。</p>
<p>取消当前识别</p>
<p>如果您认为等待的时间过长,并且想要取消,此手势可能很有用。</p>
<p>此外,有时您不想被识别消息打扰,因为您需要在识别启动后浏览其他东西。</p>
<p>Show previous result in a virtual result document.</p>
<p>Though there is a feature to copy result to clipboard. Character position
information cannot be preserved, so this gesture is added to solve this
problem.</p>
<p>There are also four old gestures are left unassigned for users who prefer gestures in previous versions.</p>
<p>It is recommended to use new gesture and switch engine type according to
your need.</p>
<p>Recognize current navigator object with online OCR engine Then read
result. If pressed twice, open a virtual result document.</p>
<p>Recognizes image in clipboard with online OCR engine. Then read result. If
pressed twice, open a virtual result document.</p>
<p>Recognize current navigator object Then read result. If pressed twice, open
a virtual result document.</p>
<p>Recognizes image in clipboard . Then read result. If pressed twice, open a
virtual result document.</p>
<h2>引擎设置</h2>
<p>您可以选择识别引擎, 并在 NVDA 设置对话框的 * 在线图像描述 * 类别中对其进行详细配置。</p>
<p>The author of addon have registered account with free API quota and set up a
proxy server on www.nvdacn.com to make this addon easier to test at
first. Test quota is limited and may be cancelled by API provider anytime.</p>
<p>It is highly recommended to register your own key according to guide in each
engine.</p>
<p>以下设置适用于所有引擎。</p>
<ul>
<li>Copy recognition result to the clipboard: if enabled, recognition result
text will be copied to clipboard after recognition.</li>
<li>Use browseable message for text result: if enabled, recognition result
text will be shown in a popup window instead of speech or braille message.</li>
<li>Swap the effect of repeated gesture with none repeated ones: by default, a
virtual result document is shown only if you press the corresponding
gesture twice, if you use that frequently you can enable this option so
that you only need to press once to get a result viewer.</li>
<li>Enable more verbose logging for debug purposes: some logs are essential
for debugging but affects performance and takes up a lot of space. Only
turn this on if specifically instructed to by the addon author or an NVDA
developer.</li>
<li>Proxy type: which type of proxy you are using. If you do not know what a
proxy is just leave it as is.</li>
<li>Proxy address: full URL of your proxy. If you do not know what a proxy is
just leave it as is. If you choose to use proxy your proxy will be
verified before saving , after verification, there will be a prompt to
tell you result.</li>
</ul>
<p>The following settings means the same in all engines, describe them here to
save space.</p>
<ul>
<li><p>API Access Type: this controls how you get access to the corresponding API
endpoints.</p>
<ul>
<li>If you choose "Use public quota", you are using free quota in an
account registered by addon author.</li>
<li>If you choose "Use your own API key", this addon will use quota from
your own account.</li>
</ul>
</li>
<li><p>APP ID, API key or API Secret Key: if you want to use quota from your own
account corresponding access tokens is required. Some engines only need
API key. Some engines require two tokens. These are only valid if you
choose "use your own API key" in API Access type.</p></li>
</ul>
<p>Note that the quality and accuracy of results are affected by many factors.</p>
<ul>
<li>引擎商使用的模型和技术</li>
<li>上传图像的质量</li>
<li>导航对象是否隐藏在其他东西后面</li>
<li>屏幕分辨率</li>
</ul>
<h2>在线图像描述</h2>
<p>这里有三个引擎可用。</p>
<h3>微软 Azure 图像分析</h3>
<p>此引擎根据图像内容提取一组丰富的视觉特征。</p>
<p>此引擎仅支持英语。如果需要其他语言的描述,可以使用 Microsoft Azure 图像描述器</p>
<p>视觉特征包括:</p>
<ul>
<li>成人-检测图像在本质上是否色情 (描绘裸体或性行为)。性暗示内容也被检测到。</li>
<li>品牌-检测图像中的各种品牌, 包括大致位置。品牌论点仅提供英文版本。</li>
<li>类别-根据文档中定义的分类对图像内容进行分类。</li>
<li>颜色-确定强调色、主导颜色以及图像是否为黑色和白色。</li>
<li>描述-描述图像内容与一个完整的句子在支持的语言。</li>
<li>人脸-检测图像上是否有人脸。如果存在, 则生成坐标、性别和年龄。</li>
<li>图像类型-检测图像是不是剪贴画,是不是简笔画。</li>
<li>对象-检测图像中的各种对象, 包括大致位置。"对象" 参数仅在英语中提供。</li>
<li>标签-标记图像与图像内容相关的单词的详细列表。</li>
</ul>
<p>某些功能还提供了其他详细信息:</p>
<ul>
<li>名人-识别名人。</li>
<li>地标-如果在图像中检测到地标, 则标识地标。</li>
</ul>
<h3>微软 Azure 图像描述</h3>
<p>此引擎生成一个图像的简单描述。这个描述是通过检测到的一系列标签合成的。可以为每个图像生成多个说明。描述是根据可能性排序的。 此引擎有两个设置。 *
语言服务将返回图像描述的语言。默认情况下为英语。</p>
<p>可以为每个图像生成多个描述。描述按其置信度分数排序。</p>
<p>此引擎有两个设置。</p>
<ul>
<li>语言: 用于识别的文本语言。默认情况下为英语。</li>
<li>最多返回多少个可能的描述 要返回的描述的最大数量。默认值为1。</li>
</ul>
<h2>在线 OCR</h2>
<p>Online engines rely on the use and presence of the following services.</p>
<p><a href="https://www.nvdacn.com">https://www.nvdacn.com</a></p>
<p><a href="https://ocr.space/ocrapi">https://ocr.space/ocrapi</a></p>
<p><a href="https://azure.microsoft.com/en-us/services/cognitive-services/">https://azure.microsoft.com/en-us/services/cognitive-services/</a></p>
<p><a href="http://ai.qq.com">http://ai.qq.com</a></p>
<p><a href="http://ai.baidu.com">http://ai.baidu.com</a></p>
<p><a href="http://ai.sogou.com/">http://ai.sogou.com/</a></p>
<p><a href="https://intl.cloud.tencent.com">https://intl.cloud.tencent.com</a></p>
<h2>引擎</h2>
<p>有五个引擎可用。</p>
<h3>腾讯云OCR</h3>
<p>此 API 由 <a href="https://intl.cloud.tencent.com">腾讯云</a>和
<a href="http://www.siaa.org.cn">无障碍研究会</a>赞助,每天的配额为 15000。</p>
<p>此引擎支持 19 种语言。</p>
<ul>
<li>中文和英文混合</li>
<li>日语</li>
<li>韩语</li>
<li>西班牙语</li>
<li>法语</li>
<li>德语</li>
<li>葡萄牙语</li>
<li>越南语</li>
<li>马来语</li>
<li>俄语</li>
<li>意大利语</li>
<li>荷兰语</li>
<li>瑞典语</li>
<li>芬兰语</li>
<li>丹麦语</li>
<li>挪威语</li>
<li>匈牙利语</li>
<li>泰语</li>
<li>拉丁语</li>
</ul>
<p>下面是此引擎的设置。</p>
<ul>
<li>语言: 用于识别的文本语言。默认情况下自动检测。</li>
</ul>
<h3>OCR空间</h3>
<p>这是一个付费 API,由 [OCR Space] (https://ocr. space)提供免费配额</p>
<p>它支持 24 种语言</p>
<ul>
<li>阿拉伯语</li>
<li>匈牙利语</li>
<li>简体中文</li>
<li>繁体中文</li>
<li>克罗地亚语</li>
<li>捷克语</li>
<li>丹麦语</li>
<li>荷兰语</li>
<li>英文</li>
<li>芬兰语</li>
<li>法语</li>
<li>德语</li>
<li>希腊语</li>
<li>匈牙利语</li>
<li>韩语</li>
<li>意大利语</li>
<li>日语</li>
<li>波兰语</li>
<li>葡萄牙语</li>
<li>俄语</li>
<li>斯洛文尼亚语</li>
<li>西班牙语</li>
<li>瑞典语</li>
<li>土耳其语</li>
</ul>
<p>以下是此引擎的设置:</p>
<ul>
<li>语言: 用于识别的文本语言。默认情况下为英语。</li>
<li>检测图像方向: 如果设置为 true, API 将正确自动调整图像。</li>
<li>缩放图像以获得更好的质量:如果设置为 true,API 将会自己放大图像。这可以显著改善 OCR 结果,尤其是低分辨率 PDF 扫描。</li>
<li>优化表格识别 如果选中, OCR 引擎将确保分析的文本结果始终逐行返回。如果要处理表格、收据 、发票和具有类似表结构的文档, 建议开启这个选项。</li>
</ul>
<p>如果要使用自己的密钥, 还需要指定 API 密钥。</p>
<p>您可以通过在 [OCR Space] (https://ocr. space)上注册获得自己的免费 API 密钥</p>
<p>这里有一个简单的指南。</p>
<p>查找链接"免费注册 API 密钥"</p>
<p>点击它,你会发现一个表格。</p>
<p>表单要求您输入以下数据</p>
<ul>
<li>电子邮件地址</li>
<li>名字</li>
<li>姓</li>
<li>您计划如何使用 OCR API?</li>
</ul>
<p>填写并提交后。您可能还需要通过验证码</p>
<p>然后您将收到一封确认电子邮件</p>
<p>在该电子邮件中查找名为"是的,请订阅我到此列表"的链接。访问该链接,您很快就会通过电子邮件收到 API 密钥。</p>
<h3>微软 azure ocr</h3>
<p>此引擎在 Microsoft Azure 认知服务计算机视觉中使用 OCR API。</p>
<p>它支持24种语言, 包括</p>
<ul>
<li>简体中文</li>
<li>繁体中文</li>
<li>捷克语</li>
<li>丹麦语</li>
<li>荷兰语</li>
<li>英文</li>
<li>芬兰语</li>
<li>法语</li>
<li>德语</li>
<li>希腊语</li>
<li>匈牙利语</li>
<li>意大利语</li>
<li>日语</li>
<li>韩语</li>
<li>挪威语</li>
<li>波兰语</li>
<li>葡萄牙语</li>
<li>俄语</li>
<li>西班牙语</li>
<li>瑞典语</li>
<li>土耳其语</li>
<li>阿拉伯语</li>
<li>罗马尼亚语</li>
<li>塞尔维亚西里尔文</li>
<li>塞尔维亚语</li>
<li>斯洛伐克语</li>
</ul>
<p>以下是此引擎的设置:</p>
<ul>
<li>语言: 用于识别的文本语言。默认情况下自动检测。</li>
<li>检测图像方向: 如果设置为 true, API 将正确自动调整图像。</li>
</ul>
<p>如果您使用自己的密钥, 则应从以下链接获取使用 Microsoft 计算机视觉 API 的订阅密钥:</p>
<p>第 1 步:在 <a href="https://azure.microsoft.com/en-ua/try/cognitive-services/">Azure
网站</a>
上创建一个帐户(https://azure.microsoft.com/en-ua/try/认知服务/)</p>
<p>请注意, 必须为计算机视觉 API 创建密钥。您在使用单个密钥导航时遇到的第一个 "GET API 密钥" 按钮。目前, Microsoft
提供了创建7天试用密钥的选项。你也可以注册一个免费的 azure 帐户更多的线索。注册需要信用卡。如果您已经拥有订阅帐户, 则可以跳过此步骤。</p>
<p>步骤 2: 部署认知服务</p>
<p>现在,您有一个 azure 帐户。</p>
<p>首次登录 [Azure 门户] (http://portal.azure.com)</p>
<p>等待, 直到您收到消息门户已准备就绪, 您将登录到 azure 门户。</p>
<p>在 "所有服务" 按钮后找到名为 "所有资源" 的链接, 并将其激活。</p>
<p>第2步: 部署认知服务现在你有了一个模糊的帐户。 首次登录 [Azure 门户] (http://portal.azure.com) 等待,
直到您收到消息门户已准备就绪, 您已登录到 azure 门户。 在 "所有服务" 按钮后找到名为 "所有资源" 的链接, 并将其激活。 等待,
直到你得到消息刀片所有资源都准备好了, 你的重点将是一个编辑框, 然后按 shift 选项卡找到一个名为添加并激活它的菜单项。</p>
<p>等待, 直到你得到消息搜索市场, 键入认知服务, 然后按向下箭头。 等待, 直到你得到消息列表的选项认知服务五个之一, 然后按回车键。 等待,
直到你得到消息刀片认知服务是准备按下选项卡或 b 找到一个按钮名为创建激活它。 等待, 直到您收到消息刀片创建准备好, 您的焦点将是一个编辑框,
键入此资源的名称。请注意, 您的资源名称只能包含字母数字字符 "<em>,-", 并且不能以 "</em>" 或 "-" 结尾。 我选择 NVDAOCR。
按选项卡转到 "订阅" 组合框。通常你可以让它原封不动。 按选项卡转到 "位置" 组合框。选择一个靠近您当前位置的位置。请务必记住这一点,
因为在引擎配置中需要位置。 按选项卡转到 "定价捆绑" 组合框。通常像 F0 这样的免费领带就足够了。如果这还不够,
您可以在查看完整定价详细信息链接中的 "查看完整定价详细信息" 中选择其他层。 按选项卡转到 "创建新资源组编辑框"。如果没有任何资源组,
则应创建一个资源组。按选项卡查找 "创建新按钮"。 然后按 "选项卡转到" 创建按钮 "以创建此资源。 等待, 直到您得到的消息部署成功。 然后找到
"转到资源" 按钮, 有时您需要上去激活 "通知" 按钮, 然后才能找到 "转到资源" 按钮。 等待, 直到您收到消息刀片快速启动是繁忙的。
找到名为键的链接, 然后将其激活。 等待, 直到您收到消息刀片管理密钥已准备就绪。 查找名为键1或键2的编辑框。该编辑框的内容是引擎配置中所需的 API
密钥。然后, 如果您使用自己的 API 密钥, 则可以填写所需的这两个设置。 Azure 资源区域: 在 Azure 门户中部署认知服务时选择的区域。
API 密钥: 建议使用 key 2 作为在 Azure 门户中成功部署认知服务后获得的密钥。</p>
<p>等待, 直到你得到消息搜索市场, 键入认知服务, 然后按向下箭头。 等待, 直到你得到消息列表的选项认知服务五个之一, 然后按回车键。 等待,
直到你得到消息刀片认知服务是准备按下选项卡或 b 找到一个按钮名为创建激活它。 等待, 直到您收到消息刀片创建准备好, 您的焦点将是一个编辑框,
键入此资源的名称。请注意, 您的资源名称只能包含字母数字字符 "<em>,-", 并且不能以 "</em>" 或 "-" 结尾。 我选择 NVDAOCR。
按选项卡转到 "订阅" 组合框。通常你可以让它原封不动。 按选项卡转到 "位置" 组合框。选择一个靠近您当前位置的位置。请务必记住这一点,
因为在引擎配置中需要位置。 按选项卡转到 "定价捆绑" 组合框。通常像 F0 这样的免费领带就足够了。如果这还不够,
您可以在查看完整定价详细信息链接中的 "查看完整定价详细信息" 中选择其他层。 按选项卡转到 "创建新资源组编辑框"。如果没有任何资源组,
则应创建一个资源组。按选项卡查找 "创建新按钮"。 然后按 "选项卡转到" 创建按钮 "以创建此资源。 等待, 直到您得到的消息部署成功。 然后找到
"转到资源" 按钮, 有时您需要上去激活 "通知" 按钮, 然后才能找到 "转到资源" 按钮。 等待, 直到您收到消息刀片快速启动是繁忙的。
找到名为键的链接, 然后将其激活。 等待, 直到您收到消息刀片管理密钥已准备就绪。 查找名为键1或键2的编辑框。该编辑框的内容是引擎配置中所需的 API
密钥。然后, 如果您使用自己的 API 密钥, 则可以填写所需的这两个设置。 Azure 资源区域: 在 Azure 门户中部署认知服务时选择的区域。
API 密钥: 建议使用 key 2 作为在 Azure 门户中成功部署认知服务后获得的密钥。</p>
<p>等待, 直到你得到消息搜索市场, 键入认知服务, 然后按向下箭头。 等待, 直到你得到消息列表的选项认知服务五个之一, 然后按回车键。 等待,
直到你得到消息刀片认知服务是准备按下选项卡或 b 找到一个按钮名为创建激活它。 等待, 直到您收到消息刀片创建准备好, 您的焦点将是一个编辑框,
键入此资源的名称。请注意, 您的资源名称只能包含字母数字字符 "<em>,-", 并且不能以 "</em>" 或 "-" 结尾。 我选择 NVDAOCR。
按选项卡转到 "订阅" 组合框。通常你可以让它原封不动。 按选项卡转到 "位置" 组合框。选择一个靠近您当前位置的位置。请务必记住这一点,
因为在引擎配置中需要位置。 按选项卡转到 "定价捆绑" 组合框。通常像 F0 这样的免费领带就足够了。如果这还不够,
您可以在查看完整定价详细信息链接中的 "查看完整定价详细信息" 中选择其他层。 按选项卡转到 "创建新资源组编辑框"。如果没有任何资源组,
则应创建一个资源组。按选项卡查找 "创建新按钮"。 然后按 "选项卡转到" 创建按钮 "以创建此资源。 等待, 直到您得到的消息部署成功。 然后找到
"转到资源" 按钮, 有时您需要上去激活 "通知" 按钮, 然后才能找到 "转到资源" 按钮。 等待, 直到您收到消息刀片快速启动是繁忙的。
找到名为键的链接, 然后将其激活。 等待, 直到您收到消息刀片管理密钥已准备就绪。 查找名为键1或键2的编辑框。该编辑框的内容是引擎配置中所需的 API
密钥。然后, 如果您使用自己的 API 密钥, 则可以填写所需的这两个设置。 Azure 资源区域: 在 Azure 门户中部署认知服务时选择的区域。
API 密钥: 建议使用 key 2 作为在 Azure 门户中成功部署认知服务后获得的密钥。</p>
<p>Wait until you get the message Blade Create is ready, your focus will be an
edit box, type a name for this resource. Note that Your resource name can
only include alphanumeric characters, '<em>', '-', and can't end with '</em>' or
'-'.</p>
<p>我选择NVDA_OCR。</p>
<p>Press tab to go to Subscription combo box. Usually you can leave it as is.</p>
<p>Press tab to go to Location combo box. Choose one close to your current location.</p>
<p>Be sure to remember this since location is required in engine configuration.</p>
<p>Press tab to go to Pricing tie combo box. Usually a free tie like F0 is
adequate. If that is not enough you can choose other tier after reading full
pricing details in View full pricing details link.</p>
<p>Press tab to go to Create new Resource group edit box. You should create one if you do not have any Resource group. Press tab find Create new button.</p>
<p>Then press tab go to Create Button to create this resource.</p>
<p>等待, 直到你得到消息搜索市场, 键入认知服务, 然后按向下箭头。 等待, 直到你得到消息列表的选项认知服务五个之一, 然后按回车键。 等待,
直到你得到消息刀片认知服务是准备按下选项卡或 b 找到一个按钮名为创建激活它。 等待, 直到您收到消息刀片创建准备好, 您的焦点将是一个编辑框,
键入此资源的名称。请注意, 您的资源名称只能包含字母数字字符 "<em>,-", 并且不能以 "</em>" 或 "-" 结尾。 我选择 NVDAOCR。
按选项卡转到 "订阅" 组合框。通常你可以让它原封不动。 按选项卡转到 "位置" 组合框。选择一个靠近您当前位置的位置。请务必记住这一点,
因为在引擎配置中需要位置。 按选项卡转到 "定价捆绑" 组合框。通常像 F0 这样的免费领带就足够了。如果这还不够,
您可以在查看完整定价详细信息链接中的 "查看完整定价详细信息" 中选择其他层。 按选项卡转到 "创建新资源组编辑框"。如果没有任何资源组,
则应创建一个资源组。按选项卡查找 "创建新按钮"。 然后按 "选项卡转到" 创建按钮 "以创建此资源。 等待, 直到您得到的消息部署成功。 然后找到
"转到资源" 按钮, 有时您需要上去激活 "通知" 按钮, 然后才能找到 "转到资源" 按钮。 等待, 直到您收到消息刀片快速启动是繁忙的。
找到名为键的链接, 然后将其激活。 等待, 直到您收到消息刀片管理密钥已准备就绪。 查找名为键1或键2的编辑框。该编辑框的内容是引擎配置中所需的 API
密钥。然后, 如果您使用自己的 API 密钥, 则可以填写所需的这两个设置。 Azure 资源区域: 在 Azure 门户中部署认知服务时选择的区域。
API 密钥: 建议使用 key 2 作为在 Azure 门户中成功部署认知服务后获得的密钥。</p>
<p>等待, 直到你得到消息搜索市场, 键入认知服务, 然后按向下箭头。 等待, 直到你得到消息列表的选项认知服务五个之一, 然后按回车键。 等待,
直到你得到消息刀片认知服务是准备按下选项卡或 b 找到一个按钮名为创建激活它。 等待, 直到您收到消息刀片创建准备好, 您的焦点将是一个编辑框,
键入此资源的名称。请注意, 您的资源名称只能包含字母数字字符 "<em>,-", 并且不能以 "</em>" 或 "-" 结尾。 我选择 NVDAOCR。
按选项卡转到 "订阅" 组合框。通常你可以让它原封不动。 按选项卡转到 "位置" 组合框。选择一个靠近您当前位置的位置。请务必记住这一点,
因为在引擎配置中需要位置。 按选项卡转到 "定价捆绑" 组合框。通常像 F0 这样的免费领带就足够了。如果这还不够,
您可以在查看完整定价详细信息链接中的 "查看完整定价详细信息" 中选择其他层。 按选项卡转到 "创建新资源组编辑框"。如果没有任何资源组,
则应创建一个资源组。按选项卡查找 "创建新按钮"。 然后按 "选项卡转到" 创建按钮 "以创建此资源。 等待, 直到您得到的消息部署成功。 然后找到
"转到资源" 按钮, 有时您需要上去激活 "通知" 按钮, 然后才能找到 "转到资源" 按钮。 等待, 直到您收到消息刀片快速启动是繁忙的。
找到名为键的链接, 然后将其激活。 等待, 直到您收到消息刀片管理密钥已准备就绪。 查找名为键1或键2的编辑框。该编辑框的内容是引擎配置中所需的 API
密钥。然后, 如果您使用自己的 API 密钥, 则可以填写所需的这两个设置。 Azure 资源区域: 在 Azure 门户中部署认知服务时选择的区域。
API 密钥: 建议使用 key 2 作为在 Azure 门户中成功部署认知服务后获得的密钥。</p>
<p>等待, 直到你得到消息搜索市场, 键入认知服务, 然后按向下箭头。 等待, 直到你得到消息列表的选项认知服务五个之一, 然后按回车键。 等待,
直到你得到消息刀片认知服务是准备按下选项卡或 b 找到一个按钮名为创建激活它。 等待, 直到您收到消息刀片创建准备好, 您的焦点将是一个编辑框,
键入此资源的名称。请注意, 您的资源名称只能包含字母数字字符 "<em>,-", 并且不能以 "</em>" 或 "-" 结尾。 我选择 NVDAOCR。
按选项卡转到 "订阅" 组合框。通常你可以让它原封不动。 按选项卡转到 "位置" 组合框。选择一个靠近您当前位置的位置。请务必记住这一点,
因为在引擎配置中需要位置。 按选项卡转到 "定价捆绑" 组合框。通常像 F0 这样的免费领带就足够了。如果这还不够,
您可以在查看完整定价详细信息链接中的 "查看完整定价详细信息" 中选择其他层。 按选项卡转到 "创建新资源组编辑框"。如果没有任何资源组,
则应创建一个资源组。按选项卡查找 "创建新按钮"。 然后按 "选项卡转到" 创建按钮 "以创建此资源。 等待, 直到您得到的消息部署成功。 然后找到
"转到资源" 按钮, 有时您需要上去激活 "通知" 按钮, 然后才能找到 "转到资源" 按钮。 等待, 直到您收到消息刀片快速启动是繁忙的。
找到名为键的链接, 然后将其激活。 等待, 直到您收到消息刀片管理密钥已准备就绪。 查找名为键1或键2的编辑框。该编辑框的内容是引擎配置中所需的 API
密钥。然后, 如果您使用自己的 API 密钥, 则可以填写所需的这两个设置。 Azure 资源区域: 在 Azure 门户中部署认知服务时选择的区域。
API 密钥: 建议使用 key 2 作为在 Azure 门户中成功部署认知服务后获得的密钥。</p>
<p>等待, 直到你得到消息搜索市场, 键入认知服务, 然后按向下箭头。 等待, 直到你得到消息列表的选项认知服务五个之一, 然后按回车键。 等待,
直到你得到消息刀片认知服务是准备按下选项卡或 b 找到一个按钮名为创建激活它。 等待, 直到您收到消息刀片创建准备好, 您的焦点将是一个编辑框,
键入此资源的名称。请注意, 您的资源名称只能包含字母数字字符 "<em>,-", 并且不能以 "</em>" 或 "-" 结尾。 我选择 NVDAOCR。
按选项卡转到 "订阅" 组合框。通常你可以让它原封不动。 按选项卡转到 "位置" 组合框。选择一个靠近您当前位置的位置。请务必记住这一点,
因为在引擎配置中需要位置。 按选项卡转到 "定价捆绑" 组合框。通常像 F0 这样的免费领带就足够了。如果这还不够,
您可以在查看完整定价详细信息链接中的 "查看完整定价详细信息" 中选择其他层。 按选项卡转到 "创建新资源组编辑框"。如果没有任何资源组,
则应创建一个资源组。按选项卡查找 "创建新按钮"。 然后按 "选项卡转到" 创建按钮 "以创建此资源。 等待, 直到您得到的消息部署成功。 然后找到
"转到资源" 按钮, 有时您需要上去激活 "通知" 按钮, 然后才能找到 "转到资源" 按钮。 等待, 直到您收到消息刀片快速启动是繁忙的。
找到名为键的链接, 然后将其激活。 等待, 直到您收到消息刀片管理密钥已准备就绪。 查找名为键1或键2的编辑框。该编辑框的内容是引擎配置中所需的 API
密钥。然后, 如果您使用自己的 API 密钥, 则可以填写所需的这两个设置。 Azure 资源区域: 在 Azure 门户中部署认知服务时选择的区域。
API 密钥: 建议使用 key 2 作为在 Azure 门户中成功部署认知服务后获得的密钥。</p>
<p>等待, 直到你得到消息搜索市场, 键入认知服务, 然后按向下箭头。 等待, 直到你得到消息列表的选项认知服务五个之一, 然后按回车键。 等待,
直到你得到消息刀片认知服务是准备按下选项卡或 b 找到一个按钮名为创建激活它。 等待, 直到您收到消息刀片创建准备好, 您的焦点将是一个编辑框,
键入此资源的名称。请注意, 您的资源名称只能包含字母数字字符 "<em>,-", 并且不能以 "</em>" 或 "-" 结尾。 我选择 NVDAOCR。
按选项卡转到 "订阅" 组合框。通常你可以让它原封不动。 按选项卡转到 "位置" 组合框。选择一个靠近您当前位置的位置。请务必记住这一点,
因为在引擎配置中需要位置。 按选项卡转到 "定价捆绑" 组合框。通常像 F0 这样的免费领带就足够了。如果这还不够,
您可以在查看完整定价详细信息链接中的 "查看完整定价详细信息" 中选择其他层。 按选项卡转到 "创建新资源组编辑框"。如果没有任何资源组,
则应创建一个资源组。按选项卡查找 "创建新按钮"。 然后按 "选项卡转到" 创建按钮 "以创建此资源。 等待, 直到您得到的消息部署成功。 然后找到
"转到资源" 按钮, 有时您需要上去激活 "通知" 按钮, 然后才能找到 "转到资源" 按钮。 等待, 直到您收到消息刀片快速启动是繁忙的。
找到名为键的链接, 然后将其激活。 等待, 直到您收到消息刀片管理密钥已准备就绪。 查找名为键1或键2的编辑框。该编辑框的内容是引擎配置中所需的 API
密钥。然后, 如果您使用自己的 API 密钥, 则可以填写所需的这两个设置。 Azure 资源区域: 在 Azure 门户中部署认知服务时选择的区域。
API 密钥: 建议使用 key 2 作为在 Azure 门户中成功部署认知服务后获得的密钥。</p>
<p>Find edit box named key 1 or key 2. The content of that edit box is the API
key required in engine configuration. Press Ctrl-C to copy it for engine
configuration</p>
<p>Then you can fill in these two settings required if you use your own API
key.</p>
<ul>
<li>Azure resource Region: the region you choose when deploying Cognitive
Services in Azure Portal.</li>
<li>API key: the key you get after successfully deploying Cognitive Services
in Azure Portal, KEY 2 is recommended.</li>
</ul>
<h3>百度OCR</h3>
<p>This one is also a paid API with free quota provided by Baidu.</p>
<p>Baidu OCR supports 10 languages including</p>
<ul>
<li>中文和英文混合</li>
<li>英文</li>
<li>葡萄牙语</li>
<li>法语</li>
<li>德语</li>
<li>意大利语</li>
<li>西班牙语</li>
<li>俄语</li>
<li>日语</li>
<li>韩语</li>
</ul>
<p>这个引擎还可以得到每个字符的位置</p>
<p>以下是它的设置:</p>
<ul>
<li><p>获取每个字符的位置允许您在某些无法访问的应用程序上执行更精确的操作。启用此功能将使识别速度稍慢。</p></li>
<li><p>Use Accurate API: if is enabled will use a different endpoint. That
accurate endpoint takes longer time but has higher quality and (If you use
your own API key its price is also higher).</p></li>
</ul>
<p>它有四个具有单独配额限制的终结点。</p>
<ul>
<li>Basic OCR without any information about text location. Currently 50000
times a day.</li>
<li>Basic OCR with information about text location. Currently 500 times a day.</li>
<li>Accurate OCR without any information about text location. Currently 500
times a day.</li>
<li>Accurate with information about text location. Currently 50 times a day.</li>
</ul>
<p>If you press the gesture which only read result, you are using endpoints without any information about text location.</p>
<p>If you press the gesture which shows an result viewer, you are using endpoints with information about text location.</p>
<p>虽然它提供了相当慷慨的免费配额, 但它的网站只有中文, 并不十分方便。</p>
<h3>腾讯优图</h3>
<p>此 API 使用免费但是有频率限制,大约为每秒钟两个查询。</p>
<p>如果要绕过限制,可以注册自己的 API 密钥。此 API 的网站仅有中文,无障碍不好。</p>
<p>文档中没有有关语言支持的信息。根据我的测试支持中英文和中英文混合物。</p>
<p>此 API 没有其他配置。</p>
<h2>更新日志</h2>
<h3>0.19</h3>
<ul>
<li>与 NVDA 2020.2 兼容</li>
<li>添加 由 <a href="https://intl.cloud.tencent.com">腾讯云</a>和
<a href="http://www.siaa.org.cn">无障碍研究会</a>赞助的腾讯云OCR引擎</li>
<li>删除不可用的引擎 奥利弗·埃德霍尔姆提供的人工智能引擎和搜狗OCR。</li>
<li>修复中文站上面的公共配额</li>
</ul>
<h3>0.18</h3>
<ul>
<li>与 python3 兼容</li>
<li>Introduce the concept of recognition source type and engine type to reduce
gesture usage.</li>
<li>Add a new unassigned gesture to cycle through different recognition source
types.</li>
<li>Add a new unassigned gesture to cycle through different recognition engine
types.</li>
<li>Add a new gesture to recognize according to image source and engine type
setting.</li>
<li>Add a new unassigned gesture to show previous result in a virtual result
document.</li>
</ul>
<h3>0.17</h3>
<ul>
<li><p>修复了以下问题:</p>
<ul>
<li>Jump directly to panel when switch to onlineImageDescriber in settings
dialog</li>
<li>Fix wrong description in azure analyzer</li>
</ul>
</li>
</ul>
<h3>0.16</h3>
<ul>
<li>添加取消识别的手势</li>
<li><p>修复了以下问题:</p>
<ul>
<li>无法朗读 "复选列表框" 状态更改</li>
<li>Swap the effect of repeated gesture not working in online image
describer</li>
</ul>
</li>
</ul>
<h3>0.15</h3>
<ul>
<li>Add an option to pop up a window containing message instead of speech or
braille message for text results</li>
<li>将 Microsoft Azure 图像分析器中的可视功能复选框更改为 "复选框列表"。</li>
<li><p>修复以下问题:</p>
<ul>
<li>Cannot load jpg image file from clipboard</li>
<li>识别后, 结果文档对象不会显示。</li>
<li>如果图像在内部调整大小, 则结果文档对象中的位置不可靠。</li>
<li>Microsoft Azure 图像描述器的结果位于同一行中, 因此很难在该行中导航。</li>
</ul>
</li>
</ul>
<h3>0.14</h3>
<ul>
<li><p>修正了一些错误:</p>
<ul>
<li>Cannot use your own API key in Microsoft Azure engines</li>
<li>如果有盲文显示, 则无法获取文本结果</li>
</ul>
</li>
</ul>
<h3>0.13</h3>
<ul>
<li>在不重新启动的情况下重新加载插件时, 确保加载项正常工作 (NVDA+Control+F3)</li>
</ul>
<h3>0.12</h3>
<ul>
<li>修正了 Microsoft Azure 图像描述器的浏览模式消息</li>
<li>用NVDA内置的方法描述强调色。</li>
<li>改进的 Microsoft Azure 图像分析仪的结果格式</li>
<li>根据审阅注释改进文档</li>
<li>修正手势不一致的问题。</li>
<li>Control+Shift+NVDA for clipboard while NVDA+ALT for navigator object</li>
<li>修复识别时丢失的 imageInfo 错误。</li>
</ul>
<h3>0.11</h3>
<ul>
<li>增加了图像描述功能</li>
<li>Change addon summary to online image describer</li>
</ul>
<h3>0.10</h3>
<ul>
<li>Fix error using user's own API key in sougou API.</li>
<li>Fix unknown panel issue by adding settings to supportedSettings</li>
</ul>
<h3>0.9</h3>
<ul>
<li>修复重复手势无效果问题。</li>
<li>修订文档, 以反映代码的更改。</li>
<li>Clarified what kind of clipboard image is supported and how to copy image
for recognition.</li>
<li>修复了剪贴板识别无法打开结果查看器问题的问题。</li>
<li>Added support to recognize copied local image file path in clipboard.</li>
</ul>
<h3>0.8</h3>
<ul>
<li>如果识别结果为空, 提示用户内容为空。</li>
<li>Fixed another place do not work well with non ascii config path</li>
</ul>
<h3>0.6</h3>
<ul>
<li>Added proxy settings for people with access of Internet behind a specific
proxy.</li>
<li>添加了几个常规选项。</li>
<li>修复由于将 Unicode URL 发送到 urllib3 而导致的 unicode 解码错误。</li>
</ul>
<h3>0.5</h3>
<ul>
<li>修复OCR 引擎直接上传图像文件, 而不是 base64 编码时发生的unicode 错误。</li>
<li>Change gesture of recognizing clipboard to Control+Shift+NVDA+R since
NVDA+Shift+R is used in Word and Excel to define row headers in tables, or
to delete the definitions when pressed twice.</li>
</ul>
<h3>0.4</h3>
<ul>
<li>修复配置路径包含非 ascii 字符时的安装错误</li>
<li>更改手势以避免与金色光标冲突。</li>
<li>将默认引擎更改为 Microsoft azure, 因为它可以自动检测文本语言。</li>
</ul>
<h3>0.3</h3>
<ul>
<li>添加有关如何获取 Microsoft Azure OCR 密钥的详细文档</li>
<li>修复了有关新安装的问题。</li>
<li>Removed auto OCR since this feature is problematic and may confuse with
online engines. Auto OCR will be a separate addon, when it is stable
enough.</li>
</ul>
浏览器导航http://addons.nvda-project.org/addons/browsernav.zh_CN.html2023-05-23T22:52:53Z2019-02-24T23:29:19Z
<ul>
<li>作者: Tony Malykh</li>
<li>NVDA compatibility: from 2019.3 to 2023.1</li>
<li>下载<a href="https://www.nvaccess.org/addonStore/legacy?file=browsernav">稳定版</a></li>
</ul>
<h1>NVDA 的浏览器导航插件</h1>
<p>This add-on provides NVDA users powerful navigation commands in browser
mode. It works in web browsers, as well as any other applications that
support NVDA browse mode, such as Word documents and email clients.</p>
<p>For example, with BrowserNav you can find vertically aligned paragraphs,
that is paragraphs with the same horizontal offset. This can be used to read
hierarchical trees of comments or malformed HTML tables.</p>
<p>You can also find paragraphs written in the same font size or style.</p>
<p>BrowserNav also provides new QuickNav commands: P for next paragraph and Y
for next tab.</p>
<h2>Download</h2>
<ul>
<li>Current stable version:
<a href="https://github.com/mltony/nvda-browser-nav/releases/latest/download/browsernav.nvda-addon">BrowserNav</a></li>
<li>Last Python 2 version (compatible with NVDA 2019.2 and prior): <a href="https://github.com/mltony/nvda-browser-nav/releases/download/v1.1/BrowserNav-1.1.nvda-addon">BrowserNav
v1.1</a></li>
</ul>
<h2>Usage in browsers and other programs that support browse mode</h2>
<p>可用于通过屏幕左边缘的水平偏移量、字体大小或字体样式进行导航。</p>
<ul>
<li>按水平偏移量导航时, 您可以轻松地找到页面上垂直对齐的段落。特别是, 您可以按 NVDA + Alt + 向下箭头或 UpArrow
跳转跳转到具有相同偏移量的下一段或上一段。例如, 这在浏览层次结构注释树 (例如在 reddit. com 上)
在第一级注释和跳过所有更高级别的注释之间时非常有用。</li>
<li>按字体大小导航时, 您可以轻松地找到以相同字体大小或更大字体大小编写的段落。</li>
<li>您还可以使用相同字体样式的约束按字体大小导航。</li>
</ul>
<p>BrowserNav rotor is used to switch between these options. Depending on the
setting of this rotor, BrowserNav will indicate with beeps either horizontal
offset or font size of currently selected item. In addition, BrowserNav will
crackle on QuickNav commands to indicate how much text has been skipped over
(this feature is only available in Google Chrome and Firefox).</p>
<p>BrowserNav works in any browser supported by NVDA. Although some features
may not be available in all browsers. BrowserNav also works in other
applications that support NVDA browse mode, such as Word documents and email
clients.</p>
<h2>快捷键:</h2>
<ul>
<li>NVDA + Alt + 向上箭头或向下箭头: 跳转到具有相同水平偏移量或字体大小的上一段或下一段。</li>
<li>NVDA+Alt+Home or NVDA+alt+LeftArrow: Jump to previous paragraph with
lesser offset or greater font size (parent paragraph).</li>
<li>NVDA+Alt+End or NVDA+Control+alt+LeftArrow: Jump to next paragraph with
lesser offset or greater font size (next parent paragraph).</li>
<li>NVDA+Alt+PageDown or NVDA+Alt+RightArrow: Jump to next paragraph with
greater offset or smaller font size (child paragraph).</li>
<li>NVDA+Alt+PageUp or NVDA+Control+Alt+RightArrow: Jump to previous paragraph
with greater offset or smaller font size (previous child paragraph).</li>
<li>NVDA + O: 切换转子设置之间的水平偏移量, 字体大小, 字体大小与字体样式。</li>
<li>Y 或 Shift + Y: 跳转到下一个或上一个选项卡。</li>
<li>P or Shift+P: Jump to next or previous dialog.</li>
<li>Z or Shift+Z: Jump to next or previous menu.</li>
<li>` orShift+` (backquote or tilde): Jump to next or previous format
change.</li>
<li>\ or Shift+\ (backslash): Scroll up or down to reveal each page element;
can be useful in dynamic web pages to load all the elements; also can be
useful in infinite scroll webpages to load the next chunk.</li>
<li>0 or Shift+0: Jump to next or previous tree view.</li>
<li>9 or Shift+9: Jump to next or previous tool bar.</li>
<li>NVDA+Shift+LeftArrow: Go back to previous location of cursor within
current document.</li>
<li>NVDA+E: edit semi-accessible edit boxes - see corresponding section below.</li>
<li>T or Shift+T: jump to next or previous table, but place the cursor in the
first cell. Sometimes NVDA puts the cursor just before the first cell and
BrowserNav fixes this behavior.</li>
</ul>
<h2>Bookmarks</h2>
<p>BrowserNav 2.0 introduces a new set of bookmark features .</p>
<h3>Bookmark keystrokes</h3>
<ul>
<li>NVDA+J: Show quickJump popup menu.</li>
<li>J or Shift+J: Jump to next or previous QuickJump bookmark.</li>
<li>/ and Control+/: Toggle SkipClutter mode for navigating by line (Up and
Down arrows) and by paragraph (Control+Up and Control+Down arrows)
correspondingly.</li>
<li>Alt+J: click all AutoClick bookmarks on current page.</li>
<li>Alt+1, Alt+2, ..., Alt+0: jump to next hierarchical bookmark of
corresponding level. 0 corresponds to level 10.</li>
<li>Shift+Alt+1, Shift+Alt+2, ..., Shift+Alt+0: jump to previous hierarchical
bookmark.</li>
<li>Alt+<code>or Shift+Alt+</code>: jump to next or previous hierarchical bookmark of
any level.</li>
</ul>
<h3>Sites</h3>
<p>The first thing you would need to configure is the site where you want to
create bookmarks. In most cases you would want to specify match type to be
either domain match or Match domain and its subdomains. To illustrate the
latter option, you can specify:</p>
<ul>
<li>URL: amazon.com</li>
<li>Match type: Match domain and its subdomains</li>
<li>This will match amazon.com, smile.amazon.com and all other *.amazon.com
domains.</li>
</ul>
<p>If you need finer control, you can also specify exact URL or define a
regular expression for URL.</p>
<p>Because of this flexible definition, on every given webpage multiple
QuickJump sites might be active at the same time.</p>
<h3>Bookmark types</h3>
<p>Once you have configured site definition, you can proceed to define some
bookmarks on it.</p>
<p>BrowserNav currently supports four types of bookmarks:</p>
<ul>
<li>QuickJump bookmarks: you can jump to them by pressing J or Shift+J.</li>
<li>SkipClutter bookmarks: These bookmarks are skipped automatically when
navigating by line (Up/Down arrow) or by paragraph (Control+Up/Down
arrows). This allows to hide clutter on webpages, such as empty lines,
timestamps and any other redundant information. The information is not
removed completely, SkipClutter can be temporarily disabled via / or
Control+/ commands. By default SkipClutter skips empty paragraphs on all
websites.</li>
<li>AutoClick bookmarks: you can mark clickable elements, such as links,
buttons or checkboxes to be autoClick bookmarks. Then by pressing Alt+J
you can quickly press all autoClick bookmarks on current page with a
single keystroke without moving the cursor. This can come in handy to
press a frequently used button on a website, such as play button on
YouTube or Mute button on video-conferencing websites.</li>
<li>Hierarchical bookmarks: this is similar to quickJump bookmarks, but this
takes into account horizontal offset of a bookmark. Sites like Reddit and
Hacker News have a hierarchical tree of comments, that was pretty
challenging to efficiently navigate for screenreader users. On these
websites you can mark comments as a hierarchical bookmark and then you can
navigate between them By pressing Alt+digit or Shift+Alt+ditgit, where
digit stands for number row 1,2,3,...0 - that is the level of the
comment. By default BrowserNav has hierarchical bookmarks configured for
Hacker News and old.reddit.com; it was however too difficult to configure
them for modern reddit.com website since there doesn't appear to be easily
searcheable paragraph that would identify comments.</li>
</ul>
<h3>Creating a new bookmark</h3>
<p>Once you have configured a site, the easiest way to create a new bookmark would be to navigate to the desired paragraph in the document , press NVDA+J to show bookmarks context menu and select Bookmarks > Create new bookmark for site ...</p>
<p>Bookmark configuration dialog will open. You can now customize bookmark. You
can change how text is matched (e.g. string match or regular expression).</p>
<p>Other options in this dialog:</p>
<ul>
<li>Category: defines bookmark type.</li>
<li>Display name: optional name of this bookmark for better readability. This
just gives a better name so that you can identify this bookmark in a long
list of bookmarks.</li>
<li>Spoken message when bookmark is found: optional message to speak every
time you hit this bookmark in the document.</li>
<li>Offset in paragraphs: after finding matched text BrowserNav will then
shift cursor by this many paragraphs forward or back. This can be useful
for example if target text that you want to jump to doesn't contain any
common text that can be matched (e.g. forum post), but a preceding
paragraph contains a matchable word (e.g. upvote). In this case you can
match the word upvote and specify offset=1, to place the cursor on the
first paragraph of the post instead of the word upvote.</li>
<li>Attributes: space-separated list of paragraph attributes that are matched
against. The list of available attributes for current paragraph is
available in the next form field. List of attributes is prepopulated with
some common roles and typically you don't need to edit it.</li>
<li>Available attributes in current paragraph : these are all the attributes
found in current paragraph. You can select and press Space to add them to
the list of matched attributes.</li>
</ul>
<h3>Advanced site options</h3>
<p>In site configuration dialog you can specify a number of advanced options:</p>
<ul>
<li>Display name: optional display name for better readability in the list of
sites.</li>
<li>Focus mode: this allows to override default handling of focus events in
NVDA. Certain websites misuse focus events. In order to use them more
conveniently, you can either ignore focus events, or alternatively disable
automatic entering of focus mode when a focus event is received.</li>
<li>Live region mode: Some website misuse live regions. This option allows to
disable live region announcements for current website only.</li>
<li>Debug beep mode: this is mostly good for debugging purposes. You can make
NVDA beep when certain event (focus, live region update or successful
autoClick) happened.</li>
<li>AutoClick options: when you set up QuickClick bookmark, this allows you to
configure this bookmark to be pressed automatically after a certain delay
once the website is fully loaded. Another option allows BrowserNav to keep
monitoring the website and whenever any more of such QuickClick bookmarks
appear, it would click them automatically still. Please note that this
feature is experimental.</li>
</ul>
<h3>Configuration</h3>
<p>Bookmark definitions are stored in NVDA configuration directory in file
<code>browserNavRules.json</code>. You can edit this file manually or share it with
someone.</p>
<p>NVDA Configuration directory can be found by opening Start menu and typing:
Explore NVDA user configuration directory.</p>
<p>BrowserNav comes with default configuration file with sample bookmarks.</p>
<h2>Editing semi-accessible edit boxes</h2>
<p>Many modern web applications, notably Jupyter among others, use edit boxes,
that are not that accessible, e.g. they appear blank, but you can copy text
in and out of them using Control+A, Control+C and Control+V keystrokes.</p>
<p>BrowserNav offers an experimental feature to edit those edit boxes in a more
convenient way. IN order to use it:</p>
<ol>
<li>Find edit box in the browser window.</li>
<li>Press NVDA+E.</li>
<li>A new window will appear with the contents of that edit box.</li>
<li>Edit the contents of that edit box in this window.</li>
<li>Once you're done, you can press Escape to close the accessible edit
window and update the edit box on the web page.</li>
<li>Alternatively, you can press Control+Enter, Shift+Enter or
Alt+Enter. This will close the edit window, update the edit box and pass
on the gesture on to the web application.</li>
<li>In order to close the edit window without saving changes, press Alt+F4.</li>
<li>At any time, if the contents of previously edited text is lost, press
NVDA+Control+E to copy it to clipboard.</li>
</ol>
<p>Notes:</p>
<ul>
<li>Do not change the state of the browser, e.g. do not switch tabs and do not
focus other elements within the tab while edit text window is open. Doing
so will prevent BrowserNav from correctly updating text in the edit box.</li>
<li>Make sure to release Control, Shift or Alt modifiers quickly affter
pressing Control+Enter, Shift+Enter, or Alt+Enter. Holding them for over a
second will cause problems.</li>
<li>This feature is currently experimental. Please expect only about 90-95%
success rate.</li>
<li>It has been thoroughly tested with Google Chrome and Firefox. It might
work in other browsers, but there's a higher chance of issues, such as
information loss.</li>
</ul>
Outlook 扩展http://addons.nvda-project.org/addons/outlookExtended.zh_CN.html2023-05-10T20:38:33Z2019-01-17T04:16:47Z
<ul>
<li>作者: Cyrille Bougot, Ralf Kefferpuetz</li>
<li>NVDA compatibility: 2019.3 and beyond</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=outlookextended">稳定版</a></li>
</ul>
<p>This addon improves the use of Microsoft Outlook by vocalizing some native
commands, adding extra commands and adds extra features.</p>
<h2>命令</h2>
<ul>
<li>Alt+1 到 Alt+9, Alt+0, Alt+-, Alt+=:
在消息,日历项或任务窗口中朗读标题1到12。按两次,将焦点移动到此字段。按三次,则将其内容复制到剪贴板。</li>
<li>NVDA+shift+I (台式机方按) / NVDA+control+shift+I (笔记本方按):
案一次,朗读消息,日历项目或任务窗口中的信息栏。按两次,则将焦点移动到上述项目。按三次,则将其内容复制到剪贴板。</li>
<li>NVDA+shift+A (台式机方按) / NVDA+control+shift+A (笔记本方案):
在消息窗口中朗读附件的编号和名称。按两次,则将焦点移动到附件。</li>
<li>NVDA + shift + M(台机布局)/ NVDA + control + shift + M(笔电布局):将焦点移到邮件正文。</li>
<li>NVDA+shift+N (desktop layout) / NVDA+control+shift+N (laptop layout):
Reports the notification in a message window. If pressed twice, moves the
focus to it. If pressed three times, copies its content to the clipboard.</li>
<li>Control+Q: 在消息列表中,将所选消息或消息组标记为已读。</li>
<li>Control + U:在消息列表中,将选定的消息或一组消息标记为未读。</li>
</ul>
<h2>Additional improvements</h2>
<ul>
<li>When the recipient you have entered in the To, Cc or Bcc fields sends
automatic out of office replies or is not present anymore on the Exchange
server, Outlook report it in the notification area. In this notification
area, you also have buttons to remove the address of these recipients.
This add-on will inform you with a ding when this notification area
appear, disappear or be updated. You can then press NVDA+shif+N /
NVDA+control+shift+N once to have it read and twice to jump to this
area. Then move with arrows on the recipient buttons and press a button to
remove the corresponding recipient.</li>
<li>In the address book's result list, you can use horizontal table navigation
commands to read the content of each column.</li>
</ul>
<h2>注意</h2>
<p>可以在NVDA命令手势对话框中修改所有手势。您可能希望修改它们,尤其是在以下情况下:</p>
<ul>
<li>将邮件标记为已读或未读的默认手势是Outlook英文版的手势。如果它们与Outlook本地版本不同,则必须相应地更改它们。</li>
<li>读取标题的默认手势对应于Alt与字母数字键盘第一行的键组合。如果它们与本地键盘布局不匹配,您可能需要重新映射读取标题11和12的手势。</li>
</ul>
<h2>更新日志</h2>
<h3>Version 2.1</h3>
<ul>
<li>Removed the dev channel.</li>
<li>新增本地化。</li>
</ul>
<h3>Version 2.0</h3>
<ul>
<li>Improve the user experience with notifications appearing when entering
e-mail addresses which are not valid anymore or which send automatic out
of office replies: a sound alerts when such notifications appear or are
updated, a gesture allows to read it or to move to it, and navigation in
this area with arrows is made more easy.</li>
</ul>
<h3>Version 1.10</h3>
<ul>
<li>Compatibility with NVDA 2023.1.</li>
<li>新增本地化。</li>
</ul>
<h3>Version 1.9</h3>
<ul>
<li>Compatibility with NVDA 2022.1.</li>
<li>Dropped compatibility for versions of NVDA below 2019.3.</li>
<li>The release is now performed thanks to a GitHub action instead of
appVeyor.</li>
<li>Fixed the announcement when the user triple-presses alt+number shortcuts.</li>
<li>Fixed an issue preventing from reading calendar items headers of some
versions of Outlook 365.</li>
<li>Improvement of the test environment of the add-on: navigation in the fake
root dialog.</li>
<li>新增本地化。</li>
</ul>
<h3>Version 1.8</h3>
<ul>
<li>新增本地化。</li>
<li>Ensure that all the variable from the original Outlook appModule are still
available.</li>
</ul>
<h3>版本1.7</h3>
<ul>
<li>更新兼容 NVDA 2021.1。</li>
<li>新增本地化。</li>
</ul>
<h3>版本1.6</h3>
<ul>
<li>修复了在 Outlook 365 中读取邮件头时的各种问题。</li>
<li>修复了使用盲文键盘时公告附件脚本中的错误。</li>
<li>添加了单元测试框架。</li>
<li>新增本地化。</li>
</ul>
<h3>版本1.5</h3>
<ul>
<li>现在可使用NVDA 2019.3。阅读信息栏。</li>
<li>通讯簿结果中的表浏览现在可用于NVDA 2019.3。</li>
</ul>
<h3>版本1.4</h3>
<ul>
<li>将焦点移到标题的脚本再次起作用。</li>
<li>当存在更多附件时,移至附件的脚本现在可以使用。</li>
<li>新增本地化。</li>
</ul>
<h3>版本1.3</h3>
<ul>
<li>修复了较新的Office 365版本的邮件标题读取。</li>
<li>更新以支持(兼容Python 2和3)。</li>
<li>新增本地化。</li>
<li>现在使用appveyor进行发布。</li>
</ul>
<h3>版本1.2</h3>
<ul>
<li>修复了转发会议时读取标题的问题。</li>
<li>新增本地化。</li>
</ul>
<h3>版本1.1</h3>
<ul>
<li>新增本地化。</li>
</ul>
<h3>版本1.0</h3>
<ul>
<li>发布初始版。</li>
</ul>
NVDA命令终结者http://addons.nvda-project.org/addons/trainingKeyboardCommands.zh_CN.html2023-07-15T02:39:11Z2019-01-17T04:16:45Z
<ul>
<li>作者: Ibrahim Hamadeh</li>
<li>下载<a>稳定版</a></li>
<li>下载<a>开发版</a></li>
</ul>
<p>此插件可以让您以类似游戏的形式,练习 NVDA 台式机或笔记本布局中的键盘命令。</p>
<p>所有的命令数据都抽取自 NVDA 安装目录的 documentation 中的 keyCommands.html。</p>
<p>该插件没有分配默认的手势快捷键,</p>
<p>你必须通过以下方式设置一个:NVDA菜单 > 选项 > 输入手势 > NVDA命令终结者。</p>
<h2>使用方法</h2>
<ul>
<li>打开游戏对话框后选择您要练习的键盘布局,然后开始游戏。</li>
<li>然后会显示一个包含了命令、描述和选项的问题,您必须从选项中选择一个正确答案。</li>
<li>如果答对了则增加一分。</li>
<li>如果答错了,分数不便,仍然可以继续作答下一题。</li>
<li>您随时可以退出游戏,退出时,您可以按照提示选择是否保存游戏记录。</li>
<li>日后您如果选择了一个包含记录的键盘布局,会提示您是否从已保存的记录开始游戏。</li>
<li>正确回答每个键盘布局中的大约 110 个问题后,您将获胜并取得“NVDA杯”冠军称号。</li>
</ul>
<p>https://www.nvaccess.org/addonStore/legacy?file=trainingKeyboardCommands</p>
<p>https://www.nvaccess.org/addonStore/legacy?file=trainingKeyboardCommands</p>
按列浏览列表http://addons.nvda-project.org/addons/columnsReview.zh_CN.html2024-02-13T14:38:26Z2018-11-27T20:34:27Z
<ul>
<li>Author: Alberto Buffolino, Łukasz Golonka, other contributors</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=columnsReview">stable version</a></li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=columnsReview-dev">development version</a></li>
<li>NVDA compatibility: 2017.3 and beyond</li>
</ul>
<p>Columns Review is an add-on to enhance NVDA experience with lists.</p>
<p>Its features include:</p>
<ul>
<li>customizable actions on column header and/or content (available actions
are read, copy, spell and show in browse mode);</li>
<li>ability to cycle between columns in ten-by-ten intervals;</li>
<li>simplified header management (mouse clicks);</li>
<li>on-demand reading of relative current item position (i.e.: item 7 of 10);</li>
<li>customizable gestures with or without numpad;</li>
<li>"0 items" announcement when list is empty (not working in Win8/10 folders,
unfortunately);</li>
<li>say all support;</li>
<li>report of selected items (amount and item names);</li>
<li>list search (with item multiselection, if checked/supported).</li>
</ul>
<h2>Gestures</h2>
<p>Default keys for columns, headers and position are NVDA+control, but you can
customize them from add-on settings (not "Input gestures" dialog!).</p>
<p>Note that your keyboard could have problems processing some key
combinations, so try all add-on gestures and adjust them for better results.</p>
<p>See also add-on preferences for numpad mode, keyboard layout (without
numpad), and the four available actions for columns.</p>
<ul>
<li>NVDA+control+digits from 1 to 0 (keyboard mode) or from 1 to 9 (numpad
mode): by default, read the chosen column if pressed once, copy it if
pressed twice;</li>
<li>NVDA+control+numpadMinus (numpad mode): like NVDA+control+0 in keyboard
mode, read or copy the 10th, 20th, etc column;</li>
<li>NVDA+control+- (keyboard mode, EN-US layout): in a list with 10+ columns,
change interval and process columns from 11 to 20, from 21 to 30, and so
on (change last char according to your layout, from settings);</li>
<li>NVDA+control+numpadPlus (numpad mode): like previous command;</li>
<li>NVDA+control+enter (numpadEnter in numpad mode): open header manager;</li>
<li>NVDA+control+delete (numpadDelete in numpad mode): read relative current
item position (i.e.: item 7 of 10);</li>
<li>Arrows and NVDA+tab (in empty list): repeat "0 items" message;</li>
<li>NVDA+downArrow (desktop layout) or NVDA+a (laptop layout): start say all
(this gesture depends on original one under "Input gestures"/"System
caret");</li>
<li>NVDA+shift+upArrow (desktop layout) or NVDA+shift+s (laptop layout):
report amount and names of current selected list items (like previous
command for customization);</li>
<li>NVDA+control+f: open find dialog (not customizable);</li>
<li>NVDA+f3: find next occurrence of previously entered text (not
customizable);</li>
<li>NVDA+shift+f3: find previous occurrence (not customizable).</li>
</ul>
<h2>Support</h2>
<p>This add-on provide a general support for more common lists (see below), and
some specific applications. Main author (Alberto Buffolino) cannot guarantee
compatibility/functionality for those applications he not uses, like Outlook
and Windows Mail, but he'll be happy to collaborate with their users or
accept a pull request for them.</p>
<p>Lists supported are:</p>
<ul>
<li>SysListView32;</li>
<li>DirectUIHWND (64位系统);</li>
<li>WindowsForms10.SysListView32.* (.NET应用);</li>
<li>multi-column treeview like as that presents in RSSOwlnix;</li>
<li>Mozilla table (主要是Thunderbird里的列表 支持对话列表).</li>
</ul>
NVDA文本导航http://addons.nvda-project.org/addons/textnav.zh_CN.html2023-05-10T20:38:33Z2018-11-10T06:10:40Z
<ul>
<li>作者: Tony Malykh</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=textnav">稳定版</a></li>
</ul>
<p>TextNav允许您只需案一次快捷键即可查找要在网页上阅读的文本。更确切地说,它添加了一个快捷键以跳转到下一个或前一个文本段落 -
这是一个包含一个或多个句子的段落。此功能可能有助于快速查找网页的文本部分或跳过菜单,广告和其他不重要的页面元素。</p>
<h2>快捷键:</h2>
<ul>
<li>Alt + Shift +下光标:转到下一个文本段落。</li>
<li>Alt + Shift +上光标:转到上一个文本段落。</li>
</ul>
NVDA音频图表http://addons.nvda-project.org/addons/AudioChart.zh_CN.html2024-02-13T14:37:43Z2018-11-10T06:10:39Z
<ul>
<li>作者: Tony Malykh</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=audiochart">stable version</a></li>
</ul>
<p>NVDA音频图表插件可以把excel时间序列转换维音频来连续播放。</p>
<h2>用法</h2>
<p>现在可以在Microsoft Excel中选择包含时间序列的单元格或单元格列。</p>
<h2>快捷键</h2>
<ul>
<li>NVDA + A:播放音频图表。</li>
<li>NVDA + A,连续案两次:显示校准对话框。笔记本键盘方按,请按NVDA + Control + Shift + A。</li>
</ul>
<h2>源代码</h2>
<p> https://github.com/mltony/nvda-audio-chart/</p>
NVDA蓝牙音频插件http://addons.nvda-project.org/addons/BluetoothAudio.zh_CN.html2023-05-10T21:28:25Z2018-11-10T06:10:39Z
<ul>
<li>作者: Tony Malykh</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=bluetoothaudio">稳定版</a></li>
</ul>
<p>蓝牙音频是一款NVDA插件,可在使用蓝牙耳机或扬声器时改善音质。</p>
<p>大多数蓝牙设备在几秒钟不活动后进入待机模式。这意味着当NVDA再次开始朗读时,声音的第一个瞬间就会丢失。蓝牙音频插件可以通过不断播放人耳无法听到的声播来防止蓝牙设备进入待机模式。</p>
<p>注意:使用蓝牙音频插件可能会缩短蓝牙设备的电池寿命。</p>
NVDACalibre图书支持插件http://addons.nvda-project.org/addons/calibre.zh_CN.html2023-05-10T20:38:33Z2018-11-01T12:46:05Z
<ul>
<li>作者: Javi Dominguez</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=cae">稳定版</a></li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=cae-dev">开发板</a></li>
</ul>
<p> 此插件主要改进了NVDA屏幕朗读器对Calibre eBook Management图书管理工具的无障碍支持。</p>
<ul>
<li>F10将焦点移到工具栏。然后你可以用标准键(标签和箭头)进行浏览;进入以激活项目和关键应用程序以显示上下文菜单;esc退出工具栏。</li>
<li>F12从Google中搜索当前图书</li>
<li>NVDA + Alt + End朗读当前库视图中的书籍总数和所选书籍的数量</li>
<li>NVDA + Control + H打开当前列设置的上下文菜单</li>
</ul>
<p>注意,快捷首饰可以在NVDA的首选项中进行自定义。>当窗口打开时,按下你需要使用的快捷手势。您还可以在首选项中定义NVDA读取库中表头的方式(行和列,仅列或无)。</p>
<p> 了解更多calibre键盘快捷键,请查看[Caliber]文档<a href="https://manual.calibre-ebook.com/gui.html">3</a>。</p>
<p> 此插件受GNU通用公共许可证的保护,有关详细信息,请参阅<a href="https://github.com/javidominguez/Calibre/blob/master/COPYING.txt">file COPYING.txt</a>。</p>
ToolbarsExplorer工具栏快速导航插件http://addons.nvda-project.org/addons/toolbarsExplorer.zh_CN.html2023-08-14T13:52:28Z2018-08-23T19:59:29Z
<ul>
<li>作者: Alberto Buffolino</li>
<li>下载<a href="https://www.nvaccess.org/addonStore/legacy?file=toolbarsExplorer">稳定版</a></li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=toolbarsExplorer-dev">开发板</a></li>
</ul>
<p>此插件可以使应用程序中的工具栏更易于使用,提供了由对象导航派生的探索模型,并具有简化的手势。</p>
<h2>快捷键</h2>
<ul>
<li>Alt+applications: 启动工具栏探索(您可以通过NVDA手势管理器在对象导航下重新设置此快捷手饰</li>
</ul>
<p>在探索期间,可以使用以下手势:</p>
<ul>
<li>Left/right arrow: 移动到上一个/下一个工具栏;</li>
<li>Up/down arrow: 在当前工具栏中向上/向下滚动项目;</li>
<li>Enter: 激活工具栏或其项目;</li>
<li>Space: 模拟鼠标左键单击工具栏或其项目;</li>
<li>Applications/shift+F10: 模拟鼠标右键单击工具栏或其项目;</li>
<li>Escape: 退出探索。</li>
</ul>
<p>此外,您可以使用NVDA提供的任何手势对工具栏或其项目执行操作,就像移动到具有标准对象导航的对象一样。</p>
<h2>注意</h2>
<p>探索终止显式按下escape,并在工具栏或其项目上隐式执行操作:</p>
<ul>
<li>在工具栏或其项目上执行操作(请使用 space, applications/shift+F10, enter)快捷键;</li>
<li>按下移出当前工具栏对象的手势可用以下快捷键 (alt, windows, tab, NVDA+F1, 对象导航手势等)。</li>
</ul>
<p>其他不包含alt,windows或转义的手势(如h,1,shift,shift + h,control + z)按下以上首饰后将无效。</p>
<h2>使用建议</h2>
<ul>
<li>插件安装/更新后,插件可能在Mozilla浏览器中首次使用无效;请重启NVDA和Mozilla浏览器来解决此问题;</li>
<li>在LibreOffice中,最佳配置可能是默认或单个工具栏,将其设置在视图菜单/工具栏位置。</li>
</ul>
输入锁http://addons.nvda-project.org/addons/inputLock.zh_CN.html2023-07-15T02:39:11Z2018-08-16T16:47:17Z
<ul>
<li>作者: Jose Manuel Delicado</li>
<li>NVDA 兼容性:2022.4 及更高版本</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=inputLock">稳定版</a></li>
</ul>
<h2>介绍</h2>
<p>你家里有小孩或宠物吗?你是否有一只喜欢爬桌子的猫?他喜欢在你的键盘上跳来跳去。亦或者,在你使用电脑时,可能会不小心移动了鼠标。那么,输入锁适合您,您可以在离开电脑时锁定键盘和鼠标。</p>
<p>安装完成后,您就可以锁定键盘和触摸屏,如果您的笔记本电脑配有鼠标和盲文点显器也可以锁定鼠标和盲文点显器。</p>
<h2>用法</h2>
<p>这个插件为NVDA添加了两个额外的手势。默认情况下,他们没有分配快捷键,因此您必须从“按键与手势”对话框中进行设置。有关更多信息,请阅读“NVDA用户指南”。</p>
<p>当您按下锁定键盘的快捷键时,NVDA会朗读“键盘已锁定”。此时,您的键盘会被锁定,直到您再次按下相同的快捷键,NVDA会朗读“键盘已解锁”,一切恢复正常状态。</p>
<p>当您按下锁定鼠标的快捷键时,鼠标会被锁定。再次按相同的快捷键可以解锁。当鼠标被锁定时,您依然可以使用 NVDA
的手势移动鼠标,并使用左右按钮单击,但您无法移动鼠标本身来改变鼠标指针位置。也可以在 NVDA 的设置对话框(NVDA 2018.2
及更高版本)中的“输入锁”类别或旧版本的插件设置对话框中禁用鼠标单击。此外,您还可以设置在启动 NVDA 时自动锁定鼠标。</p>
<p>注意:当鼠标单击被禁用时,您无法使用任何和鼠标相关的 NVDA 手势。</p>
<h2>限制和已知问题</h2>
<p>输入锁具有以下已知问题:</p>
<ul>
<li>即使键盘被锁定,也可使用Ctrl+ alt + del 和 Windows + L 快捷键。</li>
<li>在某些笔记本电脑上,鼠标被锁定后,触摸板仍然接收用户输入。</li>
</ul>
<h2>更新日志</h2>
<h3>版本 1.11</h3>
<ul>
<li>更新了最新的 NVDA 版本兼容性标志。</li>
<li>更新翻译。</li>
<li>目前,支持的最低NVDA版本为 2022.4。</li>
</ul>
<h3>版本1.10</h3>
<ul>
<li>更新了最新的 NVDA 版本兼容性标志。</li>
<li>更新翻译。</li>
<li>更新文档。</li>
<li>目前,支持的最低NVDA版本为 2021.3。</li>
<li>从睡眠模式恢复后,输入锁定模式会保持。感谢 Javi Dominguez。</li>
</ul>
<h3>版本1.9</h3>
<ul>
<li>更新了最新的 NVDA 版本兼容性标志。</li>
<li>更新翻译。</li>
<li>更新文档。</li>
</ul>
<h3>版本1.8</h3>
<ul>
<li>更新了最新的 NVDA 版本兼容性标志。</li>
<li>更新翻译。</li>
</ul>
<h3>版本1.7</h3>
<ul>
<li>更新了最新的 NVDA 版本兼容性标志。</li>
<li>更新翻译。</li>
</ul>
<h3>版本1.6</h3>
<ul>
<li>仅在卸载插件时才会删除设置。升级时,不会重置设置。</li>
<li>更新翻译。</li>
</ul>
<h3>版本1.5</h3>
<ul>
<li>与 NVDA 最新版兼容。</li>
<li>更新翻译。</li>
</ul>
<h3>版本1.4</h3>
<ul>
<li>默认情况下,插件手势未分配。</li>
</ul>
<h3>版本1.3</h3>
<ul>
<li>在设置对话框中添加了设置面板。对于旧版 NVDA 还添加了菜单项和设置对话框。</li>
<li>添加了在启动NVDA时锁定鼠标的设置。</li>
<li>添加了一个设置,可在鼠标锁定时禁用鼠标单击。</li>
<li>修复了小错误,优化了一些代码并减少了翻译人员的重复字符串</li>
</ul>
<h3>版本1.2</h3>
<ul>
<li>现在也可以锁定鼠标</li>
<li>用于锁定和解锁鼠标的新手势</li>
</ul>
<h3>版本1.1</h3>
<ul>
<li>如果另一个插件先前已向inputManager添加了捕获键盘输入功能,则在输入解锁时将恢复该功能。</li>
</ul>
<h3>版本1.0</h3>
<ul>
<li>发布初始版本</li>
</ul>
黑屏-Screen Curtainhttp://addons.nvda-project.org/addons/screenCurtain.zh_CN.html2023-08-04T02:21:32Z2018-08-07T19:05:16Z
<ul>
<li>作者: Babbage B.V., Joseph Lee</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=nvda7857">开发板</a></li>
<li>NVDA兼容版本: 2018.3至2019.2</li>
<li>这是旧版插件:NVDA 2019.3已集成黑屏功能。</li>
</ul>
<p>此插件主要是NVDA Core issue 7857的概念证明,主要实现了:在Windows
8及更高版本中添加屏幕幕布功能,这可以在运行NVDA的过程中让屏幕变黑,最终目的是保护用户的隐私不受侵犯。</p>
<p>要使用此插件,请打开NVDA菜单/工具/屏幕幕布。如果选中该项目,则幕布处于活动状态,否则将关闭。您还可以指定快捷键以从任何位置切换屏幕幕布。切换此功能时,NVDA将朗读状态信息,如果NVDA启动时屏幕幕布有效,将听到提示音。</p>
<p>要让NVDA在使用时打开屏幕幕布,请打开NVDA菜单/首选项/设置/屏幕幕布。选中“使用屏幕幕布”复选框以启用屏幕幕布,取消选中以禁用。您还可以在正常配置以外的配置文件处于活动状态时配置此设置,以便在配置文件处于活动状态时(例如,在使用应用程序时)使用屏幕幕布。</p>
<p>重要提示:这是概念插件。由于自2019.3起<a href="https://github.com/nvaccess/nvda/issues/7857">NVDA中已包含屏幕帘功能</a>,因此该插件已停止开发。</p>
<h2>版本18.08</h2>
<ul>
<li>发布初始版本。</li>
</ul>
NVDA插件更新器http://addons.nvda-project.org/addons/addonUpdater.zh_CN.html2023-10-01T03:03:51Z2018-07-29T18:33:01Z
<ul>
<li>作者: Joseph Lee, Luke Davis</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=addonUpdater">稳定版</a></li>
<li>NVDA compatibility: 2023.1</li>
<li>This is a would-be legacy add-on: NVDA 2023.2 includes add-on update check
functionality through add-on store</li>
</ul>
<p>此插件主要是NVDA Core issue 3208的概念证明,主要实现了:检查和更新插件的功能。</p>
<p>要在安装NVDA 插件更新器后检查已安装插件的更新,请转到 NVDA 菜单/工具/检查插件更新(如果 NVDA
检测到有更新,菜单项将显示“查看插件更新”,后紧跟可更新数量)。如果有可用更新,将显示可更新插件列表,每个条目由名称,当前版本,新版本和更新通道组成。选择更新,NVDA
将按顺序下载并安装更新,随后会显示重启 NVDA 的提示。</p>
<p>以下插件提供内置更新功能,因此不会通过此插件检查更新:</p>
<ul>
<li>Braille Extender</li>
<li>Tienda NVDA(西班牙 NVDA 社区商店)</li>
</ul>
<p>重要提示:</p>
<ul>
<li>This is a proof of concept add-on. Once the <a href="https://github.com/nvaccess/nvda/issues/3208">relevant feature is included
in NVDA</a> in the form of <a href="https://github.com/nvaccess/nvda/pull/13985">an add-on store</a> (introduced in NVDA
2023.2), this add-on will be discontinued.</li>
<li>This add-on requires Windows 10 Version 22H2 or later.</li>
<li>此插件不适用于安全屏幕。如果您在安全屏幕中安装了插件,即使您将该插件复制到安全屏幕,插件更新功能也不会起作用。</li>
<li>如果新版插件指定了兼容性范围(NVDA版本最低要求和最近测试的 NVDA 版本)且如果您运行的 NVDA 版本不在此兼容性范围内,则不会执行更新。</li>
<li>并非所有插件都具有开发版。如果您在选择某一插件的开发版通道后没有收到更新,请切换到该插件的稳定版通道。</li>
<li>在某些系统(特别是加入了公司域的计算机)上,插件更新功能可能无法正常工作,因此您必须手动下载更新。</li>
<li>Some features require NVDA to be installed on the computer.</li>
<li>某些插件的最新版会包含用于检查插件包完整性的 SHA256 哈希值(插件商店上发布的所有插件都包含 SHA256
哈希值),如果哈希值不匹配,插件更新将失败。</li>
</ul>
<h2>插件设置</h2>
<p>您可以在 NVDA 设置面板(NVDA 菜单,选项,设置)的 NVDA 插件更新器类别下对 NVDA 插件更新器进行设置。插件设置说明如下:</p>
<ul>
<li>自动检查插件更新:如果选中,NVDA 将每天检查一次更新。自动检查更新在 Windows 客户端系统上启用,在服务器系统上禁用。</li>
<li>Add-on update notification: you can choose to receive update notification
as a dialog or a toast. On server systems or running a portable copy of
NVDA, update notification will be shown as a dialog.</li>
<li>Update add-ons in the background (update notification is set to toast): if
checked, Add-on Updater will apply updates in the background. A toast will
appear informing you that add-on updates are being downloaded and
installed, followed by another message announcing update results. Same
limitations as add-on update notification setting and toast must be
selected from the above option in order for background updates to work.</li>
<li>不更新插件:您可以选择不希望更新的插件。</li>
<li>首选开发版本:此列表中选中的任何插件都将接收开发(预发布)的版本更新。</li>
<li>开发版发布通道(必须在“接收更新到开发板的插件”选项中选中相应插件):允许检查来自 Dev 或 Beta 通道的更新。</li>
<li>插件更新源:您可以选择从何处获取更新。目前 NVDA 插件更新器支持从已下插件更新源获取更新。更改更新源后将显示确认消息。</li>
</ul>
<p>可用的插件更新源:</p>
<ul>
<li>NV Access 插件商店(默认)</li>
<li>NVDA 官方插件社区</li>
<li>西班牙社区</li>
<li>NVDA 中文站和台湾社区</li>
</ul>
<h2>Version 23.10</h2>
<ul>
<li>Changed update notification message to mention NV Access add-on store if
running NVDA 2023.2 or later and add-on update source is set to add-on
store.</li>
</ul>
<h2>Version 23.09</h2>
<ul>
<li>Windows 10 Version 22H2 or later is required.</li>
</ul>
<h2>Version 23.08</h2>
<p>This is the final version to support Windows 7, 8, 8.1, and 10 21H2 and
earlier.</p>
<ul>
<li>Add-on update results dialog or toast message will be shown once add-on
store message is closed.</li>
<li>If add-on updates dialog is shown and then closed without installing
add-ons, NVDA will no longer report no add-on updates when add-on updates
are checked.</li>
<li>Add-on Updater will no longer present startup messages and perform update
checks if updating a portable copy of NVDA.</li>
</ul>
<h2>版本23.07</h2>
<ul>
<li>如果正在使用包含插件商店的 NVDA
版本,会显示一条信息,通知用户有关新插件商店的信息。这种情况下,不会显示插件更新结果对话框。插件更新器会继续工作。</li>
<li>改进了从 NV Access 插件商店和官方插件社区更新源检查插件更新时的性能,特别是在没有可用插件更新时。</li>
</ul>
<h2>版本 23.06</h2>
<ul>
<li>需要 NVDA 2023.1 或更高版本。</li>
<li>将默认的插件更新源从社区插件网站更改为 NV Access 插件商店。</li>
</ul>
<h2>版本 23.05</h2>
<ul>
<li>查看可用的插件更新时,将会显示插件更新频道。</li>
<li>如果使用包含插件商店的 NVDA 版本,将会显示一条有关插件商店的消息。</li>
</ul>
<h2>版本 23.04</h2>
<ul>
<li>添加了开发版更新通道设置,可以让用户在 Dev 和 Beta
更新通道之间进行选择。如果在“接收更新到开发板的插件”列表中选中相应插件,则会显示此选项。</li>
<li>插件更新器中优先使用 NV Access 插件商店更新源。</li>
</ul>
<h2>版本 23.03</h2>
<ul>
<li>由于某些更新源发生了更改,因此必须手动安装。</li>
<li>添加了 NV Access 插件商店作为实验性插件更新源。</li>
</ul>
<h2>版本 23.02</h2>
<ul>
<li>需要 NVDA 2022.4 或更高版本。</li>
<li>在检查插件更新后,NVDA 不再为大多数插件提供旧版插件更新。这适用于版本号为 number.number 的插件。</li>
</ul>
<h2>版本 23.01</h2>
<ul>
<li>如果更新源设置为“NVDA 官方插件社区”,NVDA 会检查插件的最低 Windows 版本。</li>
<li>提高了批量下载插件的性能。因此,下载进度对话框中显示的插件下载顺序是随机的。</li>
<li>插件的部分流程使用 Python 的 concurrent.futures 模块来提高性能,尤其是更新检查和下载过程。</li>
</ul>
<h2>版本 22.11</h2>
<ul>
<li>需要 NVDA 2022.3 或更高版本。</li>
</ul>
<h2>版本 22.10</h2>
<ul>
<li>添加 NVDA 中文站和台湾社区更新源(by Woody Tseng)。</li>
</ul>
<h2>版本 22.09</h2>
<ul>
<li>需要 NVDA 2022.2 或更高版本。</li>
<li>如果插件更新源包含插件包的哈希值,NVDA 将在下载插件更新时检查 SHA256 哈希值。如果哈希值无效,插件更新将失败。</li>
</ul>
<h2>版本 22.08</h2>
<ul>
<li>重大的内部代码重组和重写。</li>
<li>在 Windows 服务器系统上,默认情况下禁用自动插件更新检查功能(影响新安装)。</li>
<li>增加了选择不同插件更新源的能力。NVDA
插件更新器可以检查托管在社区插件网站(addons.nvda-project.org)或西班牙社区插件目录(nvda.es)上的更新。在插件设置面板中添加了一个新的组合框,用于选择插件更新源。</li>
<li>在 Windows 10 及更高版本上,如果运行安装版 NVDA 并且将插件更新通知方式设置为 toast,则可以让 NVDA
插件更新器在后台检查、下载和安装插件更新。</li>
<li>重新设计了更新多个插件时的下载和安装体验,包括使用单个对话框显示所有插件的下载进度以及在下载所有插件后更新插件。</li>
<li>如果 NVDA 设置为以 toast 方式显示更新通知,则当更新可用时,“检查插件更新”菜单项将变为“查看插件更新”,新名称中会包含可插件更新数。</li>
<li>在 NVDA 2022.1 及更高版本中,NVDA 插件更新器可以处理此插件的命令行开关(目前没有)。</li>
<li>在插件更新对话框中,默认情况下没有选中用户没有启用自动更新的插件,并且将显示一条确认消息,检查没有自动更新的插件并尝试更新它们,因为这样做会将没有自动更新的插件设为自动更新。</li>
</ul>
<h2>版本 22.07</h2>
<ul>
<li>插件使用的 URL 现在是托管在新模块中的常量(由 Luke Davis 提供)。</li>
<li>插件下载进度对话框现在位于屏幕中心。</li>
</ul>
<h2>版本 22.03</h2>
<ul>
<li>当 NVDA 在安全模式下运行时,该插件不会加载以提高安全性。</li>
</ul>
<h2>版本 22.02</h2>
<ul>
<li>需要 NVDA 2021.3 或更高版本。</li>
<li>在 Windows 10 上插件更新 toast 通知已可以被本地化。</li>
</ul>
<h2>版本 22.01</h2>
<ul>
<li>需要 NVDA 2021.2 或更高版本。</li>
<li>在 Windows Server 2016 及更高版本的服务器系统上,插件更新将显示在一个对话框中,而不是使用toast 通知。</li>
</ul>
<h2>版本 21.10</h2>
<ul>
<li>恢复某些环境下的插件检查更新功能,尤其是在新安装的 Windows 系统上。</li>
</ul>
<h2>版本 21.09</h2>
<ul>
<li>• 需要 NVDA 2021.1 或更高版本。</li>
<li>在 Windows 10 及更高版本的系统上,插件更新通知可以选择 toast 消息和更新对话框两种方式,您可以在 NVDA
设置面板中的插件更新器类别下进行设置。</li>
<li>NVDA 插件更新器将不再检查插件的最低 Windows 版本信息,因为 Windows App Essentials 等插件可以提供更好的
Windows 兼容性信息。</li>
</ul>
<h2>版本 21.07</h2>
<ul>
<li>在 Windows 10 及更高版本上,当有插件更新可用时,将以 toast 方式显示一条通知。请注意,您不能单击此通知——您必须打开 NVDA
菜单/工具/检查附加更新以查看更新。</li>
<li>当启动时显示“旧版插件”对话框时,现在可以像插件更新一样查看旧版插件和原因。</li>
<li>改进了插件更新的内部检查机制,包括使用社区提供的插件元数据收集来验证插件的兼容性。此外,这消除了为更新的插件检查有发行版插件更新的问题。</li>
</ul>
<h2>版本 21.05</h2>
<ul>
<li>如果在使用 NVDA 2021.1 alpha 快照时尝试检查更新,NVDA 将不再播放错误提示音,这是由 wxPython GUI
工具包的更改引起的。</li>
</ul>
<h2>版本 21.03</h2>
<ul>
<li>需要NVDA 2020.4 或更高版本。</li>
<li>如果在检查插件更新时发生错误(例如 Internet 连接丢失),NVDA 将显示一个错误对话框。</li>
</ul>
<h2>版本 20.11</h2>
<ul>
<li>需要 NVDA 2020.3 或更高版本。</li>
<li>使用 Flake8 解决了许多编码样式问题和潜在错误。</li>
<li>当 NVDA 从源代码运行且使用该插件时,NVDA 将不再播放错误提示音或显示为不执行任何操作。有关此事实的消息将改为记录在日志中。</li>
</ul>
<h2>版本20.07</h2>
<ul>
<li>需要NVDA 2020.1或更高版本。</li>
<li>如果安装了一个或多个旧版插件(如Screen Curtain),插件更新器现在会显示一条消息,要求您禁用或卸载列出的过时的插件。</li>
<li>现在您可以分别按Control+NVDA+C、Control+NVDA+R一次或Control+NVDA+R三次来保存、重新加载或重置插件更新器的设置。</li>
</ul>
<h2>版本20.06</h2>
<ul>
<li>使用 Flake8 解决了许多编码样式问题和潜在错误。</li>
</ul>
<h2>版本20.04</h2>
<ul>
<li>在尝试通过插件更新器更新插件时,NVDA 将不再显示操作或播放错误提示。</li>
<li>修复NVDA工具菜单中不存在“检查插件更新”菜单项的问题。</li>
</ul>
<h2>版本20.03</h2>
<ul>
<li>需要NVDA 2019.3或更高版本。</li>
<li>安装插件更新时,插件更新器将不再检查兼容性版本。 检查插件的兼容性现在有NVDA进行检测。</li>
</ul>
<h2>版本 19.11</h2>
<ul>
<li>当插件更新可用时,NVDA现在将读出有多少更新可用。</li>
</ul>
<h2>版本 19.09</h2>
<ul>
<li>需要NVDA 2019.2或更高版本。</li>
<li>现在,尝试下载某些插件更新(特别是GitHub上托管的插件文件)时出现的超时错误已得到解决。</li>
</ul>
<h2>版本 19.04</h2>
<ul>
<li>需要NVDA 2019.1或更高版本。</li>
<li>安装插件更新时, 将检查是否满足最低版本要求以及是否是最近测试的版本。</li>
</ul>
<h2>版本 19.01</h2>
<ul>
<li>需要NVDA 2018.4或更高版本。</li>
<li>检查插件更新时提升响应速度。</li>
<li>使插件与Python 3更兼容。</li>
</ul>
<h2>版本18.12.2</h2>
<ul>
<li>Python 3已准备完毕。</li>
<li>修复与最近NVDA alpha快照的兼容性,其中包括无法下载插件更新的BUG。</li>
</ul>
<h2>版本18.12.1</h2>
<ul>
<li>新增本地化支持。</li>
</ul>
<h2>版本18.12</h2>
<ul>
<li>现在可以检查已禁用插件的更新。插件将在更新后保持禁用状态。</li>
<li>在更新期间,如果插件需要特定的NVDA和/Windows,则会检查上数版本,如果其中一个不匹配,将显示错误提示并终止更新。</li>
<li>启用自动更新检查并准备好更新后,NVDA将显示更新列表,而不是询问您是否要查看更新。</li>
</ul>
<h2>版本18.10</h2>
<ul>
<li>初始发布稳定版(仍标记为概念证明)。</li>
</ul>
Access8Mathhttp://addons.nvda-project.org/addons/access8math.zh_CN.html2024-02-16T04:26:52Z2018-06-24T21:04:39Z
<ul>
<li>作者: Woody Tseng</li>
<li>下载<a href="https://www.nvaccess.org/addonStore/legacy?file=access8math">稳定版</a></li>
</ul>
<h1>Access8Math 功能</h1>
<p>此 NVDA 插件增强了数学内容的阅读和书写体验。</p>
<p>阅读功能包括可定制的语音/盲文输出,还能够使用交互式导航浏览从而将一个长数学内容分成较小的部分便于阅读。</p>
<p>书写功能包括易于编写 LaTeX/AsciiMath 的交互式菜单,还能够将纯文本转换为 HTML 文档,便于与他人协作。</p>
<h2>阅读功能</h2>
<ul>
<li>• 文字内容与数学内容整行阅读</li>
<li>交互导航缩放阅读数学内容</li>
<li>• 文本导航模式逐字阅读</li>
<li>简化朗读规则</li>
<li>数学内容项与项间停顿</li>
</ul>
<h2>书写功能</h2>
<ul>
<li>使用 LaTeX/AsciiMath/Nemeth 语法书写数学内容</li>
<li>使用菜单交互式书写 LaTeX 数学内容</li>
<li>使用快捷指令书写 LaTeX 语法</li>
<li>编辑过程中支持高效的光标导航</li>
<li>编辑过程中可阅读包含 LaTeX/AsciiMath/Nemeth 数据的文档</li>
<li>支持导出预览 HTML 文件</li>
</ul>
<h1>Access8Math 功能</h1>
<p>该 NVDA 插件提供了数学内容的阅读功能,原本 NVDA 也支持腧穴内容的阅读,但因为是调用了 MathPlayer
的功能,部份功能尚显不足,例如未提供或不完整的特定语言翻译、未提供特定语言的导航浏览等等。</p>
<p>交互式导航浏览可将一个长数学内容分成较小的部分进行阅读,并可以使用一系列的键盘按键操作来选择需要阅读的部分和阅读的方式,此功能可以更好的理解长数学内容结构与项与项之间的层级关系。</p>
<p>该插件提供了数学表达式的书写功能,通过交互式菜单,无需记忆 LaTeX 语法就可以完成数学表达式的书写,书写完成后可以导出视觉阅读友好的 HTML
文件,便于跟他人交流互动。</p>
<h2>阅读功能</h2>
<p>朗读: 可以朗读在网页浏览器(Mozilla Firefox, Microsoft Internet Explorer 和 Google
Chrome)上以 MathML 书写的数学内容或在 Microsoft Word 上以 MathType 书写的数学对象(需安装 MathType)</p>
<p>交互:
在数学对象上按下空格键或回车键可与该数学内容进行可交互式的导航浏览,即可以浏览数学内容中的子内容并在子内容间移动或缩放子内容大小(此处所谓“子内容”可以是表达式中的各个部分,如分式的分子、分母,具体的表达式中的某一项等)</p>
<ul>
<li>分析内容整体的数学意义:将数学内容进行语义分析,符合特定规则时,以该规则的数学意义进行朗读</li>
<li>分析数学内容的整体语义:将数学内容进行语义分析,符合特定规则时,以该规则的数学语义进行朗读</li>
</ul>
<h3>交互式导航命令</h3>
<p>交互式导航时可以使用以下命令:</p>
<ul>
<li>“下光标”:缩小当前数学内容成更小的子内容</li>
<li>“上光标”:放大当前数学内容成更大的子内容</li>
<li>“左光标”:向前一项数学内容</li>
<li>“右光标”:向后一项数学内容</li>
<li>“行首”:回到最顶层(朗读完整的数学内容)</li>
<li>"Ctrl+c": 复制对象MathML源代码。</li>
<li>“数字键盘 1~9”:使用 NVDA 文本查看模式阅读数学内容(笔记本键盘方案请参看 NVDA 用户指南的文本查看相关章节)</li>
<li>“ESC”:退出导航模式。</li>
</ul>
<h2>书写功能</h2>
<p>书写混合内容(文字内容与数学内容)</p>
<p>在 windows 11 必须使用 Access8Math 编辑器;而在 windows 10 或更早版本可使用 Access8Math
编辑器或记事本。建议使用 Access8Math 编辑器编写混合内容。</p>
<p>为了区分文本内容和数学内容,您可以使用分隔符将数学符号区域括起来。这意味着数学符号区域内的任何数据都将根据指定的分隔符被视为数学内容,而数学符号区域之外的数据将被视为文本内容。</p>
<p>| 分类 | 开始标记 | 结束标记 | | --- | --- | --- | | LaTeX(括号) | ( | ) | | LaTeX(美元)
| $ | $ | | AsciiMath | <code>|</code> | | Nemeth(UEB) | <em>% | </em>: | | Nemeth(at) | @ |
@ |</p>
<p>您可以在书写设置中选择 LaTeX/Nemeth 使用的分隔符。</p>
<h3>命令手势(开关:NVDA+alt+c)</h3>
<p>alt+m:弹出标记命令窗口,选择 LaTeX/AsciiMath/Nemeth 按下 enter
键就会在当前所选择文字前后(未选择文字时为当前光标处)插入 LaTeX/AsciiMath/Nemeth
标记分隔符,并会将光标自动移动到两分隔符之间,便于快速输入内容。</p>
<p>alt+l:彈出 LaTeX 命令窗口,选择要加入的 LaTeX 命令项目按下 enter 键,就会在当前光标处加入 LaTeX
语法,并且会将光标移动到适当的位置,便于快速输入内容。</p>
<p>LaTeX 命令窗口</p>
<ul>
<li>移动到任意 LaTeX 命令项并按英文字母 (a~z) 或 f1~f12 设置快捷键</li>
<li>移动到任意 LaTeX 命令项并按删除/退格键即可删除已设置的快捷键</li>
<li>移动到任意LaTeX命令项并按回车键即可在当前光标处添加对应的LaTeX语法</li>
</ul>
<p>alt+i:若光标停留在数学区域可与该数学内容进行交互式导航</p>
<p>alt+h 可转换出包含文字内容与数学内容的 HTML 文件并可进行预览或导出。其中数学区域的内容汇转成 MathML 便于跟普通文字一起呈现。</p>
<ul>
<li>预览:通过已设置的关联 .HTML 扩展名的程序打开转换后的 HTML 文件。</li>
<li>导出:将转换后的HTML文件和原始文本文件打包成压缩文件。</li>
</ul>
<p>alt+t:可以将光标所在数学区域内的内容在 LaTeX 与 AsciiMath 之间转换(光标需停留在 LaTeX 或 AsciiMath 区域内)</p>
<p>在书写设置内可以选择是否‘默认启用命令手势’,编辑区域内按 NVDA+alt+c 开启或关闭命令手势(可以在按键与手势对话框内更改)。</p>
<h3>书写区域导航手势(开关:NVDA+alt+n)</h3>
<ul>
<li>alt+左光标:移动到上一个区域的开始点</li>
<li>alt+下光标:不移动仅读出当前区域的内容</li>
<li>alt+右光标:移动到下一个区域的开始点</li>
<li>alt+home:移动到当前区域的开始点</li>
<li>alt+end:移动到当前区域的结束点</li>
<li>alt+shift+左光标:移动到上一个区域并选取</li>
<li>alt+shift+下光标:不移动仅选取当前区域</li>
<li>alt+shift+右光标:移动到下一个区域并选取</li>
</ul>
<p>在书写设置内可以选择是否‘默认启用区域导航手势’,编辑区域内按 NVDA+alt+n 开启或关闭区域导航手势(可以在按键与手势对话框内更改)。</p>
<h3>快捷指令手势(开关:NVDA+alt+s)</h3>
<p>当光标在 LaTeX 区域时,按字母、 f1~f12 可快速插入 LaTeX 语法。按 shift+字母、shift+f1~f12 可读出该快捷键绑定的
LaTeX 快捷指令,需先在 LaTeX 菜单中设置。</p>
<p>在书写设置内可以选择是否‘默认启用快捷指令手势’,编辑区域内按 NVDA+alt+s 开启或关闭快捷指令手势(可以在按键与手势对话框内更改)。</p>
<h3>希腊字母手势(开关:NVDA+alt+g)</h3>
<p>当光标在 LaTeX 区域时,按字母可快速输入对应的 LaTeX 语法。</p>
<p>对照表</p>
<p>| 英文字母 | 希腊字母 | LaTeX | | --- | --- | --- | | a | α | \alpha | | b | β |
\beta | | c | θ | \theta | | d | δ | \delta | | e | ε | \epsilon | | f | φ |
\phi | | g | γ | \gamma | | h | η | \eta | | i | ι | \iota | | k | κ |
\kappa | | l | λ | \lambda | | m | μ | \mu | | n | ν | \nu | | o | ο |
\omicron | | p | π | \pi | | r | ρ | \rho | | s | σ | \sigma | | t | τ |
\tau | | u | υ | \upsilon | | v | φ | \psi | | w | ω | \omega | | x | χ |
\chi | | y | ξ | \xi | | z | ζ | \zeta |</p>
<h3>浏览导航模式(开关:NVDA+space)</h3>
<p>当浏览导航模式开启时,光标移动读出的数学内容区域为语义化内容,而非数学表达式源代码。</p>
<p>可以使用以下按键手势移动编辑光标或交互导航</p>
<ul>
<li>左光标:移动到上一个区域的开始点并读出</li>
<li>右光标:移动到下一个区域的开始点并读出</li>
<li>上光标:移动到上一行并读出该行所有区域的内容</li>
<li>下光标:移动到下一行并读出该行所有区域的内容</li>
<li>上翻页:向上移动十行并读出该行所有区域的内容</li>
<li>下翻页:向下移动十行并读出该行所有区域的内容</li>
<li>行首:移动到光标所在行的第一个区域</li>
<li>行尾:移动到光标所在行的最后一个区域</li>
</ul>
<p>以上光标移动按键加上 Shift 会一并选择文字</p>
<p>空格/回车:光标停留在数学区域则与此数学内容进行交互式导航</p>
<p>下列按键,若按下单一按键,编辑光标会移动到其对应的后一个区域位置,若同时按下 Shift 键,编辑光标会移动到前一个区域位置</p>
<ul>
<li>l: 移动到下一个 LaTeX 区域并读出</li>
<li>a: 移动到下一个 ASCIIMath 区域并读出</li>
<li>n:移动到下一个Nemeth区域并读出</li>
<li>m: 移动到下一个 MathML 区域并读出</li>
<li>t: 移动到下一个 文字 区域并读出</li>
<li>tab: 移动到下一个 可互动区域(数学区域)并读出</li>
</ul>
<p>可以使用以下按键编辑或修改相应区域</p>
<ul>
<li>ctrl+x:剪切当前光标所在区域</li>
<li>ctrl+c:复制当前光标所在区域</li>
<li>ctrl+v:在当前光标所在区域后粘贴内容</li>
<li>删除/退格:删除当前光标所在区域</li>
</ul>
<h3>Access8Math 编辑器与 Access8MathDocument。</h3>
<p>自 Windows11
起,系统内置记事本改为富文本编辑器而非传统的纯文本编辑器,所以必须使用插件内置编辑器书写数学内容,插件内置编辑器也提供了打开、保存、预览等功能。</p>
<p>使用 Access8Math 编辑器可书写 markdown
文档且当有资源时支持将资源放在工作目录下进行引用。当选择导出时,会将所引用的资源一并打包成压缩文件。</p>
<p>预览菜单下的导出和预览功能与虚拟菜单(Alt+H)的功能相似,可生成 Access8Math Document
文件,前者会将所引用的资源一并打包到压缩包内。</p>
<p>为了可以让 Access8Math 导出的文件可以导入重新编辑,Access8Math 编辑器导出时会写入一个 Access8Math.json
该文件为元数据,我们称包含该元数据的压缩包为 Access8MathDocument。</p>
<p>在文件管理器内可按下快捷键 NVDA +Application 键,当所选文件为 txt/Access8Math Document
时,可快速打开阅读或编辑该文件。</p>
<h3>示例:</h3>
<ul>
<li>LaTeX(使用括号作为分隔符):一元二次方程 (ax<sup>2</sup>+bx+c=0) 的解为
(\frac{-b\pm\sqrt{b<sup>2</sup>-4ac}}{2a}) 。</li>
<li>LaTeX(使用美元作为分隔符):一元二次方程 $ax<sup>2</sup>+bx+c=0$ 的解为 $\frac{-b\pm\sqrt{b<sup>2</sup>-4ac}}{2a}$
。</li>
<li>AxciiMath:一元二次方程式 <code>ax^2+bx+c=0</code> 的解为 <code>x=(-b+- \sqrt(b^2-4ac))/(2a)</code> 。</li>
<li>Nemeth(UEB): 一元二次方程式 <em>%⠁⠭⠘⠆⠐⠬⠃⠭⠬⠉⠀⠨⠅⠀⠴</em>: 的解为 <em>%⠭⠀⠨⠅⠀⠹⠤⠃⠬⠤⠜⠃⠘⠆⠐⠤⠲⠁⠉⠻⠌⠆⠁⠼</em>:</li>
<li>Nemeth(at): 一元二次方程式 @⠁⠭⠘⠆⠐⠬⠃⠭⠬⠉⠀⠨⠅⠀⠴@ 的解为 @⠭⠀⠨⠅⠀⠹⠤⠃⠬⠤⠜⠃⠘⠆⠐⠤⠲⠁⠉⠻⠌⠆⠁⠼@。</li>
<li>MathML:一元二次方程式 ax2+bx+c=0
的解为 −b±b2−4ac2a
。</li>
</ul>
<h2>设置</h2>
<p>所有 Access8Math 的设置都在 NVDA 菜单 > 工具 > Access8Math 菜单内。</p>
<h3>阅读设置</h3>
<ul>
<li>语言:Access8Math 朗读数学内容的语言</li>
<li>分析内容整体的数学意义:将数学内容进行语义分析,符合特定规则时,以该规则的数学意义进行朗读</li>
<li>进入交互模式时显示交互窗口:激活数学对象进入交互模式,是否显示交互窗口,</li>
<li>读出字典中的预定义含义:在交互模式下导航浏览时,若字典文件中有定义则使用字典中的定义读出该项在其上层中的含义</li>
<li>读出自动生成的含义:在交互模式下导航浏览时,若字典文件中的定义不完整或无定义,则使用自动生成功能读出该项在其上层中的含义</li>
<li>在交互模式下使用音效来提示无法移动</li>
<li>设置数学内容项目与项目间朗读停顿的时间,数值从1到100,数值越小表示停顿时间越短,反之数值越大表示停顿时间越长。</li>
</ul>
<h3>书写设置</h3>
<ul>
<li>默认启用命令手势</li>
<li>默认启用区域导航手势</li>
<li>默认启用快捷手势</li>
<li>以音效提示浏览导航模式的切换</li>
<li>HTML 文档呈现</li>
<li>HTML 公式呈现</li>
<li>LaTeX 分隔符</li>
</ul>
<h3>规则设置:选择某规则是否启用的设置</h3>
<h3>数学阅读器</h3>
<ul>
<li>语音来源</li>
<li>盲文来源</li>
<li>交互来源</li>
</ul>
<h2>本地化</h2>
<p>如果您希望 Access8Math 使用不同语言进行 MathML 的语音/盲文输出,则需要创建 Unicode 字典 (unicode.dic) 和数学规则 (math.rule)。这可以使用 Access8Math -> 本地化中的 GUI 来完成,或者通过编辑插件文件夹中的 globalPlugins/Access8Math/locale 来完成。</p>
<p>“Unicode 字典”可以让您自定义符号/字符的语音或盲文输出。 “数学规则”允许您为不同类型的数学自定义语音或盲文输出。</p>
<p>「添加新语言」可加入插件未提供的语言,加入后在常规设置内会多出刚添加的语系并可随后通过「unicode 朗读字典」与「数学规则」定义读法实现多语言机制</p>
<h3>数学规则</h3>
<p>Access8Math
将常用数学表达式依据类型与逻辑,建立了数学规则,程序依据这套规则判断数学表达式的朗读方式与朗读顺序,根据各地习惯不同,可以更改数学表达式的朗读顺序与朗读方式,更改方法如下:</p>
<p>编辑: 进入"数学规则"后,窗口内有数学规则列表,选则任一规则后可选择"编辑按钮"进入编辑条目。</p>
<p>规则的"编辑条目"可分为两大部分,分别是序列化顺序与子节点角色。</p>
<ul>
<li>序列化顺序:将数学规则根据朗读顺序划分多个部分,在此部分可更改规则子项目的朗读顺序及开始、项目间和结束文本的分隔内容,以分数规则 mfrac
为例,此规则分为五个朗读顺序,顺序0、2和4分别代表开始提示、项目间提示与结束提示,可在各字段中输入自己习惯的朗读方式,而顺序1和3则可调整子节点朗读的先后,可在组合框中更改其顺序。</li>
<li>子节点角色:数学规则的下一级子项。以分数规则mfrac为例,该规则包含分子和分母。上层子内容含义中的子内容可以在子节点角色字段中更改。</li>
</ul>
<p>示例:预览编辑修改后的规则读法,点击后会出现一个使用该规则的数学内容,供用户确认该类型的规则修改是否符合预期。</p>
<p>恢复默认值:将数学规则列表恢复到初始默认值。</p>
<p>导入:将数学规则文件导入,可用于加载数学规则文件。</p>
<p>导出:将数学规则文件保存到指定路径,便于分享或保存数学规则文件。</p>
<h2>例子</h2>
<p>维基百科上的数学内容都以 MathML 书写而成</p>
<ul>
<li>二次方程:https://en.wikipedia.org/wiki/Quadratic_equation</li>
<li>矩阵乘法:https://zh.wikipedia.org/zh-tw/%E7%9F%A9%E9%99%A3%E4%B9%98%E6%B3%95</li>
<li>三次方城市:https://zh.wikipedia.org/zh-tw/%E4%B8%89%E6%AC%A1%E6%96%B9%E7%A8%8B</li>
</ul>
<p>二次方程</p>
<ul>
<li>LaTeX: (x=\frac{-b\pm\sqrt{b<sup>2</sup>-4ac}}{2a})</li>
<li>AsciiMath: <code>x=(-b+- \sqrt(b^2-4ac))/(2a)</code></li>
<li>MathML: -b±b2-4ac2a</li>
</ul>
<p>github: https://github.com/tsengwoody/Access8Math</p>
<p>欢迎提出见意与 bug 反馈,谢谢!</p>
<h1>Access8Math 更新日志</h1>
<h2>Access8Math v3.6 更新</h2>
<ul>
<li>新功能:Nemeth 盲文输入,与 LaTeX 输入具有相同的功能。允许在编辑过程中进行实时交互式导航(Alt+I),并支持输出
HTML+MathML 文档。</li>
<li>新功能:添加 Nemeth 分隔符 UEB/at(@@) 以区分 Nemeth 内容。</li>
<li>新功能:您可以在交互式导航模式下从 Math 对象转换和复制 LaTeX。</li>
<li>添加了 NVDA+Shift+F10 快捷方式以在文件资源管理器中打开虚拟上下文菜单。</li>
<li>修复并优化了本地化 UI 问题并清理了本地化文件格式。</li>
</ul>
<h2>Access8Math v3.5 更新</h2>
<ul>
<li>可以正确区分向量和射线</li>
<li>在 Access8Math HTML 文档中使用对话框显示图片、视频和音频资源</li>
<li>在 Access8Math HTML 文档中使用新窗口打开链接。</li>
<li>在交互式导航模式下从 Math 对象复制 MathML 时增加 MathML 命名空间</li>
<li>Access8Math 编辑器增加了显示字体的调整,以及查找与替换功能</li>
<li>与 NVDA 2023.1 兼容</li>
</ul>
<h2>Access8Math v3.4 更新</h2>
<ul>
<li>语音、盲文、交互来源,移动到 NVDA 菜单 -> 选项 -> 设置 -> 数学阅读器的类别下。</li>
<li>集成 MathCAT,若安装了 Math Player/MathCat,您可以在数学阅读器类别下选择您需要的语音、盲文及交互来源。</li>
<li>使用 MultiCategorySettingsDialog 整合设置对话框。</li>
<li>按 NVDA+Alt+E 在文件管理器中使用内置编辑器打开文件。</li>
<li>虚拟菜单中的子菜单支持使用回车展开。</li>
<li>支持 MathML menclose tag 规则。</li>
<li>新功能:在文件管理器弹出的虚拟菜单下,可以快速打开阅读或编辑Access8Math 文档。(请阅读 Access8Math Document
相关章节以了解该部分内容)。</li>
</ul>
<h2>Access8Math v3.3 更新</h2>
<ul>
<li>新增插件内置编辑器, Windows11 系统可使用该编辑器</li>
<li>内置编辑器新增打开、保存功能</li>
<li>Access8math 初始语言与 NVDA 语言保持一致</li>
<li>改进了虚拟菜单中的语音和盲文显示</li>
<li>兼容 NVDA2022.1</li>
<li>修复当文件为空时无法打开标记命令窗口</li>
<li>修复转换 LaTeX/AsciiMath 功能</li>
<li>修复 HTML 文件显示设置选「文字」选项时 HTML 文件渲染问题</li>
</ul>
<h2>Access8Math v3.2 更新</h2>
<ul>
<li>新增使用‘’分隔区域,两‘’之间为 AsciiMath 数学内容</li>
<li>新增浏览导航模式下的编辑快捷键 - 剪切(ctrl+x)、复制(ctrl+c)、粘贴(ctrl+v)、删除(delete/back space)</li>
<li>新增浏览导航模式下的快速移动按键 - 在可交互区域之间移动(tab)、在 AsciiMath 区域之间移动(a)</li>
<li>调整了浏览导航模式下的快捷键 - 上下左右光标移动并读出相应区域的内容</li>
<li>浏览导航模式光标移动时,数学区域会读出语义化的数学内容,而非表达式源代码</li>
<li>浏览导航模式光标停留在数学内容区域可以按下 space 或 enter 与该数学区域交互式导航</li>
<li>新增可使用英文字母按键设置快捷指令</li>
<li>新增希腊字母手势</li>
<li>快捷指令输入仅在 LaTeX 区域有效</li>
<li>可以设置用音效或语音提示浏览导航模式的切换</li>
<li>LaTeX 命令窗口在文本编辑区域可以开启,并且会在插入时自动增加 LaTeX 分隔符</li>
<li>新增转换菜单,可以将光标所在数学区域 LaTeX/AsciiMath 互相转换,属于命令手势组,当光标停留在 LaTeX/AsciiMath
区域时,按下 alt+t 可以打开转换菜单(在浏览导航模式下为 ctrl+t)</li>
<li>新增批处理转换,可以将整份 LaTeX/AsciiMath 格式文件互相转换、可以将 LaTeX 分隔符在括号与美元之间转换。属于命令手势组,按下
Alt + B 打开批处理菜单。</li>
<li>新增 MathML 区域类型,支持 alt+i,浏览导航模式下直接朗读与m 或 tab 移动</li>
<li>新增盲文自定义数学规则和 unicode 字典,跟语音相同</li>
<li>导出的 HTML 可以用 markdown 语法呈现</li>
<li>导出的 HTML 根据记事本的标题增加页标题与文档名称</li>
</ul>
<h2>Access8Math v3.1 更新</h2>
<ul>
<li>HTML 窗口改成以虚拟菜单形式呈现</li>
<li>修正当文件中包含「`」无法正常转 HTML 预览</li>
<li>修正当文件内容超过 4096 个字时无法转 HTML 预览</li>
<li>新增常用集合 LaTeX 命令</li>
<li>更新 alt+m 在当前选择文本前后(未选择文本时为当前光标处)插入「(」、「)」 LaTeX 分隔符</li>
<li>在常规设置中增加导出的 HTML 中的数学内容是否在独立一行</li>
<li>导出 HTML 时,同时将原始文件保存在压缩包内</li>
<li>在常规设置中可以选择使用美元或括号作为 LaTeX 分隔符</li>
<li>在常规设置中可以选择语音、盲文、交互的来源(Access8Math 或 Math Player)</li>
<li>使用手势开关书写手势、区域导航手势、快捷手势、</li>
<li>使用手势切换语音、盲文、交互的来源(Access8Math 或 Math Player)</li>
</ul>
<h1>Access8Math v3.0 更新</h1>
<ul>
<li>以 AsciiMath书写数学内容</li>
<li>以 LaTeX 书写数学内容</li>
<li>书写混合内容(文字内容与数学内容)</li>
<li>在编辑区内容以快捷键移动光标至不同类型区域</li>
<li>在编辑区内容使用命令菜单选择命令</li>
<li>在 LaTeX 命令菜单设置快捷键</li>
<li>在编辑区内预览和导出内容为 HTML</li>
</ul>
<h1>Access8Math v2.6 更新</h1>
<ul>
<li>开启交互式窗口后会自动进入交互模式</li>
<li>可以选择在交互模式下如何提示‘无法移动」的方式:提示音或语音「无法移动」两种,在常规设置内新增了「使用提示音来提示无法移动」的选项</li>
<li>无法移动时会再重复朗读一次当前项的内容</li>
</ul>
<h1>Access8Math v2.5 更新</h1>
<ul>
<li>加入俄语的翻译,感谢 Futyn-Maker 的翻译工作</li>
<li>修正复合符号翻译失败的问题</li>
<li>移除在 en unicode.dic 内重复的小写字母并加入大写字母(0370~03FF)</li>
</ul>
<h1>Access8Math v2.4 更新</h1>
<ul>
<li>修正已知问题</li>
</ul>
<h1>Access8Math v2.3 更新</h1>
<ul>
<li>兼容 Python3</li>
<li>重构模块修正代码风格</li>
<li>加入单符号向量规则</li>
</ul>
<h1>Access8Math v2.2 更新</h1>
<ul>
<li>修政单一节点存在多个字符时无法正确朗读</li>
<li>修政设置窗口的兼容性问题,可兼容 NVDA 2019.2,感谢 CyrilleB79 的 pull requests</li>
<li>修政 unicode 有重复符号时的错误</li>
<li>加入法语的翻译,感谢 CyrilleB79 的翻译工作</li>
<li>修政部份快捷键</li>
</ul>
<h1>Access8Math v2.1 更新日志</h1>
<ul>
<li>在「常规设置」中,可设置进入交互模式时,是否自动显示「Access8Math 交互窗口」</li>
<li>在交互模式中,当未显示交互窗口时,可通过 ctrl+m 来手动显示交互窗口</li>
<li>修政多语言切换问题</li>
<li>加入土耳其语的翻译,感谢 Cagri(Çağrı Doğan) 的翻译工作</li>
<li>兼容性更新,针对 NVDA 2019.1 对插件 manifest 标识的检查</li>
<li>重构对话框源代码</li>
</ul>
<h1>Access8Math v2.0 更新日志</h1>
<ul>
<li>加入多语言新增自定义设置功能,新增三个窗口「unicode 字典」、「数学规则」、「加入新语言」</li>
<li>unicode 字典可自定义各项符号文字的朗读方式。</li>
<li>数学规则可自定义各数学类型的朗读方式并可支持修改前预览朗读效果</li>
<li>加入新语言可加入内置未提供的语言,加入后在常规设置内会多出刚新增的语言并可再通过「unicode 字典」与「数学规则」定义读法达到多语言自定义设置</li>
<li>优化在交互模式下,可使用数字键7~9以行为单位阅读序列文字</li>
</ul>
<h1>Access8Math v1.5 更新日志</h1>
<ul>
<li>在「常规设置」新增项与项间停顿时间设置。数值从1到100,数值越小表示停顿时间越短,反之数值越大表示停顿时间越长。</li>
<li>修复设置对话框无法保存。</li>
</ul>
<h1>Access8Math v1.4 更新日志</h1>
<ul>
<li>调整设置对话框,分为「常规设置」、「规则设置」对话框。「常规设置」为原「Access8Math
设置」对话框,「规则设置」对话框则为可选择特定规则是否启用的设置。</li>
<li><p>新规则</p>
<ul>
<li>向量规则:当两个标识符正上方有一个“⇀”时,该项被朗读为“向量...”。</li>
<li>弧度规则:当两个Identifier的正上方有「⌢」时,将该项朗读为「弧……」</li>
</ul>
</li>
<li><p>修正已知问题</p></li>
</ul>
<h1>Access8Math v1.3 更新</h1>
<ul>
<li><p>新规则</p>
<ul>
<li>正规则:当「+」在首项或其前项为标记时,将「+」读为「正」而非「加」</li>
<li>平方规则:当次方数为2时,将其读为「…的平方」</li>
<li>立方规则:当次方数为3时,将其项读为「…的立方」</li>
<li>直线规则:当两个Identifier的正上方有「↔」时,将该项朗读为「直线……」</li>
<li>线段规则:当两个Identifier的正上方有「¯」时,将该项朗读未「线段……」</li>
<li>射线规则:当两个标识符正上方有一个“→”时,该项朗读为“射线...”</li>
</ul>
</li>
<li><p>添加交互窗口:在数学公式按“空格”键打开“Access8Math交互窗口”,其中包含“交互”和“复制”按钮。</p>
<ul>
<li>交互:进入数学内容进行导航和浏览。</li>
<li>复制:复制 MathML 对象源代码。</li>
</ul>
</li>
<li><p>添加zh CN UI语言(.po)。</p></li>
<li>调整规则之间的继承关系,确保冲突时正确使用相应的规则。</li>
<li>修正已知问题</li>
</ul>
<h1>Access8Math v1.2 更新日志</h1>
<ul>
<li><p>新规则</p>
<ul>
<li>负数规则:当第一项或其前一项中的减号是某个运算符时,读“负”而不是“减号”。</li>
<li>整数加分数规则:当分数前一项为整数时,读取整数和分数之间的“加”。</li>
</ul>
</li>
<li><p>程序架构完善</p>
<ul>
<li>添加兄弟类</li>
<li>添加动态生成Complement类</li>
</ul>
</li>
<li><p>修复错误</p></li>
</ul>
<h1>Access8Math v1.1 更新日志</h1>
<ul>
<li>在导航模式命令中,“Ctrl+c”复制对象 MathML 源代码。</li>
<li><p>选项中的设置对话框:</p>
<ul>
<li>语言:Access8Math 朗读数学内容的语言</li>
<li>分析内容的数学意义:将数学内容进行语义化分析,符合某规则会使用相应的语音朗读及盲文显示</li>
<li>读取字典中定义的含义:若字典文件中有定义则使用字典中的定义读出该项在其上层中的含义</li>
<li>读出自动生成的含义:在交互模式下导航浏览时,若字典文件中的定义不完整或无定义,则使用自动生成功能读出该项在其上层中的含义</li>
</ul>
</li>
<li><p>添加一些简化规则。简化规则是各种规则的简化版本。当内容只有一项时,为了更好理解和阅读而不混乱,可以省略某些部分。</p></li>
<li>更新 unicode.dic。</li>
<li>修正已知问题</li>
</ul>
文本信息http://addons.nvda-project.org/addons/textInformation.zh_CN.html2023-05-10T20:38:33Z2018-05-05T15:13:43Z
<ul>
<li>作者: Carter Temm</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=txtinfo">稳定版</a></li>
</ul>
<p>此插件允许根据选定的文本获取信息。只需选择一些内容并使用按键即可获取信息。希望你能得到适合上下文的消息。</p>
<p>注意:此插件包是根据GNU通用公共许可证第2版或更高版本的条款进行分发的。有关更多详细信息,请参阅文件COPYING.txt。</p>
<h2>快捷键</h2>
<p>注意:这些快捷键默认是使用英文键盘布局,并可能无法正常工作。如果出现问题,请首先尝试在输入手势对话框中更改它们。</p>
<ul>
<li>NVDA +; (分号):根据所选文字提供信息</li>
<li>NVDA + SHIFT +; (分号):提供有关剪贴板上文本的信息</li>
<li>NVDA+control+; (分号):读出最后朗读的信息。按两次使其显示在对话框中。</li>
</ul>
<h2>支持的服务</h2>
<p>目前,支持以下功能:</p>
<ul>
<li>使用IPInfoDB
API的IP地址信息。提供了一个API密钥,但我不保证它会一直有效。您可以生成自己的文件,然后将其输入到<strong>init</strong>.py的顶部,替换原有的文件。</li>
<li>英语字典中的princeton wordnetweb定义。注意:这些定义并不是最好的,数据库缺乏简单单词的定义,例如可以,你等等。</li>
<li>通过谷歌书籍API查找ISBN</li>
<li>信用卡类型验证</li>
</ul>
<p>注意:正则表达式用于验证数据。目前有一些没有使用,电话号码和电子邮件。这可能会在未来发生变化。</p>
<h2>贡献</h2>
<p>关于贡献。您可以提交PR,或者联系以下信息:</p>
<p>twitter:@cartertemm</p>
<p>电子邮件:crtbraille@gmail.com</p>
SentenceNav-句子导航http://addons.nvda-project.org/addons/sentenceNav.zh_CN.html2023-05-10T20:38:33Z2018-01-25T05:02:56Z
<ul>
<li>作者: Tony Malykh</li>
<li>下载<a href="https://www.nvaccess.org/addonStore/legacy?file=sentencenav">稳定版</a>(兼容NVDA 2019.3及以后版本)</li>
</ul>
<p>SentenceNav 是一个 NVDA 的插件,可以让您以句子为单位阅读文本,而不是按段落或单词。</p>
<p>注意,“跳转到下一段文本”的功能已移至 <a href="http://github.com/mltony/nvda-text-nav/">TextNav</a>
插件,需要单独安装。</p>
<h2>按键</h2>
<ul>
<li>Alt+Down:跳转到下一个句子。</li>
<li>Alt+Up:跳转到上一个句子。</li>
<li>NVDA+Alt+S:读出当前句子。</li>
<li>Alt+Windows+Down:跳转到下一个短语。</li>
<li>Alt+Windows+Up:跳转到上一个短语。</li>
</ul>
<p>注意,“跳转到下一段文本”的功能已移至 <a href="http://github.com/mltony/nvda-text-nav/">TextNav</a>
插件,需要单独安装。</p>
<h2>注释和已知问题</h2>
<ul>
<li>句子标记由启发式算法完成,并非 100% 准确。在个别情况下 SentenceNav
可能会出错,例如,对不应该被拆分成两个句子的文本进行了拆分,或者相反而一次性读出了两个句子。</li>
<li>自 2.8 版起添加了对 Microsoft Word 和 WordPad 的实验性支持。</li>
<li>句子导航的快捷键 Alt+Up/Down 可能与某些应用程序中的快捷键冲突。 SentenceNav
开发者尽可能解决这些冲突。但是,如果您遇到这种情况,一个简单的解决方法是按 NVDA+F2(忽略下一次 NVDA 按键),然后按
Alt+Up/Down 以确保把该按键传递给应用程序本身。</li>
</ul>
<h2>算法</h2>
<p>SentenceNav 使用正则表达式来查找句子边界。正则表达式可以查找以下位置:</p>
<ul>
<li>一个或多个“断句”标点符号,例如句号、感叹号或问号,后面紧跟一个或多个空格。</li>
<li>断句后可以选择性跟随一个或多个“可跳过”标点符号,例如右括号或引用。</li>
<li>断句后可以选择性跟随一个维基百科风格的参考,例如[4] 或 [citation needed]。</li>
<li>断句前不得有任何特殊缩写,例如 Dr.、Mr.、Prof. 等。往往特殊缩写取决于特定语言,多数情况下特殊缩写包含句号,但其并不表示句子的结束。</li>
<li>断句前不得包含一个大写字母。这是为了防止因人名的首字母大写而错误的将其拆分为单独的句子,例如 George
R. R. Martin。大写字母列表取决于特定语言。</li>
<li>或者,正则表达式可以匹配全角断句。中文、日文等语言使用全角标点符号,无需句号前后包含特定字符来作为句子的边界。</li>
<li>双换行也算作断句符。</li>
</ul>
<p>短语检测由另一个匹配的正则表达式完成:</p>
<ul>
<li>一个或多个“短语断句”符号后紧跟一个或多个空格。</li>
<li>一个或多个“短语断句”符号后无需跟随空格。</li>
<li>两个换行。</li>
</ul>
<h2>其他设置</h2>
<ul>
<li>跨段落重建句子:一个句子可以跨多个段落。这种情况常见于格式错误的 PDF 文档或以纯文本形式编写的电子邮件中。使用此组合框,您可以告诉
SentenceNav 尝试识别这些句子并正确读出。然而,有时它会错误的将不应该是同一个句子的段落识别为一个句子。在这种情况下,您可以禁用该功能。</li>
<li>在应用程序中禁用句子导航:您可以在某些应用程序中禁用 SentenceNav。例如,某些应用程序使用 Alt+Down
按键来执行其他功能。这是一个逗号分隔的应用程序黑名单,表示句子导航在这些应用程序中将被禁用。如果您不确定应用程序的名称,请切换到该应用程序,按
NVDA+Control+Z 打开 NVDA 控制台并键入:“focus.appModule.appName”(不带引号)以查看当前应用程序的名称。</li>
</ul>
<h2>源代码</h2>
<p>源代码可在 <a href="http://github.com/mltony/nvda-sentence-nav">http://github.com/mltony/nvda-sentence-nav</a> 获取。</p>
<h2>下载</h2>
<ul>
<li>当前稳定版本:<a href="https://github.com/mltony/nvda-sentence-nav/releases/latest/download/SentenceNav.nvda-addon">SentenceNav</a></li>
<li>最后一个 Python 2 版本(与 NVDA 2019.2 及之前版本兼容):<a href="https://github.com/mltony/nvda-sentence-nav/releases/download/v2.5/SentenceNav-2.5.nvda-addon">SentenceNav
v2.5</a></li>
</ul>
BrailleExtender盲文支持插件http://addons.nvda-project.org/addons/brailleExtender.zh_CN.html2024-02-13T14:36:10Z2018-01-03T19:52:47Z
<ul>
<li>Author: André-Abush Clause and contributors</li>
<li>NVDA compatibility: 2019.3 and beyond</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=brlext">稳定版</a></li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=brlext-dev">开发板</a></li>
</ul>
<p>BrailleExtender is an <a href="http://nvda-project.org/">NVDA</a> add-on that provides
various features at braille level. Currently, the following features are
implemented:</p>
<ul>
<li>reload two favorite braille display with shortcuts.</li>
<li>automatic review cursor tethering in terminal role like in PuTTY,
Powershell, bash, cmd.</li>
<li>auto scroll.</li>
<li>switch between several input/output braille tables.</li>
<li>mark the text with special attributes through dot 7, dot 8 or both.</li>
<li>use two output braille tables simultaneously.</li>
<li>display tab signs as spaces.</li>
<li>reverse forward scroll and back scroll buttons.</li>
<li>say the current line during text scrolling either in review mode, or in
focus mode or both.</li>
<li>translate text easily in Unicode braille and vice versa. E.g.: z <--> ⠵.</li>
<li>convert cell description to Unicode braille and vice versa. E.g.: 123 <-->
⠇.</li>
<li>lock braille keyboard.</li>
<li>launch an application/URL with gesture.</li>
<li>braille dictionaries.</li>
<li>type with one-hand from braille keyboard.</li>
<li>display undefined characters from braille tables (including emojis) using
altenative representations.</li>
<li>enter any character from braille keyboard (including emojis).</li>
<li>skip blank lines during text scrolling.</li>
<li>and much more!</li>
</ul>
<p>对于一些盲文显示器,它提供了扩展盲文显示命令:</p>
<ul>
<li>offer complete gesture maps including function keys, multimedia keys,
quick navigation, etc.;</li>
<li>emulate modifier keys, and thus any keyboard shortcut;</li>
<li>offer several keyboard configurations concerning the possibility to input
dots 7 and 8, enter and backspace;</li>
<li>add actions and quick navigation through a rotor.</li>
</ul>
<p>Once the add-on is installed, read the documentation and go through the
settings using the BrailleExtender submenu (located in the NVDA menu).</p>
<h2>Let's explore some common features</h2>
<h3>Representation of undefined characters</h3>
<p>The extension allows you to customize how an undefined character should be
represented within a braille table. To do so, go to the — Representation of
undefined characters — settings. You can choose between the following
representations:</p>
<ul>
<li>Use braille table behavior (no description possible)</li>
<li>Dots 1-8 (⣿)</li>
<li>Dots 1-6 (⠿)</li>
<li>Empty cell (⠀)</li>
<li>Other dot pattern (e.g.: 6-123456)</li>
<li>Question mark (depending on output table)</li>
<li>Other sign/pattern (e.g.: ??)</li>
<li>Hexadecimal</li>
<li>Hexadecimal, HUC8</li>
<li>Hexadecimal, HUC6</li>
<li>Decimal</li>
<li>Octal</li>
<li>Binary</li>
</ul>
<p>You can also combine this option with the “describe the character if
possible” setting.</p>
<p>Notes:</p>
<ul>
<li>To distinguish the undefined set of characters while maximizing space, the
best combination is the usage of the HUC8 representation without checking
the “Show punctuation/symbol name for undefined characters if available”
option.</li>
<li>To learn more about the HUC representation, see
<a href="https://danielmayr.at/huc/">https://danielmayr.at/huc/</a></li>
<li>Keep in mind that definitions in tables and those in your table
dictionaries take precedence over character descriptions, which also take
precedence over the chosen representation for undefined characters.</li>
</ul>
<h3>Getting Current Character Info</h3>
<p>This feature allows you to obtain various information regarding the
character under the cursor using the current input braille table, such as:
the HUC8 and HUC6 representations; the hexadecimal, decimal, octal or binary
values; A description of the character if possible; the Unicode braille
representation and the braille pattern dots.</p>
<p>Pressing the defined gesture associated to this function once shows you the
information in a flash message and a double-press displays the same
information in a virtual NVDA buffer.</p>
<p>On supported displays the defined gesture is ⡉+space. No system gestures are
defined by default.</p>
<p>For example, for the '&' character, we will get the following information:</p>
<blockquote><p>&: 0x26, 38, 0o46, 0b100110<br />
and (AMPERSAND [Po])<br />
⢿ (1234568)<br />
⣥⣺⡧, ⠿⠺⠏⠏</p></blockquote>
<h3>Advanced braille input</h3>
<p>This feature allows you to enter any character from its HUC8 representation
or its hexadecimal/decimal/octal/binary value. Moreover, it allows you to
develop abbreviations. To use this function, enter the advanced input mode
and then enter the desired pattern. Default gestures: NVDA+Windows+i or
⡊+space (on supported displays). Press the same gesture to exit this
mode. Alternatively, an option allows you to automatically exit this mode
after entering a single pattern. If you want to enter a character from its
HUC8 representation, simply enter the HUC8 pattern. Since a HUC8 sequence
must fit on 3 or 4 cells, the interpretation will be performed each time 3
or 4 dot combinations are entered. If you wish to enter a character from its
hexadecimal, decimal, octal or binary value, do the following:</p>
<ol>
<li>Enter ⠼</li>
<li><p>Specify the basis as follows:</p>
<ul>
<li>⠭ or ⠓: for a hexadecimal value</li>
<li>⠙: for a decimal value</li>
<li>⠕: for an octal value</li>
<li>⠃: for a binary value</li>
</ul>
</li>
<li><p>Enter the value of the character according to the previously selected
basis.</p></li>
<li>Press Space to validate.</li>
</ol>
<p>For abbreviations, you must first add them in the dialog box — Advanced
input mode dictionary —. Then, you just have to enter your abbreviation and
press space to expand it. For example, you can define the following
abbreviations: "⠎⠺" with "sandwich", "⠋⠛⠋⠗" to "🇫🇷".</p>
<p>Here are some examples of sequences to be entered for given characters:</p>
<table>
<thead>
<tr>
<th> Character </th>
<th> HUC8 </th>
<th> Hexadecimal </th>
<th> Decimal </th>
<th> Octal </th>
<th> Binary </th>
</tr>
</thead>
<tbody>
<tr>
<td> 👍 (thumbs up) </td>
<td> ⣭⢤⡙ </td>
<td> ⠭1f44d or ⠓1f44d </td>
<td> ⠙128077 </td>
<td> ⠕372115 </td>
<td> ⠃11111010001001101 </td>
</tr>
<tr>
<td> 😀 (grinning face) </td>
<td> ⣭⡤⣺ </td>
<td> ⠭1f600 or ⠓1f600 </td>
<td> ⠙128512 </td>
<td> ⠕373000 </td>
<td> ⠃11111011000000000 </td>
</tr>
<tr>
<td> 🍑 (peach) </td>
<td> ⣭⠤⠕ </td>
<td> ⠭1f351 or ⠓1f351 </td>
<td> ⠙127825 </td>
<td> ⠕371521 </td>
<td> ⠃11111001101010001 </td>
</tr>
<tr>
<td> 🌊 (water wave) </td>
<td> ⣭⠤⠺ </td>
<td> ⠭1f30a or ⠓1f30a </td>
<td> ⠙127754 </td>
<td> ⠕371412 </td>
<td> ⠃11111001100001010 </td>
</tr>
</tbody>
</table>
<p>Note: the HUC6 input is currently not supported.</p>
<h3>One-hand mode</h3>
<p>This feature allows you to compose a cell in several steps. This can be
activated in the general settings of the extension's preferences or on the
fly using NVDA+Windows+h gesture by default (⡂+space on supported
displays). Three input methods are available.</p>
<h4>Method #1: fill a cell in 2 stages on both sides</h4>
<p>With this method, type the left side dots, then the right side dots. If one
side is empty, type the dots correspondig to the opposite side twice, or
type the dots corresponding to the non-empty side in 2 steps.</p>
<p>For example:</p>
<ul>
<li>For ⠛: press dots 1-2 then dots 4-5.</li>
<li>For ⠃: press dots 1-2 then dots 1-2, or dot 1 then dot 2.</li>
<li>For ⠘: press 4-5 then 4-5, or dot 4 then dot 5.</li>
</ul>
<h4>Method #2: fill a cell in two stages on one side (Space = empty side)</h4>
<p>Using this method, you can compose a cell with one hand, regardless of which
side of the Braille keyboard you choose. The first step allows you to enter
dots 1-2-3-7 and the second one 4-5-6-8. If one side is empty, press
space. An empty cell will be obtained by pressing the space key twice.</p>
<p>For example:</p>
<ul>
<li>For ⠛: press dots 1-2 then dots 1-2, or dots 4-5 then dots 4-5.</li>
<li>For ⠃: press dots 1-2 then space, or 4-5 then space.</li>
<li>For ⠘: press space then 1-2, or space then dots 4-5.</li>
</ul>
<h4>Method #3: fill a cell dots by dots (each dot is a toggle, press Space to validate the character)</h4>
<p>In this mode, each dot is a toggle. You must press the space key as soon as
the cell you have entered is the desired one to input the character. Thus,
the more dots are contained in the cell, the more ways you have to enter the
character.</p>
<p>For example, for ⠛, you can compose the cell in the following ways:</p>
<ul>
<li>Dots 1-2, then dots 4-5, then space.</li>
<li>Dots 1-2-3, then dot 3 (to correct), then dots 4-5, then space.</li>
<li>Dot 1, then dots 2-4-5, then space.</li>
<li>Dots 1-2-4, then dot 5, then space.</li>
<li>Dot 2, then dot 1, then dot 5, then dot 4, and then space.</li>
<li>Etc.</li>
</ul>
IndentNav-缩进导航http://addons.nvda-project.org/addons/indentNav.zh_CN.html2024-02-13T14:36:12Z2018-01-03T19:52:47Z
<ul>
<li>作者: Tony Malykh</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=indentnav">稳定版</a></li>
</ul>
<p>此插件允许NVDA用户按缩进级别或行或段落的偏移进行导航。在浏览器中,它允许快速查找与屏幕左边缘具有相同偏移量的段落,例如注释的分层树中的第一级注释。此外,在编辑许多编程语言的源代码时,它允许在相同缩进级别的行之间跳转,以及快速查找具有更大或更小缩进级别的行。</p>
<h2>用于浏览器</h2>
<p>IndentNav可用于从屏幕左边缘偏移导航。特别是,您可以按NVDA + Alt +
DownArrow或UpArrow跳转到具有相同偏移量的下一个或上一个段落。例如,当浏览评论的分层树(例如,在reddit.com上)以在第一级评论之间跳转并跳过所有更高级别的评论时,这可能是有用的。</p>
<p>严格地说,IndentNav可以在任何应用程序中使用,NVDA为其提供树拦截器对象。</p>
<p>快捷键:</p>
<ul>
<li>NVDA + Alt + UpArrow或DownArrow:使用相同的偏移量跳转到上一个或下一个段落。</li>
<li>NVDA + alt + LeftArrow:跳转到上一段,偏移量较小。</li>
<li>NVDA + Alt + RightArrow:跳转到下一段,偏移量更大。</li>
</ul>
<h2>在文本编辑器中的用法</h2>
<p>IndentNav对于编辑许多编程语言的源代码也很有用。像Python这样的语言要求源代码正确缩进,而在许多其他编程语言中强烈建议使用。使用IndentNav,您可以按NVDA
+ Alt + DownArrow或UpArrow跳转到具有相同缩进级别的下一行或上一行。您也可以按NVDA + Alt +
LeftArrow跳转到父线,即具有较低缩进级别的上一行。在Python中,您可以轻松找到当前的函数定义或类定义。您也可以按NVDA + Alt +
RightArrow转到当前行的第一个子节点,即下一行具有更大的缩进级别。</p>
<p>如果您的NVDA设置为将音线缩进表示为音调,则IndentNav将快速播放所有跳过的音调。否则它只会大致表示跳过的行数。</p>
<p>快捷键:</p>
<ul>
<li>NVDA + Alt + UpArrow或DownArrow:跳转到当前不包含块内具有相同缩进级别的上一行或下一行。</li>
<li>NVDA + Alt + Control +
UpArrow或DownArrow:使用相同的缩进级别强制跳转到上一行或下一行。如有必要,此快捷键将跳转到其他缩进块(例如其他Python函数)。</li>
<li>NVDA + alt + LeftArrow:跳转到父级 - 这是具有较小缩进级别的上一行。</li>
<li>NVDA + Alt + RightArrow:跳转到第一个子节点 - 这是在同一缩进块内具有更大缩进级别的下一行。</li>
</ul>
<h2>发布历史记录</h2>
<ul>
<li><a href="https://github.com/mltony/nvda-indent-nav/raw/master/releases/IndentNav-1.2.nvda-addon">版本1.2</a>
<ul>
<li>增加了对国际化的支持.</li>
<li>在源文件中添加了GPL许可证.</li>
<li>小修正.</li>
</ul>
</li>
<li><a href="https://github.com/mltony/nvda-indent-nav/raw/master/releases/IndentNav-1.1.nvda-addon">版本1.1</a>
<ul>
<li>发布初始版本.</li>
</ul>
</li>
</ul>
Mozilla Apps增强http://addons.nvda-project.org/addons/mozillaScripts.zh_CN.html2024-02-13T14:36:02Z2017-12-18T17:28:07Z
<ul>
<li>作者: Javi Dominguez</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=moz">稳定版</a></li>
</ul>
<p>此插件为Mozilla aps提供NVDA增强功能。</p>
<h2>火狐</h2>
<ul>
<li>NVDA + A(桌面)或NVDA + Control + A(笔记本)读取页面地址。如果快速按两次,则将其复制到剪贴板。</li>
<li>NVDA + End(桌面)或NVDA + Shift + End(笔记本)读取状态栏。如果快速按两次,则将其复制到剪贴板。</li>
<li>NVDA + F8显示已打开选项卡的列表。如果快速按两次,则显示工具栏的按钮。</li>
<li>NVDA + Control + N读取最后一个通知,通过快速按两次显示通知的历史记录。</li>
<li>NVDA + F6将焦点定位在文档上。</li>
</ul>
<h2>雷鸟</h2>
<ul>
<li>In a message window:
<ul>
<li>Control+Shift+(1-4) Reads the sender and recipients of the message. If pressed twice quickly, opens the options menu.</li>
<li>Control+Shift+5 Reads the subject of the message.</li>
<li>Control+Shift+6 Reads date of the message.</li>
<li>Control+Shift+A Brings the focus to the list of attachments, if any.
(These scripts are also available in the list of messages if you activate the preview pane.)</li>
</ul>
</li>
<li>In the bar of fast filtering:
<ul>
<li>Press down Arrow to display more options, enter to check/unchek the selected option.</li>
</ul>
</li>
<li>In messages list:
<ul>
<li>If the preview pane is active, press NVDA+downArrow (desktop) or NVDA+A (laptop) to read the message without leaving the list.</li>
<li>Control+NVDA+1-9 moves between columns.</li>
<li>NVDA+H Displays a dialog in which you can change the order of the columns in the message list.</li>
</ul>
</li>
</ul>
<p>当Firefox或Thunderbird打开时,可以在NVDA首选项>输入手势中自定义快捷键。</p>
sayCurrentKeyboardLanguage-NVDA语言显示插件http://addons.nvda-project.org/addons/sayCurrentKeyboardLanguage.zh_CN.html2024-03-26T20:46:20Z2017-07-09T06:29:40Z
<ul>
<li>Author(s): Abdel, Noelia.</li>
</ul>
<h1>介绍</h1>
<p>此加载项是根据 nvda-addons 邮件列表中的成员的请求创建的。</p>
<p>It provides a script without gesture, which allows to retrieve and give the
language of the current keyboard.</p>
<p>如果按两次, 则提供系统的默认语言。</p>
<p>在这个模块的第一个版本中,它被建议作为简单的globalPlugin粘贴到NVDA的配置目录中,然后将其转换为插件。</p>
<h2>注意</h2>
<p>To set a gesture to the script giving the keyboard language, follow these
steps:</p>
<ul>
<li>Open the NVDA's menu, with "NVDA + N";</li>
<li>Go to NVDA's preferences menu;</li>
<li>Then go to the submenu "Input gestures".</li>
<li>Then select the category "Input", and open it with right arrow.</li>
<li>Go to the item labeled "Gives the language of the keyboard in use, if
pressed twice, give the default language of the system";</li>
<li>Once done, press Alt + A to add a gesture, and type "NVDA + F4" or another
gesture of your choice;</li>
<li>This done, press the up arrow once, you hear "your chosen gesture, all
layout";</li>
<li>Validate on enter, then tab to OK then enter;</li>
<li>Your chosen gesture should then call the script giving keyboard language.</li>
</ul>
<h2>兼容性</h2>
<ul>
<li>This add-on is compatible with the versions of NVDA ranging from 2019.3
and beyond.</li>
</ul>
<h2>Changes for 20240326.0.0</h2>
<ul>
<li>Updated compatibility for nvda-2024.1.;</li>
<li>Deleted download link from readme, the download link for future updates
will now only be available from the add-on store.</li>
</ul>
<h2>Changes for 20231229.0.0</h2>
<ul>
<li>Added a backward compatible implementation to support speak on demand
mode, which will soon be available with nvda-2024.1.</li>
</ul>
<h2>Changes for 20230729.0.0</h2>
<ul>
<li>Applied the flake8 and mypy rules to the code;</li>
<li>Changed the minimum supported NVDA version to 2019.3 to support
annotations introduced in Python 3.</li>
<li>Removed the "NVDA + F4" gesture calling the script giving the keyboard
language., to allow users to choose their preferred gesture.</li>
</ul>
<h2>Changes for version 20230426.0.0 and beyond</h2>
<ul>
<li>Changed version number, minimum NVDA version and download link according
to store conventions/requirements.</li>
</ul>
<h2>19.02版的更改</h2>
<ul>
<li>现在使用YY.MM形式的版本号(年份为2位数,后跟一个点,后跟月份为2位数);</li>
<li>Added compatibility with the new versioning format of add-on, appeared
since nvda 2019.1.</li>
</ul>
<h2>版本1.1</h2>
<ul>
<li>插件已从getCurKeyboardLanguage重命名为sayCurrentKeyboardLanguage;</li>
<li>在插件中添加了GPL许可证;</li>
<li>将脚本getCurKeyboardLanguage添加到“系统状态”类别;</li>
<li>修复了代码中的一些错误。</li>
</ul>
<h2>版本1.0</h2>
<ul>
<li>发布初始版本。</li>
</ul>
NVDA插件论坛现在已迁移到Groups.IOhttp://addons.nvda-project.org/addons/groupsio.zh_CN.html2023-05-10T20:38:33Z2017-06-11T18:40:20Z
<p>自2013年5月起,Freelists一直成在着NVDA Add-ons
Central邮件列表,一直到现在。但是,由于众多问题,现在决定将邮件讨论组移至Groups.IO。因此,从2017年7月1日起,官方插件列表地址为:</p>
<ul>
<li>邮件列表网站: https://nvda-addons.groups.io/g/nvda-addons</li>
<li>订阅邮件列表可以: 发送空白电子邮件至: nvda-addons+subscribe@groups.io</li>
</ul>
<p>旧的列表名单现已弃用。谢谢。</p>
对象位置音调http://addons.nvda-project.org/addons/objLocationTones.zh_CN.html2023-05-25T07:07:11Z2017-05-28T18:03:20Z
<ul>
<li>作者: Joseph Lee</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=objLocTones">稳定版</a></li>
<li>NVDA compatibility: 2022.4 and later</li>
<li>Note: this add-on is no longer actively maintained since 2021.</li>
</ul>
<p>安装此插件并重新启动NVDA(或启用此插件)后,当您导航到不同的控件时,您将听到音调以指示对象在屏幕上的位置。要关闭对象位置音,请从插件管理器卸载或禁用此插件。</p>
<p>重要注意事项:</p>
<ul>
<li>如果使用音频主题或类似的插件,建议禁用对象位置音调插件。</li>
<li>如果控件在屏幕外,则不会播放音调。</li>
</ul>
BGT游戏睡眠http://addons.nvda-project.org/addons/bgtLullaby.zh_CN.html2023-05-10T20:38:33Z2017-05-26T23:23:35Z
<ul>
<li>作者: Damien Sykes-Lindley</li>
<li>下载<a href="https://addons.nvda-project.org/files/get.php?file=bgt">开发板</a></li>
</ul>
<p>此插件主要支持NVDA在运行BGT游戏时自动进入睡眠的功能。</p>
<p>当然,游戏发送给NVDA的任何语音仍然会被朗读,包括对话框,输入的文本消息。</p>
增强aria“http://addons.nvda-project.org/addons/enhancedAria.zh_CN.html2023-05-10T20:38:33Z2017-05-21T02:11:59Z
<ul>
<li>作者: Jose Manuel Delicado</li>
<li>旧版插件:NVDA 2019.3和更高版本现在可以在网上阅读文章</li>
<li>NVDA兼容版本: 2017.4至2019.2</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=earia">稳定版</a></li>
</ul>
<p>此插件允许您在浏览Internet时自定义NVDA报告哪些Aria地标。</p>
<p>它的功能非常简单。安装后,打开浏览器并照常浏览网页。 Firefox和Chrome报告的默认aria地标也会在Internet
Explorer中显示,因此您可以按快速导航键在它们之间跳转,并在所有浏览器中按NVDA + f7列出它们。请阅读NVDA用户指南了解更多信息。</p>
<p>插件增加了NVDA中默认不包含的额外路标,文章(缩写为盲文作为艺术)。</p>
<h2>配置</h2>
<p>您可以通过转到NVDA,首选项,增强型Aria设置或NVDA选项对话框中的相应类别来启用或禁用地标。该对话框有一个每个地标的复选框。如果禁用地标,则在浏览网页时无法按d键跳转到该地标,NVDA将不会朗读。</p>
<h2>联系信息</h2>
<p>这个插件由Jose Manuel
Delicado开发。如果您想与我联系,请发送电子邮件至jm.delicado@nvda.es,或通过https://github.com/jmdaweb/enhancedAria在GitHub上提交问题</p>
<h2>更新日志</h2>
<h3>版本2.8</h3>
<ul>
<li>新的更新和翻译。</li>
<li>更新NVDA兼容性标志。</li>
</ul>
<h3>版本2.7</h3>
<ul>
<li>更新了最新NVDA版本的兼容性标志。</li>
<li>新的更新和翻译。</li>
</ul>
<h3>版本2.6</h3>
<ul>
<li>更新了最新NVDA版本的兼容性标志。此版本仅与NVDA 2017.4及更高版本兼容。</li>
<li>新的更新和翻译。</li>
<li>现在,在切换NVDA配置文件并将设置恢复为默认设置后,将自动应用配置。</li>
</ul>
<h3>版本2.5</h3>
<ul>
<li>更新了最新NVDA版本的兼容性标志。</li>
</ul>
<h3>版本2.4</h3>
<ul>
<li>现在,仅在卸载插件时才会删除设置。升级时,配置不再重置。</li>
<li>新的更新和翻译。</li>
</ul>
<h3>版本2.3</h3>
<ul>
<li>新增与最近NVDA版本的兼容性。</li>
<li>新的翻译。</li>
</ul>
<h3>版本2.2</h3>
<ul>
<li>修复了使用盲文显示器并将文章角色配置为报告时的致命错误。</li>
</ul>
<h3>版本2.1</h3>
<ul>
<li>稳定性改进</li>
</ul>
<h3>版本2.0</h3>
<ul>
<li>增加了对NVDA 2018.2及更高版本上可用的多分类设置对话框的支持</li>
<li>增加了Python 3的兼容性</li>
<li>现在,guiHelper模块用于创建插件界面</li>
</ul>
<h3>版本1.3</h3>
<ul>
<li>增加了用于插件设置的configobj规范</li>
</ul>
<h3>版本1.2</h3>
<ul>
<li>错误修复</li>
</ul>
<h3>版本1.1</h3>
<ul>
<li>修复了在恢复到NVDA保存配置时阻止打开插件设置对话框的问题</li>
</ul>
Lambda 增强插件(英语)http://addons.nvda-project.org/addons/lambda.zh_CN.html2024-02-13T14:36:25Z2017-05-19T19:04:32Z
<ul>
<li>作者: Alberto Zanella and the lambda-nvda team.</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=lambda">稳定版</a></li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=lambda-dev">开发版</a></li>
</ul>
<p>This project is an appModule for the LAMBDA Software. It has been inspired by the work of Peter Lecky at the Comenius University.
LAMBDA (Linear Access to Mathematic for Braille Device and Audio-synthesis) is a software that helps blind people to read and write math using a braille display and/or a speech synthesizer.
LAMBDA is the result of an EU-Project. For more information about LAMBDA please visit <a href="https://www.lambdaproject.org/">https://www.lambdaproject.org/</a>.<br />
The current version of the addon has braille tables for Italian and Spanish
languages and its interface is available in most of the NVDA's official
languages, because it is translated by the NVDA translations community. If
you are a non-italian user of LAMBDA and you would like to contribute with
the porting of the braille table in your language, feel free to contact the
author (see below) or subscribe the project mailing list.</p>
<p><strong>Please note:</strong> This addon has been developed by Alberto Zanella as a voluntary activity. Nor the author or the contributors are involved in selling and / or development of the software Lambda. If you need more information about Lambda, or you need support on how to use it, please contact your local distributor. If you are encountering any difficulties when using or installing this addon, please contact the author or use the "Issues" link on the Github project page.</p>
<h3><a href="https://github.com/lambda-nvda/lambdaNvda/">Official Github Repository</a></h3>
<h2>Addon Features:</h2>
<h3>Speech support:</h3>
<ul>
<li>Dialogs and menus are properly reported;</li>
<li>Natural speech support for math formulas using the Lambda math engine,
i.e. "compound root 3 sep compound root 3 x plus 24, close compound root,
minus 3 equals 0";</li>
<li>implemented the Reading by character, words, lines and Say All;</li>
<li>Speaks when a block of text is selected or extended (using CTRL+B and
SHIFT+CTRL+B);</li>
<li>Speaks when moving in the text editor using standard Windows commands and
Lambda-specific commands;</li>
<li>Both Extended and Short speech modes are supported (you can select it
using the Tools menu in Lambda);</li>
<li>Special dialogs like structure mode, calculator, and matrix window are now
correctly reported and NVDA reads correctly when moving the cursor around
or when new text is typed ;</li>
<li>Typing echo uses the Lambda text processor, so symbols and markers will be
correctly reported.</li>
</ul>
<h3>Braille support:</h3>
<ul>
<li>The addon installs (inside the user profile directory) and activates a
custom braille table. This table may be different for different
languages. Custom braille tables were made from ones in the Lambda plugin
for JAWS (jbt file). Then symbols and markers are represented using the
same dots patterns;</li>
<li>The addon creates an NVDA profile for a standard braille configuration. By
this, the output is set to the custom braille table only when the Lambda
application is active;</li>
<li>Dialogs and menus are properly reported in braille;</li>
<li>The content of the editor is correctly rendered in braille and the user is
able to move using braille scrolling keys or cursor routing keys;</li>
<li>Starting from the addon version 1.1.0, there are two ways in which the
text in the Lambda editor is rendered: "Flat mode" and "non-Flat
Mode". When the "Flat mode" is on, NVDA will use the Display Model to
retrieve information from the editor and to determine the caret
position. This is specially beneficial when the user needs to move around
on the screen, even in white spaces. When the "Flat Mode" is set to "off",
text rendering on the braille display is more stable, since NVDA uses
Windows API to retrieve it. However when the the caret is moved in white
spaces next to the end of the line of text, the braille display does not
follow the real cursor as long as a non-white space is added by the user.</li>
</ul>
<p>The "flat mode" is active by default. You can toggle "flat mode" on or off
by pressing NVDA+SHIFT+F.</p>
<p>We strongly recommend to disable the Flat Mode if you are using custom DPI
in Windows (Custom sizing option), especially when you have screen settings
with more than 96 dpi (larger than 100%).</p>
<ul>
<li>The structure of dialog boxes is easier, repeated information has been
removed;</li>
<li>The selection will be marked properly using dots 7 and 8, and marking is
properly refreshed while standard Windows commands (SHIFT+ARROWS) or
Lambda specific commands (CTRL+B, CTRL+SHIFT+B) are pressed.</li>
</ul>
<h2>Before starting to use this addon.</h2>
<p>This addon creates an NVDA profile named "lambda" which is associated with
the "lambda.exe" application. The profile automatically sets all braille
options: the custom braille table, the focus tethering and flat mode
settings.</p>
<p>If a previous profile with the same name is present in your system, the
addon will not override it and you have to manually adjust your
configuration profile.</p>
<p>To stave off this situation, if you have specific settings you'd like to
preserve, you can use the "Revert LAMBDA Profile Wizard". The shortcut to
start this tool is NVDA+alt+r (when focused in LAMBDA).</p>
<p>An easy option is also to delete old versions of the "lambda" profile after
the installation of the addon. To do so, open the NVDA menu, select the
"Configuration profiles" menu Item and press ENTER.</p>
<p>In the Configuration profiles dialog, you'll be able to locate and delete
the "lambda" profile. The profile will be re-created the next time the
Lambda application is started.</p>
<p>Deleting the "lambda" profile should be an easy solution also when the addon
runs into any problem. For instance, if the braille table is not properly
set, instead of manually configuring the profile, you can simply delete
it. The addon will create a new one the next time you'll load the Lambda
editor.</p>
<p>Each time the Lambda editor is started, this addon checks if a profile with
the name "lambda" exists. If it doesn't, it automatically generates a
profile with the following form:</p>
<pre><code>filename : userData\profiles\lambda.ini :
[braille]
readByParagraph = False
tetherTo = focus
translationTable = path-to-the-addon-brailleTable-dir\tableName
[lambda]
brailleFlatMode = True
</code></pre>
<p>Where :</p>
<ul>
<li>path-to-the-addon-brailleTable-dir : is the absolute path of the addon
directory + "\brailleTables"</li>
<li>tableName : depends on the active NVDA language. Currently only the
italian and Spanish braille tables, "lambda-ita.utb" and "lambda-esp.utb"
respectively, is present.</li>
</ul>
<h2>Addon Keyboard Shortcuts:</h2>
<ul>
<li><strong>NVDA+Shift+f</strong>: Toggle braille flat mode on or off;</li>
<li><strong>NVDA+alt+r</strong>: Open the "Revert LAMBDA Profile Wizard";</li>
<li><strong>NVDA+d</strong>: Duplicate lines (use this instad of control+d).</li>
</ul>
<h2>Known issues:</h2>
<p>Due to a bug present in LAMBDA, the add-on provides an extra-logic that
reports white spaces. This logic may fail in the following situations:</p>
<ul>
<li>When words like "space", "spazio" "Espacio" etc. are inserted into the
text, they may be reported by NVDA as the local NVDA language translation.</li>
<li>Blank lines are not reported by the LAMBDA speech engine. The user will
hear the translation of the word "space" instead. This could be both a
blank line or a line containing only the word "space".</li>
</ul>
<h2>Useful tips</h2>
<p>This is a set of tips that will help you on using the addon in a more
eficient way.</p>
<ul>
<li>Character-by-character reporting: Normally, when working with maths you
would like NVDA to report things you're writing character by character. To
do this, there are a couple of simple steps: ensure to have the focus on
the LAMBDA's window or one of its variants (the six dots representation,
for example); press NVDA+2 (number two) or navigate to NVDA
menu>Preferences>Keyboard settings and check the box to Speak typed
characters; go to LAMBDA>Options>Voice paramethers and ensure the checkbox
"echo" is ON, otherwhise NVDA won't receive anything from the speech
engine while you are typing. And done, NVDA will speak written characters,
but don't worry, only in LAMBDA or its special windows, the settings for
the rest of applications will be left as they were.</li>
</ul>
<h2>Addon mailing list:</h2>
<p>To report bugs, suggestions or if you want to contribute you can subscribe
the Addon Group (in English). You can subscribe from the website:
<a href="https://groups.io/g/lambda-nvda">https://groups.io/g/lambda-nvda</a>.</p>
<h2>Change log</h2>
<p>Below is a list of changes between the different add-on versions. Next to
the version number, between parentheses, is the development status. The
current development release isn't included as it could have changes until it
is flagged as stable or discarded as candidate.</p>
<h3>Version 1.3.0 (stable)</h3>
<ul>
<li>Support for newer version of NVDA (Support for Python 3)</li>
<li>Solved an issue while pressing duplicate line command NVDA+d in a blank
line caused clipboard content to be pasted. Now when you press NVDA+d and
you are in a blank line, a new blank line appears as expected.</li>
</ul>
<h3>Version 1.2.2 (stable)</h3>
<ul>
<li>Improved compatibility with WX Python version 4 (introduced with NVDA
2018.3). Warning related with wx.NewId() is no longer displayed in debug
log.</li>
<li>Implemented guiHelper to enhance dialogs's appearance.</li>
<li>New languages. Updated translations.</li>
</ul>
<h3>Version 1.2.1a (stable)</h3>
<p>This update is intended to be a long-term support release. It means that
until, at least, june 2018, it won't be released a version as stable as
this. We do it to provide students maximum stability and to minimize the
changes during the academical year.</p>
<ul>
<li>New languages. Updated translations.</li>
</ul>
<h3>Version 1.2.1 (stable)</h3>
<ul>
<li>Added compatibility with the way that NVDA 2017.3 uses to manage
braille. Backwards compatibility kept.</li>
<li>fixed many braille issues.</li>
</ul>
<h3>Version 1.2.0 (development)</h3>
<p>This version was not published as stable because the version 1.2.1 included
major fixes.</p>
<ul>
<li>New locales. Updated localizations.</li>
</ul>
<h3>Version 1.1.8 (stable)</h3>
<ul>
<li>Initial stable release.</li>
</ul>
朗读历史http://addons.nvda-project.org/addons/speech_history.zh_CN.html2024-02-13T14:38:20Z2017-05-16T14:06:26Z
<ul>
<li>作者: James Scholes</li>
<li>下载 <a href="https://is.gd/speechHistory2023_1">稳定版</a></li>
</ul>
<p>An updated version of the Clip Copy add-on, initially created by Tyler
Spivey. The add-on allows you to review the most recent 100 items spoken by
NVDA, as well as copy the selected item to the clipboard. By default, use
Shift+F11 to move back through the history, Shift+F12 to move forwards and
F12 on its own to copy the selected item. These hotkeys can be updated from
within the Speech category of NVDA's Input gestures dialog.</p>
密码朗读器http://addons.nvda-project.org/addons/speakPasswords.zh_CN.html2023-05-10T20:38:33Z2017-05-03T02:11:11Z
<ul>
<li>作者: Tyler Spivey</li>
<li>NVDA兼容版本: 2019.3</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=spp">稳定版</a></li>
</ul>
<p>此插件允许NVDA在输入密码字段时读出输入的字符和单词,但密码字段中的导航保持不变。</p>
<h2>用法</h2>
<p>安装此插件时会自动读出密码,由“读出输入字符”和“读出输入单词”选项控制。</p>
<p>要停止读出密码,请禁用“读出输入字符”和“读出输入单词”选项,或禁用、卸载插件。</p>
Clipspeak剪贴板插件http://addons.nvda-project.org/addons/clipspeak.zh_CN.html2024-02-13T14:37:44Z2017-05-02T03:33:48Z
<h2>Informations</h2>
<ul>
<li>Authors: "Rui Fontes, Ângelo Abrantes, Abel Passos Júnior and colaboration
of Noelia Ruiz Martínez, based on the work of Damien Sykes-Lindley</li>
<li>Updated in 10/04/2022</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=clipspeak">stable version</a></li>
<li>Compatibility: NVDA version 2019.3 and beyond</li>
</ul>
<h2>Presentation</h2>
<p>Clipspeak is an addon that allows NVDA to automatically announce clipboard
operations (such as cut, copy and paste), along with other common editing
operations such as undo and redo.</p>
<p>In order to prevent announcement in inappropriate situations, Clipspeak
performs checks on the control and the clipboard in order to make an
informed decision as to whether such an announcement is necessary.</p>
<p>You can choose between only announcing copy/cut/paste or also whats is being
copied/cutted/pasted on NVDA, configurations, clipspeak.</p>
<p>By default, Clipspeak's gestures are mapped to those commonly used by
English versions of Windows:</p>
<ul>
<li>CTRL + Z:撤消</li>
<li>CTRL + Y:重做</li>
<li>CTRL + X:剪切</li>
<li>CTRL + C:复制</li>
<li>CTRL + V:粘贴</li>
</ul>
<p>If these are not the shortcuts commonly used for these tasks on your version
of Windows, you will need to remap these gestures in the input gestures
configuration under the Clipboard category.</p>
<h2>Automatic update</h2>
<p>This add-on includes an automatic update feature. The check for a new
version will be executed everytime NVDA is loaded. If you want this, go to
NVDA, Preferences, Options and in the add-on category check the check box.</p>
浏览光标复制器http://addons.nvda-project.org/addons/reviewCursorCopier.zh_CN.html2023-05-10T20:38:33Z2017-04-19T18:32:49Z
<ul>
<li>作者: Tuukka Ojala <a href="mailto:tuukka.ojala@iki.fi">tuukka.ojala@iki.fi</a></li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=reviewCursorCopier">稳定版</a></li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=rccp-dev">开发板</a></li>
</ul>
<p>此NVDA插件提供各种快捷键,用于将浏览光标下的文本复制到剪贴板。目前,实现了以下功能:</p>
<ul>
<li>复制浏览光标下的行</li>
<li>复制浏览光标下的单词</li>
<li>从当前行的开头复制到浏览光标</li>
<li>从浏览光标复制到当前行的末尾</li>
<li>从当前单词的开头复制到浏览光标</li>
<li>从浏览光标复制到当前单词的末尾</li>
</ul>
<p>默认情况下,这些快捷键都没有进行设置。请使用NVDA设置菜单下的输入手势对话框进行设置。此插件提供的所有快捷键都可以在“文本查看”类别下找到。有关设置和修改输入手势的更多信息,请参阅NVDA用户指南。</p>
<h2>许可证</h2>
<p>此插件按照GNU通用公共许可证第2版进行分发。</p>
经典选择http://addons.nvda-project.org/addons/classicSelection.zh_CN.html2023-05-10T20:38:33Z2016-12-24T18:55:43Z
<ul>
<li>作者: Tyler Spivey</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=clsel">稳定版</a></li>
</ul>
<p>此插件可恢复NVDA 2016.3中引入的NVDA + f9和NVDA + f10的操作。</p>
<p>旧的操作会在第一次按下NVDA +
f10时将选择复制到剪贴板,而新的选择会在第一次按下时选择并在第二次时复制。新的操作有一些缺点。如果没有被选择(并且因此移动光标),则文本不能被复制,在可用的情况下。对于不是的地方(例如控制台),它增加了额外的NVDA
+ f10。</p>
<p>该插件在经典选择类别下添加了两个新快捷键,用于开始和结束选择,默认情况下绑定到NVDA + f9和NVDA + f10。</p>
Mush Client聊天支持插件http://addons.nvda-project.org/addons/mushClient.zh_CN.html2023-05-10T20:38:33Z2016-11-18T15:13:31Z
<ul>
<li>作者: Nick Stockton</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=mush">开发板</a></li>
</ul>
<p>此插件增强了NVDA使用mushClient的可访问性。</p>
<p>插件说明</p>
<p>此插件为Mush客户端提供以下可访问性改进:</p>
<ol>
<li>现在,NVDA导航器对象自动设置为Mush Client的输出窗口,以便更方便地查看消息。</li>
<li>两个新的热键(NVDA-8和NVDA-9)分别切换“键入字符的语音中断”和“输入键的语音中断”设置。</li>
<li>此外,NVDA-Enter和numbpad-Enter会将NVDA导航器对象的位置设置为输出窗口中的最后一行文本并读出来。</li>
<li>当Mush
Client窗口失去焦点并恢复时,“报告动态内容更改”,“插入符移动查看光标”,“键入字符的语音中断”和“输入键的语音中断”设置现在自动保存到单独的配置文件中当它再次获得焦点时。</li>
</ol>
<p>注意:由于大多数人将使用带有语音插件的Mush
Client来自动读出传入文本,因此默认情况下禁用NVDA的“报告动态内容更改”设置以避免两次读出传入行。如果要通过NVDA打开自动读出的输入线路,请使用NVDA-5热键切换此设置。</p>
mIRC-NVDA支持插件http://addons.nvda-project.org/addons/mirc.zh_CN.html2023-05-10T20:38:33Z2016-11-18T15:13:30Z
<ul>
<li>作者: Nick Stockton</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=mirc">开发板</a></li>
</ul>
<p>这是NVDA附带的mIRC app模块的增强版本。</p>
<p>插件说明:</p>
<p>此插件是NVDA中包含的mIRC应用程序模块的增强版本。</p>
<ol>
<li>现在,NVDA导航器对象自动设置为mIRC的输出窗口,以便更轻松地查看输出。</li>
<li>两个新的热键(NVDA-8和NVDA-9)分别切换“键入字符的语音中断”和“输入键的语音中断”设置。</li>
<li>此外,NVDA-Enter和numbpad-Enter会将NVDA导航器对象的位置设置为输出窗口中的最后一行文本并说出来。</li>
<li>当mIRC窗口失去焦点并恢复时,“报告动态内容更改”,“插入符移动查看光标”,“键入字符的语音中断”和“输入键的语音中断”设置现在自动保存到特殊配置文件中它再次得到关注。</li>
</ol>
<p>注意:默认情况下启用NVDA的“报告动态内容更改”设置。如果您使用mIRC的语音系统(如Talking IRC或mIRC With
Speech),请使用NVDA-5热键关闭此设置,以防止传入的线路被读两次。</p>
病毒插件-Blind Extrahttp://addons.nvda-project.org/addons/blindExtra.zh_CN.html2023-05-10T20:38:33Z2016-11-11T19:48:44Z
<ul>
<li>作者: Ahmed Star</li>
</ul>
<p>此插件声称可以访问某些额外的软件。</p>
<p>2016年11月,由于以下原因,此插件被NVDA插件成员标记为远程访问特洛伊木马(远程访问另一台计算机并且在用户不知情的情况下会损坏文件):</p>
<ul>
<li>使用此插件一段时间后重命名文件,用户不会注意到它。</li>
<li>远程访问,包括发送Skype消息。</li>
</ul>
<p>注意:此插件从未托管在社区插件网站上。</p>
<p>插件社区敦促NVDA用户卸载此插件,并运行防病毒程序,以及在此计算机上有敏感信息时格式化磁盘。插件社区还希望提醒用户在从不受信任的来源安装插件时要小心,因为NVDA插件可以执行各种操作,包括访问文件系统和Internet。
NVDA插件是功能强大的程序,可以做出惊人的事情,但必须小心对待。 Add-ons社区不会检查不是来自此站点的插件。谢谢。</p>
ObjPad-NVDA简易导航器http://addons.nvda-project.org/addons/objPad.zh_CN.html2023-05-10T20:38:33Z2016-09-26T17:11:24Z
<ul>
<li>Author: Christopher Duffley <a href="mailto:nvda@chrisduffley.com">nvda@chrisduffley.com</a>, originally by Joseph
Lee, Cleverson Uliana and others</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=objPad">稳定版</a></li>
<li>NVDA 兼容性:2022.4 及更高版本</li>
</ul>
<p>此插件提供了一组快捷键来处理屏幕上的对象,包括导航和其他可能性。</p>
<h2>快捷键</h2>
<ul>
<li>Control + NVDA + TAB 切换以下模式(详见下文)。</li>
</ul>
<h2>光标键模式</h2>
<p>插件提供了四种使用光标键的方式:</p>
<ul>
<li>经典(或普通模式):使用光标键移动光标。</li>
<li>对象导航:使用光标键移动到下一个/上一个/父/第一个子对象。</li>
<li>网页模式:使用光标键循环切换元素类型并在相应元素之间移动。</li>
<li>扫描模式:使用光标键在屏幕上移动对象,而忽略层次结构。</li>
</ul>
<p>光标键设置为对象导航模式时,有以下快捷键可用:</p>
<ul>
<li>右光标:下一个对象。</li>
<li>左光标:上一个对象。</li>
<li>上光标:父对象。</li>
<li>下光标:第一个子对象。</li>
<li>空格或回车:激活。</li>
</ul>
<p>光标键设置为网页模式时(元素正常或按对象,链接,表单字段,标题,框架,表格,列表,地标移动):</p>
<ul>
<li>右光标:下一个元素。</li>
<li>左光标:上一个元素。</li>
<li>上光标:上一个元素类型。</li>
<li>下光标:下一个元素类型。</li>
<li>空格或回车:激活。</li>
</ul>
<p>方向键设置为扫描模式时:</p>
<ul>
<li>下光标:下一个对象或下一行。</li>
<li>上光标:上一个对象或上一行。</li>
<li>右光标:查看下一个字符。</li>
<li>左光标:查看上一个字符。</li>
<li>Ctrl + 右光标: 下一个单词。</li>
<li>Ctrl+左光标: 上一个单词。</li>
<li>空格或回车:激活。</li>
</ul>
<h2>Version 23.05</h2>
<ul>
<li>To reflect the maintainer change, the manifest has been updated to
indicate as such.</li>
</ul>
<h2>版本 23.02</h2>
<ul>
<li>需要 NVDA 2022.4 或更高版本。</li>
<li>需要 Windows 10 21H2(2021 年 11 月更新/内部版本 19044)或更高版本。</li>
</ul>
<h2>版本 23.01</h2>
<ul>
<li>需要 NVDA 2022.3 或更高版本。</li>
<li>需要 Windows 10 或更高版本,因为自 2023 年 1 月起,Microsoft 不再支持 Windows 7、8 和 8.1。</li>
</ul>
<h2>版本 22.06</h2>
<ul>
<li>需要 NVDA 2021.3 或更高版本。</li>
</ul>
<h2>版本21.04</h2>
<ul>
<li>需要 NVDA 2020.1 或更高版本。</li>
</ul>
<h2>版本20.01</h2>
<ul>
<li>需要NVDA 2019.3或更高版本。</li>
</ul>
<h2>版本18.12</h2>
<ul>
<li>内部更改以支持 NVDA 后续的新版本。</li>
</ul>
<h2>版本18.09</h2>
<ul>
<li>添加本地化。</li>
<li>回车键(大键盘和小键盘上的两个回车键)都可用于激活对象。</li>
</ul>
<h2>版本18.03</h2>
<ul>
<li>更好地兼容 NVDA 2018.1。</li>
</ul>
<h2>版本16.12</h2>
<ul>
<li>添加了网页模式。</li>
</ul>
<h2>版本16.10</h2>
<ul>
<li>发布初始版本。</li>
</ul>
Visual Studio支持插件http://addons.nvda-project.org/addons/visualStudio.zh_CN.html2023-05-10T20:38:33Z2016-09-16T15:59:05Z
<ul>
<li>作者: Mohammad Suliman</li>
</ul>
<p>此附加软件为Microsoft Visual Studio 2010及更高版本提供了辅助功能增强的支持。有关此插件的更多信息,请访问<a href="https://github.com/mohammad-suliman/visualstudioaddon">add-on
homepage。</a></p>
Switch synth -NVDA语音合成器切换插件http://addons.nvda-project.org/addons/switchSynth.zh_CN.html2023-05-10T20:38:33Z2016-07-29T20:06:55Z
<ul>
<li>作者: Tyler Spivey</li>
<li>下载: <a href="https://www.nvaccess.org/addonStore/legacy?file=switchSynth">version 1.02</a></li>
</ul>
<h1>切换合成器</h1>
<p>这个插件可以通过热键轻松切换合成器。它是我早期的switch_synth插件的改进版本,带有下划线,必须卸载。任何预先存在的合成器配置将继续使用此版本。</p>
<p>有6个合成器插槽,1到6.默认情况下,它们是空的。通过按下+ shift + NVDA + 1到控制+ shift + NVDA +
6可以切换插槽。切换到插槽后,如果存在,则会加载其合成器和设置。要将当前合成器及其设置保存到当前活动的插槽,请按control + shift +
NVDA + v。</p>
读出符号http://addons.nvda-project.org/addons/reportSymbols.zh_CN.html2024-03-10T18:25:01Z2016-07-28T15:07:21Z
<ul>
<li>Author: Noelia Ruiz Martínez.</li>
</ul>
<p>即使 NVDA 的“读出输入字符”功能已关闭,该插件也可以读出键入的符号(非字母数字或空白字符)。</p>
<p>该插件基于由同一作者开发的旧版 ReportSymbols 插件升级而来。在使用该版本之前您应该先卸载旧版本。</p>
<h2>首选项菜单</h2>
<ul>
<li>读出符号设置:用于设置读出符号的首选项。</li>
</ul>
<p>注意:可以在 NVDA 菜单、选项子菜单、按键与手势对话框的配置类别下分配一个打开此设置的快捷键。</p>
<h2>Changes for 8.0</h2>
<ul>
<li>Compatible with NVDA 2023.1.</li>
</ul>
<h2>7.0 的变化</h2>
<ul>
<li>与 NVDA 2022.1 兼容。</li>
</ul>
<h2>6.0 的变化</h2>
<ul>
<li>与 NVDA 2021.1 兼容。</li>
</ul>
<h2>5.0 的变化</h2>
<ul>
<li>需要 NVDA 2019.3 或更高版本。</li>
</ul>
<h2>4.0 的变化</h2>
<ul>
<li>插件设置放置在 NVDA 设置面板的类别中。</li>
<li>需要 NVDA 2018.2 或更高版本。</li>
<li>如果需要,您可以下载<a href="https://www.nvaccess.org/addonStore/legacy?file=rsy-o">与 NVDA 2017.3 兼容的最新版本</a>。</li>
</ul>
<h2>3.0 的变化</h2>
<ul>
<li>添加了用于读出空格、回车符和其他空白字符的复选框。</li>
</ul>
<h2>2.0 的变化</h2>
<ul>
<li>改进了对话框的视觉效果,遵循 NVDA 对话框的统一外观。</li>
<li>需要 NVDA 2016.4 或更高版本。</li>
</ul>
<h2>1.0 的变化</h2>
<ul>
<li>初始版本。</li>
</ul>
StationPlaylist 增强插件(英语)http://addons.nvda-project.org/addons/stationPlaylist.zh_CN.html2024-03-20T16:04:12Z2016-07-26T17:42:18Z
<ul>
<li>Authors: Christopher Duffley <a href="mailto:nvda@chrisduffley.com">nvda@chrisduffley.com</a> (formerly Joseph Lee
<a href="mailto:joseph.lee22590@gmail.com">joseph.lee22590@gmail.com</a>, originally by Geoff Shang and other
contributors)</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=stationPlaylist">稳定版</a></li>
<li>NVDA compatibility: 2023.3.3 and later</li>
</ul>
<p>This add-on package provides improved usage of StationPlaylist Studio and
other StationPlaylist apps, as well as providing utilities to control Studio
from anywhere. Supported apps include Studio, Creator, Track Tool, VT
Recorder, and Streamer, as well as SAM, SPL, and AltaCast encoders.</p>
<p>For more information about the add-on, read the <a href="https://github.com/chrisDuffley/stationplaylist/wiki/SPLAddonGuide">add-on guide</a>.</p>
<p>IMPORTANT NOTES:</p>
<ul>
<li>This add-on requires StationPlaylist suite 5.40 or later.</li>
<li>Some add-on features will be disabled or limited if NVDA is running in
secure mode such as in logon screen.</li>
<li>For best experience, disable audio ducking mode.</li>
<li>Starting from 2018, <a href="https://github.com/ChrisDuffley/stationplaylist/wiki/splchangelog">changelogs for old add-on releases</a> will be found
on GitHub. This add-on readme will list changes from version 23.02 (2023)
onwards.</li>
<li>While Studio is running, you can save, reload saved settings, or reset
add-on settings to defaults by pressing Control+NVDA+C, Control+NVDA+R
once, or Control+NVDA+R three times, respectively. This is also applicable
to encoder settings - you can save and reset (not reload) encoder settings
if using encoders.</li>
<li>Many commands will provide speech output while NVDA is in speak on demand
mode (NVDA 2024.1 and later).</li>
</ul>
<h2>Shortcut keys</h2>
<p>Most of these will work in Studio only unless otherwise specified. Unless
noted otherwise, these commands support speak on demand mode.</p>
<ul>
<li>Alt+Shift+T from Studio window: announce elapsed time for the currently
playing track.</li>
<li>Control+Alt+T (two finger flick down in SPL touch mode) from Studio
window: announce remaining time for the currently playing track.</li>
<li>NVDA+Shift+F12 (two finger flick up in SPL touch mode) from Studio window:
announces broadcaster time such as 5 minutes to top of the hour. Pressing
this command twice will announce minutes and seconds till top of the hour.</li>
<li>Alt+NVDA+1 (two finger flick right in SPL mode) from Studio window: Opens
alarms category in Studio add-on configuration dialog (does not support
speak on demand).</li>
<li>Alt+NVDA+1 from Creator's Playlist Editor and Remote VT playlist editor:
Announces scheduled time for the loaded playlist.</li>
<li>Alt+NVDA+2 from Creator's Playlist Editor and Remote VT playlist editor:
Announces total playlist duration.</li>
<li>Alt+NVDA+3 from Studio window: Toggles cart explorer to learn cart
assignments (does not support speak on demand).</li>
<li>Alt+NVDA+3 from Creator's Playlist Editor and Remote VT playlist editor:
Announces when the selected track is scheduled to play.</li>
<li>Alt+NVDA+4 from Creator's Playlist Editor and Remote VT playlist editor:
Announces rotation and category associated with the loaded playlist.</li>
<li>Control+NVDA+f from Studio window: Opens a dialog to find a track based on
artist or song name. Press NVDA+F3 to find forward or NVDA+Shift+F3 to
find backward (does not support speak on demand).</li>
<li>Alt+NVDA+R from Studio window: Steps through library scan announcement
settings (does not support speak on demand).</li>
<li>Control+Shift+X from Studio window: Steps through braille timer settings
(does not support speak on demand).</li>
<li>Control+Alt+left/right arrow (while focused on a track in Studio, Creator,
Remote VT, and Track Tool): Move to previous/next track column (does not
support speak on demand).</li>
<li>Control+Alt+up/down arrow (while focused on a track in Studio, Creator,
Remote VT, and Track Tool): Move to previous/next track and announce
specific columns (does not support speak on demand).</li>
<li>Control+NVDA+1 through 0 (while focused on a track in Studio, Creator
(including Playlist Editor), Remote VT, and Track Tool): Announce column
content for a specified column (first ten columns by default). Pressing
this command twice will display column information on a browse mode
window.</li>
<li>Control+NVDA+- (hyphen while focused on a track in Studio, Creator, Remote
VT, and Track Tool): display data for all columns in a track on a browse
mode window (does not support speak on demand).</li>
<li>NVDA+V while focused on a track (Studio's playlist viewer only): toggles
track column announcement between screen order and custom order (does not
support speak on demand).</li>
<li>Alt+NVDA+C while focused on a track (Studio's playlist viewer only):
announces track comments if any.</li>
<li>Alt+NVDA+0 from Studio window: Opens the Studio add-on configuration
dialog (does not support speak on demand).</li>
<li>Alt+NVDA+P from Studio window: Opens the Studio broadcast profiles dialog
(does not support speak on demand).</li>
<li>Alt+NVDA+F1: Open welcome dialog (does not support speak on demand).</li>
</ul>
<h2>Unassigned commands</h2>
<p>The following commands are not assigned by default; if you wish to assign
them, use Input Gestures dialog to add custom commands. To do so, from
Studio window, open NVDA menu, Preferences, then Input Gestures. Expand
StationPlaylist category, then locate unassigned commands from the list
below and select "Add", then type the gesture you wish to use.</p>
<p>Important: some of these commands will not work if NVDA is running in secure
mode such as from login screen. Not all commands support speak on demand.</p>
<ul>
<li>Switching to SPL Studio window from any program (unavailable in secure
mode, does not support speak on demand).</li>
<li>SPL Controller layer (unavailable in secure mode).</li>
<li>Announcing Studio status such as track playback from other programs
(unavailable in secure mode).</li>
<li>Announcing encoder connection status from any program (unavailable in
secure mode).</li>
<li>SPL Assistant layer from SPL Studio.</li>
<li>Announce time including seconds from SPL Studio.</li>
<li>Announcing temperature.</li>
<li>Announcing title of next track if scheduled.</li>
<li>Announcing title of the currently playing track.</li>
<li>Marking current track for start of track time analysis.</li>
<li>Performing track time analysis.</li>
<li>Take playlist snapshots.</li>
<li>Find text in specific columns (does not support speak on demand).</li>
<li>Find tracks with duration that falls within a given range via time range
finder (does not support speak on demand).</li>
<li>Quickly enable or disable metadata streaming (does not support speak on
demand).</li>
</ul>
<h2>Additional commands when using encoders</h2>
<p>The following commands are available when using encoders, and the ones used
for toggling options for on-connection behavior such as focusing to Studio,
playing the first track, and toggling of background monitoring can be
assigned through the Input Gestures dialog in NVDA menu, Preferences, Input
Gestures, under the StationPlaylist category. These commands do not support
speak on demand.</p>
<ul>
<li>F9: connect the selected encoder.</li>
<li>F10 (SAM encoder only): Disconnect the selected encoder.</li>
<li>Control+F9: Connect all encoders.</li>
<li>Control+F10 (SAM encoder only): Disconnect all encoders.</li>
<li>Control+Shift+F11: Toggles whether NVDA will switch to Studio window for
the selected encoder if connected.</li>
<li>Shift+F11: Toggles whether Studio will play the first selected track when
encoder is connected to a streaming server.</li>
<li>Control+F11: Toggles background monitoring of the selected encoder.</li>
<li>Control+F12: opens a dialog to select the encoder you have deleted (to
realign encoder labels and settings).</li>
<li>Alt+NVDA+0 or F12: Opens encoder settings dialog to configure options such
as encoder label.</li>
</ul>
<p>In addition, column review commands are available, including (supports speak
on demand):</p>
<ul>
<li>Control+NVDA+1: Encoder position.</li>
<li>Control+NVDA+2: encoder label.</li>
<li>Control+NVDA+3 from SAM Encoder: Encoder format.</li>
<li>Control+NVDA+3 from SPL and AltaCast Encoder: Encoder settings.</li>
<li>Control+NVDA+4 from SAM Encoder: Encoder connection status.</li>
<li>Control+NVDA+4 from SPL and AltaCast Encoder: Transfer rate or connection
status.</li>
<li>Control+NVDA+5 from SAM Encoder: Connection status description.</li>
</ul>
<h2>SPL Assistant layer</h2>
<p>This layer command set allows you to obtain various status on SPL Studio,
such as whether a track is playing, total duration of all tracks for the
hour and so on. From any SPL Studio window, press the SPL Assistant layer
command, then press one of the keys from the list below (one or more
commands are exclusive to playlist viewer). You can also configure NVDA to
emulate commands from other screen readers.</p>
<p>The available commands are (most commands support speak on demand):</p>
<ul>
<li>A: Automation.</li>
<li>C (Shift+C in JAWS layout): Title for the currently playing track.</li>
<li>C (JAWS layout): Toggle cart explorer (playlist viewer only, does not
support speak on demand).</li>
<li>D (R in JAWS layout): Remaining duration for the playlist (if an error
message is given, move to playlist viewer and then issue this command).</li>
<li>E: Metadata streaming status.</li>
<li>Shift+1 through Shift+4, Shift+0: Status for individual metadata streaming
URL's (0 is for DSP encoder).</li>
<li>F: Find track (playlist viewer only, does not support speak on demand).</li>
<li>H: Duration of music for the current hour slot.</li>
<li>Shift+H: Remaining track duration for the hour slot.</li>
<li>I (L in JAWS layout): Listener count.</li>
<li>K: Move to the marked track (playlist viewer only).</li>
<li>Control+K: Set the current track as the place marker track (playlist
viewer only).</li>
<li>L (Shift+L in JAWS layout): Line in.</li>
<li>M: Microphone.</li>
<li>N: Title for the next scheduled track.</li>
<li>P: Playback status (playing or stopped).</li>
<li>Shift+P: Pitch of the current track.</li>
<li>R (Shift+E in JAWS layout): Record to file enabled/disabled.</li>
<li>Shift+R: Monitor library scan in progress.</li>
<li>S: Track starts (scheduled).</li>
<li>Shift+S: Time until selected track will play (track starts in).</li>
<li>T: Cart edit/insert mode on/off.</li>
<li>U: Studio up time.</li>
<li>W: Weather and temperature if configured.</li>
<li>Y: Playlist modified status.</li>
<li>F8: Take playlist snapshots (number of tracks, longest track, etc.).</li>
<li>Shift+F8: Request playlist transcripts in numerous formats.</li>
<li>F9: Mark current track for start of playlist analysis (playlist viewer
only).</li>
<li>F10: Perform track time analysis (playlist viewer only).</li>
<li>F12: Switch between current and a predefined profile.</li>
<li>F1: Layer help.</li>
</ul>
<h2>SPL Controller</h2>
<p>The SPL Controller is a set of layered commands you can use to control SPL
Studio anywhere. Press the SPL Controller layer command, and NVDA will say,
"SPL Controller." Press another command to control various Studio settings
such as microphone on/off or play the next track.</p>
<p>Important: SPL Controller layer commands are disabled if NVDA is running in
secure mode.</p>
<p>The available SPL Controller commands are (some commands support speak on
demand):</p>
<ul>
<li>P: Play the next selected track.</li>
<li>U: Pause or unpause playback.</li>
<li>S: Stop the track with fade out.</li>
<li>T: Instant stop.</li>
<li>M: Turn on microphone.</li>
<li>Shift+M: Turn off microphone.</li>
<li>A: Turn on automation.</li>
<li>Shift+A: Turn off automation.</li>
<li>L: Turn on line-in input.</li>
<li>Shift+L: Turn off line-in input.</li>
<li>R: Remaining time for the currently playing track.</li>
<li>Shift+R: Library scan progress.</li>
<li>C: Title and duration of the currently playing track (supports speak on
demand).</li>
<li>Shift+C: Title and duration of the upcoming track if any (supports speak
on demand).</li>
<li>E: Encoder connection status (supports speak on demand).</li>
<li>I: Listener count (supports speak on demand).</li>
<li>Q: Studio status information such as whether a track is playing,
microphone is on and others (supports speak on demand).</li>
<li>Cart keys (F1, Control+1, for example): Play assigned carts from anywhere.</li>
<li>H: Layer help.</li>
</ul>
<h2>Track and microphone alarms</h2>
<p>By default, NVDA will play a beep if five seconds are left in the track
(outro) and/or intro, as well as to hear a beep if microphone has been
active for a while. To configure track and microphone alarms, press
Alt+NVDA+1 to open alarms settings in Studio add-on settings screen. You can
also use this screen to configure if you'll hear a beep, a message or both
when alarms are turned on.</p>
<h2>Track Finder</h2>
<p>If you wish to quickly find a song by an artist or by song name, from track
list, press Control+NVDA+F. Type or choose the name of the artist or the
song name. NVDA will either place you at the song if found or will display
an error if it cannot find the song you're looking for. To find a previously
entered song or artist, press NVDA+F3 or NVDA+Shift+F3 to find forward or
backward.</p>
<p>Note: Track Finder is case-sensitive.</p>
<h2>Cart Explorer</h2>
<p>Depending on edition, SPL Studio allows up to 96 carts to be assigned for
playback. NVDA allows you to hear which cart, or jingle is assigned to these
commands.</p>
<p>To learn cart assignments, from SPL Studio, press Alt+NVDA+3. Pressing the
cart command once will tell you which jingle is assigned to the
command. Pressing the cart command twice will play the jingle. Press
Alt+NVDA+3 to exit cart explorer. See the add-on guide for more information
on cart explorer.</p>
<h2>Track time analysis</h2>
<p>To obtain length to play selected tracks, mark current track for start of
track time analysis (SPL Assistant, F9), then press SPL Assistant, F10 when
reaching end of selection.</p>
<h2>Columns Explorer</h2>
<p>By pressing Control+NVDA+1 through 0, you can obtain contents of specific
columns. By default, these are first ten columns for a track item (in
Studio: artist, title, duration, intro, outro, category, year, album, genre,
mood). For playlist editor in Creator and Remote VT client, column data
depends on column order as shown on screen. In Studio, Creator's main track
list, and Track Tool, column slots are preset regardless of column order on
screen and can be configured from add-on settings dialog under columns
explorer category.</p>
<h2>Track column announcement</h2>
<p>You can ask NVDA to announce track columns found in Studio's playlist viewer
in the order it appears on screen or using a custom order and/or exclude
certain columns. Press NVDA+V to toggle this behavior while focused on a
track in Studio's playlist viewer. To customize column inclusion and order,
from column announcement settings panel in add-on settings, uncheck
"Announce columns in the order shown on screen" and then customize included
columns and/or column order.</p>
<h2>Playlist snapshots</h2>
<p>You can press SPL Assistant, F8 while focused on a playlist in Studio to
obtain various statistics about a playlist, including number of tracks in
the playlist, longest track, top artists and so on. After assigning a custom
command for this feature, pressing the custom command twice will cause NVDA
to present playlist snapshot information as a webpage so you can use browse
mode to navigate (press escape to close).</p>
<h2>Playlist Transcripts</h2>
<p>Pressing SPL Assistant, Shift+F8 will present a dialog to let you request
playlist transcripts in numerous formats, including in a plain text format,
an HTML table or a list.</p>
<h2>Configuration dialog</h2>
<p>From studio window, you can press Alt+NVDA+0 to open the add-on
configuration dialog. Alternatively, go to NVDA's preferences menu and
select SPL Studio Settings item. Not all settings are available if NVDA is
running in secure mode.</p>
<h2>Broadcast profiles dialog</h2>
<p>You can save settings for specific shows into broadcast profiles. These
profiles can be managed via SPL broadcast profiles dialog which can be
accessed by pressing Alt+NVDA+P from Studio window.</p>
<h2>SPL touch mode</h2>
<p>If you are using Studio on a touchscreen computer with NVDA installed, you
can perform some Studio commands from the touchscreen. First use three
finger tap to switch to SPL mode, then use the touch commands listed above
to perform commands.</p>
<h2>Version 24.03</h2>
<ul>
<li>Compatible with NVDA 2024.1.</li>
<li>NVDA 2023.3.3 or later is required.</li>
<li>Support for StationPlaylist suite 6.10.</li>
<li>Most commands support speak on demand (NVDA 2024.1) so announcements can
be spoken in this mode.</li>
</ul>
<h2>Version 24.01</h2>
<ul>
<li>The commands for the Encoder Settings dialog for use with the SPL and SAM
Encoders are now assignable, meaning that you can change them from their
defaults under the StationPlaylist category in NVDA Menu > Preferences >
Input Gestures. The ones that are not assignable are the connect and
disconnect commands. Also, to prevent command conflicts and make much
easier use of this command on remote servers, the default gesture for
switching to Studio after connecting is now Control+Shift+F11 (previously
just F11). All of these can of course still be toggled from the Encoder
Settings dialog (NVDA+Alt+0 or F12).</li>
</ul>
<h2>Version 23.05</h2>
<ul>
<li>To reflect the maintainer change, the manifest has been updated to
indicate as such.</li>
</ul>
<h2>Version 23.02</h2>
<ul>
<li>NVDA 2022.4 or later is required.</li>
<li>Windows 10 21H2 (November 2021 Update/build 19044) or later is required.</li>
<li>In Studio's playlist viewer, NVDA will not announce column headers such as
artist and title if table headers setting is set to either "rows and
columns" or "columns" in NVDA's document formatting settings panel.</li>
</ul>
<h2>Older releases</h2>
<p>Please see the <a href="https://github.com/ChrisDuffley/stationplaylist/wiki/splchangelog">changelog</a> for release notes for old add-on releases.</p>
Tone Masterhttp://addons.nvda-project.org/addons/toneMaster.zh_CN.html2024-02-13T14:37:33Z2016-07-17T23:17:46Z
<ul>
<li>Authors: Hrvoje Katić</li>
<li>下载 <a href="https://addons.nvda-project.org/files/get.php?file=tmast">稳定版</a></li>
<li>NVDA compatibility: 2019.3 and later</li>
</ul>
<p>欢迎来到Tone Master!我开发了这个小小的NVDA插件只是为了好玩,希望让你在使用它时玩得开心。</p>
<p>我一直想用NVDA来创作音乐曲调,而不仅仅是听NVDA的进度和错误的嘟嘟声。但是,这并不容易,所以首先我想让它变得更容易。这就是我写Tone
Master的原因。想象一下,听到Mozzart或Beethoven的NVDA演奏歌曲是一种怎么样的体验,或者滚石乐队最受欢迎的歌曲。虽然最终结果听起来像旧手机上的铃声,但它可能仍然很有趣。</p>
<p>Tone
Master通过实现音调数据文件简化了播放音调序列的过程。这些文件可以使用您喜欢的文本编辑器进行编辑,然后保存以便使用NVDA进行播放。继续阅读说明!</p>
<h2>音调数据文件</h2>
<p>在您使用Tone Master播放第一首乐曲之前,您必须先创建并加载音色数据文件。音调数据文件只是扩展名为.tdf的文本文件。 Tone
Master使用这些文件处理和播放音调序列。要为Tone Master创建音色数据文件以便能够成功播放,您必须遵循下面描述的简单规则。</p>
<ol>
<li><ol>
<li><p>.tdf文件中的每一行<em>必须</em>包含三个以冒号(:)分隔的参数。第一个参数是音调,第二个参数是音调持续时间,第三个参数是每个音调之间的静音时间。所有三个参数都需要指定,否则Tone
Master将无法播放您的音调数据。</p></li>
</ol>
</li>
<li><ol>
<li>间距和持续时间参数必须指定为有符号整数,并且必须将静音指定为浮点实数值。</li>
</ol>
</li>
<li><ol>
<li>.tdf文件中任何行开头的哈希符号(#)将作为注释进行树形化,Tone Master将忽略该符号。</li>
</ol>
</li>
</ol>
<p>例子:播放3个音调的序列</p>
<p>1500:100:0.5</p>
<p>1000:100:0.09</p>
<p>500:100:0.7</p>
<p>在该示例中,序列中的第一音调具有1500的音高,100的持续时间和0.5的静音。第二个音调的音高为1000,持续时间为100,静音为0.09。序列中的最后一个音调具有音高500,持续时间100,并且静音为0.7。</p>
<p>注意,即使您认为不是,也需要使用静音参数来指定,因为如果没有指定,NVDA将覆盖下一个音调的前一个音调,您将获得意想不到的结果。这就是为什么我认为这是必要的。</p>
<p>要更熟悉音调数据文件语法,请查看并尝试编辑此插件附带的示例文件。它位于“tones”子文件夹中,所有.tdf文件也必须位于此子文件夹中。</p>
<h2>快捷键</h2>
<ul>
<li>Alt+NVDA+T: 播放当前加载的音色数据。</li>
<li>Alt+Shift+NVDA+T: 如果正在播放任何音调数据,则停止播放当前加载的音色数据。</li>
<li>Alt+NVDA+N: 在记事本中创建并打开一个新的空白音调数据文件以进行编辑。</li>
<li>Alt + NVDA + L:打开一个对话框,您可以选择要加载的一个可用音色数据文件进行播放。</li>
<li>Alt + NVDA + E:在记事本中打开当前加载的音色数据文件以进行编辑。</li>
<li>Alt + NVDA + O:打开一个带有音色数据文件的文件夹。</li>
</ul>
<h2>其他说明</h2>
<p>您还可以通过进入NVDA菜单,Tools SubMenu,Tone Master
SubMenu来创建,编辑和加载音色数据文件,或打开这些文件所在的音调文件夹。</p>
<p>显示创建新音调数据文件的对话框时,键入不带.tdf扩展名的名称。该扩展程序将由Tone Master自动添加。如果未指定名称,Tone
Master将使用默认名称“untitled.tdf”。 Tone
Master将自动为您创建和加载新文件,它也将在记事本中打开以进行编辑。在文件名提示下按Escape取消新文件创建。</p>
<p>注意:Tone Master使用记事本编辑音调数据文件,因为默认情况下它附带Windows中,因此任何计算机都应该有记事本这个程序。</p>
<p>当打开加载音调数据文件的对话框时,使用光标键选择要加载的文件,然后按Enter键。按Escape键取消加载。</p>
<p>使用.tdf文件打开文件夹时,可以在文本编辑器中加载它们以供查看或编辑。但是,为了在运行中听到您的结果,我强烈建议您尽可能先将文件加载到Tone
Master中。然后,您可以编辑文件,保存进度,每次保存后,您可以使用播放快捷键来听取最后的结果。</p>
<h2>版本1.3</h2>
<ul>
<li>修复:修复较新的NVDA版本的兼容性问题。</li>
</ul>
<h2>版本1.2</h2>
<ul>
<li>修正:解决主要问题,选择空音数据,然后选择另一个并尝试播放,导致音调数据无法播放。</li>
</ul>
<h2>版本1.1</h2>
<ul>
<li><ul>
<li>新增:创建新音色数据文件并在记事本中打开以进行编辑的选项。</li>
</ul>
</li>
<li>新增:在记事本中编辑当前加载的音色数据文件的选项。</li>
<li>改进:错误消息提示现在变的更加友好。</li>
<li>改进:现在不允许在安全屏幕上禁用某些插件功能,例如打开音调文件夹或在记事本中编辑音调数据文件。</li>
<li>改进:如果音频数据播放停止,NVDA将通知用户。</li>
<li>修正:在播放音色数据时不允许重复播放音色数据。</li>
</ul>
<h2>版本1.0</h2>
<ul>
<li>初始发布。</li>
</ul>
mp3DirectCut-NVDA支持插件http://addons.nvda-project.org/addons/mp3DirectCut.zh_CN.html2024-03-26T20:46:23Z2016-07-15T19:59:20Z
<ul>
<li>Author(s) : Abdel, Rémy, Abdellah zineddine, Jean-François COLAS.</li>
</ul>
<h1>插件介绍</h1>
<p>此插件改进了mp3DirectCut的无障碍支持。</p>
<p>插件已经过mp3DirectCut版本的测试,范围从212到223。</p>
<h2>键盘快捷键</h2>
<p>此插件提供以下快捷键:</p>
<ul>
<li><p>B</p>
<ul>
<li>确认标记区间B的开头。</li>
</ul>
</li>
<li><p>Ctrl+Shift+B</p>
<ul>
<li>标记区间B的开头。</li>
<li>按两次选择时长。</li>
</ul>
</li>
<li><p>Ctrl+Shift+D</p>
<ul>
<li>给出从文件开头到当前位置的时间。</li>
<li>按两次朗读总时长。</li>
</ul>
</li>
<li><p>Ctrl + R</p>
<ul>
<li>确认所选内容已被取消。</li>
</ul>
</li>
<li><p>Ctrl+Shift+R</p>
<ul>
<li>读出当前位置到文件末尾的剩余时间。</li>
</ul>
</li>
<li><p>Ctrl+Shift+E</p>
<ul>
<li>标记区间N的结束位置。</li>
<li>按两次读出区间B和N的位置和时长。</li>
</ul>
</li>
<li><p>Ctrl+Shift+P</p>
<ul>
<li>给出当前文件中实际零件和零件总数的参考。</li>
</ul>
</li>
<li><p>Ctrl + Shift + 空格</p>
<ul>
<li>用于在录制过程中确定流量计的当前级别。</li>
<li>按两次重置。</li>
</ul>
</li>
<li><p>下箭头</p>
<ul>
<li>让您看到播放头的当前位置。</li>
<li>此命令还将光标定位在选择 N 结束的标记的位置, 同时在进行选择时给出此标记的位置。</li>
<li>在音量对话框中, 说出通常可以用向下箭头到达的下一个值。</li>
<li>这个数值默认不朗读。</li>
</ul>
</li>
<li><p>动作按钮: 结束</p>
<ul>
<li>将播放光标移动到当前文件的末尾, 并给出总时间。</li>
</ul>
</li>
<li><p>动作按钮: 第一张</p>
<ul>
<li>将播放光标移动到当前文件的开头。</li>
</ul>
</li>
<li><p>左箭头</p>
<ul>
<li>让我们在播放过程中短暂返回一秒, 同时给出当前持续时间。</li>
<li>此持续时间可在 mp3directcut 选项中进行配置。</li>
</ul>
</li>
<li><p>N</p>
<ul>
<li>用于确认选择 N 的末尾标记的正确位置。</li>
</ul>
</li>
<li><p>下翻页</p>
<ul>
<li>让我们在播放过程中进行10秒的飞跃, 同时给出当前持续时间。</li>
<li>此持续时间可在 mp3directcut 选项中进行配置。</li>
</ul>
</li>
<li><p>上翻页</p>
<ul>
<li>让我们在播放过程中返回 10秒, 同时给出当前持续时间。</li>
<li>此持续时间可在 mp3directcut 选项中进行配置。</li>
</ul>
</li>
<li><p>R</p>
<ul>
<li>允许准备记录以及是否可以按空格键启动。</li>
</ul>
</li>
<li><p>右箭头</p>
<ul>
<li>让我们在播放过程中做一秒钟的短暂转发, 同时给出当前的持续时间。</li>
<li>此持续时间可在 mp3directcut 选项中进行配置。</li>
</ul>
</li>
<li><p>Ctrl + 右箭头</p>
<ul>
<li>移动到下一个拆分点, 同时给出当前持续时间。</li>
</ul>
</li>
<li><p>Ctrl + 左箭头</p>
<ul>
<li>移动到上一个拆分点, 同时给出当前持续时间。</li>
</ul>
</li>
<li><p>Shift+右箭头</p>
<ul>
<li>让我们在播放过程中做一个四百分之一秒的简短转发, 同时给出当前的持续时间。</li>
</ul>
</li>
<li><p>Shift+左箭头</p>
<ul>
<li>让我们在播放过程中做一个简短的向后四百分之一秒, 同时给出当前的持续时间。</li>
</ul>
</li>
<li><p>S</p>
<ul>
<li>用于停止读取并给出当前持续时间。</li>
</ul>
</li>
<li><p>空格</p>
<ul>
<li>如果录制已准备就绪, 请启动此录制。</li>
<li>如果录制正在进行中, 请通过将光标定位在开始处来停止录制。</li>
<li>如果加载了文件, 则开始朗读。</li>
<li>如果读取正在进行中, 则允许通过给出当前持续时间来进行暂停。</li>
<li>如果暂停读取, 则允许从当前位置重新启动读取。</li>
</ul>
</li>
<li><p>上箭头</p>
<ul>
<li>让您看到播放头的当前位置。</li>
<li>此命令还将光标定位在选择 B 开头的标记位置, 同时在进行选择时给出此标记的位置。</li>
<li>在音量对话框中, 将通常可以用 upArrow 到达的上一个值发声。</li>
<li>这个数值默认不朗读。</li>
</ul>
</li>
<li><p>NVDA+H</p>
<ul>
<li>添加快捷键使用'NVDA + H'打开当前插件的帮助;。</li>
</ul>
</li>
</ul>
<h2>兼容性</h2>
<ul>
<li>This add-on is compatible with the versions of NVDA ranging from 2019.3
and beyond.</li>
</ul>
<h2>Changes for 20240327.0.0</h2>
<ul>
<li>Fixed a bug that caused a log error when reloading plugins, thanks to Rob,
from nvda-addons mailing list;</li>
</ul>
<h2>Changes for 20240326.0.0</h2>
<ul>
<li>Updated compatibility for nvda-2024.1.;</li>
<li>Deleted download link from readme, the download link for future updates
will now only be available from the add-on store.</li>
</ul>
<h2>Changes for 20231229.0.0</h2>
<ul>
<li>Added a backward compatible implementation to support speak on demand
mode, which will soon be available with nvda-2024.1.</li>
</ul>
<h2>Changes for 20231007.0.0</h2>
<ul>
<li>After placing the cutting points and after opening the cutting properties
window, with "Ctrl+N", adding accessibility to the title of this window by
indicating the part index.</li>
<li>In reading mode, after moving the start or end markers of selections with
keys 1 to 6 of the alphanumeric pad, addition of automatic start of
reading from the new position;</li>
<li>Fixed a bug that occurred when consulting the remaining time with
"control+shift+r" from the beginning of the track.</li>
</ul>
<h2>Changes for 20230728.0.0</h2>
<ul>
<li>Applied the flake8 and mypy rules to the code;</li>
<li>Changed the minimum supported NVDA version to 2019.3 to support
annotations introduced in Python 3.</li>
</ul>
<h2>Changes for 20230508.0.0 and beyond</h2>
<ul>
<li>Changed version number, minimum NVDA version and download link according
to store conventions/requirements.</li>
</ul>
<h2>20.12 更新日志</h2>
<ul>
<li>在录制和阅读最新版本的 mp3 直接切割时停止语音;</li>
<li>修复了使用Python 3读取NVDA新版本的剩余时间的问题。</li>
</ul>
<h2>19.02版的更改</h2>
<ul>
<li>在 nvda 2018.2新增的设置面板中添加了插件的配置;</li>
<li>现在使用YY.MM形式的版本号(年份为2位数,后跟一个点,后跟月份为2位数);</li>
<li>兼容nvda 2019.1的插件新版本格式。</li>
</ul>
<h2>版本4.0</h2>
<ul>
<li>添加了Python 2.7和3的插件的兼容性;</li>
<li>修复了包含非ASCII字符的附加路径的错误。</li>
</ul>
<h2>版本3.0</h2>
<ul>
<li>使用gui.guiHelper模块确保插件配置对话框的正确外观;</li>
<li>格式化字符串使用格式而不是 %s;</li>
<li>使用遵守实施准则。</li>
</ul>
<h2>版本2.3</h2>
<ul>
<li>给插件添加了GPL许可证;</li>
<li>将选择结束的脚本快捷方式从Ctrl + Shift + N更改为Ctrl + Shift + E,因为Ctrl + Shift +
N不能与最新版本的mp3DirectCut一起使用;</li>
<li>添加了一个脚本,以确认已使用“Ctrl + r”取消选择;</li>
<li>在appModule'mp3directcut.py'的代码中做了一些更正。</li>
</ul>
<h2>版本2.2</h2>
<ul>
<li>更正给出选择标记位置的脚本。</li>
</ul>
<h2>版本2.1.1</h2>
<ul>
<li>删除脚本,给出总时间并将此信息添加到脚本中,给出经过的时间;</li>
<li>添加了与其他公告分开启用或禁用模块配置选项中与空格键相关的通知的功能;</li>
<li>添加了在模块的配置选项中启用或禁用选择范围放置的通知的功能;</li>
<li>在切割点移动时添加当前零件的通知;</li>
<li>更正与垂直键相关的公告;</li>
<li>添加脚本以使用'NVDA + H'打开当前加载项的帮助;</li>
<li>将插件的配置菜单从“工具”菜单移动到NVDA的“首选项”菜单。</li>
</ul>
<h2>版本2.1</h2>
<ul>
<li>使用Control + Right Arrow添加脚本以发声移动到下一个分割点;</li>
<li>使用Control +左光标添加脚本以发声移动到上一个分割点;</li>
<li>使用Shift +右光标添加一个脚本,用于向前方播放百分之四秒的位移;</li>
<li>使用Shift +左光标添加一个脚本来发出第二百分之二秒位移的位移;</li>
<li>将“for mp3DirectCut”中的插件摘要更正为“mp3DirectCut”。</li>
</ul>
<h2>版本2.0</h2>
<ul>
<li>添加一个快捷键, 朗读剩余的时间与 "Ctrl+Shift+R";</li>
<li>固定阅读时间,包括小时;</li>
<li>增加了区分千分之一秒或百分之一秒的功能。</li>
</ul>
<h2>版本1.1</h2>
<ul>
<li><p>可以在输入手势中mp3DirectCut这个分类里修改快捷键;</p>
<ul>
<li>它们将仅在使用 mp3DirectCut 软件时可见。</li>
</ul>
</li>
<li><p>添加了在NVDA配置选项中启用或禁用朗读选择范围的功能;</p></li>
</ul>
<h2>版本1.0</h2>
<ul>
<li>发布初始版本。</li>
</ul>
Crash Hero错误提示插件http://addons.nvda-project.org/addons/crashHero.zh_CN.html2023-10-31T02:07:43Z2016-07-08T06:20:30Z
<ul>
<li>Author: Derek Riemer</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=crashHero-beta">beta version</a></li>
</ul>
<p>Note: This add-on is primarily useful for developers, or people running test
versions of NVDA. Use this add-on to let NVDA prompt you for more
information after a crash. For more information, visit <a href="https://derekriemer.com/node/44">the Crash Hero
add-on blog post</a>.</p>
每日提示http://addons.nvda-project.org/addons/tipOfTheDay.zh_CN.html2023-05-10T20:38:33Z2016-06-05T03:01:17Z
<ul>
<li>作者: Derek Riemer.</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=tod">稳定版</a></li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=tod-dev">开发板</a></li>
</ul>
<p>这个插件可以帮助你学习如何使用NVDA来提示你的每一天。</p>
<h2>说明:</h2>
<p>一旦安装了插件,当NVDA首次重新启动时,它会要求您选择使用NVDA的舒适级别。你应该选择你的舒适水平,例如,如果你是一个电脑新手,那么就选择初学者。</p>
<p>然后,NVDA会向您显示一天的小费。您可以按前进和后退按钮来更改您看到的提示,然后在完成后按关闭或退出。要找到这些按钮,可以在对话框启动后按下Tab键,直到找到按钮,然后按下Enter或空格键按下它们。完成后,按编辑栏中的退出按钮,或按关闭按钮。要随时获得小费,请从NVDA菜单中选择一天中的小费选项。</p>
<p>要改变您的计算机的舒适等级,以便插件可以提供更多针对性的提示,请从NVDA偏好设置菜单中选择一天中的提示选项。一旦安装了插件并且NVDA重新启动,插件将询问您使用NVDA的舒是级别。</p>
Espeak的SpeechPlayerhttp://addons.nvda-project.org/addons/speechPlayerInEspeak.zh_CN.html2023-05-10T20:38:33Z2016-05-31T04:35:35Z
<ul>
<li>作者:NV Access Limited</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=spie">SpeechPlayer in Espeak</a></li>
</ul>
<p>SpeechPlayer和eSpeak的混合体,包含爱德华的声音。</p>
金色光标http://addons.nvda-project.org/addons/goldenCursor.zh_CN.html2023-07-15T02:39:11Z2016-01-16T19:07:07Z
<ul>
<li>作者: salah atair, Joseph Lee</li>
<li>下载<a href="https://www.nvaccess.org/addonStore/legacy?file=goldenCursor">稳定版</a></li>
<li>NVDA 兼容性:2022.4 及更高版本</li>
</ul>
<p>该插件可以让您使用键盘移动鼠标并针对特定应用程序保存鼠标位置。</p>
<h2>快捷键</h2>
<ul>
<li>Control+NVDA+L:查看在当前应用程序保存的鼠标位置(如果有)。您还可以在该对话框中为这些位置分配手势。按下分配的手势,将在保存的位置执行左键单击。</li>
<li>Shift+NVDA+l: 为当前所聚焦的应用程序保存一个位置标记。</li>
<li>Windows+NVDA+C: 更改每次移动鼠标时的单位。</li>
<li>Windows+NVDA+R: 切换鼠标移动限制区域。</li>
<li>Windows+NVDA+S: 切换是否在鼠标移动过程中读出像素坐标。</li>
<li>Windows+NVDA+J: 输入横纵坐标以移动鼠标位置。</li>
<li>Windows+NVDA+P: 读出当前鼠标的位置。</li>
<li>Windows+NVDA+M: 开关鼠标方向键模式。</li>
<li>Windows + NVDA + 方向键:移动鼠标位置(在方向键模式开启时,只需使用方向键即可)。</li>
</ul>
<p>注意: 这些手势可以在“输入手势”对话框“金色光标”类别下自定义。</p>
<h2>注意</h2>
<ul>
<li>在共享位置(标记)时,用户之间应使用相同的显示分辨率。</li>
<li>为取得最最佳兼容性,您应该按 Windows + 上方向键来最大化窗口。</li>
<li>分享位置时,现有的位置(标签)应重命名。</li>
<li>版本1.x和2.x鼠标位置格式不兼容。</li>
<li>要执行原本方向键的功能,请先关闭鼠标方向键模式。</li>
<li>删除保存的位置时,如果没有保存的位置,该应用程序的位置将被清除。</li>
</ul>
<h2>版本 6.2</h2>
<ul>
<li>要求 NVDA 2022.4 或更高版本。</li>
<li>兼容 NVDA 2023.1。</li>
</ul>
<h2>版本6.1</h2>
<ul>
<li>要求 NVDA 2021.3 或更高版本。</li>
<li>现在,您可以从位置列表中为已保存的位置分配快捷键。按下分配的快捷键,将对相应位置执行左键单击。</li>
</ul>
<h2>版本5.0</h2>
<ul>
<li>插件代码更新,能够与 NVDA 2021.1 兼容。</li>
<li>解决了 Flake8 的众多编码风格问题和错误。</li>
</ul>
<h2>版本4.0</h2>
<ul>
<li>要求 NVDA 2019.3或更高版本。</li>
<li>将金色光标设置对话框改为设置面板。</li>
</ul>
<h2>版本 3.3</h2>
<ul>
<li>内部更改,以支持 NVDA 的后续版本。</li>
</ul>
<h2>版本3.2</h2>
<ul>
<li>插件与NVDA 2018.3(wxPython 4)兼容。</li>
</ul>
<h2>版本3.0</h2>
<ul>
<li>如果使用NVDA 2018.2,则可以在“金色光标”类别下找到插件设置面板。</li>
</ul>
<h2>版本2.1</h2>
<ul>
<li>修正试图删除标签名称时的 unicode 解码错误。</li>
<li>打开各种插件对话框时防止出现多个实例。</li>
<li>改进了鼠标位置列表窗口的外观,并可以输入鼠标位置跳转。</li>
</ul>
<h2>版本2.0</h2>
<ul>
<li>要求 NVDA 2017.3及更高版本。</li>
<li>位置文件格式与1.x版本不兼容。如果找到1.x位置格式,则旧位置将在安装期间迁移到新格式。</li>
<li>在NVDA的“首选项”菜单中添加了一个新的金色光标设置对话框,用于配置鼠标移动单位以及鼠标移动时鼠标位置的项目。</li>
<li>更改了此插件的各种消息。</li>
<li>切换设置时,不在播放提示音。</li>
<li>您现在可以进入鼠标方向键模式,只需按方向键即可移动鼠标。</li>
<li>位置列表对话框的更改,包括新名称(现称为“鼠标位置”)和布局,显示标签的鼠标坐标以及将激活应用程序的名称显示为标题的一部分。</li>
<li>从鼠标位置对话框中,在已保存的位置标记上按 Enter 键将鼠标移动到相应位置。</li>
<li>重命名鼠标位置时,如果存在与新名称相同名称的位置标记,则会显示错误对话框。</li>
<li>删除或清除鼠标位置时,现在必须由用户确认。</li>
<li>改进鼠标位置跳转功能,包括一个新名称(现在称为新的鼠标位置)和分别输入X和Y坐标,支持使用上下方向键移动。</li>
<li>保存当前鼠标位置时显示的对话框现在会同时显示当前鼠标位置的坐标。</li>
<li>解决了在保存位置时,如果位置文件夹不存在 NVDA 可能播放错误提示音的问题。</li>
</ul>
<h2>版本1.4</h2>
<ul>
<li>删除了win32api的依赖,使其与之前和以后的 NVDA 兼容。</li>
</ul>
<h2>版本1.0</h2>
<ul>
<li>发布初始版本。</li>
</ul>
某天星期几http://addons.nvda-project.org/addons/dayOfTheWeek.zh_CN.html2024-03-26T20:46:21Z2015-09-30T21:50:46Z
<ul>
<li>作者: Abdel, Noelia.</li>
</ul>
<p>此插件允许您查找与所选日期对应的星期是星期几。</p>
<p>此插件在NVDA工具菜单中添加了一个名为“星期几”的子菜单,其中包含2个项目:</p>
<ul>
<li><p>第一个名为“搜索一天”,打开一个由3个控件组成的对话框:</p>
<ul>
<li>用于选择或输入日期的列表框;</li>
<li>“确定”按钮,显示包含您一天的消息框;</li>
<li>“取消”按钮关闭对话框。</li>
</ul>
</li>
<li><p>第二个名为 "dayoftheweek 插件设置" 的设置项将打开插件的参数, 以指定是否要朗读日期字段的标签, 它由以下元素组成:</p>
<ul>
<li>启用日期选择器的无障碍功能;</li>
<li><p>标签朗读级别, 你将有3个选择:</p>
<ul>
<li>很长(这是默认选择);</li>
<li>短(读短标签)</li>
<li>关闭(禁用标签朗读)。</li>
</ul>
</li>
<li><p>当垂直移动时,仅朗读启用当前日期字段值的通知;</p></li>
<li>一个“确定”按钮,用于保存配置;</li>
<li>“取消”按钮取消并关闭对话框。</li>
</ul>
</li>
</ul>
<h2>注意</h2>
<ul>
<li>你可以按“Esc”来关闭这些对话框;</li>
<li>您可以在“输入手势”菜单中分配一个快捷手势来打开这些对话框,更确切地说,在“星期几”类别中指定一个快捷手势;</li>
<li>如果您使用NVDA 2018.2或更高版本,您只会在工具菜单中找到一个用于搜索当天的项目,插件设置将位于NVDA设置面板中。</li>
</ul>
<h2>兼容性</h2>
<ul>
<li>This add-on is compatible with the versions of NVDA ranging from 2019.3
and beyond.</li>
</ul>
<h2>Changes for 20240326.0.0</h2>
<ul>
<li>Updated compatibility for nvda-2024.1.;</li>
<li>Deleted download link from readme, the download link for future updates
will now only be available from the add-on store.</li>
</ul>
<h2>Changes for 20231229.0.0</h2>
<ul>
<li>Added a backward compatible implementation to support speak on demand
mode, which will soon be available with nvda-2024.1.</li>
</ul>
<h2>Changes for 20231015.0.0</h2>
<ul>
<li>Fixed a bug detected when navigating with up arrow from the date picker in
the latest versions of NVDA.</li>
</ul>
<h2>Changes for 20230728.0.0</h2>
<ul>
<li>Applied the flake8 and mypy rules to the code;</li>
<li>Changed the minimum supported NVDA version to 2019.3 to support
annotations introduced in Python 3.</li>
</ul>
<h2>Changes for 20230508.0.0 and beyond</h2>
<ul>
<li>Changed version number, minimum NVDA version and download link according
to store conventions/requirements.</li>
</ul>
<h2>19.02版的更改</h2>
<ul>
<li>现在使用YY.MM形式的版本号(年份为2位数,后跟一个点,后跟月份为2位数);</li>
<li>兼容nvda 2019.1的插件新版本格式。</li>
</ul>
<h2>版本6.0</h2>
<ul>
<li>将插件设置添加到NVDA 2018.2及更高版本的NVDA通用设置面板中;</li>
<li>将用于搜索一天的项目移动到工具菜单;</li>
<li>添加了插件与2018.2之前的NVDA版本的向后兼容性支持,其中包括设置面板。</li>
</ul>
<h2>版本5.0</h2>
<ul>
<li>添加了插件与wxPython 4.0和Python3的支持;</li>
<li>修复了包含非ASCII字符的附加路径的错误。</li>
</ul>
<h2>版本4.0</h2>
<ul>
<li>该插件现在能够识别用户可以选择的所有区域日期格式;</li>
<li>添加了插件与2016.4之前的NVDA版本的向后兼容性,其中包括gui.guiHelper模块。</li>
</ul>
<h2>版本3.1</h2>
<ul>
<li>恢复到星期几的先前格式,因为它允许识别更多语言;</li>
<li>改进了日期选择器的可访问性,识别了3个字段'Day','Month'和'Year',以及它们各自的值;</li>
<li>增加了一种整合格鲁吉亚语的技术,以表彰一周的日子;</li>
<li>添加了配置对话框以启用或禁用日期选择器的辅助功能;</li>
<li>将附加子菜单从“工具”移动到“首选项”;</li>
<li>将插件类别更改为“星期几”。</li>
</ul>
<h2>版本2.0</h2>
<ul>
<li>使用gui.guiHelper模块确保对话框的正确外观和要求日期;</li>
<li>在插件中添加了GPL许可证;</li>
<li>已翻译了星期几,以便加载项在不同语言中正常工作;</li>
<li>更改了日期格式以避免编码错误。</li>
</ul>
<h2>版本1.0</h2>
<ul>
<li>发布初始版本。</li>
</ul>
VLC 媒体播放器http://addons.nvda-project.org/addons/vlc.zh_CN.html2023-05-10T20:38:33Z2015-09-29T22:47:07Z
<ul>
<li>作者: Javi Dominguez</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=vlc">稳定版</a></li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=vlc-dev">开发板</a></li>
</ul>
<p>此插件为VLC媒体播放器提供了辅助功能相关的支持。</p>
<ol>
<li>允许使用Tab和Shift + Tab浏览播放控件。要激活选定的控件,请按回车。</li>
<li>读取状态栏信息(按I)。该手势可以在NVDA首选项中设置。</li>
<li>使用VLC按键进行前后快进退:按Ctrl +左/右箭头跳过1分钟,按Shift
+左右箭头跳过5秒。您可以在NVDA首选项中设置详细程度。您也可以指定一个键盘快捷键来切换它。</li>
<li>更改随机模式(按键R)和重复模式(按键L)时宣告状态。</li>
<li><p>有一些分层的窗口和面板,NVDA在显示时无法自动将其聚焦。按下Control + Tab可尝试将它们放在前面。</p></li>
<li><p>重要提示:此插件针对 VLC 3.0 及更高版本进行优化;不能在早期版本中正常运行。</p></li>
<li>由GNU通用公共许可证分发。有关更多详细信息,请参见[文件COPYING.txt](https://github.com/javidominguez/VLC/blob/master/COPYING.txt)。</li>
</ol>
Windows 应用增强http://addons.nvda-project.org/addons/wintenApps.zh_CN.html2024-03-23T20:29:03Z2015-09-19T17:16:47Z
<ul>
<li>作者:Joseph Lee、Derek Riemer 等</li>
</ul>
<p>注意:此插件最初称为 Windows 10 应用增强,在 2021 年更名为 Windows 应用增强,以支持 Windows 10 和 Windows
11 等后续版本。此插件的部分内容仍将引用原始插件名称。</p>
<p>此插件是用于各种现代 Windows 应用的应用模块集合,以及对 Windows 10 及更高版本中某些控件的增强和修复。</p>
<p>包括以下应用程序的支持模块(有关所包含内容的详细信息,请参阅每个应用程序部分):</p>
<ul>
<li>系统键盘</li>
<li>Settings (Windows+I)</li>
</ul>
<p>注意:</p>
<ul>
<li>This add-on requires 64-bit Windows 10 22H2 (build 19045), 11 22H2 (build
22621), or later releases.</li>
<li>功能更新支持期限与消费者支持期限(家庭版、专业版、专业教育版、工作站专业版)相关联,并且插件可能会在消费者支持结束之前终止对功能更新的支持。有关更多信息和支持日期,请参阅
<a href="https://aka.ms/WindowsTargetVersioninfo">https://aka.ms/WindowsTargetVersioninfo</a>。</li>
<li>尽管可以安装,但此插件不支持 Windows Enterprise LTSC(长期服务版)和 Windows Server 版本。</li>
<li>并非支持所有的 Windows Insider Preview 版本,更偏向于支持由开发或金丝雀通道引入 Windows Insider 的功能。</li>
<li>The add-on may emulate changes included in Insider Preview builds which
are subsequently removed, and for these changes, the add-on may remove
them in future releases.</li>
<li>插件的 Dev 通道将包括可能包含或不包含在测试版和稳定版中的实验性内容,而Beta 通道将会包含为未来稳定版计划的更改。</li>
<li>插件中的某些功能或将成为NVDA屏幕阅读器的一部分。</li>
<li>为了获得内嵌 Web 试图(例如开始菜单及其上下文菜单)的应用程序的最佳体验,请在 NVDA
的浏览模式设置面板启用“输入焦点移动时的自动焦点模式支持”。</li>
</ul>
<p>有关每个版本之间所做的具体更改,请参阅<a href="https://github.com/josephsl/wintenapps/wiki/w10changelog">另外发布的更新日志</a>文档。</p>
<h2>常规增强</h2>
<ul>
<li>In Windows 11 24H2 Insider Preview builds, quick settings (shellhost.exe)
interface elements can be navigated using mouse and/or touch interaction.</li>
</ul>
<h2>系统键盘</h2>
<p>包括表情符号面板、剪贴板历史记录、触摸键盘、听写/语音输入、硬件输入建议、建议的操作(预览)、适用于 Windows10 /
Windows11的某些语言的现代输入法编辑器。查看表情符号时,为了获得最佳体验,请从 NvDA 的语音设置对话框中选中“处理字符和符号时包含
Unicode 数据(表情符号)”复选框,并将符号级别设置为“少数”或更高。在 Windows 10
中从云剪贴板历史记录粘贴时,请按空格键而非回车键来粘贴所选项目。</p>
<ul>
<li>In Windows 11, NVDA will announce suggested actions when compatible data
such as phone numbers is copied to the clipboard. This is now part of NVDA
2024.2.</li>
</ul>
<h2>Settings (Windows+I)</h2>
<ul>
<li>NVDA will report updates to Windows Update status as download and install
progresses. In Windows 10, this may result in speech interruption when
navigating Settings app while updates are being downloaded and
installed. In Windows 11, object navigation can be used in updates list to
review update status for individual entries.</li>
</ul>
Ventrilo聊天客户端支持插件http://addons.nvda-project.org/addons/ventrilo.zh_CN.html2023-05-10T20:38:33Z2015-08-28T19:19:45Z
<ul>
<li>作者: Beqa Gozalishvili, Kyle Borah</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=vent">开发板</a></li>
</ul>
<p>这个插件增强了对Ventrilo聊天客户端的支持。有关Ventrilo的更多信息,请访问<a href="https://www.ventrilo.com/">Ventrilo网站</a>。</p>
NVDA远程协助插件http://addons.nvda-project.org/addons/nvdaremote.zh_CN.html2023-05-10T20:38:33Z2015-07-03T22:28:26Z
<ul>
<li>作者: Christopher Toth, Tyler Spivey</li>
</ul>
<p>NVDA远程访问插件可以让同时装了NVDA和NVDA远程插件的两台电脑互相进行远程协助,插件只在电脑之间传输文字命令,因此即使通过NVDA官方的服务器进行连接,也能保证连接的稳定性。有关此插件的更多信息,请访问<a href="https://nvdaremote.com/">NVDA
远程插件项目首页.</a></p>
TeamTalk Classic无障碍插件http://addons.nvda-project.org/addons/teamtalk.zh_CN.html2023-05-10T20:38:33Z2015-06-10T18:49:53Z
<ul>
<li>作者: Doug Lee.</li>
<li>下载 <a href="https://www.dlee.org/teamtalk/NVDA/TeamTalk%20Classic.nvda-addon">稳定版</a></li>
</ul>
<p>这个插件提高了TeamTalk与NVDA的可访问性。有关此插件的更多信息,请访问<a href="https://www.dlee.org/teamtalk/NVDA/">TeamTalk附加主页</a>。</p>
Easy Table Navigator-简易表格导航器http://addons.nvda-project.org/addons/easyTableNavigator.zh_CN.html2024-02-13T14:36:34Z2015-04-06T01:20:45Z
<ul>
<li>Authors: Corentin Bacqué-Cazenave, Joseph Lee</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=etn">稳定版</a></li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=etn-dev">开发板</a></li>
<li>NVDA compatibility: 2019.3 and beyond</li>
</ul>
<p>This plugin adds a layer command to use simplified key combination to
navigate table cells. When the layered commands are enabled, you can
perform the following actions:</p>
<ul>
<li>Navigate to the previous or next cell horizontally or vertically using
arrow keys</li>
<li>Navigate to the first or last cell of the row or the column using
control+arrow keys or Home, End, PageUp and PageDown</li>
<li>Read the whole row or column without moving the system caret using
windows+leftArrow / windows+upArrow</li>
<li>Read the row or column starting from the current cell using
windows+rightArrow / windows+downArrow</li>
</ul>
<p>目前支持的表格有:</p>
<ul>
<li>浏览模式(Internet Explorer、 Firefox等)。</li>
<li>Microsoft Word 文档。</li>
</ul>
<h2>快捷键</h2>
<ul>
<li>开关简易导航模式(未分配),开启后,您可以使用四个光标键进行表格导航。</li>
</ul>
<h2>Changes for 2.4</h2>
<p>For this release, many thanks goes to Cyrille Bougot for his work.</p>
<ul>
<li>Table navigation fixed in MS Word</li>
<li><p>Introduce new commands following changes in NVDA 2022.2 and 2022.4</p>
<ul>
<li>home/end/pgUp/pgDown to jump to start/end of row/column</li>
<li>control+left/right/up/downArrow to jump to start/end of row/column
(alternative shortcut key for the same result)</li>
<li>NVDA+left/up to read the whole row/column starting from the first cell
without moving the current position of the cursor</li>
<li>NVDA+right/down for sayAll in row/column, i.e. read the cells of the
current row/column, starting from the current cell and moving the
cursor's position while reading until the last cell of the row/column.</li>
</ul>
</li>
<li><p>Remaped some keys to avoid conflicts:</p>
<ul>
<li>NVDA+upArrow/leftArrow becomes windows+upArrow/leftArrow (to read full
column/row)</li>
<li>NVDA+downArrow/rightArrow becomes windows+downArrow/rightArrow (say
all in column/row)</li>
</ul>
</li>
<li><p>Compatibility with NVDA 2023.1</p></li>
</ul>
<h2>Changes for 2.3</h2>
<ul>
<li>It is now possible to disable table navigation layer from everywhere</li>
<li>Compatibility with NVDA 2022.1</li>
<li>Fix error when reloading the addon</li>
</ul>
<h2>版本 2.2.1</h2>
<ul>
<li>修复了某些类型的文档(包括 Word 和 Outlook)中的错误</li>
</ul>
<h2>版本 2.2</h2>
<ul>
<li>使用插件模板更新文档样式</li>
<li>首个可翻译版本</li>
</ul>
<h2>版本 2.1.1</h2>
<ul>
<li>更新 manifest 文件和文档中的作者信息</li>
</ul>
<h2>版本 2.1</h2>
<ul>
<li>兼容 NVDA 2021.1</li>
</ul>
<h2>版本2.0</h2>
<ul>
<li>需要NVDA 2019.3或更高版本。</li>
<li>使插件的各种语言条目可翻译。</li>
</ul>
<h2>版本1.2</h2>
<ul>
<li>内部更改,为支持新版 NVDA 做准备。</li>
</ul>
<h2>版本1.1</h2>
<ul>
<li>修复了在Outlook中拼写检查邮件时可能会抛出错误的问题。</li>
</ul>
<h2>版本1.0</h2>
<ul>
<li>发布初始版本。</li>
</ul>
NVDA 时钟插件http://addons.nvda-project.org/addons/clock.zh_CN.html2024-02-13T14:37:41Z2015-03-27T20:43:09Z
<ul>
<li>Authors: Hrvoje Katić, Abdel and NVDA contributors</li>
<li><p>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=clock">稳定版</a></p></li>
<li><p>NVDA 兼容性:2019.3 及更高版本</p></li>
</ul>
<p>NVDA 的时钟插件。</p>
<p>借助这个插件,您可以让 NVDA 以 Windows
默认时间格式以外的格式读出日期时间。此外,您还可以查看当前年份、已过天数或周数,以及本年的剩余天数,还能够按照指定的间隔播报时间。插件还具备提醒和秒表计时器功能,您可以为某些任务计时或设置提醒(如复制文件、安装程序或做饭等)。</p>
<p>注:</p>
<ul>
<li>如果您正在安装的插件高于先前版本,在安装过程中,安装向导会检测旧配置是否与新配置兼容,并可以进行相应的自动更正,在此过程中您只需确认即可。</li>
<li>在 Windows 10 及以后版本的操作系统上,您可以使用闹钟和提醒应用程序来管理秒表和计时器。</li>
</ul>
<h2>键盘命令</h2>
<ul>
<li>NVDA+F12:读出当前时间</li>
<li>NVDA+F12 连按两次:读出当前日期</li>
<li>NVDA+F12 连按三次:读出当前日期,周数、年份及本年的剩余天数</li>
<li>NVDA+Shift+F12:打开时钟命令面板</li>
</ul>
<h2>未分配的命令</h2>
<p>以下命令默认没有分配快捷键;如果您想为这些命令分配快捷键,请在按键与手势对话框内添加。打开 NVDA
菜单,选项,找到“按键与手势”。展开时钟类别,然后选择要分配快捷键的命令,点击“添加”按钮,按下您想分配的快捷键即可。</p>
<ul>
<li>读出距离下一个提醒的时间。连按两次取消。</li>
<li>停止当前响铃。</li>
<li>显示提醒设置对话框。</li>
</ul>
<h2>命令面板</h2>
<p>要使用命令面板,请先按NVDA + Shift + F12,然后按下相应功能的对应快捷键:</p>
<ul>
<li>s : 启动、重置或停止秒表</li>
<li>r : 重置秒表但不重新开始</li>
<li>A: 读出距离下依次提醒的已经过时间和剩余时间。</li>
<li>t: 显示提醒设置对话框。</li>
<li>c : 取消下一个提醒</li>
<li>空格 : 读出当前秒表或上次计时器的时间</li>
<li>p : 停止响铃(如果响铃时间过长)</li>
<li>h : 读出时钟命令面板中的可用命令</li>
</ul>
<h2>设置和使用</h2>
<p>要设置时钟插件的功能,请打开 NvDA 菜单、选项、设置,然后在时钟面板设置以下选项:</p>
<ul>
<li>时间和日期显示格式:使用这两个组合框来设置当您分别快速按 NVDA+F12 一次或两次时 NVDA 应该如何读出时间和日期。</li>
<li>报时间隔:在此组合框中选择报时间隔(关闭、每 10 分钟、15 分钟、30 分钟或每小时)。</li>
<li>报时方式(如果报时间隔未关闭则该设置有效):在语音和音效、只有音效或只有语音之间进行选择。</li>
<li>时钟铃声(如果报时间隔未关闭则该设置有效):选择时钟铃声。</li>
<li>免打扰时段(仅在“报时间隔”组合框中未选择“关闭”选项时才可见)允许您设置不自动报时的时间范围。</li>
<li>免打扰时段时间格式:选择免打扰时段的显示方式(12 小时制或 24 小时制)。</li>
<li>免打扰时段的开始和结束时间:从小时和分钟组合框中选择免打扰时段的开始和结束时间点。</li>
</ul>
<p>要设置提醒,请打开 NVDA 菜单,工具,设置提醒,设置对话框内包括:</p>
<ul>
<li>倒计时单位:在小时、分钟和秒之间选择用于设置倒计时提醒的时间单位。</li>
<li>倒计时时间:根据以上所选的单位输入相应的时间。</li>
<li>铃声:选择提醒时播放的铃声。</li>
<li>停止和暂停按钮:停止或暂停较长的铃声预览。</li>
</ul>
<p>点击“确认”,随后会显示一个对话框告诉您提醒开始的时间。</p>
Newfon-NVDA俄语,乌克兰语合成器http://addons.nvda-project.org/addons/newfon.zh_CN.html2024-02-13T14:37:13Z2015-02-25T03:21:40Z
<ul>
<li>Authors: Sergey Shishmintsev, Alexy Sadovoi, Sergey A.K.A. Electrik, Kvark
and other developers</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=newfon">稳定版</a></li>
<li>NVDA Compatibility: 2019.2 to 2023.1</li>
</ul>
<h3>About</h3>
<p>Newfon is a speech synthesizer that supports Russian and Ukrainian for the
first time since its release. Later Croatian, Polish and Serbian were added.</p>
<h3>General features:</h3>
<ul>
<li>Ability to change languages;</li>
<li>Changing the sampling rate;</li>
<li>Sound interpolation to simulate the sound of old DOS screen readers and
book readers;</li>
<li>In order for the synthesizer to read the text as it is written, it is
possible to disable the built-in accent dictionary. Option works only for
Russian language;</li>
<li>The synthesizer, in addition to the main rate from 0 to 100%, supports
additional speech acceleration, which reduces the time of reading the
text;</li>
<li>To get a smoother reading at high speeds, it is possible to adjust the
pauses between phrases.</li>
</ul>
<h3>Note:</h3>
<p>Numerous versions of Newfon have been released since it was first published
on the NVDA official add-ons site, but unfortunately the lead developer
Sergey Shishmintsev died, which delayed the update of the synthesizer on the
site.</p>
<p>In 2017, the current developers of the Newfon speech synthesizer had the
opportunity to get the source codes for Sergey's developments. His
relatives, thanks to whom this happened, set them only one condition: if the
development of his projects continues, they must become free.</p>
<p>The developers, in turn, decided that history should not forget Sergey
Shishmintsev, as he was a unique programmer with an enormous amount of
perseverance, hard work and knowledge.</p>
<h2>Changelog</h2>
<h3>Version 2023.3</h3>
<p>The GPL license is back in place of MIT. Now MIT is used for open source
scripts and GPL is used for Newfon speech driver.</p>
<h3>Version 2023.2</h3>
<p>Newfon license changed from GPL to MIT license.</p>
<h3>Version 2023.1</h3>
<ul>
<li>Added compatibility with NVDA 2023.1 (backwards compatibility with NVDA
2019 is still supported);</li>
<li>Added Newfon license agreement in English;</li>
<li>Added documentation in Russian.</li>
</ul>
<h3>Version 2022.04.16</h3>
<p>Compatible with NVDA 2022 (Backward compatibility with NVDA 2019.2 is still
supported.).</p>
<h3>Version 2021.06.06</h3>
<p>For compatibility with later versions of NVDA, the lastTestedNVDAVersion
value has been changed.</p>
<h3>Version 2021.03.19</h3>
<p>For compatibility with subsequent versions of NVDA, the internal mechanisms
for the interaction of the synthesizer with NVDA drivers have been changed.</p>
<h3>Version 2021.01.16</h3>
<h4>Added:</h4>
<p>speech.BreakCommand - This feature is required by some add-ons to pause
speech for a while.</p>
<h4>Fixed:</h4>
<p>In Ukrainian, some capital letters were not read correctly.</p>
<h3>Version 2020.12.28</h3>
<p>In this version, a significant processing of scripts, restructuring of the
add-on, new languages (test opportunity) and much more was made.</p>
<h4>Added:</h4>
<ul>
<li>New languages: Croatian, Polish, Serbian. These scripts were taken from
open sources and provided by beta testers. The author cannot be
responsible for the operation of these scripts, so you use them as is -
without any guarantees;</li>
<li>Some old Russian characters have been added to the Russian language: "і":
"и десятеричное", "ѣ": "ять", "ѳ": "фита", "ѵ": "ижица", "ў": "у краткое",
"ґ": "гэ взрывное". Accordingly, if you read the old Russian word, it will
be read correctly;</li>
<li>Sound interpolation. Now you can imitate the sound of a newfon, just like
in the old DOS screen readers and book readers. To implement this feature,
the libsamplerate library is used;</li>
<li>Now you can turn off reading decimal fractions (only for Russian and
Ukrainian), which improves the reading of program versions.</li>
</ul>
<h4>Changed:</h4>
<ul>
<li>The add-on has been completely reworked. now all the code is not in one
<strong>init</strong>.py file, which makes maintaining the code and adding new
languages much easier;</li>
<li>Queues from DLLs have been ported to Python, which has a good effect on
the stability of the add-on.</li>
</ul>
<h4>Fixed:</h4>
<p>Sound out of sync bug that occasionally appeared on the latest versions of
NVDA.</p>
<h3>Version 2020.09.12</h3>
<h4>Changed:</h4>
<p>Due to a change in the way the audio subsystem works In new alpha versions
of NVDA, the sample rate was not switched properly.</p>
<h3>Version 2020.03.12</h3>
<h4>Added:</h4>
<ul>
<li>At the request of users, an optional ability has been added for English
pronunciation, instead of the sound е, pronounce the sound э - like in the
old add-ons;</li>
<li>Now the add-on has localization, accordingly, on the Ukrainian NVDA
interface, all additional parameters will be displayed in the
corresponding language.</li>
</ul>
<h4>Changed</h4>
<ul>
<li>Thanks to the programmer Kvark, the internal architecture of the add-on
was rewritten to the third Python;</li>
<li>For fans of non-standard voices, the list of sampling frequencies has been
expanded.</li>
</ul>
Dual Voice-NVDA多语音合成器支持插件http://addons.nvda-project.org/addons/dualvoice.zh_CN.html2023-05-10T20:38:33Z2015-02-17T22:28:44Z
<ul>
<li>作者: Mahmood Taghavi.</li>
<li>下载 <a href="https://sourceforge.net/projects/dualvoice/files/latest/download">稳定版</a></li>
</ul>
<p>此插件允许您使用两个合成器或声音以您选择的方式来朗读文本。有关此插件的更多信息,请阅读[附加自述文件]。<a href="https://mahmood-taghavi.github.io/dual_voice/">2</a></p>
剪辑内容设计器http://addons.nvda-project.org/addons/clipContentsDesigner.zh_CN.html2024-03-10T17:40:19Z2014-12-13T09:43:18Z
<ul>
<li>作者: Noelia, Abdel。</li>
</ul>
<p>此插件用于向剪贴板添加文本,当您希望将文本部分连接在一起以准备粘贴时,这可能很有用。剪贴板内容也可以清除或者用浏览模式逐字逐句查看。</p>
<h2>键盘快捷键</h2>
<ul>
<li>NVDA+windows+c: 将选定的文本,表示MathML对象的Unicode盲文字符或已使用浏览光标标记的字符串添加到剪贴板.</li>
<li>NVDA+windows+x: 清除剪贴板内容.</li>
<li>未分配:复制到剪贴板(或从剪贴板剪切),并跳出确认框。</li>
<li>Not assigned: Shows the clipboard text as HTML in browse mode, or
announces if clipboard is empty or has contents which can't be presented
in a browseable message, for instance if files or folders are been copied
from Windows Explorer.</li>
<li>Not assigned: Shows the textual clipboard contents as plain text in browse
mode, or announces if clipboard is empty or has contents which can't be
presented in a browseable message, for instance if files or folders are
been copied from Windows Explorer.</li>
</ul>
<h2>Clip Contents Designer settings</h2>
<p>This panel is available from NVDA's menu, Preferences submenu, Settings
dialog.</p>
<p>It contains the following controls:</p>
<ul>
<li>Type the string to be used as a separator between contents added to the
clipboard: Allows to set a separator which can be used to find the text
segments once the entire added text is pasted.</li>
<li>Add text before clip data: It's also possible to choose if the added text
will be appended or prepended.</li>
<li>Select the actions which require previous confirmation: You can choose,
for each action available, if it should be performed inmediately or after
confirmation. Available actions are: add text, clear clipboard, emulate
copy and emulate cut.</li>
<li>Request confirmation before performing the selected actions when: You can
select if confirmations will be requested always, just if text is
contained in the clipboard, or if clipboard is not empty (for example if
you've copied a file, not text).</li>
<li>Format to show the clipboard text as HTML in browse mode: If you're
learning HTML markup language, you may choose Preformatted text in HTML or
HTML as shown in a web browser, to have an idea of how your HTML code will
be rendered by NVDA in a browser. The difference between preformatted and
conventional HTML is that the first option will preserve consecutive
spaces and line breaks, and the second one will compact them. For
example, write some HTML tags like h1, h2, li, pre, etc., select and copy
the text to clipboard, and use clipContentsDesigner add-on to show the
text in a browseable message.</li>
<li>Maximum number of characters when showing clipboard text in browse mode:
Please, be aware that increasing this limit may produce issues if the
clipboard contains large strings of text. The default limit is 100000
characters.</li>
<li>Restore defaults.</li>
</ul>
<p>注意:</p>
<ul>
<li>当NVDA的消息框仍然打开时,将不会请求确认。在这些情况下,将立即执行操作。</li>
<li>Emulate copy and emulate cut commands mean that, when these features are
enabled, the add-on will take control of control+c and control+x. This
will allow to select if a confirmation should be requested before
performing the actions corresponding to these keystrokes.</li>
</ul>
<h2>Changes for 22.0.0</h2>
<ul>
<li>Added a button to restore defaults in the add-on settings panel.</li>
<li>The add-on cannot be run in secure mode.</li>
</ul>
<h2>Changes for 17.0</h2>
<ul>
<li>Compatible with NVDA 2023.1.</li>
</ul>
<h2>Changes for 16.0</h2>
<ul>
<li>Reqires NVDA 2022.1 or later.</li>
</ul>
<h2>Changes for 15.0</h2>
<ul>
<li>The command to add text to clipboard is again presented in the input
gestures dialog.</li>
<li>Fixed gestures to copy and cut with Persian keyboard, thanks to
Mohammadhosein Ghezelsofla.</li>
</ul>
<h2>Changes for 14.0</h2>
<ul>
<li>Compatible with NVDA 2021.1.</li>
</ul>
<h2>Changes for 13.0</h2>
<ul>
<li>Fixed an issue in visual layout of the settings panel, thanks to Cyrille
Bougot.</li>
<li>Improved documentation.</li>
<li>Added a Clip Contents Designer category to assign input gestures to all
commands available for this add-on.</li>
<li>Fixed bugs when using emulate copy in browsers if focus mode is active.</li>
<li>You can assign different gestures to show the clipboard textual contents
as raw text or formatted in HTML. The Format to show the clipboard text in
the settings panel has being modified accordingly, to select the two
options available for HTML format.</li>
</ul>
<h2>版本 12.0</h2>
<ul>
<li>修复了在 LibreOffice Writer 等应用程序中使用模拟复制时的错误。</li>
</ul>
<h2>版本11.0</h2>
<ul>
<li>现在可以使用 NVDA (NVDA_f9 和 NVDA_f10) 的标准命令添加带有浏览光标标记的文本。NVDA_windows_f9
不再使用,以便更好地与新的 NVDA_shift_f9 命令集成。</li>
<li>需要NVDA 2019.3或更高版本。</li>
</ul>
<h2>版本10.0</h2>
<ul>
<li>修复了用于显示剪贴板文本的对话框中的错误,当其标题包含非拉丁字符时。</li>
<li>修复阿拉伯语键盘使用剪辑内容设计器的错误。已由Abdel修复,有插件作者添加。</li>
</ul>
<h2>版本9.0</h2>
<ul>
<li>新增了在浏览模式下显示剪贴板文本的功能。</li>
<li>添加了一个选项,用于选择在剪贴板不为空时追加内容时是否需要确认,例如,剪贴板里面已有复制的文件或文件夹。</li>
<li>需要NVDA 2018.4或更高版本。</li>
</ul>
<h2>版本8.0</h2>
<ul>
<li>插件设置显示在NVDA设置对话框的相应类别中。</li>
<li>需要NVDA 2018.2或更高版本。</li>
<li>假如需要用旧版本,您可以下载<a href="https://www.nvaccess.org/addonStore/legacy?file=ccd-o">与NVDA 2017.3兼容的旧版本</a>。</li>
</ul>
<h2>版本7.0</h2>
<ul>
<li>在安装时配置模拟复制和模拟剪切功能的对话框中,如果选择否,将删除这些功能的命令,以便您可以恢复control + c和control +
x的正常行为。</li>
</ul>
<h2>版本6.0</h2>
<ul>
<li>Added options to choose if available actions should be performed after
confirmation.</li>
<li>Added Emulate copy and Emulate cut commands, which could be assigned from
the Input gestures dialog.</li>
<li>Added a dialog to configure the Emulate copy and Emulate cut
functionalities at installation. This allows to add the control+c and
control+x commands to copy and cut, and be asked if you want to replace
the clipboard contents when pressing these keystrokes.</li>
<li>Fixed documentation for script_add (Windows+NVDA+c).</li>
</ul>
<h2>版本5.0</h2>
<ul>
<li>对话框的视觉呈现得到了增强,并且遵循NVDA中显示的对话框的外观。</li>
<li>需要NVDA 2016.4或更高版本。</li>
</ul>
<h2>版本4.0</h2>
<ul>
<li>插件设置由NVDA配置管理,因此标准配置文件可用于保存不同的分隔符,并且不需要在重新安装时复制导入设置。</li>
<li>现在,可以使用“剪辑内容设计器”设置对话框中的“添加剪辑前数据”复选框,选择是添加还是添加文本。</li>
</ul>
<h2>版本3.0</h2>
<ul>
<li>如果安装了MathPlayer,则可以将MathML对象的盲文表示添加到剪贴板。</li>
<li>如果未设置分隔符,则只会在添加的文本段之间放置一行。</li>
<li>可以指定快捷键来打开“剪辑内容设计器”设置对话框。</li>
<li>在设置对话框中添加了一个复选框,用于选择是否应复制分隔符以在重新安装插件时导入。</li>
</ul>
<h2>版本2.0</h2>
<ul>
<li>印地语字符可以用作添加内容之间的分隔符。</li>
</ul>
<h2>版本1.0</h2>
<ul>
<li>发布初始版本。</li>
</ul>
触摸屏增强插件-Enhanced Touch Gestureshttp://addons.nvda-project.org/addons/enhancedTouchGestures.zh_CN.html2023-07-15T02:39:11Z2014-12-06T20:33:40Z
<ul>
<li>作者: Joseph Lee</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=enhancedTouchGestures">稳定版</a></li>
<li>NVDA 兼容性:2022.4 及更高版本</li>
</ul>
<p>此插件为 NVDA 提供了更多的触摸屏支持手势。其中包括一组浏览模式导航手势。</p>
<p>注意:此插件需要在具备触摸屏的 Windows 10 或 11 的计算机上运行,并且需要 NVDA 2022.3 或更高版本。</p>
<h2>命令</h2>
<h3>随处可用</h3>
<ul>
<li>4指双击:切换输入帮助模式。</li>
<li>四指向右滑动:切换触摸键盘(通常启用)。</li>
<li>四指向左滑动:切换听写(Windows+H;Windows 10 版本 1709 或更高版本)。</li>
</ul>
<h3>对象导航模式</h3>
<ul>
<li>3指向下滑动:读取当前窗口。</li>
<li>3指向左滑动:读出具有焦点的对象。</li>
<li>3指向右滑动:读出当前导航对象。</li>
<li>4指向上滑动:读出当前窗口标题。</li>
<li>4指向下滑动:读出状态栏文本。</li>
</ul>
<h2>网页触摸模式</h2>
<p>此触摸模式(在浏览模式下可用)支持按元素导航。要从浏览模式文档切换到
Web模式,可以使用3指点击。在该模式下,用一个手指向上或向下轻扫,循环切换可用于导航的元素,随后用一个手指向右或向左清扫,根据切换到的元素分别移动到下一个或上一个。退出浏览模式后,则使用对象导航模式。</p>
<h2>语音设置模式</h2>
<p>您可以在此模式下快速更改语音合成器设置,例如选择语音和调节音量。在此模式下,使用两个手指向左或向右滑动以在合成器设置之间切换,然后使用两个手指向上和向下清扫来更改相应设置的值。该手势对应于键盘上的语音循环切换。</p>
<h2>版本 23.02</h2>
<ul>
<li>需要 NVDA 2022.4 或更高版本。</li>
<li>需要 Windows 10 21H2(2021 年 11 月更新/内部版本 19044)或更高版本。</li>
</ul>
<h2>版本23.01</h2>
<ul>
<li>现在需要NVDA 2022.3或更高版本。</li>
<li>需要 Windows 10 或更高版本,因为自 2023 年 1 月起,Microsoft 不再支持 Windows 8.1。</li>
<li>可以从按键与手势对话框中触摸手势增强类别下重新分配触摸键盘和听写切换命令。</li>
<li>删除了触摸键盘键的只读状态解决方法,已在 Windows 10 中得到解决。</li>
</ul>
<h2>版本 22.03</h2>
<ul>
<li>现在需要NVDA 2021.3或更高版本。</li>
<li>试图在 Windows 7、8 和 8.1 上安装插件时将会显示一条警告消息。</li>
</ul>
<h2>版本 21.10</h2>
<ul>
<li>由于 NVDA 的更改对本插件的影响,您需要使用 NVDA 2021.2 或更高版本。</li>
</ul>
<h2>版本21.08</h2>
<ul>
<li>对 Windows 11 的初步支持。</li>
</ul>
<h2>版本21.01</h2>
<ul>
<li>现在需要NVDA 2020.3或更高版本。</li>
<li>在 Windows 10 版本 1709 及更高版本上,四指向左滑动可切换听写模式 (即 Windows+H)。</li>
<li>从插件中删除专用的触摸支持命令。</li>
<li>由于 NVDA 本身支持了触摸交互设置,故此插件删除了设置面板的相关选项。</li>
</ul>
<h2>版本20.09</h2>
<ul>
<li>删除了让 NVDA 关闭触摸交互10秒(以直接传递触摸命令)的功能。</li>
<li>删除了坐标通知提示音功能。</li>
</ul>
<h2>版本20.07</h2>
<ul>
<li>添加了切换启用/禁用触摸 (Ctrl+Alt+NVDA+T) 的键盘命令。</li>
<li>由于 NVDA 2020.1 及更高版本包含用于执行鼠标右键单击(单指点击并按住)的触摸命令,该命令已从此插件中删除。因此,需要 NVDA
2020.1 或更高版本。</li>
<li>让 NVDA 关闭触摸交互10秒(以直接传递触摸命令)的功能已被弃用。将来,此功能使用切换触摸交互代替。</li>
<li>在 NVDA 开发快照中,由于触摸交互功能的变化,触摸命令传递功能和增强的触摸手势设置面板将被禁用。用于启用触摸命令传递的命令将改为切换触摸交互。</li>
<li>坐标通知提示音功能已弃用,并将在未来的附加版本中删除。</li>
<li>使用触摸键盘时不会听到坐标通知提示音。</li>
<li>在通过触摸探索现代输入工具(例如表情符号面板)时,NVDA 将不在没有提示或播放错误提示音。</li>
<li>如果无法激活触摸键盘(四指向右滑动),NVDA 将显示错误消息。</li>
</ul>
<h2>版本20.06</h2>
<ul>
<li>使用 Flake8 解决了许多编码样式问题和潜在错误。</li>
</ul>
<h2>版本20.04</h2>
<ul>
<li>鼠标右键单击手势(一个手指点击并按住)现在是 NVDA 2020.1 的一部分。</li>
</ul>
<h2>版本20.01</h2>
<ul>
<li>现在需要NVDA 2019.3或更高版本。</li>
<li>如果完全关闭触摸支持,则触摸支持切换命令(包括触摸传递)将不再起作用。</li>
</ul>
<h2>版本19.11</h2>
<ul>
<li>为其他触摸命令添加输入帮助消息。</li>
</ul>
<h2>版本19.09</h2>
<ul>
<li>触摸支持现在可以从任何地方禁用,而不仅仅是从配置文件以外的正常配置文件。</li>
</ul>
<h2>版本19.07</h2>
<ul>
<li>内部更改以支持未来的NVDA版本。</li>
</ul>
<h2>版本18.12</h2>
<ul>
<li>内部更改以支持未来的NVDA版本。</li>
</ul>
<h2>版本18.08</h2>
<ul>
<li>兼容NVDA 2018.3和未来版本。</li>
</ul>
<h2>版本18.06</h2>
<ul>
<li>现在,“增强触摸手势”的设置已整合进NVDA新版设置。因此,需要NVDA 2018.2。</li>
<li>修复了wxPython 4的兼容性问题。</li>
</ul>
<h2>版本18.04</h2>
<ul>
<li>解决了NVDA设置面板中的触摸交互类别可能导致由于此插件所做的更改而听到错误声音的问题。</li>
</ul>
<h2>版本18.03</h2>
<ul>
<li>现在需要NVDA 2018.1。</li>
<li>由于NVDA 2018.1带有触摸输入复选框,因此此插件中不再包含该复选框。</li>
</ul>
<h2>版本17.12</h2>
<ul>
<li>现在需要NVDA 2017.4。具体来说,此插件现在可以处理配置文件切换。</li>
<li>由于NVDA 2017.4包含屏幕方向通知,因此此功能不再是此插件的一部分。</li>
<li>在“触摸交互”对话框中添加了一个隐藏复选框,以完全禁用触摸支持(如果正常配置以外的配置文件处于活动状态。</li>
<li>如果使用NVDA 2018.1或更高版本,则“触摸交互”对话框将在NvDA的选项菜单下列出两次。第二项是插件随附的对话框。</li>
<li>在插件的“触摸交互”对话框中,如果使用NVDA 2018.1或更高版本,则不再显示触摸键入模式。</li>
</ul>
<h2>版本17.10</h2>
<ul>
<li>由于Microsoft的支持策略,不再支持Windows 8(原始版本)。</li>
<li>运行NVDA 2017.4开发快照时,NVDA将不再宣布屏幕方向两次。</li>
</ul>
<h2>版本17.07.1</h2>
<ul>
<li>在触摸交互对话框中添加了一个选项,可以在不使用计时器的情况下手动切换触摸直通。</li>
<li>关闭手动直通模式后,如果在直通持续时间到期之前打开触摸直通,则会启用触摸交互。</li>
</ul>
<h2>版本17.07</h2>
<ul>
<li>在NVDA的首选项菜单下添加了一个名为Touch Interaction的新对话框,以配置NVDA如何与触摸屏配合使用。</li>
<li>安装此版本后,按下触摸键盘上的按键时,必须双击所需的按键。您可以通过在“触摸交互”对话框中启用触摸键入来切换回旧方法。</li>
<li>添加了一个命令(未分配),允许NVDA忽略触摸手势长达10秒。</li>
<li>在“触摸交互”对话框中添加了一个选项,允许NVDA暂停3到10秒之间的触摸交互,以便直接执行触摸屏手势(就像NVDA未运行;默认为5秒)。</li>
<li>在执行右键单击(点击并按住)以记录在NVDA日志中时需要添加调试日志消息(需要NVDA 2017.1或更高版本)。</li>
<li>由于在播放屏幕坐标时所做的更改,需要NVDA 2017.1或更高版本。</li>
</ul>
<h2>版本 17.03</h2>
<ul>
<li>修复了使用NVDA 2017.1或更高版本时未播放坐标公告蜂鸣声或播放错误音的问题。</li>
</ul>
<h2>版本 16.12</h2>
<ul>
<li>Web触摸模式适用于Microsoft Edge,Microsoft Word和其他使用浏览模式的模式。</li>
<li>为web触摸模式元素添加了列表和标记。</li>
</ul>
<h2>版本16.06</h2>
<ul>
<li>发布初始版本。</li>
</ul>
NV Speech Player. A Klatt-based speech synthesis engine written in c++http://addons.nvda-project.org/addons/nvSpeechPlayer.zh_CN.html2023-05-10T20:38:33Z2014-08-26T09:28:59Z
<ul>
<li>Author: NV Access Limited</li>
<li>Download <a href="https://www.nvaccess.org/addonStore/legacy?file=nvsp">NV Speech Player for NVDA 2019.3 or higher</a></li>
</ul>
<h2>简介</h2>
<p>NV Speech
Player是一款免费的开源原型语音合成器,可供NVDA使用。它使用Klatt合成生成语音,使其有点类似于,Dectalk和Eloquence。</p>
<h2>许可和版权</h2>
<p>NV Speech Player is Copyright (c) 2014 NV Speech Player contributors NV
Speech Player is covered by the GNU General Public License (Version 2). You
are free to share or change this software in any way you like as long as it
is accompanied by the license and you make all source code available to
anyone who wants it. This applies to both original and modified copies of
this software, plus any derivative works. For further details, you can view
the license online at: http://www.gnu.org/licenses/old-licenses/gpl-2.0.html</p>
<h2>背景</h2>
<p>70年代和80年代在语音合成方面进行了大量的研究。出现的最突出的合成模型之一是称为Klatt合成的共振峰频率合成。一些着名的Klatt合成器是Dectalk和Eloquence。它们非常适合盲人使用,因为它们反应速度快,发音平滑且可预测,并且内存占用小。然而,研究很快转向了其他方向,例如连词,尽管这种情况比较慢,但它更接近于人类的声音。这对于在诸如GPS单元或电话系统之类的主流应用中的使用是有利的,但对于盲人来说不一定有这么大的优势,盲人往往更关心响应性和对速度和可预测性。</p>
<p>虽然Dectalk和Eloquence等合成器继续维持并可用近20年,但现在它们变得越来越难以获取,多家公司表示这些及其变体已经终止并且不再更新。</p>
<p>随着速度和平滑性的提高,协同合成现在开始有了不少的替代品。然而,大多数(如果不是全部)可接受的质量合成器都是商业的并且相当昂贵。</p>
<p>Dectalk和Eloquence都是闭源商业产品。但是,社区可以获得大量有关Klatt综合的源代码和研究资料。
NV语音合成器试图通过成为Klatt合成器的现代原型来利用这一点,希望能够替代像Dectalk或Eloquence这样的合成器,或者至少重新开始围绕这种合成方法的研究和进行开发。</p>
<p>eSpeak合成器本身就是一个免费的开源产品,已被证明可以替代社区中的一定数量的语音合成器,但许多听到它的人非常快地指出它的“金属”声音,似乎无法继续使用它。虽然NV
Speech
Player的作者仍然更喜欢eSpeak作为他们选择的合成器,但他们仍然希望能够更好地理解这种对eSpeak的奇怪抵抗究竟是为什么,这可能与eSpeak的频谱合成与Klatt合成有关。它也可能与辅音也是从记录的语音中收集的事实有关,因此可以被感知为被注入语音流中。</p>
<h2>工具</h2>
<p>The synthesis engine itself is written in C++ using modern idioms, but
closely following the implementation of klsyn-88, found at
http://linguistics.berkeley.edu/phonlab/resources/</p>
<p>eSpeak is used to parse text into phonemes represented in IPA, making use of
existing eSpeak dictionary processing. eSpeak can be found at:
http://espeak.sourceforge.net/</p>
<p>The Klatt formant data for each individual phoneme was collected mostly from
a project called PyKlatt: http://code.google.com/p/pyklatt/ However it has
been further tweaked based on testing and matching with eSpeak's own data.</p>
<p>音素长度,间隙,速度和语调的规则已经在Python中手动编码,尽管尝试尽可能地复制eSpeak自己的语调数据。</p>
<h2>构建NV语音合成器</h2>
<p>You will need: - Python 3.7: http://www.python.org - SCons 3:
http://www.scons.org/ - Visual Studio 2019 Community</p>
<p>构建:运行scons</p>
<p>构建之后,根目录中将有一个nvSpeechPlayer_xxx.nvda-addon文件,其中xxx是git修订版或硬编码版本号。将此插件安装到NVDA中将允许您在NVDA中使用语音合成器合成器。请注意您需要的所有内容都在插件中,不需要复制额外的dll或文件。</p>
Quick Books 2014支持http://addons.nvda-project.org/addons/quickBooks2014.zh_CN.html2023-05-10T20:38:33Z2014-04-07T06:10:41Z
<ul>
<li>作者:NV Access Limited,在My Blind Spot,Intuit和社区测试人员的帮助下。</li>
<li>下载:<a href="https://www.nvaccess.org/addonStore/legacy?file=qb-dev">版本2014.4.7</a></li>
</ul>
<p>此插件可以将NVDA与Intuit Quickbooks 2014会计软件配合使用。</p>
<h2>功能</h2>
<ul>
<li>自动启用QuickBooks辅助功能模式。</li>
<li>标记许多输入编辑框。</li>
<li>跟踪焦点并突出显示诸如会计科目表之类的列表。</li>
<li>正确控制类型识别自定义复选框,单选按钮和按钮。</li>
<li>在自定义消息对话框中自动朗读消息。</li>
</ul>
TeamViewer远程支持插件http://addons.nvda-project.org/addons/teamViewer.zh_CN.html2024-02-13T14:36:04Z2014-02-01T21:30:34Z
<ul>
<li>Authors: Noelia Ruiz Martínez, Mesar Hameed.</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=tv">稳定版</a></li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=tv-dev">开发板</a></li>
</ul>
<p>这个插件提高了NVDA对TeamViewer的可访问性。</p>
<p>它基于由同一作者开发的TeamViewerNVDASupport插件。您应该卸载旧的插件组件来使用此插件,因为两者都具有常见的快捷键和功能。</p>
<p>测试<a href="https://www.teamviewer.com">TeamViewer</a> 9,试用版。</p>
<h2>快捷键:</h2>
<ul>
<li>nvda + shift + C:将ID和当前密码复制到剪贴板,以便在需要远程控制时可以通过聊天粘贴和发送它们。</li>
<li>control+tab and control+shift+tab: 切换到TeamViewer主对话框中的其他选项卡.</li>
</ul>
<h2>版本2.0</h2>
<ul>
<li> 插件帮助可从插件管理器获得。</li>
</ul>
<h2>版本1.0</h2>
<ul>
<li> 发布初始版本。</li>
</ul>
Bit Che-bt支持插件http://addons.nvda-project.org/addons/bitChe.zh_CN.html2023-05-10T20:38:33Z2013-12-06T10:30:33Z
<ul>
<li>作者: Alberto Zanella, Alberto Buffolino和其他贡献者。</li>
<li>下载<a href="https://www.nvaccess.org/addonStore/legacy?file=bc">稳定版本</a></li>
<li>下载<a href="https://www.nvaccess.org/addonStore/legacy?file=bc-dev">开发版</a></li>
</ul>
<p>Bit Che 是一个简单的、用来搜索 BT 种子文件的工具。您可以从<a href="https://www.convivea.com">这里</a>获取此程序的信息。</p>
<p>此 NVDA 的插件可提高该软件的可访问性,添加的特性如下:</p>
<ul>
<li>使搜索结果列表可访问。</li>
<li>支持使用应用程序键激活焦点结果上的上下文菜单。</li>
</ul>
<h2>注意</h2>
<ul>
<li>您可以使用“上/下”光标键进行搜索结果的导航。</li>
<li>在启动 Bit Che 后执行首次搜索时,第一个结果将被拒交,它可能未被选择。 NVDA
将朗读那些选中的结果,在执行任何操作之前,请先使用普通的快捷键或者光标键选择正确的项目。</li>
</ul>
<h2>快捷键</h2>
<ul>
<li>Application键或者Shift加F10,打开搜索结果项目的上下文菜单。</li>
</ul>
<h2>版本2.0</h2>
<ul>
<li>插件帮助可从插件管理器获得。</li>
</ul>
<h2>版本1.5</h2>
<ul>
<li>更新翻译。</li>
</ul>
<h2>版本1.4</h2>
<ul>
<li>增加开发板的下载链接。</li>
</ul>
<h2>版本1.3</h2>
<ul>
<li>增加卸载功能,确定是否安装有旧的版本,然后卸载。</li>
</ul>
<h2>版本1.2</h2>
<ul>
<li>增加快捷键 Shift加F10和Application键,在 VM 下非常实用。</li>
</ul>
<h2>版本1.1</h2>
<ul>
<li>提高搜索结果页的可访问性。</li>
</ul>
<h2>版本1.0</h2>
<ul>
<li>初始版本。</li>
</ul>
Read Feeds-NVDA-RSS阅读插件http://addons.nvda-project.org/addons/readFeeds.zh_CN.html2024-02-13T14:37:07Z2013-11-16T13:45:30Z
<ul>
<li>Authors: Noelia Ruiz Martínez, Mesar Hameed</li>
</ul>
<p>此插件提供了一种使用NVDA以Atom或RSS格式读取订阅源的简单方法。 Feed不会自动刷新。下面我们提到feed时,我们指的是RSS和ATOM提要。</p>
<h2>快捷键</h2>
<h3>Read Feeds dialog</h3>
<p>You can access the Read Feeds dialog from the nvda menu, Tools submenu,
Feeds item.</p>
<p>It contains the following controls:</p>
<ul>
<li>过滤条件:用于搜索以前保存的feed的编辑框。</li>
<li>已保存的Feeds列表,在对话框打开时集中显示。</li>
<li>文章列表:打开一个对话框,显示当前Feed中的文章列表。选择要阅读的文章,然后按Enter或打开所选文章的网页按钮,在浏览器中打开相应的页面。按关于文章按钮打开一个对话框,显示所选文章的标题和链接;在此对话框中,您将能够将此信息复制到剪贴板。</li>
<li>打开feed:在默认应用程序中打开所选feed。</li>
<li>以HTML格式打开Feed。在默认的网络浏览器中打开选定的feed。您将能够显示或隐藏出版日期和按钮来复制文章信息到剪贴板。</li>
<li>复制馈送地址。打开一个对话框,确认是否要将feed地址复制到剪贴板。</li>
<li>新建:打开带有编辑框的对话框,以输入新Feed的地址。如果地址有效且可以保存Feed,则其名称(基于Feed标题)将显示在Feed列表的底部。</li>
<li>重命名:打开一个带有编辑框的对话框,以重命名所选的源。</li>
<li>删除:打开确认后删除所选feed的对话框。</li>
<li>设置默认值:将选定的Feed设置为默认值,以便可以使用NVDA的快捷键访问其文章。</li>
<li>Import feeds from OPML file: Opens a dialog to add new feeds from an OPML
file.</li>
<li>Save feeds to OPML file: Opens a dialog to save the feeds available from
the Feeds dialog in an OPML file.</li>
<li>首选项。打开readFeeds的设置对话框,也可在NVDA的菜单 "首选项"、"设置"、"readFeeds "类别中使用。</li>
<li>关闭:关闭“源”对话框。</li>
</ul>
<h3>Notes</h3>
<ul>
<li>通过编辑框过滤可以放在NVDA的菜单、首选项、设置、读取feeds类别的打开文章按钮之后,或者按Feeds对话框的首选项按钮。</li>
<li>This panel has an option to show article dates on the List of articles
dialog.</li>
</ul>
<h3>键盘快捷键</h3>
<ul>
<li>Ctrl + Shift + NVDA + Space:朗读当前文章的URL。按两次将打开网页。</li>
<li>Ctrl + Shift + NVDA + 8:刷新选定的Feed并朗读其最新的标题。</li>
<li>Ctrl + Shift + NVDA + I:朗读当前RSS源的标题和链接。按两次将标题和相关链接复制到剪贴板。</li>
<li>Ctrl + Shift + NVDA + U:朗读当前源的上一个的标题。</li>
<li>Ctrl + Shift + NVDA + O:朗读当前源的下一个标题。</li>
</ul>
<h2>通知</h2>
<ul>
<li>复制标题或URL时。</li>
<li>无法连接/刷新Feed时,或者URL与有效Feed不对应。</li>
<li>NVDA will display an error message if a new feed cannot be created.</li>
<li>“文章列表”对话框的标题显示所选的源名称和可用项目数。</li>
</ul>
<h2>Changes for 21.0</h2>
<ul>
<li>Feeds with untitled articles can be presented in the Articles dialog, and
opened as HTML.</li>
</ul>
<h2>Changes for 20.0</h2>
<ul>
<li>universalFeedParser is updated to 5.0.1, adding support for more feeds.</li>
</ul>
<h2>Changes for 14.0</h2>
<ul>
<li>Fixed a bug that made impossible to add some feeds.</li>
</ul>
<h2>Changes for 13.0</h2>
<ul>
<li>The add-on cannot be used on secure screens.</li>
<li>Feeds are managed from OPML files.</li>
<li>Due to changes in the feeds management system, there are changes in the
configuration file where the default feed is set. Please, use the Feeds
dialog if you want to set it again.</li>
<li>Your old text files used in previous versions will be automatically
imported into the new OPML format when the add-on is started.</li>
<li>The copy and restore feeds feature has been replaced with the ability to
import from and save to OPML files.</li>
<li>Non well-formed feeds can be processed before being added to make them
compatible with the add-on.</li>
<li>In the Read Feeds settings panel, a new option allows to show article
dates on the List of articles dialog.</li>
</ul>
<h2>版本12.0</h2>
<ul>
<li>修复了导致 NVDA 工具菜单项的快捷方式无法按预期工作的错误。</li>
</ul>
<h2>版本11.0</h2>
<ul>
<li>兼容 NVDA 2021.1</li>
</ul>
<h2>版本10.0更新日志</h2>
<ul>
<li>增加了一个按钮,在默认的网页浏览器中以HTML形式打开选定的feed。</li>
<li>如果不能创建新的feed,将在错误对话框中通知。</li>
<li>改进一些条款的顺序和表述方式。</li>
<li>可以支持更多的feed。</li>
<li>当打开Feeds对话框时,Feeds列表将被关注,而不是搜索编辑框。</li>
<li>您可以选择是否将搜索编辑框放在Feeds列表之后,这对于在不关闭Feeds对话框的情况下从另一个窗口切换时聚焦列表非常有用。</li>
<li>在feeds对话框中添加了将feed地址复制到剪贴板的按钮。</li>
</ul>
<h2>版本9.0</h2>
<ul>
<li>需要NVDA 2019.3或更高版本。</li>
</ul>
<h2>版本8.0</h2>
<ul>
<li>更新插件后,除非您更喜欢导入保存在NVDA主配置文件夹中的feed,否则将保存在以前版本的插件中的提要将自动复制到新版本。</li>
<li>使用对话框复制供稿时,如果所选文件夹未命名为personalFeeds,则将创建具有此名称的子文件夹,以防止删除包含重要数据的目录,例如“文档”或“下载”。</li>
</ul>
<h2>版本7.0</h2>
<ul>
<li>"源" 对话框中包含一个按钮, 用于打开可能包含源备份的文件夹。</li>
<li>使用编辑框筛选源时, 如果未找到任何结果, 则会禁用源和其他控件的列表, 以便 NVDA 不会在空列表中朗读 "未知"。</li>
<li>如果无法显示文章对话框列表 (例如, RSS的摘要有错误), 直接报错, 这样可以在不重新启动 NVDA 的情况下继续使用RSS源对话框。</li>
</ul>
<h2>版本6.0</h2>
<ul>
<li>当默认RSS源已更新并且由于服务器问题而停止工作时,之前的文章不会被删除,并且可以使用相应的按键进行读取。</li>
<li>修复错误:默认RSS源可以更新两次了。</li>
</ul>
<h2>版本5.0</h2>
<ul>
<li>文章列表对话框已得到增强。</li>
<li>兼容NVDA 2018.3或更高版本(必需)。</li>
<li>如果需要,您可以下载<a href="https://www.nvaccess.org/addonStore/legacy?file=rf-o">与NVDA 2017.3兼容的最新版本</a>。</li>
</ul>
<h2>版本4.0</h2>
<ul>
<li>添加了一个按钮,可以从“源”对话框中打开所选的源。</li>
</ul>
<h2>版本3.0</h2>
<ul>
<li>管理订阅源文件的对话框已被删除。现在,他们的功能包含在“源”对话框中。</li>
<li>对话框的可视化表示已得到增强,符合NVDA中显示的对话框的外观。</li>
<li>默认配置保存在NVDA的配置中。因此,可以在配置配置文件中设置不同的默认源。</li>
<li>需要NVDA 2016.4。</li>
</ul>
<h2>版本2.0</h2>
<ul>
<li>插件管理器提供了插件帮助。</li>
</ul>
<h2>版本1.0</h2>
<ul>
<li>发布初始版本。</li>
</ul>
GoldWave 支持插件http://addons.nvda-project.org/addons/goldwave.zh_CN.html2023-05-10T20:38:33Z2013-11-04T09:15:31Z
<ul>
<li>作者: Joseph Lee, NVDA contributors.</li>
<li>下载<a href="https://www.nvaccess.org/addonStore/legacy?file=goldwave">稳定版</a></li>
<li>NVDA compatibility: 2022.4 and later</li>
</ul>
<p>此插件可增强GoldWave音频编辑器的无障碍体验性。</p>
<h2>快捷键</h2>
<ul>
<li>NVDA+Shift+C: 在音频编辑过程中切换朗读命令。</li>
<li>Control+Shift+P: 报告当前的轨道位置。</li>
<li>NVDA+Shift+R: 报告当前编辑曲目的剩余时间。</li>
<li>Control+NVDA+1: 报告您正在编辑的通道。</li>
<li>Control+NVDA+2: 报告音频文件的总长度。</li>
<li>Control+NVDA+3: 读出音频选择信息的摘要。</li>
<li>Control+NVDA+4: 报告缩放级别。</li>
</ul>
<p>有关GoldWave和键盘命令的更多信息,请参阅GoldWave手册。</p>
<p>注意:现在需要 GoldWave 6或更高版本。</p>
<h2>Version 23.02</h2>
<ul>
<li>NVDA 2022.4 or later is required.</li>
<li>Windows 10 21H2 (November 2021 Update/build 19044) or later is required.</li>
</ul>
<h2>Version 23.01</h2>
<ul>
<li>NVDA 2022.3 or later is required.</li>
<li>Windows 10 or later is required as Windows 7, 8, and 8.1 are no longer
supported by Microsoft as of January 2023.</li>
</ul>
<h2>版本22.03</h2>
<ul>
<li>需要NVDA 2021.3或更高版本。</li>
<li>当试图在 Windows 7、8和8.1上安装插件时,将显示一条警告消息。</li>
</ul>
<h2>版本21.10</h2>
<ul>
<li>NVDA 2021.2或更高版本是必需的,因为 NVDA 的更改会影响此插件。</li>
<li>在 GoldWave 6.57及更高版本中,按下播放/回放/停止键时,NVDA 将不再重复加载文件的名称。</li>
</ul>
<h2>版本21.06</h2>
<ul>
<li>使用 Flake8 解决了许多编码样式问题和潜在错误。</li>
</ul>
<h2>版本20.06</h2>
<ul>
<li>使用 Flake8 解决了许多编码样式问题和潜在错误。</li>
</ul>
<h2>版本20.04</h2>
<ul>
<li>添加了有关restig time命令(NVDA + Shift + R)的输入帮助消息。</li>
<li>切换命令 (NVDA_Shift_C) 现在显示在 NVDA 的输入手势对话框中的"GoldWave"分类下。</li>
</ul>
<h2>版本20.01</h2>
<ul>
<li>需要NVDA 2019.3或更高版本。</li>
</ul>
<h2>版本19.11</h2>
<ul>
<li>现在需要Windows 7 SP1,GoldWave 6.x和NVDA 2019.1或更高版本。</li>
<li>新增了声音窗口的帮助消息(如果安装了Control Usage Assistant插件,则可以使用)。</li>
</ul>
<h2>版本18.12</h2>
<ul>
<li>现在在将某些命令通知设置为关闭的情况下执行某些GoldWave命令时,NVDA将不再显示任何操作或发出错误提示音(在某些情况下,这可能会导致异常行为)。</li>
<li>内部更改以支持将来的NVDA版本。</li>
</ul>
<h2>版本18.07</h2>
<ul>
<li>修复了尝试获取轨道的剩余时间时不会显示前导零的问题。</li>
</ul>
<h2>版本17.05</h2>
<ul>
<li>增加了在启用调试日志记录的情况下运行NVDA时提供调试信息的功能,注意: 这需要(NVDA 2017.1或更高版本)。</li>
<li>更新翻译。</li>
</ul>
<h2>版本16.12</h2>
<ul>
<li>版本方案现在是year.month而不是major.minor。</li>
</ul>
<h2>版本4.0</h2>
<ul>
<li>附加存储库已转移到GitHub(现在位于 https://github.com/josephsl/goldwave).</li>
<li>现在查找诸如通道名称,和其他状态信息之类的信息时性能得到改善。</li>
</ul>
<h2>版本3.0</h2>
<ul>
<li>增加了一条命令来报告当前曲目的剩余时间(NVDA+Shift+R)。</li>
<li>报告通道信息等状态信息时略有改进。</li>
</ul>
<h2>版本2.0</h2>
<ul>
<li>支持GoldWave 6,包括64位版本的GoldWave(请参阅上面的注释)。</li>
<li>现在可以从插件管理器(NVDA 2014.3及更高版本)访问插件帮助。</li>
<li>如果按左声道的Control + Shift + L等声道选择命令,NVDA现在会报告选定的声道。</li>
<li>数字编辑字段中的各种问题(如审查字段和混合对话框中的时间选择器)已得到修复,包括选择文本,更新值等。</li>
<li>当切换到其他程序时,命令通知设置将被记住。</li>
</ul>
<h2>版本1.2</h2>
<ul>
<li>修复了NVDA难以公布一些编辑字段的问题。</li>
<li>新的更新和翻译。</li>
<li>请注意,由于近期NVDA的变化,音频选择和其他状态命令在某些系统中可能无法按预期工作。</li>
</ul>
<h2>版本1.1</h2>
<ul>
<li>支持盲文中的消息通告。</li>
<li>音频选择摘要以英语以外的语言显示。</li>
<li>添加了更多命令通告,包括提示位置移动和删除/修剪操作。</li>
<li>修复了数字编辑字段中的问题,例如各种效果对话框中没有任何字段名称或错误字段名称被宣布。</li>
<li>新的更新和翻译。</li>
</ul>
<h2>版本1.0</h2>
<ul>
<li>发布初始版本。</li>
</ul>
表情符号插件http://addons.nvda-project.org/addons/emoticons.zh_CN.html2024-03-10T17:55:46Z2013-10-21T09:28:36Z
<ul>
<li>Authors: Chris Leo, Noelia Ruiz Martínez, Mesar Hameed, Francisco Javier
Estrada Martínez</li>
</ul>
<p>启用表情名称朗读来代替原字符朗读。</p>
<p>例如:序列“:)”将被称为“微笑表情”,或者例如NVDA将识别每个表情符号的正确含意。</p>
<p>您可以利用以下功能:</p>
<h2>插入表情</h2>
<p>Sometimes an image is worth a 1000 words: use the new emoji to liven up your
instant message and to let your friends know how you’re feeling.</p>
<p>如果您不确定特定表情的字符,可以使用此插件选择并将其插入到你的文本,例如聊天编辑框。</p>
<p>按NVDA+I键,或从菜单工具->表情符号>插入表情符号,打开提供表情符号或表情符号的对话框。</p>
<p>此对话框允许您选择表情符号并浏览您感兴趣的表情符号:</p>
<ul>
<li>可编辑字段允许您在可用的表情符号中过滤搜索所需表情符号。</li>
<li>通过一组单选按钮,您可以选择仅查看表情符号类别(alt + E)或仅查看标准表情符号类别(alt + s)或查看所有可用的表情符号(alt +
A)。</li>
<li>表情符号列表(alt + L)分别显示在三列上:表情符号的名称,表情符号的类型(标准表情符号或表情符号),相应的字符。</li>
</ul>
<p>按确认后,所选表情符号的字符将被复制到剪贴板,准备粘贴。</p>
<h2>插入符号</h2>
<p>This dialog allows you to choose one of the symbols available in the
Punctuation/symbol pronunciation dialog of NVDA. You can use the Filter edit
box or the arrow keys to select an item from the symbols list.</p>
<p>If you want to copy various symbols, use the Add button to append them to
the Symbols to copy edit box.</p>
<p>Then, press OK and the selected emoji or symbol, or the symbols contained in
the mentioned edit box, will be copied to your clipboard, ready for pasting.</p>
<h2>Associate gestures to symbols</h2>
<p>From NVDA's menu, Preferences submenu, Input gestures dialog, category
Insert symbols, you can configure NVDA to type symbols through associated
gestures.</p>
<p>You can use the Edit field edit box to reduce the number of symbols
presented, so that this category can be expanded faster.</p>
<h2>表情词典</h2>
<p>表情符号插件允许使用配置文件使用不同的语音词典。</p>
<p>这意味着您可以为每个自定义配置文件创建或编辑特定的语音字典。</p>
<p>从NVDA菜单,首选项 - >语音词典 - >表情词典,您可以打开一个对话框来添加或编辑可用的表情。</p>
<p>保存自定义项,表情符号的新阅读设置仅适用于您当前正在编辑的配置文件。</p>
<p>例如,您可能希望NVDA仅在XxChat程序中使用自定义表情符号,而不是在其他聊天程序中:您可以通过为XxChat应用程序创建配置文件并从语音词典菜单中分配语音词典,表情符号词典选项来完成此操作。请参阅下面有关配置配置文件的表情符号设置。</p>
<p>您还可以按“保存并导出词典”按钮导出每个自定义语音词典:这样您的语音词典将保存在您的用户配置文件夹,speechDicts /
emoticons子文件夹中。</p>
<p>字典文件的确切名称和位置将基于编辑配置配置文件,该配置文件将显示在“表情符号”字典对话框的标题中。</p>
<h2>表情符号设置</h2>
<p>从菜单首选项 - >设置 - >表情符号打开一个面板,为每个配置文件配置语音词典的激活。</p>
<p>在“表情符号设置”面板中,您可以选择在NVDA切换到当前正在编辑的配置文件时是否应自动激活语音字典。默认情况下,它在NVDA的正常配置和所有新配置文件中都被禁用。</p>
<p>此外, 还可以确定是否应该读出插件内的表情。如果在 NVDA 的配置中包含表情符号, 这可能会很有用。</p>
<p>如果您可能希望保持清洁配置目录,则在此对话框中还可以选择是否在卸载时从插件中删除未使用的字典(与非现有配置文件关联)。</p>
<h2>快捷键:</h2>
<p>这些是默认情况下可用的常见快捷键,您可以编辑这些快捷键或添加新键以打开“表情符号”设置面板或“表情词典”对话框:</p>
<ul>
<li>NVDA + E:开启/关闭表情符号朗读。</li>
<li>NVDA + I:显示对话框,用于选择要复制的表情。</li>
<li>未分配:显示一个对话框来选择你要复制的NVDA的符号。</li>
<li>未分配: 打开显示浏览光标所在位置的符号的可浏览消息, 以便可以在浏览模式下浏览整个描述。</li>
<li>未分配: 打开显示插入符号所在位置的符号的可浏览消息, 以便可以在浏览模式下查看整个描述。</li>
</ul>
<p>Note: On Windows 10 and higher, it's also possible to use the built-in emoji
panel.</p>
<h2>Changes for 22.0.0</h2>
<ul>
<li>Requires NVDA 2023.2 or later.</li>
</ul>
<h2>Changes for 17.0</h2>
<ul>
<li>Added ability to associate gestures to type symbols.</li>
<li>Added ability to copy various symbols at the same time.</li>
</ul>
<h2>Changes for 16.0</h2>
<ul>
<li>Compatible with NVDA 2023.1.</li>
</ul>
<h2>Changes for 15.0</h2>
<ul>
<li>Requires NVDA 2022.1 or later.</li>
<li>Cannot be used in secure mode.</li>
</ul>
<h2>14.0更新日志</h2>
<ul>
<li>兼容 NVDA 2021.1或更高版本。</li>
</ul>
<h2>13.0更新日志</h2>
<ul>
<li>修正了插入表情符号对话框中的错误。</li>
<li>在NVDA的标点符号/符号发音中增加了一个插入可用符号的对话框。</li>
</ul>
<h2>版本 12.0</h2>
<ul>
<li>需要NVDA 2019.3或更高版本。</li>
</ul>
<h2>版本 11.0</h2>
<ul>
<li>更新插件后,保存在以前版本插件中的词典将自动复制到新版本,除非您更喜欢导入保存在NVDA主词典文件夹中的词典。</li>
<li>当显示插入符号或浏览光标所在的符号时,单词Character和Replacement用于区分符号本身及其在浏览模式下的描述,对语音用户有用。</li>
</ul>
<h2>10.0更新日志</h2>
<ul>
<li>添加了命令, 以显示浏览光标或插入符号所在的符号。可以从 "输入手势" 对话框 "文本浏览分类分配这些命令的手势。</li>
</ul>
<h2>9.0更新日志</h2>
<ul>
<li>新增选择是否应该朗读插件内的表情。</li>
<li>对字典名称使用适当的编码, 在错误包含某些字符时修复错误。</li>
<li>插件的翻译摘要被正确地用于插件帮助中提供的标题, 可从插件管理器访问。</li>
<li>添加了一个提示, 其中提到了 Windows 10 上提供的表情符号面板。</li>
</ul>
<h2>8.0更新日志</h2>
<ul>
<li>兼容NVDA 2018.3或更高版本(必需)。</li>
</ul>
<h2>7.0更新日志</h2>
<ul>
<li>激活设置对话框已移至NVDA设置,现在配置文件将显示在NVDA设置对话框的标题中。</li>
<li>管理表情符号菜单已被删除:现在可以在“工具”菜单下找到“插入表情符号”,“自定义表情符号”将显示在“表情词典”下的“语音词典”中。</li>
<li>现在需要NVDA 2018.2或更高版本。</li>
<li>如果需要使用旧版本,您可以下载<a href="https://www.nvaccess.org/addonStore/legacy?file=emo-o">与NVDA 2017.3兼容的最新版本</a>。</li>
</ul>
<h2>6.0更新日志</h2>
<ul>
<li>添加了对配置文件的支持。</li>
<li>在NVDA
2017.4或更高版本中,配置设置和自定义词典将根据所选配置文件自动更改。在2017.3或更早版本中,您可以通过重新加载插件来应用更改(按下ctrl+
NVDA + f3)。</li>
<li>如果您在更新插件时选择导入设置,则会删除或已弃用此版本的(emoticons.ini和emoticons.dic)文件。</li>
</ul>
<h2>5.0更新日志</h2>
<ul>
<li>添加了对表情符号的支持。</li>
<li>Insert Emoticon对话框的改进,带有过滤器字段和单选按钮,用于选择显示的表情符号。</li>
<li>使用guiHelper激活设置对话框和插入表情符号对话框:需要NVDA 2016.4或更高版本</li>
</ul>
<h2>4.0更新日志</h2>
<ul>
<li>如果在另一个设置对话框处于活动状态时打开了“插入表情”对话框,NVDA将显示相应的错误消息。</li>
</ul>
<h2>3.0更新日志</h2>
<ul>
<li>根据NVDA 2014.4的语音词典,在“自定义表情符号”对话框中,现在可以指定模式只应匹配,如果它是一个完整的单词。</li>
</ul>
<h2>2.0更新日志</h2>
<ul>
<li>插件管理器现在提供了插件帮助。</li>
</ul>
<h2>1.1更新日志</h2>
<ul>
<li>删除了重复的表情符号。</li>
<li>添加了一些表情。</li>
</ul>
<h2>1.0更新日志</h2>
<ul>
<li>发布初始版本。</li>
</ul>
eMule - 电骡支持插件http://addons.nvda-project.org/addons/eMule.zh_CN.html2024-03-10T18:42:51Z2013-08-04T11:54:04Z
<ul>
<li>作者: Noelia, Chris, Alberto.</li>
</ul>
<p>此插件有助于提高eMule与nVDA的可访问性。它还提供了用于在不同窗口中移动的其他键盘命令,并提供了有关eMule的有用信息。</p>
<p>当前插件基于同一作者开发的eMuleNVDASupport插件。您应该卸载该旧插件以使用此插件,因为两者都有共同的按键和功能。</p>
<p>Tested on <a href="https://www.emule-project.net">eMule</a> 0.50a.</p>
<h2>快捷键:</h2>
<ul>
<li>control+shift+h: 移动鼠标和焦点到”主工具栏。</li>
<li>control+shift+t: 朗读当前窗口。</li>
<li>control+shift+n: 移动焦点到“查找”窗口的“名称”编辑区。</li>
<li>control+shift+p: 切换焦点和鼠标到“搜索”窗口的搜索参数列表和编辑区选项。</li>
<li>control + shift + b:将焦点移动到当前窗口的列表中。例如,可在“搜索”窗口中使用,在“传输”窗口中下载等。</li>
<li>control + shift + o:将焦点移动到当前窗口中的只读编辑框。例如,IRC收到消息,可用服务器等。</li>
<li>control + NVDA + f:如果插入符号位于只读编辑框中,则打开查找对话框以使用命令搜索NVDA中可用的文本。</li>
<li>control+shift+l: 移动鼠标和浏览对象到当前列表的表头。</li>
<li>control+shift+q: 朗读状态栏的第一个对象,提供最近一次活动的信息。</li>
<li>control+shift+w: 朗读状态栏的第二个对象,提供当前服务器的用户和文件的数目信息。</li>
<li>control+shift+e: 查看第三个状态栏的对象,常用来了解上传和下载速度。</li>
<li>control+shift+r: 查看状态栏的第四个对象,用来了解 ED2K 和 KAD 网络的连接情况。</li>
</ul>
<h2>管理列。</h2>
<p>在一个列表内,您可以使用 CTRL加ALT家光标键 在列表的行列之间进行浏览。在此插件,下面的按键也是可用的:</p>
<ul>
<li>nvda+control+1到0: 朗读前十列。</li>
<li>nvda+shift+1到0: 朗读第11到20列。</li>
<li>nvda+shift+C: 拷贝最后一次朗读的那一列的内容到剪贴板。</li>
</ul>
<h2>Changes for 7.0</h2>
<ul>
<li>Compatible with NVDA 2023.1.</li>
</ul>
<h2>版本6.0</h2>
<ul>
<li>需要 NVDA 2022.1 或更高版本。</li>
</ul>
<h2>版本5.0</h2>
<ul>
<li>兼容 NVDA 2021.1。</li>
</ul>
<h2>版本4.0</h2>
<ul>
<li>需要NVDA 2019.3或更高版本。</li>
</ul>
<h2>版本3.0</h2>
<ul>
<li> To search text in the readonly edit boxes, the find dialog can be used,
such as nvda+control+f to activate the find dialog.</li>
</ul>
<h2>版本2.0</h2>
<ul>
<li> 插件管理器现在已提供了插件的帮助。</li>
</ul>
<h2>版本1.2</h2>
<ul>
<li> 当移动到 IRC 消息时,选择的文本内容已可正确的朗读。</li>
<li> 用于移动到搜索结果列表的快捷键已被推广,以便能够将焦点移动到当前窗口中的任何可用列表。</li>
<li> 用于聚焦IRC消息的快捷键已被推广到移动到任何只读编辑框,从而可以在“服务器”窗口中查看连接信息。</li>
<li> 当移动鼠标并将焦点移动到工具栏时,在某些情况下它会被朗读两次。这已得到修复。</li>
</ul>
<h2>版本1.1</h2>
<ul>
<li> 修复在用户配置文件夹名称包含非拉丁字符时 NVDA 帮助菜单下的 eMule 项目,发生的错误。</li>
<li> 现在,可使用“创建手势”对快捷键进行更改。</li>
</ul>
<h2>版本1.0</h2>
<ul>
<li> 初始版本。</li>
</ul>
焦点突出显示 Focus Highlighthttp://addons.nvda-project.org/addons/focusHighlight.zh_CN.html2023-05-10T20:38:33Z2013-08-04T06:59:50Z
<ul>
<li>Authors: Takuya Nishimoto, Karl-Otto Rosenqvist</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=fh">稳定版</a></li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=fh-dev">开发板</a></li>
</ul>
<p>通过绘制一个彩色的矩形,这个插件可以让弱视用户,有视力的教育工作者或开发者跟踪nvda导航器对象的位置和焦点对象/控件。</p>
<p>此插件使用以下颜色:</p>
<ul>
<li>绿色带点虚线,表示NVDA处于浏览模式下,矩形内是当前导航对象。</li>
<li>红色细线围成的矩形,以指示处于焦点的的对象/控件。</li>
<li>红色粗线围成的矩形,表示导航器对象和焦点是重叠的。</li>
<li>蓝色粗虚线围成的长方形,表示NVDA处于模式,即按键类型传递给控件。</li>
</ul>
<p>To toggle object tracking, press NVDA+Alt+P. You can assign other gestures
using the Input Gestures dialog. Note that it works with NVDA 2018.3 or
later. Otherwise, you should disable or uninstall the addon itself for
disabling object tracking.</p>
<p>When Focus Highlight category of NVDA Settings dialog is available,
following items can be used.</p>
<ul>
<li>Make focus mode the default: This checkbox is enabled by default. When it
is unchecked, this add-on behaves same as version 5.6 or previous
versions, i.e., if browse mode is not available for an app, the focus is
shown using the thick red rectangle.</li>
<li><p>Focus in focus mode, Focus in browse mode, Navigator object: Each of these
groups contains Color, Thickness, and Style.</p>
<ul>
<li>Color: This edit field allows you to type the HTML color code, i.e.,
six-character hexadecimal number. For example, "ffffff" is white,
"ff0000" is red, and so on. Note that "000000" can not be used.</li>
<li>Thickness: This edit field allows you to type the thickness of the
box. You can enter a value between 1 and 30.</li>
<li>Style: The choices are Solid, Dash, Dot, Dash dot, and Dash dot-dot.</li>
</ul>
</li>
<li><p>Restore defaults: This button allows you to reset your settings to their
original defaults.</p></li>
</ul>
<h2>Changes for 6.3</h2>
<ul>
<li>更新新的翻译。</li>
<li>Fixed the issue that dash styles of focus (in browse mode) and navigator
object are not able to change.</li>
<li>Fixed the issue that 'Cancel' button of setting panel does not work after
'Restore defaults' button is pressed.</li>
</ul>
<h2>Changes for 6.2</h2>
<ul>
<li>更新新的翻译。</li>
<li>You can now turn object tracking on and off using NVDA+Alt+P. Karl-Otto
Rosenqvist contributed for this.</li>
</ul>
<h2>Changes for 6.1</h2>
<ul>
<li>更新新的翻译。</li>
<li>Addresses <a href="https://github.com/nvdajp/focusHighlight/issues/14">the issue</a>
with the latest development versions of NVDA.</li>
<li>Focus Highlight category of NVDA Settings dialog is now available. Note
that it works only with NVDA 2018.3 or later.</li>
<li><a href="https://github.com/nvdajp/focusHighlight/issues/3">Discussions regarding customizing
colors</a></li>
<li><a href="https://github.com/nvdajp/focusHighlight/issues/13">Discussions regarding 'Make focus mode the
default'</a></li>
</ul>
<h2>6.0更新日志</h2>
<ul>
<li>更新新的翻译。</li>
<li>解决了<a href="https://github.com/nvdajp/focusHighlight/issues/10">与浏览模式有关的这个问题</a></li>
<li>从这个版本开始, 如果应用程序没有浏览模式时, 则始终显示NVDA 处于焦点模式, 而不是使用红色粗边矩形。</li>
<li>表示焦点模式的矩形粗细已减半。</li>
</ul>
<h2>版本5.6</h2>
<ul>
<li>更新新的翻译。</li>
<li>解决NVDA预览版alpha-16682的兼容性问题。</li>
</ul>
<h2>版本 5.5</h2>
<ul>
<li>解决NVDA 2018.4和Firefox / Chrome网络浏览器的问题。</li>
</ul>
<h2>版本 5.4</h2>
<ul>
<li>更新新的翻译。</li>
<li>解决了 <a href="https://github.com/nvdajp/focusHighlight/issues/11">版本兼容标识问题</a>。</li>
</ul>
<h2>版本 5.3</h2>
<ul>
<li>更新新的翻译。</li>
<li>解决了和谷歌浏览器以及应用程序睡眠模式有关的<a href="https://github.com/nvdajp/focusHighlight/issues/10">这个问题</a></li>
</ul>
<h2>版本 5.2</h2>
<ul>
<li>更新新的翻译。</li>
</ul>
<h2>版本 5.1</h2>
<ul>
<li>删除调试日志输出。</li>
</ul>
<h2>版本 5.0</h2>
<ul>
<li>导航器对象和聚焦模式的指示符已更改。</li>
<li>支持多个监视器。</li>
<li>现在使用GDI Plus技术进行绘图。</li>
</ul>
<h2>版本 4.0</h2>
<ul>
<li>如果当前应用程序处于睡眠模式,则隐藏矩形。</li>
</ul>
<h2>版本 3.0</h2>
<ul>
<li>修复了有关插件组合框的问题。</li>
<li>修复了Windows任务管理器的问题。</li>
<li>支持指示对焦模式。</li>
</ul>
<h2>版本 2.1</h2>
<ul>
<li>更新新的翻译。</li>
</ul>
<h2>版本 2.0</h2>
<ul>
<li>插件管理器现在可以查看插件帮助。</li>
</ul>
<h2>版本 1.1</h2>
<ul>
<li>将导航器对象矩形更改为绿色锯齿线。</li>
<li>修复了'重新加载插件'的问题。</li>
</ul>
<h2>版本 1.0</h2>
<ul>
<li>在Internet Explorer 10和Windows 8上的Skype中,修复了导航器对象的问题。</li>
<li>发布初始版本。</li>
</ul>
去除蜂鸣声-noBeepsSpeechModehttp://addons.nvda-project.org/addons/noBeepsSpeechMode.zh_CN.html2023-08-14T13:52:29Z2013-07-16T07:37:13Z
<ul>
<li> 作者: Alberto Buffolino.</li>
<li> 下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=noBeepsSpeechMode">稳定版</a></li>
<li> 下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=noBeepsSpeechMode-dev">开发板</a></li>
</ul>
<p>此插件可去除语音模式下的嘟嘟声。您可以在关闭或朗读之间用NVDA+s进行切换。</p>
<h2>版本2.0</h2>
<ul>
<li> 插件帮助可从插件管理器获得。</li>
</ul>
<h2>版本1.5</h2>
<ul>
<li> 增加了脚本类别(语音)。</li>
<li> 检查不支持社区的插件的旧版本,并在删除之前提示用户。</li>
</ul>
<h2>版本1.4</h2>
<ul>
<li> 从这个版本开始,关于语音模式的消息将自动从NVDA以正确的语言翻译,不需要特殊的插件翻译当然(manifest.ini和脚本文档例外)。</li>
</ul>
<h2>版本1.3</h2>
<ul>
<li> 修复了翻译支持中的错误:添加了python源文件以使字符串可翻译。</li>
</ul>
<h2>版本1.2</h2>
<ul>
<li> 初始版本。</li>
</ul>
虚拟浏览http://addons.nvda-project.org/addons/virtualRevision.zh_CN.html2023-05-10T20:38:33Z2013-07-07T12:36:48Z
<ul>
<li>作者:Rui Batista和NVDA Addon团队</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=virtualRevision">稳定版</a></li>
<li>NVDA兼容版本: 2019.3以上</li>
</ul>
<p>此Addon允许NVDA用户在文本框中查看Window内容,类似于JAWS for
Windows的窗口虚拟化。但请注意,这只是为用户带来的便利,并不能取代NVDA出色的浏览模式和对象导航支持。</p>
<h2>用法</h2>
<p>按下NVDA + control + w打开虚拟修订窗口。然后,像在任何其他文本内容中一样,只需导航显示的文本框。您可以按Escape关闭虚拟修订窗口。</p>
<h2>版本3.0</h2>
<ul>
<li>需要NVDA 2019.3或更高版本。</li>
</ul>
<h2>版本2.3</h2>
<ul>
<li>当前,内部更改以支持以后的NVDA版本。</li>
</ul>
<h2>版本2.2</h2>
<ul>
<li>当窗口最小化或前景窗口没有标题时,NVDA将在显示虚拟浏览窗口时记录这一事实。</li>
</ul>
<h2>版本2.1</h2>
<ul>
<li>虚拟浏览下的屏幕标题将包含在内。</li>
<li>现在可以查看Windows 10中的通用Windows平台(UWP)应用程序和Windows 8.x中现代的应用程序的内容。</li>
<li>在获取现代和通用应用程序的屏幕内容时,会听到哔声以指示虚拟浏览窗口何时准备就绪。</li>
</ul>
<h2>版本2.0</h2>
<ul>
<li>新名称:虚拟浏览。</li>
<li>由于内容显示方式发生变化,因此需要NVDA 2015.2或更高版本。</li>
<li>感谢2015.2及更高版本中的新功能,您现在可以在虚拟化窗口中查找文本。</li>
<li>修复了非控制台窗口的附加功能。</li>
<li>在虚拟控制台窗口的底部删除无用的空白行。</li>
<li>一些小调整。</li>
<li>补充翻译。</li>
</ul>
<h2>版本1.2</h2>
<ul>
<li>支持控制台窗口的虚拟化</li>
</ul>
<h2>版本1.1</h2>
<ul>
<li>转换虚拟查看器未插件。</li>
</ul>
<h2>版本1.0</h2>
<ul>
<li>初始版本</li>
</ul>
<p>\n</p>
位置标记http://addons.nvda-project.org/addons/placeMarkers.zh_CN.html2024-03-10T18:13:36Z2013-06-04T20:10:52Z
<ul>
<li>作者: Noelia, Chris.</li>
</ul>
<p>此插件用于保存和搜索特定的文本字符串或书签。支持 NVDA
浏览模式下的网页或文档。还可以用于保存或搜索多行控件中的文本字符串,在这种情况下,如果不能更新系统光标,相应的字符串将被复制到剪贴板,以便可以使用其他工具进行搜索。该插件将指定的字符串和书签保存到名称基于当前文档的标题和URL的文件中。该插件基于由同一作者开发的SpecificSearch和Bookmark&Search插件更新而来。您如果安装了这些插件,应该先卸载它们以使用该插件,它们具有同样的快捷键和功能。</p>
<h2>快捷键:</h2>
<ul>
<li>control+shift+NVDA+f:
打开一个对话框,其中显示一个编辑框,显示上次保存的搜索;在此对话框中,您还可以从组合框中选择以前保存的搜索,或使用复选框从历史记录中删除选定的字符串。您可以选择编辑框中包含的文本是否会添加到保存文本的历史记录中。最后,从下一组单选按钮中选择一个操作(在下一个搜索,搜索上一个或不搜索之间),并指定NVDA是否进行区分大小写搜索。当你按下确定的时候,NVDA会搜索这个字符串。</li>
<li>control+shift+NVDA+y: 将当前位置保存为书签。如果您想为此书签命名,请在保存之前选中一些文本。</li>
<li>control+shift+NVDA+delete: 删除与此位置相对应的书签。</li>
<li>NVDA+y: 移至下一个书签。</li>
<li>shift+NVDA+y: 移至上一个书签。</li>
<li>未分配: 在浏览模式下显示保存位置标记数据的文件名,不含扩展名。</li>
<li>alt+NVDA+y:
打开一个对话框,其中包含为此文档保存的书签。您可以为每个书签写一个备注;按保存备注保存更改。点删除删除所选书签。点确定移动到当前书签对应的位置。</li>
<li>未分配: 将位置保存为临时书签。</li>
<li>未分配: 移至当前文档的临时书签。</li>
<li>未分配:从光标所在位置处查找下一个匹配项。</li>
<li>从光标所在位置处查找上一个匹配项。</li>
</ul>
<h2>位置标记子菜单 (NVDA + N)</h2>
<p>通过 NVDA 菜单下的“位置标记”子菜单,可以查看:</p>
<ul>
<li>特定搜索文件夹:打开之前保存的特定搜索的文件夹。</li>
<li>书签文件夹:打开已保存书签的文件夹。</li>
<li>备份位置标记:您可以保存书签文件夹的副本。</li>
<li>恢复位置标记:您可以从先前保存的位置标记文件夹中恢复您的书签。</li>
</ul>
<p>注意:书签位置基于字符数量来确定,因此,在动态页面中,最好使用特定搜索,而不是书签。</p>
<h2>Changes for 35.0</h2>
<ul>
<li>Removed URL parameters from file names, so that bookmarks are valid for
specific websites in different sessions.</li>
</ul>
<h2>版本 24.0</h2>
<ul>
<li>在 NVDA+k、NVDA+shift+k、NVDA+alt+k 和 NVDA+control+shift+k 等手势中使用 Y 代替 k。</li>
<li>兼容 NVDA 2023.1。</li>
</ul>
<h2>版本23.0</h2>
<ul>
<li>恢复对 Word 的支持。</li>
</ul>
<h2>版本22.0</h2>
<ul>
<li>感谢 Abdel,插件目前支持在启用 UIA 的情况下移动到书签,删除书签。</li>
</ul>
<h2>版本21.0</h2>
<ul>
<li>感谢 Abdel,在基于 Chromium 的浏览器中启用 UIA 的情况下,支持保存书签。</li>
</ul>
<h2>版本20.0</h2>
<ul>
<li>需要NVDA 2022.1 或更高版本。</li>
</ul>
<h2>版本 19.0</h2>
<ul>
<li>该插件无法在安全屏幕上运行。</li>
</ul>
<h2>版本18.0</h2>
<ul>
<li>查看placeMarkers的路径的命令显示是否有永久书签、特定搜索的文本或当前文档的临时书签。</li>
</ul>
<h2>版本17.0</h2>
<ul>
<li>修复了不允许在某些文档中保存位置标记的错误。</li>
<li>修正了翻译字符串,使翻译能够正常工作。</li>
</ul>
<h2>版本16.0</h2>
<ul>
<li>兼容 NVDA 2021.1 或更高版本(必需)。</li>
<li>移动到临时书签时支持略读。</li>
<li>如果需要,您可以下载<a href="https://github.com/nvdaes/placeMarkers/releases">其他版本</a>。</li>
</ul>
<h2>版本15.0</h2>
<ul>
<li>在浏览模式下使用全文朗读进行阅读时,根据 NVDA 2020.4
中的查找下一个和查找上一个命令,如果启用了在全文朗读模式下启用快捷键导航选项,则特定查找下一个和特定查找上一个命令不再停止阅读。</li>
<li>在运行特定的“查找上一个”命令后打开“特定搜索”对话框时,将选择“搜索上一个”选项。</li>
</ul>
<h2>版本14.0</h2>
<ul>
<li>当前,复制将要保存位置标记数据的文件名的命令,已被在浏览模式下显示该文件名的命令所代替。注意当前没有分配手势。</li>
<li>“现在要搜索的文本”字段不再与“已保存的文本”字段重叠。 (感谢Cyrille Bougot)。</li>
<li>需要NVDA 2019.3或更高版本。</li>
</ul>
<h2>版本13.0</h2>
<ul>
<li>添加了未分配的命令,以查找为任何特定文档搜索的最后一个文本的下一个和上一个匹配项。</li>
<li>当NVDA的“关于”对话框打开时,特定搜索功能将起作用。</li>
<li>在“特定搜索”对话框中,如果为上次搜索选择了此选项,则将检查区分大小写复选框。</li>
<li>更新插件后,保存在早期插件版本中的特定搜索的书签和字符串将自动复制到新版本,除非您希望导入保存在NVDA主配置文件夹中的位置标记。</li>
<li>使用对话框复制位置标记时,如果所选文件夹未命名为placeMarkersBackup,则将创建具有此名称的子文件夹,以防止删除包含重要数据的目录,例如“文档”或“下载”。</li>
</ul>
<h2>版本12.0</h2>
<ul>
<li>修复了在尝试打开Notes对话框时导致NVDA崩溃的严重BUG,如果在保存书签之前选择了中文字符。</li>
</ul>
<h2>版本11.0</h2>
<ul>
<li>兼容NVDA 2018.3或更高版本(必需)。</li>
<li>如果需要,您可以下载<a href="https://www.nvaccess.org/addonStore/legacy?file=pm-o">与NVDA 2017.3兼容的最新版本</a>。</li>
</ul>
<h2>版本10.0</h2>
<ul>
<li>在Edge中,与书签选择相关联的手势(例如NVDA + k,NVDA + shift + k或NVDA + alt +
k)将被发送至应用程序,而不是尝试将光标移至书签,以避免错误,特别是在长时间的文档。</li>
<li>现在在Edge中支持特定的搜索。</li>
</ul>
<h2>版本9.0</h2>
<ul>
<li>从Notes对话框移动到书签时,浏览光标跟随系统光标。</li>
<li>用于选择上一个书签的命令再次正常工作。</li>
<li>书签可以从Notes对话框中删除。</li>
<li>现在您可以分配手势来保存并移动到每个文档的临时书签。</li>
</ul>
<h2>版本8.0</h2>
<ul>
<li>从书签文件名中删除片段标识符,这可以避免VitalSource书架ePUB阅读器中的问题。</li>
<li>添加了一个Notes对话框,为保存的书签关联注释并移动到选定的位置。</li>
</ul>
<h2>版本7.0</h2>
<ul>
<li>已删除用于保存特定搜索的文本字符串的对话框。此功能现已包含在特定搜索对话框中,该对话框已重新设计,以便在按下“确定”按钮时允许执行不同的操作。</li>
<li>对话框的视觉表现已得到增强,并遵循NVDA中显示的对话框的外观。</li>
<li>在浏览模式下执行“查找下一个”或“查找上一个”命令现在可以正确执行区分大小写的搜索(如果原始查找区分大小写)。</li>
<li>需要NVDA 2016.4或更高版本。</li>
<li>现在,您可以指定手势以打开“复制和还原位置标记”对话框。</li>
<li>当位置标记已被复制或恢复时,NVDA将显示一条消息以通知相关对话。</li>
</ul>
<h2>版本6.0</h2>
<ul>
<li>当插件功能不可用时,会将手势发送到相应的应用程序。</li>
</ul>
<h2>版本5.0</h2>
<ul>
<li>新增区分大小写的搜索。</li>
<li>删除了从位置标记菜单打开文档的选项。</li>
<li>更直观的快捷键。</li>
</ul>
<h2>版本4.0</h2>
<ul>
<li>从书签文件名中删除片段标识符,这可以避免ePUBREADER Firefox插件中的问题。</li>
<li>插件帮助可从插件管理器获得。</li>
</ul>
<h2>版本3.1</h2>
<ul>
<li>更新新的翻译和语言。</li>
<li>书千位置未在脱脂阅读中公布。</li>
</ul>
<h2>版本3.0</h2>
<ul>
<li>增加了对脱脂阅读的支持。</li>
</ul>
<h2>版本2.0</h2>
<ul>
<li>添加了用于保存和删除每个文件的不同搜索的选项。</li>
<li>修复了当路径包含非拉丁字符时破坏的错误。</li>
<li>现在可以使用NVDA手势输入对话框重新分配快捷键。</li>
</ul>
<h2>版本1.0</h2>
<ul>
<li>发布初始版本。</li>
<li>翻译为:巴西葡萄牙语,波斯语,芬兰语,法语,加利西亚语,德语,意大利语,日语,韩语,尼泊尔语,葡萄牙语,西班牙语,斯洛伐克语,斯洛维尼亚语,泰米尔语。</li>
</ul>
Control Usage Assistant-控件使用助理http://addons.nvda-project.org/addons/controlUsageAssistant.zh_CN.html2024-03-24T15:56:56Z2013-05-10T07:46:45Z
<ul>
<li>Author: Joseph Lee, Noelia Ruiz Martínez</li>
</ul>
<p>借助此插件可了解如何与当前所聚焦的控件进行交互。例如,当聚焦到复选框、编辑框时,按 NVDA+H 来获取一段有关于使用当前控件的简短帮助。</p>
<p>转到 NVDA 菜单、选项子菜单、设置、控件使用助理类别来设置该插件:</p>
<ul>
<li>自动提示焦点控件帮助信息(默认选中)</li>
<li>针对可激活对象的帮助:您可以键入一条短消息,用以提示默认或您自定义的手势,从而或知在对象导航过程中按下 NVDA+enter
等手势时当前对象是否具有默认操作。</li>
<li>选择自动帮助信息的输出方式:在此复选框列表可以选择语音和盲文。</li>
<li>输出自动帮助信息时的音高变化:该下拉组合框可以让您设置输出自动帮助信息时的音高变化,(从 -30 到 +30)。</li>
</ul>
<h2>Version 20240324.0.0</h2>
<ul>
<li>Improved support for edit controls and suggestions.</li>
</ul>
<h2>版本 2023.02.19</h2>
<ul>
<li>为可点击对象设置的帮助信息会在其他的属性之后读出。</li>
<li>兼容 NVDA 2023.1。</li>
</ul>
<h2>版本 2022.07.10</h2>
<ul>
<li>添加了为对象导航设置帮助信息的功能,以指示当前对象是否可被激活。</li>
</ul>
<h2>版本 2022.03.27</h2>
<ul>
<li>需要 NVDA 2022.1 或更高版本。</li>
</ul>
<h2>自动读出焦点帮助(默认选中)</h2>
<p>键入可激活对象时要使用的消息:您可以包含一条短消息,指示默认或您配置的手势,以了解在对象导航中按下 NVDA+enter 等手势时当前对象是否具有关联操作。
针对可激活对象的帮助:您可以键入一条短消息,用以提示默认或您自定义的手势,从而或知在对象导航过程中按下 NVDA+enter 等手势时当前对象是否具有默认操作。
选择自动消息的输出模式:此复选框列表允许选择语音和盲文。
选择自动帮助的消息输出方式:在此复选框列表可以选择语音和盲文。
自动焦点控件帮助(默认选中)
选择自动帮助的输出方式:在此复选框列表可以选择语音和盲文。
改进了对浏览模式下请求消息的支持。
需要 NVDA 2022.1 或更高版本。
添加了为对象导航设置消息的功能,以宣布当前对象是否可以被激活。
Noelia Ruiz Martínez
下载【稳定版】[1](兼容NVDA 2022.1及以后版本)
下载【开发版】[2](兼容NVDA 2022.1及以后版本)
版本 2022.07.10
版本 2022.03.27
版本 22.01</p>
<ul>
<li>添加了自动提示焦点控件帮助的功能。</li>
<li>改进了在浏览模式下获取帮助信息的支持。</li>
</ul>
<h2>版本 21.10</h2>
<ul>
<li>由于对 NVDA 的更改会影响此插件,因此需要 NVDA 2021.2 或更高版本。</li>
</ul>
<h2>版本 20.10</h2>
<ul>
<li>帮助信息支持以英语以外的语言显示。</li>
</ul>
<h2>版本 20.06</h2>
<ul>
<li>使用 Flake8 解决了许多编码风格问题和潜在的错误。</li>
<li>修复了尝试获取某些浏览模式控件的帮助时, NVDA 不执行任何操作或只播放错误提示音的 Bug。</li>
</ul>
<h2>版本 20.01</h2>
<ul>
<li>需要NVDA 2019.3或更高版本。</li>
</ul>
<h2>版本 3.0/19.11</h2>
<ul>
<li>版本方案现在为year.month。</li>
<li>现在按下NVDA + H时,将显示帮助屏幕,而不是显示提示信息。</li>
</ul>
<h2>版本 2.5</h2>
<ul>
<li>兼容Python 3。</li>
</ul>
<h2>版本 2.1</h2>
<ul>
<li>新添加和更新的翻译。</li>
</ul>
<h2>版本 2.0</h2>
<ul>
<li>增加更多控件的帮助信息,包括终端窗口(命令提示符)。</li>
<li>增加一些应用程序的窗口区域帮助信息,如Microsoft Excel、Powerpoint和Windows 8 的开始屏幕。</li>
<li>在虚拟文档中增加浏览模式和焦点模式下的帮助信息,包括Internet Explorer、 Adobe Reader 、Mozilla
Firefox等。</li>
<li>新的语言:丹麦语。</li>
</ul>
<h2>版本 1.0</h2>
<ul>
<li>发布初始版本。</li>
</ul>
资源监控器http://addons.nvda-project.org/addons/resourceMonitor.zh_CN.html2024-03-23T17:00:30Z2013-03-03T14:32:05Z
<ul>
<li>作者: Alex Hall, Joseph Lee, Kefas Lungu, Beqa Gozalishvili, Tuukka Ojala,
Ethin Probst 和其他NVDA贡献者</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=resourceMonitor">稳定版</a></li>
<li>NVDA 兼容性:2022.4 及更高版本</li>
</ul>
<p>该插件可读出 CPU 负载,内存使用情况和其他资源使用信息。</p>
<h1>快捷键</h1>
<p>All commands support speech on demand mode (NVDA 2024.1 and later).</p>
<ul>
<li>NVDA+Shift+E: 读出内存的使用率、CPU 平均负载和电池信息(如果可用)。</li>
<li>NVDA+Shift+1: 读出每个 CPU 核心的负载和平均负载。</li>
<li>NVDA+Shift+2/5: 读出物理内存和虚拟内存的容量和使用情况。</li>
<li>NVDA+Shift+3: 读出此计算机上所有驱动器的文件系统和空间使用情况。</li>
<li>NVDA+Shift+4: 读出电量、充电状态、剩余时间(如果没有充电)且在电量不足时发出警告。</li>
<li>NVDA+Shift+6:读出 CPU 架构以及 Windows 版本和 Service Pack 编号。</li>
<li>NVDA+Shift+7: 读出当前系统的运行时间。</li>
<li>NVDA+Shift+8:显示有关无线连接、ssid 名称和强度的信息,如果没有可用的 ssid,则不显示。</li>
</ul>
<p>您可以通过按键与手势对话框更改这些快捷键。</p>
<h2>使用说明</h2>
<p>此插件不替换 Windows 的任务管理器和其他系统信息程序。另请注意以下事项:</p>
<ul>
<li>如果在安全屏幕中使用该插件,则无法将资源信息复制到剪贴板。</li>
<li>给出的 CPU 使用情况是针对逻辑处理器而非物理核心。这对于使用超线程的处理器来说是显而易见的,其中 CPU 数量是 CPU
核心数量的两倍。在一些较新的计算机上,并非所有 CPU 核心都启用了超线程。</li>
<li>如果存在大量磁盘活动(例如复制大文件),则在获取磁盘使用信息时可能会出现延迟。</li>
<li>所读出的处理器架构信息“x86”和“AMD64”分别指代的是 32 位和 64 位 (x64) Intel 和 AMD 处理器。</li>
<li>此插件需要 Windows 10 或更高版本。</li>
</ul>
<p>关于许可证的说明:此插件使用Psutil,根据与GNU通用公共许可证兼容的3条款BSD许可证进行许可。</p>
<h2>Version 24.04</h2>
<ul>
<li>Updated psutil dependency to 5.9.8.</li>
<li>Added support for speech on demand mode so resource information can be
announced in this mode.</li>
</ul>
<h2>Version 23.11</h2>
<ul>
<li>Downgraded psutil dependency to 5.9.4 due to problems with memory usage
announcements.</li>
</ul>
<h2>Version 23.10</h2>
<ul>
<li>Updated psutil dependency to 5.9.5.</li>
</ul>
<h2>版本23.09</h2>
<ul>
<li>当在 Windows Server 系统上无线网卡不可用时,则 NVDA 不会记录启动错误消息。</li>
</ul>
<h2>版本23.06</h2>
<ul>
<li>修复了由于无线网卡不可用而导致资源监视器无法正常工作的错误。</li>
</ul>
<h2>版本 23.05.1</h2>
<p>NVDA 插件 wlanReporter 的功能已经被包含在资源监视器中。</p>
<ul>
<li><p>使用 wlanReporter 的 Windows API 取代检测无线连接的旧方法
:https://github.com/kvark128/WlanReporter/。</p>
<ul>
<li>在读出 SSID 名称和信号强度后,还会读出网络的安全类型。</li>
<li>在您连接或断开无线网络时,NVDA 会给出提醒。</li>
<li>在您打开或关闭无线网络时,NVDA 会给出提醒。</li>
</ul>
</li>
</ul>
<h2>版本 23.05</h2>
<ul>
<li><p>添加了读出已连接无线网络状态的功能。</p>
<ul>
<li>读出连接的无线 SSID 的名称。</li>
<li>读出 SSID 的强度</li>
<li>如果未检测到,则读出未找到 SSID。</li>
</ul>
</li>
</ul>
<h2>版本 23.02</h2>
<ul>
<li>需要 NVDA 2022.4 或更高版本。</li>
<li>需要 Windows 10 21H2(2021 年 11 月更新/内部版本 19044)或更高版本。</li>
</ul>
<h2>版本 23.01</h2>
<ul>
<li>需要 NVDA 2022.3 或更高版本。</li>
<li>需要 Windows 10 或更高版本,因为自 2023 年 1 月起,Microsoft 不再支持 Windows 7、8 和 8.1。</li>
<li>将 psutil 更新到 5.9.4。</li>
<li>NVDA 会将实际的处理器架构 (x86/AMD64/ARM64) 作为 Windows 版本信息的一部分一并读出。</li>
<li>在单核系统上,NVDA 不再读出 CPU 核心负载,因为平均 CPU 负载与核心负载相同。</li>
</ul>
<h2>版本 22.03</h2>
<p>22.03 版是支持 Windows 7 Service Pack 1、8 和 8.1 的最后一个稳定版。</p>
<ul>
<li>需要 NVDA 2021.3 或更高版本。</li>
<li>试图在 Windows 7、8 和 8.1 上安装插件时将显示一条警告消息。</li>
<li>将 psutil 更新到 5.9.0。</li>
</ul>
<h2>版本 22.01</h2>
<ul>
<li>需要 NVDA 2021.2 或更高版本。</li>
</ul>
<h2>版本 21.10</h2>
<ul>
<li>由于对 NVDA 的更改会影响此插件,因此需要 NVDA 2021.1 或更高版本。</li>
</ul>
<h2>版本21.08</h2>
<ul>
<li>最低 Windows 版本要求现在与 NVDA 版本相关联。</li>
<li>Windows 构建 20348 和 22000 分别被确认为 Windows Server 2022 和 Windows 11。</li>
<li>在 Insider Preview 版本中,不会使用诸如“Windows 10”之类的 Windows 版本。相反,NvDA 将宣布“Windows
Insider”。</li>
<li>在 64 位系统上,处理器架构(x64 或 ARM64)将作为 Windows 版本信息的一部分公布。</li>
</ul>
<h2>版本21.04</h2>
<ul>
<li>需要 NVDA 2020.4 或更高版本。</li>
<li>将 psutil 更新为5.8.0。</li>
<li>当连按两次快捷键将资源信息复制到剪贴板时,NVDA 将读出已复制的资源摘要。</li>
</ul>
<h2>版本21.01</h2>
<ul>
<li>将 psutil 更新为5.7.3。</li>
<li>缩短了 Windows 版本消息。</li>
<li>在 Windows 8.1 上,build.revision 将作为 Windows 版本消息的一部分读出,类似于 Windows 10。</li>
</ul>
<h2>版本20.09</h2>
<ul>
<li>系统正常运行时间现在以天、小时、分钟、秒来呈现。</li>
<li>Windows Server Insider Preview build 20201或更高版本现在被正确识别为Server Insider
build。</li>
</ul>
<h2>版本20.07</h2>
<ul>
<li>在获取Windows版本信息时,正确识别Windows 10版本20H2(NVDA+Shift+6)。</li>
<li>简化Windows 10版本信息,即当按NVDA+Shift+6时,Windows 10 YYMM代替Windows 10verYYMM。</li>
</ul>
<h2>版本20.06</h2>
<ul>
<li>使用 Flake8 解决了许多编码样式问题和潜在错误。</li>
</ul>
<h2>版本20.04</h2>
<ul>
<li>将psutil更新为5.7.0。</li>
</ul>
<h2>版本20.01</h2>
<ul>
<li>由于广泛使用Python 3,因此需要NVDA 2019.3或更高版本。</li>
</ul>
<h2>版本19.11</h2>
<ul>
<li>改进了对Windows Insider Preview版本的检测,尤其是对于20H1及更高版本。</li>
</ul>
<h2>版本19.07</h2>
<ul>
<li>将 psutil 更新为5.6.3。</li>
<li>电池状态通知命令的内部更改。</li>
</ul>
<h2>版本18.12</h2>
<ul>
<li>支持未来 NVDA 版本的内部更改。</li>
</ul>
<h2>版本18.10</h2>
<ul>
<li>代码已经与Python 3更兼容。</li>
<li>将 psutil 更新为5.4.7。</li>
<li>现在,获取磁盘容量和内存使用量时,如果使用计算机或RAM超过1兆字节或磁盘大小的服务,NVDA将不再出错。</li>
<li>内存和磁盘使用的值最多显示两位小数(例如4.00 GB而不是4.0 GB)。</li>
<li>改进了对Windows Insider Preview构建的检测。</li>
</ul>
<h2>版本18.04</h2>
<p>版本18.04.x是支持早于7 SP1的Windows版本的最后一个版本。</p>
<ul>
<li>上一版本支持Windows Server 2003,Vista和Server 2008。</li>
<li>更好地检测Windows 10版本并区分公共和内部预览版本。</li>
</ul>
<h2>版本17.12</h2>
<ul>
<li>在Windows 10上添加了对64位ARM处理器的支持。</li>
</ul>
<h2>版本17.09</h2>
<p>现在:版本17.09.x是支持Windows XP的最后一个版本。</p>
<ul>
<li>上一个版本在Windows XP上运行。</li>
<li>Windows 10内部版本16278及更高版本被识别为版本1709.一旦发布版本1709稳定版本,将发布此插件的次要修订版本。</li>
</ul>
<h2>版本17.07.1</h2>
<ul>
<li>重新引入对Windows XP的支持(从17.02版开始分解)。</li>
</ul>
<h2>版本17.05</h2>
<ul>
<li>现在可以报告系统正常运行时间(自上次启动以来的时间; NVDA + Shift + 7)。</li>
</ul>
<h2>版本17.02</h2>
<ul>
<li>将 psutil 更新为5.0.1。</li>
<li>在检查磁盘使用情况时,NVDA将不再在可移动介质未被正确识别的某些系统上出现错误对话框(例如,当卡未插入读卡器时)。)</li>
</ul>
<h2>版本16.08</h2>
<p>从版本16.08开始,插件版本将显示为year.month.revision。</p>
<ul>
<li>现在可以正确识别Windows 10的各种修订版(例如构建14393的1607)。</li>
<li>Windows 10构建版本(安装累积更新后)已正确识别(例如14393.51)。</li>
<li>如果使用Insider Preview构建,则会认识到这一事实。</li>
</ul>
<h2>版本4.5</h2>
<ul>
<li>附加存储库已移至GitHub(可在https://github.com/josephsl/resourcemonitor找到)。</li>
<li>Windows Server 2016已被正确识别。</li>
</ul>
<h2>版本4.0</h2>
<ul>
<li>将 psutil 更新为2.2.1。</li>
<li>在获取有关CPU负载的信息时,性能得到极大改善。</li>
<li>添加了对Windows 10识别的支持。</li>
<li>在Windows 10中,Windows的内部版本号也将被公布。</li>
<li>现在您可以使用插件管理器来访问插件帮助。</li>
</ul>
<h2>版本3.1</h2>
<ul>
<li>资源监视器正式支持Windows 8.1。</li>
<li>更新翻译。</li>
</ul>
<h2>版本3.0</h2>
<ul>
<li>将 psutil 更新为1.2.1。</li>
<li>报告当前Windows版本,CPU架构和服务包(如果有)(NVDA + Shift + 6)。</li>
<li>可以更改附加快捷键(NVDA 2013.3或更高版本)。</li>
<li>通过按资源快捷键两次,可以将单个资源信息复制到剪贴板。</li>
</ul>
<h2>版本2.4</h2>
<ul>
<li>新的语言:中文(简体),乌克兰语。</li>
<li>更新翻译。</li>
</ul>
<h2>版本2.3</h2>
<ul>
<li>增加保加利亚语翻译。</li>
</ul>
<h2>版本2.2</h2>
<ul>
<li>增加了以下翻译:阿拉伯语,阿拉贡语,克罗地亚语,荷兰语,芬兰语,法语,加利西亚语,德语,匈牙利语,意大利语,日语,韩语,尼泊尔语,波兰语,葡萄牙语(巴西),俄语,斯洛伐克语,斯洛文尼亚语,西班牙语,泰米尔语和土耳其语。</li>
</ul>
<h2>版本2.1</h2>
<ul>
<li>将 psutil 更新为0.6.1。</li>
<li>获取驱动器信息时修复很长时间的延迟。</li>
<li>代码清理。</li>
</ul>
<h2>版本2.0</h2>
<ul>
<li>增加了翻译支持和翻译评论。</li>
</ul>
<h2>版本1.0</h2>
<ul>
<li>发布初始版本</li>
</ul>
Unicode盲文输入http://addons.nvda-project.org/addons/unicodeBrailleInput.zh_CN.html2023-05-10T20:38:33Z2013-03-03T11:53:54Z
<ul>
<li>作者: Mesar Hameed、 Patrick Zajda、 Leonard de Ruijter。</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=unicodeBrailleInput">稳定版</a></li>
</ul>
<p>此插件允许您将文本从盲文(例如 1345-1236-145-1)转换为 Unicode 盲文字符。您还可以根据当前选择的输入盲文表转换文本。</p>
<p>这个专用插件的目的是更容易帮助改进 liblouis 表并为您的语言添加自动测试。随着 NVDA 2017.3 中添加了 unicode
盲文表,此插件不再需要,因为用户可以选择使用新表输入盲文。但是,这个插件仍然可以帮助根据特定的输入表将普通文本转换为 unicode 盲文。</p>
<h2>使用方法</h2>
<ul>
<li>打开一个支持 unicode 的文本编辑器(例如 Notepad++)。</li>
<li>按 NVDA+Ctrl+U 或选择 NVDA 工具菜单下的 Unicode 盲文输入。</li>
<li>根据当前的盲文表选择您的输入是由盲文点(例如 1345-1236-145-1)还是普通文本(例如荷兰语(荷兰))组成。</li>
<li>分别以数字形式或普通文本键入您的盲文文本。</li>
<li>按OK。</li>
<li>所需的unicode字符将被复制到您的剪贴板以供您粘贴。</li>
</ul>
<h2>3.0更新日志</h2>
<ul>
<li>新维护者:Leonard de Ruijter。</li>
<li>插件与 Python 3 兼容,因此与 NVDA 2019.3 及更高版本兼容。</li>
<li>添加了根据当前选择的输入盲文表从普通文本创建 unicode 盲文的功能。</li>
</ul>
<h2>2.0 更新日志</h2>
<ul>
<li>插件帮助可从插件管理器获得。</li>
</ul>
<h2>版本1.1</h2>
<ul>
<li>改善延迟以允许公告被正确听取。</li>
<li>许多新的翻译。</li>
<li>在NVDA帮助菜单下添加文档。</li>
<li>添加了一个复选框,可以用常规空格字符替换空格盲文(字符0x2800)。</li>
<li>现在可以使用Tools类别下的NVDA手势输入对话框重新分配快捷键。</li>
</ul>
<h2>1.0更新日志</h2>
<ul>
<li>发布初始版本</li>
<li>新增法语翻译</li>
</ul>
及时翻译http://addons.nvda-project.org/addons/instantTranslate.zh_CN.html2023-07-15T02:39:11Z2013-01-31T07:50:27Z
<ul>
<li>作者: Alexy Sadovoy, Beqa Gozalishvili, Mesar Hameed, Alberto Buffolino and
other NVDA contributors.</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=instantTranslate">稳定版</a></li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=it-dev">开发板</a></li>
</ul>
<p>此插件借助 Google 的翻译服务,实现将所选文本和(或)剪贴板中的文本从一种语言翻译为另一种语言。</p>
<h2>配置语言</h2>
<p>要配置翻译的原语言、目标语言以及自动切换的语言,请转到: NVDA 菜单 >> 选项 >> 设置 >> 及时翻译设置面板。</p>
<p>有“源语言”和“目标语言”的两个组合框,以及一个用于控制是否在翻译之后将翻译结果复制到剪贴板的复选框。</p>
<p>两个语言组合框和复制到剪贴板的作用很清楚,但还应该有些其他的说明。请注意,下面的解释假设您在“原语言”组合中选择了“自动”选项。</p>
<p>两个语言组合框和复制到剪贴板的作用很清楚,但还应该有些其他的说明。请注意,下面的解释假设您在“原语言”组合中选择了“自动”选项。</p>
<p>当您使用“切换源语言和目标语言”功能时,“语言切换”组合框很有用;实际上,当原语言设置为自动时,目标语言是无意义的,所以插件将使用上面“语言切换”组合框中所指定的语言。</p>
<p>不妨想象一下这种情况:你通常从一种语言翻译成简体中文(你的母语),但有时候(例如,当你写一篇文档时)你需要翻译成英语(你的第二语言,假设);你可以将“语言切换”组合框设置为“英语”,这样你就可以从简体中文翻译成英语,而无需转到插件设置去调整。</p>
<p>“自动切换”复选框:当且仅当您在“源语言”组合框中设置为“自动”时它才会显示,并且跟“语言切换”组合框直接关联,如果您选中该复选框,当元语言跟目标语言相同时,则插件会尝试自动交换元语言和目标语言进行翻译。</p>
<p>一个简单的例子:再考虑上面假设的情况;如果你将非简体中文的文本翻译为简体中文,这没有问题,你会直接得到翻译结果,但如果你翻译的文本恰恰也是简体中文,你就会得到与原文相同的翻译结果,如果勾选这个复选框,插件就会将简体中文翻译为英语,这就是理想的效果了。</p>
<p>不过有一些短文本无法自动识别语言,这时候请使用“切换源语言和目标语言”功能来手动切换。</p>
<p>使用多语言的情况,您可以在 NVDA 语音设置参数对话框中勾选自动语言切换复选框,这样,翻译后的结果将以相应语言的语音进行朗读。</p>
<h2>使用</h2>
<p>您可以通过三种方式使用此插件:</p>
<ol>
<li>使用 Shift + 光标键选择文本的功能选择一些文本(例如,使用光标键移动)并按翻译的快捷键进行翻译。翻译结果将以相应语言的语音朗读出来。</li>
<li>您还可以翻译剪贴板中的文本。</li>
<li>更有用的是,您也可以翻译 NVDA 最后依次朗读的文本。</li>
</ol>
<h2>快捷键</h2>
<p>以下单字母快捷键需要先按下 NVDA + Shift + T 进入命令接收面板后才可使用。</p>
<ul>
<li>T:翻译所选文本,</li>
<li>Shift + t:翻译剪贴板文本,</li>
<li>S:切换源语言和目标语言,</li>
<li>A:朗读元语言和目标语言,</li>
<li>C:拷贝翻译结果到剪贴板</li>
<li>I:显示当前文本的语言,</li>
<li>L: 翻译最后依次朗读的文本,</li>
<li>O: 打开翻译设置对话框,</li>
<li>H:读出所有可用的快捷键(帮助信息)。</li>
</ul>
<h2>4.4.3 的变化</h2>
<ul>
<li>添加了用空格替换下划线的功能,可能会根据上下文提供更好的翻译结果(感谢 Beka Gozalishvili)</li>
<li>增加了对 NVDA 2022.1 的兼容性</li>
</ul>
<h2>4.4.2 的变化</h2>
<ul>
<li>恢复了语言检测和自动交换(感谢Cyrille的修复)。</li>
<li>更新翻译语言(感谢Cyrille)。</li>
</ul>
<h2>4.4 的变化</h2>
<ul>
<li>即时翻译现在与 NVDA 2019.3(Python 3 版本)兼容</li>
</ul>
<h2>4.3 的变化</h2>
<ul>
<li>NVDA 兼容性修复 现在即时翻译可以在最新的 NVDA 上运行。</li>
<li>找到了一种方法来再次使用谷歌作为翻译服务。</li>
</ul>
<h2>4.2 的变化</h2>
<ul>
<li>恢复了与新版 NVDA 的兼容。</li>
<li>恢复了自动语言检测功能。</li>
</ul>
<h2>4.1 的变化</h2>
<ul>
<li>InstantTranslate 恢复,现在使用 Yandex翻译服务,而非谷歌。</li>
</ul>
<h2>4.0 的变化</h2>
<ul>
<li>语言交换后自动执行翻译。</li>
<li>缓存的错误修复。</li>
</ul>
<h2>3.0 的变化</h2>
<ul>
<li>更改了快捷键的使用方式,现在您可以按instantTranslate修饰键“NVDA + Shift +
t”,然后按单字母键执行某些操作(请参阅“快捷键”部分中的所有单字母快捷键)。</li>
<li>实现了交换语言。</li>
<li>更改了配置格式,现在我们可以更改及时翻译的设置,如果我们在只读窗格中,但请记住,这将在首次重新启动NVDA之前工作。</li>
<li>解除了可翻译文本数量的限制。</li>
<li>向“即时翻译设置”菜单项添加了快捷键 t</li>
<li>“自动”选项现在位于元语言组合框中的第一个位置,并且在目标语言组合框中不显示。</li>
<li>添加了用于复制翻译结果的复选框。</li>
<li>将配置文件存储在设置文件夹的根目录中。</li>
<li>源语言和目标语言与Google翻译目前公开的内容同步(2015年4月22日)。</li>
</ul>
<h2>2.1的变化</h2>
<ul>
<li>现在,当您按nvda + shift + y时,插件可以从剪贴板翻译文本。</li>
</ul>
<h2>2.0 的变化</h2>
<ul>
<li>添加了gui配置,您可以在其中选择源语言和目标语言。</li>
<li>添加了首选项菜单下的插件菜单项。</li>
<li>现在设置会写入到单独的配置文件中。</li>
<li>翻译结果现在会自动复制到剪贴板以备将来操作。</li>
</ul>
<h2>1.0的变化</h2>
<ul>
<li>发布初始版本</li>
</ul>
NVDA光学字符识别插件http://addons.nvda-project.org/addons/ocr.zh_CN.html2023-05-10T20:38:33Z2013-01-23T06:25:19Z
<ul>
<li>作者:NV Access Limited,Lukasz Golonka和其他贡献者</li>
<li>NVDA兼容版本:2019.3以上</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=ocr">稳定版</a></li>
<li>下载 <a href="https://www.nvaccess.org/files/nvda-addons/ocr_0.20120529.01.nvda-addon">与NVDA 2019.2兼容的版本</a></li>
</ul>
<p>重要提示:如果您在 Windows 10 上使用 NVDA 2017.3 或更高版本,请考虑使用内置的 Windows 10 OCR。</p>
<p>执行光学字符识别(OCR)以从无法访问的对象中提取文本。使用Tesseract OCR引擎。要执行OCR,请使用对象导航移动到相关对象,然后按NVDA
+ r。您可以通过转到NVDA首选项菜单并选择OCR设置来设置OCR识别语言。另外还可以从NVDA输入手势对话框的“其他”类别中重新分配键盘快捷键。</p>
<h2>更改日志:</h2>
<h3>2.1的更改:</h3>
<ul>
<li>当在编辑字段上执行识别时,现在可以使用系统输入焦点来导航,而无需将焦点从结果移开后再次返回。</li>
<li>Tesseract release info is no longer written to the focused console.</li>
<li>当未识别出任何文本时,将提示用户。</li>
<li>不再尝试在不可见的对象上进行识别。</li>
<li>WX is now used to capture images instead of Pillow.</li>
</ul>
<h3>2.0版的更改:</h3>
<ul>
<li>NVDA兼容版本:2019.3以上。</li>
<li>可以为不同的配置文件设置不同的识别语言。</li>
<li>现在可以从 NVDA 设置对话框更改 OCR 设置,而不是从工具菜单中的单独对话框更改。</li>
</ul>
extended-NVDAWinamp 支持插件http://addons.nvda-project.org/addons/extendedWinamp.zh_CN.html2023-05-10T20:38:33Z2013-01-16T02:37:38Z
<ul>
<li>作者: Hrvoje Katic, Beqa Gozalishvili and NVDA-addon-team</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=extendedWinamp">稳定版</a></li>
<li>NVDA 兼容版本:2020.1 或更高</li>
</ul>
<p>这个插件模块扩展了NVDA中的原始Winamp 应用模块,具有一些额外的功能。</p>
<ul>
<li>S:打开/关闭随机播放</li>
<li>R:打开/关闭重复</li>
<li>F5:静音播放</li>
<li>F6:设置播放音量为25%</li>
<li>F7:设置播放音量为50%</li>
<li>F8:设置播放音量为100%</li>
<li>Shift+左光标:向左平移</li>
<li>Shift+右光标:向右平移</li>
<li>Shift+上光标:平移中心</li>
<li>Control+Shift+T:读出总音轨长度</li>
<li>Control+Shift+E:读出曲目已用时间</li>
<li>Control+Shift+R:读出曲目剩余时间</li>
<li>Shift+R:播放曲目结尾“默认为最后 6 秒”</li>
<li>Control+R:设置播放时间“以秒为单位”以与“播放曲目结尾”命令一起使用</li>
<li>Shift+J:设置交替跳跃时间“以秒为单位”</li>
<li>Control+右光标:向后跳转“默认 6 秒”</li>
<li>Control+左光标:向前跳转“默认 6 秒”</li>
</ul>
<h2>版本2.0</h2>
<ul>
<li>解决了 Flake8 的许多编码风格问题和潜在错误。</li>
<li>与 NVDA 2021.1 兼容。</li>
</ul>
<h2>版本1.2</h2>
<ul>
<li>更新了插件以适用于 NVDA 2019.3 及更高版本。</li>
<li>新语言:克罗地亚语、波兰语、简体中文。</li>
</ul>
<h2>版本1.1</h2>
<ul>
<li>新语言:阿拉贡语、阿拉伯语、荷兰语、德语、芬兰语、法语、加利西亚语、匈牙利语、意大利语、日语、韩语、尼泊尔语、葡萄牙语(巴西)、俄语、斯洛伐克语、斯洛文尼亚语、西班牙语、泰米尔语、土耳其语。</li>
</ul>
<h2>版本1.0</h2>
<ul>
<li>发布初始版本</li>
</ul>
dropbox 支持插件http://addons.nvda-project.org/addons/dropbox.zh_CN.html2023-05-10T20:38:33Z2012-09-16T16:27:07Z
<ul>
<li>作者: Patrick ZAJDA, Filaos和其他贡献者</li>
<li>NVDA兼容版本: 2019.1 或更高版本</li>
<li>下载<a href="https://www.nvaccess.org/addonStore/legacy?file=dropbox">稳定版 version</a></li>
<li>下载<a href="https://www.nvaccess.org/addonStore/legacy?file=dropbox">开发板 version</a></li>
</ul>
<p>此插件添加了快捷方式以宣布Dropbox的状态或分别按下一次或两次时打开Dropbox的系统托盘菜单。它还增强了DropBox项目列表。</p>
<ul>
<li>快捷键: NVDA + Alt + D</li>
</ul>
<h2>版本4.6</h2>
<ul>
<li>指定 NVDA 2021.1 兼容性</li>
</ul>
<h2>版本4.4</h2>
<ul>
<li>兼容Python 3</li>
<li>使用最新的插件模板</li>
<li>现在存储库使用Appveyor构建插件</li>
<li>修复了错误并删除了文档中未使用的快捷方式</li>
<li>更新仍参考版本公告的文档中的描述</li>
</ul>
<h2>版本4.0</h2>
<ul>
<li>插件管理器现在提供了插件帮助。</li>
<li>获取Dropbox状态的快捷方式已更改为Alt + NVDA + D,以避免与音频闪避支持冲突。</li>
</ul>
<h2>版本3.1</h2>
<ul>
<li>使用其他方法来访问“取消”按钮和页面选项卡,我们不必一定使用快捷键聚焦在他们的上面。</li>
<li>当更改激活的选项卡时,如果按下“Tab”键,焦点会移动到选项卡页面,第一个选项卡会被激活,而并非上次使用的选项卡,即使他从未被激活。</li>
<li>在“偏好”对话框中,无法通过按下"“CTRL加上下光标键”在选项卡之间切换,“CTRL加Tab”和“CTRL加Shift加Tab”仍然可用。</li>
<li>所有的本地化manifest文件现在都已经好了。</li>
<li>小的改动。</li>
</ul>
<h2>3.0的更新</h2>
<ul>
<li>为完善的清单文件修正。</li>
<li>完善上下文菜单检测,可连续三次按下组合键“Shift+NVDA+D”实现。</li>
<li>“退出”按钮有效(仅当 DropBox使用的语言与 NVDA相同时)。</li>
<li>许多代码的修正。</li>
<li>增加/更新所有脚本的文档。</li>
<li>新语言支持:包括阿拉伯语巴西葡萄牙语、捷克语、荷兰语、芬兰语、加利西亚与、德语、匈牙利语、日本语、尼泊尔语、波兰语、俄语、西班牙语、斯洛伐克语、坦尼耳语、
土耳其语。</li>
</ul>
<h2>2.0的更新</h2>
<ul>
<li>新语言:意大利语</li>
<li>当托盘菜单打开时,极使重复按下该快捷键多次也不会再产生任何故障。</li>
</ul>
<h2>1.0的更新</h2>
<ul>
<li>初始版本</li>
</ul>
systrayList托盘图标插件http://addons.nvda-project.org/addons/systrayList.zh_CN.html2023-05-10T20:38:33Z2012-09-16T16:27:07Z
<ul>
<li>作者: Rui Fontes, Rui Batista, Joseph Lee, NVDA Community contributors</li>
<li>下载 <a href="https://www.nvaccess.org/addonStore/legacy?file=systrayList">稳定版</a></li>
<li>NVDA compatibility: 2019.3 and beyond</li>
</ul>
<p>此插件允许您在列表框中读取和激活系统托盘或任务栏上的图标,以便于访问和浏览这些项目。安装了插件后,按NVDA +
f11一次,此对话框弹出系统托盘窗口,然后按两次显示任务栏窗口。</p>
<p>注意,您可以使用Windows + B访问任何屏幕阅读器软件中的Windows系统托盘,按Windows + T可以访问任务栏。此插件仅用于使从JAWS
for Windows的过渡更顺畅,并避免在使用Windows键盘装置循环通过系统托盘时可能弹出的一些工具提示。</p>
<h2>Changes for 4.0 - 2020-01-03</h2>
<ul>
<li>要求 NVDA 2019.3或更高。</li>
<li>早于Windows 7 Service Pack 1的Windows版本支持现在已结束。</li>
<li>插件已更名为“ SysTrayList”。</li>
<li>安装或更新插件时,将不再显示“捐赠请求”对话框。</li>
</ul>
<h2>Changes for 3.2 - 2018-12-24</h2>
<ul>
<li>更多代码更改以支持Python 3。</li>
</ul>
<h2>Changes for 3.1 - 2018-11-24</h2>
<ul>
<li>当前,内部更改以支持以后的NVDA版本。</li>
</ul>
<h2>Changes for 3.0 - 2018-10-25</h2>
<p>早于Windows 7 Service Pack 1的Windows版本支持将于2019年结束。</p>
<ul>
<li>插件现在与Python 3兼容。</li>
</ul>
<h2>Changes for 2.0 - 2017-05-20</h2>
<ul>
<li>系统托盘/任务栏对话框现在居中显示在屏幕上。</li>
<li>修复了各种用户界面问题。</li>
<li>更新新的翻译。</li>
</ul>
<h2>Changes for 1.5 - 2015-mm-dd</h2>
<ul>
<li>更正了左/右点击动作。</li>
<li>现在可以从插件管理器获得插件帮助。</li>
<li>更新翻译。</li>
</ul>
<h2>版本1.4 - 2013-01-19</h2>
<ul>
<li>要求 NVDA 2012.3 Beta1或更高。</li>
<li>将捐赠请求添加到安装过程</li>
<li>实现了任务栏支持</li>
<li>新的语言支持:
包括阿拉伯语、荷兰语、芬兰语、加利西亚与、希腊语、匈牙利语、意大利语、日本语、韩语、尼泊尔语、波兰语、八溪葡萄牙语、俄语、斯洛伐克语、坦尼耳语、繁体中文香港。</li>
</ul>
<h2>1.3的更新 - 2012-05-25</h2>
<ul>
<li>转换为插件包</li>
<li>法语和土耳其语的语言支持。</li>
</ul>
<h2>1.2的更新 - 2012-04.25</h2>
<ul>
<li>西班牙语和德语更新。感谢所有贡献者。</li>
</ul>
<h2>1.1的更新 - 2012-03-20</h2>
<ul>
<li>修复了在gettext转换不可用时无法使用该插件的错误</li>
</ul>
<h2>1.0的更新 - 2012-03-19</h2>
<ul>
<li>初始版本</li>
</ul>